SLE-NETWORK-MIB
DASAN Co.,LTD.This MIB contains all needed informations about DHCP and all supported sle DHCP features.
snmptranslate -m SLE-NETWORK-MIB -Tpsnmpwalk -v2c -c <community> -m SLE-NETWORK-MIB <host> 1.3.6.1.4.1.6296.101.11Imports
| DASAN-SMI | sleMgmt |
|---|---|
| IANAifType-MIB | IANAtunnelType |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Bits, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsleNetwork | 1.3.6.1.4.1.6296.101.11 | |||
identity This MIB contains all needed informations about DHCP and all supported sle DHCP features. | ||||
| NsleNetInterface | 1.3.6.1.4.1.6296.101.11.1 | |||
| TsleNetIfTable | 1.3.6.1.4.1.6296.101.11.1.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleNetIfEntry | 1.3.6.1.4.1.6296.101.11.1.1.1 | NA | ||
| CsleNetIfIndex | 1.3.6.1.4.1.6296.101.11.1.1.1.1 | Integer32 (0..11023) | RO | |
column · Integer32 (0..11023) · read-only · current Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index | ||||
| CsleNetIfName | 1.3.6.1.4.1.6296.101.11.1.1.1.2 | OCTET STRING (SIZE (0..8)) | RO | |
column · OCTET STRING (SIZE (0..8)) · read-only · current Device Name of this Interface. | ||||
| CsleNetIfDescription | 1.3.6.1.4.1.6296.101.11.1.1.1.3 | OCTET STRING (SIZE (0..64)) | RO | |
column · OCTET STRING (SIZE (0..64)) · read-only · current Description of this interface. | ||||
| CsleNetIfTableIndex | 1.3.6.1.4.1.6296.101.11.1.1.1.4 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Same as ifIndex (for appropriated ifTable entries). | ||||
| CsleNetIfRegState | 1.3.6.1.4.1.6296.101.11.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Registered state of Network device.
| ||||
| CsleNetIfAdminState | 1.3.6.1.4.1.6296.101.11.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Administrative state. down - shutdown up - noshutdown
| ||||
| CsleNetIfOperState | 1.3.6.1.4.1.6296.101.11.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Operational state. down - shutdown or not running up - running
| ||||
| CsleNetIfMulticast | 1.3.6.1.4.1.6296.101.11.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Multicast enable/disable state.
| ||||
| CsleNetIfMtu | 1.3.6.1.4.1.6296.101.11.1.1.1.9 | INTEGER (64..17940) | RO | |
column · INTEGER (64..17940) · read-only · current Maximum Transmission Unit. | ||||
| CsleNetIfIpSetMode | 1.3.6.1.4.1.6296.101.11.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current IP address setting mode. 0 : static 1 : dynamic (by DHCP client)
| ||||
| CsleNetIfIpMartianFilter | 1.3.6.1.4.1.6296.101.11.1.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleNetIfUpCnt | 1.3.6.1.4.1.6296.101.11.1.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The times of link-up event. | ||||
| CsleNetIfDownCnt | 1.3.6.1.4.1.6296.101.11.1.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The times of link-down event. | ||||
| CsleNetIfLinkUpTime | 1.3.6.1.4.1.6296.101.11.1.1.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The elapsed time after link is up.
| ||||
| CsleNetIfElapsedTimeAfterClearStats | 1.3.6.1.4.1.6296.101.11.1.1.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The elapsed time after clearing status.
| ||||
| CsleNetIfBindingVRFName | 1.3.6.1.4.1.6296.101.11.1.1.1.16 | OCTET STRING (SIZE (0..63)) | RO | |
column · OCTET STRING (SIZE (0..63)) · read-only · current VRF name that this tunnel interface is binding. | ||||
| CsleNetIfOnFailUseVRF | 1.3.6.1.4.1.6296.101.11.1.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Lookup into a global routing table when the VRF routing table lookup was failed.
| ||||
| CsleNetIfIpUnreachability | 1.3.6.1.4.1.6296.101.11.1.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current IP unreachability ON/OFF
| ||||
| CsleNetIfipRedirects | 1.3.6.1.4.1.6296.101.11.1.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleNetIfIpForwarding | 1.3.6.1.4.1.6296.101.11.1.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current The IP forwarding status
| ||||
| CsleNetIfAlias | 1.3.6.1.4.1.6296.101.11.1.1.1.21 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current lias Name for the Interface | ||||
| CsleNetIfIpArpAlias | 1.3.6.1.4.1.6296.101.11.1.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current IP Arp Alias state
| ||||
| CsleNetIfIpArpAliasMac | 1.3.6.1.4.1.6296.101.11.1.1.1.23 | MacAddress | RO | |
column · MacAddress · read-only · current IP Arp Alias MAC | ||||
| CsleNetIfArpMCProbeCount | 1.3.6.1.4.1.6296.101.11.1.1.1.24 | Integer32 (2..10) | RO | |
column · Integer32 (2..10) · read-only · current ARP request Multicast probe count | ||||
| CsleNetIfArpUCProbeCount | 1.3.6.1.4.1.6296.101.11.1.1.1.25 | Integer32 (2..10) | RO | |
column · Integer32 (2..10) · read-only · current ARP request Unicast probe count | ||||
| CsleNetIfArpRetransTime | 1.3.6.1.4.1.6296.101.11.1.1.1.26 | Integer32 (1..300) | RO | |
column · Integer32 (1..300) · read-only · current Retrans time of ARP request (unit: 1s) | ||||
| CsleNetIfIpProxyArp | 1.3.6.1.4.1.6296.101.11.1.1.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current IP Proxy Arp state
| ||||
| CsleNetIfIpRPFilter | 1.3.6.1.4.1.6296.101.11.1.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current IP Reverse Path Filtering of CPU
| ||||
| CsleNetIfRPFilter | 1.3.6.1.4.1.6296.101.11.1.1.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current Reverse Path Filtering of CHIP (default : looseAllow)
| ||||
| CsleNetIfRouteMap | 1.3.6.1.4.1.6296.101.11.1.1.1.30 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current IP Policy route-map name | ||||
| NsleNetIfControl | 1.3.6.1.4.1.6296.101.11.1.2 | |||
| SsleNetIfControlRequest | 1.3.6.1.4.1.6296.101.11.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleNetIfControlStatus | 1.3.6.1.4.1.6296.101.11.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleNetIfControlTimer | 1.3.6.1.4.1.6296.101.11.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleNetIfControlTimeStamp | 1.3.6.1.4.1.6296.101.11.1.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The time stamp of the last command (end of command). | ||||
| SsleNetIfControlReqResult | 1.3.6.1.4.1.6296.101.11.1.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The result of the last user command. | ||||
| SsleNetIfControlIndex | 1.3.6.1.4.1.6296.101.11.1.2.6 | Integer32 (0..11023) | RW | |
scalar · Integer32 (0..11023) · read-write · current Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index | ||||
| SsleNetIfControlDescription | 1.3.6.1.4.1.6296.101.11.1.2.7 | OCTET STRING (SIZE (0..64)) | RW | |
scalar · OCTET STRING (SIZE (0..64)) · read-write · current Description of this interface. | ||||
| SsleNetIfControlRegState | 1.3.6.1.4.1.6296.101.11.1.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleNetIfControlAdminState | 1.3.6.1.4.1.6296.101.11.1.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Administrative state.
| ||||
| SsleNetIfControlMulticast | 1.3.6.1.4.1.6296.101.11.1.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Multicast enable/disable state.
| ||||
| SsleNetIfControlMtu | 1.3.6.1.4.1.6296.101.11.1.2.11 | INTEGER (64..17940) | RW | |
scalar · INTEGER (64..17940) · read-write · current Maximum Transmission Unit. | ||||
| SsleNetIfControlIpMartianFilter | 1.3.6.1.4.1.6296.101.11.1.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleNetIfControlBindingVRFName | 1.3.6.1.4.1.6296.101.11.1.2.13 | OCTET STRING (SIZE (0..63)) | RW | |
scalar · OCTET STRING (SIZE (0..63)) · read-write · current VRF name that this tunnel interface is binding. | ||||
| SsleNetIfControlOnFailUseVRF | 1.3.6.1.4.1.6296.101.11.1.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Lookup into a global routing table when the VRF routing table lookup was failed.
| ||||
| SsleNetIfControlIpUnreachability | 1.3.6.1.4.1.6296.101.11.1.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP unreachability ON/OFF
| ||||
| SsleNetIfControlIpRedirects | 1.3.6.1.4.1.6296.101.11.1.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleNetIfControlIpForwarding | 1.3.6.1.4.1.6296.101.11.1.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current The IP forwarding status
| ||||
| SsleNetIfControlAlias | 1.3.6.1.4.1.6296.101.11.1.2.18 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Alias Name for the Interface | ||||
| SsleNetIfControlIpArpAlias | 1.3.6.1.4.1.6296.101.11.1.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP Arp Alias state
| ||||
| SsleNetIfControlIpArpAliasMac | 1.3.6.1.4.1.6296.101.11.1.2.20 | MacAddress | RW | |
scalar · MacAddress · read-write · current IP Arp Alias MAC | ||||
| SsleNetIfControlArpMCProbeCount | 1.3.6.1.4.1.6296.101.11.1.2.21 | Integer32 (2..10) | RW | |
scalar · Integer32 (2..10) · read-write · current ARP request Multicast probe count | ||||
| SsleNetIfControlArpUCProbeCount | 1.3.6.1.4.1.6296.101.11.1.2.22 | Integer32 (2..10) | RW | |
scalar · Integer32 (2..10) · read-write · current ARP request Unicast probe count | ||||
| SsleNetIfControlArpRetransTime | 1.3.6.1.4.1.6296.101.11.1.2.23 | Integer32 (1..300) | RW | |
scalar · Integer32 (1..300) · read-write · current Retrans time of ARP request (unit: 1s) | ||||
| SsleNetIfControlIpProxyArp | 1.3.6.1.4.1.6296.101.11.1.2.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP Proxy Arp state
| ||||
| SsleNetIfControlIpRPFilter | 1.3.6.1.4.1.6296.101.11.1.2.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current IP Reverse Path Filtering of CPU
| ||||
| SsleNetIfControlRPFilter | 1.3.6.1.4.1.6296.101.11.1.2.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Reverse Path Filtering of CHIP (default : looseAllow)
| ||||
| SsleNetIfControlRouteMap | 1.3.6.1.4.1.6296.101.11.1.2.27 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current IP Policy route-map name | ||||
| NsleNetIfNotification | 1.3.6.1.4.1.6296.101.11.1.3 | |||
| !sleNetIfRegStateChanged | 1.3.6.1.4.1.6296.101.11.1.3.1 | |||
notification · current Description. | ||||
| !sleNetIfProfileChanged | 1.3.6.1.4.1.6296.101.11.1.3.2 | |||
notification · current setNetIfProfile. | ||||
| !sleNetIfIpMartianFilterChanged | 1.3.6.1.4.1.6296.101.11.1.3.3 | |||
notification · current Description. | ||||
| !sleNetIfBindingVRFSet | 1.3.6.1.4.1.6296.101.11.1.3.4 | |||
notification · current Description. | ||||
| !sleNetIfBindingVRFUnset | 1.3.6.1.4.1.6296.101.11.1.3.5 | |||
notification · current Description. | ||||
| !sleNetIfIpOnFailUseVRFChanged | 1.3.6.1.4.1.6296.101.11.1.3.6 | |||
notification · current Description. | ||||
| !sleNetIfIpUnreachabilityChanged | 1.3.6.1.4.1.6296.101.11.1.3.7 | |||
notification · current Description. | ||||
| !sleNetIfIpRedirectsChanged | 1.3.6.1.4.1.6296.101.11.1.3.8 | |||
notification · current Description. | ||||
| !sleNetIfIpForwardingChanged | 1.3.6.1.4.1.6296.101.11.1.3.9 | |||
notification · current setNetIfIpForwarding | ||||
| !sleNetIfAliasChanged | 1.3.6.1.4.1.6296.101.11.1.3.10 | |||
notification · current setAlias | ||||
| !sleNetIfIpArpAliasChanged | 1.3.6.1.4.1.6296.101.11.1.3.11 | |||
notification · current setIpArpAlias | ||||
| !sleNetIfArpMCProbeCountChanged | 1.3.6.1.4.1.6296.101.11.1.3.12 | |||
notification · current setArpMCProbeCount | ||||
| !sleNetIfArpUCProbeCountChanged | 1.3.6.1.4.1.6296.101.11.1.3.13 | |||
notification · current setArpUCProbeCount | ||||
| !sleNetIfArpRetransTimeChanged | 1.3.6.1.4.1.6296.101.11.1.3.14 | |||
notification · current setArpRetransTime | ||||
| !sleNetIfIpProxyArpChanged | 1.3.6.1.4.1.6296.101.11.1.3.15 | |||
notification · current setIpProxyArp | ||||
| !sleNetIfIpRPFilterChanged | 1.3.6.1.4.1.6296.101.11.1.3.16 | |||
notification · current setIpRPFilter | ||||
| !sleNetIfRPFilterChanged | 1.3.6.1.4.1.6296.101.11.1.3.17 | |||
notification · current setRPFilter | ||||
| !sleNetIfRouteMapChanged | 1.3.6.1.4.1.6296.101.11.1.3.18 | |||
notification · current setRouteMap | ||||
| NsleIpAddress | 1.3.6.1.4.1.6296.101.11.2 | |||
| TsleIpAddrTable | 1.3.6.1.4.1.6296.101.11.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleIpAddrEntry | 1.3.6.1.4.1.6296.101.11.2.1.1 | NA | ||
| CsleIpAddrValue | 1.3.6.1.4.1.6296.101.11.2.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to which this entry's addressing information pertains. | ||||
| CsleIpAddrMask | 1.3.6.1.4.1.6296.101.11.2.1.1.2 | Integer32 (1..32) | RO | |
column · Integer32 (1..32) · read-only · current The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| CsleIpAddrBcast | 1.3.6.1.4.1.6296.101.11.2.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface. | ||||
| CsleIpAddrFlag | 1.3.6.1.4.1.6296.101.11.2.1.1.4 | Bits | RO | |
column · Bits · read-only · current Description.
| ||||
| CsleIpAddrScope | 1.3.6.1.4.1.6296.101.11.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleIpAddrIpIndex | 1.3.6.1.4.1.6296.101.11.2.1.1.6 | INTEGER (0..1024) | RO | |
column · INTEGER (0..1024) · read-only · current The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024) | ||||
| CsleIpAddrUnnumUsedIp | 1.3.6.1.4.1.6296.101.11.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Check a specific IP address for using interface unnumbered feature.
| ||||
| NsleIpAddrControl | 1.3.6.1.4.1.6296.101.11.2.2 | |||
| SsleIpAddrControlRequest | 1.3.6.1.4.1.6296.101.11.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleIpAddrControlStatus | 1.3.6.1.4.1.6296.101.11.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleIpAddrControlTimer | 1.3.6.1.4.1.6296.101.11.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleIpAddrControlTimeStamp | 1.3.6.1.4.1.6296.101.11.2.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The time stamp of the last command (end of command). | ||||
| SsleIpAddrControlReqResult | 1.3.6.1.4.1.6296.101.11.2.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The result of the last user command. | ||||
| SsleIpAddrControlNetIfIndex | 1.3.6.1.4.1.6296.101.11.2.2.6 | Integer32 (1..4094 | 10000..11023) | RW | |
scalar · Integer32 (1..4094 | 10000..11023) · read-write · current Network interface index 1..4094 : VLAN 10000..11023: Tunnel interface index | ||||
| SsleIpAddrControlValue | 1.3.6.1.4.1.6296.101.11.2.2.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to which this entry's addressing information pertains. | ||||
| SsleIpAddrControlMask | 1.3.6.1.4.1.6296.101.11.2.2.8 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current The subnet mask associated with the IP address of this entry. | ||||
| SsleIpAddrControlFlag | 1.3.6.1.4.1.6296.101.11.2.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleIpAddrControlScope | 1.3.6.1.4.1.6296.101.11.2.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleIpAddrControlIpIndex | 1.3.6.1.4.1.6296.101.11.2.2.11 | INTEGER (1..1024) | RW | |
scalar · INTEGER (1..1024) · read-write · current The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024) | ||||
| NsleIpAddrNotification | 1.3.6.1.4.1.6296.101.11.2.3 | |||
| !sleIpAddressCreated | 1.3.6.1.4.1.6296.101.11.2.3.1 | |||
notification · current createIpAddress. | ||||
| !sleIpAddressDestroyed | 1.3.6.1.4.1.6296.101.11.2.3.2 | |||
notification · current destroyIpAddress. | ||||
| !sleIpAddressIpIndexAdded | 1.3.6.1.4.1.6296.101.11.2.3.3 | |||
notification · current addIpIndex | ||||
| !sleIpAddressIpIndexDeleted | 1.3.6.1.4.1.6296.101.11.2.3.4 | |||
notification · current delIpIndex | ||||
| NsleArp | 1.3.6.1.4.1.6296.101.11.3 | |||
| TsleArpTable | 1.3.6.1.4.1.6296.101.11.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleArpEntry | 1.3.6.1.4.1.6296.101.11.3.1.1 | NA | ||
| CsleArpIpAddress | 1.3.6.1.4.1.6296.101.11.3.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. | ||||
| CsleArpPhyAddress | 1.3.6.1.4.1.6296.101.11.3.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The media-dependent `physical' address. | ||||
| CsleArpPortIndex | 1.3.6.1.4.1.6296.101.11.3.1.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The interface on which this entry's equivalence is effective. 0: for any ports. | ||||
| CsleArpState | 1.3.6.1.4.1.6296.101.11.3.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Arp entry's currently status.
| ||||
| CsleArpHwType | 1.3.6.1.4.1.6296.101.11.3.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Hardware Type of media.
| ||||
| CsleArpHwUsed | 1.3.6.1.4.1.6296.101.11.3.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Arp entry's currently chip usage state.
| ||||
| CsleArpUsedTime | 1.3.6.1.4.1.6296.101.11.3.1.1.7 | INTEGER (1..10000000) | RO | |
column · INTEGER (1..10000000) · read-only · current Arp entry's chip used time.(if sleArpState is 0, always 0 and if sleArpHwUsed is 0, always 0.) | ||||
| NsleArpControl | 1.3.6.1.4.1.6296.101.11.3.2 | |||
| SsleArpControlRequest | 1.3.6.1.4.1.6296.101.11.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleArpControlStatus | 1.3.6.1.4.1.6296.101.11.3.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleArpControlTimer | 1.3.6.1.4.1.6296.101.11.3.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleArpControlTimeStamp | 1.3.6.1.4.1.6296.101.11.3.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The time stamp of the last command (end of command). | ||||
| SsleArpControlReqResult | 1.3.6.1.4.1.6296.101.11.3.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The result of the last user command. | ||||
| SsleArpControlNetIfIndex | 1.3.6.1.4.1.6296.101.11.3.2.6 | Integer32 (0..4096) | RW | |
scalar · Integer32 (0..4096) · read-write · current Network interface index. | ||||
| SsleArpControlIpAddress | 1.3.6.1.4.1.6296.101.11.3.2.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. | ||||
| SsleArpControlPhyAddress | 1.3.6.1.4.1.6296.101.11.3.2.8 | MacAddress | RW | |
scalar · MacAddress · read-write · current The media-dependent `physical' address. | ||||
| SsleArpControlState | 1.3.6.1.4.1.6296.101.11.3.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Arp entry's currently status.
| ||||
| SsleArpControlMask | 1.3.6.1.4.1.6296.101.11.3.2.10 | INTEGER (0..32) | RW | |
scalar · INTEGER (0..32) · read-write · current Description. | ||||
| NsleArpNotification | 1.3.6.1.4.1.6296.101.11.3.3 | |||
| !sleArpEntryCreated | 1.3.6.1.4.1.6296.101.11.3.3.1 | |||
notification · current createArpEntry. | ||||
| !sleArpEntryDestroyed | 1.3.6.1.4.1.6296.101.11.3.3.2 | |||
notification · current destroyArpEntry. | ||||
| !sleArpTableCleared | 1.3.6.1.4.1.6296.101.11.3.3.3 | |||
notification · current clearArpTable. In this notification PDU, key of sleArpState is ifindex.0.0.0.0. | ||||
| !sleArpTableClearedByAddr | 1.3.6.1.4.1.6296.101.11.3.3.4 | |||
notification · current clearArpTableByAddr | ||||
| NsleRoute | 1.3.6.1.4.1.6296.101.11.4 | |||
| TsleRouteTable | 1.3.6.1.4.1.6296.101.11.4.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleRouteEntry | 1.3.6.1.4.1.6296.101.11.4.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleRouteDstAddress | 1.3.6.1.4.1.6296.101.11.4.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use. | ||||
| CsleRouteDstMask | 1.3.6.1.4.1.6296.101.11.4.1.1.2 | INTEGER (0..32) | RO | |
column · INTEGER (0..32) · read-only · current Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the sleRouteDstMask by determining whether the value of the correspondent sleRouteDstAddress field belong to a class-A, B, or C network. If the value of the sleRouteDstAddress is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. | ||||
| CsleRouteGateway | 1.3.6.1.4.1.6296.101.11.4.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid | ||||
| CsleRouteInterface | 1.3.6.1.4.1.6296.101.11.4.1.1.4 | INTEGER (0..11023) | RO | |
column · INTEGER (0..11023) · read-only · current The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of sleNetIfIndex. Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index | ||||
| CsleRouteType | 1.3.6.1.4.1.6296.101.11.4.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The type of route. Note that the values direct and indirect refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid has the effect of invalidating the corresponding entry in the sleRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant sleRouteType object.
| ||||
| CsleRouteProto | 1.3.6.1.4.1.6296.101.11.4.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.
| ||||
| CsleRouteMetric | 1.3.6.1.4.1.6296.101.11.4.1.1.7 | INTEGER (-1..255) | RW | |
column · INTEGER (-1..255) · read-write · current The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's sleRouteProto value. If this metric is not used, its value should be set to -1. | ||||
| CsleRouteActive | 1.3.6.1.4.1.6296.101.11.4.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The active status for this routing entry.
| ||||
| CsleRouteBindingSrcAddr | 1.3.6.1.4.1.6296.101.11.4.1.1.9 | IpAddress | RO | |
column · IpAddress · read-only · current The binding source IP Address for this route. | ||||
| CsleRouteDistance | 1.3.6.1.4.1.6296.101.11.4.1.1.10 | INTEGER (1..255) | RW | |
column · INTEGER (1..255) · read-write · current The Distance value for this route. | ||||
| CsleRouteSubtype | 1.3.6.1.4.1.6296.101.11.4.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current The subtype of this route.
| ||||
| CsleRouteNexthopStatus | 1.3.6.1.4.1.6296.101.11.4.1.1.12 | Bits | RO | |
column · Bits · read-only · current The nexthop status of this route.
| ||||
| CsleRouteRibStatus | 1.3.6.1.4.1.6296.101.11.4.1.1.13 | Bits | RO | |
column · Bits · read-only · current The rib status for this route.
| ||||
| CsleRouteVRFIndex | 1.3.6.1.4.1.6296.101.11.4.1.1.14 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current VRF index in sleIpVRFTable. | ||||
| NsleRouteControl | 1.3.6.1.4.1.6296.101.11.4.2 | |||
| SsleRouteControlRequest | 1.3.6.1.4.1.6296.101.11.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleRouteControlStatus | 1.3.6.1.4.1.6296.101.11.4.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleRouteControlTimer | 1.3.6.1.4.1.6296.101.11.4.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleRouteControlTimeStamp | 1.3.6.1.4.1.6296.101.11.4.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleRouteControlReqResult | 1.3.6.1.4.1.6296.101.11.4.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command (end of command). | ||||
| SsleRouteControlDstAddress | 1.3.6.1.4.1.6296.101.11.4.2.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table-access mechanisms defined by the network management protocol in use. | ||||
| SsleRouteControlDstMask | 1.3.6.1.4.1.6296.101.11.4.2.7 | INTEGER (0..32) | RW | |
scalar · INTEGER (0..32) · read-write · current Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the sleRouteDstMask by determining whether the value of the correspondent sleRouteDstAddress field belong to a class-A, B, or C network. If the value of the sleRouteDstAddress is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. | ||||
| SsleRouteControlGateway | 1.3.6.1.4.1.6296.101.11.4.2.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid | ||||
| SsleRouteControlInterface | 1.3.6.1.4.1.6296.101.11.4.2.9 | INTEGER (0..11023) | RW | |
scalar · INTEGER (0..11023) · read-write · current Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index To config interface, sleRouteControlGateway have to be removed. | ||||
| SsleRouteControlBindingSrcAddr | 1.3.6.1.4.1.6296.101.11.4.2.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The binding source IP Address for this route. | ||||
| SsleRouteControlDistance | 1.3.6.1.4.1.6296.101.11.4.2.11 | INTEGER (1..255) | RW | |
scalar · INTEGER (1..255) · read-write · current The Distance value for this route. | ||||
| SsleRouteControlVRFIndex | 1.3.6.1.4.1.6296.101.11.4.2.12 | Integer32 (0..2147483647) | RW | |
scalar · Integer32 (0..2147483647) · read-write · current VRF index in sleIpVRFTable. | ||||
| NsleRouteNotification | 1.3.6.1.4.1.6296.101.11.4.3 | |||
| !sleRouteStaticCreated | 1.3.6.1.4.1.6296.101.11.4.3.1 | |||
notification · current createStaticRoute | ||||
| !sleRouteStaticDestroyed | 1.3.6.1.4.1.6296.101.11.4.3.2 | |||
notification · current destroyStaticRoute | ||||
| !sleRouteStaticProfileChanged | 1.3.6.1.4.1.6296.101.11.4.3.3 | |||
notification · current setStaticRouteProfile | ||||
| NsleDhcpClient | 1.3.6.1.4.1.6296.101.11.5 | |||
| TsleDhcpClTable | 1.3.6.1.4.1.6296.101.11.5.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleDhcpClEntry | 1.3.6.1.4.1.6296.101.11.5.1.1 | NA | ||
| CsleDhcpClMode | 1.3.6.1.4.1.6296.101.11.5.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current DHCP Client activity state in this interface.
| ||||
| CsleDhcpClIpAddr | 1.3.6.1.4.1.6296.101.11.5.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address acquired by DHCP Client active in this interface. | ||||
| CsleDhcpClNetmask | 1.3.6.1.4.1.6296.101.11.5.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The subnet mask associated with the IP address acquired by DHCP Client. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| CsleDhcpClGateway | 1.3.6.1.4.1.6296.101.11.5.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current The Gateway's IP address acquired by DHCP Client active in this interface. | ||||
| CsleDhcpClDnsServer | 1.3.6.1.4.1.6296.101.11.5.1.1.5 | IpAddress | RO | |
column · IpAddress · read-only · current The DNS server's IP address acquired by DHCP Client active in this interface. | ||||
| CsleDhcpClServer | 1.3.6.1.4.1.6296.101.11.5.1.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current DHCP Server's IP address. | ||||
| CsleDhcpClClientId | 1.3.6.1.4.1.6296.101.11.5.1.1.7 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address bindings. This value is expected to be unique for all clients in an administrative domain. | ||||
| CsleDhcpClClientIdStyle | 1.3.6.1.4.1.6296.101.11.5.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format
| ||||
| CsleDhcpClClassId | 1.3.6.1.4.1.6296.101.11.5.1.1.9 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a string of n octets, interpreted by servers. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration. | ||||
| CsleDhcpClClassIdStyle | 1.3.6.1.4.1.6296.101.11.5.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format
| ||||
| CsleDhcpClLeasetime | 1.3.6.1.4.1.6296.101.11.5.1.1.11 | Integer32 (120..2147483637) | RO | |
column · Integer32 (120..2147483637) · read-only · current The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s | ||||
| CsleDhcpClState | 1.3.6.1.4.1.6296.101.11.5.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The operating status of DHCP Client.
| ||||
| NsleDhcpClControl | 1.3.6.1.4.1.6296.101.11.5.2 | |||
| SsleDhcpClControlRequest | 1.3.6.1.4.1.6296.101.11.5.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleDhcpClControlStatus | 1.3.6.1.4.1.6296.101.11.5.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleDhcpClControlTimer | 1.3.6.1.4.1.6296.101.11.5.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleDhcpClControlTimeStamp | 1.3.6.1.4.1.6296.101.11.5.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The time stamp of the last command (end of command). | ||||
| SsleDhcpClControlReqResult | 1.3.6.1.4.1.6296.101.11.5.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The result of the last user command. | ||||
| SsleDhcpClControlNetIfIndex | 1.3.6.1.4.1.6296.101.11.5.2.6 | Integer32 (1..4094) | RW | |
scalar · Integer32 (1..4094) · read-write · current Network Interface Index. | ||||
| SsleDhcpClControlMode | 1.3.6.1.4.1.6296.101.11.5.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP Client activity state in this interface.
| ||||
| SsleDhcpClControlClientId | 1.3.6.1.4.1.6296.101.11.5.2.8 | OCTET STRING (SIZE (0..255)) | RW | |
scalar · OCTET STRING (SIZE (0..255)) · read-write · current DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address bindings. This value is expected to be unique for all clients in an administrative domain. | ||||
| SsleDhcpClControlClientIdStyle | 1.3.6.1.4.1.6296.101.11.5.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format
| ||||
| SsleDhcpClControlClassId | 1.3.6.1.4.1.6296.101.11.5.2.10 | OCTET STRING (SIZE (0..255)) | RW | |
scalar · OCTET STRING (SIZE (0..255)) · read-write · current DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a string of n octets, interpreted by servers. Vendors may choose to define specific vendor class identifiers to convey particular configuration or other identification information about a client. For example, the identifier may encode the client's hardware configuration. | ||||
| SsleDhcpClControlClassIdStyle | 1.3.6.1.4.1.6296.101.11.5.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format
| ||||
| SsleDhcpClControlLeasetime | 1.3.6.1.4.1.6296.101.11.5.2.12 | Integer32 (120..2147483637) | RW | |
scalar · Integer32 (120..2147483637) · read-write · current The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s | ||||
| SsleDhcpClControlUpdateIP | 1.3.6.1.4.1.6296.101.11.5.2.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Update DHCP client operating status. 0 : default 1 : renew 2 : release
| ||||
| NsleDhcpClNotification | 1.3.6.1.4.1.6296.101.11.5.3 | |||
| !sleDhcpClModeChanged | 1.3.6.1.4.1.6296.101.11.5.3.1 | |||
notification · current setDhcpClMode. | ||||
| !sleDhcpClProfileChanged | 1.3.6.1.4.1.6296.101.11.5.3.2 | |||
notification · current setDhcpClProfile. | ||||
| !sleDhcpClStateChanged | 1.3.6.1.4.1.6296.101.11.5.3.3 | |||
notification · current ChangeDhcpClState. | ||||
| NsleV2DhcpClient | 1.3.6.1.4.1.6296.101.11.6 | |||
| NsleNetworkBase | 1.3.6.1.4.1.6296.101.11.7 | |||
| NsleNetworkBaseInfo | 1.3.6.1.4.1.6296.101.11.7.1 | |||
| SsleNetworkArpAgingTime | 1.3.6.1.4.1.6296.101.11.7.1.1 | INTEGER (10..2147483637) | RO | |
scalar · INTEGER (10..2147483637) · read-only · current System Arp Aging Time | ||||
| SsleNetworkBaseVrfDynamicForwardBinding | 1.3.6.1.4.1.6296.101.11.7.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current Description.
| ||||
| NsleNetworkBaseControl | 1.3.6.1.4.1.6296.101.11.7.2 | |||
| SsleNetworkControlRequest | 1.3.6.1.4.1.6296.101.11.7.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleNetworkControlStatus | 1.3.6.1.4.1.6296.101.11.7.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleNetworkControlTimer | 1.3.6.1.4.1.6296.101.11.7.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleNetworkControlTimeStamp | 1.3.6.1.4.1.6296.101.11.7.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleNetworkControlReqResult | 1.3.6.1.4.1.6296.101.11.7.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleNetworkControlArpAgingTime | 1.3.6.1.4.1.6296.101.11.7.2.6 | INTEGER (10..2147483637) | RW | |
scalar · INTEGER (10..2147483637) · read-write · current Description. | ||||
| SsleNetworkControlVrfDynamicForwardBinding | 1.3.6.1.4.1.6296.101.11.7.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| NsleNetworkBaseNotification | 1.3.6.1.4.1.6296.101.11.7.3 | |||
| !sleNetworkArpProfileChanged | 1.3.6.1.4.1.6296.101.11.7.3.1 | |||
notification · current Description. | ||||
| NsleTunnel | 1.3.6.1.4.1.6296.101.11.8 | |||
| TsleTunnelIfTable | 1.3.6.1.4.1.6296.101.11.8.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleTunnelIfEntry | 1.3.6.1.4.1.6296.101.11.8.1.1 | NA | ||
| CsleTunnelIfIndex | 1.3.6.1.4.1.6296.101.11.8.1.1.1 | Integer32 (10000..11023) | RO | |
column · Integer32 (10000..11023) · read-only · current Tunnel interface index | ||||
| CsleTunnelIfLocalAddress | 1.3.6.1.4.1.6296.101.11.8.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. | ||||
| CsleTunnelIfRemoteAddress | 1.3.6.1.4.1.6296.101.11.8.1.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown. | ||||
| CsleTunnelIfMode | 1.3.6.1.4.1.6296.101.11.8.1.1.4 | IANAtunnelType | RO | |
column · IANAtunnelType · read-only · current The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal encapsulation l2tp(5) - L2TP encapsulation pptp(6) - PPTP encapsulation l2f(7) - L2F encapsulation udp(8) - UDP encapsulation atmp(9) - ATMP encapsulation msdp(10) - MSDP encapsulation sixToFour(11) - 6to4 encapsulation sixOverFour(12) - 6over4 encapsulation isatap(13) - ISATAP encapsulation teredo(14) - Teredo encapsulation | ||||
| CsleTunnelIfTTL | 1.3.6.1.4.1.6296.101.11.8.1.1.5 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current The TTL to use in the outer IP header. | ||||
| CsleTunnelIfDscpMode | 1.3.6.1.4.1.6296.101.11.8.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
| ||||
| CsleTunnelIfDscp | 1.3.6.1.4.1.6296.101.11.8.1.1.7 | Integer32 (0..63) | RO | |
column · Integer32 (0..63) · read-only · current The static DiffServ field value to use in the outer IP header. | ||||
| CsleTunnelIfKeepaliveInterval | 1.3.6.1.4.1.6296.101.11.8.1.1.8 | Integer32 (0..32767) | RO | |
column · Integer32 (0..32767) · read-only · current Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.) | ||||
| CsleTunnelIfKeepaliveRetry | 1.3.6.1.4.1.6296.101.11.8.1.1.9 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.) | ||||
| CsleTunnelIfPathMtuDiscovery | 1.3.6.1.4.1.6296.101.11.8.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Path mtu discovery on tunnel.
| ||||
| CsleTunnelIfVRFName | 1.3.6.1.4.1.6296.101.11.8.1.1.11 | OCTET STRING (SIZE (0..63)) | RO | |
column · OCTET STRING (SIZE (0..63)) · read-only · current VPN Routing/Forwarding instance name. | ||||
| CsleTunnelIfBindingPorts | 1.3.6.1.4.1.6296.101.11.8.1.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Tunnel binding ports map. | ||||
| CsleTunnelIfLocalAddress6 | 1.3.6.1.4.1.6296.101.11.8.1.1.13 | InetAddress | RO | |
column · InetAddress · read-only · current The address of the local endpoint of the tunnel for IPv6 | ||||
| CsleTunnelIfRemoteAddress6 | 1.3.6.1.4.1.6296.101.11.8.1.1.14 | InetAddress | RO | |
column · InetAddress · read-only · current The address of the remote endpoint of the tunnel for IPv6 | ||||
| CsleTunnelIfChecksum | 1.3.6.1.4.1.6296.101.11.8.1.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current A checksum feature for the tunnel.
| ||||
| CsleTunnelIfDmac | 1.3.6.1.4.1.6296.101.11.8.1.1.16 | MacAddress | RO | |
column · MacAddress · read-only · current A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.) | ||||
| CsleTunnelIfTos | 1.3.6.1.4.1.6296.101.11.8.1.1.17 | INTEGER (0..255) | RO | |
column · INTEGER (0..255) · read-only · current A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header. | ||||
| NsleTunnelIfControl | 1.3.6.1.4.1.6296.101.11.8.2 | |||
| SsleTunnelIfControlRequest | 1.3.6.1.4.1.6296.101.11.8.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleTunnelIfControlStatus | 1.3.6.1.4.1.6296.101.11.8.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleTunnelIfControlTimer | 1.3.6.1.4.1.6296.101.11.8.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleTunnelIfControlTimeStamp | 1.3.6.1.4.1.6296.101.11.8.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleTunnelIfControlReqResult | 1.3.6.1.4.1.6296.101.11.8.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command (end of command). | ||||
| SsleTunnelIfControlIndex | 1.3.6.1.4.1.6296.101.11.8.2.6 | Integer32 (10000..11023) | RW | |
scalar · Integer32 (10000..11023) · read-write · current Tunnel interface index | ||||
| SsleTunnelIfControlLocalAddress | 1.3.6.1.4.1.6296.101.11.8.2.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. | ||||
| SsleTunnelIfControlRemoteAddress | 1.3.6.1.4.1.6296.101.11.8.2.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown. | ||||
| SsleTunnelIfControlMode | 1.3.6.1.4.1.6296.101.11.8.2.9 | IANAtunnelType | RW | |
scalar · IANAtunnelType · read-write · current The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal encapsulation l2tp(5) - L2TP encapsulation pptp(6) - PPTP encapsulation l2f(7) - L2F encapsulation udp(8) - UDP encapsulation atmp(9) - ATMP encapsulation msdp(10) - MSDP encapsulation sixToFour(11) - 6to4 encapsulation sixOverFour(12) - 6over4 encapsulation isatap(13) - ISATAP encapsulation teredo(14) - Teredo encapsulation | ||||
| SsleTunnelIfControlTTL | 1.3.6.1.4.1.6296.101.11.8.2.10 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current The TTL to use in the outer IP header. | ||||
| SsleTunneIflControlDscpMode | 1.3.6.1.4.1.6296.101.11.8.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of dscpMapFromPacket indicates that the bit field is mapping dscp field of incoming packet. A value of dscpAssign indicates that the bit field is static DiffServ field value.
| ||||
| SsleTunneIflControlDscp | 1.3.6.1.4.1.6296.101.11.8.2.12 | Integer32 (0..63) | RW | |
scalar · Integer32 (0..63) · read-write · current The static DiffServ field value to use in the outer IP header. | ||||
| SsleTunnelIfControlKeepaliveInterval | 1.3.6.1.4.1.6296.101.11.8.2.13 | Integer32 (1..32767) | RW | |
scalar · Integer32 (1..32767) · read-write · current Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.) | ||||
| SsleTunneIflControlKeepaliveRetry | 1.3.6.1.4.1.6296.101.11.8.2.14 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This object is available for a gre tunnel only.) | ||||
| SsleTunnelIfControlPathMtuDiscovery | 1.3.6.1.4.1.6296.101.11.8.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Path mtu discovery on tunnel.
| ||||
| SsleTunnelIfControlVRFName | 1.3.6.1.4.1.6296.101.11.8.2.16 | OCTET STRING (SIZE (0..63)) | RW | |
scalar · OCTET STRING (SIZE (0..63)) · read-write · current VPN Routing/Forwarding instance name. | ||||
| SsleTunnelIfControlLocalAddress6 | 1.3.6.1.4.1.6296.101.11.8.2.17 | InetAddress | RW | |
scalar · InetAddress · read-write · current The address of the local endpoint of the tunnel for IPv6 | ||||
| SsleTunnelIfControlRemoteAddress6 | 1.3.6.1.4.1.6296.101.11.8.2.18 | InetAddress | RW | |
scalar · InetAddress · read-write · current The address of the remote endpoint of the tunnel for IPv6 | ||||
| SsleTunnelIfControlChecksum | 1.3.6.1.4.1.6296.101.11.8.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current A checksum feature for the tunnel.
| ||||
| SsleTunnelIfControlDmac | 1.3.6.1.4.1.6296.101.11.8.2.20 | MacAddress | RW | |
scalar · MacAddress · read-write · current A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.) | ||||
| SsleTunnelIfControlTos | 1.3.6.1.4.1.6296.101.11.8.2.21 | INTEGER (0..255) | RW | |
scalar · INTEGER (0..255) · read-write · current A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header. | ||||
| NsleTunnelIfNotification | 1.3.6.1.4.1.6296.101.11.8.3 | |||
| !sleTunnelIfCreated | 1.3.6.1.4.1.6296.101.11.8.3.1 | |||
notification · current Description. | ||||
| !sleTunnelIfDeleted | 1.3.6.1.4.1.6296.101.11.8.3.2 | |||
notification · current Description. | ||||
| !sleTunnelIfLocalAddressChanged | 1.3.6.1.4.1.6296.101.11.8.3.3 | |||
notification · current Description. | ||||
| !sleTunnelIfRemoteAddressChanged | 1.3.6.1.4.1.6296.101.11.8.3.4 | |||
notification · current Description. | ||||
| !sleTunnelIfModeChanged | 1.3.6.1.4.1.6296.101.11.8.3.5 | |||
notification · current Description. | ||||
| !sleTunnelIfTTLChanged | 1.3.6.1.4.1.6296.101.11.8.3.6 | |||
notification · current Description. | ||||
| !sleTunnelIfDscpChanged | 1.3.6.1.4.1.6296.101.11.8.3.7 | |||
notification · current Description. | ||||
| !sleTunnelIfKeepaliveChanged | 1.3.6.1.4.1.6296.101.11.8.3.8 | |||
notification · current Description. | ||||
| !sleTunnelIfPathMtuDiscoveryChanged | 1.3.6.1.4.1.6296.101.11.8.3.9 | |||
notification · current Description. | ||||
| !sleTunnelIfVRFNameSet | 1.3.6.1.4.1.6296.101.11.8.3.10 | |||
notification · current Description. | ||||
| !sleTunnelIfVRFNameUnset | 1.3.6.1.4.1.6296.101.11.8.3.11 | |||
notification · current Description. | ||||
| !sleTunnelIfLocalAddress6Changed | 1.3.6.1.4.1.6296.101.11.8.3.12 | |||
notification · current setTunnelLocalAddr6 | ||||
| !sleTunnelIfRemoteAddress6Changed | 1.3.6.1.4.1.6296.101.11.8.3.13 | |||
notification · current setTunnelRemoteAddr6 | ||||
| TsleTunnelAddressTable | 1.3.6.1.4.1.6296.101.11.8.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleTunnelAddressEntry | 1.3.6.1.4.1.6296.101.11.8.4.1 | NA | ||
| CsleTunnelAddressValue | 1.3.6.1.4.1.6296.101.11.8.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address to which this entry's addressing information pertains. | ||||
| CsleTunnelAddressMask | 1.3.6.1.4.1.6296.101.11.8.4.1.2 | Integer32 (1..128) | RO | |
column · Integer32 (1..128) · read-only · current The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| CsleTunnelIpAddrBcast | 1.3.6.1.4.1.6296.101.11.8.4.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current Description. | ||||
| CsleTunnelAddressFlag | 1.3.6.1.4.1.6296.101.11.8.4.1.4 | Bits | RO | |
column · Bits · read-only · current dynamic: ~ permanent primary : ~ secondary anycast: this bit is available for ipv6 only. The others are available for ipv4 only.
| ||||
| CsleTunnelAddressScope | 1.3.6.1.4.1.6296.101.11.8.4.1.5 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current default : global In linux, 200 - site 0 - global 1..252 - scopeNUM 253 - link 254 - host 255 - nowhere | ||||
| CsleTunnelAddressUnnumIfIndex | 1.3.6.1.4.1.6296.101.11.8.4.1.6 | INTEGER (1..4094) | RO | |
column · INTEGER (1..4094) · read-only · current The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200) | ||||
| CsleTunnelAddressUnnumIpIndex | 1.3.6.1.4.1.6296.101.11.8.4.1.7 | INTEGER (0 | 2..1024) | RO | |
column · INTEGER (0 | 2..1024) · read-only · current The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024) | ||||
| NsleTunnelAddressControl | 1.3.6.1.4.1.6296.101.11.8.5 | |||
| SsleTunnelAddressControlRequest | 1.3.6.1.4.1.6296.101.11.8.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleTunnelAddressControlStatus | 1.3.6.1.4.1.6296.101.11.8.5.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleTunnelAddressControlTimer | 1.3.6.1.4.1.6296.101.11.8.5.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleTunnelAddressControlTimeStamp | 1.3.6.1.4.1.6296.101.11.8.5.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleTunnelAddressControlReqResult | 1.3.6.1.4.1.6296.101.11.8.5.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command (end of command). | ||||
| SsleTunnelAddressControlTunnelIfIndex | 1.3.6.1.4.1.6296.101.11.8.5.6 | Integer32 (10000..11023) | RW | |
scalar · Integer32 (10000..11023) · read-write · current Tunnel interface index | ||||
| SsleTunnelAddressControlValue | 1.3.6.1.4.1.6296.101.11.8.5.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The IP address to which this entry's addressing information pertains. | ||||
| SsleTunnelAddressControlMask | 1.3.6.1.4.1.6296.101.11.8.5.8 | Integer32 (1..128) | RW | |
scalar · Integer32 (1..128) · read-write · current The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| SsleTunnelAddressControlFlag | 1.3.6.1.4.1.6296.101.11.8.5.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current default : primary
| ||||
| SsleTunnelAddressControlScope | 1.3.6.1.4.1.6296.101.11.8.5.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current default : global not applicable : nowhere
| ||||
| SsleTunnelAddressControlUnnumIfIndex | 1.3.6.1.4.1.6296.101.11.8.5.11 | INTEGER (1..4094) | RW | |
scalar · INTEGER (1..4094) · read-write · current The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200) | ||||
| SsleTunnelAddressControlUnnumIpIndex | 1.3.6.1.4.1.6296.101.11.8.5.12 | INTEGER (0 | 2..1024) | RW | |
scalar · INTEGER (0 | 2..1024) · read-write · current The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip address of a specific interface. Interface unnumbered default setting - it get primary ip address. Interface unnumbered enhanced setting - it get secondary ip address with ip-index. (cf. primary ip address's ip-index : 1. no setting: 0. other setting: 2-1024) | ||||
| NsleTunnelAddressNotification | 1.3.6.1.4.1.6296.101.11.8.6 | |||
| !sleTunnelAddressCreated | 1.3.6.1.4.1.6296.101.11.8.6.1 | |||
| !sleTunnelAddressDeleted | 1.3.6.1.4.1.6296.101.11.8.6.2 | |||
notification · current Description. | ||||
| !sleTunnelAddressUnnumChanged | 1.3.6.1.4.1.6296.101.11.8.6.3 | |||
notification · current setIfUnnumbered | ||||
| !sleTunnelAddressUnnumDeleted | 1.3.6.1.4.1.6296.101.11.8.6.4 | |||
notification · current delIfUnnumbered | ||||
| NsleIpVRF | 1.3.6.1.4.1.6296.101.11.9 | |||
| TsleIpVRFTable | 1.3.6.1.4.1.6296.101.11.9.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleIpVRFEntry | 1.3.6.1.4.1.6296.101.11.9.1.1 | NA | ||
| CsleIpVRFIndex | 1.3.6.1.4.1.6296.101.11.9.1.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current VRF index. | ||||
| CsleIpVRFName | 1.3.6.1.4.1.6296.101.11.9.1.1.2 | OCTET STRING (SIZE (0..63)) | RO | |
column · OCTET STRING (SIZE (0..63)) · read-only · current VRF name. | ||||
| CsleIpVRFDesignatedPorts | 1.3.6.1.4.1.6296.101.11.9.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The port map of VRF designated-port. | ||||
| CsleIpVRFRouterId | 1.3.6.1.4.1.6296.101.11.9.1.1.4 | IpAddress | RO | |
column · IpAddress · read-only · current Router-Identifier | ||||
| CsleIpVRFDescription | 1.3.6.1.4.1.6296.101.11.9.1.1.5 | OCTET STRING (SIZE (0..128)) | RO | |
column · OCTET STRING (SIZE (0..128)) · read-only · current The description of VRF. | ||||
| NsleIpVRFControl | 1.3.6.1.4.1.6296.101.11.9.2 | |||
| SsleIpVRFControlRequest | 1.3.6.1.4.1.6296.101.11.9.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleIpVRFControlStatus | 1.3.6.1.4.1.6296.101.11.9.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleIpVRFControlTimer | 1.3.6.1.4.1.6296.101.11.9.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleIpVRFControlTimeStamp | 1.3.6.1.4.1.6296.101.11.9.2.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleIpVRFControlReqResult | 1.3.6.1.4.1.6296.101.11.9.2.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command (end of command). | ||||
| SsleIpVRFControlName | 1.3.6.1.4.1.6296.101.11.9.2.6 | OCTET STRING (SIZE (0..63)) | RW | |
scalar · OCTET STRING (SIZE (0..63)) · read-write · current VRF name | ||||
| SsleIpVRFControlDesignatedPorts | 1.3.6.1.4.1.6296.101.11.9.2.7 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The port map of VRF designated-port. | ||||
| SsleIpVRFControlRouterId | 1.3.6.1.4.1.6296.101.11.9.2.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current Router-Identifier | ||||
| SsleIpVRFControlDescription | 1.3.6.1.4.1.6296.101.11.9.2.9 | OCTET STRING (SIZE (0..128)) | RW | |
scalar · OCTET STRING (SIZE (0..128)) · read-write · current The description of VRF. | ||||
| NsleIpVRFNotification | 1.3.6.1.4.1.6296.101.11.9.3 | |||
| !sleIpVRFCreated | 1.3.6.1.4.1.6296.101.11.9.3.1 | |||
notification · current Description. | ||||
| !sleIpVRFDeleted | 1.3.6.1.4.1.6296.101.11.9.3.2 | |||
notification · current Description. | ||||
| !sleIpVRFDesignatedPortsSet | 1.3.6.1.4.1.6296.101.11.9.3.3 | |||
notification · current Description. | ||||
| !sleIpVRFDesignatedPortsUnset | 1.3.6.1.4.1.6296.101.11.9.3.4 | |||
notification · current Description. | ||||
| !sleIpVRFRouterIdChanged | 1.3.6.1.4.1.6296.101.11.9.3.5 | |||
notification · current Description. | ||||
| !sleIpVRFDescriptionChanged | 1.3.6.1.4.1.6296.101.11.9.3.6 | |||
notification · current Description. | ||||
| TsleIpVRFSelectionSourceTable | 1.3.6.1.4.1.6296.101.11.9.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleIpVRFSelectionSourceEntry | 1.3.6.1.4.1.6296.101.11.9.4.1 | NA | ||
| CsleIpVRFSelectionSrcIndex | 1.3.6.1.4.1.6296.101.11.9.4.1.1 | INTEGER (1..1024) | RO | |
column · INTEGER (1..1024) · read-only · current VRF selection source index. | ||||
| CsleIpVRFSelectionSrcAddr | 1.3.6.1.4.1.6296.101.11.9.4.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current VRF selection by source IP address. | ||||
| CsleIpVRFSelectionSrcMask | 1.3.6.1.4.1.6296.101.11.9.4.1.3 | Integer32 (1..32) | RO | |
column · Integer32 (1..32) · read-only · current The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| CsleIpVRFSelectionSrcVRFName | 1.3.6.1.4.1.6296.101.11.9.4.1.4 | OCTET STRING (SIZE (0..63)) | RO | |
column · OCTET STRING (SIZE (0..63)) · read-only · current VPN Routing/Forwarding instance name. | ||||
| NsleIpVRFSelectionSourceControl | 1.3.6.1.4.1.6296.101.11.9.5 | |||
| SsleIpVRFSelectionSrcControlRequest | 1.3.6.1.4.1.6296.101.11.9.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleIpVRFSelectionSrcControlStatus | 1.3.6.1.4.1.6296.101.11.9.5.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of a user command. | ||||
| SsleIpVRFSelectionSrcControlTimer | 1.3.6.1.4.1.6296.101.11.9.5.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum wait time for the manager for a long running user command. | ||||
| SsleIpVRFSelectionSrcControlTimeStamp | 1.3.6.1.4.1.6296.101.11.9.5.4 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleIpVRFSelectionSrcControlReqResult | 1.3.6.1.4.1.6296.101.11.9.5.5 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command (end of command). | ||||
| SsleIpVRFSelectionSrcControlAddr | 1.3.6.1.4.1.6296.101.11.9.5.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current VRF selection by source IP address. | ||||
| SsleIpVRFSelectionSrcControlMask | 1.3.6.1.4.1.6296.101.11.9.5.7 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. | ||||
| SsleIpVRFSelectionSrcControlVRFName | 1.3.6.1.4.1.6296.101.11.9.5.8 | OCTET STRING (SIZE (0..63)) | RW | |
scalar · OCTET STRING (SIZE (0..63)) · read-write · current VPN Routing/Forwarding instance name. | ||||
| NsleIpVRFSelectionSourceNotification | 1.3.6.1.4.1.6296.101.11.9.6 | |||
| !sleIpVRFSelectionSrcSet | 1.3.6.1.4.1.6296.101.11.9.6.1 | |||
notification · current Description. | ||||
| !sleIpVRFSelectionSrcUnset | 1.3.6.1.4.1.6296.101.11.9.6.2 | |||
notification · current Description. | ||||
| NsleBFD | 1.3.6.1.4.1.6296.101.11.10 | |||
| NsleBFDBase | 1.3.6.1.4.1.6296.101.11.10.1 | |||
| NsleBFDBaseInfo | 1.3.6.1.4.1.6296.101.11.10.1.1 | |||
| SsleBFDEnable | 1.3.6.1.4.1.6296.101.11.10.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current BFD fast-detect is enabled or disabled.
| ||||
| SsleBFDEchoEnable | 1.3.6.1.4.1.6296.101.11.10.1.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current BFD Echo function is enabled or disabled.
| ||||
| SsleBFDSlowTimer | 1.3.6.1.4.1.6296.101.11.10.1.1.3 | INTEGER (1000..30000) | RO | |
scalar · INTEGER (1000..30000) · read-only · current BFD Slow Timer in unit of milliseconds default: 1000(ms) | ||||
| NsleBFDBaseControl | 1.3.6.1.4.1.6296.101.11.10.1.2 | |||
| SsleBFDControlRequest | 1.3.6.1.4.1.6296.101.11.10.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleBFDControlStatus | 1.3.6.1.4.1.6296.101.11.10.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleBFDControlTimer | 1.3.6.1.4.1.6296.101.11.10.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleBFDControlTimeStamp | 1.3.6.1.4.1.6296.101.11.10.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleBFDControlReqResult | 1.3.6.1.4.1.6296.101.11.10.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleBFDControlEnable | 1.3.6.1.4.1.6296.101.11.10.1.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current BFD fast-detect is enabled or disabled.
| ||||
| SsleBFDControlEchoEnable | 1.3.6.1.4.1.6296.101.11.10.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current BFD Echo function is enabled or disabled.
| ||||
| SsleBFDControlSlowTimer | 1.3.6.1.4.1.6296.101.11.10.1.2.8 | INTEGER (1000..30000) | RW | |
scalar · INTEGER (1000..30000) · read-write · current BFD Slow Timer in unit of milliseconds default: 1000(ms) | ||||
| NsleBFDBaseNotification | 1.3.6.1.4.1.6296.101.11.10.1.3 | |||
| !sleBFDBaseProfileChanged | 1.3.6.1.4.1.6296.101.11.10.1.3.1 | |||
notification · current Description. | ||||
| NsleBFDInterface | 1.3.6.1.4.1.6296.101.11.10.2 | |||
| TsleBFDInterfaceTable | 1.3.6.1.4.1.6296.101.11.10.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBFDInterfaceEntry | 1.3.6.1.4.1.6296.101.11.10.2.1.1 | NA | ||
| CsleBFDIfRxInterval | 1.3.6.1.4.1.6296.101.11.10.2.1.1.1 | INTEGER (50..10000) | RO | |
column · INTEGER (50..10000) · read-only · current Required Min Rx Interval of BFD control packet in this interface. default: 50(ms) | ||||
| CsleBFDIfTxInterval | 1.3.6.1.4.1.6296.101.11.10.2.1.1.2 | INTEGER (50..10000) | RO | |
column · INTEGER (50..10000) · read-only · current Required Min Tx Interval of BFD control packet in this interface. default: 50(ms) | ||||
| CsleBFDIfDetectMulti | 1.3.6.1.4.1.6296.101.11.10.2.1.1.3 | INTEGER (3..255) | RO | |
column · INTEGER (3..255) · read-only · current Detect Multi value of BFD control packet in this interface. default: 3 | ||||
| CsleBFDIfRxIntervalIPv6 | 1.3.6.1.4.1.6296.101.11.10.2.1.1.4 | Integer32 (50..1000) | RO | |
column · Integer32 (50..1000) · read-only · current Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms) | ||||
| CsleBFDIfTxIntervalIJPv6 | 1.3.6.1.4.1.6296.101.11.10.2.1.1.5 | Integer32 (50..1000) | RO | |
column · Integer32 (50..1000) · read-only · current Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms) | ||||
| CsleBFDIfDetectMultiIPv6 | 1.3.6.1.4.1.6296.101.11.10.2.1.1.6 | Integer32 (3..50) | RO | |
column · Integer32 (3..50) · read-only · current Detect Multi value of IPv6 BFD control packet in this interface. default: 3 | ||||
| NsleBFDInterfaceControl | 1.3.6.1.4.1.6296.101.11.10.2.2 | |||
| SsleBFDIfControlRequest | 1.3.6.1.4.1.6296.101.11.10.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleBFDIfControlStatus | 1.3.6.1.4.1.6296.101.11.10.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleBFDIfControlTimer | 1.3.6.1.4.1.6296.101.11.10.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleBFDIfControlTimeStamp | 1.3.6.1.4.1.6296.101.11.10.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleBFDIfControlReqResult | 1.3.6.1.4.1.6296.101.11.10.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command. | ||||
| SsleBFDIfControlNetIfIndex | 1.3.6.1.4.1.6296.101.11.10.2.2.6 | Integer32 (0..4097) | RW | |
scalar · Integer32 (0..4097) · read-write · current BFD Interface Index. | ||||
| SsleBFDIfControlRxInterval | 1.3.6.1.4.1.6296.101.11.10.2.2.7 | INTEGER (50..10000) | RW | |
scalar · INTEGER (50..10000) · read-write · current Required Min Rx Interval of BFD control packet in this interface. default: 50(ms) | ||||
| SsleBFDIfControlTxInterval | 1.3.6.1.4.1.6296.101.11.10.2.2.8 | INTEGER (50..10000) | RW | |
scalar · INTEGER (50..10000) · read-write · current Required Min Tx Interval of BFD control packet in this interface. default: 50(ms) | ||||
| SsleBFDIfControlDetectMulti | 1.3.6.1.4.1.6296.101.11.10.2.2.9 | INTEGER (3..255) | RW | |
scalar · INTEGER (3..255) · read-write · current Detect Multi value of BFD control packet in this interface. default: 3 | ||||
| SsleBFDIfControlRxIntervalIPv6 | 1.3.6.1.4.1.6296.101.11.10.2.2.10 | Integer32 (50..1000) | RW | |
scalar · Integer32 (50..1000) · read-write · current Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms) | ||||
| SsleBFDIfControlTxIntervalIPv6 | 1.3.6.1.4.1.6296.101.11.10.2.2.11 | Integer32 (50..1000) | RW | |
scalar · Integer32 (50..1000) · read-write · current Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms) | ||||
| SsleBFDIfControlDetectMultiIPv6 | 1.3.6.1.4.1.6296.101.11.10.2.2.12 | Integer32 (3..50) | RW | |
scalar · Integer32 (3..50) · read-write · current Detect Multi value of IPv6 BFD control packet in this interface. default: 3 | ||||
| NsleBFDInterfaceNotification | 1.3.6.1.4.1.6296.101.11.10.2.3 | |||
| !sleBFDIfProfileChanged | 1.3.6.1.4.1.6296.101.11.10.2.3.1 | |||
notification · current Description. | ||||
| NsleBFDSession | 1.3.6.1.4.1.6296.101.11.10.3 | |||
| NsleBFDSessionInfo | 1.3.6.1.4.1.6296.101.11.10.3.1 | |||
| TsleBFDSessionInfoTable | 1.3.6.1.4.1.6296.101.11.10.3.1.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBFDSessionInfoEntry | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleBFDSessionNeighAddrType | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.1 | InetAddressType | RO | |
column · InetAddressType · read-only · current Type of Neighbor Address referred to this session | ||||
| CsleBFDSessionNeighAddrValue | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.2 | InetAddress | RO | |
column · InetAddress · read-only · current Value of Neighbor Address referred to this session. | ||||
| CsleBFDSessionRegProtocols | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.3 | Bits | RO | |
column · Bits · read-only · current Value of Neighbor Address referred to this session.
| ||||
| CsleBFDSessionLocalDiscr | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Discriminator of this session. | ||||
| CsleBFDSessionRemoteDiscr | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Discriminator of remote session neighboring this session. | ||||
| CsleBFDSessionDetecMultiplier | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.6 | INTEGER (1..63) | RO | |
column · INTEGER (1..63) · read-only · current Detect Multiplier value which this session used. default: 3 | ||||
| CsleBFDSessionStatus | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status of this session. AdminDown(0) is same as disabled(4).
| ||||
| CsleBFDSessionEchoUsage | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Determine whether this session use or not echo function.
| ||||
| CsleBFDSessionUptime | 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.9 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time since this session¡¯s status changed into ¡®Up¡¯. | ||||
| NsleBFDSessionStats | 1.3.6.1.4.1.6296.101.11.10.3.2 | |||
| TsleBFDSessionStatsTable | 1.3.6.1.4.1.6296.101.11.10.3.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBFDSessionStatsEntry | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleBFDSessionStatsHolddownTime | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Type of Neighbor Address referred to this session. | ||||
| CsleBFDSessionStatsHolddownExpires | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The time remaining before this entry change into down status without receiving hello in unit of milliseconds. | ||||
| CsleBFDSessionStatsHolddownHitCount | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Hit Count whose this session status chang into down. | ||||
| CsleBFDSessionStatsHelloTime | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The time is when it expects next hello, after receiving that in unit of milliseconds. | ||||
| CsleBFDSessionStatsHelloHitCount | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Hit Count whose this session received. | ||||
| CsleBFDSessionStatsRxCount | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Hit Count whose this session received control packet. | ||||
| CsleBFDSessionStatsRxAvgInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Average interval whose this session received control packet. | ||||
| CsleBFDSessionStatsRxMinInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Minimum interval whose this session received control packet. | ||||
| CsleBFDSessionStatsRxMaxInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum interval whose this session received control packet. | ||||
| CsleBFDSessionStatsTxCount | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Hit Count whose this session send control packet. | ||||
| CsleBFDSessionStatsTxAvgInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Average interval whose this session sent control packet. | ||||
| CsleBFDSessionStatsTxMinInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Minimum interval whose this session sent control packet. | ||||
| CsleBFDSessionStatsTxMaxInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum interval whose this session received control packet. | ||||
| CsleBFDSessionStatsEchoRxCount | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Hit Count whose this session received echo packet | ||||
| CsleBFDSessionStatsEchoRxAvgInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Average interval whose this session received echo packet | ||||
| CsleBFDSessionStatsEchoRxMinInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Minimum interval whose this session received echo packet | ||||
| CsleBFDSessionStatsEchoRxMaxInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum interval whose this session received echo packet | ||||
| CsleBFDSessionStatsEchoTxCount | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Hit Count whose this session send echo packet | ||||
| CsleBFDSessionStatsEchoTxAvgInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Average interval whose this session sent echo packet. | ||||
| CsleBFDSessionStatsEchoTxMinInterva | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.20 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Minimum interval whose this session sent echo packet. | ||||
| CsleBFDSessionStatsEchoTxMaxInterval | 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.21 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Maximum interval whose this session received echo packet. | ||||
| NsleBFDSessionLocal | 1.3.6.1.4.1.6296.101.11.10.3.3 | |||
| TsleBFDSessionLocalTable | 1.3.6.1.4.1.6296.101.11.10.3.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBFDSessionLocalEntry | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleBFDSessionLocalDiag | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Value of State field of this session¡¯s control packet.
| ||||
| CsleBFDSessionLocalState | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Value of Diag field of this session¡¯s control packet
| ||||
| CsleBFDSessionLocalFlags | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.3 | Bits | RO | |
column · Bits · read-only · current Value of Flags field of this session¡¯s control packet.
| ||||
| CsleBFDSessionLocalMultiplier | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.4 | INTEGER (1..63) | RO | |
column · INTEGER (1..63) · read-only · current Value of MinTxInterval field of this session¡¯s control packet in unit of microseconds. | ||||
| CsleBFDSessionLocalMinTxInterval | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Value of MinTxInterval field of this session¡¯s control packet in unit of microseconds. | ||||
| CsleBFDSessionLocalMinRxInterval | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Value of MinRxInterval field of this session¡¯s control packet in unit of microseconds. | ||||
| CsleBFDSessionLocalMinEchoInterval | 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Value of MinEchoInterval field of this session¡¯s control packet in unit of microseconds. | ||||
| NsleBFDSessionRemote | 1.3.6.1.4.1.6296.101.11.10.3.4 | |||
| TsleBFDSessionRemoteTable | 1.3.6.1.4.1.6296.101.11.10.3.4.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBFDSessionRemoteEntry | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleBFDSessionRemoteDiag | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Value of State field of remote session¡¯s control packet.
| ||||
| CsleBFDSessionRemoteState | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Value of Diag field of remote session¡¯s control packet
| ||||
| CsleBFDSessionremoteFlags | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.3 | Bits | RO | |
column · Bits · read-only · current Value of Flags field of remote session¡¯s control packet.
| ||||
| CsleBFDSessionRemoteMultiplier | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.4 | INTEGER (1..63) | RO | |
column · INTEGER (1..63) · read-only · current Value of MinTxInterval field of this session¡¯s control packet in unit of microseconds. | ||||
| CsleBFDSessionRemoteMinTxInterval | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Value of MinTxInterval field of remote session¡¯s control packet in unit of microseconds. | ||||
| CsleBFDSessionRemoteMinRxInterval | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Value of MinRxInterval field of remote session¡¯s control packet in unit of microseconds. | ||||
| CsleBFDSessionRemoteMinEchoInterval | 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Value of MinEchoInterval field of remote session¡¯s control packet in unit of microseconds. | ||||
| NsleBFDStaticGw | 1.3.6.1.4.1.6296.101.11.10.4 | |||
| TsleBFDStaticGwTable | 1.3.6.1.4.1.6296.101.11.10.4.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBFDStaticGwEntry | 1.3.6.1.4.1.6296.101.11.10.4.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleBFDStaticGwAddrType | 1.3.6.1.4.1.6296.101.11.10.4.1.1.1 | InetAddressType | RW | |
column · InetAddressType · read-write · current The BFD static Gateway address type. Only ipv4(1). | ||||
| CsleBFDStaticGwAddr | 1.3.6.1.4.1.6296.101.11.10.4.1.1.2 | InetAddress | RW | |
column · InetAddress · read-write · current The BFD static Gateway address. 4bytes | ||||
| NsleBFDStaticGwControl | 1.3.6.1.4.1.6296.101.11.10.4.2 | |||
| SsleBFDStaticGwControlRequest | 1.3.6.1.4.1.6296.101.11.10.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleBFDStaticGwControlStatus | 1.3.6.1.4.1.6296.101.11.10.4.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleBFDStaticGwControlTimer | 1.3.6.1.4.1.6296.101.11.10.4.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleBFDStaticGwControlTimeStamp | 1.3.6.1.4.1.6296.101.11.10.4.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleBFDStaticGwControlReqResult | 1.3.6.1.4.1.6296.101.11.10.4.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleBFDStaticGwControlNetIfIndex | 1.3.6.1.4.1.6296.101.11.10.4.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBFDStaticGwControlGwAddrType | 1.3.6.1.4.1.6296.101.11.10.4.2.7 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current Description. | ||||
| SsleBFDStaticGwControlGwAddr | 1.3.6.1.4.1.6296.101.11.10.4.2.8 | InetAddress | RW | |
scalar · InetAddress · read-write · current Description. | ||||
| NsleBFDStaticGwNotification | 1.3.6.1.4.1.6296.101.11.10.4.3 | |||
| !sleBFDStaticGwAdded | 1.3.6.1.4.1.6296.101.11.10.4.3.1 | |||
notification · current Description. | ||||
| !sleBFDStaticGwDeleted | 1.3.6.1.4.1.6296.101.11.10.4.3.2 | |||
notification · current Description. | ||||
| GsleNetworkGroup | 1.3.6.1.4.1.6296.101.11.14 | |||
group · current Description.
| ||||
| GsleNetworkNotificationGroup | 1.3.6.1.4.1.6296.101.11.15 | |||
group · current Description.
| ||||
Traps / Notifications
- sleArpEntryCreated
1.3.6.1.4.1.6296.101.11.3.3.1 - sleArpEntryDestroyed
1.3.6.1.4.1.6296.101.11.3.3.2 - sleArpTableCleared
1.3.6.1.4.1.6296.101.11.3.3.3 - sleArpTableClearedByAddr
1.3.6.1.4.1.6296.101.11.3.3.4 - sleBFDBaseProfileChanged
1.3.6.1.4.1.6296.101.11.10.1.3.1 - sleBFDIfProfileChanged
1.3.6.1.4.1.6296.101.11.10.2.3.1 - sleBFDStaticGwAdded
1.3.6.1.4.1.6296.101.11.10.4.3.1 - sleBFDStaticGwDeleted
1.3.6.1.4.1.6296.101.11.10.4.3.2 - sleDhcpClModeChanged
1.3.6.1.4.1.6296.101.11.5.3.1 - sleDhcpClProfileChanged
1.3.6.1.4.1.6296.101.11.5.3.2 - sleDhcpClStateChanged
1.3.6.1.4.1.6296.101.11.5.3.3 - sleIpAddressCreated
1.3.6.1.4.1.6296.101.11.2.3.1 - sleIpAddressDestroyed
1.3.6.1.4.1.6296.101.11.2.3.2 - sleIpAddressIpIndexAdded
1.3.6.1.4.1.6296.101.11.2.3.3 - sleIpAddressIpIndexDeleted
1.3.6.1.4.1.6296.101.11.2.3.4 - sleIpVRFCreated
1.3.6.1.4.1.6296.101.11.9.3.1 - sleIpVRFDeleted
1.3.6.1.4.1.6296.101.11.9.3.2 - sleIpVRFDescriptionChanged
1.3.6.1.4.1.6296.101.11.9.3.6 - sleIpVRFDesignatedPortsSet
1.3.6.1.4.1.6296.101.11.9.3.3 - sleIpVRFDesignatedPortsUnset
1.3.6.1.4.1.6296.101.11.9.3.4 - sleIpVRFRouterIdChanged
1.3.6.1.4.1.6296.101.11.9.3.5 - sleIpVRFSelectionSrcSet
1.3.6.1.4.1.6296.101.11.9.6.1 - sleIpVRFSelectionSrcUnset
1.3.6.1.4.1.6296.101.11.9.6.2 - sleNetIfAliasChanged
1.3.6.1.4.1.6296.101.11.1.3.10 - sleNetIfArpMCProbeCountChanged
1.3.6.1.4.1.6296.101.11.1.3.12 - sleNetIfArpRetransTimeChanged
1.3.6.1.4.1.6296.101.11.1.3.14 - sleNetIfArpUCProbeCountChanged
1.3.6.1.4.1.6296.101.11.1.3.13 - sleNetIfBindingVRFSet
1.3.6.1.4.1.6296.101.11.1.3.4 - sleNetIfBindingVRFUnset
1.3.6.1.4.1.6296.101.11.1.3.5 - sleNetIfIpArpAliasChanged
1.3.6.1.4.1.6296.101.11.1.3.11 - sleNetIfIpForwardingChanged
1.3.6.1.4.1.6296.101.11.1.3.9 - sleNetIfIpMartianFilterChanged
1.3.6.1.4.1.6296.101.11.1.3.3 - sleNetIfIpOnFailUseVRFChanged
1.3.6.1.4.1.6296.101.11.1.3.6 - sleNetIfIpProxyArpChanged
1.3.6.1.4.1.6296.101.11.1.3.15 - sleNetIfIpRPFilterChanged
1.3.6.1.4.1.6296.101.11.1.3.16 - sleNetIfIpRedirectsChanged
1.3.6.1.4.1.6296.101.11.1.3.8 - sleNetIfIpUnreachabilityChanged
1.3.6.1.4.1.6296.101.11.1.3.7 - sleNetIfProfileChanged
1.3.6.1.4.1.6296.101.11.1.3.2 - sleNetIfRPFilterChanged
1.3.6.1.4.1.6296.101.11.1.3.17 - sleNetIfRegStateChanged
1.3.6.1.4.1.6296.101.11.1.3.1 - sleNetIfRouteMapChanged
1.3.6.1.4.1.6296.101.11.1.3.18 - sleNetworkArpProfileChanged
1.3.6.1.4.1.6296.101.11.7.3.1 - sleRouteStaticCreated
1.3.6.1.4.1.6296.101.11.4.3.1 - sleRouteStaticDestroyed
1.3.6.1.4.1.6296.101.11.4.3.2 - sleRouteStaticProfileChanged
1.3.6.1.4.1.6296.101.11.4.3.3 - sleTunnelAddressCreated
1.3.6.1.4.1.6296.101.11.8.6.1 - sleTunnelAddressDeleted
1.3.6.1.4.1.6296.101.11.8.6.2 - sleTunnelAddressUnnumChanged
1.3.6.1.4.1.6296.101.11.8.6.3 - sleTunnelAddressUnnumDeleted
1.3.6.1.4.1.6296.101.11.8.6.4 - sleTunnelIfCreated
1.3.6.1.4.1.6296.101.11.8.3.1 - sleTunnelIfDeleted
1.3.6.1.4.1.6296.101.11.8.3.2 - sleTunnelIfDscpChanged
1.3.6.1.4.1.6296.101.11.8.3.7 - sleTunnelIfKeepaliveChanged
1.3.6.1.4.1.6296.101.11.8.3.8 - sleTunnelIfLocalAddress6Changed
1.3.6.1.4.1.6296.101.11.8.3.12 - sleTunnelIfLocalAddressChanged
1.3.6.1.4.1.6296.101.11.8.3.3 - sleTunnelIfModeChanged
1.3.6.1.4.1.6296.101.11.8.3.5 - sleTunnelIfPathMtuDiscoveryChanged
1.3.6.1.4.1.6296.101.11.8.3.9 - sleTunnelIfRemoteAddress6Changed
1.3.6.1.4.1.6296.101.11.8.3.13 - sleTunnelIfRemoteAddressChanged
1.3.6.1.4.1.6296.101.11.8.3.4 - sleTunnelIfTTLChanged
1.3.6.1.4.1.6296.101.11.8.3.6 - sleTunnelIfVRFNameSet
1.3.6.1.4.1.6296.101.11.8.3.10 - sleTunnelIfVRFNameUnset
1.3.6.1.4.1.6296.101.11.8.3.11