DELL-NETWORKING-BPSTATS-MIB
Force10 Networks, Inc.Dell Networking OS Back plane statistics mib. This is MIB shall use for all back plane statistics related activities. This includes the BP ports traffic statistics. BP link bundle monitoring based on BP port statistics. Queue statistics and buffer utilization on BP ports etc ..
snmptranslate -m DELL-NETWORKING-BPSTATS-MIB -Tpsnmpwalk -v2c -c <community> -m DELL-NETWORKING-BPSTATS-MIB <host> 1.3.6.1.4.1.6027.3.24Imports
| DELL-NETWORKING-SMI | dellNetMgmt |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdellNetBpStatsMib | 1.3.6.1.4.1.6027.3.24 | |||
identity Dell Networking OS Back plane statistics mib. This is MIB shall use for all back plane statistics related activities. This includes the BP ports traffic statistics. BP link bundle monitoring based on BP port statistics. Queue statistics and buffer utilization on BP ports etc .. | ||||
| NdellNetBpStatsLinkBundleObjects | 1.3.6.1.4.1.6027.3.24.1 | |||
| NbpLinkBundleObjects | 1.3.6.1.4.1.6027.3.24.1.1 | |||
| SbpLinkBundleRateInterval | 1.3.6.1.4.1.6027.3.24.1.1.1 | INTEGER (10..299) | RW | |
scalar · INTEGER (10..299) · read-write · current The rate interval for polling the Bp link bundle Monitoring. | ||||
| SbpLinkBundleTriggerThreshold | 1.3.6.1.4.1.6027.3.24.1.1.2 | INTEGER (1..90) | RW | |
scalar · INTEGER (1..90) · read-write · current The traffic distribution trigger threshold for Bp link bundle Monitoring.In percentage of total bandwidth of the link Bundle
| ||||
| NdellNetBpStatsObjects | 1.3.6.1.4.1.6027.3.24.2 | |||
| NbpStatsObjects | 1.3.6.1.4.1.6027.3.24.2.1 | |||
| TbpDropsTable | 1.3.6.1.4.1.6027.3.24.2.1.1 | NA | ||
table · not-accessible · current The back plane drops table contains the list of various drops per BP higig port per BCM unit in a stack unit(card type). | ||||
| RbpDropsEntry | 1.3.6.1.4.1.6027.3.24.2.1.1.1 | NA | ||
row · not-accessible · current Each drops entry is being indexed by StackUnit(card Type) BCM unit ID and local Port Id | ||||
| CbpDropsStackUnitIndex | 1.3.6.1.4.1.6027.3.24.2.1.1.1.1 | INTEGER (1..12) | NA | |
column · INTEGER (1..12) · not-accessible · current Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | ||||
| CbpDropsPortPipe | 1.3.6.1.4.1.6027.3.24.2.1.1.1.2 | INTEGER (1..6) | NA | |
column · INTEGER (1..6) · not-accessible · current bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | ||||
| CbpDropsPortIndex | 1.3.6.1.4.1.6027.3.24.2.1.1.1.3 | INTEGER (1..128) | NA | |
column · INTEGER (1..128) · not-accessible · current BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | ||||
| CbpDropsInDrops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The No of Ingress packet Drops | ||||
| CbpDropsInUnKnownHgHdr | 1.3.6.1.4.1.6027.3.24.2.1.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The No of Unknown hiGig header Ingress packet Drops | ||||
| CbpDropsInUnKnownHgOpcode | 1.3.6.1.4.1.6027.3.24.2.1.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The No of Unknown hiGig Opcode Ingress packet Drops | ||||
| CbpDropsInMTUExceeds | 1.3.6.1.4.1.6027.3.24.2.1.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current No of packets dropped on Ingress because of MTUExceeds | ||||
| CbpDropsInMacDrops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current No of packets dropped on Ingress MAC | ||||
| CbpDropsMMUHOLDrops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current No of packets dropped in MMU because of MMU HOL Drops | ||||
| CbpDropsEgMacDrops | 1.3.6.1.4.1.6027.3.24.2.1.1.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current No of packets dropped on Egress MAC | ||||
| CbpDropsEgTxAgedCounter | 1.3.6.1.4.1.6027.3.24.2.1.1.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current No of Aged packets dropped on Egress | ||||
| CbpDropsEgTxErrCounter | 1.3.6.1.4.1.6027.3.24.2.1.1.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current No of Error packets dropped on Egress | ||||
| CbpDropsEgTxMACUnderflow | 1.3.6.1.4.1.6027.3.24.2.1.1.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current No of MAC underflow packets dropped on Egress | ||||
| CbpDropsEgTxErrPktCounter | 1.3.6.1.4.1.6027.3.24.2.1.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current No of total packets dropped in Egress | ||||
| TbpIfStatsTable | 1.3.6.1.4.1.6027.3.24.2.1.2 | NA | ||
table · not-accessible · current The back plane counter statistics table contains the list of various counters per BP higig port per BCM unit in a stack unit(card type). | ||||
| RbpIfStatsEntry | 1.3.6.1.4.1.6027.3.24.2.1.2.1 | NA | ||
row · not-accessible · current Each Stats entry is being indexed by StackUnit(card Type) BCM unit ID and local Port Id | ||||
| CbpIfStatsStackUnitIndex | 1.3.6.1.4.1.6027.3.24.2.1.2.1.1 | INTEGER (1..12) | NA | |
column · INTEGER (1..12) · not-accessible · current Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | ||||
| CbpIfStatsPortPipe | 1.3.6.1.4.1.6027.3.24.2.1.2.1.2 | INTEGER (1..6) | NA | |
column · INTEGER (1..6) · not-accessible · current bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | ||||
| CbpIfStatsPortIndex | 1.3.6.1.4.1.6027.3.24.2.1.2.1.3 | INTEGER (1..128) | NA | |
column · INTEGER (1..128) · not-accessible · current BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | ||||
| CbpIfStatsIn64BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but including FCS octets). | ||||
| CbpIfStatsIn65To127BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| CbpIfStatsIn128To255BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| CbpIfStatsIn256To511BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| CbpIfStatsIn512To1023BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). | ||||
| CbpIfStatsInOver1023BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames. | ||||
| CbpIfStatsInThrottles | 1.3.6.1.4.1.6027.3.24.2.1.2.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is received. | ||||
| CbpIfStatsInRunts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. | ||||
| CbpIfStatsInGiants | 1.3.6.1.4.1.6027.3.24.2.1.2.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames. | ||||
| CbpIfStatsInCRC | 1.3.6.1.4.1.6027.3.24.2.1.2.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC. | ||||
| CbpIfStatsInOverruns | 1.3.6.1.4.1.6027.3.24.2.1.2.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames has been chosen to be dropped by detecting the buffer issue | ||||
| CbpIfStatsOutUnderruns | 1.3.6.1.4.1.6027.3.24.2.1.2.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames dropped because of buffer underrun. | ||||
| CbpIfStatsOutUnicasts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of Unicast frames are transmitted out of the interface | ||||
| CbpIfStatsOutCollisions | 1.3.6.1.4.1.6027.3.24.2.1.2.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current A count of the frames that due to excessive or late collisions are not transmitted successfully. | ||||
| CbpIfStatsOutWredDrops | 1.3.6.1.4.1.6027.3.24.2.1.2.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames are dropped by using WRED policy due to excessive traffic. | ||||
| CbpIfStatsOut64BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of valid frames with the block of 64 byte size is transmitted | ||||
| CbpIfStatsOut65To127BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current The total of valid frame with the block size of range between 65 and 127 bytes are transmitted. | ||||
| CbpIfStatsOut128To255BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.21 | Counter64 | RO | |
column · Counter64 · read-only · current The total of valid frame with the block size of range between 128 and 255 bytes are transmitted | ||||
| CbpIfStatsOut256To511BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.22 | Counter64 | RO | |
column · Counter64 · read-only · current The total of valid frame with the block size of range between 256 and 511 bytes are transmitted | ||||
| CbpIfStatsOut512To1023BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.23 | Counter64 | RO | |
column · Counter64 · read-only · current The total of valid frame with the block size of range between 512 and 1023 bytes are transmitted | ||||
| CbpIfStatsOutOver1023BytePkts | 1.3.6.1.4.1.6027.3.24.2.1.2.1.24 | Counter64 | RO | |
column · Counter64 · read-only · current The total of valid frame with the block size of greater than 1023 bytes are transmitted. | ||||
| CbpIfStatsOutThrottles | 1.3.6.1.4.1.6027.3.24.2.1.2.1.25 | Counter64 | RO | |
column · Counter64 · read-only · current This counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent. | ||||
| CbpIfStatsLastDiscontinuityTime | 1.3.6.1.4.1.6027.3.24.2.1.2.1.26 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value. | ||||
| CbpIfStatsInCentRate | 1.3.6.1.4.1.6027.3.24.2.1.2.1.27 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This is the percentage of maximum line rate at which data is receiving on the Interface. For Z9000 - BP hiGig line rate is 42G. This is an integer value which can go from 0% to 100%. | ||||
| CbpIfStatsOutCentRate | 1.3.6.1.4.1.6027.3.24.2.1.2.1.28 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This is the percentage of maximum line rate at which data is sending on the Interface. For Z9000 - BP hiGig line rate is 42G. This is an integer value which can go from 0% to 100%. | ||||
| CbpIfStatsLastChange | 1.3.6.1.4.1.6027.3.24.2.1.2.1.29 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime, on which all the counters are updated recently | ||||
| TbpPacketBufferTable | 1.3.6.1.4.1.6027.3.24.2.1.3 | NA | ||
table · not-accessible · current The packet buffer table contains the modular packet buffers details per stack unit and the mode of allocation. | ||||
| RbpPacketBufferEntry | 1.3.6.1.4.1.6027.3.24.2.1.3.1 | NA | ||
row · not-accessible · current Packet buffer details per NPU unit. | ||||
| CbpPacketBufferStackUnitIndex | 1.3.6.1.4.1.6027.3.24.2.1.3.1.1 | INTEGER (1..12) | NA | |
column · INTEGER (1..12) · not-accessible · current Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | ||||
| CbpPacketBufferPortPipe | 1.3.6.1.4.1.6027.3.24.2.1.3.1.2 | INTEGER (1..6) | NA | |
column · INTEGER (1..6) · not-accessible · current bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | ||||
| CbpPacketBufferTotalPacketBuffer | 1.3.6.1.4.1.6027.3.24.2.1.3.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Total packet buffer in this NPU unit. | ||||
| CbpPacketBufferCurrentAvailBuffer | 1.3.6.1.4.1.6027.3.24.2.1.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Current available buffer in this NPU unit. | ||||
| CbpPacketBufferPacketBufferAlloc | 1.3.6.1.4.1.6027.3.24.2.1.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Static or Dynamic allocation. | ||||
| TbpBufferStatsTable | 1.3.6.1.4.1.6027.3.24.2.1.4 | NA | ||
table · not-accessible · current The back plane stats per port table contains the packet buffer usage per bp port per NPU unit. | ||||
| RbpBufferStatsEntry | 1.3.6.1.4.1.6027.3.24.2.1.4.1 | NA | ||
row · not-accessible · current Per bp port buffer stats | ||||
| CbpBufferStatsStackUnitIndex | 1.3.6.1.4.1.6027.3.24.2.1.4.1.1 | INTEGER (1..12) | NA | |
column · INTEGER (1..12) · not-accessible · current Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | ||||
| CbpBufferStatsPortPipe | 1.3.6.1.4.1.6027.3.24.2.1.4.1.2 | INTEGER (1..6) | NA | |
column · INTEGER (1..6) · not-accessible · current bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | ||||
| CbpBufferStatsPortIndex | 1.3.6.1.4.1.6027.3.24.2.1.4.1.3 | INTEGER (1..128) | NA | |
column · INTEGER (1..128) · not-accessible · current BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | ||||
| CbpBufferStatsCurrentUsagePerPort | 1.3.6.1.4.1.6027.3.24.2.1.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Current buffer usage per bp port. | ||||
| CbpBufferStatsDefaultPacketBuffAlloc | 1.3.6.1.4.1.6027.3.24.2.1.4.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Default packet buffer allocated. | ||||
| CbpBufferStatsMaxLimitPerPort | 1.3.6.1.4.1.6027.3.24.2.1.4.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Max buffer limit per bp port. | ||||
| TbpCosStatsTable | 1.3.6.1.4.1.6027.3.24.2.1.5 | NA | ||
table · not-accessible · current The back plane statistics per COS table gives packet buffer statistics per COS per bp port. | ||||
| RbpCosStatsEntry | 1.3.6.1.4.1.6027.3.24.2.1.5.1 | NA | ||
row · not-accessible · current Per bp port buffer stats and per COS buffer stats. | ||||
| CbpCosStatsStackUnitIndex | 1.3.6.1.4.1.6027.3.24.2.1.5.1.1 | INTEGER (1..12) | NA | |
column · INTEGER (1..12) · not-accessible · current Stack unit(Card Type Id) number where this port present Each card shall contain more than one BCM units | ||||
| CbpCosStatsPortPipe | 1.3.6.1.4.1.6027.3.24.2.1.5.1.2 | INTEGER (1..6) | NA | |
column · INTEGER (1..6) · not-accessible · current bpPortPipe denotes the BCM unit in the stack unit(card Type) Each BCM unit shall contain 1-128 local ports, which includes BP as well as front end ports | ||||
| CbpCosStatsPortIndex | 1.3.6.1.4.1.6027.3.24.2.1.5.1.3 | INTEGER (1..128) | NA | |
column · INTEGER (1..128) · not-accessible · current BP port number. Maximum ports shall support by Trident2 BCM npu is 128. This address space includes FE ports also, which are invalid ports as far as BP is concern. For Z9000 leaf BCM units, 34 to 41 are the valid BP port numbers and for spine BCM units, 1 to 16 are the valid BP ports | ||||
| CbpCosStatsCOSNumber | 1.3.6.1.4.1.6027.3.24.2.1.5.1.4 | INTEGER (1..21) | NA | |
column · INTEGER (1..21) · not-accessible · current COS queue number, There shall 12 unicast and 9 multicast queues per port in Trident2 | ||||
| CbpCosStatsCurrentUsage | 1.3.6.1.4.1.6027.3.24.2.1.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current Current buffer usage per COS per bp port. | ||||
| CbpCosStatsDefaultPacketBuffAlloc | 1.3.6.1.4.1.6027.3.24.2.1.5.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current Default packet buffer allocated per COS queue | ||||
| CbpCosStatsMaxLimit | 1.3.6.1.4.1.6027.3.24.2.1.5.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Max buffer utilization limit per bp port. | ||||
| CbpCosStatsHOLDDrops | 1.3.6.1.4.1.6027.3.24.2.1.5.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current HOLD Drops Per Queue. | ||||
| NdellNetBpStatsAlarms | 1.3.6.1.4.1.6027.3.24.3 | |||
| NbpLinkBundleNotifications | 1.3.6.1.4.1.6027.3.24.3.1 | |||
| !bpLinkBundleImbalance | 1.3.6.1.4.1.6027.3.24.3.1.1 | |||
notification · current Trap generated when traffic imbalance observed in BP Link Bundles | ||||
| !bpLinkBundleImbalanceClear | 1.3.6.1.4.1.6027.3.24.3.1.2 | |||
notification · current Trap generated when traffic imbalance is no longer observed on Bp Link bundles | ||||
| NbpLinkBundleAlarmVariable | 1.3.6.1.4.1.6027.3.24.3.2 | |||
| SbpLinkBundleType | 1.3.6.1.4.1.6027.3.24.3.2.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Indicates Type of Back plane HiGig link bundle
| ||||
| SbpLinkBundleSlot | 1.3.6.1.4.1.6027.3.24.3.2.2 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The SlotId on which Link Bundle is overloaded | ||||
| SbpLinkBundleNpuUnit | 1.3.6.1.4.1.6027.3.24.3.2.3 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The npuUnitId(BCM unit Id) on which Link Bundle is overloaded | ||||
| SbpLinkBundleLocalId | 1.3.6.1.4.1.6027.3.24.3.2.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The local linkBundle Id which is overloaded | ||||
Traps / Notifications
- bpLinkBundleImbalance
1.3.6.1.4.1.6027.3.24.3.1.1 - bpLinkBundleImbalanceClear
1.3.6.1.4.1.6027.3.24.3.1.2