DataAire-dap4-al-MIB
CARELThis is the MIB module for the dap4_al device.
snmptranslate -m DataAire-dap4-al-MIB -Tpsnmpwalk -v2c -c <community> -m DataAire-dap4-al-MIB <host> 1.3.6.1.4.1.9839.2.1Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-MIB | sysContact, sysLocation, sysName |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ncarel | 1.3.6.1.4.1.9839 | ||||||||||||||||
| Nsystm | 1.3.6.1.4.1.9839.1 | ||||||||||||||||
| SagentRelease | 1.3.6.1.4.1.9839.1.1 | Integer32 | RO | 4 | |||||||||||||
scalar · Integer32 · read-only · current Release of the Agent.
Example values from LibreNMS test devices
| |||||||||||||||||
| SagentCode | 1.3.6.1.4.1.9839.1.2 | Integer32 | RO | 2 | |||||||||||||
scalar · Integer32 · read-only · current Code of the Agent. 2=pCOWeb.
Example values from LibreNMS test devices
| |||||||||||||||||
| Ninstruments | 1.3.6.1.4.1.9839.2 | ||||||||||||||||
| NpCOWebInfo | 1.3.6.1.4.1.9839.2.0 | ||||||||||||||||
| NpCOStatusgroup | 1.3.6.1.4.1.9839.2.0.10 | ||||||||||||||||
| SpCOId1-Status | 1.3.6.1.4.1.9839.2.0.10.1 | Integer32 | RO | 2 | |||||||||||||
scalar · Integer32 · read-only · current Status of pCOId1. 0=Offline, 1=Init, 2=Online
Example values from LibreNMS test devices
| |||||||||||||||||
| NpCOErrorsNumbergroup | 1.3.6.1.4.1.9839.2.0.11 | ||||||||||||||||
| SpCOId1-ErrorsNumber | 1.3.6.1.4.1.9839.2.0.11.1 | Integer32 | RO | 0 | |||||||||||||
scalar · Integer32 · read-only · current Number of Communication Errors from pCOId1 to pCOWeb.
Example values from LibreNMS test devices
| |||||||||||||||||
| Idap4-alMIB | 1.3.6.1.4.1.9839.2.1 | ||||||||||||||||
identity This is the MIB module for the dap4_al device. | |||||||||||||||||
| NdigitalObjects | 1.3.6.1.4.1.9839.2.1.1 | ||||||||||||||||
| Sdehum-on | 1.3.6.1.4.1.9839.2.1.1.1 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Dehumidify mode is running
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-on | 1.3.6.1.4.1.9839.2.1.1.2 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Humidifier is running
Example values from LibreNMS test devices
| |||||||||||||||||
| Sengy-on | 1.3.6.1.4.1.9839.2.1.1.3 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Energy saver is running
Example values from LibreNMS test devices
| |||||||||||||||||
| Scool-inhibit | 1.3.6.1.4.1.9839.2.1.1.4 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Cooling inhibit from Zone Master
Example values from LibreNMS test devices
| |||||||||||||||||
| Sheat-held | 1.3.6.1.4.1.9839.2.1.1.5 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Heat inhibited due to alarm condition
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumidifier-inhibit | 1.3.6.1.4.1.9839.2.1.1.6 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Humidifier stopped due to alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdehum-inhibit | 1.3.6.1.4.1.9839.2.1.1.7 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Dehum is inhibited
Example values from LibreNMS test devices
| |||||||||||||||||
| Srht-during-dehum | 1.3.6.1.4.1.9839.2.1.1.8 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current reheat during dehum
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfloor-wtr-alm | 1.3.6.1.4.1.9839.2.1.1.9 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Water under floor alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sair-flow-alm | 1.3.6.1.4.1.9839.2.1.1.10 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current No air flow alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfilter-alm | 1.3.6.1.4.1.9839.2.1.1.11 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Dirty filter from digital input
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumidifier-alm | 1.3.6.1.4.1.9839.2.1.1.12 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Alarm from humidifier digital input
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfirestat-alm | 1.3.6.1.4.1.9839.2.1.1.13 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Temperature of return air above firestat alarm set point
Example values from LibreNMS test devices
| |||||||||||||||||
| Sshortcycle-alm | 1.3.6.1.4.1.9839.2.1.1.14 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current One or more comps has short cycled
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumidity-fail | 1.3.6.1.4.1.9839.2.1.1.15 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Sensor is out of range
Example values from LibreNMS test devices
| |||||||||||||||||
| Sret-air-fail | 1.3.6.1.4.1.9839.2.1.1.16 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Sensor is out of range
Example values from LibreNMS test devices
| |||||||||||||||||
| Smaint-alm | 1.3.6.1.4.1.9839.2.1.1.17 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Maintenance Schedule Due alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc1-hp-alm | 1.3.6.1.4.1.9839.2.1.1.18 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current High pressure alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc1-lp-alm | 1.3.6.1.4.1.9839.2.1.1.19 | Integer32 (0..1) | RO | 1 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Low pressure alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc2-hp-alm | 1.3.6.1.4.1.9839.2.1.1.20 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current High pressure alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc2-lp-alm | 1.3.6.1.4.1.9839.2.1.1.21 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Low pressure alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Ssmoke-alm | 1.3.6.1.4.1.9839.2.1.1.22 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Smoke detected from digital input
Example values from LibreNMS test devices
| |||||||||||||||||
| Swtr-flow-alm | 1.3.6.1.4.1.9839.2.1.1.23 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current No water flow alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdisch-air-fail | 1.3.6.1.4.1.9839.2.1.1.24 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Sensor is out of range
Example values from LibreNMS test devices
| |||||||||||||||||
| Sra-tmp-hi-alm | 1.3.6.1.4.1.9839.2.1.1.25 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Temperature of return air above alarm set point
Example values from LibreNMS test devices
| |||||||||||||||||
| Sra-tmp-lo-alm | 1.3.6.1.4.1.9839.2.1.1.26 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Temperature of return air below alarm set point
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-hi-alm | 1.3.6.1.4.1.9839.2.1.1.27 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Humidity above alarm set point
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-lo-alm | 1.3.6.1.4.1.9839.2.1.1.28 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Humidity below alarm set point
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-overload | 1.3.6.1.4.1.9839.2.1.1.29 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Fan overload
Example values from LibreNMS test devices
| |||||||||||||||||
| Sstdby-pump-on | 1.3.6.1.4.1.9839.2.1.1.30 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Standby pump on: Check primary pump -Optional alarm. Pump failure input signal required
Example values from LibreNMS test devices
| |||||||||||||||||
| Scust-msg-sw1 | 1.3.6.1.4.1.9839.2.1.1.31 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Custom alarm #1 -Optional alarm. External alarm input required. Factory programmed custom message required
Example values from LibreNMS test devices
| |||||||||||||||||
| Scust-msg-sw2 | 1.3.6.1.4.1.9839.2.1.1.32 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Custom alarm #2 -Optional alarm. External alarm input required. Factory programmed custom message required
Example values from LibreNMS test devices
| |||||||||||||||||
| Scust-msg-sw3 | 1.3.6.1.4.1.9839.2.1.1.33 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Custom alarm #3 -Optional alarm. External alarm input required. Factory programmed custom message required
Example values from LibreNMS test devices
| |||||||||||||||||
| Scust-msg-sw4 | 1.3.6.1.4.1.9839.2.1.1.34 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Custom alarm #4 -Optional alarm. External alarm input required. Factory programmed custom message required
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumsw-inhibit | 1.3.6.1.4.1.9839.2.1.1.35 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Humidifier stopped due to custom alarm switch
Example values from LibreNMS test devices
| |||||||||||||||||
| Sheat-inhibit | 1.3.6.1.4.1.9839.2.1.1.36 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Heat inhibited due to custom switch alarm condition
Example values from LibreNMS test devices
| |||||||||||||||||
| Srht-hum-inhibit | 1.3.6.1.4.1.9839.2.1.1.37 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Reheat and humidification inhibited from operation
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdisch-tmp-lo-alm | 1.3.6.1.4.1.9839.2.1.1.38 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Temperature of discharge air below alarm set point
Example values from LibreNMS test devices
| |||||||||||||||||
| Soverride-alm | 1.3.6.1.4.1.9839.2.1.1.39 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Manual override: Check bypass switches - Standard alarm. Manual override switch is on
Example values from LibreNMS test devices
| |||||||||||||||||
| Scondensation-alm | 1.3.6.1.4.1.9839.2.1.1.40 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current High condensation from digital input
Example values from LibreNMS test devices
| |||||||||||||||||
| Sunit-in-standby | 1.3.6.1.4.1.9839.2.1.1.41 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Unit in standby, all functions held off - Optional alarm. Control input signal required Factory setting required
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-sns-fail | 1.3.6.1.4.1.9839.2.1.1.42 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Sensor is out of range
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumsw-chk-cyl | 1.3.6.1.4.1.9839.2.1.1.43 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Humidifier stopped due to custom alarm switch
Example values from LibreNMS test devices
| |||||||||||||||||
| Sbms-cooling-inhibit | 1.3.6.1.4.1.9839.2.1.1.44 | Integer32 (0..1) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-write · current Cooling operation inhibited by BMS
Example values from LibreNMS test devices
| |||||||||||||||||
| Sbms-heat-inhibit | 1.3.6.1.4.1.9839.2.1.1.45 | Integer32 (0..1) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-write · current Heat inhibited due to bms
Example values from LibreNMS test devices
| |||||||||||||||||
| Sbms-humidifier-inhibit | 1.3.6.1.4.1.9839.2.1.1.46 | Integer32 (0..1) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-write · current Humidifier operation inhibited by BMS
Example values from LibreNMS test devices
| |||||||||||||||||
| Sbms-dehum-inhibit | 1.3.6.1.4.1.9839.2.1.1.47 | Integer32 (0..1) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-write · current Dehumidify mode inhibited by bms
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-inhibit-bms | 1.3.6.1.4.1.9839.2.1.1.48 | Integer32 (0..1) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-write · current Inhibit fan by bms
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-expect | 1.3.6.1.4.1.9839.2.1.1.49 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Reduces control humidity cycling
Example values from LibreNMS test devices
| |||||||||||||||||
| Susashr-f-c | 1.3.6.1.4.1.9839.2.1.1.50 | Integer32 (0..1) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-write · current Temperature Mode 0=_C 1=_F
Example values from LibreNMS test devices
| |||||||||||||||||
| Slead-comp | 1.3.6.1.4.1.9839.2.1.1.52 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Lead compressor select 0= C1, 1= C2
Example values from LibreNMS test devices
| |||||||||||||||||
| Swtrvlv-dir | 1.3.6.1.4.1.9839.2.1.1.53 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Water valve direct or reverse acting
Example values from LibreNMS test devices
| |||||||||||||||||
| Sups-on-alm | 1.3.6.1.4.1.9839.2.1.1.54 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Alarm: UPS power on: Check main power -Optional alarm. External alarm input required
Example values from LibreNMS test devices
| |||||||||||||||||
| Spwrup-alm | 1.3.6.1.4.1.9839.2.1.1.55 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Loss of power requires manual reset of alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sseetag-cust-alm1 | 1.3.6.1.4.1.9839.2.1.1.56 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Local alarm #1: See tag inside door =Optional alarm. External alarm input required
Example values from LibreNMS test devices
| |||||||||||||||||
| Sseetag-cust-alm2 | 1.3.6.1.4.1.9839.2.1.1.57 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Local alarm #2: See tag inside door =Optional alarm. External alarm input required
Example values from LibreNMS test devices
| |||||||||||||||||
| Sseetag-cust-alm3 | 1.3.6.1.4.1.9839.2.1.1.58 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Local alarm #3: See tag inside door =Optional alarm. External alarm input required
Example values from LibreNMS test devices
| |||||||||||||||||
| Sseetag-cust-alm4 | 1.3.6.1.4.1.9839.2.1.1.59 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Local alarm #4: See tag inside door =Optional alarm. External alarm input required
Example values from LibreNMS test devices
| |||||||||||||||||
| Sshortcycle-alm-en | 1.3.6.1.4.1.9839.2.1.1.60 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Enable short cycle alarm of the compressors
Example values from LibreNMS test devices
| |||||||||||||||||
| Ssuperv-off | 1.3.6.1.4.1.9839.2.1.1.61 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Supervisor (BMS) On-Off. Show the state OFFbyBMS in main mask (1: Off; 0: On
Example values from LibreNMS test devices
| |||||||||||||||||
| SBMS-heartbeat | 1.3.6.1.4.1.9839.2.1.1.62 | Integer32 (0..1) | RO | 0 | |||||||||||||
scalar · Integer32 (0..1) · read-only · current Bms heartbeat - pCO looks for update every 10 minutes
Example values from LibreNMS test devices
| |||||||||||||||||
| NanalogObjects | 1.3.6.1.4.1.9839.2.1.2 | ||||||||||||||||
| Sret-air-tmp | 1.3.6.1.4.1.9839.2.1.2.1 | Integer32 (-32768..32767) | RO | 1 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Temperature of return air
Example values from LibreNMS test devices
| |||||||||||||||||
| Sminmax-24hr-retair-maximum | 1.3.6.1.4.1.9839.2.1.2.2 | Integer32 (-32768..32767) | RO | 50 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Maximum Return air temp in last 24hrs
Example values from LibreNMS test devices
| |||||||||||||||||
| Sminmax-24hr-retair-minumum | 1.3.6.1.4.1.9839.2.1.2.3 | Integer32 (-32768..32767) | RO | 80 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Minimum Return air temp in last 24hrs
Example values from LibreNMS test devices
| |||||||||||||||||
| Stemp-setpoint | 1.3.6.1.4.1.9839.2.1.2.4 | Integer32 (-9999..9999) | RW | 330 | |||||||||||||
scalar · Integer32 (-9999..9999) · read-write · current Temperature setpoint
Example values from LibreNMS test devices
| |||||||||||||||||
| Stemp-deadband | 1.3.6.1.4.1.9839.2.1.2.5 | Integer32 (0..99) | RW | 300 | |||||||||||||
scalar · Integer32 (0..99) · read-write · current Amount from setpoint before a comp is staged on
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumidity-ain-offs | 1.3.6.1.4.1.9839.2.1.2.6 | Integer32 (-32768..32767) | RO | 800 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Humidity Sensor Calibration
Example values from LibreNMS test devices
| |||||||||||||||||
| Sreturn-ain-offs | 1.3.6.1.4.1.9839.2.1.2.7 | Integer32 (-32768..32767) | RO | 280 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Return Temperature Sensor Calibration
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-tmp | 1.3.6.1.4.1.9839.2.1.2.8 | Integer32 (-32768..32767) | RO | 492 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Temperature of chilled water
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdisch-air-tmp | 1.3.6.1.4.1.9839.2.1.2.9 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Temperature of discharge air
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdischarge-ain-offs | 1.3.6.1.4.1.9839.2.1.2.10 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Discharge Temperature Sensor Calibration - Optional discharge air temperature sensor required (B9)
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-ain-offs | 1.3.6.1.4.1.9839.2.1.2.11 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Chilled Water Temperature Sensor Calibration - Optional chilled water temperature sensor required (B10)
Example values from LibreNMS test devices
| |||||||||||||||||
| Sengsaver-setpoint | 1.3.6.1.4.1.9839.2.1.2.12 | Integer32 (-9999..9999) | RW | 280 | |||||||||||||
scalar · Integer32 (-9999..9999) · read-write · current Temperature setpoint where chilled water will is requested
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt1-analog | 1.3.6.1.4.1.9839.2.1.2.13 | Integer32 (-32768..32767) | RO | 492 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Value of the analog input
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt2-analog | 1.3.6.1.4.1.9839.2.1.2.14 | Integer32 (-32768..32767) | RO | 491 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Value of the analog input
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt3-analog | 1.3.6.1.4.1.9839.2.1.2.15 | Integer32 (-32768..32767) | RO | -9999 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Value of the analog input
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt4-analog | 1.3.6.1.4.1.9839.2.1.2.16 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Value of the analog input
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-1-y1 | 1.3.6.1.4.1.9839.2.1.2.17 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 1 Minimum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-1-y2 | 1.3.6.1.4.1.9839.2.1.2.18 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 1 Maximum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-1-ain-offs | 1.3.6.1.4.1.9839.2.1.2.19 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 1 Calibration
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-2-y1 | 1.3.6.1.4.1.9839.2.1.2.20 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 2 Minimum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-2-y2 | 1.3.6.1.4.1.9839.2.1.2.21 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 2 Maximum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-2-ain-offs | 1.3.6.1.4.1.9839.2.1.2.22 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 2 Calibration
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-3-y1 | 1.3.6.1.4.1.9839.2.1.2.23 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 3 Minimum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-3-y2 | 1.3.6.1.4.1.9839.2.1.2.24 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 3 Maximum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-3-ain-offs | 1.3.6.1.4.1.9839.2.1.2.25 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 3 Calibration
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-4-y1 | 1.3.6.1.4.1.9839.2.1.2.26 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 4 Minimum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-4-y2 | 1.3.6.1.4.1.9839.2.1.2.27 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 4 Maximum Value
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-4-ain-offs | 1.3.6.1.4.1.9839.2.1.2.28 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Analog Sensor 4 Calibration
Example values from LibreNMS test devices
| |||||||||||||||||
| NintegerObjects | 1.3.6.1.4.1.9839.2.1.3 | ||||||||||||||||
| Sdisch-air-lo-sp | 1.3.6.1.4.1.9839.2.1.3.1 | Integer32 (-32767..32767) | RW | 0 | |||||||||||||
scalar · Integer32 (-32767..32767) · read-write · current Lower Limit alarm of discharge air temp
Example values from LibreNMS test devices
| |||||||||||||||||
| Shumidity-dis | 1.3.6.1.4.1.9839.2.1.3.2 | Integer32 (-999..999) | RO | 0 | |||||||||||||
scalar · Integer32 (-999..999) · read-only · current Relative humidity displayed as xx%
Example values from LibreNMS test devices
| |||||||||||||||||
| Sstages-on | 1.3.6.1.4.1.9839.2.1.3.3 | Integer32 (-32767..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32767..32767) · read-only · current Cooling Stages On, DX only
Example values from LibreNMS test devices
| |||||||||||||||||
| Sheaters-on | 1.3.6.1.4.1.9839.2.1.3.4 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Number of heat stages running
Example values from LibreNMS test devices
| |||||||||||||||||
| Sminmax-24hr-hum-maximum | 1.3.6.1.4.1.9839.2.1.3.5 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Maximum humidity in last 24hrs
Example values from LibreNMS test devices
| |||||||||||||||||
| Sminmax-24hr-hum-minumum | 1.3.6.1.4.1.9839.2.1.3.6 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Minimum humidity in last 24hrs
Example values from LibreNMS test devices
| |||||||||||||||||
| Scomp-duty | 1.3.6.1.4.1.9839.2.1.3.7 | Integer32 (0..999) | RO | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-only · current Cooling Utilization Over Last Hour -Percentage of cooling is used in the last hour of operation; this point applies to DX unit.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sheat-duty | 1.3.6.1.4.1.9839.2.1.3.8 | Integer32 (0..999) | RO | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-only · current Heating Utilization Over Last Hour -Percentage of heating is used in the last hour of operation
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-duty | 1.3.6.1.4.1.9839.2.1.3.9 | Integer32 (0..999) | RO | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-only · current Humidifier Utilization Over Last Hour -Percentage of humidifier is used in the last hour of operation
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc1-hours-h | 1.3.6.1.4.1.9839.2.1.3.10 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 1 Runtime -This point applies to DX unit with one compressor -high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc1-hours-l | 1.3.6.1.4.1.9839.2.1.3.11 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 1 Runtime -This point applies to DX unit with one compressor -low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc2-hours-h | 1.3.6.1.4.1.9839.2.1.3.12 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 2 Runtime -This point applies to DX unit with dual compressor - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc2-hours-l | 1.3.6.1.4.1.9839.2.1.3.13 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 2 Runtime -This point applies to DX unit with dual compressor - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sht1-hours-h | 1.3.6.1.4.1.9839.2.1.3.14 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Heater 1 Runtime - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sht1-hours-l | 1.3.6.1.4.1.9839.2.1.3.15 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Heater 1 Runtime - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Scurrent-second | 1.3.6.1.4.1.9839.2.1.3.16 | Integer32 (0..59) | RO | 0 | |||||||||||||
scalar · Integer32 (0..59) · read-only · current Current second
Example values from LibreNMS test devices
| |||||||||||||||||
| Scurrent-minute | 1.3.6.1.4.1.9839.2.1.3.17 | Integer32 (0..59) | RO | 0 | |||||||||||||
scalar · Integer32 (0..59) · read-only · current Current minute
Example values from LibreNMS test devices
| |||||||||||||||||
| Scurrent-hour | 1.3.6.1.4.1.9839.2.1.3.18 | Integer32 (0..23) | RO | 0 | |||||||||||||
scalar · Integer32 (0..23) · read-only · current Current hour
Example values from LibreNMS test devices
| |||||||||||||||||
| Scurrent-day | 1.3.6.1.4.1.9839.2.1.3.19 | Integer32 (1..31) | RO | 0 | |||||||||||||
scalar · Integer32 (1..31) · read-only · current Current day
Example values from LibreNMS test devices
| |||||||||||||||||
| Scurrent-month | 1.3.6.1.4.1.9839.2.1.3.20 | Integer32 (1..12) | RO | 0 | |||||||||||||
scalar · Integer32 (1..12) · read-only · current Current month
Example values from LibreNMS test devices
| |||||||||||||||||
| Scurrent-year | 1.3.6.1.4.1.9839.2.1.3.21 | Integer32 (0..99) | RO | 0 | |||||||||||||
scalar · Integer32 (0..99) · read-only · current Current year
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfirestat-sp | 1.3.6.1.4.1.9839.2.1.3.22 | Integer32 (0..999) | RW | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-write · current Alarm settting of return air temp to determine there is a fire
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-hi-sp | 1.3.6.1.4.1.9839.2.1.3.23 | Integer32 (0..99) | RW | 0 | |||||||||||||
scalar · Integer32 (0..99) · read-write · current Humidity upper limit alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sret-air-hi-sp | 1.3.6.1.4.1.9839.2.1.3.24 | Integer32 (-32768..32767) | RW | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-write · current Upper limit alarm of return air temp
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-lo-sp | 1.3.6.1.4.1.9839.2.1.3.25 | Integer32 (0..99) | RW | 0 | |||||||||||||
scalar · Integer32 (0..99) · read-write · current Humidity lower limit alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sret-air-lo-sp | 1.3.6.1.4.1.9839.2.1.3.26 | Integer32 (-32768..32767) | RW | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-write · current Lower limit alarm of return air temp
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-deadband | 1.3.6.1.4.1.9839.2.1.3.27 | Integer32 (0..999) | RW | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-write · current amount hum must change from setpoint before acting
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-setpoint | 1.3.6.1.4.1.9839.2.1.3.28 | Integer32 (0..999) | RW | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-write · current humidity setpoint
Example values from LibreNMS test devices
| |||||||||||||||||
| Sstart-dly | 1.3.6.1.4.1.9839.2.1.3.29 | Integer32 (1..600) | RW | 0 | |||||||||||||
scalar · Integer32 (1..600) · read-write · current Time before the system starts up
Example values from LibreNMS test devices
| |||||||||||||||||
| Salm1-del | 1.3.6.1.4.1.9839.2.1.3.30 | Integer32 (0..32000) | RO | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-only · current Optional Alarm 1 Delay
Example values from LibreNMS test devices
| |||||||||||||||||
| Salm2-del | 1.3.6.1.4.1.9839.2.1.3.31 | Integer32 (0..32000) | RO | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-only · current Optional Alarm 2 Delay
Example values from LibreNMS test devices
| |||||||||||||||||
| Salm3-del | 1.3.6.1.4.1.9839.2.1.3.32 | Integer32 (0..32000) | RO | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-only · current Optional Alarm 3 Delay
Example values from LibreNMS test devices
| |||||||||||||||||
| Salarm1-txt | 1.3.6.1.4.1.9839.2.1.3.33 | Integer32 (0..16) | RO | 0 | |||||||||||||
scalar · Integer32 (0..16) · read-only · current Message on optional alarm screen, some also add function
Example values from LibreNMS test devices
| |||||||||||||||||
| Salarm2-txt | 1.3.6.1.4.1.9839.2.1.3.34 | Integer32 (0..16) | RO | 0 | |||||||||||||
scalar · Integer32 (0..16) · read-only · current Message on optional alarm screen, some also add function
Example values from LibreNMS test devices
| |||||||||||||||||
| Salarm3-txt | 1.3.6.1.4.1.9839.2.1.3.35 | Integer32 (0..16) | RO | 0 | |||||||||||||
scalar · Integer32 (0..16) · read-only · current Message on optional alarm screen, some also add function
Example values from LibreNMS test devices
| |||||||||||||||||
| Salarm4-txt | 1.3.6.1.4.1.9839.2.1.3.36 | Integer32 (0..16) | RO | 0 | |||||||||||||
scalar · Integer32 (0..16) · read-only · current Message on optional alarm screen, some also add function
Example values from LibreNMS test devices
| |||||||||||||||||
| Scomp-sel | 1.3.6.1.4.1.9839.2.1.3.37 | Integer32 (0..5) | RO | 0 | |||||||||||||
scalar · Integer32 (0..5) · read-only · current Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdehum-mode | 1.3.6.1.4.1.9839.2.1.3.38 | Integer32 (0..4) | RO | 0 | |||||||||||||
scalar · Integer32 (0..4) · read-only · current 0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited
Example values from LibreNMS test devices
| |||||||||||||||||
| Sreheat-sel | 1.3.6.1.4.1.9839.2.1.3.39 | Integer32 (0..3) | RO | 0 | |||||||||||||
scalar · Integer32 (0..3) · read-only · current Number of heat stages
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-sel | 1.3.6.1.4.1.9839.2.1.3.40 | Integer32 (0..4) | RO | 0 | |||||||||||||
scalar · Integer32 (0..4) · read-only · current 0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod
Example values from LibreNMS test devices
| |||||||||||||||||
| Salm-contact-msg | 1.3.6.1.4.1.9839.2.1.3.41 | Integer32 (0..4) | RO | 0 | |||||||||||||
scalar · Integer32 (0..4) · read-only · current Text displayed on all alarm screens
Example values from LibreNMS test devices
| |||||||||||||||||
| Spowerup-sel | 1.3.6.1.4.1.9839.2.1.3.42 | Integer32 (0..2) | RO | 0 | |||||||||||||
scalar · Integer32 (0..2) · read-only · current 0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm
Example values from LibreNMS test devices
| |||||||||||||||||
| Sbuzzer-select | 1.3.6.1.4.1.9839.2.1.3.43 | Integer32 (0..3) | RO | 0 | |||||||||||||
scalar · Integer32 (0..3) · read-only · current 0=None, 1=short beeps, 2=long beep, 3=Constant
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-disp | 1.3.6.1.4.1.9839.2.1.3.44 | Integer32 (0..999) | RO | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-only · current % of 10volts of analog output #1
Example values from LibreNMS test devices
| |||||||||||||||||
| Swtrvlv-duty | 1.3.6.1.4.1.9839.2.1.3.45 | Integer32 (0..999) | RO | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-only · current Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units.
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-hours-h | 1.3.6.1.4.1.9839.2.1.3.46 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Humidifier Runtime - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-hours-l | 1.3.6.1.4.1.9839.2.1.3.47 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Humidifier Runtime - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sblower-hours-h | 1.3.6.1.4.1.9839.2.1.3.48 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Blower Runtime - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sblower-hours-l | 1.3.6.1.4.1.9839.2.1.3.49 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Blower Runtime - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Salm4-del | 1.3.6.1.4.1.9839.2.1.3.50 | Integer32 (0..32000) | RO | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-only · current Optional Alarm 4 Delay
Example values from LibreNMS test devices
| |||||||||||||||||
| Sassist-sel | 1.3.6.1.4.1.9839.2.1.3.51 | Integer32 (0..5) | RO | 0 | |||||||||||||
scalar · Integer32 (0..5) · read-only · current 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4...
Example values from LibreNMS test devices
| |||||||||||||||||
| Swtrvlv-sel | 1.3.6.1.4.1.9839.2.1.3.52 | Integer32 (0..4) | RO | 0 | |||||||||||||
scalar · Integer32 (0..4) · read-only · current Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg
Example values from LibreNMS test devices
| |||||||||||||||||
| Swtrvlv-volts-sel | 1.3.6.1.4.1.9839.2.1.3.53 | Integer32 (0..4) | RO | 0 | |||||||||||||
scalar · Integer32 (0..4) · read-only · current Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7
Example values from LibreNMS test devices
| |||||||||||||||||
| Shum-volts | 1.3.6.1.4.1.9839.2.1.3.54 | Integer32 (0..999) | RO | 0 | |||||||||||||
scalar · Integer32 (0..999) · read-only · current % of 10volts of analog output #2
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdehum-hours-h | 1.3.6.1.4.1.9839.2.1.3.55 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Dehumidifier Runtime - High
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdehum-hours-l | 1.3.6.1.4.1.9839.2.1.3.56 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Dehumidifier Runtime - Low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sautoflush-dly | 1.3.6.1.4.1.9839.2.1.3.58 | Integer32 (0..99) | RO | 0 | |||||||||||||
scalar · Integer32 (0..99) · read-only · current Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None
Example values from LibreNMS test devices
| |||||||||||||||||
| Sy4-out | 1.3.6.1.4.1.9839.2.1.3.59 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Value sent to optional analog output#1
Example values from LibreNMS test devices
| |||||||||||||||||
| Sy5-out | 1.3.6.1.4.1.9839.2.1.3.60 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Value sent to optional analog output#2
Example values from LibreNMS test devices
| |||||||||||||||||
| Sair-flow | 1.3.6.1.4.1.9839.2.1.3.61 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Current Fan Airflow - Based on calculated Pressure Diff formula
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-snsr1-name | 1.3.6.1.4.1.9839.2.1.3.62 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Name of the sensor
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-1-ain-type | 1.3.6.1.4.1.9839.2.1.3.63 | Integer32 (0..9) | RO | 0 | |||||||||||||
scalar · Integer32 (0..9) · read-only · current Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-snsr2-name | 1.3.6.1.4.1.9839.2.1.3.64 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Name of the sensor
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-2-ain-type | 1.3.6.1.4.1.9839.2.1.3.65 | Integer32 (0..9) | RO | 0 | |||||||||||||
scalar · Integer32 (0..9) · read-only · current Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-snsr3-name | 1.3.6.1.4.1.9839.2.1.3.66 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Name of the sensor
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-3-ain-type | 1.3.6.1.4.1.9839.2.1.3.67 | Integer32 (0..9) | RO | 0 | |||||||||||||
scalar · Integer32 (0..9) · read-only · current Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-snsr4-name | 1.3.6.1.4.1.9839.2.1.3.68 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Name of the sensor
Example values from LibreNMS test devices
| |||||||||||||||||
| Sopt-sns-4-ain-type | 1.3.6.1.4.1.9839.2.1.3.69 | Integer32 (0..9) | RO | 0 | |||||||||||||
scalar · Integer32 (0..9) · read-only · current Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-fan-speed-bms | 1.3.6.1.4.1.9839.2.1.3.70 | Integer32 (0..100) | RW | 0 | |||||||||||||
scalar · Integer32 (0..100) · read-write · current CW Fan speed (%) sent via BMS
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdx-fan-speed-bms | 1.3.6.1.4.1.9839.2.1.3.71 | Integer32 (0..100) | RW | 0 | |||||||||||||
scalar · Integer32 (0..100) · read-write · current DX Fan speed (%) sent via BMS
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-speed-max | 1.3.6.1.4.1.9839.2.1.3.72 | Integer32 (70..100) | RW | 0 | |||||||||||||
scalar · Integer32 (70..100) · read-write · current Maximum Fan speed (% of output) modulation.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-speed-min | 1.3.6.1.4.1.9839.2.1.3.73 | Integer32 (40..100) | RW | 0 | |||||||||||||
scalar · Integer32 (40..100) · read-write · current Minimum Fan speed (% of output) modulation from pressure.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-pr-sp | 1.3.6.1.4.1.9839.2.1.3.74 | Integer32 (0..1001) | RW | 0 | |||||||||||||
scalar · Integer32 (0..1001) · read-write · current Fan pressure setpoint (0.01 inches of water)
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-pr-band | 1.3.6.1.4.1.9839.2.1.3.75 | Integer32 (1..100) | RW | 0 | |||||||||||||
scalar · Integer32 (1..100) · read-write · current Fan pressure band (0.01 inches of water)
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-af-max | 1.3.6.1.4.1.9839.2.1.3.76 | Integer32 (0..32000) | RW | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-write · current Maximum air flow limit of setpoint from BMS or valve modulation.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-af-min | 1.3.6.1.4.1.9839.2.1.3.77 | Integer32 (0..32000) | RW | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-write · current Minimum air flow limit of setpoint from BMS or valve modulation.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-kfactor | 1.3.6.1.4.1.9839.2.1.3.78 | Integer32 (100..500) | RW | 0 | |||||||||||||
scalar · Integer32 (100..500) · read-write · current Fan K Factor
Example values from LibreNMS test devices
| |||||||||||||||||
| Snum-fans | 1.3.6.1.4.1.9839.2.1.3.79 | Integer32 (1..3) | RW | 0 | |||||||||||||
scalar · Integer32 (1..3) · read-write · current Number of fans installed in this unit
Example values from LibreNMS test devices
| |||||||||||||||||
| Sht2-hours-h | 1.3.6.1.4.1.9839.2.1.3.81 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Heater 2 Runtime - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sht2-hours-l | 1.3.6.1.4.1.9839.2.1.3.82 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Heater 2 Runtime - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sht3-hours-h | 1.3.6.1.4.1.9839.2.1.3.83 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Heater 3 Runtime - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sht3-hours-l | 1.3.6.1.4.1.9839.2.1.3.84 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Heater 3 Runtime - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sengy-hours-h | 1.3.6.1.4.1.9839.2.1.3.85 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Energy Saver Runtime - This optional point applies to energy saver units only -high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sengy-hours-l | 1.3.6.1.4.1.9839.2.1.3.86 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Energy Saver Runtime - This optional point applies to energy saver units only - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-hours-h | 1.3.6.1.4.1.9839.2.1.3.87 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Chilled Water Runtime - This applies to chilled water units only - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-hours-l | 1.3.6.1.4.1.9839.2.1.3.88 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Chilled Water Runtime - This applies to chilled water units only - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc3-hours-h | 1.3.6.1.4.1.9839.2.1.3.89 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc3-hours-l | 1.3.6.1.4.1.9839.2.1.3.90 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc4-hours-l | 1.3.6.1.4.1.9839.2.1.3.91 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Sc4-hours-h | 1.3.6.1.4.1.9839.2.1.3.92 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Scond-hours-h | 1.3.6.1.4.1.9839.2.1.3.93 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Condenser Runtime - high
Example values from LibreNMS test devices
| |||||||||||||||||
| Scond-hours-l | 1.3.6.1.4.1.9839.2.1.3.94 | Integer32 (-32768..32767) | RO | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-only · current Condenser Runtime - low
Example values from LibreNMS test devices
| |||||||||||||||||
| Sdx-fan-speed | 1.3.6.1.4.1.9839.2.1.3.95 | Integer32 (60..100) | RO | 0 | |||||||||||||
scalar · Integer32 (60..100) · read-only · current Fan speed (% of output) when compressor cooling.
Example values from LibreNMS test devices
| |||||||||||||||||
| Scw-fan-speed | 1.3.6.1.4.1.9839.2.1.3.96 | Integer32 (60..100) | RO | 0 | |||||||||||||
scalar · Integer32 (60..100) · read-only · current Fan speed (% of output) when cold water cooling.
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-af-dx-sp | 1.3.6.1.4.1.9839.2.1.3.97 | Integer32 (0..32000) | RO | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-only · current Fan air flow setpoint for DX unit (cfm)
Example values from LibreNMS test devices
| |||||||||||||||||
| Sfan-af-cw-sp | 1.3.6.1.4.1.9839.2.1.3.98 | Integer32 (0..32000) | RO | 0 | |||||||||||||
scalar · Integer32 (0..32000) · read-only · current Fan air flow setpoint for CW unit (cfm)
Example values from LibreNMS test devices
| |||||||||||||||||
| Szm-airflow-sp | 1.3.6.1.4.1.9839.2.1.3.99 | Integer32 (-32768..32767) | RW | 0 | |||||||||||||
scalar · Integer32 (-32768..32767) · read-write · current Zone Airflow Setpoint kcfm
Example values from LibreNMS test devices
| |||||||||||||||||