SLE-DEVICE-MIB
DASAN Co.,LTD.Description.
snmptranslate -m SLE-DEVICE-MIB -Tpsnmpwalk -v2c -c <community> -m SLE-DEVICE-MIB <host> 1.3.6.1.4.1.6296.101.2Imports
| DASAN-SMI | sleMgmt |
|---|---|
| SLE-TC-MIB | SleControlRequestResultType, SleControlStatusType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | BITS, Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsleDevice | 1.3.6.1.4.1.6296.101.2 | |||
identity Description. | ||||
| NsleDeviceBase | 1.3.6.1.4.1.6296.101.2.1 | |||
| NsleDeviceBaseInfo | 1.3.6.1.4.1.6296.101.2.1.1 | |||
| SsleDeviceEthernetPortNum | 1.3.6.1.4.1.6296.101.2.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of ethernet port. | ||||
| SsleDevicePowerNum | 1.3.6.1.4.1.6296.101.2.1.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of power module | ||||
| SsleDeviceFanModuleNum | 1.3.6.1.4.1.6296.101.2.1.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of FAN module | ||||
| SsleDeviceTemperatureNum | 1.3.6.1.4.1.6296.101.2.1.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of temperature sensor | ||||
| SsleDeviceFanStartTemperature | 1.3.6.1.4.1.6296.101.2.1.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The temperature value which begins to turn fan. | ||||
| SsleDeviceFanStopTemperature | 1.3.6.1.4.1.6296.101.2.1.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The temperature value which stops fan. | ||||
| SsleDeviceJumboFrameStatus | 1.3.6.1.4.1.6296.101.2.1.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The global jumbo-frame status. 2011/01/20 V5924CR only support this.
| ||||
| SsleDeviceEnvironmentMonitoringStatus | 1.3.6.1.4.1.6296.101.2.1.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The alarm input mode of environment monitoring for AIU
| ||||
| NsleDeviceBaseControl | 1.3.6.1.4.1.6296.101.2.1.2 | |||
| SsleDeviceControlRequest | 1.3.6.1.4.1.6296.101.2.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current set an administrative state of FAN module
| ||||
| SsleDeviceControlStatus | 1.3.6.1.4.1.6296.101.2.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleDeviceControlTimer | 1.3.6.1.4.1.6296.101.2.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleDeviceControlTimeStamp | 1.3.6.1.4.1.6296.101.2.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleDeviceControlReqResult | 1.3.6.1.4.1.6296.101.2.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleDeviceControlFanStartTemperature | 1.3.6.1.4.1.6296.101.2.1.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleDeviceControlFanStopTemperature | 1.3.6.1.4.1.6296.101.2.1.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleDeviceControlJumboFrameStatus | 1.3.6.1.4.1.6296.101.2.1.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The global jumbo-frame status. 2011/01/20 V5924CR only support this.
| ||||
| SsleDeviceControlEnvironmentMonitoringStatus | 1.3.6.1.4.1.6296.101.2.1.2.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The alarm input mode of environment monitoring for AIU
| ||||
| NsleDeviceBaseNotification | 1.3.6.1.4.1.6296.101.2.1.3 | |||
| !sleDeviceTemperatureThresholdChanged | 1.3.6.1.4.1.6296.101.2.1.3.1 | |||
notification · current Description. | ||||
| !sleDeviceJumboFrameChanged | 1.3.6.1.4.1.6296.101.2.1.3.2 | |||
notification · current Description. | ||||
| !sleDeviceLEDTestChanged | 1.3.6.1.4.1.6296.101.2.1.3.3 | |||
notification · current Description. | ||||
| !sleDeviceEnvironmentMonitoringStatusChanged | 1.3.6.1.4.1.6296.101.2.1.3.4 | |||
notification · current setEnvironmentMonitoringStatus | ||||
| NsleEthernetPort | 1.3.6.1.4.1.6296.101.2.2 | |||
| TsleEthernetPortTable | 1.3.6.1.4.1.6296.101.2.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleEthernetPortEntry | 1.3.6.1.4.1.6296.101.2.2.1.1 | NA | ||
| CsleEthernetPortIndex | 1.3.6.1.4.1.6296.101.2.2.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The port index. | ||||
| CsleEthernetPortPhyIndex | 1.3.6.1.4.1.6296.101.2.2.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The physical index of entity mib. | ||||
| CsleEthernetPortType | 1.3.6.1.4.1.6296.101.2.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The type of port. It is not planed to made a automatic switchover between optical and electrical interfaces.
| ||||
| CsleEthernetPortAdminStatus | 1.3.6.1.4.1.6296.101.2.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The admin status of port.
| ||||
| CsleEthernetPortOperStatus | 1.3.6.1.4.1.6296.101.2.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The oper status of port
| ||||
| CsleEthernetPortTransmissionRate | 1.3.6.1.4.1.6296.101.2.2.1.1.6 | Integer32 (10 | 100 | 1000 | 2500 | 10000) | RO | |
column · Integer32 (10 | 100 | 1000 | 2500 | 10000) · read-only · current The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s | ||||
| CsleEthernetPortDuplexMode | 1.3.6.1.4.1.6296.101.2.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The duplex status of port.
| ||||
| CsleEthernetPortFlowControl | 1.3.6.1.4.1.6296.101.2.2.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The flow-control mode of port.
| ||||
| CsleEthernetPortNegotiationMode | 1.3.6.1.4.1.6296.101.2.2.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The Auto Negotiation mode of port.
| ||||
| CsleEthernetPortJumboFrameSize | 1.3.6.1.4.1.6296.101.2.2.1.1.10 | Integer32 (0 | 1518..12288) | RO | |
column · Integer32 (0 | 1518..12288) · read-only · current The jumbo frame's size of port. If the value is zero, it means that it is not set up. | ||||
| CsleEthernetPortSfpTransceiver | 1.3.6.1.4.1.6296.101.2.2.1.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleEthernetPortSfpVendorName | 1.3.6.1.4.1.6296.101.2.2.1.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetPortSfpVendorPartNumber | 1.3.6.1.4.1.6296.101.2.2.1.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetPortSfpVendorRevision | 1.3.6.1.4.1.6296.101.2.2.1.1.14 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetPortSfpVendorSerialNumber | 1.3.6.1.4.1.6296.101.2.2.1.1.15 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetPortSfpDateCode | 1.3.6.1.4.1.6296.101.2.2.1.1.16 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetPortPhysicalRemoteChassis | 1.3.6.1.4.1.6296.101.2.2.1.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetPortPhysicalRemoteSlot | 1.3.6.1.4.1.6296.101.2.2.1.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current Description. | ||||
| CsleEthernetPortPhysicalRemotePort | 1.3.6.1.4.1.6296.101.2.2.1.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current Description. | ||||
| CsleEthernetPortPhysicalLinkDiscoveryMode | 1.3.6.1.4.1.6296.101.2.2.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleEthernetPortSfpTransceiverType | 1.3.6.1.4.1.6296.101.2.2.1.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current The type of SFP transceiver.
| ||||
| CsleEthernetPortSfpTransceiverDetailType | 1.3.6.1.4.1.6296.101.2.2.1.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current The detailed-type of SFP transceiver.
| ||||
| CsleEthernetPortSlotIndex | 1.3.6.1.4.1.6296.101.2.2.1.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current The slot index. | ||||
| CsleEthernetPortSlotPortIndex | 1.3.6.1.4.1.6296.101.2.2.1.1.24 | Integer32 | RO | |
column · Integer32 · read-only · current The slot's port index. | ||||
| CsleEthernetPortAdminTransmissionRate | 1.3.6.1.4.1.6296.101.2.2.1.1.25 | Integer32 (10 | 100 | 1000 | 10000) | RO | |
column · Integer32 (10 | 100 | 1000 | 10000) · read-only · current The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s | ||||
| CsleEthernetPortAdminDuplexMode | 1.3.6.1.4.1.6296.101.2.2.1.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current The duplex status of port.
| ||||
| CsleEthernetPortAdminFlowControl | 1.3.6.1.4.1.6296.101.2.2.1.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current The flow-control mode of port.
| ||||
| CsleEthernetPortAdminNegotiationMode | 1.3.6.1.4.1.6296.101.2.2.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current The Auto Negotiation mode of port.
| ||||
| CsleEthernetPortAdminReason | 1.3.6.1.4.1.6296.101.2.2.1.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current The admin down reason of the interface. user : by user-configuration xllcf : by xllcf protocol all : both user and xllcf
| ||||
| CsleEthernetPortLinkCheckTimer | 1.3.6.1.4.1.6296.101.2.2.1.1.30 | Integer32 (20..1000) | RO | |
column · Integer32 (20..1000) · read-only · current The Link check internval of the interface | ||||
| CsleEthernetPortLinkDebounceTime | 1.3.6.1.4.1.6296.101.2.2.1.1.31 | Integer32 (0 | 10..5000) | RO | |
column · Integer32 (0 | 10..5000) · read-only · current The link debounce time of the interface | ||||
| CsleEthernetPortCpuStatisticsLimitUnicast | 1.3.6.1.4.1.6296.101.2.2.1.1.32 | Integer32 (0 | 10..100) | RO | |
column · Integer32 (0 | 10..100) · read-only · current The CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 ) | ||||
| CsleEthernetPortCpuStatisticsLimitMulticast | 1.3.6.1.4.1.6296.101.2.2.1.1.33 | Integer32 (0 | 10..100) | RO | |
column · Integer32 (0 | 10..100) · read-only · current et CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 ) | ||||
| CsleEthernetPortCpuStatisticsLimitBroadcast | 1.3.6.1.4.1.6296.101.2.2.1.1.34 | Integer32 (0 | 10..100) | RO | |
column · Integer32 (0 | 10..100) · read-only · current Set CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 ) | ||||
| CsleEthernetPortFloodBlockBroadcastState | 1.3.6.1.4.1.6296.101.2.2.1.1.35 | INTEGER | RO | |
column · INTEGER · read-only · current The Flood Block Broadcast State of the interface
| ||||
| CsleEthernetPortFloodBlockDlfState | 1.3.6.1.4.1.6296.101.2.2.1.1.36 | INTEGER | RO | |
column · INTEGER · read-only · current The Flood Block DLF State of the interface
| ||||
| NsleEthernetPortControl | 1.3.6.1.4.1.6296.101.2.2.2 | |||
| SsleEthernetPortControlRequest | 1.3.6.1.4.1.6296.101.2.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlStatus | 1.3.6.1.4.1.6296.101.2.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleEthernetPortControlTimer | 1.3.6.1.4.1.6296.101.2.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleEthernetPortControlTimeStamp | 1.3.6.1.4.1.6296.101.2.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleEthernetPortControlReqResult | 1.3.6.1.4.1.6296.101.2.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleEthernetPortControlIndex | 1.3.6.1.4.1.6296.101.2.2.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleEthernetPortControlType | 1.3.6.1.4.1.6296.101.2.2.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlAdminStatus | 1.3.6.1.4.1.6296.101.2.2.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlTransmissionRate | 1.3.6.1.4.1.6296.101.2.2.2.9 | Integer32 (10 | 100 | 1000 | 2500 | 10000) | RW | |
scalar · Integer32 (10 | 100 | 1000 | 2500 | 10000) · read-write · current Description.The speed of port. Unit is Mbit/s. This configurations are only useful for electrical interfaces. Optical - interfaces will always support 1000 MBIT/s | ||||
| SsleEthernetPortControlDuplexMode | 1.3.6.1.4.1.6296.101.2.2.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlFlowControl | 1.3.6.1.4.1.6296.101.2.2.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlNegotiationMode | 1.3.6.1.4.1.6296.101.2.2.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlJumboFrameSize | 1.3.6.1.4.1.6296.101.2.2.2.13 | Integer32 (0 | 1518..12288) | RW | |
scalar · Integer32 (0 | 1518..12288) · read-write · current Description. If the value is zero, it means erasing the set-up value. | ||||
| SsleEthernetPortControlPhysicalRemoteChassis | 1.3.6.1.4.1.6296.101.2.2.2.14 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Description. | ||||
| SsleEthernetPortControlPhysicalRemoteSlot | 1.3.6.1.4.1.6296.101.2.2.2.15 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleEthernetPortControlPhysicalRemotePort | 1.3.6.1.4.1.6296.101.2.2.2.16 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleEthernetPortControlPhysicalLinkDiscoveryMode | 1.3.6.1.4.1.6296.101.2.2.2.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetPortControlLinkCheckTimer | 1.3.6.1.4.1.6296.101.2.2.2.18 | Integer32 (20..1000) | RW | |
scalar · Integer32 (20..1000) · read-write · current The Link check internval of the interface | ||||
| SsleEthernetPortControlLinkDebounceTime | 1.3.6.1.4.1.6296.101.2.2.2.19 | Integer32 (0 | 10..5000) | RW | |
scalar · Integer32 (0 | 10..5000) · read-write · current The link debounce time of the interface | ||||
| SsleEthernetPortControlCpuStatisticsLimitUnicast | 1.3.6.1.4.1.6296.101.2.2.2.20 | Integer32 (0 | 10..100) | RW | |
scalar · Integer32 (0 | 10..100) · read-write · current The CPU statistics-limit Unicast Count ( the standard unit : 1000, 10 = 1000 ) | ||||
| SsleEthernetPortControlCpuStatisticsLimitMulticast | 1.3.6.1.4.1.6296.101.2.2.2.21 | Integer32 (0 | 10..100) | RW | |
scalar · Integer32 (0 | 10..100) · read-write · current et CPU statistics-limit Multicast Count ( the standard unit : 1000, 10 = 1000 ) | ||||
| SsleEthernetPortControlCpuStatisticsLimitBroadcast | 1.3.6.1.4.1.6296.101.2.2.2.22 | Integer32 (0 | 10..100) | RW | |
scalar · Integer32 (0 | 10..100) · read-write · current Set CPU statistics-limit Broadcast Count ( the standard unit : 1000, 10 = 1000 ) | ||||
| SsleEthernetPortControlFloodBlockBroadcastState | 1.3.6.1.4.1.6296.101.2.2.2.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Flood Block Broadcast State of the interface
| ||||
| SsleEthernetPortControlFloodBlockDlfState | 1.3.6.1.4.1.6296.101.2.2.2.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Flood Block DLF State of the interface
| ||||
| NsleEthernetPortNotification | 1.3.6.1.4.1.6296.101.2.2.3 | |||
| !sleEthernetPortChanged | 1.3.6.1.4.1.6296.101.2.2.3.1 | |||
notification · current Description.
| ||||
| !sleEthernetPortLinkChanged | 1.3.6.1.4.1.6296.101.2.2.3.2 | |||
notification · current setEthernetPortLinkProfile | ||||
| !sleEthernetPortCpuStatisticsLimitChanged | 1.3.6.1.4.1.6296.101.2.2.3.3 | |||
notification · current setEhternetPortCpuStatisticsLimitProfile | ||||
| !sleEthernetPortFloodBlockStateChanged | 1.3.6.1.4.1.6296.101.2.2.3.4 | |||
notification · current setEthernetPortFloodBlockStateProfile | ||||
| TsleEthernetPortDMITable | 1.3.6.1.4.1.6296.101.2.2.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleEthernetPortDMIEntry | 1.3.6.1.4.1.6296.101.2.2.4.1 | NA | ||
| CsleEthernetPortDMIIndex | 1.3.6.1.4.1.6296.101.2.2.4.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current Port Index. | ||||
| CsleEthernetPortDMITemper | 1.3.6.1.4.1.6296.101.2.2.4.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Internally measured module temperature. | ||||
| CsleEthernetPortDMIVoltage | 1.3.6.1.4.1.6296.101.2.2.4.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Internally measured supply voltage in transceiver. | ||||
| CsleEthernetPortDMITxBias | 1.3.6.1.4.1.6296.101.2.2.4.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Internally measured TX Bias Current. | ||||
| CsleEthernetPortDMITxPower | 1.3.6.1.4.1.6296.101.2.2.4.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Measured TX output power. | ||||
| CsleEthernetPortDMIRxPower | 1.3.6.1.4.1.6296.101.2.2.4.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Measured RX input power. | ||||
| TsleEthernetSFPTable | 1.3.6.1.4.1.6296.101.2.2.5 | NA | ||
table · not-accessible · current Description. | ||||
| RsleEthernetSFPEntry | 1.3.6.1.4.1.6296.101.2.2.5.1 | NA | ||
| CsleEthernetSfpIndex | 1.3.6.1.4.1.6296.101.2.2.5.1.1 | Integer32 (1..65556) | RO | |
column · Integer32 (1..65556) · read-only · current The SFP index. | ||||
| CsleEthernetSfpTransceiver | 1.3.6.1.4.1.6296.101.2.2.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of SFP
| ||||
| CsleEthernetSfpVendorName | 1.3.6.1.4.1.6296.101.2.2.5.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The vendor name of SFP | ||||
| CsleEthernetSfpVendorPartNumber | 1.3.6.1.4.1.6296.101.2.2.5.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The part number of SFP | ||||
| CsleEthernetSfpVendorRevision | 1.3.6.1.4.1.6296.101.2.2.5.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The revision of SFP | ||||
| CsleEthernetSfpVendorSerialNumber | 1.3.6.1.4.1.6296.101.2.2.5.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The serial number of SFP | ||||
| CsleEthernetSfpDateCode | 1.3.6.1.4.1.6296.101.2.2.5.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The manufacturing date of SFP | ||||
| CsleEthernetSfpTransceiverType | 1.3.6.1.4.1.6296.101.2.2.5.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The type of SFP transceiver.
| ||||
| CsleEthernetSfpTransceiverDetailType | 1.3.6.1.4.1.6296.101.2.2.5.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The detailed-type of SFP transceiver.
| ||||
| CsleEthernetSfpTransceiverCodes | 1.3.6.1.4.1.6296.101.2.2.5.1.10 | OCTET STRING (SIZE (1..8)) | RO | |
column · OCTET STRING (SIZE (1..8)) · read-only · current The transceiver codes. In case of SFP, reference SFP-8472 Rev 11.0 - Table 3.5: Transceiver codes (Address A0h) - Table 3.5a: SONET Compliance Specifiers (A0h) In case of XFP, reference XFP Specification Revision 4.5 (August 31,2005) - Table 40 Transceiver codes | ||||
| CsleEthernetSfpSpeed | 1.3.6.1.4.1.6296.101.2.2.5.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The speed of SFP | ||||
| CsleEthernetSfpLength | 1.3.6.1.4.1.6296.101.2.2.5.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The length of SFP | ||||
| CsleEthernetSfpWaveLength | 1.3.6.1.4.1.6296.101.2.2.5.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current The wavelength of SFP | ||||
| CsleEthernetSfpMultimodeLengthOm1 | 1.3.6.1.4.1.6296.101.2.2.5.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The Flame rating is 62.5um(OM1). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua. | ||||
| CsleEthernetSfpMultimodeLengthOm2 | 1.3.6.1.4.1.6296.101.2.2.5.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The Flame rating is 50um(OM2). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua. | ||||
| CsleEthernetSfpMultimodeLengthOm3 | 1.3.6.1.4.1.6296.101.2.2.5.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current The Flame rating is 50um(OM3). This is used only for 10G SFP module with multi-mode. ref) 50/125 Multimode Fiber Optic 50/125 is one of the most commonly used multimode optical fiber, the other commonly used is 62.5/125 types. There is a special kind 50/125 multimode fibers, which is called OM3 50/125. People usually refer 62.5/125 as the OM1 MMF, common type 50/125 MMF as OM2, OM3 is also 50/125, but it is different from OM2 because it support 10Gig data transmission. The OM3 50/125 fiber optic cable is also called laser optimized fiber cable. Both OM1 and OM2 multimode cables use the orange color jacket (standard practice for commonly used indoor multimode), OM3 use a special color, which is called Aqua. | ||||
| CsleEthernetSfpTransceiverDetailTypeStr | 1.3.6.1.4.1.6296.101.2.2.5.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetSfpTransceiverLengthStr | 1.3.6.1.4.1.6296.101.2.2.5.1.18 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetSfpWaveLengthStr | 1.3.6.1.4.1.6296.101.2.2.5.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetSfpConnectorType | 1.3.6.1.4.1.6296.101.2.2.5.1.20 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleEthernetSfpDdmState | 1.3.6.1.4.1.6296.101.2.2.5.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current The DDM state
| ||||
| CsleEthernetSfpNegoState | 1.3.6.1.4.1.6296.101.2.2.5.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current The Nego state
| ||||
| NsleEthernetSFPControl | 1.3.6.1.4.1.6296.101.2.2.6 | |||
| SsleEthernetSFPControlRequest | 1.3.6.1.4.1.6296.101.2.2.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetSFPControlStatus | 1.3.6.1.4.1.6296.101.2.2.6.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleEthernetSFPControlTimer | 1.3.6.1.4.1.6296.101.2.2.6.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleEthernetSFPControlTimeStamp | 1.3.6.1.4.1.6296.101.2.2.6.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleEthernetSFPControlReqResult | 1.3.6.1.4.1.6296.101.2.2.6.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleEthernetSFPControlIndex | 1.3.6.1.4.1.6296.101.2.2.6.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleEthernetSfpControlDdmState | 1.3.6.1.4.1.6296.101.2.2.6.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| NsleEthernetSFPNotification | 1.3.6.1.4.1.6296.101.2.2.7 | |||
| !sleEthernetSFPRemoteReset | 1.3.6.1.4.1.6296.101.2.2.7.1 | |||
notification · current setSFPRemoteReset | ||||
| !sleEthernetSFPDdmState | 1.3.6.1.4.1.6296.101.2.2.7.2 | |||
notification · current setSFPDdmState | ||||
| TsleEthernetSFPThresholdTable | 1.3.6.1.4.1.6296.101.2.2.8 | NA | ||
table · not-accessible · current Description. | ||||
| RsleEthernetSFPThresholdEntry | 1.3.6.1.4.1.6296.101.2.2.8.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleEthernetSFPThresholdIfIndex | 1.3.6.1.4.1.6296.101.2.2.8.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The index of the interface | ||||
| CsleEthernetSFPThresholdType | 1.3.6.1.4.1.6296.101.2.2.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The Type of Threshold
| ||||
| CsleEthernetSFPThresholdSfpLow | 1.3.6.1.4.1.6296.101.2.2.8.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Threshold Low Value of Sfp | ||||
| CsleEthernetSFPThresholdSfpHigh | 1.3.6.1.4.1.6296.101.2.2.8.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Threshold High Value of Sfp | ||||
| CsleEthernetSFPThresholdSystemLow | 1.3.6.1.4.1.6296.101.2.2.8.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Threshold Low Value of System | ||||
| CsleEthernetSFPThresholdSystemHigh | 1.3.6.1.4.1.6296.101.2.2.8.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The Threshold High Value of System | ||||
| NsleEthernetSFPThresholdControl | 1.3.6.1.4.1.6296.101.2.2.9 | |||
| SsleEthernetSFPThresholdControlRequest | 1.3.6.1.4.1.6296.101.2.2.9.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleEthernetSFPThresholdControlStatus | 1.3.6.1.4.1.6296.101.2.2.9.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleEthernetSFPThresholdControlTimer | 1.3.6.1.4.1.6296.101.2.2.9.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleEthernetSFPThresholdControlTimeStamp | 1.3.6.1.4.1.6296.101.2.2.9.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleEthernetSFPThresholdControlReqResult | 1.3.6.1.4.1.6296.101.2.2.9.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleEthernetSFPThresholdControlIfIndex | 1.3.6.1.4.1.6296.101.2.2.9.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The index of the interface | ||||
| SsleEthernetSFPThresholdControlType | 1.3.6.1.4.1.6296.101.2.2.9.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Type of Threshold
| ||||
| SsleEthernetSFPThresholdControlSfpLow | 1.3.6.1.4.1.6296.101.2.2.9.8 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Threshold Low Value of Sfp | ||||
| SsleEthernetSFPThresholdControlSfpHigh | 1.3.6.1.4.1.6296.101.2.2.9.9 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Threshold High Value of Sfp | ||||
| SsleEthernetSFPThresholdControlSystemLow | 1.3.6.1.4.1.6296.101.2.2.9.10 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Threshold Low Value of System | ||||
| SsleEthernetSFPThresholdControlSystemHigh | 1.3.6.1.4.1.6296.101.2.2.9.11 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Threshold High Value of System | ||||
| NsleEthernetSFPThresholdNotification | 1.3.6.1.4.1.6296.101.2.2.10 | |||
| !sleEthernetSFPThresholdSfpChanged | 1.3.6.1.4.1.6296.101.2.2.10.1 | |||
notification · current setSfpThresholdModule | ||||
| !sleEthernetSFPThresholdSystemChanged | 1.3.6.1.4.1.6296.101.2.2.10.2 | |||
notification · current setSystemThresholdModule | ||||
| !sleEthernetSFPThresholdDestroyed | 1.3.6.1.4.1.6296.101.2.2.10.3 | |||
notification · current delThresholdModule | ||||
| NslePower | 1.3.6.1.4.1.6296.101.2.3 | |||
| TslePowerTable | 1.3.6.1.4.1.6296.101.2.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RslePowerEntry | 1.3.6.1.4.1.6296.101.2.3.1.1 | NA | ||
| CslePowerIndex | 1.3.6.1.4.1.6296.101.2.3.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. | ||||
| CslePowerPhyIndex | 1.3.6.1.4.1.6296.101.2.3.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current entPhysicalIndex of Power Modules (0: Internal, -1: uninstalled) | ||||
| CslePowerState | 1.3.6.1.4.1.6296.101.2.3.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Power status information.
| ||||
| CslePowerType | 1.3.6.1.4.1.6296.101.2.3.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Power type information.
| ||||
| CslePowerPSUType | 1.3.6.1.4.1.6296.101.2.3.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The type of Power Supply Unit.(DC)
| ||||
| NsleFanModule | 1.3.6.1.4.1.6296.101.2.4 | |||
| TsleFanModuleTable | 1.3.6.1.4.1.6296.101.2.4.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleFanModuleEntry | 1.3.6.1.4.1.6296.101.2.4.1.1 | NA | ||
| CsleFanModuleIndex | 1.3.6.1.4.1.6296.101.2.4.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. | ||||
| CsleFanModulePhyIndex | 1.3.6.1.4.1.6296.101.2.4.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current entPhysicalIndex of FAN Modules. (0: Internal, -1: uninstalled) | ||||
| CsleFanModuleUnitNum | 1.3.6.1.4.1.6296.101.2.4.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The number of unit in FAN module | ||||
| CsleFanModuleAdminState | 1.3.6.1.4.1.6296.101.2.4.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current An administrative state of FAN module
| ||||
| CsleFanModuleSpeedThreshold | 1.3.6.1.4.1.6296.101.2.4.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Fan-speed threshold | ||||
| NsleFanModuleControl | 1.3.6.1.4.1.6296.101.2.4.2 | |||
| SsleFanModuleControlRequest | 1.3.6.1.4.1.6296.101.2.4.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current set an administrative state of FAN module
| ||||
| SsleFanModuleControlStatus | 1.3.6.1.4.1.6296.101.2.4.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleFanModuleControlTimer | 1.3.6.1.4.1.6296.101.2.4.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleFanModuleControlTimeStamp | 1.3.6.1.4.1.6296.101.2.4.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleFanModuleControlReqResult | 1.3.6.1.4.1.6296.101.2.4.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleFanModuleControlIndex | 1.3.6.1.4.1.6296.101.2.4.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleFanModuleControlAdminState | 1.3.6.1.4.1.6296.101.2.4.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current An administrative state of FAN module
| ||||
| SsleFanModuleControlSpeedThreshold | 1.3.6.1.4.1.6296.101.2.4.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current Fan-speed threshold | ||||
| NsleFanModuleNotification | 1.3.6.1.4.1.6296.101.2.4.3 | |||
| !sleFanAdminStateChanged | 1.3.6.1.4.1.6296.101.2.4.3.1 | |||
notification · current Description. | ||||
| !sleFanSpeedThresholdChanged | 1.3.6.1.4.1.6296.101.2.4.3.2 | |||
notification · current Description. | ||||
| NsleFanUnit | 1.3.6.1.4.1.6296.101.2.5 | |||
| TsleFanUnitTable | 1.3.6.1.4.1.6296.101.2.5.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleFanUnitEntry | 1.3.6.1.4.1.6296.101.2.5.1.1 | NA | ||
| CsleFanUnitIndex | 1.3.6.1.4.1.6296.101.2.5.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current A unique number in FAN module | ||||
| CsleFanUnitOperState | 1.3.6.1.4.1.6296.101.2.5.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current An operational state of FAN unit
| ||||
| CsleFanUnitSpeed | 1.3.6.1.4.1.6296.101.2.5.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Speed of FAN unit | ||||
| NsleTemperature | 1.3.6.1.4.1.6296.101.2.6 | |||
| TsleTemperatureTable | 1.3.6.1.4.1.6296.101.2.6.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleTemperatureEntry | 1.3.6.1.4.1.6296.101.2.6.1.1 | NA | ||
| CsleTemperatureIndex | 1.3.6.1.4.1.6296.101.2.6.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. | ||||
| CsleTemperatureState | 1.3.6.1.4.1.6296.101.2.6.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Temperature status information
| ||||
| CsleTemperatureValue | 1.3.6.1.4.1.6296.101.2.6.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The value of temperature sensor. (unit: C) | ||||
| CsleTemperatureHighThreshold | 1.3.6.1.4.1.6296.101.2.6.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The High threshold of temperature. | ||||
| CsleTemperatureLowThreshold | 1.3.6.1.4.1.6296.101.2.6.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The Low threshold of temperature. | ||||
| CsleTemperatureWarnHighThreshold | 1.3.6.1.4.1.6296.101.2.6.1.1.6 | Integer32 (-40..100) | RO | |
column · Integer32 (-40..100) · read-only · current The High threshold of temperature. | ||||
| CsleTemperatureWarnLowThreshold | 1.3.6.1.4.1.6296.101.2.6.1.1.7 | Integer32 (-40..100) | RO | |
column · Integer32 (-40..100) · read-only · current The Low threshold of temperature. | ||||
| CsleTemperatureWarnDuration | 1.3.6.1.4.1.6296.101.2.6.1.1.8 | Integer32 (0..300) | RO | |
column · Integer32 (0..300) · read-only · current Duration-time units by the 5 sec. 0: Clear threshold. | ||||
| CsleTemperatureAlarmHighThreshold | 1.3.6.1.4.1.6296.101.2.6.1.1.9 | Integer32 (-40..100) | RO | |
column · Integer32 (-40..100) · read-only · current The High threshold of temperature. | ||||
| CsleTemperatureAlarmLowThreshold | 1.3.6.1.4.1.6296.101.2.6.1.1.10 | Integer32 (-40..100) | RO | |
column · Integer32 (-40..100) · read-only · current The Low threshold of temperature. | ||||
| CsleTemperatureAlarmDuration | 1.3.6.1.4.1.6296.101.2.6.1.1.11 | Integer32 (0..300) | RO | |
column · Integer32 (0..300) · read-only · current Duration-time units by the 5 sec. 0: Clear threshold. | ||||
| NsleTemperatureControl | 1.3.6.1.4.1.6296.101.2.6.2 | |||
| SsleTemperatureControlRequest | 1.3.6.1.4.1.6296.101.2.6.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current set an administrative state of FAN module
| ||||
| SsleTemperatureControlStatus | 1.3.6.1.4.1.6296.101.2.6.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleTemperatureControlTimer | 1.3.6.1.4.1.6296.101.2.6.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleTemperatureControlTimeStamp | 1.3.6.1.4.1.6296.101.2.6.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleTemperatureControlReqResult | 1.3.6.1.4.1.6296.101.2.6.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleTemperatureControlIndex | 1.3.6.1.4.1.6296.101.2.6.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Temperature index | ||||
| SsleTemperatureControlHighThreshold | 1.3.6.1.4.1.6296.101.2.6.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The High threshold of temperature. | ||||
| SsleTemperatureControlLowThreshold | 1.3.6.1.4.1.6296.101.2.6.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Low threshold of temperature. | ||||
| SsleTemperatureControlDuration | 1.3.6.1.4.1.6296.101.2.6.2.9 | Integer32 (0..300) | RW | |
scalar · Integer32 (0..300) · read-write · current Duration-time units by the 5 sec. 0: Clear threshold. | ||||
| NsleTemperatureNotification | 1.3.6.1.4.1.6296.101.2.6.3 | |||
| !sleTemperatureThresholdChanged | 1.3.6.1.4.1.6296.101.2.6.3.1 | |||
notification · current Description.
| ||||
| NsleBattery | 1.3.6.1.4.1.6296.101.2.7 | |||
| TsleBatteryTable | 1.3.6.1.4.1.6296.101.2.7.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBatteryEntry | 1.3.6.1.4.1.6296.101.2.7.1.1 | NA | ||
| CsleBatteryIndex | 1.3.6.1.4.1.6296.101.2.7.1.1.1 | INTEGER (1..256) | RO | |
column · INTEGER (1..256) · read-only · current The index of battery charger. | ||||
| CsleOperationPowerType | 1.3.6.1.4.1.6296.101.2.7.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Power Type.
| ||||
| CsleOperationPowerInfo | 1.3.6.1.4.1.6296.101.2.7.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Operation Power Info. | ||||
| CslePSUACPowerState | 1.3.6.1.4.1.6296.101.2.7.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Power State.
| ||||
| CslePSUTemperture | 1.3.6.1.4.1.6296.101.2.7.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Temperture. | ||||
| CslePSUTempThreshold | 1.3.6.1.4.1.6296.101.2.7.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Temperture Threshold. | ||||
| CslePSUOutVoltage | 1.3.6.1.4.1.6296.101.2.7.1.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Voltage. | ||||
| CslePSUOverTemp | 1.3.6.1.4.1.6296.101.2.7.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CslePSUFirmwareVer | 1.3.6.1.4.1.6296.101.2.7.1.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The firmware version of battery charger for communication to system. | ||||
| CsleRBUEquipState | 1.3.6.1.4.1.6296.101.2.7.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Equipment State.
| ||||
| CsleRBUModeStaus | 1.3.6.1.4.1.6296.101.2.7.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Description. | ||||
| CsleRBUTemperature1 | 1.3.6.1.4.1.6296.101.2.7.1.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Description. | ||||
| CsleRBUTemperature2 | 1.3.6.1.4.1.6296.101.2.7.1.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current . | ||||
| CsleRBUTempLowThreshold | 1.3.6.1.4.1.6296.101.2.7.1.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current RBU Low Temperature Threshold. | ||||
| CsleRBUOutVoltage | 1.3.6.1.4.1.6296.101.2.7.1.1.15 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current RBU Out Voltage. | ||||
| CsleRBUChargeCurrent | 1.3.6.1.4.1.6296.101.2.7.1.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current Current Charge. | ||||
| CsleRBURemainCapacity | 1.3.6.1.4.1.6296.101.2.7.1.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current Remain Capacity. | ||||
| CsleRBUOverTemp | 1.3.6.1.4.1.6296.101.2.7.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current The state of Temperature over.
| ||||
| CsleBatteryLow | 1.3.6.1.4.1.6296.101.2.7.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current Battery state.
| ||||
| CsleRBUTempHighThreshold | 1.3.6.1.4.1.6296.101.2.7.1.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current RBU High Temperature Threshold. | ||||
| CsleRBUBTStatus | 1.3.6.1.4.1.6296.101.2.7.1.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleRBUBTThreshold | 1.3.6.1.4.1.6296.101.2.7.1.1.22 | Integer32 | RO | |
column · Integer32 · read-only · current Description. | ||||
| CsleRBURechargeVoltage | 1.3.6.1.4.1.6296.101.2.7.1.1.23 | Integer32 | RO | |
column · Integer32 · read-only · current Description. | ||||
| CsleBatteryCellStatus | 1.3.6.1.4.1.6296.101.2.7.1.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current Description.
| ||||
| CsleBPSUACHardwareVer | 1.3.6.1.4.1.6296.101.2.7.1.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current Description. | ||||
| NsleBatteryControl | 1.3.6.1.4.1.6296.101.2.7.2 | |||
| SsleBatteryControlRequest | 1.3.6.1.4.1.6296.101.2.7.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleBatteryControlStatus | 1.3.6.1.4.1.6296.101.2.7.2.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlTimer | 1.3.6.1.4.1.6296.101.2.7.2.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlTimeStamp | 1.3.6.1.4.1.6296.101.2.7.2.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlReqResult | 1.3.6.1.4.1.6296.101.2.7.2.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlRBUBTStatus | 1.3.6.1.4.1.6296.101.2.7.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleBatteryControlRBUBTThreshold | 1.3.6.1.4.1.6296.101.2.7.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlRBURechargeVoltage | 1.3.6.1.4.1.6296.101.2.7.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlTemperThresh1 | 1.3.6.1.4.1.6296.101.2.7.2.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| SsleBatteryControlTemperThresh2 | 1.3.6.1.4.1.6296.101.2.7.2.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current Description. | ||||
| NsleBatteryNotification | 1.3.6.1.4.1.6296.101.2.7.3 | |||
| !sleBatteryForceChargeChanged | 1.3.6.1.4.1.6296.101.2.7.3.1 | |||
notification · current Description. | ||||
| !sleBatteryChargingStartChanged | 1.3.6.1.4.1.6296.101.2.7.3.2 | |||
notification · current Description. | ||||
| !sleBatteryForceChargeNonStopChanged | 1.3.6.1.4.1.6296.101.2.7.3.3 | |||
notification · current Description. | ||||
| !sleBatteryRBUBTStatusChanged | 1.3.6.1.4.1.6296.101.2.7.3.4 | |||
notification · current Description. | ||||
| !sleBatteryRBUBTThresholdChanged | 1.3.6.1.4.1.6296.101.2.7.3.5 | |||
notification · current Description. | ||||
| !sleBatteryRBURechargeVoltageChanged | 1.3.6.1.4.1.6296.101.2.7.3.6 | |||
notification · current Description. | ||||
| !sleBatteryPsuAcTemperThreshChanged | 1.3.6.1.4.1.6296.101.2.7.3.7 | |||
notification · current Description. | ||||
| !sleBatteryRBUTemperThreshChanged | 1.3.6.1.4.1.6296.101.2.7.3.8 | |||
notification · current Description. | ||||
| TsleBatteryBackupTable | 1.3.6.1.4.1.6296.101.2.7.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBatteryBackupEntry | 1.3.6.1.4.1.6296.101.2.7.4.1 | NA | ||
| CsleBatteryBackupFile | 1.3.6.1.4.1.6296.101.2.7.4.1.1 | OCTET STRING (SIZE (1..64)) | RO | |
column · OCTET STRING (SIZE (1..64)) · read-only · current Description. | ||||
| NsleBatteryBackupControl | 1.3.6.1.4.1.6296.101.2.7.5 | |||
| SsleBatteryBackupControlRequest | 1.3.6.1.4.1.6296.101.2.7.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleBatteryBackupControlStatus | 1.3.6.1.4.1.6296.101.2.7.5.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleBatteryBackupControlTimer | 1.3.6.1.4.1.6296.101.2.7.5.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current Description. | ||||
| SsleBatteryBackupControlTimeStamp | 1.3.6.1.4.1.6296.101.2.7.5.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleBatteryBackupControlReqResult | 1.3.6.1.4.1.6296.101.2.7.5.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleBatteryBackupControlServerIP | 1.3.6.1.4.1.6296.101.2.7.5.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current Description. | ||||
| SsleBatteryBackupControlUserID | 1.3.6.1.4.1.6296.101.2.7.5.7 | OCTET STRING (SIZE (1..64)) | RW | |
scalar · OCTET STRING (SIZE (1..64)) · read-write · current Description. | ||||
| SsleBatteryBackupControlPassword | 1.3.6.1.4.1.6296.101.2.7.5.8 | OCTET STRING (SIZE (1..64)) | RW | |
scalar · OCTET STRING (SIZE (1..64)) · read-write · current Description. | ||||
| SsleBatteryBackupControlFlag | 1.3.6.1.4.1.6296.101.2.7.5.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleBatteryBackupControlLocalFile | 1.3.6.1.4.1.6296.101.2.7.5.10 | OCTET STRING (SIZE (1..64)) | RW | |
scalar · OCTET STRING (SIZE (1..64)) · read-write · current Description. | ||||
| SsleBatteryBackupControlRemoteFile | 1.3.6.1.4.1.6296.101.2.7.5.11 | OCTET STRING (SIZE (1..64)) | RW | |
scalar · OCTET STRING (SIZE (1..64)) · read-write · current Description. | ||||
| NsleBatterBackupNotification | 1.3.6.1.4.1.6296.101.2.7.6 | |||
| !sleBatteryBackupProfileChanged | 1.3.6.1.4.1.6296.101.2.7.6.1 | |||
notification · current Description.
| ||||
| !sleBatteryBackupUpgraded | 1.3.6.1.4.1.6296.101.2.7.6.2 | |||
notification · current Description. | ||||
| !sleBatteryBackupTableCleared | 1.3.6.1.4.1.6296.101.2.7.6.3 | |||
notification · current Description. | ||||
| NsleDoor | 1.3.6.1.4.1.6296.101.2.8 | |||
| NsleDoorInfo | 1.3.6.1.4.1.6296.101.2.8.1 | |||
| SsleDoorStatus | 1.3.6.1.4.1.6296.101.2.8.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Description.
| ||||
| NsleCpu | 1.3.6.1.4.1.6296.101.2.9 | |||
| NsleCpuInfo | 1.3.6.1.4.1.6296.101.2.9.1 | |||
| SsleCpuProcessor | 1.3.6.1.4.1.6296.101.2.9.1.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Description. | ||||
| SsleCpuModel | 1.3.6.1.4.1.6296.101.2.9.1.2 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Description. | ||||
| SsleCpuRevision | 1.3.6.1.4.1.6296.101.2.9.1.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Description. | ||||
| SsleCpuBogomips | 1.3.6.1.4.1.6296.101.2.9.1.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Description. | ||||
| SsleCpuManufacturer | 1.3.6.1.4.1.6296.101.2.9.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Description. | ||||
| SsleCpuClock | 1.3.6.1.4.1.6296.101.2.9.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Description. | ||||
| SsleCpuBusClock | 1.3.6.1.4.1.6296.101.2.9.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Description. | ||||
| NsleClockModule | 1.3.6.1.4.1.6296.101.2.10 | |||
| TsleClockModuleTable | 1.3.6.1.4.1.6296.101.2.10.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleClockModuleEntry | 1.3.6.1.4.1.6296.101.2.10.1.1 | NA | ||
| CsleClockModuleIndex | 1.3.6.1.4.1.6296.101.2.10.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current A unique value, greater than zero, for each module. It is recommended that values are assigned contiguously starting from 1. | ||||
| CsleClockModuleBoardId | 1.3.6.1.4.1.6296.101.2.10.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indication of the board identifier.
| ||||
| CsleClockModuleInstallStatus | 1.3.6.1.4.1.6296.101.2.10.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The install status of clock module.
| ||||
| CsleClockModuleInitStatus | 1.3.6.1.4.1.6296.101.2.10.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The initialization status of clock module.
| ||||
| CsleClockModuleOPMode | 1.3.6.1.4.1.6296.101.2.10.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The CM operating mode
| ||||
| NsleClockInfo | 1.3.6.1.4.1.6296.101.2.10.2 | |||
| SsleClockInfoInSrcType | 1.3.6.1.4.1.6296.101.2.10.2.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The clock input source type.
| ||||
| SsleClockInfoInSrcStatus | 1.3.6.1.4.1.6296.101.2.10.2.2 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The input source is Valid or Invalid.
| ||||
| SsleClockInfoInSrcAISStatus | 1.3.6.1.4.1.6296.101.2.10.2.3 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The AIS is detected or not detected.
| ||||
| SsleClockInfoInSrcLoSStatus | 1.3.6.1.4.1.6296.101.2.10.2.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The LoS is detected or not detected
| ||||
| SsleClockInfoInSrcLDSCStatus | 1.3.6.1.4.1.6296.101.2.10.2.5 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The Line Driver Short Circuit is detected or not detected
| ||||
| SsleClockInfoInSrcNtrClockType | 1.3.6.1.4.1.6296.101.2.10.2.6 | Bits | AN | |
scalar · Bits · accessible-for-notify · current The ntr clock is changed.
| ||||
| NsleSlot | 1.3.6.1.4.1.6296.101.2.11 | |||
| NsleSlotSystemInfo | 1.3.6.1.4.1.6296.101.2.11.1 | |||
| TsleSlotSystemInfoTable | 1.3.6.1.4.1.6296.101.2.11.1.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleSlotSystemInfoEntry | 1.3.6.1.4.1.6296.101.2.11.1.1.1 | NA | ||
| CsleSlotSystemIndex | 1.3.6.1.4.1.6296.101.2.11.1.1.1.1 | Integer32 (1..8) | RO | |
column · Integer32 (1..8) · read-only · current The system slot index. | ||||
| CsleSlotSystemUptime | 1.3.6.1.4.1.6296.101.2.11.1.1.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time since the network management portion of the system was last re-initialized. | ||||
| CsleSlotSystemModelName | 1.3.6.1.4.1.6296.101.2.11.1.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The model name. | ||||
| CsleSlotSystemSerialNumber | 1.3.6.1.4.1.6296.101.2.11.1.1.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The serial number | ||||
| CsleSlotSystemHWVersion | 1.3.6.1.4.1.6296.101.2.11.1.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The H/W version. | ||||
| CsleSlotSystemBLVersion | 1.3.6.1.4.1.6296.101.2.11.1.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The boot loader¡¯s S/W version. | ||||
| CsleSlotSystemSWCompatibility | 1.3.6.1.4.1.6296.101.2.11.1.1.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The system compatibility. | ||||
| CsleSlotSystemOSVersion | 1.3.6.1.4.1.6296.101.2.11.1.1.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The version information of current os. | ||||
| CsleSlotSystemMacAddress | 1.3.6.1.4.1.6296.101.2.11.1.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The system¡¯s MAC address. | ||||
| CsleSlotSystemCPULoadAll | 1.3.6.1.4.1.6296.101.2.11.1.1.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The CPU all load for 5/60/600 second. (unit: 0.01%) | ||||
| CsleSlotSystemCPULoadInterrupt | 1.3.6.1.4.1.6296.101.2.11.1.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The CPU interrupt load for 5/60/600 second. (unit: 0.01%) | ||||
| CsleSlotSystemMemoryTotal | 1.3.6.1.4.1.6296.101.2.11.1.1.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total memory size (unit: kb) | ||||
| CsleSlotSystemMemoryFree | 1.3.6.1.4.1.6296.101.2.11.1.1.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The freed memory size (unit: kb) | ||||
| CsleSlotSystemMemoryShared | 1.3.6.1.4.1.6296.101.2.11.1.1.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current The shared memory size (unit: kb) | ||||
| CsleSlotSystemMemoryBuffers | 1.3.6.1.4.1.6296.101.2.11.1.1.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current The buffer size (unit: kb) | ||||
| CsleSlotSystemMemoryCached | 1.3.6.1.4.1.6296.101.2.11.1.1.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current The cached memory size (unit: kb) | ||||
| CsleSlotSystemMemorySwapTotal | 1.3.6.1.4.1.6296.101.2.11.1.1.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The total swap memory size (unit: kb) | ||||
| CsleSlotSystemMemorySwapFree | 1.3.6.1.4.1.6296.101.2.11.1.1.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current The freed swap memory size (unit: kb) | ||||
| CsleSlotSystemBootReason | 1.3.6.1.4.1.6296.101.2.11.1.1.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current The system slot boot reason.
| ||||
| CsleSlotSystemBootTime | 1.3.6.1.4.1.6296.101.2.11.1.1.1.20 | Gauge32 | RO | |
column · Gauge32 · read-only · current The system slot boot time. The time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds.
| ||||
| CsleSlotSystemVoltage | 1.3.6.1.4.1.6296.101.2.11.1.1.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current The system slot voltage.
| ||||
| CsleSlotSystemPowerLevelStatus | 1.3.6.1.4.1.6296.101.2.11.1.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current PCB Power level status.
| ||||
| CsleSlotSystemInfoLEDStatus | 1.3.6.1.4.1.6296.101.2.11.1.1.1.23 | Bits | RO | |
column · Bits · read-only · current The LED status of each slot.
| ||||
| CsleSlotSystemInfoPackageVersion | 1.3.6.1.4.1.6296.101.2.11.1.1.1.24 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The applied package revision. | ||||
| CsleSlotSystemInfoManufacturer | 1.3.6.1.4.1.6296.101.2.11.1.1.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Ths manufacturer name and country. | ||||
| CsleSlotSystemInfoManufactureDate | 1.3.6.1.4.1.6296.101.2.11.1.1.1.26 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Ths manufacture date. | ||||
| CsleSlotSystemCPULoadHighThreshold | 1.3.6.1.4.1.6296.101.2.11.1.1.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current The high threshold of CPU load (70:default) | ||||
| CsleSlotSystemCPULoadHighThresholdTimer | 1.3.6.1.4.1.6296.101.2.11.1.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current The high threshold timer of CPU load (sec) (60:default)
| ||||
| CsleSlotSystemCPULoadLowThreshold | 1.3.6.1.4.1.6296.101.2.11.1.1.1.29 | Integer32 | RO | |
column · Integer32 · read-only · current The low threshold of CPU load (30:default) | ||||
| CsleSlotSystemCPULoadLowThresholdTimer | 1.3.6.1.4.1.6296.101.2.11.1.1.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current The low threshold timer of CPU load (sec) (60:default)
| ||||
| CsleSlotSystemCPULoadCurrent | 1.3.6.1.4.1.6296.101.2.11.1.1.1.31 | Integer32 | RO | |
column · Integer32 · read-only · current The CPU load currnet value (only used for trap) | ||||
| CsleSlotSystemCPUOverallStatus | 1.3.6.1.4.1.6296.101.2.11.1.1.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current The CPU Overall status for SFU & IU
| ||||
| CsleSlotSystemTemperOverallStatus | 1.3.6.1.4.1.6296.101.2.11.1.1.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current The Temperature Overall status for SFU & IU
| ||||
| NsleSlotSystemControl | 1.3.6.1.4.1.6296.101.2.11.1.2 | |||
| SsleSlotSystemControlRequest | 1.3.6.1.4.1.6296.101.2.11.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleSlotSystemControlStatus | 1.3.6.1.4.1.6296.101.2.11.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleSlotSystemControlTimer | 1.3.6.1.4.1.6296.101.2.11.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleSlotSystemControlTimeStamp | 1.3.6.1.4.1.6296.101.2.11.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleSlotSystemControlReqResult | 1.3.6.1.4.1.6296.101.2.11.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleSlotSystemControlSlotIndex | 1.3.6.1.4.1.6296.101.2.11.1.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The system slot index. | ||||
| SsleSlotSystemControlCPULoadHighThreshold | 1.3.6.1.4.1.6296.101.2.11.1.2.7 | Integer32 (21..100) | RW | |
scalar · Integer32 (21..100) · read-write · current The high threshold of CPU load (70:default) | ||||
| SsleSlotSystemControlCPULoadHighThresholdTimer | 1.3.6.1.4.1.6296.101.2.11.1.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The high threshold timer of CPU load (sec) (60:default)
| ||||
| SsleSlotSystemControlCPULoadLowThreshold | 1.3.6.1.4.1.6296.101.2.11.1.2.9 | Integer32 (20..100) | RW | |
scalar · Integer32 (20..100) · read-write · current The low threshold of CPU load (30:default) | ||||
| SsleSlotSystemControlCPULoadLowThresholdTimer | 1.3.6.1.4.1.6296.101.2.11.1.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The low threshold timer of CPU load (sec) (60:default)
| ||||
| NsleSlotSystemNotification | 1.3.6.1.4.1.6296.101.2.11.1.3 | |||
| !sleSlotSystemRestart | 1.3.6.1.4.1.6296.101.2.11.1.3.1 | |||
notification · current Description. | ||||
| !sleSlotSystemCPULoadChagned | 1.3.6.1.4.1.6296.101.2.11.1.3.2 | |||
notification · current setSlotCpuloadThreshold
| ||||
| !sleSlotSystemCPULoadDeleted | 1.3.6.1.4.1.6296.101.2.11.1.3.3 | |||
notification · current delSlotCpuloadThreshold | ||||
| NsleSlotStatusInfo | 1.3.6.1.4.1.6296.101.2.11.2 | |||
| TsleSlotStatusInfoTable | 1.3.6.1.4.1.6296.101.2.11.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleSlotStatusInfoEntry | 1.3.6.1.4.1.6296.101.2.11.2.1.1 | NA | ||
| CsleSlotStatusPlan | 1.3.6.1.4.1.6296.101.2.11.2.1.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current Planning status of slot.
| ||||
| CsleSlotStatusPlanCardType | 1.3.6.1.4.1.6296.101.2.11.2.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Planning card type status of slot.
| ||||
| CsleSlotStatusCurrentInstall | 1.3.6.1.4.1.6296.101.2.11.2.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Currently installation status of slot.
| ||||
| CsleSlotStatusCurrentInstallCardType | 1.3.6.1.4.1.6296.101.2.11.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Currently installation card type status of slot.
| ||||
| CsleSlotStatusCardOperation | 1.3.6.1.4.1.6296.101.2.11.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Currently operation status of slot.
| ||||
| CsleSlotStatusLock | 1.3.6.1.4.1.6296.101.2.11.2.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Lock status of slot.
| ||||
| CsleSlotStatusUpgradeMode | 1.3.6.1.4.1.6296.101.2.11.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Upgrade mode status of slot.
| ||||
| CsleSlotStatusActionEvent | 1.3.6.1.4.1.6296.101.2.11.2.1.1.8 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current Event of slot. (accessible-for-notify)
| ||||
| CsleSlotStatusState | 1.3.6.1.4.1.6296.101.2.11.2.1.1.9 | INTEGER | AN | |
column · INTEGER · accessible-for-notify · current Status of slot. (accessible-for-notify)
| ||||
| CsleSlotStatusPower | 1.3.6.1.4.1.6296.101.2.11.2.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Currently power status of slot.
| ||||
| CsleSlotStatusSerialNumber | 1.3.6.1.4.1.6296.101.2.11.2.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The serial number | ||||
| CsleSlotStatusHealthState | 1.3.6.1.4.1.6296.101.2.11.2.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The slot health status
| ||||
| CsleslotStatusOverallState | 1.3.6.1.4.1.6296.101.2.11.2.1.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current The slot overrall status
| ||||
| CsleslotStatusSyncState | 1.3.6.1.4.1.6296.101.2.11.2.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current The slot sync status
| ||||
| NsleSlotStatusControl | 1.3.6.1.4.1.6296.101.2.11.2.2 | |||
| SsleSlotStatusControlRequest | 1.3.6.1.4.1.6296.101.2.11.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleSlotStatusControlStatus | 1.3.6.1.4.1.6296.101.2.11.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleSlotStatusControlTimer | 1.3.6.1.4.1.6296.101.2.11.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleSlotStatusControlTimeStamp | 1.3.6.1.4.1.6296.101.2.11.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleSlotStatusControlReqResult | 1.3.6.1.4.1.6296.101.2.11.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleSlotStatusControlSlotIndex | 1.3.6.1.4.1.6296.101.2.11.2.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The system slot index. 255 is means all slot. | ||||
| SsleSlotStatusControlPlanCardType | 1.3.6.1.4.1.6296.101.2.11.2.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Planning card type status of slot.
| ||||
| SsleSlotStatusControlUpgradeMode | 1.3.6.1.4.1.6296.101.2.11.2.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Upgrade mode status of slot.
| ||||
| NsleSlotStatusNotification | 1.3.6.1.4.1.6296.101.2.11.2.3 | |||
| !sleSlotStatusLocked | 1.3.6.1.4.1.6296.101.2.11.2.3.1 | |||
notification · current Description. | ||||
| !sleSlotStatusUnlocked | 1.3.6.1.4.1.6296.101.2.11.2.3.2 | |||
notification · current Description. | ||||
| !sleSlotStatusPlanning | 1.3.6.1.4.1.6296.101.2.11.2.3.3 | |||
notification · current Description. | ||||
| !sleSlotStatusNoPlanning | 1.3.6.1.4.1.6296.101.2.11.2.3.4 | |||
notification · current Description. | ||||
| !sleSlotStatusUpgradeModeChanged | 1.3.6.1.4.1.6296.101.2.11.2.3.5 | |||
notification · current Description. | ||||
| !sleSlotStatusPowerUp | 1.3.6.1.4.1.6296.101.2.11.2.3.6 | |||
notification · current Description. | ||||
| !sleSlotStatusPowerDown | 1.3.6.1.4.1.6296.101.2.11.2.3.7 | |||
notification · current Description. | ||||
| !sleSlotStatusPowerReset | 1.3.6.1.4.1.6296.101.2.11.2.3.8 | |||
notification · current Description. | ||||
| NsleSlotNosInfo | 1.3.6.1.4.1.6296.101.2.11.3 | |||
| TsleSlotNosInfoTable | 1.3.6.1.4.1.6296.101.2.11.3.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleSlotNosInfoEntry | 1.3.6.1.4.1.6296.101.2.11.3.1.1 | NA | ||
| CsleSlotNosVersion | 1.3.6.1.4.1.6296.101.2.11.3.1.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current NOS version of slot. | ||||
| CsleSlotNosRevision | 1.3.6.1.4.1.6296.101.2.11.3.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current NOS revision of slot. | ||||
| CsleSlotNosSize | 1.3.6.1.4.1.6296.101.2.11.3.1.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current NOS size of slot. | ||||
| CsleSlotNosUpgradeStatus | 1.3.6.1.4.1.6296.101.2.11.3.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current NOS upgrade status of slot.
| ||||
| CsleSlotNosStbVersion | 1.3.6.1.4.1.6296.101.2.11.3.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Stand by NOS version of slot | ||||
| CsleSlotNosStbRevision | 1.3.6.1.4.1.6296.101.2.11.3.1.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Stand by NOS revision of slot. | ||||
| CsleSlotNosStbSize | 1.3.6.1.4.1.6296.101.2.11.3.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Stand by NOS size of slot. | ||||
| NsleSlotNosControl | 1.3.6.1.4.1.6296.101.2.11.3.2 | |||
| SsleSlotNosControlRequest | 1.3.6.1.4.1.6296.101.2.11.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleSlotNosControlStatus | 1.3.6.1.4.1.6296.101.2.11.3.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleSlotNosControlTimer | 1.3.6.1.4.1.6296.101.2.11.3.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleSlotNosControlTimeStamp | 1.3.6.1.4.1.6296.101.2.11.3.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleSlotNosControlReqResult | 1.3.6.1.4.1.6296.101.2.11.3.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleSlotNosControlSlotIndex | 1.3.6.1.4.1.6296.101.2.11.3.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The system slot index. | ||||
| SsleSlotNosControlUpDownMethod | 1.3.6.1.4.1.6296.101.2.11.3.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current 1: using FTP 2: using TFTP
| ||||
| SsleSlotNosControlUpDownFlag | 1.3.6.1.4.1.6296.101.2.11.3.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current 1. Uploading slot nos to the remote-host. 2. Downloading slot nos from the remote-host.
| ||||
| SsleSlotNosControlServerAddress | 1.3.6.1.4.1.6296.101.2.11.3.2.9 | IpAddress | RW | |
scalar · IpAddress · read-write · current The remote-host's IP address. | ||||
| SsleSlotNosControlUserID | 1.3.6.1.4.1.6296.101.2.11.3.2.10 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Account-name. | ||||
| SsleSlotNosControlPassword | 1.3.6.1.4.1.6296.101.2.11.3.2.11 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Account-password. | ||||
| SsleSlotNosControlFileName | 1.3.6.1.4.1.6296.101.2.11.3.2.12 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current Slot nos file name. | ||||
| NsleSlotNosNotification | 1.3.6.1.4.1.6296.101.2.11.3.3 | |||
| !sleSlotNosUpgrade | 1.3.6.1.4.1.6296.101.2.11.3.3.1 | |||
notification · current Description. | ||||
| !sleSlotNosDownload | 1.3.6.1.4.1.6296.101.2.11.3.3.2 | |||
| !sleSlotNosBootloaderUpgrade | 1.3.6.1.4.1.6296.101.2.11.3.3.3 | |||
notification · current Description. | ||||
| NsleSlotReleasedIUNosInfo | 1.3.6.1.4.1.6296.101.2.11.4 | |||
| SsleSlotReleasedNIUNosVersion | 1.3.6.1.4.1.6296.101.2.11.4.1 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released NIU NOS image version on SFU. | ||||
| SsleSlotReleasedNIUNosRevision | 1.3.6.1.4.1.6296.101.2.11.4.2 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released NIU NOS image revision on SFU. | ||||
| SsleSlotReleasedNIUNosSize | 1.3.6.1.4.1.6296.101.2.11.4.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Released NIU NOS image size on SFU. | ||||
| SsleSlotReleasedGPIUNosVersion | 1.3.6.1.4.1.6296.101.2.11.4.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released GPIU NOS image version on SFU. | ||||
| SsleSlotReleasedGPIUNosRevision | 1.3.6.1.4.1.6296.101.2.11.4.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released GPIU NOS image revision on SFU. | ||||
| SsleSlotReleasedGPIUNosSize | 1.3.6.1.4.1.6296.101.2.11.4.6 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current Released GPIU NOS image size on SFU. | ||||
| SsleSlotReleasedSIUNosVersion | 1.3.6.1.4.1.6296.101.2.11.4.7 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released SIU NOS image version on SFU. | ||||
| SsleSlotReleasedSIUNosRevision | 1.3.6.1.4.1.6296.101.2.11.4.8 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released SIU NOS image revision on SFU. | ||||
| SsleSlotReleasedSIUNosSize | 1.3.6.1.4.1.6296.101.2.11.4.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current Released SIU NOS image size on SFU. | ||||
| SsleSlotReleasedIU10GE8NosVersion | 1.3.6.1.4.1.6296.101.2.11.4.10 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released IU_10GE8 NOS image version on SFU. | ||||
| SsleSlotReleasedIU10GE8NosRevision | 1.3.6.1.4.1.6296.101.2.11.4.11 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released IU_10GE8 NOS image revision on SFU. | ||||
| SsleSlotReleasedIU10GE8NosSize | 1.3.6.1.4.1.6296.101.2.11.4.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current Released IU_10GE8 NOS image size on SFU. | ||||
| SsleSlotReleasedIU10GEPON8NosVersion | 1.3.6.1.4.1.6296.101.2.11.4.13 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released IU_10GEPON8 NOS image version on SFU. | ||||
| SsleSlotReleasedIU10GEPON8NosRevision | 1.3.6.1.4.1.6296.101.2.11.4.14 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released IU_10GEPON8 NOS image revision on SFU. | ||||
| SsleSlotReleasedIU10GEPON8NosSize | 1.3.6.1.4.1.6296.101.2.11.4.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current Released IU_10GEPON8 NOS image size on SFU. | ||||
| SsleSlotReleasedIUGEPON8NosVersion | 1.3.6.1.4.1.6296.101.2.11.4.16 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released IU_GEPON8 NOS image version on SFU. | ||||
| SsleSlotReleasedIUGEPON8NosRevision | 1.3.6.1.4.1.6296.101.2.11.4.17 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Released IU_GEPON8 NOS image revision on SFU | ||||
| SsleSlotReleasedIUGEPON8NosSize | 1.3.6.1.4.1.6296.101.2.11.4.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current Released IU_GEPON8 NOS image size on SFU. | ||||
| NsleSlotPowerMon | 1.3.6.1.4.1.6296.101.2.11.5 | |||
| TsleSlotPowerMonTable | 1.3.6.1.4.1.6296.101.2.11.5.1 | NA | ||
table · not-accessible · current The Power-Monitoring table. | ||||
| RsleSlotPowerMonEntry | 1.3.6.1.4.1.6296.101.2.11.5.1.1 | NA | ||
row · not-accessible · current The Power-Monitoring entry. | ||||
| CsleSlotPowerMonIndex | 1.3.6.1.4.1.6296.101.2.11.5.1.1.1 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The physical index of power-monitoring object. | ||||
| CsleSlotPowerMonStatus | 1.3.6.1.4.1.6296.101.2.11.5.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The monitoring status of power-monitoring object.
| ||||
| CsleSlotPowerMonVoltage | 1.3.6.1.4.1.6296.101.2.11.5.1.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The voltage value of power-monitoring object. value 10000(1000v) indicate that FUSE.
| ||||
| NsleSlotAiu | 1.3.6.1.4.1.6296.101.2.11.6 | |||
| SsleSlotAiuRunStatus | 1.3.6.1.4.1.6296.101.2.11.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The slot AIU run status.
| ||||
| SsleSlotAiuAlarmStatus | 1.3.6.1.4.1.6296.101.2.11.6.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The slot AIU alarm status.
| ||||
| NsleSlotProtection | 1.3.6.1.4.1.6296.101.2.11.7 | |||
| NsleSlotProtectionBase | 1.3.6.1.4.1.6296.101.2.11.7.1 | |||
| NsleSlotProtectionInfo | 1.3.6.1.4.1.6296.101.2.11.7.1.1 | |||
| SsleSlotProtectionSystemStatus | 1.3.6.1.4.1.6296.101.2.11.7.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The system admin status(enable or disable) of overtemperature shutdown function.
| ||||
| SsleSlotProtectionSystemThreshold | 1.3.6.1.4.1.6296.101.2.11.7.1.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The system admin threshold of overtemperature shutdown function. | ||||
| SsleSlotProtectionIUPowerStatus | 1.3.6.1.4.1.6296.101.2.11.7.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The slot power shutdown status
| ||||
| NsleSlotProtectionControl | 1.3.6.1.4.1.6296.101.2.11.7.1.2 | |||
| SsleSlotProtectionControlRequest | 1.3.6.1.4.1.6296.101.2.11.7.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleSlotProtectionControlStatus | 1.3.6.1.4.1.6296.101.2.11.7.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleSlotProtectionControlTimer | 1.3.6.1.4.1.6296.101.2.11.7.1.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleSlotProtectionControlTimeStamp | 1.3.6.1.4.1.6296.101.2.11.7.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleSlotProtectionControlReqResult | 1.3.6.1.4.1.6296.101.2.11.7.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleSlotProtectionControlSystemStatus | 1.3.6.1.4.1.6296.101.2.11.7.1.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The system admin status(enable or disable) of overtemperature shutdown function.
| ||||
| SsleSlotProtectionControlSystemThreshold | 1.3.6.1.4.1.6296.101.2.11.7.1.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The system admin threshold of overtemperature shutdown function. | ||||
| SsleSlotProtectionControlIUPowerStatus | 1.3.6.1.4.1.6296.101.2.11.7.1.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The slot power shutdown status
| ||||
| NsleSlotProtectionNotification | 1.3.6.1.4.1.6296.101.2.11.7.1.3 | |||
| !sleSlotProtectionSystemStatusChanged | 1.3.6.1.4.1.6296.101.2.11.7.1.3.1 | |||
notification · current Description. | ||||
| !sleSlotProtectionSystemThreshChanged | 1.3.6.1.4.1.6296.101.2.11.7.1.3.2 | |||
notification · current Description. | ||||
| !sleSlotProtectionIUPowerStatusChanged | 1.3.6.1.4.1.6296.101.2.11.7.1.3.3 | |||
notification · current Description. | ||||
| NsleSlotProtectionIU | 1.3.6.1.4.1.6296.101.2.11.7.2 | |||
| TsleSlotProtectionIUTable | 1.3.6.1.4.1.6296.101.2.11.7.2.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleSlotProtectionIUEntry | 1.3.6.1.4.1.6296.101.2.11.7.2.1.1 | NA | ||
| CsleSlotProtectionIUTemperHighThresh | 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The Slot temperature High-threshold of overtemperature alarm | ||||
| CsleSlotProtectionIUTemperLowThresh | 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.2 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The Slot temperature Low-threshold of overtemperature alarm | ||||
| CsleSlotProtectionIUPowerThresh | 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.3 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The Slot temperature threshold of overtemperature power shutdown. | ||||
| CsleSlotProtectionIUTemper | 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.4 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The Slot temperature. | ||||
| CsleSlotProtectionIUTemper2 | 1.3.6.1.4.1.6296.101.2.11.7.2.1.1.5 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The Slot temperature2. | ||||
| NsleSlotProtectionIUControl | 1.3.6.1.4.1.6296.101.2.11.7.2.2 | |||
| SsleSlotProtectionIUControlRequest | 1.3.6.1.4.1.6296.101.2.11.7.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleSlotProtectionIUControlStatus | 1.3.6.1.4.1.6296.101.2.11.7.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleSlotProtectionIUControlTimer | 1.3.6.1.4.1.6296.101.2.11.7.2.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command | ||||
| SsleSlotProtectionIUControlTimeStamp | 1.3.6.1.4.1.6296.101.2.11.7.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleSlotProtectionIUControlReqResult | 1.3.6.1.4.1.6296.101.2.11.7.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleSlotProtectionIUControlindex | 1.3.6.1.4.1.6296.101.2.11.7.2.2.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current the slot index | ||||
| SsleSlotProtectionIUControlTemperHighThresh | 1.3.6.1.4.1.6296.101.2.11.7.2.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Slot temperature High-threshold of overtemperature alarm | ||||
| SsleSlotProtectionIUControlTemperLowThresh | 1.3.6.1.4.1.6296.101.2.11.7.2.2.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Slot temperature Low-threshold of overtemperature alarm | ||||
| SsleSlotProtectionIUControlPowerThresh | 1.3.6.1.4.1.6296.101.2.11.7.2.2.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current The Slot temperature threshold of overtemperature power shutdown. | ||||
| NsleSlotProtectionIUNotification | 1.3.6.1.4.1.6296.101.2.11.7.2.3 | |||
| !sleSlotProtectionIUTemperThreshChanged | 1.3.6.1.4.1.6296.101.2.11.7.2.3.1 | |||
| !sleSlotProtectionIUPowerThreshChanged | 1.3.6.1.4.1.6296.101.2.11.7.2.3.2 | |||
notification · current Description. | ||||
| NsleRF | 1.3.6.1.4.1.6296.101.2.12 | |||
| NsleRfBaseInfo | 1.3.6.1.4.1.6296.101.2.12.1 | |||
| SsleRfConnectStatus | 1.3.6.1.4.1.6296.101.2.12.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The RF connect status.
| ||||
| SsleRfPowerStatus | 1.3.6.1.4.1.6296.101.2.12.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The RF power status.
| ||||
| SsleRfEthertype | 1.3.6.1.4.1.6296.101.2.12.1.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The RF ethertype. | ||||
| SsleRfSrcAddress | 1.3.6.1.4.1.6296.101.2.12.1.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The RF source address. | ||||
| SsleRfDesAddress | 1.3.6.1.4.1.6296.101.2.12.1.5 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current The RF destination address. | ||||
| NsleRfBaseControl | 1.3.6.1.4.1.6296.101.2.12.2 | |||
| SsleRfBaseControlRequest | 1.3.6.1.4.1.6296.101.2.12.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleRfBaseControlStatus | 1.3.6.1.4.1.6296.101.2.12.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleRfBaseControlTimer | 1.3.6.1.4.1.6296.101.2.12.2.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleRfBaseControlTimeStamp | 1.3.6.1.4.1.6296.101.2.12.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleRfBaseControlReqResult | 1.3.6.1.4.1.6296.101.2.12.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of user command. | ||||
| SsleRfBaseControlRfEthertype | 1.3.6.1.4.1.6296.101.2.12.2.6 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The Rf ethertype ,the format is 0xXXXX, default value is 0x8864. | ||||
| NsleRfBaseNotification | 1.3.6.1.4.1.6296.101.2.12.3 | |||
| !sleRFBaseEthertypeChanged | 1.3.6.1.4.1.6296.101.2.12.3.1 | |||
notification · current Description. | ||||
| !sleRFBaseEthertypeResetChanged | 1.3.6.1.4.1.6296.101.2.12.3.2 | |||
notification · current Description. | ||||
| TsleRfPortTable | 1.3.6.1.4.1.6296.101.2.12.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleRfPortEntry | 1.3.6.1.4.1.6296.101.2.12.4.1 | NA | ||
| CsleRfPortIndex | 1.3.6.1.4.1.6296.101.2.12.4.1.1 | INTEGER (1..256) | RW | |
column · INTEGER (1..256) · read-write · current The RF port index. | ||||
| CsleRfPortAdminStatus | 1.3.6.1.4.1.6296.101.2.12.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The RF port adminStatus.
| ||||
| CsleRfPortOperStatus | 1.3.6.1.4.1.6296.101.2.12.4.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The RF port operStatus.
| ||||
| NsleRFPortControl | 1.3.6.1.4.1.6296.101.2.12.5 | |||
| SsleRfPortControlRequest | 1.3.6.1.4.1.6296.101.2.12.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleRfPortControlStatus | 1.3.6.1.4.1.6296.101.2.12.5.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleRfPortControlTimer | 1.3.6.1.4.1.6296.101.2.12.5.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleRfPortControlTimeStamp | 1.3.6.1.4.1.6296.101.2.12.5.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleRfPortControlReqResult | 1.3.6.1.4.1.6296.101.2.12.5.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of user command. | ||||
| SsleRfPortControlIndex | 1.3.6.1.4.1.6296.101.2.12.5.6 | Integer32 (1..8) | RW | |
scalar · Integer32 (1..8) · read-write · current The RF port index <1-8>. | ||||
| SsleRfPortControlAdminStatus | 1.3.6.1.4.1.6296.101.2.12.5.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The RF port adminStatus.
| ||||
| NsleRFPortNotification | 1.3.6.1.4.1.6296.101.2.12.6 | |||
| !sleRfPortStatusChanged | 1.3.6.1.4.1.6296.101.2.12.6.1 | |||
notification · current Description. | ||||
| NsleEnvironmentMonitor | 1.3.6.1.4.1.6296.101.2.13 | |||
| TsleEMTable | 1.3.6.1.4.1.6296.101.2.13.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleEMEntry | 1.3.6.1.4.1.6296.101.2.13.1.1 | NA | ||
| CsleEMInputIndex | 1.3.6.1.4.1.6296.101.2.13.1.1.1 | Integer32 (1..4) | RO | |
column · Integer32 (1..4) · read-only · current The environment monitoring input index(1-4). | ||||
| CsleEMAlarmString | 1.3.6.1.4.1.6296.101.2.13.1.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The alarm string | ||||
| CsleEMAlarmSeverity | 1.3.6.1.4.1.6296.101.2.13.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The alarm severity.
| ||||
| CsleEMmode | 1.3.6.1.4.1.6296.101.2.13.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The environment monitoring mode.(default:normal-close)
| ||||
| NsleEMControl | 1.3.6.1.4.1.6296.101.2.13.2 | |||
| SsleEMControlRequest | 1.3.6.1.4.1.6296.101.2.13.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleEMControlStatus | 1.3.6.1.4.1.6296.101.2.13.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current Description. | ||||
| SsleEMControlTimer | 1.3.6.1.4.1.6296.101.2.13.2.3 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The maximum time for the manager for a long running user command. Apply your setting. | ||||
| SsleEMControlTimeStamp | 1.3.6.1.4.1.6296.101.2.13.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current Description. | ||||
| SsleEMControlReqResult | 1.3.6.1.4.1.6296.101.2.13.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current Description. | ||||
| SsleEMControlInputIndex | 1.3.6.1.4.1.6296.101.2.13.2.6 | Integer32 (1..4) | RW | |
scalar · Integer32 (1..4) · read-write · current The environment monitoring input index(1-4). | ||||
| SsleEMControlAlarmString | 1.3.6.1.4.1.6296.101.2.13.2.7 | OCTET STRING | RW | |
scalar · OCTET STRING · read-write · current The alarm string | ||||
| SsleEMControlAlarmSeverity | 1.3.6.1.4.1.6296.101.2.13.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The alarm severity.
| ||||
| SsleEMControlmode | 1.3.6.1.4.1.6296.101.2.13.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current The environment monitoring mode.(default:normal-close)
| ||||
| NsleEMNotification | 1.3.6.1.4.1.6296.101.2.13.3 | |||
| !sleEMChanged | 1.3.6.1.4.1.6296.101.2.13.3.1 | |||
notification · current Description. | ||||
| !sleEMDeleted | 1.3.6.1.4.1.6296.101.2.13.3.2 | |||
notification · current Description. | ||||
| NsleBypass | 1.3.6.1.4.1.6296.101.2.14 | |||
| NsleBypassBase | 1.3.6.1.4.1.6296.101.2.14.1 | |||
| NsleBypassBaseInfo | 1.3.6.1.4.1.6296.101.2.14.1.1 | |||
| SsleBypassMode | 1.3.6.1.4.1.6296.101.2.14.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current optic bypass mode
| ||||
| SsleBypassStatus | 1.3.6.1.4.1.6296.101.2.14.1.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current optic bypass status
| ||||
| NsleBypassBaseControl | 1.3.6.1.4.1.6296.101.2.14.1.2 | |||
| SsleBypassBaseControlRequest | 1.3.6.1.4.1.6296.101.2.14.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Description.
| ||||
| SsleBypassBaseControlStatus | 1.3.6.1.4.1.6296.101.2.14.1.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleBypassBaseControlTimer | 1.3.6.1.4.1.6296.101.2.14.1.2.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleBypassBaseControlTimeStamp | 1.3.6.1.4.1.6296.101.2.14.1.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleBypassBaseControlReqResult | 1.3.6.1.4.1.6296.101.2.14.1.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of user command. | ||||
| SsleBypassBaseControlMode | 1.3.6.1.4.1.6296.101.2.14.1.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current optic bypass mode
| ||||
| NsleBypassBaseNotification | 1.3.6.1.4.1.6296.101.2.14.1.3 | |||
| !sleBypassModeChanged | 1.3.6.1.4.1.6296.101.2.14.1.3.1 | |||
notification · current setBypassMode(1) | ||||
| NsleBypassOption | 1.3.6.1.4.1.6296.101.2.14.2 | |||
| TsleBypassOptionConnectivityTable | 1.3.6.1.4.1.6296.101.2.14.2.1 | NA | ||
table · not-accessible · current The connectivity option of bypass | ||||
| RsleBypassOptionConnectivityEntry | 1.3.6.1.4.1.6296.101.2.14.2.1.1 | NA | ||
row · not-accessible · current Description. | ||||
| CsleBypassOptionConnectivityAddress | 1.3.6.1.4.1.6296.101.2.14.2.1.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The target IP address of bypass health-checking | ||||
| CsleBypassOptionConnectivityPort | 1.3.6.1.4.1.6296.101.2.14.2.1.1.2 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The target port of bypass health-checking. | ||||
| NsleBypassOptionConnectivityControl | 1.3.6.1.4.1.6296.101.2.14.2.2 | |||
| SsleBypassOptionConnectivityControlRequest | 1.3.6.1.4.1.6296.101.2.14.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current setBypassConnectivity(1) : bypass-check-option connectivity (A.B.C.D) PORT unsetBypassConnectivity(2) : no bypass-check option connectivity
| ||||
| SsleBypassOptionConnectivityControlStatus | 1.3.6.1.4.1.6296.101.2.14.2.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleBypassOptionConnectivityControlTimer | 1.3.6.1.4.1.6296.101.2.14.2.2.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleBypassOptionConnectivityControlTimeStamp | 1.3.6.1.4.1.6296.101.2.14.2.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleBypassOptionConnectivityControlReqResult | 1.3.6.1.4.1.6296.101.2.14.2.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of user command. | ||||
| SsleBypassOptionConnectivityControlAddress | 1.3.6.1.4.1.6296.101.2.14.2.2.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current The target IP address of bypass health-checking | ||||
| SsleBypassOptionConnectivityControlPort | 1.3.6.1.4.1.6296.101.2.14.2.2.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current he target port of bypass health-checking | ||||
| NsleBypassOptionConnectivityNotification | 1.3.6.1.4.1.6296.101.2.14.2.3 | |||
| !sleBypassOptionConnectivitySet | 1.3.6.1.4.1.6296.101.2.14.2.3.1 | |||
| !sleBypassOptionConnectivityUnset | 1.3.6.1.4.1.6296.101.2.14.2.3.2 | |||
| TsleBypassOptionPingTable | 1.3.6.1.4.1.6296.101.2.14.2.4 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBypassOptionPingEntry | 1.3.6.1.4.1.6296.101.2.14.2.4.1 | NA | ||
| CsleBypassOptionPingAddress | 1.3.6.1.4.1.6296.101.2.14.2.4.1.1 | IpAddress | RO | |
column · IpAddress · read-only · current The target IP address of bypass ping health checking | ||||
| CsleBypassOptionPingTransInterval | 1.3.6.1.4.1.6296.101.2.14.2.4.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The ping transaction interval | ||||
| CsleBypassOptionPingTranNumber | 1.3.6.1.4.1.6296.101.2.14.2.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The ping transaction request number | ||||
| CsleBypassOptionPingReqInterval | 1.3.6.1.4.1.6296.101.2.14.2.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The ping request interval | ||||
| CsleBypassOptionPingReqTimeout | 1.3.6.1.4.1.6296.101.2.14.2.4.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The ping request timeout | ||||
| CsleBypassOptionPingLossThresh | 1.3.6.1.4.1.6296.101.2.14.2.4.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The ping loss threshold | ||||
| NsleBypassOptionPingControl | 1.3.6.1.4.1.6296.101.2.14.2.5 | |||
| SsleBypassOptionPingControlRequest | 1.3.6.1.4.1.6296.101.2.14.2.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleBypassOptionPingControlStatus | 1.3.6.1.4.1.6296.101.2.14.2.5.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleBypassOptionPingControlTimer | 1.3.6.1.4.1.6296.101.2.14.2.5.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleBypassOptionPingControlTimeStamp | 1.3.6.1.4.1.6296.101.2.14.2.5.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleBypassOptionPingControlReqResult | 1.3.6.1.4.1.6296.101.2.14.2.5.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of user command. | ||||
| SsleBypassOptionPingControlAddress | 1.3.6.1.4.1.6296.101.2.14.2.5.6 | IpAddress | RW | |
scalar · IpAddress · read-write · current The target IP address of bypass ping health-checking | ||||
| SsleBypassOptionPingControlTransInterval | 1.3.6.1.4.1.6296.101.2.14.2.5.7 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ping transaction interval | ||||
| SsleBypassOptionPingControlTranNumber | 1.3.6.1.4.1.6296.101.2.14.2.5.8 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ping transaction request number | ||||
| SsleBypassOptionPingControlReqInterval | 1.3.6.1.4.1.6296.101.2.14.2.5.9 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ping request interval | ||||
| SsleBypassOptionPingControlReqTimeout | 1.3.6.1.4.1.6296.101.2.14.2.5.10 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ping request timeout | ||||
| SsleBypassOptionPingControlLossThresh | 1.3.6.1.4.1.6296.101.2.14.2.5.11 | Integer32 | RW | |
scalar · Integer32 · read-write · current The ping loss threshold | ||||
| NsleBypassOptionPingNotification | 1.3.6.1.4.1.6296.101.2.14.2.6 | |||
| !sleBypassOptionPingSet | 1.3.6.1.4.1.6296.101.2.14.2.6.1 | |||
notification · current Description.
| ||||
| !sleBypassOptionPingUnset | 1.3.6.1.4.1.6296.101.2.14.2.6.2 | |||
notification · current Description. | ||||
| TsleBypassOptionLinkMonitorTable | 1.3.6.1.4.1.6296.101.2.14.2.7 | NA | ||
table · not-accessible · current Description. | ||||
| RsleBypassOptionLinkMonitorEntry | 1.3.6.1.4.1.6296.101.2.14.2.7.1 | NA | ||
| CsleBypassOptionLinkMonitorPort | 1.3.6.1.4.1.6296.101.2.14.2.7.1.1 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The port of bypass link health-checking | ||||
| CsleBypassOptionLinkMonitorPortStatus | 1.3.6.1.4.1.6296.101.2.14.2.7.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The port status of bypass link health-checking
| ||||
| NsleBypassOptionLinkMonitorControl | 1.3.6.1.4.1.6296.101.2.14.2.8 | |||
| SsleBypassOptionLinkMonitorControlRequest | 1.3.6.1.4.1.6296.101.2.14.2.8.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command.
| ||||
| SsleBypassOptionLinkMonitorControlStatus | 1.3.6.1.4.1.6296.101.2.14.2.8.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command. | ||||
| SsleBypassOptionLinkMonitorControlTimer | 1.3.6.1.4.1.6296.101.2.14.2.8.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleBypassOptionLinkMonitorControlTimeStamp | 1.3.6.1.4.1.6296.101.2.14.2.8.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command). | ||||
| SsleBypassOptionLinkMonitorControlReqResult | 1.3.6.1.4.1.6296.101.2.14.2.8.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of user command. | ||||
| SsleBypassOptionLinkMonitorControlPort | 1.3.6.1.4.1.6296.101.2.14.2.8.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The port of bypass link health-checking | ||||
| SsleBypassOptionLinkMonitorControlPortStatus | 1.3.6.1.4.1.6296.101.2.14.2.8.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The port status of bypass link health-checking
| ||||
| NsleBypassOptioLinkMonitorNotification | 1.3.6.1.4.1.6296.101.2.14.2.9 | |||
| !sleBypassOptionLinkMonitorChanged | 1.3.6.1.4.1.6296.101.2.14.2.9.1 | |||
| NsleHFC | 1.3.6.1.4.1.6296.101.2.15 | |||
| TsleHFCTable | 1.3.6.1.4.1.6296.101.2.15.1 | NA | ||
table · not-accessible · current Description. | ||||
| RsleHFCEntry | 1.3.6.1.4.1.6296.101.2.15.1.1 | NA | ||
| CsleHFCOptic1550OTX | 1.3.6.1.4.1.6296.101.2.15.1.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC Optic 1550 OTX value. | ||||
| CsleHFCOptic1550OTXAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current HFC Optic 1550 OTX alarm status.
| ||||
| CsleHFCOpticUpstreamOTX | 1.3.6.1.4.1.6296.101.2.15.1.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC Optic Upstream OTX value. | ||||
| CsleHFCOpticUpstreamOTXAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current HFC Optic Upstream OTX alarm status.
| ||||
| CsleHFCOpticDownstreamORX | 1.3.6.1.4.1.6296.101.2.15.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC Optic Downstream ORX value. | ||||
| CsleHFCOpticDownstreamORXAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current HFC Optic Downstream ORX alarm status.
| ||||
| CsleHFCEDFA1OTX | 1.3.6.1.4.1.6296.101.2.15.1.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 OTX value. | ||||
| CsleHFCEDFA1OTXAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 OTX alarm status.
| ||||
| CsleHFCEDFA1ORX | 1.3.6.1.4.1.6296.101.2.15.1.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 ORX value. | ||||
| CsleHFCEDFA1ORXAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 ORX alarm status.
| ||||
| CsleHFCEDFA1LD1Current | 1.3.6.1.4.1.6296.101.2.15.1.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 LD1 Current value. | ||||
| CsleHFCEDFA1LD1CurrentAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 LD1 Current alarm status.
| ||||
| CsleHFCEDFA1LD2Current | 1.3.6.1.4.1.6296.101.2.15.1.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 LD2 Current value. | ||||
| CsleHFCEDFA1LD2CurrentAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 LD2 Current alarm status.
| ||||
| CsleHFCEDFA1LD1Temp | 1.3.6.1.4.1.6296.101.2.15.1.1.15 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 LD1 Temp value. | ||||
| CsleHFCEDFA1LD1TempAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 LD1 Temp alarm status.
| ||||
| CsleHFCEDFA1LD2Temp | 1.3.6.1.4.1.6296.101.2.15.1.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 LD2 Temp value. | ||||
| CsleHFCEDFA1LD2TempAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 LD2 Temp alarm status.
| ||||
| CsleHFCEDFA1CaseTemp | 1.3.6.1.4.1.6296.101.2.15.1.1.19 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA1 Case Temp value. | ||||
| CsleHFCEDFA1CaseTempAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA1 Case Temp alarm status.
| ||||
| CsleHFCEDFA2OTX | 1.3.6.1.4.1.6296.101.2.15.1.1.21 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 OTX value. | ||||
| CsleHFCEDFA2OTXAarm | 1.3.6.1.4.1.6296.101.2.15.1.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 OTX alarm status.
| ||||
| CsleHFCEDFA2ORX | 1.3.6.1.4.1.6296.101.2.15.1.1.23 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 ORX value. | ||||
| CsleHFCEDFA2ORXAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 ORX alarm status.
| ||||
| CsleHFCEDFA2LD1Current | 1.3.6.1.4.1.6296.101.2.15.1.1.25 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 LD1 Current value. | ||||
| CsleHFCEDFA2LD1CurrentAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.26 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 LD1 Current alarm status.
| ||||
| CsleHFCEDFA2LD2Current | 1.3.6.1.4.1.6296.101.2.15.1.1.27 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 LD2 Current value. | ||||
| CsleHFCEDFA2LD2CurrentAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 LD2 Current alarm status.
| ||||
| CsleHFCEDFA2LD1Temp | 1.3.6.1.4.1.6296.101.2.15.1.1.29 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 LD1 Temp value. | ||||
| CsleHFCEDFA2LD1TempAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 LD1 Temp alarm status.
| ||||
| CsleHFCEDFA2LD2Temp | 1.3.6.1.4.1.6296.101.2.15.1.1.31 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 LD2 Temp value. | ||||
| CsleHFCEDFA2LD2TempAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 LD2 Temp alarm status.
| ||||
| CsleHFCEDFA2CaseTemp | 1.3.6.1.4.1.6296.101.2.15.1.1.33 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current HFC EDFA2 Case Temp value. | ||||
| CsleHFCEDFA2CaseTempAlarm | 1.3.6.1.4.1.6296.101.2.15.1.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current HFC EDFA2 Case Temp alarm status.
| ||||
| NsleHFCControl | 1.3.6.1.4.1.6296.101.2.15.2 | |||
| SsleHFCControlRequest | 1.3.6.1.4.1.6296.101.2.15.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The request of a user command
| ||||
| SsleHFCControlStatus | 1.3.6.1.4.1.6296.101.2.15.2.2 | SleControlStatusType | RO | |
scalar · SleControlStatusType · read-only · current The status of user command | ||||
| SsleHFCControlTimer | 1.3.6.1.4.1.6296.101.2.15.2.3 | Gauge32 | RW | |
scalar · Gauge32 · read-write · current The maximum time for the manager for a long running user command. | ||||
| SsleHFCControlTimeStamp | 1.3.6.1.4.1.6296.101.2.15.2.4 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The time stamp of the last command(end of command) | ||||
| SsleHFCControlReqResult | 1.3.6.1.4.1.6296.101.2.15.2.5 | SleControlRequestResultType | RO | |
scalar · SleControlRequestResultType · read-only · current The result of the last user command | ||||
| SsleHFCControlAlarmIndex | 1.3.6.1.4.1.6296.101.2.15.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The HFC alarm index , edfa1 /edfa2 /optic .
| ||||
| SsleHFCControlAlarmStatus | 1.3.6.1.4.1.6296.101.2.15.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The HFC alrm status.
| ||||
| NsleHFCNotification | 1.3.6.1.4.1.6296.101.2.15.3 | |||
| !sleHFCOpticAlarmStatusChanged | 1.3.6.1.4.1.6296.101.2.15.3.1 | |||
notification · current HFC Alarm Status Changed. | ||||
| GsleDeviceGroup | 1.3.6.1.4.1.6296.101.2.16 | |||
group · current Description.
| ||||
| GsleDeviceNotificationGroup | 1.3.6.1.4.1.6296.101.2.17 | |||
group · current Description.
| ||||
Traps / Notifications
- sleBatteryBackupProfileChanged
1.3.6.1.4.1.6296.101.2.7.6.1 - sleBatteryBackupTableCleared
1.3.6.1.4.1.6296.101.2.7.6.3 - sleBatteryBackupUpgraded
1.3.6.1.4.1.6296.101.2.7.6.2 - sleBatteryChargingStartChanged
1.3.6.1.4.1.6296.101.2.7.3.2 - sleBatteryForceChargeChanged
1.3.6.1.4.1.6296.101.2.7.3.1 - sleBatteryForceChargeNonStopChanged
1.3.6.1.4.1.6296.101.2.7.3.3 - sleBatteryPsuAcTemperThreshChanged
1.3.6.1.4.1.6296.101.2.7.3.7 - sleBatteryRBUBTStatusChanged
1.3.6.1.4.1.6296.101.2.7.3.4 - sleBatteryRBUBTThresholdChanged
1.3.6.1.4.1.6296.101.2.7.3.5 - sleBatteryRBURechargeVoltageChanged
1.3.6.1.4.1.6296.101.2.7.3.6 - sleBatteryRBUTemperThreshChanged
1.3.6.1.4.1.6296.101.2.7.3.8 - sleBypassModeChanged
1.3.6.1.4.1.6296.101.2.14.1.3.1 - sleBypassOptionConnectivitySet
1.3.6.1.4.1.6296.101.2.14.2.3.1 - sleBypassOptionConnectivityUnset
1.3.6.1.4.1.6296.101.2.14.2.3.2 - sleBypassOptionLinkMonitorChanged
1.3.6.1.4.1.6296.101.2.14.2.9.1 - sleBypassOptionPingSet
1.3.6.1.4.1.6296.101.2.14.2.6.1 - sleBypassOptionPingUnset
1.3.6.1.4.1.6296.101.2.14.2.6.2 - sleDeviceEnvironmentMonitoringStatusChanged
1.3.6.1.4.1.6296.101.2.1.3.4 - sleDeviceJumboFrameChanged
1.3.6.1.4.1.6296.101.2.1.3.2 - sleDeviceLEDTestChanged
1.3.6.1.4.1.6296.101.2.1.3.3 - sleDeviceTemperatureThresholdChanged
1.3.6.1.4.1.6296.101.2.1.3.1 - sleEMChanged
1.3.6.1.4.1.6296.101.2.13.3.1 - sleEMDeleted
1.3.6.1.4.1.6296.101.2.13.3.2 - sleEthernetPortChanged
1.3.6.1.4.1.6296.101.2.2.3.1 - sleEthernetPortCpuStatisticsLimitChanged
1.3.6.1.4.1.6296.101.2.2.3.3 - sleEthernetPortFloodBlockStateChanged
1.3.6.1.4.1.6296.101.2.2.3.4 - sleEthernetPortLinkChanged
1.3.6.1.4.1.6296.101.2.2.3.2 - sleEthernetSFPDdmState
1.3.6.1.4.1.6296.101.2.2.7.2 - sleEthernetSFPRemoteReset
1.3.6.1.4.1.6296.101.2.2.7.1 - sleEthernetSFPThresholdDestroyed
1.3.6.1.4.1.6296.101.2.2.10.3 - sleEthernetSFPThresholdSfpChanged
1.3.6.1.4.1.6296.101.2.2.10.1 - sleEthernetSFPThresholdSystemChanged
1.3.6.1.4.1.6296.101.2.2.10.2 - sleFanAdminStateChanged
1.3.6.1.4.1.6296.101.2.4.3.1 - sleFanSpeedThresholdChanged
1.3.6.1.4.1.6296.101.2.4.3.2 - sleHFCOpticAlarmStatusChanged
1.3.6.1.4.1.6296.101.2.15.3.1 - sleRFBaseEthertypeChanged
1.3.6.1.4.1.6296.101.2.12.3.1 - sleRFBaseEthertypeResetChanged
1.3.6.1.4.1.6296.101.2.12.3.2 - sleRfPortStatusChanged
1.3.6.1.4.1.6296.101.2.12.6.1 - sleSlotNosBootloaderUpgrade
1.3.6.1.4.1.6296.101.2.11.3.3.3 - sleSlotNosDownload
1.3.6.1.4.1.6296.101.2.11.3.3.2 - sleSlotNosUpgrade
1.3.6.1.4.1.6296.101.2.11.3.3.1 - sleSlotProtectionIUPowerStatusChanged
1.3.6.1.4.1.6296.101.2.11.7.1.3.3 - sleSlotProtectionIUPowerThreshChanged
1.3.6.1.4.1.6296.101.2.11.7.2.3.2 - sleSlotProtectionIUTemperThreshChanged
1.3.6.1.4.1.6296.101.2.11.7.2.3.1 - sleSlotProtectionSystemStatusChanged
1.3.6.1.4.1.6296.101.2.11.7.1.3.1 - sleSlotProtectionSystemThreshChanged
1.3.6.1.4.1.6296.101.2.11.7.1.3.2 - sleSlotStatusLocked
1.3.6.1.4.1.6296.101.2.11.2.3.1 - sleSlotStatusNoPlanning
1.3.6.1.4.1.6296.101.2.11.2.3.4 - sleSlotStatusPlanning
1.3.6.1.4.1.6296.101.2.11.2.3.3 - sleSlotStatusPowerDown
1.3.6.1.4.1.6296.101.2.11.2.3.7 - sleSlotStatusPowerReset
1.3.6.1.4.1.6296.101.2.11.2.3.8 - sleSlotStatusPowerUp
1.3.6.1.4.1.6296.101.2.11.2.3.6 - sleSlotStatusUnlocked
1.3.6.1.4.1.6296.101.2.11.2.3.2 - sleSlotStatusUpgradeModeChanged
1.3.6.1.4.1.6296.101.2.11.2.3.5 - sleSlotSystemCPULoadChagned
1.3.6.1.4.1.6296.101.2.11.1.3.2 - sleSlotSystemCPULoadDeleted
1.3.6.1.4.1.6296.101.2.11.1.3.3 - sleSlotSystemRestart
1.3.6.1.4.1.6296.101.2.11.1.3.1 - sleTemperatureThresholdChanged
1.3.6.1.4.1.6296.101.2.6.3.1