SLEV2-Security-MIB
DASAN Co.,LTD.slev2 security
snmptranslate -m SLEV2-Security-MIB -Tpsnmpwalk -v2c -c <community> -m SLEV2-Security-MIB <host> 1.3.6.1.4.1.6296.102.7Imports
| DASAN-SMI | sleV2Mgmt |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressPrefixLength, InetAddressType |
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsleV2Security | 1.3.6.1.4.1.6296.102.7 | |||
identity slev2 security | ||||
| NsleV2SecurityBase | 1.3.6.1.4.1.6296.102.7.1 | |||
| NsleVSecurity4 | 1.3.6.1.4.1.6296.102.7.2 | |||
| NsleV2SecurityACL | 1.3.6.1.4.1.6296.102.7.2.5 | |||
| NsleV2Security4ACLBase | 1.3.6.1.4.1.6296.102.7.2.5.1 | |||
| NsleV2Security4ACLFlow | 1.3.6.1.4.1.6296.102.7.2.5.2 | |||
| NsleV2Security4ACLFlowInfo | 1.3.6.1.4.1.6296.102.7.2.5.2.1 | |||
| TsleV2Security4ACLFlowTable | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1 | NA | ||
table · not-accessible · current ACL flow table. | ||||
| RsleV2Security4ACLFlowEntry | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1 | NA | ||
| CsleV2Security4ACLFlowIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.1 | INTEGER (1..1024) | RO | |
column · INTEGER (1..1024) · read-only · current The index of flow | ||||
| CsleV2Security4ACLFlowName | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.2 | OctetName | RO | |
column · OctetName · read-only · current The name of flow | ||||
| CsleV2Security4ACLFlowSrcIpAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) | ||||
| CsleV2Security4ACLFlowSrcIpAddrMask | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.4 | IntIpAddrMask | RO | |
column · IntIpAddrMask · read-only · current The mask of source IP address The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowDstIpAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) | ||||
| CsleV2Security4ACLFlowDstIpAddrMask | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.6 | IntIpAddrMask | RO | |
column · IntIpAddrMask · read-only · current The mask of destination IP address The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowProtocolType | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.7 | IntProtocolType | RO | |
column · IntProtocolType · read-only · current The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowTcpFlag value is available If the value is u¿¡(17), From sleV2QoS4FlowUdpSrcStartPort to sleV2QoS4FlowUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowIcmpType and sleV2QoS4FlowIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode value is not available The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowTcpSrcStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.8 | IntL4Port | RO | |
column · IntL4Port · read-only · current The start source port in range of source port in TCP packet The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowTcpSrcEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.9 | IntL4Port | RO | |
column · IntL4Port · read-only · current The end source port in range of source port in TCP packet The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowTcpDstStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.10 | IntL4Port | RO | |
column · IntL4Port · read-only · current The start destination port in range of source port in TCP packet. The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowTcpDstEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.11 | IntL4Port | RO | |
column · IntL4Port · read-only · current The end destination port in range of destination port in TCP packet. The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowTcpFlag | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.12 | Bits | RO | |
column · Bits · read-only · current The flag in TCP packet
| ||||
| CsleV2Security4ACLFlowUdpSrcStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.13 | IntL4Port | RO | |
column · IntL4Port · read-only · current The start source port in range of source port in UDP packet The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowUdpSrcEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.14 | IntL4Port | RO | |
column · IntL4Port · read-only · current The end source port in range of source port in UDP packet The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowUdpDstStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.15 | IntL4Port | RO | |
column · IntL4Port · read-only · current The start destination port in range of destination port in UDP packet. The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowUdpDstEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.16 | IntL4Port | RO | |
column · IntL4Port · read-only · current The end destination port in range of destination port in UDP packet. The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowIcmpType | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.17 | IntIcmpType | RO | |
column · IntIcmpType · read-only · current The type of ICMP message The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowIcmpCode | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.18 | IntIcmpCode | RO | |
column · IntIcmpCode · read-only · current The code of ICMP message The value of -1 means any(not set) | ||||
| CsleV2Security4ACLFlowHdrlen | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.19 | INTEGER (0 | 1..15) | RO | |
column · INTEGER (0 | 1..15) · read-only · current The IP header length. The value of 0 means any(not set) | ||||
| CsleV2Security4ACLFlowIpFlag | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current The any flag of IP address.
| ||||
| CsleV2SecurityACLFlowInetAddrType | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.21 | InetAddressType | RO | |
column · InetAddressType · read-only · current IP address type | ||||
| CsleV2SecurityACLFlowSrcInetAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.22 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address to match against the packet¡¯s source IP address. | ||||
| CsleV2SecurityACLFlowDstInetAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.23 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address to match against the packet¡¯s destination IP address. | ||||
| CsleV2SecurityACLFlowSrcInetAddrLen | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.24 | InetAddressPrefixLength | RO | |
column · InetAddressPrefixLength · read-only · current The prefix length of source IP address | ||||
| CsleV2SecurityACLFlowDstInetAddrLen | 1.3.6.1.4.1.6296.102.7.2.5.2.1.1.1.25 | InetAddressPrefixLength | RO | |
column · InetAddressPrefixLength · read-only · current The prefix length of destination IP address | ||||
| NsleV2Security4ACLFlowControl | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2 | |||
| SsleV2Security4ACLFlowControlRequest | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2Security4ACLFlowControlStatus | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2Security4ACLFlowControlTimer | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2Security4ACLFlowControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2Security4ACLFlowControlReqResult | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2Security4ACLFlowControlIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.6 | IntFlowIndex | RW | |
scalar · IntFlowIndex · read-write · current The index of flow | ||||
| SsleV2Security4ACLFlowControlName | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.7 | OctetName | RW | |
scalar · OctetName · read-write · current The name of flow | ||||
| SsleV2Security4ACLFlowControlSrcIpAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to match against the packet's source IP address. The value of 0.0.0.0 means any(not set) | ||||
| SsleV2Security4ACLFlowControlSrcIpAddrMask | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.9 | IntIpAddrMask | RW | |
scalar · IntIpAddrMask · read-write · current The mask of source IP address The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlDstIpAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to match against the packet's destination IP address. The value of 0.0.0.0 means any(not set) | ||||
| SsleV2Security4ACLFlowControlDstIpAddrMask | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.11 | IntIpAddrMask | RW | |
scalar · IntIpAddrMask · read-write · current The mask of destination IP address The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlProtocolType | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.12 | IntProtocolType | RW | |
scalar · IntProtocolType · read-write · current The type of IP protocol The flat internet protocol is from sleV2QoS4FlowTcpSrcStartPort to sleV2QoS4FlowIcmpCode If the value is tcp(6), From sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlTcpFlag value is available If the value is u¿¡(17), From sleV2QoS4FlowControlUdpSrcStartPort to sleV2QoS4FlowControlUdpDstEndPort value is available If the value is icmp(1), The value of sleV2QoS4FlowControlIcmpType and sleV2QoS4FlowControlIcmpCode is available The value of -1 means any(not set) Otherwise, from sleV2QoS4FlowControlTcpSrcStartPort to sleV2QoS4FlowControlIcmpCode value is not available The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlTcpSrcStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.13 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The start source port in range of source port in TCP packet The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlTcpSrcEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.14 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The end source port in range of source port in TCP packet The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlTcpDstStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.15 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The start destination port in range of source port in TCP packet. The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlTcpDstEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.16 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The end destination port in range of destination port in TCP packet. The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlTcpFlag | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.17 | Bits | RW | |
scalar · Bits · read-write · current The flag in TCP packet
| ||||
| SsleV2Security4ACLFlowControlUdpSrcStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.18 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The start source port in range of source port in UDP packet The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlUdpSrcEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.19 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The end source port in range of source port in UDP packet The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlUdpDstStartPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.20 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The start destination port in range of destination port in UDP packet. The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlUdpDstEndPort | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.21 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The end destination port in range of destination port in UDP packet. The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlIcmpType | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.22 | IntIcmpType | RW | |
scalar · IntIcmpType · read-write · current The type of ICMP message The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlIcmpCode | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.23 | IntIcmpCode | RW | |
scalar · IntIcmpCode · read-write · current The code of ICMP message The value of -1 means any(not set) | ||||
| SsleV2Security4ACLFlowControlHdrlen | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.24 | INTEGER (0 | 1..15) | RW | |
scalar · INTEGER (0 | 1..15) · read-write · current The IP header length The value of 0 means any(not set) | ||||
| SsleV2Security4ACLFlowControlIpFlag | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current The any flag of IP address.
| ||||
| SsleV2SecurityACLFlowControlInetAddrType | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.26 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current IP address type | ||||
| SsleV2SecurityACLFlowControlSrcInetAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.27 | InetAddress | RW | |
scalar · InetAddress · read-write · current The IP address to match against the packet¡¯s source IP address. | ||||
| SsleV2SecurityACLFlowControlDstInetAddr | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.28 | InetAddress | RW | |
scalar · InetAddress · read-write · current The IP address to match against the packet¡¯s destination IP address. | ||||
| SsleV2SecurityACLFlowControlSrcInetAddrLen | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.29 | InetAddressPrefixLength | RW | |
scalar · InetAddressPrefixLength · read-write · current The prefix length of source IP address | ||||
| SsleV2SecurityACLFlowControlDstInetAddrLen | 1.3.6.1.4.1.6296.102.7.2.5.2.1.2.30 | InetAddressPrefixLength | RW | |
scalar · InetAddressPrefixLength · read-write · current The prefix length of destination IP address | ||||
| NsleV2Security4ACLFlowNotification | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3 | |||
| !sleACLFlowCreated | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1 | |||
notification · current Description.
| ||||
| !sleACLFlowChanged | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2 | |||
notification · current Description.
| ||||
| !sleACLFlowDestroyed | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3 | |||
notification · current Description. | ||||
| !sleACLFlowAllDestroyed | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4 | |||
notification · current Description. | ||||
| !sleACLFlowExCreated | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5 | |||
notification · current createACLFlowEx
| ||||
| !sleACLFlowExChanged | 1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6 | |||
notification · current setACLFlowEx
| ||||
| NsleV2Security4ACLFlowClass | 1.3.6.1.4.1.6296.102.7.2.5.2.2 | |||
| TsleV2Security4ACLFlowClassTable | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1 | NA | ||
table · not-accessible · current ACL flow class table. | ||||
| RsleV2Security4ACLFlowClassEntry | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1 | NA | ||
row · not-accessible · current key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowClassIndex | ||||
| CsleV2Security4ACLFlowClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.1 | IntClassIndex | RO | |
column · IntClassIndex · read-only · current The index of the class for the flow | ||||
| CsleV2Security4ACLFlowClassID | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.2 | IntClassIndex | RO | |
column · IntClassIndex · read-only · current The identifier of the class | ||||
| CsleV2Security4ACLFlowClassName | 1.3.6.1.4.1.6296.102.7.2.5.2.2.1.1.3 | OctetName | RO | |
column · OctetName · read-only · current The name of the class | ||||
| NsleV2Security4ACLFlowPolicy | 1.3.6.1.4.1.6296.102.7.2.5.2.3 | |||
| TsleV2QoS4ACLFlowPolicyTable | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1 | NA | ||
table · not-accessible · current ACL flow policy table. | ||||
| RsleV2QoS4ACLFlowPolicyEntry | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1 | NA | ||
row · not-accessible · current key: sleV2Security4ACLFlowIndex, sleV2Security4ACLFlowPolicyIndex | ||||
| CsleV2Security4ACLFlowPolicyIndex | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.1 | IntPolicyIndex | RO | |
column · IntPolicyIndex · read-only · current The index of the policy for the flow | ||||
| CsleV2Security4ACLFlowPolicyID | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.2 | IntPolicyIndex | RO | |
column · IntPolicyIndex · read-only · current The identifier of the policy | ||||
| CsleV2Security4ACLFlowPolicyName | 1.3.6.1.4.1.6296.102.7.2.5.2.3.1.1.3 | OctetName | RO | |
column · OctetName · read-only · current The name of the policy | ||||
| NsleV2Security4ACLClass | 1.3.6.1.4.1.6296.102.7.2.5.3 | |||
| NsleV2Security4ACLClassInfo | 1.3.6.1.4.1.6296.102.7.2.5.3.1 | |||
| TsleV2Security4ACLClassTable | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1 | NA | ||
table · not-accessible · current ACL class table. | ||||
| RsleV2Security4ACLClassEntry | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1 | NA | ||
| CsleV2Security4ACLClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.1 | IntClassIndex | RO | |
column · IntClassIndex · read-only · current The index of class | ||||
| CsleV2Security4ACLClassName | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.2 | OctetName | RO | |
column · OctetName · read-only · current The name of class | ||||
| CsleV2Security4ACLClassFlowCnt | 1.3.6.1.4.1.6296.102.7.2.5.3.1.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The counter of flow in class | ||||
| NsleV2Security4ACLClassControl | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2 | |||
| SsleV2Security4ACLClassControlRequest | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2Security4ACLClassControlStatus | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2Security4ACLClassControlTimer | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2Security4ACLClassControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2Security4ACLClassControlReqResult | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2Security4ACLClassControlIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.6 | IntClassIndex | RW | |
scalar · IntClassIndex · read-write · current The index of class | ||||
| SsleV2Security4ACLClassControlName | 1.3.6.1.4.1.6296.102.7.2.5.3.1.2.7 | OctetName | RW | |
scalar · OctetName · read-write · current The name of class | ||||
| NsleV2Security4ACLClassNotification | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3 | |||
| !sleACLClassCreated | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1 | |||
notification · current Description. | ||||
| !sleACLClassDestroyed | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2 | |||
notification · current Description. | ||||
| !sleACLClassAllDestroyed | 1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3 | |||
notification · current Description. | ||||
| NsleV2Security4ACLClassFlow | 1.3.6.1.4.1.6296.102.7.2.5.3.2 | |||
| TsleV2Security4ACLClassFlowTable | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleV2Security4ACLClassFlowEntry | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleV2Security4ACLClassFlowIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.1 | IntFlowIndex | RO | |
column · IntFlowIndex · read-only · current The index of flow in class | ||||
| CsleV2Security4ACLClassFlowID | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.2 | IntFlowIndex | RO | |
column · IntFlowIndex · read-only · current The identifier of flow | ||||
| CsleV2Security4ACLClassFlowName | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.3 | OctetName | RO | |
column · OctetName · read-only · current The name of the flow | ||||
| CsleV2Security4ACLClassFlowClassName | 1.3.6.1.4.1.6296.102.7.2.5.3.2.1.1.4 | OctetName | RO | |
column · OctetName · read-only · current The class name of the Classflow | ||||
| NsleV2Security4ACLClassFlowControl | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2 | |||
| SsleV2Security4ACLClassFlowControlRequest | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2Security4ACLClassFlowControlStatus | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2Security4ACLClassFlowControlTimer | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2Security4ACLClassFlowControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2Security4ACLClassFlowControlReqResult | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2Security4ACLClassFlowControlClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.6 | IntClassIndex | RW | |
scalar · IntClassIndex · read-write · current The index of class | ||||
| SsleV2Security4ACLClassFlowControlFlowIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.7 | IntFlowIndex | RW | |
scalar · IntFlowIndex · read-write · current The index of flow in this class | ||||
| SsleV2Security4ACLClassFlowControlFlowID | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.8 | IntFlowIndex | RW | |
scalar · IntFlowIndex · read-write · current The index of flow Refer to sleV2QoS4FlowIndex | ||||
| SsleV2Security4ACLClassFlowControlClassName | 1.3.6.1.4.1.6296.102.7.2.5.3.2.2.9 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The class name of classFlow | ||||
| NsleV2Security4ACLClassFlowNotification | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3 | |||
| !sleACLClassFlowAdded | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1 | |||
| !sleACLClassFlowDeleted | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2 | |||
notification · current Description. | ||||
| !sleACLClassFlowAllDeleted | 1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3 | |||
notification · current Description. | ||||
| NsleV2Security4ACLClassPolicy | 1.3.6.1.4.1.6296.102.7.2.5.3.3 | |||
| TsleV2Security4ACLClassPolicyTable | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleV2Security4ACLClassPolicyEntry | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleV2Security4ACLClassPolicyIndex | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.1 | IntPolicyIndex | RO | |
column · IntPolicyIndex · read-only · current The index of the policy for the class | ||||
| CsleV2Security4ACLClassPolicyID | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.2 | IntPolicyIndex | RO | |
column · IntPolicyIndex · read-only · current The identifier of the policy | ||||
| CsleV2Security4ACLClassPolicyName | 1.3.6.1.4.1.6296.102.7.2.5.3.3.1.1.3 | OctetName | RO | |
column · OctetName · read-only · current The name of the policy | ||||
| NsleV2Security4ACLPolicy | 1.3.6.1.4.1.6296.102.7.2.5.4 | |||
| NsleV2Security4ACLPolicyInfo | 1.3.6.1.4.1.6296.102.7.2.5.4.1 | |||
| TsleV2Security4ACLPolicyTable | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1 | NA | ||
table · not-accessible · current ACL policy table. | ||||
| RsleV2Security4ACLPolicyEntry | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1 | NA | ||
| CsleV2Security4ACLPolicyIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.1 | IntPolicyIndex | RO | |
column · IntPolicyIndex · read-only · current The index of policy | ||||
| CsleV2Security4ACLPolicyName | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.2 | OctetName | RO | |
column · OctetName · read-only · current The name of policy | ||||
| CsleV2Security4ACLPolicyFlowCnt | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The counter of flow that was included to policy | ||||
| CsleV2Security4ACLPolicyClassCnt | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The counter of class that was included to policy | ||||
| CsleV2Security4ACLPolicyPriority | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The priority of the policy low : default value
| ||||
| CsleV2Security4ACLPolicyMatchFlag | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.6 | IntPermit | RO | |
column · IntPermit · read-only · current The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | ||||
| CsleV2Security4ACLPolicyNomatchFlag | 1.3.6.1.4.1.6296.102.7.2.5.4.1.1.1.7 | IntPermit | RO | |
column · IntPermit · read-only · current The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | ||||
| NsleV2Security4ACLPolicyControl | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2 | |||
| SsleV2Security4ACLPolicyControlRequest | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2Security4ACLPolicyControlStatus | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2Security4ACLPolicyControlTimer | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2Security4ACLPolicyControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2Security4ACLPolicyControlReqResult | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2Security4ACLPolicyControlIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.6 | IntPolicyIndex | RW | |
scalar · IntPolicyIndex · read-write · current The index of policy | ||||
| SsleV2Security4ACLPolicyControlName | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.7 | OctetName | RW | |
scalar · OctetName · read-write · current The name of policy | ||||
| SsleV2Security4ACLPolicyControlPriority | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.8 | IntRulePriority | RW | |
scalar · IntRulePriority · read-write · current The priority of the policy low : default | ||||
| SsleV2Security4ACLPolicyControlMatchFlag | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.9 | IntPermit | RW | |
scalar · IntPermit · read-write · current The action to be apply for matched packets. bit 0: deny the matched packets bit 1: mirror the matched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | ||||
| SsleV2Security4ACLPolicyControlNomatchFlag | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.10 | IntPermit | RW | |
scalar · IntPermit · read-write · current The action to be apply for matched packets. bit 0: deny the nomatched packets bit 1: mirror the nomatched packets bit 2: copy to CPU bit 3: set 802.1p value to ToS precedence bit 4: set ToS precedence to 802.1p value bit 5 : set 802.1p value from flow bit 6 : set TaoS precedence from flow | ||||
| SsleV2Security4ACLPolicyControlFlowID | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.11 | Integer32 | RW | |
scalar · Integer32 · read-write · current The index of flow | ||||
| SsleV2Security4ACLPolicyControlClassID | 1.3.6.1.4.1.6296.102.7.2.5.4.1.2.12 | Integer32 | RW | |
scalar · Integer32 · read-write · current The index of class | ||||
| NsleV2Security4ACLPolicyNotification | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3 | |||
| !sleACLPolicyCreated | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1 | |||
| !sleACLPolicyInfoChanged | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2 | |||
notification · current Description. | ||||
| !sleACLPolicyMatchActionChanged | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3 | |||
notification · current Description. | ||||
| !sleACLPolicyNomatchActionChanged | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4 | |||
notification · current Description. | ||||
| !sleACLPolicyDestroyed | 1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5 | |||
notification · current Description. | ||||
| NsleV2Security4ACLPolicyFlowClass | 1.3.6.1.4.1.6296.102.7.2.5.4.2 | |||
| TsleV2Security4ACLPolicyFlowClassTable | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1 | NA | ||
table · not-accessible · current ACL policy flow class table. | ||||
| RsleV2Security4ACLPolicyFlowClassEntry | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1 | NA | ||
row · not-accessible · current key: sleV2Security4ACLPolicyIndex, sleV2Security4ACLPolicyFlowClassIndex | ||||
| CsleV2Security4ACLPolicyFlowClassIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.1 | IntFlowIndex | RO | |
column · IntFlowIndex · read-only · current The index of flow or class in policy | ||||
| CsleV2Security4ACLPolicyFlowClassType | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.2 | IntFlowOrClass | RO | |
column · IntFlowOrClass · read-only · current The flag about flow or class | ||||
| CsleV2Security4ACLPolicyFlowClassID | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.3 | IntFlowIndex | RO | |
column · IntFlowIndex · read-only · current The identifier of class or flow | ||||
| CsleV2Security4ACLPolicyFlowClassName | 1.3.6.1.4.1.6296.102.7.2.5.4.2.1.1.4 | OctetName | RO | |
column · OctetName · read-only · current The name of class or flow | ||||
| NsleV2Security4ACLPolicyFlowClassControl | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2 | |||
| SsleV2Security4ACLPolicyFlowClassControlRequest | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2Security4ACLPolicyFlowClassControlStatus | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.2 | SleControlStatusType | RW | |
scalar · SleControlStatusType · read-write · current The status of user command | ||||
| SsleV2Security4ACLPolicyFlowClassControlTimer | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2Security4ACLPolicyFlowClassControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.4 | TimeTicks | RW | |
scalar · TimeTicks · read-write · current The time stamp of the last command(end of command) | ||||
| SsleV2Security4ACLPolicyFlowClassControlReqResult | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.5 | SleControlRequestResultType | RW | |
scalar · SleControlRequestResultType · read-write · current The result of the last user command | ||||
| SsleV2Security4ACLPolicyFlowClassControlPolicyIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.6 | IntPolicyIndex | RW | |
scalar · IntPolicyIndex · read-write · current The index of Policy | ||||
| SsleV2Security4ACLPolicyFlowClassControlIndex | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.7 | IntFlowIndex | RW | |
scalar · IntFlowIndex · read-write · current The index of flow or class in this policy | ||||
| SsleV2Security4ACLPolicyFlowClassControlType | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.8 | IntFlowOrClass | RW | |
scalar · IntFlowOrClass · read-write · current The type of flow or class | ||||
| SsleV2Security4ACLPolicyFlowClassControlFlowID | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.9 | IntFlowIndex | RW | |
scalar · IntFlowIndex · read-write · current The index of flow Available according to sleV2QoS4PolicyFlowClassControlType. | ||||
| SsleV2Security4ACLPolicyFlowClassControlClassID | 1.3.6.1.4.1.6296.102.7.2.5.4.2.2.10 | IntClassIndex | RW | |
scalar · IntClassIndex · read-write · current The index of class Available according to sleV2QoS4PolicyFlowClassControlType. | ||||
| NsleV2Security4ACLPolicyFlowClassNotification | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3 | |||
| !sleACLPolicyFlowAdded | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1 | |||
| !sleACLPolicyFlowDeleted | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2 | |||
| !sleACLPolicyAllFlowDeleted | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3 | |||
| !sleACLPolicyAllClassDeleted | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4 | |||
| !sleACLPolicyAllFlowClassDeleted | 1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5 | |||
| NsleV2Security4ACLGroup | 1.3.6.1.4.1.6296.102.7.2.5.5 | |||
| NsleV2Security4ACLGroupIf | 1.3.6.1.4.1.6296.102.7.2.5.5.1 | |||
| TsleV2Security4ACLGroupIfTable | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleV2Security4ACLGroupIfEntry | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleV2Security4ACLGroupIfindex | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current interface index | ||||
| CsleV2Security4ACLGroupIfType | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The access-list type
| ||||
| CsleV2Security4ACLGroupIfName | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The access-list name | ||||
| CsleV2Security4ACLGroupIfPriority | 1.3.6.1.4.1.6296.102.7.2.5.5.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The policy priority
| ||||
| NsleV2Security4ACLGroupIfControl | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2 | |||
| SsleV2Security4ACLGroupIfControlRequest | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2Security4ACLGroupIfControlStatus | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.2 | SleControlStatusType | RW | |
scalar · SleControlStatusType · read-write · current The status of user command | ||||
| SsleV2Security4ACLGroupIfControlTimer | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2Security4ACLGroupIfControlReqResult | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.4 | TimeTicks | RW | |
scalar · TimeTicks · read-write · current The time stamp of the last command(end of command) | ||||
| SsleV2Security4ACLGroupIfControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.5 | SleControlRequestResultType | RW | |
scalar · SleControlRequestResultType · read-write · current The result of the last user command | ||||
| SsleV2Security4ACLGroupIfConrolIndex | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current interface index | ||||
| SsleV2Security4ACLGroupIfControlType | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The access-list type
| ||||
| SsleV2Security4ACLGroupIfControlName | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.8 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The access-list name | ||||
| SsleV2Security4ACLGroupIfControlPriority | 1.3.6.1.4.1.6296.102.7.2.5.5.1.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Integer 1: low(1) 2: medium(2) 3: high(3) 4: highest(4) The policy priority
| ||||
| NsleV2SecurityACLGroupIfNotification | 1.3.6.1.4.1.6296.102.7.2.5.5.1.3 | |||
| !sleV2Security4ACLGroupIfProfileAdd | 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1 | |||
notification · current setSecurityACLGroupIfProfile | ||||
| !sleV2Security4ACLGroupIfProfileDelete | 1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2 | |||
notification · current delSecurityACLGroupIfProfile | ||||
| NsleV2SecuritySACL | 1.3.6.1.4.1.6296.102.7.2.6 | |||
| TsleV2SecuritySACLTable | 1.3.6.1.4.1.6296.102.7.2.6.1 | NA | ||
table · not-accessible · current ACL table. | ||||
| RsleV2SecuritySACLEntry | 1.3.6.1.4.1.6296.102.7.2.6.1.1 | NA | ||
| CsleV2SecuritySACLName | 1.3.6.1.4.1.6296.102.7.2.6.1.1.1 | OctetName | RO | |
column · OctetName · read-only · current Name of this ACL rule | ||||
| CsleV2SecuritySACLSrcIpaddr | 1.3.6.1.4.1.6296.102.7.2.6.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to match against the packet¡¯s source IP address | ||||
| CsleV2SecuritySACLSrcPrefixLength | 1.3.6.1.4.1.6296.102.7.2.6.1.1.3 | Integer32 (0..32) | RO | |
column · Integer32 (0..32) · read-only · current Subnet mask. | ||||
| CsleV2SecuritySACLDstIpAddr | 1.3.6.1.4.1.6296.102.7.2.6.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to match against the packet¡¯s destination IP address | ||||
| CsleV2SecuritySACLDstPrefixLength | 1.3.6.1.4.1.6296.102.7.2.6.1.1.5 | Integer32 (0..32) | RO | |
column · Integer32 (0..32) · read-only · current Subnet mask. | ||||
| CsleV2SecuritySACLProtocolType | 1.3.6.1.4.1.6296.102.7.2.6.1.1.6 | IntProtocolType | RO | |
column · IntProtocolType · read-only · current The type of IP protocol The flat internet protocol is from sleV2SecuritySACLTcpflag to sleV2SecuritySACLIcmpCode If the value is tcp(6) or udp(17), From sleV2SecuritySACLTcpflag to sleV2SecuritySACLDstL4Port value is available If the value is icmp(1), The value of sleV2SecuritySACLIcmpType and sleV2SecuritySACLIcmpCode is available The value of -1 means any(not set) | ||||
| CsleV2SecuritySACLTcpflag | 1.3.6.1.4.1.6296.102.7.2.6.1.1.7 | Bits | RO | |
column · Bits · read-only · current TCP flag
| ||||
| CsleV2SecuritySACLSrcL4Port | 1.3.6.1.4.1.6296.102.7.2.6.1.1.8 | IntL4Port | RO | |
column · IntL4Port · read-only · current The source service port number (only valid for TCP or UDP packet).. | ||||
| CsleV2SecuritySACLDstL4Port | 1.3.6.1.4.1.6296.102.7.2.6.1.1.9 | IntL4Port | RO | |
column · IntL4Port · read-only · current The destination service port number (only valid for TCP or UDP packet). | ||||
| CsleV2SecuritySACLIcmpType | 1.3.6.1.4.1.6296.102.7.2.6.1.1.10 | IntProtocolType | RO | |
column · IntProtocolType · read-only · current The Type of ICMP message The value of -1 means any(not set) | ||||
| CsleV2SecuritySACLIcmpCode | 1.3.6.1.4.1.6296.102.7.2.6.1.1.11 | IntProtocolType | RO | |
column · IntProtocolType · read-only · current The code of ICMP message The value of -1 means any(not set) | ||||
| CsleV2SecuritySACLPriority | 1.3.6.1.4.1.6296.102.7.2.6.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The type of ICMP message The value of -1 means any(not set)
| ||||
| CsleV2SecuritySACLMatchAction | 1.3.6.1.4.1.6296.102.7.2.6.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Action for packets that match against this ACL rule.
| ||||
| CsleV2SecuritySACLNomatchAction | 1.3.6.1.4.1.6296.102.7.2.6.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Action for packets that don¡¯t match against this ACL rule.
| ||||
| NsleV2SecuritySACLControl | 1.3.6.1.4.1.6296.102.7.2.6.2 | |||
| SsleV2SecuritySACLControlRequest | 1.3.6.1.4.1.6296.102.7.2.6.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2SecuritySACLControlStatus | 1.3.6.1.4.1.6296.102.7.2.6.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2SecuritySACLControlTimer | 1.3.6.1.4.1.6296.102.7.2.6.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2SecuritySACLControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.6.2.4 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2SecuritySACLControlReqResult | 1.3.6.1.4.1.6296.102.7.2.6.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2SecuritySACLControlName | 1.3.6.1.4.1.6296.102.7.2.6.2.6 | OctetName | RW | |
scalar · OctetName · read-write · current Name of this ACL rule | ||||
| SsleV2SecuritySACLControlSrcIpaddr | 1.3.6.1.4.1.6296.102.7.2.6.2.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to match against the packet¡¯s source IP address | ||||
| SsleV2SecuritySACLControlSrcPrefixLength | 1.3.6.1.4.1.6296.102.7.2.6.2.8 | IntIpAddrMask | RW | |
scalar · IntIpAddrMask · read-write · current Subnet mask. | ||||
| SsleV2SecuritySACLControlDstIpaddr | 1.3.6.1.4.1.6296.102.7.2.6.2.9 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to match against the packet¡¯s destination IP address | ||||
| SsleV2SecuritySACLControlDstPrefixLength | 1.3.6.1.4.1.6296.102.7.2.6.2.10 | IntIpAddrMask | RW | |
scalar · IntIpAddrMask · read-write · current Subnet mask. | ||||
| SsleV2SecuritySACLControlProtocolType | 1.3.6.1.4.1.6296.102.7.2.6.2.11 | IntProtocolType | RW | |
scalar · IntProtocolType · read-write · current The IP protocol type value | ||||
| SsleV2SecuritySACLControlTcpflag | 1.3.6.1.4.1.6296.102.7.2.6.2.12 | Bits | RW | |
scalar · Bits · read-write · current TCP flag
| ||||
| SsleV2SecuritySACLControlSrcL4Port | 1.3.6.1.4.1.6296.102.7.2.6.2.13 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The source service port number (only valid for TCP or UDP packet).. | ||||
| SsleV2SecuritySACLControlDstL4Port | 1.3.6.1.4.1.6296.102.7.2.6.2.14 | IntL4Port | RW | |
scalar · IntL4Port · read-write · current The destination service port number (only valid for TCP or UDP packet). | ||||
| SsleV2SecuritySACLControlIcmpType | 1.3.6.1.4.1.6296.102.7.2.6.2.15 | IntProtocolType | RW | |
scalar · IntProtocolType · read-write · current The type of ICMP message The value of -1 means any(not set) | ||||
| SsleV2SecuritySACLControlIcmpCode | 1.3.6.1.4.1.6296.102.7.2.6.2.16 | IntProtocolType | RW | |
scalar · IntProtocolType · read-write · current The code of ICMP message The value of -1 means any(not set) | ||||
| SsleV2SecuritySACLControlPriority | 1.3.6.1.4.1.6296.102.7.2.6.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Priority of this ACL rule)
| ||||
| SsleV2SecuritySACLControlMatchAction | 1.3.6.1.4.1.6296.102.7.2.6.2.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for packets that match against this ACL rule.
| ||||
| SsleV2SecuritySACLControlNomatchAction | 1.3.6.1.4.1.6296.102.7.2.6.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action for packets that don¡¯t match against this ACL rule.
| ||||
| NsleV2SecuritySACLNotification | 1.3.6.1.4.1.6296.102.7.2.6.3 | |||
| !sleSACLCreated | 1.3.6.1.4.1.6296.102.7.2.6.3.1 | |||
notification · current Description.
| ||||
| !sleSACLDestroyed | 1.3.6.1.4.1.6296.102.7.2.6.3.2 | |||
notification · current Description. | ||||
| !sleSACLAllDestroyed | 1.3.6.1.4.1.6296.102.7.2.6.3.3 | |||
notification · current Description. | ||||
| NsleV2SecurityACLStatistics | 1.3.6.1.4.1.6296.102.7.2.7 | |||
| NsleV2SecurityACLStatisticsBase | 1.3.6.1.4.1.6296.102.7.2.7.1 | |||
| NsleV2SecurityACLStatisticsBaseInfo | 1.3.6.1.4.1.6296.102.7.2.7.1.1 | |||
| SsleV2SecurityACLStatisticsSyslogStatus | 1.3.6.1.4.1.6296.102.7.2.7.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current ACL statistics syslog status
| ||||
| NsleV2SecurityACLStatisticsBaseControl | 1.3.6.1.4.1.6296.102.7.2.7.1.2 | |||
| SsleV2SecurityACLStatisticsBaseControlRequest | 1.3.6.1.4.1.6296.102.7.2.7.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2SecurityACLStatisticsBaseControlStatus | 1.3.6.1.4.1.6296.102.7.2.7.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2SecurityACLStatisticsBaseControlTimer | 1.3.6.1.4.1.6296.102.7.2.7.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2SecurityACLStatisticsBaseControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.7.1.2.4 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2SecurityACLStatisticsBaseControlReqResult | 1.3.6.1.4.1.6296.102.7.2.7.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2SecurityACLStatisticsBaseControlSyslogMode | 1.3.6.1.4.1.6296.102.7.2.7.1.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ACL statistics syslog mode
| ||||
| NsleV2SecurityACLStatisticsBaseNotification | 1.3.6.1.4.1.6296.102.7.2.7.1.3 | |||
| !sleV2SecurityACLStatisticsSyslogModeChanged | 1.3.6.1.4.1.6296.102.7.2.7.1.3.1 | |||
notification · current Description. | ||||
| NsleV2SecurityACLStatisticsPacketHistory | 1.3.6.1.4.1.6296.102.7.2.7.2 | |||
| TsleV2SecurityACLPacketCountTable | 1.3.6.1.4.1.6296.102.7.2.7.2.1 | NA | ||
table · not-accessible · current ACL packet count table. | ||||
| RsleV2SecurityACLPacketCountEntry | 1.3.6.1.4.1.6296.102.7.2.7.2.1.1 | NA | ||
| CsleV2SecurityACLTotalPacket | 1.3.6.1.4.1.6296.102.7.2.7.2.1.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current ACL total packet | ||||
| TsleV2SecurityACLSrcHistoryTable | 1.3.6.1.4.1.6296.102.7.2.7.2.2 | NA | ||
table · not-accessible · current ACL source history table. | ||||
| RsleV2SecurityACLSrcHistoryEntry | 1.3.6.1.4.1.6296.102.7.2.7.2.2.1 | NA | ||
row · not-accessible · current key: sleV2SecuritySACLName, sleV2SecurityACLSrcHistoryIndex | ||||
| CsleV2SecurityACLSrcHistoryIndex | 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.1 | Integer32 (1..1024) | RO | |
column · Integer32 (1..1024) · read-only · current The ACL index. | ||||
| CsleV2SecurityACLSrcHistoryIpAddr | 1.3.6.1.4.1.6296.102.7.2.7.2.2.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The ACl IP address | ||||
| NsleV2SecurityACLStatisticsControl | 1.3.6.1.4.1.6296.102.7.2.7.2.3 | |||
| SsleV2SecurityACLStatisticsControlRequest | 1.3.6.1.4.1.6296.102.7.2.7.2.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2SecurityACLStatisticsControlStatus | 1.3.6.1.4.1.6296.102.7.2.7.2.3.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2SecurityACLStatisticsControlTimer | 1.3.6.1.4.1.6296.102.7.2.7.2.3.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2SecurityACLStatisticsControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.7.2.3.4 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2SecurityACLStatisticsControlReqResult | 1.3.6.1.4.1.6296.102.7.2.7.2.3.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2SecurityACLStatisticsControlName | 1.3.6.1.4.1.6296.102.7.2.7.2.3.6 | OctetName | RW | |
scalar · OctetName · read-write · current The ACL statistics name | ||||
| NsleV2SecurityACLStatisticsNotification | 1.3.6.1.4.1.6296.102.7.2.7.2.4 | |||
| !sleV2SecurityACLStatisticsCleared | 1.3.6.1.4.1.6296.102.7.2.7.2.4.1 | |||
notification · current Description. | ||||
| NsleV2CpuPacketFilter | 1.3.6.1.4.1.6296.102.7.2.8 | |||
| TsleV2CpuPacketFilterTable | 1.3.6.1.4.1.6296.102.7.2.8.1 | NA | ||
table · not-accessible · current cpu packet filter table. | ||||
| RsleV2CpuPacketFilterEntry | 1.3.6.1.4.1.6296.102.7.2.8.1.1 | NA | ||
| CsleV2CpuPacketFilterIndex | 1.3.6.1.4.1.6296.102.7.2.8.1.1.1 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The index of cpu packet filter | ||||
| CsleV2CpuPacketFilterName | 1.3.6.1.4.1.6296.102.7.2.8.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The name of cpu packet filter | ||||
| CsleV2CpuPacketFilterCreationTime | 1.3.6.1.4.1.6296.102.7.2.8.1.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The creation time. (unit : sec) | ||||
| CsleV2CpuPacketFilterElapsedtimeAfterClear | 1.3.6.1.4.1.6296.102.7.2.8.1.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The elapsed time after clear (unit : sec) | ||||
| CsleV2CpuPacketFilterStage | 1.3.6.1.4.1.6296.102.7.2.8.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The stage of cpu packet filter.
| ||||
| CsleV2CpuPacketFilterPriority | 1.3.6.1.4.1.6296.102.7.2.8.1.1.6 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The priority of cpu packet filter. | ||||
| CsleV2CpuPacketFilterAction | 1.3.6.1.4.1.6296.102.7.2.8.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove
| ||||
| CsleV2CpuPacketFilterActionRateLimit | 1.3.6.1.4.1.6296.102.7.2.8.1.1.8 | Integer32 (1..100) | RO | |
column · Integer32 (1..100) · read-only · current The allowed-packet count per second. | ||||
| CsleV2CpuPacketFilterActionBurstSize | 1.3.6.1.4.1.6296.102.7.2.8.1.1.9 | Integer32 (1..100) | RO | |
column · Integer32 (1..100) · read-only · current The burst-allowed-packet count. | ||||
| CsleV2CpuPacketFilterActionTpid | 1.3.6.1.4.1.6296.102.7.2.8.1.1.10 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The Action TPID The value 65535(0xffff) means any. | ||||
| CsleV2CpuPacketFilterActionPcp | 1.3.6.1.4.1.6296.102.7.2.8.1.1.11 | Integer32 (0..7 | 255) | RO | |
column · Integer32 (0..7 | 255) · read-only · current The Action PCP. The value 255(0xff) means any. | ||||
| CsleV2CpuPacketFilterActionVid | 1.3.6.1.4.1.6296.102.7.2.8.1.1.12 | Integer32 (0 | 1..4094 | 65535) | RO | |
column · Integer32 (0 | 1..4094 | 65535) · read-only · current The Action VID The value 65535(0xffff) means any. | ||||
| CsleV2CpuPacketFilterActionTagPosition | 1.3.6.1.4.1.6296.102.7.2.8.1.1.13 | Integer32 (0 | 1..8) | RO | |
column · Integer32 (0 | 1..8) · read-only · current The Action tag position. 1 s-vlan 2 c-vlan | ||||
| TsleV2CpuPacketFilterMatchTable | 1.3.6.1.4.1.6296.102.7.2.8.2 | NA | ||
table · not-accessible · current cpu packet filter match table. | ||||
| RsleV2CpuPacketFilterMatchEntry | 1.3.6.1.4.1.6296.102.7.2.8.2.1 | NA | ||
row · not-accessible · current key: sleV2CpuPacketFilterIndex, sleV2CpuPacketFilterMatchIndex | ||||
| CsleV2CpuPacketFilterMatchIndex | 1.3.6.1.4.1.6296.102.7.2.8.2.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The match entry Index | ||||
| CsleV2CpuPacketFilterMatchType | 1.3.6.1.4.1.6296.102.7.2.8.2.1.2 | Bits | RO | |
column · Bits · read-only · current The match classifiter type.
| ||||
| CsleV2CpuPacketFilterMatchCos | 1.3.6.1.4.1.6296.102.7.2.8.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The matched CoS Queue. | ||||
| CsleV2CpuPacketFilterMatchPort | 1.3.6.1.4.1.6296.102.7.2.8.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The matched port index. | ||||
| CsleV2CpuPacketFilterMatchVidmap | 1.3.6.1.4.1.6296.102.7.2.8.2.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The matched VID. | ||||
| CsleV2CpuPacketFilterMatchTagPosition | 1.3.6.1.4.1.6296.102.7.2.8.2.1.6 | Integer32 (0 | 1..8) | RO | |
column · Integer32 (0 | 1..8) · read-only · current The matched tag position. | ||||
| CsleV2CpuPacketFilterMatchTpid | 1.3.6.1.4.1.6296.102.7.2.8.2.1.7 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The matched TPID. | ||||
| CsleV2CpuPacketFilterMatchPcp | 1.3.6.1.4.1.6296.102.7.2.8.2.1.8 | Integer32 (0..7 | 255) | RO | |
column · Integer32 (0..7 | 255) · read-only · current The matched PCP | ||||
| CsleV2CpuPacketFilterMatchVid | 1.3.6.1.4.1.6296.102.7.2.8.2.1.9 | Integer32 (0 | 1..4094 | 65535) | RO | |
column · Integer32 (0 | 1..4094 | 65535) · read-only · current The matched VID | ||||
| CsleV2CpuPacketFilterMatchOffset | 1.3.6.1.4.1.6296.102.7.2.8.2.1.10 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current The matched offset | ||||
| CsleV2CpuPacketFilterMatchLength | 1.3.6.1.4.1.6296.102.7.2.8.2.1.11 | Integer32 (1..16) | RO | |
column · Integer32 (1..16) · read-only · current The matched Length | ||||
| CsleV2CpuPacketFilterMatchData | 1.3.6.1.4.1.6296.102.7.2.8.2.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The matched data. (HEX string) | ||||
| CsleV2CpuPacketFilterMatchMask | 1.3.6.1.4.1.6296.102.7.2.8.2.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The matched mask. (HEX string) | ||||
| CsleV2CpuPacketFilterMatchDesc | 1.3.6.1.4.1.6296.102.7.2.8.2.1.14 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The matched Description | ||||
| NsleV2CpuPacketFilterControl | 1.3.6.1.4.1.6296.102.7.2.8.3 | |||
| SsleV2CpuPacketFilterControlRequest | 1.3.6.1.4.1.6296.102.7.2.8.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2CpuPacketFilterControlStatus | 1.3.6.1.4.1.6296.102.7.2.8.3.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2CpuPacketFilterControlTimer | 1.3.6.1.4.1.6296.102.7.2.8.3.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2CpuPacketFilterControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.8.3.4 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2CpuPacketFilterControlReqResult | 1.3.6.1.4.1.6296.102.7.2.8.3.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2CpuPacketFilterControlIndex | 1.3.6.1.4.1.6296.102.7.2.8.3.6 | Integer32 (1..2147483647) | RW | |
scalar · Integer32 (1..2147483647) · read-write · current The match entry Index | ||||
| SsleV2CpuPacketFilterControlName | 1.3.6.1.4.1.6296.102.7.2.8.3.7 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Cpu packet filter name. | ||||
| SsleV2CpuPacketFilterControlStage | 1.3.6.1.4.1.6296.102.7.2.8.3.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The stage of cpu packet filter.
| ||||
| SsleV2CpuPacketFilterControlPriority | 1.3.6.1.4.1.6296.102.7.2.8.3.9 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The priority of cpu packet filter. | ||||
| SsleV2CpuPacketFilterControlAction | 1.3.6.1.4.1.6296.102.7.2.8.3.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The action to matched packet. Dot1q -> replace dot1qAttach -> add dot1qDettach -> remove
| ||||
| SsleV2CpuPacketFilterControlActionRateLimit | 1.3.6.1.4.1.6296.102.7.2.8.3.11 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current The allowed-packet count per second. | ||||
| SsleV2CpuPacketFilterControlActionBurstSize | 1.3.6.1.4.1.6296.102.7.2.8.3.12 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current The burst-allowed-packet count. | ||||
| SsleV2CpuPacketFilterControlActionTpid | 1.3.6.1.4.1.6296.102.7.2.8.3.13 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The Action TPID The value 65535(0xffff) means any. | ||||
| SsleV2CpuPacketFilterControlActionPcp | 1.3.6.1.4.1.6296.102.7.2.8.3.14 | Integer32 (0..7 | 255) | RW | |
scalar · Integer32 (0..7 | 255) · read-write · current The Action PCP. The value 255(0xff) means any. | ||||
| SsleV2CpuPacketFilterControlActionVid | 1.3.6.1.4.1.6296.102.7.2.8.3.15 | Integer32 (0 | 1..4094 | 65535) | RW | |
scalar · Integer32 (0 | 1..4094 | 65535) · read-write · current The Action VID The value 65535(0xffff) means any. | ||||
| SsleV2CpuPacketFilterControlActionTagPosition | 1.3.6.1.4.1.6296.102.7.2.8.3.16 | Integer32 (0 | 1..8) | RW | |
scalar · Integer32 (0 | 1..8) · read-write · current The Action tag position. 1: S-vlan 2: C-vlan M2200 uses only 1 and 2. | ||||
| SsleV2CpuPacketFilterControlMatchType | 1.3.6.1.4.1.6296.102.7.2.8.3.17 | Bits | RW | |
scalar · Bits · read-write · current The match classifiter type.
| ||||
| SsleV2CpuPacketFilterControlMatchCos | 1.3.6.1.4.1.6296.102.7.2.8.3.18 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The matched CoS Queue. M2200 doesn't use | ||||
| SsleV2CpuPacketFilterControlMatchPort | 1.3.6.1.4.1.6296.102.7.2.8.3.19 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The matched port index. | ||||
| SsleV2CpuPacketFilterControlMatchVidmap | 1.3.6.1.4.1.6296.102.7.2.8.3.20 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The matched VID M2200 doesn't use | ||||
| SsleV2CpuPacketFilterControlMatchTagPosition | 1.3.6.1.4.1.6296.102.7.2.8.3.21 | Integer32 (0 | 1..8) | RW | |
scalar · Integer32 (0 | 1..8) · read-write · current The matched tag position M2200 doesn't use | ||||
| SsleV2CpuPacketFilterControlMatchTpid | 1.3.6.1.4.1.6296.102.7.2.8.3.22 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current The matched TPID. | ||||
| SsleV2CpuPacketFilterControlMatchPcp | 1.3.6.1.4.1.6296.102.7.2.8.3.23 | Integer32 (0..7 | 255) | RW | |
scalar · Integer32 (0..7 | 255) · read-write · current The matched PCP | ||||
| SsleV2CpuPacketFilterControlMatchVid | 1.3.6.1.4.1.6296.102.7.2.8.3.24 | Integer32 (0 | 1..4094 | 65535) | RW | |
scalar · Integer32 (0 | 1..4094 | 65535) · read-write · current The matched VID | ||||
| SsleV2CpuPacketFilterControlMatchOffset | 1.3.6.1.4.1.6296.102.7.2.8.3.25 | Integer32 (0..127) | RW | |
scalar · Integer32 (0..127) · read-write · current The matched offset | ||||
| SsleV2CpuPacketFilterControlMatchLength | 1.3.6.1.4.1.6296.102.7.2.8.3.26 | Integer32 (1..16) | RW | |
scalar · Integer32 (1..16) · read-write · current The matched Length | ||||
| SsleV2CpuPacketFilterControlMatchData | 1.3.6.1.4.1.6296.102.7.2.8.3.27 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current he matched data. (HEX string) | ||||
| SsleV2CpuPacketFilterControlMatchMask | 1.3.6.1.4.1.6296.102.7.2.8.3.28 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The matched mask. (HEX string) | ||||
| SsleV2CpuPacketFilterControlMatchDesc | 1.3.6.1.4.1.6296.102.7.2.8.3.29 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The matched Description | ||||
| NsleV2CpuPacketFilterNotification | 1.3.6.1.4.1.6296.102.7.2.8.4 | |||
| !sleV2CpuPacketFilterAdded | 1.3.6.1.4.1.6296.102.7.2.8.4.1 | |||
notification · current Description.
| ||||
| !sleV2CpuPacketFilterDeleted | 1.3.6.1.4.1.6296.102.7.2.8.4.2 | |||
notification · current Description. | ||||
| !sleV2CpuPacketFilterActionChanged | 1.3.6.1.4.1.6296.102.7.2.8.4.3 | |||
notification · current Description.
| ||||
| !sleV2CpuPacketFilterMatchChanged | 1.3.6.1.4.1.6296.102.7.2.8.4.4 | |||
notification · current Description.
| ||||
| NsleV2VlanOperation | 1.3.6.1.4.1.6296.102.7.2.9 | |||
| TsleV2VlanOperationTable | 1.3.6.1.4.1.6296.102.7.2.9.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleV2VlanOperationEntry | 1.3.6.1.4.1.6296.102.7.2.9.1.1 | NA | ||
| CsleV2VlanOperationIndex | 1.3.6.1.4.1.6296.102.7.2.9.1.1.1 | Integer32 (1..65565) | RO | |
column · Integer32 (1..65565) · read-only · current The vlan operation index. | ||||
| CsleV2VlanOperationName | 1.3.6.1.4.1.6296.102.7.2.9.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vlan operation name | ||||
| CsleV2VlanOperationStage | 1.3.6.1.4.1.6296.102.7.2.9.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The vlan operation stage.
| ||||
| CsleV2VlanOperationProiroty | 1.3.6.1.4.1.6296.102.7.2.9.1.1.4 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The vlan operation priority. | ||||
| CsleV2VlanOperationPort | 1.3.6.1.4.1.6296.102.7.2.9.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vlan operation ports | ||||
| CsleV2VlanOperationOuterVlan | 1.3.6.1.4.1.6296.102.7.2.9.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Outer vlan. | ||||
| CsleV2VlanOperationInnerVlan | 1.3.6.1.4.1.6296.102.7.2.9.1.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The inner Vlan. | ||||
| CsleV2VlanOperationEtherType | 1.3.6.1.4.1.6296.102.7.2.9.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan operation ether-type. | ||||
| CsleV2VlanOperationIpProtocol | 1.3.6.1.4.1.6296.102.7.2.9.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan operation IP Protocol | ||||
| CsleV2VlanOperationArpSip | 1.3.6.1.4.1.6296.102.7.2.9.1.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vlan operation source-IPaddress. | ||||
| CsleV2VlanOperationArpSipPfxLen | 1.3.6.1.4.1.6296.102.7.2.9.1.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan operation source-IPAddress prefix-length. | ||||
| CsleV2VlanOperationSip | 1.3.6.1.4.1.6296.102.7.2.9.1.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vlan operation Source-IPaddress. | ||||
| CsleV2VlanOperationSipPfxLen | 1.3.6.1.4.1.6296.102.7.2.9.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan operation Source-IPAddress prefix-length. | ||||
| CsleV2VlanOperationDip | 1.3.6.1.4.1.6296.102.7.2.9.1.1.14 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vlan operation Destination-IPaddress. | ||||
| CsleV2VlanOperationDipPfxLen | 1.3.6.1.4.1.6296.102.7.2.9.1.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The vlan operation Destination-IPAddress prefix-length. | ||||
| CsleV2VlanOperationAction | 1.3.6.1.4.1.6296.102.7.2.9.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current The vlan-operation action types.
| ||||
| CsleV2VlanOperationActionVid | 1.3.6.1.4.1.6296.102.7.2.9.1.1.17 | Integer32 (1..4095) | RO | |
column · Integer32 (1..4095) · read-only · current The vlan operation action-vid. | ||||
| NsleV2VlanOperationControl | 1.3.6.1.4.1.6296.102.7.2.9.2 | |||
| SsleV2VlanOperationControlRequest | 1.3.6.1.4.1.6296.102.7.2.9.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2VlanOperationControlStatus | 1.3.6.1.4.1.6296.102.7.2.9.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2VlanOperationControlTimer | 1.3.6.1.4.1.6296.102.7.2.9.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2VlanOperationControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.9.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2VlanOperationControlReqResult | 1.3.6.1.4.1.6296.102.7.2.9.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2VlanOperationControlIndex | 1.3.6.1.4.1.6296.102.7.2.9.2.6 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The vlan operation index. | ||||
| SsleV2VlanOperationControlName | 1.3.6.1.4.1.6296.102.7.2.9.2.7 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The vlan operation name | ||||
| SsleV2VlanOperationControlStage | 1.3.6.1.4.1.6296.102.7.2.9.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The vlan operation stage.
| ||||
| SsleV2VlanOperationControlProiroty | 1.3.6.1.4.1.6296.102.7.2.9.2.9 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current The vlan operation priority. | ||||
| SsleV2VlanOperationControlPort | 1.3.6.1.4.1.6296.102.7.2.9.2.10 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The vlan operation ports | ||||
| SsleV2VlanOperationControlOuterVlan | 1.3.6.1.4.1.6296.102.7.2.9.2.11 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Outer vlan. | ||||
| SsleV2VlanOperationControlInnerVlan | 1.3.6.1.4.1.6296.102.7.2.9.2.12 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Inner vlan. | ||||
| SsleV2VlanOperationControlEtherType | 1.3.6.1.4.1.6296.102.7.2.9.2.13 | Integer32 | RW | |
scalar · Integer32 · read-write · current The vlan operation ether-type. | ||||
| SsleV2VlanOperationControlIpProtocol | 1.3.6.1.4.1.6296.102.7.2.9.2.14 | Integer32 | RW | |
scalar · Integer32 · read-write · current The vlan operation IP Protocol | ||||
| SsleV2VlanOperationControlArpSip | 1.3.6.1.4.1.6296.102.7.2.9.2.15 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The vlan operation source-IPaddress. | ||||
| SsleV2VlanOperationControlArpSipPfxLen | 1.3.6.1.4.1.6296.102.7.2.9.2.16 | Integer32 | RW | |
scalar · Integer32 · read-write · current The vlan operation source-IPAddress prefix-length. | ||||
| SsleV2VlanOperationControlSip | 1.3.6.1.4.1.6296.102.7.2.9.2.17 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The vlan operation Source-IPaddress. | ||||
| SsleV2VlanOperationControlSipPfxLen | 1.3.6.1.4.1.6296.102.7.2.9.2.18 | Integer32 | RW | |
scalar · Integer32 · read-write · current The vlan operation Source-IPAddress prefix-length. | ||||
| SsleV2VlanOperationControlDip | 1.3.6.1.4.1.6296.102.7.2.9.2.19 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The vlan operation Destination-IPaddress. | ||||
| SsleV2VlanOperationControlDipPfxLen | 1.3.6.1.4.1.6296.102.7.2.9.2.20 | Integer32 | RW | |
scalar · Integer32 · read-write · current The vlan operation Destination-IPAddress prefix-length. | ||||
| SsleV2VlanOperationControlAction | 1.3.6.1.4.1.6296.102.7.2.9.2.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current The vlan-operation action types.
| ||||
| SsleV2VlanOperationControlActionVid | 1.3.6.1.4.1.6296.102.7.2.9.2.22 | Integer32 (1..4095) | RW | |
scalar · Integer32 (1..4095) · read-write · current The vlan operation action-vid. | ||||
| NsleV2VlanOperationNotification | 1.3.6.1.4.1.6296.102.7.2.9.3 | |||
| !sleV2VlanOperationCreated | 1.3.6.1.4.1.6296.102.7.2.9.3.1 | |||
notification · current addVlanOperation
| ||||
| !sleV2VlanOperationDeleted | 1.3.6.1.4.1.6296.102.7.2.9.3.2 | |||
notification · current delVlanOperation | ||||
| NsleV2EthernetService | 1.3.6.1.4.1.6296.102.7.2.10 | |||
| NsleV2EthernetServiceBase | 1.3.6.1.4.1.6296.102.7.2.10.1 | |||
| SsleV2EthernetServiceEnableStatus | 1.3.6.1.4.1.6296.102.7.2.10.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The ethernet service mode status.
| ||||
| SsleV2EthernetServiceEnableManagement | 1.3.6.1.4.1.6296.102.7.2.10.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The global management access status ( only in RT mode )
| ||||
| SsleV2EthernetServiceHealthCheckPort | 1.3.6.1.4.1.6296.102.7.2.10.1.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The health check port of uplink. ( only in COT mode ) | ||||
| SsleV2EthernetServiceHealthCheckVid | 1.3.6.1.4.1.6296.102.7.2.10.1.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The health check vid of uplink. ( only in COT mode ) | ||||
| TsleV2EthernetServiceTable | 1.3.6.1.4.1.6296.102.7.2.10.2 | NA | ||
table · not-accessible · current Description. | ||||
| RsleV2EthernetServiceEntry | 1.3.6.1.4.1.6296.102.7.2.10.2.1 | NA | ||
| CsleV2EthernetServiceSid | 1.3.6.1.4.1.6296.102.7.2.10.2.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current The unique number is given by service identifier. | ||||
| CsleV2EthernetServiceType | 1.3.6.1.4.1.6296.102.7.2.10.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ethernet service type 1: unicast 2: multicast
| ||||
| CsleV2EthernetServiceRtCustomerPort | 1.3.6.1.4.1.6296.102.7.2.10.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's customer port for RT mode. | ||||
| CsleV2EthernetServiceRtCustomerVid | 1.3.6.1.4.1.6296.102.7.2.10.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's customer vid for RT mode. | ||||
| CsleV2EthernetServiceRtNetworkPort | 1.3.6.1.4.1.6296.102.7.2.10.2.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's network port for RT mode. | ||||
| CsleV2EthernetServiceRtNetworkVid | 1.3.6.1.4.1.6296.102.7.2.10.2.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's network vid for RT mode. | ||||
| CsleV2EthernetServiceRtEnableManagement | 1.3.6.1.4.1.6296.102.7.2.10.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleV2EthernetServiceCotExternalPort | 1.3.6.1.4.1.6296.102.7.2.10.2.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's external port for COT mode. | ||||
| CsleV2EthernetServiceCotExternalVid | 1.3.6.1.4.1.6296.102.7.2.10.2.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's external vid for COT mode. | ||||
| CsleV2EthernetServiceCotInternalPort | 1.3.6.1.4.1.6296.102.7.2.10.2.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's internal port for COT mode. | ||||
| CsleV2EthernetServiceCotInternalVid | 1.3.6.1.4.1.6296.102.7.2.10.2.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Configuring service's internal vid for COT mode. | ||||
| NsleV2EthernetServiceControl | 1.3.6.1.4.1.6296.102.7.2.10.3 | |||
| SsleV2EthernetServiceControlRequest | 1.3.6.1.4.1.6296.102.7.2.10.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleV2EthernetServiceControlStatus | 1.3.6.1.4.1.6296.102.7.2.10.3.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleV2EthernetServiceControlTimer | 1.3.6.1.4.1.6296.102.7.2.10.3.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleV2EthernetServiceControlTimeStamp | 1.3.6.1.4.1.6296.102.7.2.10.3.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleV2EthernetServiceControlReqResult | 1.3.6.1.4.1.6296.102.7.2.10.3.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleV2EthernetServiceControlEnableStatus | 1.3.6.1.4.1.6296.102.7.2.10.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ethernet service mode status.
| ||||
| SsleV2EthernetServiceControlEnableManagement | 1.3.6.1.4.1.6296.102.7.2.10.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The local management access status ( only in RT mode )
| ||||
| SsleV2EthernetServiceControlHealthCheckPort | 1.3.6.1.4.1.6296.102.7.2.10.3.8 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The health check port of uplink. ( only in COT mode ) | ||||
| SsleV2EthernetServiceControlHealthCheckVid | 1.3.6.1.4.1.6296.102.7.2.10.3.9 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The health check vid of uplink. ( only in COT mode ) | ||||
| SsleV2EthernetServiceControlSid | 1.3.6.1.4.1.6296.102.7.2.10.3.10 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current The unique number is given by service identifier. | ||||
| SsleV2EthernetServiceControlType | 1.3.6.1.4.1.6296.102.7.2.10.3.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ethernet service type 1: unicast 2: multicast
| ||||
| SsleV2EthernetServiceControlRtCustomerPort | 1.3.6.1.4.1.6296.102.7.2.10.3.12 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's customer port for RT mode. | ||||
| SsleV2EthernetServiceControlRtCustomerVid | 1.3.6.1.4.1.6296.102.7.2.10.3.13 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's customer vid for RT mode. | ||||
| SsleV2EthernetServiceControlRtNetworkPort | 1.3.6.1.4.1.6296.102.7.2.10.3.14 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's network port for RT mode. | ||||
| SsleV2EthernetServiceControlRtNetworkVid | 1.3.6.1.4.1.6296.102.7.2.10.3.15 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's network vid for RT mode. | ||||
| SsleV2EthernetServiceControlRtEnableManagement | 1.3.6.1.4.1.6296.102.7.2.10.3.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleV2EthernetServiceControlCotExternalPort | 1.3.6.1.4.1.6296.102.7.2.10.3.17 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's external port for COT mode. | ||||
| SsleV2EthernetServiceControlCotExternalVid | 1.3.6.1.4.1.6296.102.7.2.10.3.18 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's external vid for COT mode. | ||||
| SsleV2EthernetServiceControlCotInternalPort | 1.3.6.1.4.1.6296.102.7.2.10.3.19 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's internal port for COT mode. | ||||
| SsleV2EthernetServiceControlCotInternalVid | 1.3.6.1.4.1.6296.102.7.2.10.3.20 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Configuring service's internal vid for COT mode. | ||||
| NsleV2EthernetServiceNotification | 1.3.6.1.4.1.6296.102.7.2.10.4 | |||
| !sleV2EthernetServiceEnableStatusChanged | 1.3.6.1.4.1.6296.102.7.2.10.4.1 | |||
notification · current setEnableStatus | ||||
| !sleV2EthernetServiceEnableManagementChanged | 1.3.6.1.4.1.6296.102.7.2.10.4.2 | |||
notification · current setEnableManagement | ||||
| !sleV2EthernetServiceHealthCheckChanged | 1.3.6.1.4.1.6296.102.7.2.10.4.3 | |||
notification · current setHealthCheck | ||||
| !sleV2EthernetServiceHealthCheckDeleted | 1.3.6.1.4.1.6296.102.7.2.10.4.4 | |||
notification · current delHealthCheck | ||||
| !sleV2EthernetServiceSidForRtModeCreated | 1.3.6.1.4.1.6296.102.7.2.10.4.5 | |||
notification · current setSidForRT
| ||||
| !sleV2EthernetServiceSidForCotModeCreated | 1.3.6.1.4.1.6296.102.7.2.10.4.6 | |||
notification · current setSidForCOT
| ||||
| !sleV2EthernetServiceSidDeleted | 1.3.6.1.4.1.6296.102.7.2.10.4.7 | |||
notification · current delService | ||||
| NsleV2Security6 | 1.3.6.1.4.1.6296.102.7.3 | |||
| GsleV2SecurityGroup | 1.3.6.1.4.1.6296.102.7.4 | |||
group · current Description.
| ||||
| GsleV2SecurityNotificationGroup | 1.3.6.1.4.1.6296.102.7.5 | |||
group · current Description.
| ||||
Textual conventions
MacAddressMaskOCTET STRING (SIZE (6))Represents Mac address Mask.
Traps / Notifications
- sleACLClassAllDestroyed
1.3.6.1.4.1.6296.102.7.2.5.3.1.3.3 - sleACLClassCreated
1.3.6.1.4.1.6296.102.7.2.5.3.1.3.1 - sleACLClassDestroyed
1.3.6.1.4.1.6296.102.7.2.5.3.1.3.2 - sleACLClassFlowAdded
1.3.6.1.4.1.6296.102.7.2.5.3.2.3.1 - sleACLClassFlowAllDeleted
1.3.6.1.4.1.6296.102.7.2.5.3.2.3.3 - sleACLClassFlowDeleted
1.3.6.1.4.1.6296.102.7.2.5.3.2.3.2 - sleACLFlowAllDestroyed
1.3.6.1.4.1.6296.102.7.2.5.2.1.3.4 - sleACLFlowChanged
1.3.6.1.4.1.6296.102.7.2.5.2.1.3.2 - sleACLFlowCreated
1.3.6.1.4.1.6296.102.7.2.5.2.1.3.1 - sleACLFlowDestroyed
1.3.6.1.4.1.6296.102.7.2.5.2.1.3.3 - sleACLFlowExChanged
1.3.6.1.4.1.6296.102.7.2.5.2.1.3.6 - sleACLFlowExCreated
1.3.6.1.4.1.6296.102.7.2.5.2.1.3.5 - sleACLPolicyAllClassDeleted
1.3.6.1.4.1.6296.102.7.2.5.4.2.3.4 - sleACLPolicyAllFlowClassDeleted
1.3.6.1.4.1.6296.102.7.2.5.4.2.3.5 - sleACLPolicyAllFlowDeleted
1.3.6.1.4.1.6296.102.7.2.5.4.2.3.3 - sleACLPolicyCreated
1.3.6.1.4.1.6296.102.7.2.5.4.1.3.1 - sleACLPolicyDestroyed
1.3.6.1.4.1.6296.102.7.2.5.4.1.3.5 - sleACLPolicyFlowAdded
1.3.6.1.4.1.6296.102.7.2.5.4.2.3.1 - sleACLPolicyFlowDeleted
1.3.6.1.4.1.6296.102.7.2.5.4.2.3.2 - sleACLPolicyInfoChanged
1.3.6.1.4.1.6296.102.7.2.5.4.1.3.2 - sleACLPolicyMatchActionChanged
1.3.6.1.4.1.6296.102.7.2.5.4.1.3.3 - sleACLPolicyNomatchActionChanged
1.3.6.1.4.1.6296.102.7.2.5.4.1.3.4 - sleSACLAllDestroyed
1.3.6.1.4.1.6296.102.7.2.6.3.3 - sleSACLCreated
1.3.6.1.4.1.6296.102.7.2.6.3.1 - sleSACLDestroyed
1.3.6.1.4.1.6296.102.7.2.6.3.2 - sleV2CpuPacketFilterActionChanged
1.3.6.1.4.1.6296.102.7.2.8.4.3 - sleV2CpuPacketFilterAdded
1.3.6.1.4.1.6296.102.7.2.8.4.1 - sleV2CpuPacketFilterDeleted
1.3.6.1.4.1.6296.102.7.2.8.4.2 - sleV2CpuPacketFilterMatchChanged
1.3.6.1.4.1.6296.102.7.2.8.4.4 - sleV2EthernetServiceEnableManagementChanged
1.3.6.1.4.1.6296.102.7.2.10.4.2 - sleV2EthernetServiceEnableStatusChanged
1.3.6.1.4.1.6296.102.7.2.10.4.1 - sleV2EthernetServiceHealthCheckChanged
1.3.6.1.4.1.6296.102.7.2.10.4.3 - sleV2EthernetServiceHealthCheckDeleted
1.3.6.1.4.1.6296.102.7.2.10.4.4 - sleV2EthernetServiceSidDeleted
1.3.6.1.4.1.6296.102.7.2.10.4.7 - sleV2EthernetServiceSidForCotModeCreated
1.3.6.1.4.1.6296.102.7.2.10.4.6 - sleV2EthernetServiceSidForRtModeCreated
1.3.6.1.4.1.6296.102.7.2.10.4.5 - sleV2Security4ACLGroupIfProfileAdd
1.3.6.1.4.1.6296.102.7.2.5.5.1.3.1 - sleV2Security4ACLGroupIfProfileDelete
1.3.6.1.4.1.6296.102.7.2.5.5.1.3.2 - sleV2SecurityACLStatisticsCleared
1.3.6.1.4.1.6296.102.7.2.7.2.4.1 - sleV2SecurityACLStatisticsSyslogModeChanged
1.3.6.1.4.1.6296.102.7.2.7.1.3.1 - sleV2VlanOperationCreated
1.3.6.1.4.1.6296.102.7.2.9.3.1 - sleV2VlanOperationDeleted
1.3.6.1.4.1.6296.102.7.2.9.3.2