SLE-PM-MIB
DASAN Co.,LTD.This MIB contains all needed informations about Performance Manager.
snmptranslate -m SLE-PM-MIB -Tpsnmpwalk -v2c -c <community> -m SLE-PM-MIB <host> 1.3.6.1.4.1.6296.101.94Imports
| DASAN-SMI | sleMgmt |
|---|---|
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, zeroDotZero |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IslePmMgr | 1.3.6.1.4.1.6296.101.94 | |||
identity This MIB contains all needed informations about Performance Manager. | ||||
| SslePmNeId | 1.3.6.1.4.1.6296.101.94.1 | OCTET STRING (SIZE (6)) | RO | |
scalar · OCTET STRING (SIZE (6)) · read-only · current system MAC address | ||||
| NslePmConfigBase | 1.3.6.1.4.1.6296.101.94.2 | |||
| TslePmConfigTable | 1.3.6.1.4.1.6296.101.94.2.1 | NA | ||
table · not-accessible · current This table is the Performance Config table. It gets populated when system init is done. And it contains all the class performance supported for the device | ||||
| RslePmConfigEntry | 1.3.6.1.4.1.6296.101.94.2.1.1 | NA | ||
row · not-accessible · current
| ||||
| CslePmConfigSeqId | 1.3.6.1.4.1.6296.101.94.2.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Description. | ||||
| CslePmConfigClassId | 1.3.6.1.4.1.6296.101.94.2.1.1.2 | PmClassId | RO | |
column · PmClassId · read-only · current Class ID starts from 1 to 255 for the system. And these IDs are generated internally | ||||
| CslePmConfigPmId | 1.3.6.1.4.1.6296.101.94.2.1.1.3 | PmId | RO | |
column · PmId · read-only · current Current PM ID | ||||
| CslePmConfigSource | 1.3.6.1.4.1.6296.101.94.2.1.1.4 | PmSrc | RO | |
column · PmSrc · read-only · current |type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value | ||||
| CslePmConfigTcaStat | 1.3.6.1.4.1.6296.101.94.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current TCA status TCA Normal (0) TCA Occur (1)
| ||||
| CslePmConfigTcaEnable | 1.3.6.1.4.1.6296.101.94.2.1.1.6 | PmTcaState | RO | |
column · PmTcaState · read-only · current TCA enable Confguration : enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user. | ||||
| CslePmConfigTh15Min | 1.3.6.1.4.1.6296.101.94.2.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current 15minute Performance TCA threshold configuration count | ||||
| CslePmConfigTh1Day | 1.3.6.1.4.1.6296.101.94.2.1.1.8 | Counter64 | RW | |
column · Counter64 · read-write · current 1day Performance TCA threshold configuration count | ||||
| NslePmConfigControl | 1.3.6.1.4.1.6296.101.94.2.2 | |||
| SslePmConfigControlRequest | 1.3.6.1.4.1.6296.101.94.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration commands, and user can configure functions via setting this entry as proper value.
| ||||
| SslePmConfigControlStatus | 1.3.6.1.4.1.6296.101.94.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current status of user command. User have to check this value as .busy. or .idle. before do setRequest. | ||||
| SslePmConfigControlTimer | 1.3.6.1.4.1.6296.101.94.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current the wait-time until setRequest end. In case of short-time command, this value is 0 | ||||
| SslePmConfigControlTimeStamp | 1.3.6.1.4.1.6296.101.94.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current the time stamp of the last command. (don.t care) | ||||
| SslePmConfigControlReqResult | 1.3.6.1.4.1.6296.101.94.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Result of the last command. | ||||
| SslePmConfigControlSeqId | 1.3.6.1.4.1.6296.101.94.2.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current PM Manager Class ID | ||||
| SslePmConfigControlTcaEnable | 1.3.6.1.4.1.6296.101.94.2.2.7 | PmTcaState | RW | |
scalar · PmTcaState · read-write · current TCA enable Confguration : enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user. | ||||
| SslePmConfigControlTh15Min | 1.3.6.1.4.1.6296.101.94.2.2.8 | Counter64 | RW | |
scalar · Counter64 · read-write · current 15minute Performance TCA threshold configuration count | ||||
| SslePmConfigControlTh1Day | 1.3.6.1.4.1.6296.101.94.2.2.9 | Counter64 | RW | |
scalar · Counter64 · read-write · current 1day Performance TCA threshold configuration count | ||||
| NslePmConfigNotification | 1.3.6.1.4.1.6296.101.94.2.3 | |||
| !slePmConfigTcaEnableChanged | 1.3.6.1.4.1.6296.101.94.2.3.1 | |||
notification · current Notification for Tca Enable change | ||||
| !slePmConfigTh15MinChanged | 1.3.6.1.4.1.6296.101.94.2.3.2 | |||
notification · current Notification for 15minute theshold change | ||||
| !slePmConfigTh1DayChanged | 1.3.6.1.4.1.6296.101.94.2.3.3 | |||
notification · current Notification for 1day theshold change | ||||
| NslePmCurrentBase | 1.3.6.1.4.1.6296.101.94.3 | |||
| TslePmCurrentTable | 1.3.6.1.4.1.6296.101.94.3.1 | NA | ||
table · not-accessible · current This table contains the current PM count. | ||||
| RslePmCurrentEntry | 1.3.6.1.4.1.6296.101.94.3.1.1 | NA | ||
row · not-accessible · current | ||||
| CslePmCurrentSeqId | 1.3.6.1.4.1.6296.101.94.3.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Description. | ||||
| CslePmCurrentClassId | 1.3.6.1.4.1.6296.101.94.3.1.1.2 | PmClassId | RO | |
column · PmClassId · read-only · current Current Class ID | ||||
| CslePmCurrentPmId | 1.3.6.1.4.1.6296.101.94.3.1.1.3 | PmId | RO | |
column · PmId · read-only · current Current PM ID | ||||
| CslePmCurrentSource | 1.3.6.1.4.1.6296.101.94.3.1.1.4 | PmSrc | RO | |
column · PmSrc · read-only · current |type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value | ||||
| CslePmCurrentTerm | 1.3.6.1.4.1.6296.101.94.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Description.
| ||||
| CslePmCurrentPmCount | 1.3.6.1.4.1.6296.101.94.3.1.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Current Performance count | ||||
| CslePmCurrentAccSecond | 1.3.6.1.4.1.6296.101.94.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current Current Performance data accumulation seconds(count) | ||||
| CslePmCurrentTcaStat | 1.3.6.1.4.1.6296.101.94.3.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current TCA status TCA Normal (0) TCA Occur (1)
| ||||
| CslePmCurrentTcaTime | 1.3.6.1.4.1.6296.101.94.3.1.1.9 | TimeTicks | RO | |
column · TimeTicks · read-only · current Current PM Time and Date | ||||
| NslePmCurrentControl | 1.3.6.1.4.1.6296.101.94.3.2 | |||
| SslePmCurrentControlRequest | 1.3.6.1.4.1.6296.101.94.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration commands, and user can configure functions via setting this entry as proper value. clearCurrentPm(1): Clears the current Performance count (both 15min and 1day) PM history(accumulation) count is not cleared clearCurrentTca(2): Clears the current Performance TCA flag (both 15min and 1day)
| ||||
| SslePmCurrentControlStatus | 1.3.6.1.4.1.6296.101.94.3.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current status of user command. User have to check this value as .busy. or .idle. before do setRequest. | ||||
| SslePmCurrentControlTimer | 1.3.6.1.4.1.6296.101.94.3.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current the wait-time until setRequest end. In case of short-time command, this value is 0 | ||||
| SslePmCurrentControlTimeStamp | 1.3.6.1.4.1.6296.101.94.3.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current the time stamp of the last command. (don.t care) | ||||
| SslePmCurrentControlReqResult | 1.3.6.1.4.1.6296.101.94.3.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Result of the last command. | ||||
| NslePmCurrentNotification | 1.3.6.1.4.1.6296.101.94.3.3 | |||
| !slePmCurrentPmCleared | 1.3.6.1.4.1.6296.101.94.3.3.1 | |||
notification · current Notification for current PM clear | ||||
| NslePMHistoryBase | 1.3.6.1.4.1.6296.101.94.4 | |||
| TslePmHistoryTable | 1.3.6.1.4.1.6296.101.94.4.1 | NA | ||
table · not-accessible · current This Table is used to for keeping the PM History | ||||
| RslePmHistoryEntry | 1.3.6.1.4.1.6296.101.94.4.1.1 | NA | ||
row · not-accessible · current | ||||
| CslePmHistorySeqId | 1.3.6.1.4.1.6296.101.94.4.1.1.1 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Description. | ||||
| CslePmHistoryClassId | 1.3.6.1.4.1.6296.101.94.4.1.1.2 | PmClassId | RO | |
column · PmClassId · read-only · current History Class ID. | ||||
| CslePmHistoryPmId | 1.3.6.1.4.1.6296.101.94.4.1.1.3 | PmId | RO | |
column · PmId · read-only · current History PM Id | ||||
| CslePmHistoryPmSource | 1.3.6.1.4.1.6296.101.94.4.1.1.4 | PmSrc | RO | |
column · PmSrc · read-only · current |type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value | ||||
| CslePmHistoryTerm | 1.3.6.1.4.1.6296.101.94.4.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CslePmHistoryIndex | 1.3.6.1.4.1.6296.101.94.4.1.1.6 | INTEGER (1..31) | RO | |
column · INTEGER (1..31) · read-only · current History Index: 15min : 1 ~ 96, 1-day : 1 ~ 7 | ||||
| CslePmHistoryPmCount | 1.3.6.1.4.1.6296.101.94.4.1.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current History Performance count | ||||
| CslePmHistoryAccCount | 1.3.6.1.4.1.6296.101.94.4.1.1.8 | Counter32 | RW | |
column · Counter32 · read-write · current Description. | ||||
| CslePmHistoryStartTime | 1.3.6.1.4.1.6296.101.94.4.1.1.9 | TimeTicks | RO | |
column · TimeTicks · read-only · current Description. | ||||
| NslePmHistoryControl | 1.3.6.1.4.1.6296.101.94.4.2 | |||
| SslePmHistoryControlRequest | 1.3.6.1.4.1.6296.101.94.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The configuration commands, and user can configure functions via setting this entry as proper value. clearPmHistory : clears all the PM History Table
| ||||
| SslePmHistoryControlStatus | 1.3.6.1.4.1.6296.101.94.4.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current status of user command. User have to check this value as .busy. or .idle. before do setRequest. | ||||
| SslePmHistoryControlTimer | 1.3.6.1.4.1.6296.101.94.4.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current the wait-time until setRequest end. In case of short-time command, this value is 0 | ||||
| SslePmHistoryControlTimeStamp | 1.3.6.1.4.1.6296.101.94.4.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current the time stamp of the last command. (don.t care) | ||||
| SslePmHistoryControlReqResult | 1.3.6.1.4.1.6296.101.94.4.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Result of the last command. | ||||
| NslePmHistoryNotification | 1.3.6.1.4.1.6296.101.94.4.3 | |||
| !slePmHistoryPmCleared | 1.3.6.1.4.1.6296.101.94.4.3.1 | |||
notification · current Notification for PM History cleared | ||||
Textual conventions
PmClassIdINTEGER (1..65535)Description.
PmDateTimeUnsigned32TOD integer value
PmIdINTEGER (1..65535)Current PM ID
PmSrcOCTET STRING (SIZE (68))|type|length|value|type|length|value|.... type (1-byte) : PM location type length(1-byte) : PM location value length value (length-bytes) : PM location value
PmTcaStateINTEGERdisable(0)enable(1)This status explains whether TRAP status is enabled or disabled. Enable(1) : TCA State is Enabled. Hence TRAPs will be sent for this. Disable(0) : TCA State is Disabled. So TCA won't be notified to user.
Traps / Notifications
- slePmConfigTcaEnableChanged
1.3.6.1.4.1.6296.101.94.2.3.1 - slePmConfigTh15MinChanged
1.3.6.1.4.1.6296.101.94.2.3.2 - slePmConfigTh1DayChanged
1.3.6.1.4.1.6296.101.94.2.3.3 - slePmCurrentPmCleared
1.3.6.1.4.1.6296.101.94.3.3.1 - slePmHistoryPmCleared
1.3.6.1.4.1.6296.101.94.4.3.1