DMswitch-MIB
Teracom Telematica Ltda.The MIB module for DMswitch.
snmptranslate -m DMswitch-MIB -Tpsnmpwalk -v2c -c <community> -m DMswitch-MIB <host> 1.3.6.1.4.1.3709.3.5.201Imports
| DATACOM-SMI | datacomAccessDevicesMIBs |
|---|---|
| IF-MIB | InterfaceIndex |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IdmSwitchMIB | 1.3.6.1.4.1.3709.3.5.201 | ||||||||||||
identity The MIB module for DMswitch. | |||||||||||||
| NdmSwitchMIBObjects | 1.3.6.1.4.1.3709.3.5.201.1 | ||||||||||||
| NswitchMgt | 1.3.6.1.4.1.3709.3.5.201.1.1 | ||||||||||||
| SswitchNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.1 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The total number of switches present on this system. | |||||||||||||
| TswitchInfoTable | 1.3.6.1.4.1.3709.3.5.201.1.1.2 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about switches in this system. | |||||||||||||
| RswitchInfoEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about a single switch in this system.
| |||||||||||||
| CswUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | |||||||||||||
| CswHardwareVer | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.2 | INTEGER | RO | 10 | |||||||||
column · INTEGER · read-only · current Hardware version of the main board. Example values from LibreNMS test devices
| |||||||||||||
| CswBootLoaderVer | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.3 | DisplayString (SIZE (0..20)) | RO | 2.4 | |||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Loader version of the main board. Example values from LibreNMS test devices
| |||||||||||||
| CswFirmwareVer | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.4 | DisplayString (SIZE (0..20)) | RO | 15.2.16 | |||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Operation code version of the main board. Example values from LibreNMS test devices
| |||||||||||||
| CswPortNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.5 | Integer32 | RO | 28 | |||||||||
column · Integer32 · read-only · current The total port number of this switch (including expansion slot). Example values from LibreNMS test devices
| |||||||||||||
| CswPowerStatus | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.6 | INTEGER | RO | externalPower(4) | |||||||||
column · INTEGER · read-only · current Indicates the switch using internalPower(1), redundantPower(2), internalAndRedundantPower(3) or externalPower(4)
Example values from LibreNMS test devices
| |||||||||||||
| CswRoleInSystem | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.7 | INTEGER | RO | master(1) | |||||||||
column · INTEGER · read-only · current Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.
Example values from LibreNMS test devices
| |||||||||||||
| CswSerialNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.8 | DisplayString (SIZE (0..80)) | RO | 5082094 | |||||||||
column · DisplayString (SIZE (0..80)) · read-only · current Serial number of the switch. Example values from LibreNMS test devices
| |||||||||||||
| CswProdName | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.9 | DisplayString (SIZE (0..127)) | RO | ETH24GX+4XS+MPLS | |||||||||
column · DisplayString (SIZE (0..127)) · read-only · current Example values from LibreNMS test devices
| |||||||||||||
| CswProdModelId | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.10 | INTEGER | RO | eth24gx4xs(71) | |||||||||
column · INTEGER · read-only · current Product model identifier.
Example values from LibreNMS test devices
| |||||||||||||
| CswFirmwareReleaseDate | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.11 | DisplayString (SIZE (0..32)) | RO | Thu Jun 4 05:44:50 UTC 2020 | |||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Release date of the firmware. Example values from LibreNMS test devices
| |||||||||||||
| CswTemperature | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.12 | INTEGER | RO | 35 | |||||||||
column · INTEGER · read-only · current Temperature of the switch. Example values from LibreNMS test devices
| |||||||||||||
| CswG704IntfNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.13 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of G704 interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| CswE1cIntfNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.14 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of E1c interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| CswBundleIntfNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.15 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of Bundle interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| CswPtpIntfNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.16 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of PTP interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| CswSdhIntfNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.17 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of SDH interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| CswVC4Number | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.18 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of VC4 interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| CswVC12Number | 1.3.6.1.4.1.3709.3.5.201.1.1.2.1.19 | Integer32 | RO | 0 | |||||||||
column · Integer32 · read-only · current The number of VC12 interfaces of this switch. Example values from LibreNMS test devices
| |||||||||||||
| NswitchProductId | 1.3.6.1.4.1.3709.3.5.201.1.1.3 | ||||||||||||
| SswProdManufacturer | 1.3.6.1.4.1.3709.3.5.201.1.1.3.2 | DisplayString (SIZE (0..127)) | RO | ||||||||||
| SswProdDescription | 1.3.6.1.4.1.3709.3.5.201.1.1.3.3 | DisplayString (SIZE (0..127)) | RO | ||||||||||
| SswProdUrl | 1.3.6.1.4.1.3709.3.5.201.1.1.3.5 | DisplayString (SIZE (0..127)) | RO | ||||||||||
| SswIdentifier | 1.3.6.1.4.1.3709.3.5.201.1.1.3.6 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current A unique identifier of which switch in the chassis is currently being looked at. | |||||||||||||
| SswVendorId | 1.3.6.1.4.1.3709.3.5.201.1.1.3.7 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Vendor information. The value 0 indicates a vendor not defined.
| |||||||||||||
| TswitchIndivPowerTable | 1.3.6.1.4.1.3709.3.5.201.1.1.4 | NA | |||||||||||
table · not-accessible · current Table about status of individual powers. | |||||||||||||
| RswitchIndivPowerEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.4.1 | NA | |||||||||||
row · not-accessible · current Table about status of individual powers. | |||||||||||||
| CswIndivPowerUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This is defined as swUnitIndex. | |||||||||||||
| CswIndivPowerIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.2 | INTEGER (1..2) | RO | ||||||||||
column · INTEGER (1..2) · read-only · current 1 means internal power. 2 means external power. | |||||||||||||
| CswIndivPowerStatus | 1.3.6.1.4.1.3709.3.5.201.1.1.4.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current notPresent(3) means not present. green(2) means up. red(1) means down.
| |||||||||||||
| TswitchIndivFanTable | 1.3.6.1.4.1.3709.3.5.201.1.1.5 | NA | |||||||||||
table · not-accessible · current Table about status of individual fans. | |||||||||||||
| RswitchIndivFanEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.5.1 | NA | |||||||||||
row · not-accessible · current Table about status of individual fans. | |||||||||||||
| CswIndivFanUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This is defined as swUnitIndex. | |||||||||||||
| CswIndivFanIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.2 | INTEGER (1..2) | RO | ||||||||||
| CswIndivFanStatus | 1.3.6.1.4.1.3709.3.5.201.1.1.5.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current red(1) means down. green(2) means up.
| |||||||||||||
| TswitchIndivAlarmTable | 1.3.6.1.4.1.3709.3.5.201.1.1.6 | NA | |||||||||||
table · not-accessible · current Table about status of individual alarms. | |||||||||||||
| RswitchIndivAlarmEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.6.1 | NA | |||||||||||
row · not-accessible · current Table about status of individual alarms. | |||||||||||||
| CswIndivAlarmUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This is defined as swUnitIndex. | |||||||||||||
| CswIndivAlarmIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.2 | INTEGER (1..3) | RO | ||||||||||
| CswIndivAlarmStatus | 1.3.6.1.4.1.3709.3.5.201.1.1.6.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current
| |||||||||||||
| SswitchResObj | 1.3.6.1.4.1.3709.3.5.201.1.1.7 | Integer32 | RW | ||||||||||
| SswHashConfig | 1.3.6.1.4.1.3709.3.5.201.1.1.8 | DisplayString (SIZE (16)) | RO | ||||||||||
| SswHashStatus | 1.3.6.1.4.1.3709.3.5.201.1.1.9 | DisplayString (SIZE (16)) | RO | ||||||||||
| SswCpuUsage | 1.3.6.1.4.1.3709.3.5.201.1.1.10 | Integer32 | RO | 8459 | |||||||||
scalar · Integer32 · read-only · current The CPU usage (in hundredths of a percent) at the last minute. Example values from LibreNMS test devices
| |||||||||||||
| SswMemUsage | 1.3.6.1.4.1.3709.3.5.201.1.1.11 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The memory usage (percentage). | |||||||||||||
| TswitchMacAddrUsageTable | 1.3.6.1.4.1.3709.3.5.201.1.1.12 | NA | |||||||||||
table · not-accessible · current Table about the total of used MAC addresses entries. | |||||||||||||
| RswitchMacAddrUsageEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.12.1 | NA | |||||||||||
row · not-accessible · current Table about the total of used MAC addresses entries.
| |||||||||||||
| CswMacAddrUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.12.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as swUnitIndex. | |||||||||||||
| CswMacAddrUsageValue | 1.3.6.1.4.1.3709.3.5.201.1.1.12.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The total of used MAC addresses entries. | |||||||||||||
| SswSlotNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.13 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The total number of interface board slots present on the device. | |||||||||||||
| TswitchMpuTable | 1.3.6.1.4.1.3709.3.5.201.1.1.14 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about MPUs in this system. | |||||||||||||
| RswitchMpuEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.14.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about a single MPU in this system.
| |||||||||||||
| CswMpuIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This object identifies the MPU within the system for which this entry contains information. | |||||||||||||
| CswMpuBootLoaderVer | 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.2 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Loader version of the main board. | |||||||||||||
| CswMpuRoleInSystem | 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the MPU is active(1) or standby(2) in this system.
| |||||||||||||
| CswMpuSerialNumber | 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.4 | DisplayString (SIZE (0..80)) | RO | ||||||||||
column · DisplayString (SIZE (0..80)) · read-only · current Serial number of the MPU. | |||||||||||||
| CswMpuModelId | 1.3.6.1.4.1.3709.3.5.201.1.1.14.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current MPU model identifier.
| |||||||||||||
| SswHashHardware | 1.3.6.1.4.1.3709.3.5.201.1.1.15 | DisplayString (SIZE (16)) | RO | ||||||||||
| TswitchIndivAlarmOutTable | 1.3.6.1.4.1.3709.3.5.201.1.1.16 | NA | |||||||||||
table · not-accessible · current Table about status of output alarms. | |||||||||||||
| RswitchIndivAlarmOutEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.16.1 | NA | |||||||||||
| CswIndivAlarmOutUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.16.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current This is defined as swUnitIndex. | |||||||||||||
| CswIndivAlarmOutStatus | 1.3.6.1.4.1.3709.3.5.201.1.1.16.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates current alarm output status, as configured in external-alarm-output.
| |||||||||||||
| SswChassisModel | 1.3.6.1.4.1.3709.3.5.201.1.1.17 | INTEGER | RO | dmSwitch4100(9) | |||||||||
scalar · INTEGER · read-only · current Chassis model for equipment
Example values from LibreNMS test devices
| |||||||||||||
| TswitchSessionTable | 1.3.6.1.4.1.3709.3.5.201.1.1.18 | NA | |||||||||||
table · not-accessible · current Table about CLI sessions informations. | |||||||||||||
| RswitchSessionEntry | 1.3.6.1.4.1.3709.3.5.201.1.1.18.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about a single switch in this system.
| |||||||||||||
| CswSessionUnitIndex | 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as swUnitIndex. | |||||||||||||
| CswSessionName | 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.2 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Session username. | |||||||||||||
| CswSessionUptime | 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.3 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current Login time and date (uptime). | |||||||||||||
| CswSessionPid | 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current CLI Session Process ID. | |||||||||||||
| CswSessionSrcIP | 1.3.6.1.4.1.3709.3.5.201.1.1.18.1.5 | DisplayString (SIZE (0..20)) | RO | ||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current IP from process that called CLI - telnet, ssh or inetd. | |||||||||||||
| NportMgt | 1.3.6.1.4.1.3709.3.5.201.1.2 | ||||||||||||
| TportTable | 1.3.6.1.4.1.3709.3.5.201.1.2.1 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains information about each trunk (similar to Cisco's EtherChannel). | |||||||||||||
| RportEntry | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about configuration in one switch port of the switch.
| |||||||||||||
| CportIndex | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as ifIndex in the IF-MIB. | |||||||||||||
| CportName | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.2 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later). | |||||||||||||
| CportType | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Indicates the port type.
| |||||||||||||
| CportSpeedDpxCfg | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
fullDuplex10000(8) - 10000Mbps and full duplex mode
hundredBaseTX port can be set as
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as
halfDuplex100(4)
fullDuplex100(5)
thousandBaseSX port can be set as
halfDuplex1000(6)
fullDuplex1000(7)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.
| |||||||||||||
| CportFlowCtrlCfg | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current (1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(3) Flow control mechanism is backPressure.
when the port is in fullDuplex mode.This flow control
mechanism will not function.
(4) Flow control mechanism is IEEE 802.3x flow control.
when the port is in halfDuplex mode.This flow control
mechanism will not function.
hundredBaseTX and thousandBaseSX port can be set as:
enabled(1),
disabled(2),
backPressure(3),
dot3xFlowControl(4).
hundredBaseFX port can be set as:
enabled(1),
disabled(2),
backPressure(3).
The actual flow control mechanism is used given by
portFlowCtrlStatus.
| |||||||||||||
| CportCapabilities | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.6 | Bits | RW | ||||||||||
column · Bits · read-write · current Port capabilities.
| |||||||||||||
| CportAutonegotiation | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether autonegotiation is enabled.
| |||||||||||||
| CportSpeedDpxStatus | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
| |||||||||||||
| CportFlowCtrlStatus | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trunk and the result is inconsistent among its member ports, this value is error(1).
| |||||||||||||
| CportMdiStatus | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current
| |||||||||||||
| CportTrunkIndex | 1.3.6.1.4.1.3709.3.5.201.1.2.1.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPorts. | |||||||||||||
| NtrunkMgt | 1.3.6.1.4.1.3709.3.5.201.1.3 | ||||||||||||
| StrunkMaxId | 1.3.6.1.4.1.3709.3.5.201.1.3.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The maximum number for a trunk identifier. | |||||||||||||
| StrunkValidNumber | 1.3.6.1.4.1.3709.3.5.201.1.3.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The number of valid trunks. | |||||||||||||
| TtrunkTable | 1.3.6.1.4.1.3709.3.5.201.1.3.3 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about configuration of each trunk, similar to Cisco EtherChannel. | |||||||||||||
| RtrunkEntry | 1.3.6.1.4.1.3709.3.5.201.1.3.3.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about configuration in one trunk of the switch.
| |||||||||||||
| CtrunkIndex | 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the trunk within the switch for which this entry contains information. | |||||||||||||
| CtrunkPorts | 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.2 | PortList | RC | ||||||||||
column · PortList · read-create · current The complete set of ports currently associated with this trunk. | |||||||||||||
| CtrunkCreation | 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.
| |||||||||||||
| CtrunkStatus | 1.3.6.1.4.1.3709.3.5.201.1.3.3.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.
| |||||||||||||
| NlacpMgt | 1.3.6.1.4.1.3709.3.5.201.1.4 | ||||||||||||
| TlacpPortTable | 1.3.6.1.4.1.3709.3.5.201.1.4.1 | NA | |||||||||||
table · not-accessible · current Table for LACP port configuration. | |||||||||||||
| RlacpPortEntry | 1.3.6.1.4.1.3709.3.5.201.1.4.1.1 | NA | |||||||||||
| ClacpPortIndex | 1.3.6.1.4.1.3709.3.5.201.1.4.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as ifIndex in the IF-MIB. | |||||||||||||
| ClacpPortStatus | 1.3.6.1.4.1.3709.3.5.201.1.4.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether 802.3ad LACP is enabled.
| |||||||||||||
| NstaMgt | 1.3.6.1.4.1.3709.3.5.201.1.5 | ||||||||||||
| SstaSystemStatus | 1.3.6.1.4.1.3709.3.5.201.1.5.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | |||||||||||||
| TstaPortTable | 1.3.6.1.4.1.3709.3.5.201.1.5.2 | NA | |||||||||||
table · not-accessible · current The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. | |||||||||||||
| RstaPortEntry | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1 | NA | |||||||||||
| CstaPortIndex | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (excluding trunk member ports) interface of the staPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1dStpPort in the BRIDGE-MIB. | |||||||||||||
| CstaPortAdminEdgePort | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.2 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current The administrative value of the edge port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indicates that this port should be assumed as a non-edge-port. | |||||||||||||
| CstaPortOperEdgePort | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.3 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. | |||||||||||||
| CstaPortAdminPointToPoint | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
| |||||||||||||
| CstaPortOperPointToPoint | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the staPortAdminPointToPoint object. | |||||||||||||
| CstaPortLongPathCost | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.6 | Integer32 (1..200000000) | RW | ||||||||||
column · Integer32 (1..200000000) · read-write · current The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in the 32-bit value range when the staPathCostMethod is long(2). If the staPathCostMethod is short(1), this mib object is not instantiated. | |||||||||||||
| CstaPortSystemStatus | 1.3.6.1.4.1.3709.3.5.201.1.5.2.1.7 | EnabledStatus | RW | ||||||||||
column · EnabledStatus · read-write · current Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. | |||||||||||||
| SstaProtocolType | 1.3.6.1.4.1.3709.3.5.201.1.5.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that the Rapid Spanning Tree Protocol is as specified in IEEE 802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning Tree Protocol is as specified in IEEE 802.1s. New values may be defined in the future as new or updated versions of the protocol become available.
| |||||||||||||
| NtftpMgt | 1.3.6.1.4.1.3709.3.5.201.1.6 | ||||||||||||
| StftpFile | 1.3.6.1.4.1.3709.3.5.201.1.6.1 | DisplayString (SIZE (0..127)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..127)) · read-write · current The file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been specified. | |||||||||||||
| StftpFlashConfig | 1.3.6.1.4.1.3709.3.5.201.1.6.2 | INTEGER (1..4) | RW | ||||||||||
scalar · INTEGER (1..4) · read-write · current Number of flash config partition for to be used when the chosen action is the downloadToFlashConfig or the uploadFromFlashConfig. This values is set to the zero when no flash config has been specified. | |||||||||||||
| StftpServer | 1.3.6.1.4.1.3709.3.5.201.1.6.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the TFTP server for transfer when a download or upload is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified. | |||||||||||||
| StftpAction | 1.3.6.1.4.1.3709.3.5.201.1.6.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When this object is set to downloadToFlashConfig(1),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
flash-config(specified by tftpFlashConfig) in the device
using the TFTP protocol.
When this object is set to downloadToRunningConfig(2),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
running-config in the device using the TFTP protocol.
When this object is set to downloadToStartupConfig(3),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
Startup-config in the device using the TFTP protocol.
When this object is set to downloadToFirmware(4),
the device will begin download of the file specified
by tftpFile from the server specified by tftpServer to
firmware in the device using the TFTP protocol.
When this object is set to uploadFromFlashConfig(5),
the device will begin upload of the
flash-config(specified by tftpFlashConfig) in the device
to tftpFile in the server specified by tftpServer.
When this object is set to uploadFromRunningConfig(6),
the device will begin upload of the running-config in
the device to tftpFile in the server specified by tftpServer.
When this object is set to uploadFromStartupConfig(7),
the device will begin upload of the startup-config in
the device to tftpFile in the server specified by
tftpServer.
When the device is not downloading, this object will have
a value of notDownloading(8).
| |||||||||||||
| NrestartMgt | 1.3.6.1.4.1.3709.3.5.201.1.7 | ||||||||||||
| SrestartFirmware | 1.3.6.1.4.1.3709.3.5.201.1.7.1 | INTEGER (1..2) | RW | ||||||||||
scalar · INTEGER (1..2) · read-write · current Number of firmware flash index for start-up. | |||||||||||||
| SrestartConfig | 1.3.6.1.4.1.3709.3.5.201.1.7.2 | INTEGER (1..4) | RW | ||||||||||
scalar · INTEGER (1..4) · read-write · current Number of configuration flash index for start-up. | |||||||||||||
| SrestartControl | 1.3.6.1.4.1.3709.3.5.201.1.7.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
| |||||||||||||
| NmirrorMgt | 1.3.6.1.4.1.3709.3.5.201.1.8 | ||||||||||||
| SmirrorDestinationPort | 1.3.6.1.4.1.3709.3.5.201.1.8.1 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB. | |||||||||||||
| TmirrorTable | 1.3.6.1.4.1.3709.3.5.201.1.8.2 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about switches in this system. | |||||||||||||
| RmirrorEntry | 1.3.6.1.4.1.3709.3.5.201.1.8.2.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about a single switch in this system.
| |||||||||||||
| CmirrorSourcePort | 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current Source port for mirrored packets. This is defined as ifIndex in the IF-MIB. | |||||||||||||
| CmirrorType | 1.3.6.1.4.1.3709.3.5.201.1.8.2.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is all(3),
all packts will be mirrored
| |||||||||||||
| NigmpSnoopMgt | 1.3.6.1.4.1.3709.3.5.201.1.9 | ||||||||||||
| SigmpSnoopStatus | 1.3.6.1.4.1.3709.3.5.201.1.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports.
| |||||||||||||
| SigmpSnoopQuerier | 1.3.6.1.4.1.3709.3.5.201.1.9.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Whether to act as querier.
| |||||||||||||
| SigmpSnoopQueryCount | 1.3.6.1.4.1.3709.3.5.201.1.9.3 | INTEGER (2..10) | RW | ||||||||||
scalar · INTEGER (2..10) · read-write · current Maximum number of queries that have not been heard on the system before the system starts taking action to solicit reports. | |||||||||||||
| SigmpSnoopQueryInterval | 1.3.6.1.4.1.3709.3.5.201.1.9.4 | INTEGER (60..125) | RW | ||||||||||
scalar · INTEGER (60..125) · read-write · current Query interval. | |||||||||||||
| SigmpSnoopQueryMaxResponseTime | 1.3.6.1.4.1.3709.3.5.201.1.9.5 | INTEGER (5..25) | RW | ||||||||||
scalar · INTEGER (5..25) · read-write · current Timeout value (seconds) between IGMP reports received on a port for an IP Multicast Address that can pass before the system sends an IGMP Query out the port and removes it from the list. | |||||||||||||
| SigmpSnoopQueryTimeout | 1.3.6.1.4.1.3709.3.5.201.1.9.6 | INTEGER (300..500) | RW | ||||||||||
scalar · INTEGER (300..500) · read-write · current Query time-out. | |||||||||||||
| SigmpSnoopVersion | 1.3.6.1.4.1.3709.3.5.201.1.9.7 | INTEGER (1..2) | RW | ||||||||||
scalar · INTEGER (1..2) · read-write · current Version. | |||||||||||||
| TigmpSnoopRouterCurrentTable | 1.3.6.1.4.1.3709.3.5.201.1.9.8 | NA | |||||||||||
table · not-accessible · current Table for current router ports. | |||||||||||||
| RigmpSnoopRouterCurrentEntry | 1.3.6.1.4.1.3709.3.5.201.1.9.8.1 | NA | |||||||||||
| CigmpSnoopRouterCurrentVlanIndex | 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. | |||||||||||||
| CigmpSnoopRouterCurrentPorts | 1.3.6.1.4.1.3709.3.5.201.1.9.8.1.2 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are current router ports. Within this list, some router ports are static router ports. Please refer to igmpSnoopRouterStaticTable. | |||||||||||||
| TigmpSnoopRouterStaticTable | 1.3.6.1.4.1.3709.3.5.201.1.9.9 | NA | |||||||||||
table · not-accessible · current Table for static router ports. | |||||||||||||
| RigmpSnoopRouterStaticEntry | 1.3.6.1.4.1.3709.3.5.201.1.9.9.1 | NA | |||||||||||
| CigmpSnoopRouterStaticVlanIndex | 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. | |||||||||||||
| CigmpSnoopRouterStaticPorts | 1.3.6.1.4.1.3709.3.5.201.1.9.9.1.2 | PortList | RC | ||||||||||
column · PortList · read-create · current The set of ports which are static router ports. | |||||||||||||
| TigmpSnoopMulticastCurrentTable | 1.3.6.1.4.1.3709.3.5.201.1.9.10 | NA | |||||||||||
table · not-accessible · current Table for current multicast addresses. | |||||||||||||
| RigmpSnoopMulticastCurrentEntry | 1.3.6.1.4.1.3709.3.5.201.1.9.10.1 | NA | |||||||||||
row · not-accessible · current Entry for current multicast addresses. | |||||||||||||
| CigmpSnoopMulticastCurrentVlanIndex | 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. | |||||||||||||
| CigmpSnoopMulticastCurrentIpAddress | 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current IP address of multicast group. | |||||||||||||
| CigmpSnoopMulticastCurrentPorts | 1.3.6.1.4.1.3709.3.5.201.1.9.10.1.3 | PortList | RO | ||||||||||
column · PortList · read-only · current The set of ports which are members. | |||||||||||||
| TigmpSnoopMulticastStaticTable | 1.3.6.1.4.1.3709.3.5.201.1.9.11 | NA | |||||||||||
table · not-accessible · current Table for static multicast addresses. | |||||||||||||
| RigmpSnoopMulticastStaticEntry | 1.3.6.1.4.1.3709.3.5.201.1.9.11.1 | NA | |||||||||||
row · not-accessible · current Entry for static multicast addresses. | |||||||||||||
| CigmpSnoopMulticastStaticVlanIndex | 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. | |||||||||||||
| CigmpSnoopMulticastStaticIpAddress | 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current IP address of multicast group. | |||||||||||||
| CigmpSnoopMulticastStaticPorts | 1.3.6.1.4.1.3709.3.5.201.1.9.11.1.3 | PortList | RC | ||||||||||
column · PortList · read-create · current The set of ports which are static members. | |||||||||||||
| NipMgt | 1.3.6.1.4.1.3709.3.5.201.1.10 | ||||||||||||
| SipAddressMode | 1.3.6.1.4.1.3709.3.5.201.1.10.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||
| SipDefaultGateway | 1.3.6.1.4.1.3709.3.5.201.1.10.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. | |||||||||||||
| SipPrimaryDnsServer | 1.3.6.1.4.1.3709.3.5.201.1.10.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Address of the primary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0. | |||||||||||||
| SipSecondaryDnsServer | 1.3.6.1.4.1.3709.3.5.201.1.10.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP Address of the secondary DNS server. If this value is undefined or unknown, it shall have the value 0.0.0.0. | |||||||||||||
| SipHttpState | 1.3.6.1.4.1.3709.3.5.201.1.10.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Whether HTTP is enabled.
| |||||||||||||
| SipHttpPort | 1.3.6.1.4.1.3709.3.5.201.1.10.6 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current The port number for HTTP. | |||||||||||||
| SipHttpsState | 1.3.6.1.4.1.3709.3.5.201.1.10.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Whether HTTPS is enabled.
| |||||||||||||
| SipHttpsPort | 1.3.6.1.4.1.3709.3.5.201.1.10.8 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current The port number for HTTPS. | |||||||||||||
| SipTelnetState | 1.3.6.1.4.1.3709.3.5.201.1.10.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Whether telnet is enabled.
| |||||||||||||
| NbcastStormMgt | 1.3.6.1.4.1.3709.3.5.201.1.11 | ||||||||||||
| TbcastStormTable | 1.3.6.1.4.1.3709.3.5.201.1.11.1 | NA | |||||||||||
table · not-accessible · current Table of descriptive and status information about
configuration of each switch ports(including expansion slot)
in this system. | |||||||||||||
| RbcastStormEntry | 1.3.6.1.4.1.3709.3.5.201.1.11.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about configuration in one switch port of the switch.
| |||||||||||||
| CbcastStormIfIndex | 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as ifIndex in the IF-MIB. | |||||||||||||
| CbcastStormStatus | 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether broadcast storm protection is enabled.
| |||||||||||||
| CbcastStormPacketRate | 1.3.6.1.4.1.3709.3.5.201.1.11.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Broadcast storm threshold as packets per second. | |||||||||||||
| NvlanMgt | 1.3.6.1.4.1.3709.3.5.201.1.12 | ||||||||||||
| TvlanTable | 1.3.6.1.4.1.3709.3.5.201.1.12.1 | NA | |||||||||||
table · not-accessible · current Table for VLAN configuration. | |||||||||||||
| RvlanEntry | 1.3.6.1.4.1.3709.3.5.201.1.12.1.1 | NA | |||||||||||
| CvlanIndex | 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. | |||||||||||||
| CvlanAddressMethod | 1.3.6.1.4.1.3709.3.5.201.1.12.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Method to get the IP address.
| |||||||||||||
| NpriorityMgt | 1.3.6.1.4.1.3709.3.5.201.1.13 | ||||||||||||
| TprioWrrTable | 1.3.6.1.4.1.3709.3.5.201.1.13.1 | NA | |||||||||||
table · not-accessible · current Table for weighted round robin (WRR). | |||||||||||||
| RprioWrrEntry | 1.3.6.1.4.1.3709.3.5.201.1.13.1.1 | NA | |||||||||||
| CprioWrrTrafficClass | 1.3.6.1.4.1.3709.3.5.201.1.13.1.1.1 | INTEGER (0..7) | NA | ||||||||||
column · INTEGER (0..7) · not-accessible · current Traffic class for this entry, as defined in dot1dTrafficClass in the Q-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1. | |||||||||||||
| CprioWrrWeight | 1.3.6.1.4.1.3709.3.5.201.1.13.1.1.2 | INTEGER (1..31) | RW | ||||||||||
column · INTEGER (1..31) · read-write · current Weight for this entry. | |||||||||||||
| SprioQueueMode | 1.3.6.1.4.1.3709.3.5.201.1.13.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The global status for the prioQueue. wrr(1),strict(2)
| |||||||||||||
| NtrapDestMgt | 1.3.6.1.4.1.3709.3.5.201.1.14 | ||||||||||||
| TtrapDestTable | 1.3.6.1.4.1.3709.3.5.201.1.14.1 | NA | |||||||||||
table · not-accessible · current A list of trap destination entries. | |||||||||||||
| RtrapDestEntry | 1.3.6.1.4.1.3709.3.5.201.1.14.1.1 | NA | |||||||||||
row · not-accessible · current This entry includes a destination IP address to which to send traps for this community.
| |||||||||||||
| CtrapDestAddress | 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The address to send traps. | |||||||||||||
| CtrapDestCommunity | 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.2 | OCTET STRING (SIZE (0..31)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..31)) · read-create · current A community to which this destination address belongs. | |||||||||||||
| CtrapDestStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.
| |||||||||||||
| CtrapDestVersion | 1.3.6.1.4.1.3709.3.5.201.1.14.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This variables represent the version of the Trap we wish to send to trap Receiver, if the value is 1, mean we wish to send Version 1 trap, if the value is 2, mean we wish to send version 2 trap.
| |||||||||||||
| NtrapVar | 1.3.6.1.4.1.3709.3.5.201.1.14.2 | ||||||||||||
| StrapForbiddenAccessMode | 1.3.6.1.4.1.3709.3.5.201.1.14.2.1 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3),
ssh(4).
| |||||||||||||
| StrapForbiddenAccessIp | 1.3.6.1.4.1.3709.3.5.201.1.14.2.2 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. | |||||||||||||
| StrapLoginUserName | 1.3.6.1.4.1.3709.3.5.201.1.14.2.3 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current This variable is for trap var binding, indicating the name used by user to logging. | |||||||||||||
| StrapConfigSavePartition | 1.3.6.1.4.1.3709.3.5.201.1.14.2.4 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the partition witch the config was saved. | |||||||||||||
| StrapSfpPresenceStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.5 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the presence status of a sfp connector.
| |||||||||||||
| StrapInfAlarmVal | 1.3.6.1.4.1.3709.3.5.201.1.14.2.6 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the alarm value. deactivated(1), actived(2), unstable(3).
| |||||||||||||
| StrapDuplicatedIpVlan | 1.3.6.1.4.1.3709.3.5.201.1.14.2.7 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the vlan witch the duplicated ip was detected. | |||||||||||||
| StrapDuplicatedIpAddress | 1.3.6.1.4.1.3709.3.5.201.1.14.2.8 | Integer32 | AN | ||||||||||
scalar · Integer32 · accessible-for-notify · current This variable is for trap var binding, indicating the duplicated ip address. | |||||||||||||
| StrapDuplicatedIpMacAddress | 1.3.6.1.4.1.3709.3.5.201.1.14.2.9 | MacAddress | AN | ||||||||||
scalar · MacAddress · accessible-for-notify · current This variable is for trap var binding, indicating the mac address of the device that has the duplicated ip. | |||||||||||||
| StrapEapsDomainName | 1.3.6.1.4.1.3709.3.5.201.1.14.2.10 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current This variable is for trap var binding, indicating the eaps domain name. | |||||||||||||
| StrapEapsDomainId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.11 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the eaps domain identifier. | |||||||||||||
| StrapEapsStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.12 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding,
indicating the eaps status.
idle(0),
complete(1),
failed(2),
links-up(3),
links-down(4),
pre-forwarding(5).
| |||||||||||||
| StrapTemperature | 1.3.6.1.4.1.3709.3.5.201.1.14.2.13 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the temperature in degrees Celsius. | |||||||||||||
| StrapFuseId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.14 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the fuse indentifier. | |||||||||||||
| StrapFuseStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.15 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the fuse status. normal(1), failed(2).
| |||||||||||||
| StrapFansBoardPresenceStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.16 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the presence status of the fans board.
| |||||||||||||
| StrapStandbyMpuPresenceStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.17 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the presence status of the standby MPU.
| |||||||||||||
| StrapMacAddressMove | 1.3.6.1.4.1.3709.3.5.201.1.14.2.18 | MacAddress | AN | ||||||||||
scalar · MacAddress · accessible-for-notify · current This variable is for trap var binding, indicating the MAC address of the device that has moved. | |||||||||||||
| StrapMemFree | 1.3.6.1.4.1.3709.3.5.201.1.14.2.19 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the total memory free(in Kbytes). | |||||||||||||
| StrapBootloaderNew | 1.3.6.1.4.1.3709.3.5.201.1.14.2.20 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current This variable is for trap var binding, indicating the installed bootloader version. | |||||||||||||
| StrapDevNo | 1.3.6.1.4.1.3709.3.5.201.1.14.2.21 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the Dev no of equipment. | |||||||||||||
| StrapDevLocalId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.22 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the Serial number of remote equipment. | |||||||||||||
| StrapCesopTdmStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.23 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of TDM interface.
| |||||||||||||
| StrapCesopTdmRemoteStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.24 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of remote TDM interface.
| |||||||||||||
| StrapCesopTdmCasStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.25 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of CAS TDM interface.
| |||||||||||||
| StrapCesopTdmCrcStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.26 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of CRC TDM interface.
| |||||||||||||
| StrapCesopBundleLocalTdmStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.27 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of Local TDM in bundle interface.
| |||||||||||||
| StrapCesopBundleRemoteTdmStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.28 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of Remote TDM in bundle interface.
| |||||||||||||
| StrapCesopBundleLocalStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.29 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of Local bundle interface.
| |||||||||||||
| StrapCesopBundleRemoteStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.30 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of Remote bundle interface.
| |||||||||||||
| StrapCesopBundlePktMismatchStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.31 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of packet mismatch in bundle interface.
| |||||||||||||
| StrapCesopBundleNextHopStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.32 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of Next Hop in bundle interface.
| |||||||||||||
| StrapCesopClockAdapLinkQuality | 1.3.6.1.4.1.3709.3.5.201.1.14.2.33 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the Adaptative link quality of clock interface. | |||||||||||||
| StrapCesopClockSourceStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.34 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of Clock Source interface.
| |||||||||||||
| StrapBroadcastStormControlStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.35 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding,
indicating the status of broadcsat storm control at this
interface.
| |||||||||||||
| StrapBroadcastStormControlPPS | 1.3.6.1.4.1.3709.3.5.201.1.14.2.36 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the current average count of broadcast packets per second at this interface. | |||||||||||||
| StrapMulticastStormControlStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.37 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding,
indicating the status of multicsat storm control at this
interface.
| |||||||||||||
| StrapMulticastStormControlPPS | 1.3.6.1.4.1.3709.3.5.201.1.14.2.38 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the current average count of multicast packets per second at this interface. | |||||||||||||
| StrapStatusLDP | 1.3.6.1.4.1.3709.3.5.201.1.14.2.39 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of condition the protocol LDP.
| |||||||||||||
| StrapIdLDP | 1.3.6.1.4.1.3709.3.5.201.1.14.2.40 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the entity identification the protocol LDP. | |||||||||||||
| StrapStatusTunnelRSVP | 1.3.6.1.4.1.3709.3.5.201.1.14.2.41 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of condition tunnel on protocol RSVP.
| |||||||||||||
| StrapIdTunnelRSVP | 1.3.6.1.4.1.3709.3.5.201.1.14.2.42 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the entity identification the tunnel on protocol RSVP. | |||||||||||||
| StrapPanelStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.43 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the panel status. closed(1), open(2)
| |||||||||||||
| StrapLSTGroup | 1.3.6.1.4.1.3709.3.5.201.1.14.2.44 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the Link-state Tracking Group. | |||||||||||||
| StrapMemL3Free | 1.3.6.1.4.1.3709.3.5.201.1.14.2.45 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the total L3 memory free(in Kbytes). | |||||||||||||
| StrapActiveMpuNsfId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.46 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the active mpu nsf-id. | |||||||||||||
| StrapStandByMpuNsfId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.47 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the standby mpu nsf-id. | |||||||||||||
| StrapErpsDomainName | 1.3.6.1.4.1.3709.3.5.201.1.14.2.48 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current This variable is for trap var binding, indicating the erps domain name. | |||||||||||||
| StrapErpsDomainId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.49 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the erps domain identifier. | |||||||||||||
| StrapErpsStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.50 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding,
indicating the erps status.
init(1),
idle(2),
protection(3).
| |||||||||||||
| StrapCfmMdName | 1.3.6.1.4.1.3709.3.5.201.1.14.2.51 | DisplayString (SIZE (1..42)) | AN | ||||||||||
scalar · DisplayString (SIZE (1..42)) · accessible-for-notify · current This variable is for trap var binding, indicating the Maintenance Domain (MD) name that originated the trap. | |||||||||||||
| StrapCfmMaName | 1.3.6.1.4.1.3709.3.5.201.1.14.2.52 | DisplayString (SIZE (1..44)) | AN | ||||||||||
scalar · DisplayString (SIZE (1..44)) · accessible-for-notify · current This variable is for trap var binding, indicating the Maintenance Association (MA) name that originated the trap. | |||||||||||||
| StrapCfmMepId | 1.3.6.1.4.1.3709.3.5.201.1.14.2.53 | INTEGER (1..8192) | AN | ||||||||||
scalar · INTEGER (1..8192) · accessible-for-notify · current This variable is for trap var binding, indicating the Maintenance End Point ID (MEPID) that originated the trap. | |||||||||||||
| StrapCfmVlan | 1.3.6.1.4.1.3709.3.5.201.1.14.2.54 | INTEGER (1..4094) | AN | ||||||||||
scalar · INTEGER (1..4094) · accessible-for-notify · current This variable is for trap var binding, indicating the VLAN that originated the trap. | |||||||||||||
| StrapCfmDefect | 1.3.6.1.4.1.3709.3.5.201.1.14.2.55 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the defect condition being notified . defNone(0), defRDICCM(1), defMACstatus(2), defRemoteCCM(3), defErrorCCM(4), defXconCCM(5).
| |||||||||||||
| StrapEvcName | 1.3.6.1.4.1.3709.3.5.201.1.14.2.56 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current This variable is for trap var binding, indicating the EVC name. | |||||||||||||
| StrapEvcStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.57 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of EVC being notified, notActive(0), newAndNotActive(1), active(2), newAndActive(3), partiallyActive(4), newAndPartiallyActive(5).
| |||||||||||||
| StrapSyncSystemClockStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.58 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of system clock
| |||||||||||||
| StrapCesopG704ClockSourceStatus | 1.3.6.1.4.1.3709.3.5.201.1.14.2.59 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the status of g704 clock source.
| |||||||||||||
| StrapSystemWarningsUnits | 1.3.6.1.4.1.3709.3.5.201.1.14.2.60 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable is for trap var binding, indicating the system warnings units.
| |||||||||||||
| StrapSensorGroup | 1.3.6.1.4.1.3709.3.5.201.1.14.2.61 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current This variable indicates the sensor's type informed in notification.
| |||||||||||||
| NrateLimitMgt | 1.3.6.1.4.1.3709.3.5.201.1.16 | ||||||||||||
| TrateLimitPortTable | 1.3.6.1.4.1.3709.3.5.201.1.16.1 | NA | |||||||||||
table · not-accessible · current Table for rate limit of each port. | |||||||||||||
| RrateLimitPortEntry | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1 | NA | |||||||||||
| CrlPortIndex | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB. | |||||||||||||
| CrlPortInputStatus | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether input rate limit is enabled for this port.
| |||||||||||||
| CrlPortOutputStatus | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Whether output rate limit is enabled for this port.
| |||||||||||||
| CrlPortInputRate | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.4 | Integer32 (64..1000000) | RW | ||||||||||
column · Integer32 (64..1000000) · read-write · current Rate-limit in kilobits per second. Must be multiple of 64. | |||||||||||||
| CrlPortInputBurst | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.5 | Integer32 (32..4096) | RW | ||||||||||
column · Integer32 (32..4096) · read-write · current Maximum burst size in kilobits. Must be power of 2. | |||||||||||||
| CrlPortOutputRate | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.6 | Integer32 (64..1000000) | RW | ||||||||||
column · Integer32 (64..1000000) · read-write · current Rate-limit in kilobits per second. Must be multiple of 64. | |||||||||||||
| CrlPortOutputBurst | 1.3.6.1.4.1.3709.3.5.201.1.16.1.1.7 | Integer32 (32..4096) | RW | ||||||||||
column · Integer32 (32..4096) · read-write · current Maximum burst size in kilobits. Must be power of 2. | |||||||||||||
| NsecurityMgt | 1.3.6.1.4.1.3709.3.5.201.1.17 | ||||||||||||
| NradiusMgt | 1.3.6.1.4.1.3709.3.5.201.1.17.1 | ||||||||||||
| SradiusServerPortNumber | 1.3.6.1.4.1.3709.3.5.201.1.17.1.2 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current IP port number of RADIUS server. | |||||||||||||
| SradiusServerKey | 1.3.6.1.4.1.3709.3.5.201.1.17.1.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters. | |||||||||||||
| SradiusServerRetransmit | 1.3.6.1.4.1.3709.3.5.201.1.17.1.4 | INTEGER (1..30) | RW | ||||||||||
scalar · INTEGER (1..30) · read-write · current Maximum number of retransmissions for RADIUS. | |||||||||||||
| SradiusServerTimeout | 1.3.6.1.4.1.3709.3.5.201.1.17.1.5 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Timeout for RADIUS. | |||||||||||||
| TradiusMultipleServerTable | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7 | NA | |||||||||||
table · not-accessible · current The table for multiple RADIUS server. | |||||||||||||
| RradiusMultipleServerEntry | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1 | NA | |||||||||||
row · not-accessible · current The conceptual row for radiusMultipleServerTable. | |||||||||||||
| CradiusMultipleServerIndex | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The RADIUS multiple server index. | |||||||||||||
| CradiusMultipleServerAddress | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.2 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current IP address of a multiple RADIUS server. IP address will be set to system default value(e.g. 10.1.0.1) after creates an entry first by setting radiusMultipleServerStatus to valid. | |||||||||||||
| CradiusMultipleServerPortNumber | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.3 | Integer32 (1..65535) | RC | ||||||||||
column · Integer32 (1..65535) · read-create · current IP port number of a multiple RADIUS server. | |||||||||||||
| CradiusMultipleServerKey | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.4 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. when this variable is written, it's max length is 48 characters. | |||||||||||||
| CradiusMultipleServerRetransmit | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.5 | INTEGER (1..30) | RW | ||||||||||
column · INTEGER (1..30) · read-write · current Maximum number of retransmissions for RADIUS. | |||||||||||||
| CradiusMultipleServerTimeout | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.6 | INTEGER (1..65535) | RW | ||||||||||
column · INTEGER (1..65535) · read-write · current Timeout for RADIUS. | |||||||||||||
| CradiusMultipleServerStatus | 1.3.6.1.4.1.3709.3.5.201.1.17.1.7.1.8 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NsshMgt | 1.3.6.1.4.1.3709.3.5.201.1.17.2 | ||||||||||||
| SsshServerStatus | 1.3.6.1.4.1.3709.3.5.201.1.17.2.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. | |||||||||||||
| SsshServerMajorVersion | 1.3.6.1.4.1.3709.3.5.201.1.17.2.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The major version of the SSH Server. | |||||||||||||
| SsshServerMinorVersion | 1.3.6.1.4.1.3709.3.5.201.1.17.2.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The minor version of the SSH Server. | |||||||||||||
| SsshTimeout | 1.3.6.1.4.1.3709.3.5.201.1.17.2.4 | INTEGER (1..120) | RW | ||||||||||
scalar · INTEGER (1..120) · read-write · current The time interval that the router waits for the SSH client to respond. The range is 1-120.
| |||||||||||||
| SsshKeySize | 1.3.6.1.4.1.3709.3.5.201.1.17.2.5 | INTEGER (512..896) | RW | ||||||||||
scalar · INTEGER (512..896) · read-write · current The SSH server key size. | |||||||||||||
| SsshRsaHostKey | 1.3.6.1.4.1.3709.3.5.201.1.17.2.6 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The RSA host key. | |||||||||||||
| SsshDsaHostKey | 1.3.6.1.4.1.3709.3.5.201.1.17.2.7 | KeySegment | RO | ||||||||||
scalar · KeySegment · read-only · current The DSA host key. | |||||||||||||
| SsshHostKeyGenAction | 1.3.6.1.4.1.3709.3.5.201.1.17.2.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA host key, if genBothKeys(4) is set, both RSA and DSA host key are generated. For the get behavior: You will get genRsaKey(2), genDsaKey(3) or genBothKeys(4) when the key gen action is in progress. otherwise, you will get noGen(1).
| |||||||||||||
| SsshHostKeyDelAction | 1.3.6.1.4.1.3709.3.5.201.1.17.2.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(4) to delete both RSA and DSA host key. For the get behavior: You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4) when the delete operation is in progress. Otherwise, you will get noDel(1).
| |||||||||||||
| NipFilterMgt | 1.3.6.1.4.1.3709.3.5.201.1.17.3 | ||||||||||||
| TipFilterSnmpTable | 1.3.6.1.4.1.3709.3.5.201.1.17.3.1 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterSnmpEntry | 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow to connect to this device through SNMP. | |||||||||||||
| CipFilterSnmpAddress | 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterSnmpMask | 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP mask. | |||||||||||||
| CipFilterSnmpStatus | 1.3.6.1.4.1.3709.3.5.201.1.17.3.1.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TipFilterHTTPTable | 1.3.6.1.4.1.3709.3.5.201.1.17.3.2 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterHTTPEntry | 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow to connect to this device through SNMP. | |||||||||||||
| CipFilterHTTPAddress | 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterHTTPMask | 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP mask. | |||||||||||||
| CipFilterHTTPStatus | 1.3.6.1.4.1.3709.3.5.201.1.17.3.2.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TipFilterTelnetTable | 1.3.6.1.4.1.3709.3.5.201.1.17.3.3 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterTelnetEntry | 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow them to connect to this device through SNMP. | |||||||||||||
| CipFilterTelnetAddress | 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterTelnetMask | 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP mask. | |||||||||||||
| CipFilterTelnetStatus | 1.3.6.1.4.1.3709.3.5.201.1.17.3.3.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| TipFilterSSHTable | 1.3.6.1.4.1.3709.3.5.201.1.17.3.4 | NA | |||||||||||
table · not-accessible · current A list of IP address entries. | |||||||||||||
| RipFilterSSHEntry | 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1 | NA | |||||||||||
row · not-accessible · current This entry includes an IP address range which the system will allow them to connect to this device through SNMP. | |||||||||||||
| CipFilterSSHAddress | 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.1 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The start IP address. | |||||||||||||
| CipFilterSSHMask | 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.2 | IpAddress | NA | ||||||||||
column · IpAddress · not-accessible · current The IP mask. | |||||||||||||
| CipFilterSSHStatus | 1.3.6.1.4.1.3709.3.5.201.1.17.3.4.1.3 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NsysLogMgt | 1.3.6.1.4.1.3709.3.5.201.1.19 | ||||||||||||
| SsysLogStatus | 1.3.6.1.4.1.3709.3.5.201.1.19.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Whether system log is enabled.
| |||||||||||||
| SsysLogHistoryFlashLevel | 1.3.6.1.4.1.3709.3.5.201.1.19.2 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current Severity level for logging to flash. | |||||||||||||
| SsysLogHistoryRamLevel | 1.3.6.1.4.1.3709.3.5.201.1.19.3 | INTEGER (0..7) | RW | ||||||||||
scalar · INTEGER (0..7) · read-write · current Severity level for logging to RAM. | |||||||||||||
| NremoteLogMgt | 1.3.6.1.4.1.3709.3.5.201.1.19.6 | ||||||||||||
| SremoteLogStatus | 1.3.6.1.4.1.3709.3.5.201.1.19.6.1 | EnabledStatus | RW | ||||||||||
scalar · EnabledStatus · read-write · current Whether the remote log system is enabled. | |||||||||||||
| SremoteLogLevel | 1.3.6.1.4.1.3709.3.5.201.1.19.6.2 | Integer32 (0..7) | RW | ||||||||||
scalar · Integer32 (0..7) · read-write · current Severity level for remote log. | |||||||||||||
| SremoteLogFacilityType | 1.3.6.1.4.1.3709.3.5.201.1.19.6.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The FacilityType for remote log.
| |||||||||||||
| TremoteLogServerTable | 1.3.6.1.4.1.3709.3.5.201.1.19.6.4 | NA | |||||||||||
table · not-accessible · current A Table for storing the remote log Server list. | |||||||||||||
| RremoteLogServerEntry | 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1 | NA | |||||||||||
| CremoteLogServerIp | 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.1 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The IP address of the remote log Server. | |||||||||||||
| CremoteLogServerStatus | 1.3.6.1.4.1.3709.3.5.201.1.19.6.4.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| NsysTimeMgt | 1.3.6.1.4.1.3709.3.5.201.1.20 | ||||||||||||
| NsntpMgt | 1.3.6.1.4.1.3709.3.5.201.1.20.1 | ||||||||||||
| SsntpStatus | 1.3.6.1.4.1.3709.3.5.201.1.20.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP.
| |||||||||||||
| SsntpPollInterval | 1.3.6.1.4.1.3709.3.5.201.1.20.1.2 | Integer32 (16..16384) | RW | ||||||||||
scalar · Integer32 (16..16384) · read-write · current Polling interval. | |||||||||||||
| TsntpServerTable | 1.3.6.1.4.1.3709.3.5.201.1.20.1.3 | NA | |||||||||||
table · not-accessible · current Table for SNTP servers | |||||||||||||
| RsntpServerEntry | 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1 | NA | |||||||||||
| CsntpServerIp | 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.1 | IpAddress | RC | ||||||||||
column · IpAddress · read-create · current The IP address of a server. | |||||||||||||
| CsntpServerStatus | 1.3.6.1.4.1.3709.3.5.201.1.20.1.3.1.2 | ValidStatus | RC | ||||||||||
column · ValidStatus · read-create · current Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. | |||||||||||||
| SsysCurrentTime | 1.3.6.1.4.1.3709.3.5.201.1.20.2 | DisplayString (SIZE (20)) | RW | ||||||||||
scalar · DisplayString (SIZE (20)) · read-write · current It is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' is the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by the space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'. | |||||||||||||
| SsysTimeZone | 1.3.6.1.4.1.3709.3.5.201.1.20.3 | DisplayString (SIZE (6)) | RW | ||||||||||
scalar · DisplayString (SIZE (6)) · read-write · current It is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a negative offset, this is '-'. 'hh:mm' in the hour and minute offset from UTC. A single-digit hour is preceded by a zero. | |||||||||||||
| SsysTimeZoneName | 1.3.6.1.4.1.3709.3.5.201.1.20.4 | DisplayString (SIZE (0..30)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..30)) · read-write · current The name of the time zone. | |||||||||||||
| NfileMgt | 1.3.6.1.4.1.3709.3.5.201.1.21 | ||||||||||||
| TfileInfoTable | 1.3.6.1.4.1.3709.3.5.201.1.21.1 | NA | |||||||||||
table · not-accessible · current This table contain the information of the file system; we can also perform the delete, set startup file operation. | |||||||||||||
| RfileInfoEntry | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for fileInfoTable. | |||||||||||||
| CfileInfoUnitID | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The switch unit in a stacking system, in a non-stacking system, this value is always 1. | |||||||||||||
| CfileInfoFileIndex | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.2 | Integer32 | NA | ||||||||||
| CfileInfoFlashId | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.3 | Integer32 | RO | ||||||||||
| CfileInfoFileName | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.4 | DisplayString (SIZE (1..32)) | RO | ||||||||||
column · DisplayString (SIZE (1..32)) · read-only · current The file Name of the file System in the device. | |||||||||||||
| CfileInfoFileType | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The file type of the file System in the device.
| |||||||||||||
| CfileInfoIsStartUp | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.6 | TruthValue | RW | ||||||||||
column · TruthValue · read-write · current This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is a invalid operation. | |||||||||||||
| CfileInfoFileSize | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The sizes (in bytes) of the file.
| |||||||||||||
| CfileInfoCreationTime | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.8 | DisplayString (SIZE (20)) | RO | ||||||||||
column · DisplayString (SIZE (20)) · read-only · current The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is the day of month. A single-digit day is preceded by a space. 'hh:mm:ss' is a 24-hour representations of hours, minutes, and seconds. A single-digit hour is preceded by a zero. 'yyyy' is the four-digit year. An example is: 'Jan 1 02:03:04 2002'. | |||||||||||||
| CfileInfoDelete | 1.3.6.1.4.1.3709.3.5.201.1.21.1.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Write this object to delete(2) to delete a file, when read, this always return noDelete(1).
| |||||||||||||
| NcountMgt | 1.3.6.1.4.1.3709.3.5.201.1.22 | ||||||||||||
| TcountHoldPktsTable | 1.3.6.1.4.1.3709.3.5.201.1.22.1 | NA | |||||||||||
table · not-accessible · current Table of dropped packets counters by interface for QoS statistics. | |||||||||||||
| RcountHoldPktsEntry | 1.3.6.1.4.1.3709.3.5.201.1.22.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing the number of dropped packets in a single interface.
| |||||||||||||
| CinterfaceNumber | 1.3.6.1.4.1.3709.3.5.201.1.22.1.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Interface Number from dropped packets. | |||||||||||||
| CcountHoldPkts | 1.3.6.1.4.1.3709.3.5.201.1.22.1.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Counter Hold shows the number of dropped packets in a single interface. | |||||||||||||
| NfilterCounterMgt | 1.3.6.1.4.1.3709.3.5.201.1.23 | ||||||||||||
| TfilterCounterInfoTable | 1.3.6.1.4.1.3709.3.5.201.1.23.1 | NA | |||||||||||
table · not-accessible · current This table contain the description about counters,
so they can be used to measure performance from user-based
filters. | |||||||||||||
| RfilterCounterInfoEntry | 1.3.6.1.4.1.3709.3.5.201.1.23.1.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for filterCounterInfoTable. | |||||||||||||
| CfilterCounterInfoIndex | 1.3.6.1.4.1.3709.3.5.201.1.23.1.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Index for counter, matches current CLI information | |||||||||||||
| CfilterCounterInfoRemark | 1.3.6.1.4.1.3709.3.5.201.1.23.1.1.2 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current Remark is a textual description, as configured by user. | |||||||||||||
| TfilterCounterValueTable | 1.3.6.1.4.1.3709.3.5.201.1.23.2 | NA | |||||||||||
table · not-accessible · current This table contains current values for filter counters. | |||||||||||||
| RfilterCounterValueEntry | 1.3.6.1.4.1.3709.3.5.201.1.23.2.1 | NA | |||||||||||
row · not-accessible · current A conceptually row for filterCounterValueTable. | |||||||||||||
| CfilterCounterValueIndex | 1.3.6.1.4.1.3709.3.5.201.1.23.2.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Subcounters index identifies each internal counter that a user-editable counter can have. Internal counters may differ from equipament model to other. | |||||||||||||
| CfilterCounterValue | 1.3.6.1.4.1.3709.3.5.201.1.23.2.1.2 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The total number of data which matches internal subcounter. It can be bytes or packets, according to equipment configuration. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times. | |||||||||||||
| NeapsMgt | 1.3.6.1.4.1.3709.3.5.201.1.24 | ||||||||||||
| TeapsInfoTable | 1.3.6.1.4.1.3709.3.5.201.1.24.1 | NA | |||||||||||
table · not-accessible · current This table contains EAPS information about all EAPS domains on this device. | |||||||||||||
| ReapsInfoEntry | 1.3.6.1.4.1.3709.3.5.201.1.24.1.1 | NA | |||||||||||
row · not-accessible · current An individual entry of this table contains EAPS information related to that EAPS domain.
| |||||||||||||
| CeapsInfoId | 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.1 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This indicates the mode of the EAPS Id. | |||||||||||||
| CeapsInfoName | 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.2 | DisplayString (SIZE (0..32)) | RO | ||||||||||
column · DisplayString (SIZE (0..32)) · read-only · current The EAPS domain name. | |||||||||||||
| CeapsInfoMode | 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This indicates the mode of the EAPS domain.
| |||||||||||||
| CeapsInfoState | 1.3.6.1.4.1.3709.3.5.201.1.24.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This indicates the current EAPS state of this EAPS domain.
| |||||||||||||
| NcfmProbeMgmt | 1.3.6.1.4.1.3709.3.5.201.1.25 | ||||||||||||
| TcfmProbeDmTable | 1.3.6.1.4.1.3709.3.5.201.1.25.1 | NA | |||||||||||
table · not-accessible · current This table contains CFM delay measurements informationS. | |||||||||||||
| RcfmProbeDmEntry | 1.3.6.1.4.1.3709.3.5.201.1.25.1.1 | NA | |||||||||||
row · not-accessible · current An individual entry of this table contains CFM delay measurements information related to that probe.
| |||||||||||||
| CcfmProbeDmIndex | 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.1 | INTEGER (1..32) | RO | ||||||||||
column · INTEGER (1..32) · read-only · current The index value used to identify the probe. | |||||||||||||
| CcfmProbeDmAvgDelay | 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The average delay in microseconds of CFM delay measurement. | |||||||||||||
| CcfmProbeDmAvgJitter | 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The average jitter in microseconds of CFM delay measurement. | |||||||||||||
| CcfmProbeDmLoss | 1.3.6.1.4.1.3709.3.5.201.1.25.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The percentage of CFM frames lost on the indicate probe. | |||||||||||||
| NcpumonMgmt | 1.3.6.1.4.1.3709.3.5.201.1.26 | ||||||||||||
| TcpuActiveUsageTable | 1.3.6.1.4.1.3709.3.5.201.1.26.1 | NA | |||||||||||
table · not-accessible · current Table of cpu usage. | |||||||||||||
| RcpuActiveUsageEntry | 1.3.6.1.4.1.3709.3.5.201.1.26.1.1 | NA | |||||||||||
| CcpuActiveUsageIndex | 1.3.6.1.4.1.3709.3.5.201.1.26.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | |||||||||||||
| CcpuActiveUsageValue | 1.3.6.1.4.1.3709.3.5.201.1.26.1.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The CPU usage (in hundredths of a percent). | |||||||||||||
| TmemActiveUsageTable | 1.3.6.1.4.1.3709.3.5.201.1.26.2 | NA | |||||||||||
table · not-accessible · current Table of memory usage. | |||||||||||||
| RmemActiveUsageEntry | 1.3.6.1.4.1.3709.3.5.201.1.26.2.1 | NA | |||||||||||
| CmemActiveUsageIndex | 1.3.6.1.4.1.3709.3.5.201.1.26.2.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | |||||||||||||
| CmemActiveUsageValue | 1.3.6.1.4.1.3709.3.5.201.1.26.2.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The memory usage (percentage). | |||||||||||||
| TcpuStandbyUsageTable | 1.3.6.1.4.1.3709.3.5.201.1.26.3 | NA | |||||||||||
table · not-accessible · current Table of cpu usage. | |||||||||||||
| RcpuStandbyUsageEntry | 1.3.6.1.4.1.3709.3.5.201.1.26.3.1 | NA | |||||||||||
| CcpuStandbyUsageIndex | 1.3.6.1.4.1.3709.3.5.201.1.26.3.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | |||||||||||||
| CcpuStandbyUsageValue | 1.3.6.1.4.1.3709.3.5.201.1.26.3.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The CPU usage (in hundredths of a percent). | |||||||||||||
| TmemStandbyUsageTable | 1.3.6.1.4.1.3709.3.5.201.1.26.4 | NA | |||||||||||
table · not-accessible · current Table of memory usage. | |||||||||||||
| RmemStandbyUsageEntry | 1.3.6.1.4.1.3709.3.5.201.1.26.4.1 | NA | |||||||||||
| CmemStandbyUsageIndex | 1.3.6.1.4.1.3709.3.5.201.1.26.4.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. | |||||||||||||
| CmemStandbyUsageValue | 1.3.6.1.4.1.3709.3.5.201.1.26.4.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The memory usage (percentage). | |||||||||||||
| NqueuePortMgmt | 1.3.6.1.4.1.3709.3.5.201.1.27 | ||||||||||||
| TqueuePortTable | 1.3.6.1.4.1.3709.3.5.201.1.27.1 | NA | |||||||||||
table · not-accessible · current Table for statistics of interface queues. | |||||||||||||
| RqueuePortEntry | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about configuration in one switch port of the switch. | |||||||||||||
| CqueuePortIfIndex | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as ifIndex in the IF-MIB. | |||||||||||||
| CqueuePortQueueIndex | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.2 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current The COS queue from the interface. | |||||||||||||
| CqueuePortSentPackets | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.3 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Counter of sent packets. | |||||||||||||
| CqueuePortSentBytes | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.4 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Counter of sent bytes. | |||||||||||||
| CqueuePortDroppedPackets | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.5 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Counter of dropped packets. | |||||||||||||
| CqueuePortDroppedBytes | 1.3.6.1.4.1.3709.3.5.201.1.27.1.1.6 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current Counter of dropped bytes. | |||||||||||||
| NddTransceiversMgmt | 1.3.6.1.4.1.3709.3.5.201.1.28 | ||||||||||||
| TddTransceiversTable | 1.3.6.1.4.1.3709.3.5.201.1.28.1 | NA | |||||||||||
table · not-accessible · current Transceivers digital diagnostic table. | |||||||||||||
| RddTransceiversEntry | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1 | NA | |||||||||||
row · not-accessible · current An entry in the table, containing information about digital diagnostic. | |||||||||||||
| CddTransceiversIfIndex | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.1 | Integer32 | NA | ||||||||||
column · Integer32 · not-accessible · current This is defined as ifIndex in the IF-MIB. | |||||||||||||
| CddTransceiversTemperature | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.2 | DisplayString (SIZE (0..20)) | RO | 45C | |||||||||
| CddTransceiversVcc3v3 | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.3 | DisplayString (SIZE (0..20)) | RO | 3.2V | |||||||||
| CddTransceiversRxPower | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.4 | DisplayString (SIZE (0..20)) | RO | -9.7dBm | |||||||||
| CddTransceiversTxPower | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.5 | DisplayString (SIZE (0..20)) | RO | -0.2dBm | |||||||||
| CddTransceiversTxBias | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.6 | DisplayString (SIZE (0..20)) | RO | 41.4mA | |||||||||
| SddTransceiversTemperatureValue | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.7 | Integer32 | RO | 45 | |||||||||
| SddTransceiversVcc3v3Value | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.8 | Integer32 | RO | 32 | |||||||||
| SddTransceiversRxPowerValue | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.9 | Integer32 | RO | -96 | |||||||||
| SddTransceiversTxPowerValue | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.10 | Integer32 | RO | -2 | |||||||||
| SddTransceiversTxBiasValue | 1.3.6.1.4.1.3709.3.5.201.1.28.1.1.11 | Integer32 | RO | 414 | |||||||||
| NdmSwitchNotifications | 1.3.6.1.4.1.3709.3.5.201.2 | ||||||||||||
| NdmSwitchTraps | 1.3.6.1.4.1.3709.3.5.201.2.1 | ||||||||||||
| NdmSwitchTrapsPrefix | 1.3.6.1.4.1.3709.3.5.201.2.1.0 | ||||||||||||
| !swLoginFailTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40001 | ||||||||||||
notification · current This trap is sent when an user try logging with a incorrect username or password.
| |||||||||||||
| !swLoginSucessTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40002 | ||||||||||||
notification · current This trap is sent when an user get logging.
| |||||||||||||
| !swStackAttachTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40003 | ||||||||||||
notification · current This trap is sent when a device is attached in stack.
| |||||||||||||
| !swStackDetachTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40004 | ||||||||||||
notification · current This trap is sent when a device is detached from stack.
| |||||||||||||
| !swForbiddenAccessTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40005 | ||||||||||||
notification · current This trap is sent when an incorrect IP address is rejected by the ipfilter. | |||||||||||||
| !swSfpPresenceTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40006 | ||||||||||||
notification · current This trap is sent when a sfp conector is taken off or placed. | |||||||||||||
| !swConfigChangeTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40007 | ||||||||||||
notification · current This trap is sent when the device's config change.
| |||||||||||||
| !swConfigSaveTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40008 | ||||||||||||
notification · current This trap is sent when the device's config is saved. | |||||||||||||
| !swFanStatusChangeTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40009 | ||||||||||||
notification · current This trap is sent when the status of one fan changes. | |||||||||||||
| !swTrapsLostTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40010 | ||||||||||||
notification · current This trap is sent when one or more traps are discarded. | |||||||||||||
| !swPowerStatusChangeTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40011 | ||||||||||||
notification · current This trap is sent when the status of one PSU changes. | |||||||||||||
| !swAlarmTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40012 | ||||||||||||
notification · current This trap is sent when the status of one alarm changes. | |||||||||||||
| !swDuplicatedIp | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40013 | ||||||||||||
notification · current This trap is sent when a duplicate ip is detected. | |||||||||||||
| !swLoopbackOnPortDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40014 | ||||||||||||
notification · current This trap is sent when a loopback on port is detected.
| |||||||||||||
| !swLoopbackOnPortNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40015 | ||||||||||||
notification · current This trap is sent when a loopback on port is no more detected.
| |||||||||||||
| !swUnidirLinkDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40016 | ||||||||||||
notification · current This trap is sent when a unidirectional link on port is detected.
| |||||||||||||
| !swUnidirLinkRecovered | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40017 | ||||||||||||
notification · current This trap is sent when a unidirectional link on port is recovered.
| |||||||||||||
| !swCriticalEventDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40018 | ||||||||||||
notification · current This trap is sent when a critical event on port is detected.
| |||||||||||||
| !swCriticalEventRecovered | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40019 | ||||||||||||
notification · current This trap is sent when a critical event on port is recovered.
| |||||||||||||
| !swLinkFlapDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40020 | ||||||||||||
| !swLinkFlapNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40021 | ||||||||||||
notification · current This trap is sent when a link-flap on port is no more detected.
| |||||||||||||
| !swEapsStatusChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40022 | ||||||||||||
notification · current This trap is sent when the eaps status change. | |||||||||||||
| !swPortSecurityViolation | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40023 | ||||||||||||
| !swHighTemperatureDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40024 | ||||||||||||
notification · current This trap is sent when a high temperature is detected.
| |||||||||||||
| !swHighTemperatureNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40025 | ||||||||||||
notification · current This trap is sent when a high temperature is no more detected.
| |||||||||||||
| !swFuseStatusChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40026 | ||||||||||||
notification · current This trap is sent when the status of on fuse changes.
| |||||||||||||
| !swFansBoardPresenceTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40027 | ||||||||||||
notification · current This trap is sent when the fans board is taken off or placed.
| |||||||||||||
| !swStandbyMpuTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40028 | ||||||||||||
notification · current This trap is sent when the standby MPU is taken off or placed. | |||||||||||||
| !swNonHomologSfpTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40029 | ||||||||||||
notification · current This trap is sent when a non-homologated SFP is placed.
| |||||||||||||
| !swHighCpuUsageDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40030 | ||||||||||||
notification · current This trap is sent when the CPU utilization is greater than 90%.
| |||||||||||||
| !swHighCpuUsageNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40031 | ||||||||||||
notification · current This trap is sent when the CPU utilization is lower than 90%.
| |||||||||||||
| !swDuplicatedMac | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40032 | ||||||||||||
notification · current This trap is sent when a MAC address move is detected.
| |||||||||||||
| !swHighMemoryUsageDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40033 | ||||||||||||
notification · current This trap is sent when the memory utilization is critical.
| |||||||||||||
| !swHighMemoryUsageNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40034 | ||||||||||||
notification · current This trap is sent when the memory utilization is normal.
| |||||||||||||
| !swNewBootloaderVersion | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40035 | ||||||||||||
notification · current This trap is sent when a new bootloader version is saved.
| |||||||||||||
| !swCesopTdmStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40036 | ||||||||||||
notification · current This trap is sent when TDM status change.
| |||||||||||||
| !swCesopTdmRemoteStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40037 | ||||||||||||
notification · current This trap is sent when TDM Remote status change (RALM). | |||||||||||||
| !swCesopTdmCasStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40038 | ||||||||||||
notification · current This trap is sent when TDM Cas status change (LOM). | |||||||||||||
| !swCesopTdmCrcStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40039 | ||||||||||||
notification · current This trap is sent when TDM CRC status change (CRC). | |||||||||||||
| !swCesopBundleLocalTdmStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40040 | ||||||||||||
notification · current This trap is sent when Bundle Local TDM status change. | |||||||||||||
| !swCesopBundleRemoteTdmStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40041 | ||||||||||||
notification · current This trap is sent when Bundle Remote TDM status change. | |||||||||||||
| !swCesopBundleLocalStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40042 | ||||||||||||
notification · current This trap is sent when Bundle Local status change. | |||||||||||||
| !swCesopBundleRemoteStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40043 | ||||||||||||
notification · current This trap is sent when Bundle Remote status change. | |||||||||||||
| !swCesopBundlePktMismatchTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40044 | ||||||||||||
notification · current This trap is sent when Packet mismatch status chanege in Bundle Interface. | |||||||||||||
| !swCesopBundleNextHopTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40045 | ||||||||||||
notification · current This trap is sent when Packet mismatch status chanege in Bundle Interface. | |||||||||||||
| !swCesopClockAdapLinkQualityTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40046 | ||||||||||||
notification · current This trap is sent when Adaptative link quality change in clock source interface. | |||||||||||||
| !swCesopClockSourceTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40047 | ||||||||||||
notification · current This trap is sent when Source clock status change. | |||||||||||||
| !swRemoteDeviceReady | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40048 | ||||||||||||
notification · current This trap is sent when a remote device becomes ready to be managed.
| |||||||||||||
| !swRemoteDeviceLost | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40049 | ||||||||||||
notification · current This trap is sent when a remote device is no longer manageable.
| |||||||||||||
| !swRemoteDeviceConfigFail | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40050 | ||||||||||||
notification · current This trap is sent when the configuration sent to a remote device is rejected.
| |||||||||||||
| !swRemoteDeviceConfigForced | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40051 | ||||||||||||
notification · current This trap is sent when a remote device configuration is forced.
| |||||||||||||
| !swFanFuseStatusChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40052 | ||||||||||||
notification · current This trap is sent when the fan board fuse change its status.
| |||||||||||||
| !swDyingGaspPackReceived | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40053 | ||||||||||||
notification · current This trap is sent every time an OAM:Dying Gasp package is received on port
| |||||||||||||
| !swBroadcastStormCheckChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40054 | ||||||||||||
notification · current This trap is sent when a broadcast storm threshold is hit or recovers. | |||||||||||||
| !swMulticastStormCheckChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40055 | ||||||||||||
notification · current This trap is sent when a multicast storm threshold is hit or recovers. | |||||||||||||
| !swBpduProtectLimit | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40056 | ||||||||||||
notification · current This trap is sent when a BPDU limit has reached.
| |||||||||||||
| !swChangeStatusLDP | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40057 | ||||||||||||
notification · current This trap is sent when occurs one change on status the protocol LDP.
| |||||||||||||
| !swChangeStatusTunnelRSVP | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40058 | ||||||||||||
notification · current This trap is sent when occurs one change on status the tunnels of protocol RSVP. | |||||||||||||
| !swBpduProtect | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40059 | ||||||||||||
notification · current This trap is sent when a BPDU protect block time expired.
| |||||||||||||
| !swRouteTableFull | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40060 | ||||||||||||
notification · current This trap is sent when L3 Routing Table reaches its limits.
| |||||||||||||
| !swPanelStatusTrap | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40061 | ||||||||||||
notification · current This trap is sent when the Panel status change.
| |||||||||||||
| !swLSTGroupLinkStatusDown | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40062 | ||||||||||||
notification · current This trap is sent when a link-state tracking group is down
| |||||||||||||
| !swLSTGroupLinkStatusUp | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40063 | ||||||||||||
notification · current This trap is sent when a link-state tracking group is up
| |||||||||||||
| !swHighCpuL3UsageDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40064 | ||||||||||||
notification · current This trap is sent when the CPU L3 utilization is greater than 90%.
| |||||||||||||
| !swHighCpuL3UsageNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40065 | ||||||||||||
notification · current This trap is sent when the CPU L3 utilization is lower than 90%.
| |||||||||||||
| !swHighMemoryL3UsageDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40066 | ||||||||||||
notification · current This trap is sent when the L3 memory utilization is critical.
| |||||||||||||
| !swHighMemoryL3UsageNoMoreDetected | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40067 | ||||||||||||
notification · current This trap is sent when the L3 memory utilization is normal.
| |||||||||||||
| !swMpuNsfIdDiffers | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40068 | ||||||||||||
notification · current This trap is sent when the active and standby mpu nsf-id differs. | |||||||||||||
| !swErpsStatusChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40069 | ||||||||||||
notification · current This trap is sent when the erps status change. | |||||||||||||
| !swCfmDefect | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40070 | ||||||||||||
notification · current This trap is sent when some CFM MEP enters or leave an error state. | |||||||||||||
| !swLldpRemoteChange | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40071 | ||||||||||||
notification · current This trap is sent when LLDP remote table changes.
| |||||||||||||
| !swPoeOverCurrent | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40072 | ||||||||||||
notification · current This trap is sent when a Power over Ethernet enabled port was shut down due an overcurrent.
| |||||||||||||
| !swPoePowerRestriction | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40073 | ||||||||||||
notification · current This trap is sent when an Power over Ethernet enabled port was shut down because the connected device announced an power consumption over the configured for the port.
| |||||||||||||
| !swCoreDump | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40074 | ||||||||||||
notification · current This trap is sent when an application terminate abnormally and generates a core dump.
| |||||||||||||
| !swElmiEvcStatus | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40075 | ||||||||||||
notification · current This trap is sent when an EVC changes its state.
| |||||||||||||
| !swSyncSystemClockSwitchHier | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40076 | ||||||||||||
notification · current This trap is sent when system changes active clock synchronize hierarchy
| |||||||||||||
| !swSyncSystemClockStatus | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40077 | ||||||||||||
notification · current This trap is sent when system clock changes its status | |||||||||||||
| !swHostTableFull | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40078 | ||||||||||||
notification · current This trap is sent when L3 Host Table reaches its limits.
| |||||||||||||
| !swSyncG704ClockStatus | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40079 | ||||||||||||
notification · current This trap is sent when g704 clock source changes its status. | |||||||||||||
| !swSystemWarningsUnits | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40080 | ||||||||||||
notification · current This trap is sent when warnings in the system units are found. | |||||||||||||
| !swRebootDueToOvertemp | 1.3.6.1.4.1.3709.3.5.201.2.1.0.40081 | ||||||||||||
notification · current This trap is sent when the device reboots due to overheat. | |||||||||||||
| NdmSwitchConformance | 1.3.6.1.4.1.3709.3.5.201.3 | ||||||||||||
Textual conventions
KeySegmentDisplayString (SIZE (0..128))The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257-384) Key4: part 4 of the key (385-512) Key5: part 5 of the key (513-640) Key6: part 6 of the key (641-768) Key7: part 7 of the key (769-896) Key8: part 8 of the key (897-1024) Please note that if the key string is less then 1024 characters, the remaining part of the string will be filled by a zero-length string. For example, if the length of the key is 129, we will get a string of length 128 in Key1, and a string of length 1 in Key2, moreover, Key3 to Key8 will all be zero-length strings.StaPathCostModeINTEGERlong(2)short(1)The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost as a 32 bit value.
ValidStatusINTEGERinvalid(2)valid(1)A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destroys an entry.
Traps / Notifications
- swAlarmTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40012 - swBpduProtect
1.3.6.1.4.1.3709.3.5.201.2.1.0.40059 - swBpduProtectLimit
1.3.6.1.4.1.3709.3.5.201.2.1.0.40056 - swBroadcastStormCheckChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40054 - swCesopBundleLocalStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40042 - swCesopBundleLocalTdmStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40040 - swCesopBundleNextHopTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40045 - swCesopBundlePktMismatchTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40044 - swCesopBundleRemoteStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40043 - swCesopBundleRemoteTdmStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40041 - swCesopClockAdapLinkQualityTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40046 - swCesopClockSourceTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40047 - swCesopTdmCasStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40038 - swCesopTdmCrcStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40039 - swCesopTdmRemoteStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40037 - swCesopTdmStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40036 - swCfmDefect
1.3.6.1.4.1.3709.3.5.201.2.1.0.40070 - swChangeStatusLDP
1.3.6.1.4.1.3709.3.5.201.2.1.0.40057 - swChangeStatusTunnelRSVP
1.3.6.1.4.1.3709.3.5.201.2.1.0.40058 - swConfigChangeTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40007 - swConfigSaveTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40008 - swCoreDump
1.3.6.1.4.1.3709.3.5.201.2.1.0.40074 - swCriticalEventDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40018 - swCriticalEventRecovered
1.3.6.1.4.1.3709.3.5.201.2.1.0.40019 - swDuplicatedIp
1.3.6.1.4.1.3709.3.5.201.2.1.0.40013 - swDuplicatedMac
1.3.6.1.4.1.3709.3.5.201.2.1.0.40032 - swDyingGaspPackReceived
1.3.6.1.4.1.3709.3.5.201.2.1.0.40053 - swEapsStatusChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40022 - swElmiEvcStatus
1.3.6.1.4.1.3709.3.5.201.2.1.0.40075 - swErpsStatusChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40069 - swFanFuseStatusChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40052 - swFanStatusChangeTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40009 - swFansBoardPresenceTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40027 - swForbiddenAccessTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40005 - swFuseStatusChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40026 - swHighCpuL3UsageDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40064 - swHighCpuL3UsageNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40065 - swHighCpuUsageDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40030 - swHighCpuUsageNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40031 - swHighMemoryL3UsageDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40066 - swHighMemoryL3UsageNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40067 - swHighMemoryUsageDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40033 - swHighMemoryUsageNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40034 - swHighTemperatureDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40024 - swHighTemperatureNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40025 - swHostTableFull
1.3.6.1.4.1.3709.3.5.201.2.1.0.40078 - swLSTGroupLinkStatusDown
1.3.6.1.4.1.3709.3.5.201.2.1.0.40062 - swLSTGroupLinkStatusUp
1.3.6.1.4.1.3709.3.5.201.2.1.0.40063 - swLinkFlapDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40020 - swLinkFlapNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40021 - swLldpRemoteChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40071 - swLoginFailTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40001 - swLoginSucessTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40002 - swLoopbackOnPortDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40014 - swLoopbackOnPortNoMoreDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40015 - swMpuNsfIdDiffers
1.3.6.1.4.1.3709.3.5.201.2.1.0.40068 - swMulticastStormCheckChange
1.3.6.1.4.1.3709.3.5.201.2.1.0.40055 - swNewBootloaderVersion
1.3.6.1.4.1.3709.3.5.201.2.1.0.40035 - swNonHomologSfpTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40029 - swPanelStatusTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40061 - swPoeOverCurrent
1.3.6.1.4.1.3709.3.5.201.2.1.0.40072 - swPoePowerRestriction
1.3.6.1.4.1.3709.3.5.201.2.1.0.40073 - swPortSecurityViolation
1.3.6.1.4.1.3709.3.5.201.2.1.0.40023 - swPowerStatusChangeTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40011 - swRebootDueToOvertemp
1.3.6.1.4.1.3709.3.5.201.2.1.0.40081 - swRemoteDeviceConfigFail
1.3.6.1.4.1.3709.3.5.201.2.1.0.40050 - swRemoteDeviceConfigForced
1.3.6.1.4.1.3709.3.5.201.2.1.0.40051 - swRemoteDeviceLost
1.3.6.1.4.1.3709.3.5.201.2.1.0.40049 - swRemoteDeviceReady
1.3.6.1.4.1.3709.3.5.201.2.1.0.40048 - swRouteTableFull
1.3.6.1.4.1.3709.3.5.201.2.1.0.40060 - swSfpPresenceTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40006 - swStackAttachTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40003 - swStackDetachTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40004 - swStandbyMpuTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40028 - swSyncG704ClockStatus
1.3.6.1.4.1.3709.3.5.201.2.1.0.40079 - swSyncSystemClockStatus
1.3.6.1.4.1.3709.3.5.201.2.1.0.40077 - swSyncSystemClockSwitchHier
1.3.6.1.4.1.3709.3.5.201.2.1.0.40076 - swSystemWarningsUnits
1.3.6.1.4.1.3709.3.5.201.2.1.0.40080 - swTrapsLostTrap
1.3.6.1.4.1.3709.3.5.201.2.1.0.40010 - swUnidirLinkDetected
1.3.6.1.4.1.3709.3.5.201.2.1.0.40016 - swUnidirLinkRecovered
1.3.6.1.4.1.3709.3.5.201.2.1.0.40017