SLE-ISIS-MIB
DASAN Co.,LTD.This MIB contains information about RIP version 2.
snmptranslate -m SLE-ISIS-MIB -Tpsnmpwalk -v2c -c <community> -m SLE-ISIS-MIB <host> 1.3.6.1.4.1.6296.101.56Imports
| DASAN-SMI | sleMgmt |
|---|---|
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsleISIS | 1.3.6.1.4.1.6296.101.56 | |||
identity This MIB contains information about RIP version 2. | ||||
| NsleISISBase | 1.3.6.1.4.1.6296.101.56.1 | |||
| NsleISISBaseInfo | 1.3.6.1.4.1.6296.101.56.1.1 | |||
| SsleISISRestartSuppressAdjacency | 1.3.6.1.4.1.6296.101.56.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current ISIS restart suppress-adjacency
| ||||
| SsleISISRestartHelper | 1.3.6.1.4.1.6296.101.56.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current ISIS restart helper
| ||||
| SsleISISRestartGracePeriod | 1.3.6.1.4.1.6296.101.56.1.1.3 | INTEGER (0..65535) | RO | |
scalar · INTEGER (0..65535) · read-only · current ISIS Graceful-restart period. Seconds: <1-65535> Specify the number of seconds in the grace period. | ||||
| NsleISISBaseControl | 1.3.6.1.4.1.6296.101.56.1.2 | |||
| SsleISISControlRequest | 1.3.6.1.4.1.6296.101.56.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleISISControlStatus | 1.3.6.1.4.1.6296.101.56.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The request of a user command | ||||
| SsleISISControlTimer | 1.3.6.1.4.1.6296.101.56.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleISISControlTimeStamp | 1.3.6.1.4.1.6296.101.56.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleISISControlReqResult | 1.3.6.1.4.1.6296.101.56.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleISISControlRestartSuppressAdjacency | 1.3.6.1.4.1.6296.101.56.1.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleISISControlRestartHelper | 1.3.6.1.4.1.6296.101.56.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleISISControlRestartPeriod | 1.3.6.1.4.1.6296.101.56.1.2.8 | Integer32 (0..1800) | RW | |
scalar · Integer32 (0..1800) · read-write · current ISIS Graceful-restart period. | ||||
| SsleISISControlClearSystemId | 1.3.6.1.4.1.6296.101.56.1.2.9 | OCTET STRING (SIZE (0..512)) | RW | |
scalar · OCTET STRING (SIZE (0..512)) · read-write · current System-ID Neighbor system ID in XXXX. XXXX. XXXX format. | ||||
| SsleISISControlClearIfName | 1.3.6.1.4.1.6296.101.56.1.2.10 | OCTET STRING (SIZE (0..512)) | RW | |
scalar · OCTET STRING (SIZE (0..512)) · read-write · current Interface Name of ISIS for clear | ||||
| SsleISISControlClearRouteTag | 1.3.6.1.4.1.6296.101.56.1.2.11 | OCTET STRING (SIZE (0..512)) | RW | |
scalar · OCTET STRING (SIZE (0..512)) · read-write · current Routing area tag | ||||
| SsleISISControlClearRouteMode | 1.3.6.1.4.1.6296.101.56.1.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current The route mode to clear. Redistribution: Clear ISIS local redistribution routes. all: Clear all of the ISIS routing table.s
| ||||
| NsleISISBaseNotification | 1.3.6.1.4.1.6296.101.56.1.3 | |||
| NsleISISProc | 1.3.6.1.4.1.6296.101.56.2 | |||
| NsleISISProcInfo | 1.3.6.1.4.1.6296.101.56.2.1 | |||
| TsleISISProcInfoTable | 1.3.6.1.4.1.6296.101.56.2.1.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISProcInfoEntry | 1.3.6.1.4.1.6296.101.56.2.1.1.1 | NA | ||
| CsleISISProcInfoInstanceID | 1.3.6.1.4.1.6296.101.56.2.1.1.1.1 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Instance ID of ISIS Process | ||||
| CsleISISProcInfoTag | 1.3.6.1.4.1.6296.101.56.2.1.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS Process Tag | ||||
| CsleISISProcBfdAllInterface | 1.3.6.1.4.1.6296.101.56.2.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Enable BFD on all interfaces
| ||||
| CsleISISProcCapCspf | 1.3.6.1.4.1.6296.101.56.2.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Enable Constrained Shortest Path First
| ||||
| CsleISISProcDynHostname | 1.3.6.1.4.1.6296.101.56.2.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enable dynamic hostname
| ||||
| CsleISISProcDynHostnameAreaTag | 1.3.6.1.4.1.6296.101.56.2.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Use area-tag as hostname
| ||||
| CsleISISProcIgnLspErr | 1.3.6.1.4.1.6296.101.56.2.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Ignore LSPs with bad checksums
| ||||
| CsleISISProcRouteHighPriorityTag | 1.3.6.1.4.1.6296.101.56.2.1.1.1.8 | Gauge32 (1..4294967295) | RO | |
column · Gauge32 (1..4294967295) · read-only · current Sets the high priority of route | ||||
| CsleISISProcIspfLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Enable incremental SPF for ISIS proces
| ||||
| CsleISISProcIsTypeLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current IS Level for ISIS process
| ||||
| CsleISISProcLspGenInterval | 1.3.6.1.4.1.6296.101.56.2.1.1.1.11 | INTEGER (1..120) | RO | |
column · INTEGER (1..120) · read-only · current Minimum interval between regenerating same LSP | ||||
| CsleISISProcLspGenIntervalLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current IS Level for ISIS process
| ||||
| CsleISISProcLspMtu | 1.3.6.1.4.1.6296.101.56.2.1.1.1.13 | INTEGER (512..1492) | RO | |
column · INTEGER (512..1492) · read-only · current Set lsp MTU in bytes | ||||
| CsleISISProcLspMtuLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current IS Level for ISIS process
| ||||
| CsleISISProcLspRefreshInterval | 1.3.6.1.4.1.6296.101.56.2.1.1.1.15 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Set LSP refresh interval | ||||
| CsleISISProcMaxAreaAddressNum | 1.3.6.1.4.1.6296.101.56.2.1.1.1.16 | INTEGER (3..254) | RO | |
column · INTEGER (3..254) · read-only · current Configure isis maximum area address | ||||
| CsleISISProcMaxLspLifetime | 1.3.6.1.4.1.6296.101.56.2.1.1.1.17 | INTEGER (350..65535) | RO | |
column · INTEGER (350..65535) · read-only · current Set maximum LSP lifetime | ||||
| CsleISISProcMetricStyle | 1.3.6.1.4.1.6296.101.56.2.1.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current Use old-style (ISO 10589) or new-style packet formats
| ||||
| CsleISISProcMetricStyleLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Level of Metric Style
| ||||
| CsleISISProcMplsTrafficEngLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Traffice Engine level of MPLS routing protocol
| ||||
| CsleISISProcMplsTrafficEngRouterID | 1.3.6.1.4.1.6296.101.56.2.1.1.1.21 | IpAddress | RO | |
column · IpAddress · read-only · current Traffice Engine Router ID of MPLS routing protoco | ||||
| CsleISISProcPrcIntervalExpMinDelay | 1.3.6.1.4.1.6296.101.56.2.1.1.1.22 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current Use exponential backoff min delays between PRC calculation | ||||
| CsleISISProcPrcIntervalExpMaxDelay | 1.3.6.1.4.1.6296.101.56.2.1.1.1.23 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current Use exponential backoff max delays between PRC calculation | ||||
| CsleISISProcProtocolTopolgy | 1.3.6.1.4.1.6296.101.56.2.1.1.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Protocol Topology
| ||||
| CsleISISProcRestartTimerVal | 1.3.6.1.4.1.6296.101.56.2.1.1.1.25 | INTEGER (5..65535) | RO | |
column · INTEGER (5..65535) · read-only · current Restart timer interval | ||||
| CsleISISProcRestartTimerLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current Restart timer level
| ||||
| CsleISISProcSpfIntervalExpMin | 1.3.6.1.4.1.6296.101.56.2.1.1.1.27 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current Use exponential backoff min delays between SPF calculations | ||||
| CsleISISProcSpfIntervalExpMax | 1.3.6.1.4.1.6296.101.56.2.1.1.1.28 | INTEGER (0..2147483647) | RO | |
column · INTEGER (0..2147483647) · read-only · current Use exponential backoff max delays between SPF calculations | ||||
| CsleISISProcSpfIntervalExpLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current Level of SPF Interval Exp
| ||||
| CsleISISProcAuthMode | 1.3.6.1.4.1.6296.101.56.2.1.1.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication mode of ISIS Process
| ||||
| CsleISISProcAuthModeLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication level of ISIS Process
| ||||
| CsleISISProcAuthSendOnly | 1.3.6.1.4.1.6296.101.56.2.1.1.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current Authentication send-only
| ||||
| CsleISISProcAuthSendOnlyLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current Level of Authentication send-only
| ||||
| CsleISISProcDomPassVal | 1.3.6.1.4.1.6296.101.56.2.1.1.1.34 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current ISIS Routing domain password | ||||
| CsleISISProcDomPassAuthSnp | 1.3.6.1.4.1.6296.101.56.2.1.1.1.35 | INTEGER | RO | |
column · INTEGER · read-only · current SNP Authentication of ISIS Routing domain
| ||||
| CsleISISProcAreaPassVal | 1.3.6.1.4.1.6296.101.56.2.1.1.1.36 | OCTET STRING (SIZE (0..512)) | RO | |
column · OCTET STRING (SIZE (0..512)) · read-only · current ISIS Routing Area password | ||||
| CsleISISProcAreaPassAuthSnp | 1.3.6.1.4.1.6296.101.56.2.1.1.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current SNP Authentication of ISIS Routing Area
| ||||
| CsleISISProcSetOverloadBit | 1.3.6.1.4.1.6296.101.56.2.1.1.1.38 | INTEGER | RO | |
column · INTEGER · read-only · current Signal other routers not to use us in SPF
| ||||
| CsleISISProcSetOverloadBitOnStartup | 1.3.6.1.4.1.6296.101.56.2.1.1.1.39 | INTEGER | RO | |
column · INTEGER · read-only · current Set overload-bit only temporarily after reboot
| ||||
| CsleISISProcSetOverloadBitOnStartupInterval | 1.3.6.1.4.1.6296.101.56.2.1.1.1.40 | Integer32 (5..86400) | RO | |
column · Integer32 (5..86400) · read-only · current Time in seconds to advertise ourself as overloaded after reboot | ||||
| CsleISISProcSetOverloadBitSuppress | 1.3.6.1.4.1.6296.101.56.2.1.1.1.41 | INTEGER | RO | |
column · INTEGER · read-only · current If overload-bit set, suppress the following types of IP prefixes
| ||||
| CsleISISProcWaitTimerVal | 1.3.6.1.4.1.6296.101.56.2.1.1.1.42 | INTEGER (1..65535) | RO | |
column · INTEGER (1..65535) · read-only · current Set lsp MTU in bytes | ||||
| CsleISISProcWaitTimerLevel | 1.3.6.1.4.1.6296.101.56.2.1.1.1.43 | INTEGER | RO | |
column · INTEGER · read-only · current IS Level for ISIS process
| ||||
| CsleISISProcAuthenKeyChainL1 | 1.3.6.1.4.1.6296.101.56.2.1.1.1.44 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The authentication key-chain with level1 | ||||
| CsleISISProcAuthenKeyChainL2 | 1.3.6.1.4.1.6296.101.56.2.1.1.1.45 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The authentication key-chain with level2. | ||||
| CsleISISProcAuthenKeyChainL1L2 | 1.3.6.1.4.1.6296.101.56.2.1.1.1.46 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The authentication key-chain with level1 and level2. | ||||
| NsleISISProcInfoControl | 1.3.6.1.4.1.6296.101.56.2.1.2 | |||
| SsleISISProcInfoControlRequest | 1.3.6.1.4.1.6296.101.56.2.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleISISProcInfoControlStatus | 1.3.6.1.4.1.6296.101.56.2.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISProcInfoControlTimer | 1.3.6.1.4.1.6296.101.56.2.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISProcInfoControlTimeStamp | 1.3.6.1.4.1.6296.101.56.2.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISProcInfoControlReqResult | 1.3.6.1.4.1.6296.101.56.2.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISProcInfoControlTag | 1.3.6.1.4.1.6296.101.56.2.1.2.6 | OCTET STRING (SIZE (0..512)) | RW | |
scalar · OCTET STRING (SIZE (0..512)) · read-write · current ISIS Process Tag | ||||
| SsleISISProcInfoControlBfdAllInterface | 1.3.6.1.4.1.6296.101.56.2.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable BFD on all interfaces
| ||||
| SsleISISProcInfoControlCapCspf | 1.3.6.1.4.1.6296.101.56.2.1.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable Constrained Shortest Path First
| ||||
| SsleISISProcInfoControlDynHostname | 1.3.6.1.4.1.6296.101.56.2.1.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable dynamic hostname
| ||||
| SsleISISProcInfoControlDynHostnameAreaTag | 1.3.6.1.4.1.6296.101.56.2.1.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use area-tag as hostname
| ||||
| SsleISISProcInfoControlIgnLspErr | 1.3.6.1.4.1.6296.101.56.2.1.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Ignore LSPs with bad checksums
| ||||
| SsleISISProcInfoControlRouteHighPriorityTag | 1.3.6.1.4.1.6296.101.56.2.1.2.12 | Gauge32 (1..4294967295) | RW | |
scalar · Gauge32 (1..4294967295) · read-write · current Sets the high priority of route | ||||
| SsleISISProcInfoControlIspfLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable incremental SPF for ISIS proces
| ||||
| SsleISISProcInfoControlIsTypeLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current IS Level for ISISprocess
| ||||
| SsleISISProcInfoControlLspGenInterval | 1.3.6.1.4.1.6296.101.56.2.1.2.15 | INTEGER (1..120) | RW | |
scalar · INTEGER (1..120) · read-write · current Minimum interval between regenerating same LSP | ||||
| SsleISISProcInfoControlLspGenIntervalLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current IS Level for ISISprocess
| ||||
| SsleISISProcInfoControlLspMtu | 1.3.6.1.4.1.6296.101.56.2.1.2.17 | INTEGER (512..1492) | RW | |
scalar · INTEGER (512..1492) · read-write · current Set lsp MTU in bytes | ||||
| SsleISISProcInfoControlLspMtuLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current IS Level for ISISprocess
| ||||
| SsleISISProcInfoControlLspRefreshInterval | 1.3.6.1.4.1.6296.101.56.2.1.2.19 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Set LSP refresh interval | ||||
| SsleISISProcInfoControlMaxAreaAddressNum | 1.3.6.1.4.1.6296.101.56.2.1.2.20 | INTEGER (3..254) | RW | |
scalar · INTEGER (3..254) · read-write · current Configure isis maximum area address | ||||
| SsleISISProcInfoControlMaxLspLifetime | 1.3.6.1.4.1.6296.101.56.2.1.2.21 | INTEGER (350..65535) | RW | |
scalar · INTEGER (350..65535) · read-write · current Set maximum LSP lifetime | ||||
| SsleISISProcInfoControlMetricStyle | 1.3.6.1.4.1.6296.101.56.2.1.2.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use old-style (ISO 10589) or new-style packet formats
| ||||
| SsleISISProcInfoControlMetricStyleLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current Level of Metric Style
| ||||
| SsleISISProcInfoControlMplsTrafficEngLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Traffice Engine level of MPLS routing protocol
| ||||
| SsleISISProcInfoControlMplsTrafficEngRouterID | 1.3.6.1.4.1.6296.101.56.2.1.2.25 | IpAddress | RW | |
scalar · IpAddress · read-write · current Traffice Engine Router ID of MPLS routing protocol | ||||
| SsleISISProcInfoControlPrcIntervalExpMinDelay | 1.3.6.1.4.1.6296.101.56.2.1.2.26 | INTEGER (0..2147483647) | RW | |
scalar · INTEGER (0..2147483647) · read-write · current Use exponential backoff min delays between PRC calculation | ||||
| SsleISISProcInfoControlPrcIntervalExpMaxDelay | 1.3.6.1.4.1.6296.101.56.2.1.2.27 | INTEGER (0..2147483647) | RW | |
scalar · INTEGER (0..2147483647) · read-write · current Use exponential backoff max delays between PRC calculation | ||||
| SsleISISProcInfoControlProtocolTopolgy | 1.3.6.1.4.1.6296.101.56.2.1.2.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current Protocol Topology
| ||||
| SsleISISProcInfoControlRestartTimerVal | 1.3.6.1.4.1.6296.101.56.2.1.2.29 | INTEGER (5..65535) | RW | |
scalar · INTEGER (5..65535) · read-write · current Protocol Topology | ||||
| SsleISISProcInfoControlRestartTimerLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Restart timer level
| ||||
| SsleISISProcInfoControlSpfIntervalExpMin | 1.3.6.1.4.1.6296.101.56.2.1.2.31 | INTEGER (0..2147483647) | RW | |
scalar · INTEGER (0..2147483647) · read-write · current Use exponential backoff min delays between SPF calculations | ||||
| SsleISISProcInfoControlSpfIntervalExpMax | 1.3.6.1.4.1.6296.101.56.2.1.2.32 | INTEGER (0..2147483647) | RW | |
scalar · INTEGER (0..2147483647) · read-write · current Use exponential backoff max delays between SPF calculations | ||||
| SsleISISProcInfoControlSpfIntervalExpLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current Level of SPF Interval Exp
| ||||
| SsleISISProcInfoControlAuthMode | 1.3.6.1.4.1.6296.101.56.2.1.2.34 | INTEGER | RW | |
scalar · INTEGER · read-write · current Authentication mode of ISIS Process
| ||||
| SsleISISProcInfoControlAuthModeLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.35 | INTEGER | RW | |
scalar · INTEGER · read-write · current Authentication level of ISIS Process
| ||||
| SsleISISProcInfoControlAuthSendOnly | 1.3.6.1.4.1.6296.101.56.2.1.2.36 | INTEGER | RW | |
scalar · INTEGER · read-write · current Authentication send-only
| ||||
| SsleISISProcInfoControlAuthSendOnlyLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.37 | INTEGER | RW | |
scalar · INTEGER · read-write · current Level of Authentication send-only
| ||||
| SsleISISProcInfoControlDomPassVal | 1.3.6.1.4.1.6296.101.56.2.1.2.38 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current ISIS Routing domain password | ||||
| SsleISISProcInfoControlDomPassAuthSnp | 1.3.6.1.4.1.6296.101.56.2.1.2.39 | INTEGER | RW | |
scalar · INTEGER · read-write · current SNP Authentication of ISIS Routing domain
| ||||
| SsleISISProcInfoControlAreaPassVal | 1.3.6.1.4.1.6296.101.56.2.1.2.40 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current ISIS Routing Area password | ||||
| SsleISISProcInfoControlAreaPassAuthSnp | 1.3.6.1.4.1.6296.101.56.2.1.2.41 | INTEGER | RW | |
scalar · INTEGER · read-write · current SNP Authentication of ISIS Routing domain
| ||||
| SsleISISProcInfoControlSetOverloadBit | 1.3.6.1.4.1.6296.101.56.2.1.2.42 | INTEGER | RW | |
scalar · INTEGER · read-write · current Signal other routers not to use us in SPF
| ||||
| SsleISISProcInfoControlSetOverloadBitOnStartup | 1.3.6.1.4.1.6296.101.56.2.1.2.43 | INTEGER | RW | |
scalar · INTEGER · read-write · current Set overload-bit only temporarily after reboot
| ||||
| SsleISISProcInfoControlSetOverloadBitOnStartupInterval | 1.3.6.1.4.1.6296.101.56.2.1.2.44 | INTEGER (5..86400) | RW | |
scalar · INTEGER (5..86400) · read-write · current Time in seconds to advertise ourself as overloaded after reboot | ||||
| SsleISISProcInfoControlSetOverloadBitSuppress | 1.3.6.1.4.1.6296.101.56.2.1.2.45 | INTEGER | RW | |
scalar · INTEGER · read-write · current If overload-bit set, suppress the following types of IP prefixes
| ||||
| SsleISISProcControlWaitTimerVal | 1.3.6.1.4.1.6296.101.56.2.1.2.46 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Set lsp MTU in bytes | ||||
| SsleISISProcControlWaitTimerLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.47 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable incremental SPF for ISIS proces
| ||||
| SsleISISProcControlAuthenkeyChain | 1.3.6.1.4.1.6296.101.56.2.1.2.48 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The authentication key-chain word. | ||||
| SsleISISProcControlAuthenkeyChainLevel | 1.3.6.1.4.1.6296.101.56.2.1.2.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current The authentication key-chain level.
| ||||
| NsleISISProcInfoNotification | 1.3.6.1.4.1.6296.101.56.2.1.3 | |||
| NsleISISProcNet | 1.3.6.1.4.1.6296.101.56.2.2 | |||
| TsleISISProcNetTable | 1.3.6.1.4.1.6296.101.56.2.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISProcNetEntry | 1.3.6.1.4.1.6296.101.56.2.2.1.1 | NA | ||
| CsleISISProcNetInstanceID | 1.3.6.1.4.1.6296.101.56.2.2.1.1.1 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Description. | ||||
| CsleISISProcNetTitle | 1.3.6.1.4.1.6296.101.56.2.2.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| NsleISISProcNetControl | 1.3.6.1.4.1.6296.101.56.2.2.2 | |||
| SsleISISProcNetControlRequest | 1.3.6.1.4.1.6296.101.56.2.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleISISProcNetControlStatus | 1.3.6.1.4.1.6296.101.56.2.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISProcNetControlTimer | 1.3.6.1.4.1.6296.101.56.2.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISProcNetControlTimeStamp | 1.3.6.1.4.1.6296.101.56.2.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISProcNetControlReqResult | 1.3.6.1.4.1.6296.101.56.2.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISProcNetControlInstanceID | 1.3.6.1.4.1.6296.101.56.2.2.2.6 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Description. | ||||
| SsleISISProcNetControlTitle | 1.3.6.1.4.1.6296.101.56.2.2.2.7 | OCTET STRING (SIZE (0..512)) | RW | |
scalar · OCTET STRING (SIZE (0..512)) · read-write · current Description. | ||||
| NsleISISProcNetNotification | 1.3.6.1.4.1.6296.101.56.2.2.3 | |||
| NsleISISProcDistanceV4 | 1.3.6.1.4.1.6296.101.56.2.3 | |||
| TsleISISProcDistanceV4Table | 1.3.6.1.4.1.6296.101.56.2.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISProcDistanceV4Entry | 1.3.6.1.4.1.6296.101.56.2.3.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleISISProcDistanceV4InstanceID | 1.3.6.1.4.1.6296.101.56.2.3.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current ISIS Instance ID | ||||
| CsleISISProcDistanceV4Dist | 1.3.6.1.4.1.6296.101.56.2.3.1.1.2 | Integer32 (1..255) | RO | |
column · Integer32 (1..255) · read-only · current ISIS Administrative Distance range | ||||
| CsleISISProcDistanceV4SytemID | 1.3.6.1.4.1.6296.101.56.2.3.1.1.3 | OCTET STRING (SIZE (0..112)) | RO | |
column · OCTET STRING (SIZE (0..112)) · read-only · current Source ID in XXXX.XXXX.XXXX format. | ||||
| CsleISISProcDistanceV4AccessList | 1.3.6.1.4.1.6296.101.56.2.3.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Access-list name. | ||||
| NsleISISProcDistanceV4Control | 1.3.6.1.4.1.6296.101.56.2.3.2 | |||
| SsleISISProcDistanceV4ControlRequest | 1.3.6.1.4.1.6296.101.56.2.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleISISProcDistanceV4ControlStatus | 1.3.6.1.4.1.6296.101.56.2.3.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISProcDistanceV4ControlTimer | 1.3.6.1.4.1.6296.101.56.2.3.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISProcDistanceV4TimeStamp | 1.3.6.1.4.1.6296.101.56.2.3.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISProcDistanceV4ntrolReqResult | 1.3.6.1.4.1.6296.101.56.2.3.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISProcDistanceV4ControlInstanceID | 1.3.6.1.4.1.6296.101.56.2.3.2.6 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Set the ISIS Instance ID | ||||
| SsleISISProcDistanceV4ControlDist | 1.3.6.1.4.1.6296.101.56.2.3.2.7 | Integer32 (0..255) | RO | |
scalar · Integer32 (0..255) · read-only · current ISIS Administrative Distance range | ||||
| SsleISISProcDistanceV4ControlSytemID | 1.3.6.1.4.1.6296.101.56.2.3.2.8 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Source ID in XXXX.XXXX.XXXX format. | ||||
| SsleISISProcDistanceV4ControlAccessList | 1.3.6.1.4.1.6296.101.56.2.3.2.9 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Access-list name. | ||||
| NsleISISProcDistanceV4Notification | 1.3.6.1.4.1.6296.101.56.2.3.3 | |||
| NsleISISIf | 1.3.6.1.4.1.6296.101.56.3 | |||
| TslsISISIfTable | 1.3.6.1.4.1.6296.101.56.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RslsISISIfEntry | 1.3.6.1.4.1.6296.101.56.3.1.1 | NA | ||
| CsleISISIfIndex | 1.3.6.1.4.1.6296.101.56.3.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current vlan interface index for isis protocol. | ||||
| CsleISISIfMplsLdpIgpSync | 1.3.6.1.4.1.6296.101.56.3.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2
| ||||
| CsleISISIfIpRouter | 1.3.6.1.4.1.6296.101.56.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthSendLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthSendLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthModeMd5Levle1 | 1.3.6.1.4.1.6296.101.56.3.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthModeMd5Levle2 | 1.3.6.1.4.1.6296.101.56.3.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthModeTextLevle1 | 1.3.6.1.4.1.6296.101.56.3.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthModeTextLevle2 | 1.3.6.1.4.1.6296.101.56.3.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the MD5 authentication mode. 1 : enable 0 : disable
| ||||
| CsleISISIfAuthKeyChainLevle1 | 1.3.6.1.4.1.6296.101.56.3.1.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string | ||||
| CsleISISIfAuthKeyChainLevle2 | 1.3.6.1.4.1.6296.101.56.3.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string | ||||
| CsleISISIfBfd | 1.3.6.1.4.1.6296.101.56.3.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
| ||||
| CsleISISIfBfdDisable | 1.3.6.1.4.1.6296.101.56.3.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
| ||||
| CsleISISIfCircuitType | 1.3.6.1.4.1.6296.101.56.3.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
| ||||
| CsleISISIfCsnpIntervalLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.15 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10 | ||||
| CsleISISIfCsnpIntervalLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.16 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10 | ||||
| CsleISISIfHelloPadding | 1.3.6.1.4.1.6296.101.56.3.1.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
| ||||
| CsleISISIfHelloIntervalLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.18 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10 | ||||
| CsleISISIfHelloIntervalLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.19 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10 | ||||
| CsleISISIfHelloIntervalMinimalLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
| ||||
| CsleISISIfHelloIntervalMinimalLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
| ||||
| CsleISISIfHelloMultiplierLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.22 | Integer32 (2..10) | RO | |
column · Integer32 (2..10) · read-only · current Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3 | ||||
| CsleISISIfHelloMultiplierLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.23 | Integer32 (2..10) | RO | |
column · Integer32 (2..10) · read-only · current Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3 | ||||
| CsleISISIfLspInterval | 1.3.6.1.4.1.6296.101.56.3.1.1.24 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current Use this command to set the Link State Packet (LSP) transmission interval. range : 1 - 4294967295 default : 33 | ||||
| CsleISISIfMeshGroup | 1.3.6.1.4.1.6296.101.56.3.1.1.25 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current Use this command to set Mesh Group ID on the current interface. range : 1 - 4294967295 disable : 0 | ||||
| CsleISISIfMetricLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.26 | Integer32 (1..63) | RO | |
column · Integer32 (1..63) · read-only · current Use this command to set default metric for the interface. range : 1 - 63 default : 10 | ||||
| CsleISISIfMetricLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.27 | Integer32 (1..63) | RO | |
column · Integer32 (1..63) · read-only · current Use this command to set default metric for the interface. range : 1 - 63 default : 10 | ||||
| CsleISISIfNetwork | 1.3.6.1.4.1.6296.101.56.3.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
| ||||
| CsleISISIfPriorityLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.29 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64 | ||||
| CsleISISIfPriorityLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.30 | Integer32 (0..127) | RO | |
column · Integer32 (0..127) · read-only · current Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64 | ||||
| CsleISISIfRestartHelloIntervalLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.31 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3 | ||||
| CsleISISIfRestartHelloIntervalLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.32 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3 | ||||
| CsleISISIfRetransmitInterval | 1.3.6.1.4.1.6296.101.56.3.1.1.33 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Use this command to set LSP retransmission interval. range : 0 - 65535 default : 5 | ||||
| CsleISISIfWideMetricLevel1 | 1.3.6.1.4.1.6296.101.56.3.1.1.34 | Integer32 (1..16777214) | RO | |
column · Integer32 (1..16777214) · read-only · current Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 | ||||
| CsleISISIfWideMetricLevel2 | 1.3.6.1.4.1.6296.101.56.3.1.1.35 | Integer32 (1..16777214) | RW | |
column · Integer32 (1..16777214) · read-write · current Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 | ||||
| NsleISISIfControl | 1.3.6.1.4.1.6296.101.56.3.2 | |||
| SsleISISIfControlRequest | 1.3.6.1.4.1.6296.101.56.3.2.1 | SleControlRequestResultType | RW | |
scalar · SleControlRequestResultType · read-write · current Description.
| ||||
| SsleISISIfControlStatus | 1.3.6.1.4.1.6296.101.56.3.2.2 | SleControlStatusType | RW | |
scalar · SleControlStatusType · read-write · current Description. | ||||
| SsleISISIfControlTimer | 1.3.6.1.4.1.6296.101.56.3.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISIfControlTimeStamp | 1.3.6.1.4.1.6296.101.56.3.2.4 | TimeTicks | RW | |
scalar · TimeTicks · read-write · current Description. | ||||
| SsleISISIfControlReqResult | 1.3.6.1.4.1.6296.101.56.3.2.5 | SleControlRequestResultType | RW | |
scalar · SleControlRequestResultType · read-write · current Description. | ||||
| SsleISISIfControlIndex | 1.3.6.1.4.1.6296.101.56.3.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current vlan interface index for isis protocol. | ||||
| SsleISISIfControlMplsLdpIgpSync | 1.3.6.1.4.1.6296.101.56.3.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2
| ||||
| SsleISISIfControlIpRouter | 1.3.6.1.4.1.6296.101.56.3.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthSendLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthSendLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthModeMd5Levle1 | 1.3.6.1.4.1.6296.101.56.3.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthModeMd5Levle2 | 1.3.6.1.4.1.6296.101.56.3.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthModeTextLevle1 | 1.3.6.1.4.1.6296.101.56.3.2.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthModeTextLevle2 | 1.3.6.1.4.1.6296.101.56.3.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable
| ||||
| SsleISISIfControlAuthKeyChainLevle1 | 1.3.6.1.4.1.6296.101.56.3.2.15 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string | ||||
| SsleISISIfControlAuthKeyChainLevle2 | 1.3.6.1.4.1.6296.101.56.3.2.16 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string | ||||
| SsleISISIfControlBfd | 1.3.6.1.4.1.6296.101.56.3.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
| ||||
| SsleISISIfControlBfdDisable | 1.3.6.1.4.1.6296.101.56.3.2.18 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable
| ||||
| SsleISISIfControlCircuitType | 1.3.6.1.4.1.6296.101.56.3.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2
| ||||
| SsleISISIfControlCsnpIntervalLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.20 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10 | ||||
| SsleISISIfControlCsnpIntervalLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.21 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10 | ||||
| SsleISISIfControlHelloPadding | 1.3.6.1.4.1.6296.101.56.3.2.22 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable
| ||||
| SsleISISIfControlHelloIntervalLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.23 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10 | ||||
| SsleISISIfControlHelloIntervalLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.24 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10 | ||||
| SsleISISIfControlHelloIntervalMinimalLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
| ||||
| SsleISISIfControlHelloIntervalMinimalLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to set the Hello interval in seconds. 1 : enable 0 : disable
| ||||
| SsleISISIfControlHelloMultiplierLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.27 | Integer32 (2..10) | RW | |
scalar · Integer32 (2..10) · read-write · current Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3 | ||||
| SsleISISIfControlHelloMultiplierLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.28 | Integer32 (2..10) | RW | |
scalar · Integer32 (2..10) · read-write · current Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3 | ||||
| SsleISISIfControlLspInterval | 1.3.6.1.4.1.6296.101.56.3.2.29 | Unsigned32 (2..4294967295) | RW | |
scalar · Unsigned32 (2..4294967295) · read-write · current Use this command to set the Link State Packet (LSP) transmission interval. range : 1 ? 4294967295 default : 33 | ||||
| SsleISISIfControlMeshGroup | 1.3.6.1.4.1.6296.101.56.3.2.30 | Unsigned32 (0 | 1..4294967295) | RW | |
scalar · Unsigned32 (0 | 1..4294967295) · read-write · current Use this command to set Mesh Group ID on the current interface. range : 1 ? 4294967295 disable : 0 | ||||
| SsleISISIfControlMetricLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.31 | Integer32 (1..63) | RW | |
scalar · Integer32 (1..63) · read-write · current Use this command to set default metric for the interface. range : 1 ? 63 default : 10 | ||||
| SsleISISIfControlMetricLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.32 | Integer32 (1..63) | RW | |
scalar · Integer32 (1..63) · read-write · current Use this command to set default metric for the interface. range : 1 ? 63 default : 10 | ||||
| SsleISISIfControlNetwork | 1.3.6.1.4.1.6296.101.56.3.2.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point
| ||||
| SsleISISIfControlPriorityLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.34 | Integer32 (0..127) | RW | |
scalar · Integer32 (0..127) · read-write · current Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64 | ||||
| SsleISISIfControlPriorityLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.35 | Integer32 (0..127) | RW | |
scalar · Integer32 (0..127) · read-write · current Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64 | ||||
| SsleISISIfControlRestartHelloIntervalLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.36 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3 | ||||
| SsleISISIfControlRestartHelloIntervalLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.37 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3 | ||||
| SsleISISIfControlRetransmitInterval | 1.3.6.1.4.1.6296.101.56.3.2.38 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Use this command to set LSP retransmission interval. range : 0 ? 65535 default : 5 | ||||
| SsleISISIfControlWideMetricLevel1 | 1.3.6.1.4.1.6296.101.56.3.2.39 | Integer32 (1..16777214) | RW | |
scalar · Integer32 (1..16777214) · read-write · current Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 | ||||
| SsleISISIfControlWideMetricLevel2 | 1.3.6.1.4.1.6296.101.56.3.2.40 | Integer32 (1..16777214) | RW | |
scalar · Integer32 (1..16777214) · read-write · current Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 | ||||
| NslsISISNotification | 1.3.6.1.4.1.6296.101.56.3.3 | |||
| TsleISISIfStatusTable | 1.3.6.1.4.1.6296.101.56.3.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISIfStatusEntry | 1.3.6.1.4.1.6296.101.56.3.4.1 | NA | ||
| CsleISISIfStatusIfIndex | 1.3.6.1.4.1.6296.101.56.3.4.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current vlan interface index for isis protocol. | ||||
| CsleIsisIfStatusIfStatus | 1.3.6.1.4.1.6296.101.56.3.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The interface up/down status
| ||||
| CsleIsisIfStatusIsisTag | 1.3.6.1.4.1.6296.101.56.3.4.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ISIS tag | ||||
| CsleIsisIfStatusNetworkType | 1.3.6.1.4.1.6296.101.56.3.4.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The network type
| ||||
| CsleIsisIfStatusCircuitType | 1.3.6.1.4.1.6296.101.56.3.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The circuit type
| ||||
| CsleIsisIfStatusLocalCircuitId | 1.3.6.1.4.1.6296.101.56.3.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The local circuit id | ||||
| CsleIsisIfStatusExtendedLocalCircuitId | 1.3.6.1.4.1.6296.101.56.3.4.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The extended local circuit id | ||||
| CsleIsisIfStatusLocalSnpa | 1.3.6.1.4.1.6296.101.56.3.4.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The local SNPA mac address | ||||
| CsleIsisIfStatusLdpSyncHoldTimer | 1.3.6.1.4.1.6296.101.56.3.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The LDP sync hold timer(sec) | ||||
| CsleIsisIfStatusLdpSyncRemainingTime | 1.3.6.1.4.1.6296.101.56.3.4.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The LDP sync remaining time(sec) | ||||
| CsleIsisIfStatusCircuitL1Metric | 1.3.6.1.4.1.6296.101.56.3.4.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The narrow metric of level1 | ||||
| CsleIsisIfStatusCircuitL1WideMetric | 1.3.6.1.4.1.6296.101.56.3.4.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The wide metric of level1 | ||||
| CsleIsisIfStatusCircuitL1Priority | 1.3.6.1.4.1.6296.101.56.3.4.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The priority of level1 | ||||
| CsleIsisIfStatusCircuitL1CircuitId | 1.3.6.1.4.1.6296.101.56.3.4.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The circuit id of level1 | ||||
| CsleIsisIfStatusCircuitL1ActiveAdjacencies | 1.3.6.1.4.1.6296.101.56.3.4.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The active adjacencies of level1 | ||||
| CsleIsisIfStatusCircuitL1LscpMtu | 1.3.6.1.4.1.6296.101.56.3.4.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The MTU of level1 | ||||
| CsleIsisIfStatusCircuitL2Metric | 1.3.6.1.4.1.6296.101.56.3.4.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The narrow metric of level2 | ||||
| CsleIsisIfStatusCircuitL2WideMetric | 1.3.6.1.4.1.6296.101.56.3.4.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The wide metric of level2 | ||||
| CsleIsisIfStatusCircuitL2Priority | 1.3.6.1.4.1.6296.101.56.3.4.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current The priority of level2 | ||||
| CsleIsisIfStatusCircuitL2CircuitId | 1.3.6.1.4.1.6296.101.56.3.4.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current The circuit id of level2 | ||||
| CsleIsisIfStatusCircuitL2ActiveAdjacencies | 1.3.6.1.4.1.6296.101.56.3.4.1.21 | Integer32 | RO | |
column · Integer32 · read-only · current The active adjacencies of level2 | ||||
| CsleIsisIfStatusCircuitL2LscpMtu | 1.3.6.1.4.1.6296.101.56.3.4.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current The MTU of level2 | ||||
| CsleIsisIfStatusL1HelloTimerBroadcast | 1.3.6.1.4.1.6296.101.56.3.4.1.23 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Level1 hello timer of broadcast | ||||
| CsleIsisIfStatusL2HelloTimerBroadcast | 1.3.6.1.4.1.6296.101.56.3.4.1.24 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Level2 hello timer of broadcast | ||||
| CsleIsisIfStatusL1HellotimerPoint2Point | 1.3.6.1.4.1.6296.101.56.3.4.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Level1 hello timer of porint to point | ||||
| CsleIsisIfStatusL2HellotimerPoint2Point | 1.3.6.1.4.1.6296.101.56.3.4.1.26 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Level2 hello timer of porint to point | ||||
| NsleISISInstIf | 1.3.6.1.4.1.6296.101.56.4 | |||
| TsleISISInstIfTable | 1.3.6.1.4.1.6296.101.56.4.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISInstIfEntry | 1.3.6.1.4.1.6296.101.56.4.1.1 | NA | ||
| CsleISISInstIfInstanceId | 1.3.6.1.4.1.6296.101.56.4.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The ISIS instance index | ||||
| CsleISISInstIfInterfaceId | 1.3.6.1.4.1.6296.101.56.4.1.1.2 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The ISIS interface index | ||||
| CsleISISPassiveInterface | 1.3.6.1.4.1.6296.101.56.4.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The passive interface configuration.
| ||||
| NsleISISInstIfControl | 1.3.6.1.4.1.6296.101.56.4.2 | |||
| SsleISISInstIfControlRequest | 1.3.6.1.4.1.6296.101.56.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleISISInstIfControlStatus | 1.3.6.1.4.1.6296.101.56.4.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISInstIfControlTimer | 1.3.6.1.4.1.6296.101.56.4.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISInstIfControlTimeStamp | 1.3.6.1.4.1.6296.101.56.4.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISInstIfControlReqResult | 1.3.6.1.4.1.6296.101.56.4.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISInstIfControlInstanceId | 1.3.6.1.4.1.6296.101.56.4.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ISIS instance index | ||||
| SsleISISInstIfControlInterfaceId | 1.3.6.1.4.1.6296.101.56.4.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| NsleISISInstRedistribute | 1.3.6.1.4.1.6296.101.56.5 | |||
| NsleISISInstRedistProtocol | 1.3.6.1.4.1.6296.101.56.5.1 | |||
| TsleISISInstRedistProtocolTable | 1.3.6.1.4.1.6296.101.56.5.1.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISInstRedistProtocolEntry | 1.3.6.1.4.1.6296.101.56.5.1.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleISISInstRedistProtocolInstanceId | 1.3.6.1.4.1.6296.101.56.5.1.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The ISIS instance index | ||||
| CsleISISInstRedistProtocolId | 1.3.6.1.4.1.6296.101.56.5.1.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ISIS instance index
| ||||
| CsleISISInstRedistProtocolMetric | 1.3.6.1.4.1.6296.101.56.5.1.1.1.3 | Gauge32 (0..4261412864) | RO | |
column · Gauge32 (0..4261412864) · read-only · current The ISIS interface index | ||||
| CsleISISInstRedistProtocolMetricType | 1.3.6.1.4.1.6296.101.56.5.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The passive interface configuration.
| ||||
| CsleISISInstRedistProtocolRouteLevelType | 1.3.6.1.4.1.6296.101.56.5.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The passive interface configuration.
| ||||
| CsleISISInstRedistProtocolRouteMapName | 1.3.6.1.4.1.6296.101.56.5.1.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The passive interface configuration. | ||||
| NsleISISInstRedistProtocolControl | 1.3.6.1.4.1.6296.101.56.5.1.2 | |||
| SsleISISInstRedistProtocolControlRequest | 1.3.6.1.4.1.6296.101.56.5.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleISISInstRedistProtocolControlStatus | 1.3.6.1.4.1.6296.101.56.5.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISInstRedistProtocolControlTimer | 1.3.6.1.4.1.6296.101.56.5.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISInstRedistProtocolControlTimeStamp | 1.3.6.1.4.1.6296.101.56.5.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISInstRedistProtocolControlReqResult | 1.3.6.1.4.1.6296.101.56.5.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISInstRedistProtocolControlInstanceId | 1.3.6.1.4.1.6296.101.56.5.1.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ISIS instance index | ||||
| SsleISISInstRedistProtocolControlId | 1.3.6.1.4.1.6296.101.56.5.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ISIS interface index ( 0 means all interface)
| ||||
| SsleISISInstRedistProtocolControlMetric | 1.3.6.1.4.1.6296.101.56.5.1.2.8 | Gauge32 (0..4261412864) | RW | |
scalar · Gauge32 (0..4261412864) · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| SsleISISInstRedistProtocolControlMetricType | 1.3.6.1.4.1.6296.101.56.5.1.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ISIS interface index ( 0 means all interface)
| ||||
| SsleISISInstRedistProtocolControlRouteLevelType | 1.3.6.1.4.1.6296.101.56.5.1.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ISIS interface index ( 0 means all interface)
| ||||
| SsleISISInstRedistProtocolControlRouteMapName | 1.3.6.1.4.1.6296.101.56.5.1.2.11 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| NsleISISInstRedistIsisProtocol | 1.3.6.1.4.1.6296.101.56.5.2 | |||
| TsleISISInstRedistIsisProtocolTable | 1.3.6.1.4.1.6296.101.56.5.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISInstRedistIsisProtocolEntry | 1.3.6.1.4.1.6296.101.56.5.2.1.1 | NA | ||
| CsleISISInstRedistIsisProtocolInstanceId | 1.3.6.1.4.1.6296.101.56.5.2.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The ISIS instance index | ||||
| CsleISISInstRedistIsisProtocolInterAreaFromLv1ToLv2 | 1.3.6.1.4.1.6296.101.56.5.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ISIS instance index
| ||||
| CsleISISInstRedistIsisProtocolLv1Lv2DistributeList | 1.3.6.1.4.1.6296.101.56.5.2.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ISIS interface index | ||||
| CsleISISInstRedistIsisProtocolInterAreaFromLv2ToLv1 | 1.3.6.1.4.1.6296.101.56.5.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The passive interface configuration.
| ||||
| CsleISISInstRedistIsisProtocolLv2Lv1DistributeList | 1.3.6.1.4.1.6296.101.56.5.2.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The passive interface configuration. | ||||
| NsleISISInstRedistIsisProtocolControl | 1.3.6.1.4.1.6296.101.56.5.2.2 | |||
| SsleISISInstRedistIsisProtocolControlRequest | 1.3.6.1.4.1.6296.101.56.5.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleISISInstRedistIsisProtocolControlStatus | 1.3.6.1.4.1.6296.101.56.5.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISInstRedistIsisProtocolControlTimer | 1.3.6.1.4.1.6296.101.56.5.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISInstRedistIsisProtocolControlTimeStamp | 1.3.6.1.4.1.6296.101.56.5.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISInstRedistIsisProtocolControlReqResult | 1.3.6.1.4.1.6296.101.56.5.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISInstRedistIsisProtocolControlInstanceId | 1.3.6.1.4.1.6296.101.56.5.2.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ISIS instance index | ||||
| SsleISISInstRedistIsisProtocolControlLv1Lv2DistributeList | 1.3.6.1.4.1.6296.101.56.5.2.2.7 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| SsleISISInstRedistIsisProtocolControlLv2Lv1DistributeList | 1.3.6.1.4.1.6296.101.56.5.2.2.8 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| NsleISISSummanryAddress | 1.3.6.1.4.1.6296.101.56.6 | |||
| TsleISISSummanryAddressTable | 1.3.6.1.4.1.6296.101.56.6.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISSummanryAddressEntry | 1.3.6.1.4.1.6296.101.56.6.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleISISSummanryAddressInstanceId | 1.3.6.1.4.1.6296.101.56.6.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The ISIS instance index | ||||
| CsleISISSummanryAddressIpValue | 1.3.6.1.4.1.6296.101.56.6.1.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The ISIS interface index | ||||
| CsleISISSummanryAddressIpNetmask | 1.3.6.1.4.1.6296.101.56.6.1.1.3 | Integer32 (0..32) | RO | |
column · Integer32 (0..32) · read-only · current The passive interface configuration. | ||||
| CsleISISSummanryAddressLevel | 1.3.6.1.4.1.6296.101.56.6.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The passive interface configuration.
| ||||
| CsleISISSummanryAddressMetric | 1.3.6.1.4.1.6296.101.56.6.1.1.5 | Integer32 (1..63) | RO | |
column · Integer32 (1..63) · read-only · current The passive interface configuration. | ||||
| NsleISISSummanryAddressControl | 1.3.6.1.4.1.6296.101.56.6.2 | |||
| SsleISISSummanryAddressControlRequest | 1.3.6.1.4.1.6296.101.56.6.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleISISSummanryAddressControlStatus | 1.3.6.1.4.1.6296.101.56.6.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleISISSummanryAddressControlTimer | 1.3.6.1.4.1.6296.101.56.6.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleISISSummanryAddressControlTimeStamp | 1.3.6.1.4.1.6296.101.56.6.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleISISSummanryAddressControlReqResult | 1.3.6.1.4.1.6296.101.56.6.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleISISSummanryAddressControlInstanceId | 1.3.6.1.4.1.6296.101.56.6.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ISIS instance index | ||||
| SsleISISSummanryAddressControlIpValue | 1.3.6.1.4.1.6296.101.56.6.2.7 | IpAddress | RW | |
scalar · IpAddress · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| SsleISISSummanryAddressControlIpNetmask | 1.3.6.1.4.1.6296.101.56.6.2.8 | Integer32 (0..32) | RW | |
scalar · Integer32 (0..32) · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| SsleISISSummanryAddressControlLevel | 1.3.6.1.4.1.6296.101.56.6.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The ISIS interface index ( 0 means all interface)
| ||||
| SsleISISSummanryAddressControlMetric | 1.3.6.1.4.1.6296.101.56.6.2.10 | Integer32 (1..63) | RW | |
scalar · Integer32 (1..63) · read-write · current The ISIS interface index ( 0 means all interface) | ||||
| NsleISISDatabase | 1.3.6.1.4.1.6296.101.56.7 | |||
| TsleISISDatabaseTable | 1.3.6.1.4.1.6296.101.56.7.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISDatabaseEntry | 1.3.6.1.4.1.6296.101.56.7.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleISISDatabaseTag | 1.3.6.1.4.1.6296.101.56.7.1.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database tag ID | ||||
| CsleISISDatabaseLevel | 1.3.6.1.4.1.6296.101.56.7.1.1.2 | Integer32 (1..2) | RO | |
column · Integer32 (1..2) · read-only · current ISIS database level index | ||||
| CsleISISDatabaseLspId | 1.3.6.1.4.1.6296.101.56.7.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database lsp ID | ||||
| CsleISISDatabaseLspSeqNum | 1.3.6.1.4.1.6296.101.56.7.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database lsp sequence number | ||||
| CsleISISDatabaseLspChecksum | 1.3.6.1.4.1.6296.101.56.7.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database lsp Checksum | ||||
| CsleISISDatabaseLspHoldtime | 1.3.6.1.4.1.6296.101.56.7.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database lsp Holdtime | ||||
| CsleISISDatabaseAtt | 1.3.6.1.4.1.6296.101.56.7.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current ISIS database att | ||||
| CsleISISDatabaseP | 1.3.6.1.4.1.6296.101.56.7.1.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current ISIS database partition | ||||
| CsleISISDatabaseOl | 1.3.6.1.4.1.6296.101.56.7.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current ISIS database overload | ||||
| NsleISISDatabaseDetail | 1.3.6.1.4.1.6296.101.56.8 | |||
| TsleISISDatabaseDetailTable | 1.3.6.1.4.1.6296.101.56.8.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleISISDatabaseDetailEntry | 1.3.6.1.4.1.6296.101.56.8.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleISISDatabaseDetailTag | 1.3.6.1.4.1.6296.101.56.8.1.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database tag | ||||
| CsleISISDatabaseDetailLevel | 1.3.6.1.4.1.6296.101.56.8.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current ISIS database level
| ||||
| CsleISISDatabaseDetailLspId | 1.3.6.1.4.1.6296.101.56.8.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database lsp id | ||||
| CsleISISDatabaseDetailType | 1.3.6.1.4.1.6296.101.56.8.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current ISIS database lsp detail type.
| ||||
| CsleISISDatabaseDetailIndex | 1.3.6.1.4.1.6296.101.56.8.1.1.5 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current ISIS database detail index. | ||||
| CsleISISDatabaseDetailPad | 1.3.6.1.4.1.6296.101.56.8.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database lsp detail pad. | ||||
| CsleISISDatabaseDetailValue | 1.3.6.1.4.1.6296.101.56.8.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current ISIS database lsp detail vlaue. | ||||
| CsleISISDatabaseDetailDescription | 1.3.6.1.4.1.6296.101.56.8.1.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ISIS database detail description. | ||||
| GsleISISGroup | 1.3.6.1.4.1.6296.101.56.9 | |||
group · current Description.
| ||||