DASAN-SHDSL-MIB
DASAN Co.,LTD.The MIB module to describe G.SHDSL product. The MIB module that provides objects that are proprietary and extension to SHDSL- LINE-MIB. The MIB include extension to following Tables. The MIB also include a set of scalar(s) clubbed under the group 'dsShdslCapabilityGroup'.
snmptranslate -m DASAN-SHDSL-MIB -Tpsnmpwalk -v2c -c <community> -m DASAN-SHDSL-MIB <host> 1.3.6.1.4.1.6296.9.6Imports
| DASAN-SMI | dasanMgmt |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdasanShdslMIB | 1.3.6.1.4.1.6296.9.6 | |||
identity The MIB module to describe G.SHDSL product. The MIB module that provides objects that are proprietary and extension to SHDSL- LINE-MIB. The MIB include extension to following Tables. The MIB also include a set of scalar(s) clubbed under the group 'dsShdslCapabilityGroup'. | ||||
| NdasanShdslLineMIB | 1.3.6.1.4.1.6296.9.6.1 | |||
| NdasanShdslMIBObjects | 1.3.6.1.4.1.6296.9.6.1.1 | |||
| NdsShdslCapabilityGroup | 1.3.6.1.4.1.6296.9.6.1.1.1 | |||
| SdsShdslCapabilityLineTxCap | 1.3.6.1.4.1.6296.9.6.1.1.1.1 | Bits | RO | |
scalar · Bits · read-only · current This bitmap specifies the transmission modes that the STU-C is capable of supporting. Right now, support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MxU.
| ||||
| TdsShdslLineStatusTable | 1.3.6.1.4.1.6296.9.6.1.1.2 | NA | ||
table · not-accessible · current This MO is proprietary extension of RFC 3276 MIB and contains the proprietary line status. | ||||
| RdsShdslLineStatusEntry | 1.3.6.1.4.1.6296.9.6.1.1.2.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsShdslLineStatusTable. The Table is indexed by ifIndex.
| ||||
| CdsShdslOpState | 1.3.6.1.4.1.6296.9.6.1.1.2.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the high level operational state for the STU.
| ||||
| CdsShdslStartProgress | 1.3.6.1.4.1.6296.9.6.1.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the current detailed operational state of the STU.
| ||||
| CdsShdslFwRelease | 1.3.6.1.4.1.6296.9.6.1.1.2.1.3 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current Transceiver firmware release number. | ||||
| CdsShdslLineSwap | 1.3.6.1.4.1.6296.9.6.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates if the physical lines are swapped, i.e., logical channel A is connected to physical channel B. This applies to 4-wire operation only.
| ||||
| CdsShdslRmtCountryCode | 1.3.6.1.4.1.6296.9.6.1.1.2.1.5 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current This object provides the country code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. GlobespanVirata sets this to USA. | ||||
| CdsShdslRmtEncoderA | 1.3.6.1.4.1.6296.9.6.1.1.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the 21-bit value corresponding to encoder coefficient A, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | ||||
| CdsShdslRmtEncoderB | 1.3.6.1.4.1.6296.9.6.1.1.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the 21-bit value corresponding to encoder coefficient B, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | ||||
| CdsShdslRmtProviderCode | 1.3.6.1.4.1.6296.9.6.1.1.2.1.8 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current This object identifies the provider code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | ||||
| CdsShdslLocDetect | 1.3.6.1.4.1.6296.9.6.1.1.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current This object is used to determine if carrier has been lost. | ||||
| CdsShdslTxPower | 1.3.6.1.4.1.6296.9.6.1.1.2.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the local STU transmit power in tenths of a dBm. | ||||
| CdsShdslFramerSync | 1.3.6.1.4.1.6296.9.6.1.1.2.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object returns information regarding the framer synchronization status.
| ||||
| CdsShdslRmtTomData | 1.3.6.1.4.1.6296.9.6.1.1.2.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides vendor-provided data, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | ||||
| CdsShdslDriftAlarm | 1.3.6.1.4.1.6296.9.6.1.1.2.1.13 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies if the receive clock is in or out of range. | ||||
| CdsShdslReceiverGain | 1.3.6.1.4.1.6296.9.6.1.1.2.1.14 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides the total receiver gain in dB. | ||||
| CdsShdslBertError | 1.3.6.1.4.1.6296.9.6.1.1.2.1.15 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides the count of bit errors since the last time the object was read, as well as the type of synchronization.
| ||||
| CdsShdslFramerOHAndDefects | 1.3.6.1.4.1.6296.9.6.1.1.2.1.16 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current This object returns overhead data. The four least significant bits contain the overhead data in the following format: bit 0 is losd, bit 1 is sega, bit 2 is ps, and bit 3 is segd. | ||||
| CdsShdslRmtFwVersion | 1.3.6.1.4.1.6296.9.6.1.1.2.1.17 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides the transceiver firmware release number of the STU at the other end of the loop. | ||||
| CdsShdslUtopiaCellDelineation | 1.3.6.1.4.1.6296.9.6.1.1.2.1.18 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether cell delineation has been found.
| ||||
| CdsShdslUtopiaRxCellCnt | 1.3.6.1.4.1.6296.9.6.1.1.2.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the number of UTOPIA cells received since the last time the object has been called. The maximum value is 0xFFFF. | ||||
| CdsShdslUtopiaCellDropCnt | 1.3.6.1.4.1.6296.9.6.1.1.2.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the number of UTOPIA cells dropped since the last time the object has been called. The maximum value is 0xFF. | ||||
| CdsShdslUtopiaRxHecErrorCnt | 1.3.6.1.4.1.6296.9.6.1.1.2.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the number of UTOPIA cells with HEC errors since the last time the object has been called. The maximum value is 0xFF. | ||||
| CdsShdslUtopiaTxCellCnt | 1.3.6.1.4.1.6296.9.6.1.1.2.1.22 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the number of UTOPIA cells transmitted since the last time the object has been called. The maximum value is 0xFFFF. | ||||
| CdsShdslRmtNsfCusId | 1.3.6.1.4.1.6296.9.6.1.1.2.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current This object returns the customer identification that was sent by the STU at the other end of the loop. | ||||
| CdsShdslRmtNsfCusData | 1.3.6.1.4.1.6296.9.6.1.1.2.1.24 | OCTET STRING (SIZE (0..4)) | RO | |
column · OCTET STRING (SIZE (0..4)) · read-only · current This object returns non-standard format customer data that was sent by the STU at the other end of the loop. | ||||
| CdsShdslLocalHandshake | 1.3.6.1.4.1.6296.9.6.1.1.2.1.25 | OCTET STRING (SIZE (0..52)) | RO | |
column · OCTET STRING (SIZE (0..52)) · read-only · current This object provides a way to see what capabilities are supported by the local STU. A total of 26 handshake parameters are supported. | ||||
| CdsShdslRemoteHandshake | 1.3.6.1.4.1.6296.9.6.1.1.2.1.26 | OCTET STRING (SIZE (0..52)) | RO | |
column · OCTET STRING (SIZE (0..52)) · read-only · current This object provides a way to see what capabilities are supported by the STU at the other end of the loop. A total of 26 handshake parameters are supported. | ||||
| CdsShdslActualHandshake | 1.3.6.1.4.1.6296.9.6.1.1.2.1.27 | OCTET STRING (SIZE (0..52)) | RO | |
column · OCTET STRING (SIZE (0..52)) · read-only · current This object provides the results of capabilities exchanged during handshake. A total of 26 handshake parameters are supported. | ||||
| CdsShdslRmtTxPower | 1.3.6.1.4.1.6296.9.6.1.1.2.1.28 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides the transmit power of the STU at the other end of the loop. | ||||
| CdsShdslRmtPowerBackoff | 1.3.6.1.4.1.6296.9.6.1.1.2.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether power backoff is enabled or disabled at the STU at the other end of the loop.
| ||||
| CdsShdslAutoRetrainCount | 1.3.6.1.4.1.6296.9.6.1.1.2.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the number of automatic retrains. This counter is only reset when a startup is initiated. | ||||
| CdsShdslEocState | 1.3.6.1.4.1.6296.9.6.1.1.2.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides status information about the eoc stage.
| ||||
| CdsShdslFramerOneSecondCnt | 1.3.6.1.4.1.6296.9.6.1.1.2.1.32 | OCTET STRING (SIZE (0..6)) | RO | |
column · OCTET STRING (SIZE (0..6)) · read-only · current This object provides CRC, SEGA, and LOSW defect one second error counts, and should be called every second. | ||||
| CdsShdslNtrFault | 1.3.6.1.4.1.6296.9.6.1.1.2.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the Network Timing Recovery Fault.
| ||||
| CdsShdslCpeMasterCore | 1.3.6.1.4.1.6296.9.6.1.1.2.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current
| ||||
| CdsShdslParametricTestResult | 1.3.6.1.4.1.6296.9.6.1.1.2.1.35 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the Result of the Parametric Test conducted on the Xcvr.
| ||||
| CdsShdslParametricTestArray | 1.3.6.1.4.1.6296.9.6.1.1.2.1.36 | OCTET STRING (SIZE (0..1024)) | RO | |
column · OCTET STRING (SIZE (0..1024)) · read-only · current Conexant parameter that indicates the Parametric Test Array. | ||||
| TdsShdslLineParamsTable | 1.3.6.1.4.1.6296.9.6.1.1.3 | NA | ||
table · not-accessible · current This MO is proprietary extension of RFC 3276 MIB and contains the proprietary line parameters. | ||||
| RdsShdslLineParamsEntry | 1.3.6.1.4.1.6296.9.6.1.1.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsShdslLineParamsTable. The Table is indexed by ifIndex.
| ||||
| CdsShdslAction | 1.3.6.1.4.1.6296.9.6.1.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies actions that are used to control transceiver operation.
| ||||
| CdsShdslMode | 1.3.6.1.4.1.6296.9.6.1.1.3.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the operational mode of the transceiver.
| ||||
| CdsShdslPowerScale | 1.3.6.1.4.1.6296.9.6.1.1.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to compensate for minor differences in transmit power between designs.
| ||||
| CdsShdslFramerType | 1.3.6.1.4.1.6296.9.6.1.1.3.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This object defines which type of data interface type is used. Note that the non-default values only apply to Conexant chips that support serial interfaces.
| ||||
| CdsShdslAFEType | 1.3.6.1.4.1.6296.9.6.1.1.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This objects defines which AFE is being used.
| ||||
| CdsShdslEncodeCoeffA | 1.3.6.1.4.1.6296.9.6.1.1.3.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object determines the value of encoder coefficient A, as defined in ITU-T G.991.2.
| ||||
| CdsShdslEncodeCoeffB | 1.3.6.1.4.1.6296.9.6.1.1.3.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current This object determines the value of encoder coefficient B, as defined in ITU-T G.991.2
| ||||
| CdsShdslTxEOCBufferLen | 1.3.6.1.4.1.6296.9.6.1.1.3.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current This object determines the number of bytes of EOC data that is buffered by the DSP in the transmit direction.
| ||||
| CdsShdslRxEOCBufferLen | 1.3.6.1.4.1.6296.9.6.1.1.3.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This object determines the number of bytes of EOC data that is buffered by the DSP in the receive direction.
| ||||
| CdsShdslNTR | 1.3.6.1.4.1.6296.9.6.1.1.3.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current This object defines how network-timing recovery is performed.
| ||||
| CdsShdslRxUpstreamFrameSync | 1.3.6.1.4.1.6296.9.6.1.1.3.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Customer-defined value. This object defines the upstream frame sync word. | ||||
| CdsShdslRxDownstreamFrameSync | 1.3.6.1.4.1.6296.9.6.1.1.3.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current This object defines the downstream frame sync word. | ||||
| CdsShdslRxUpstreamStuffBits | 1.3.6.1.4.1.6296.9.6.1.1.3.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Customer-defined value. This object defines the upstream. | ||||
| CdsShdslRxDownstreamStuffBits | 1.3.6.1.4.1.6296.9.6.1.1.3.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This object defines the downstream stuff bits. | ||||
| CdsShdslInitiate | 1.3.6.1.4.1.6296.9.6.1.1.3.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current This object defines which STU initiates a startup. The default is STU-R initiates and STU-C waits.
| ||||
| CdsShdslFramerRxClockMode | 1.3.6.1.4.1.6296.9.6.1.1.3.1.16 | INTEGER | RW | |
column · INTEGER · read-write · current This object determines the source of the receive clock.
| ||||
| CdsShdslFramerRxPllMode | 1.3.6.1.4.1.6296.9.6.1.1.3.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current This object enables or disables the internal PLL.
| ||||
| CdsShdslSerialAtmCiuBufferSize | 1.3.6.1.4.1.6296.9.6.1.1.3.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This object enables the user to set the size of the framer buffer for serial ATM operation.
| ||||
| CdsShdslUtopiaL2TxAddress | 1.3.6.1.4.1.6296.9.6.1.1.3.1.19 | INTEGER | RO | |
column · INTEGER · read-only · current This object selects the appropriate UTOPIA Level 2 address for the transmit interface. | ||||
| CdsShdslUtopiaL2RxAddress | 1.3.6.1.4.1.6296.9.6.1.1.3.1.20 | INTEGER | RO | |
column · INTEGER · read-only · current This object selects the appropriate UTOPIA Level 2 address for the receive interface. | ||||
| CdsShdslTxFramerPulseDelay | 1.3.6.1.4.1.6296.9.6.1.1.3.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, a delay of up to 7 clock cycles can be specified for the transmit frame pulse.
| ||||
| CdsShdslRxFramerPulseDelay | 1.3.6.1.4.1.6296.9.6.1.1.3.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, a delay of up to 7 clock cycles can be specified for the receive frame pulse.
| ||||
| CdsShdslMultiFrameMode | 1.3.6.1.4.1.6296.9.6.1.1.3.1.23 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the multi frame operational mode of the transceiver.
| ||||
| CdsShdslEnable4or6MbpsBitrate | 1.3.6.1.4.1.6296.9.6.1.1.3.1.24 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the operational state of the 4_6Mbps bit rate.
| ||||
| CdsShdslTomDataWord1 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis. | ||||
| CdsShdslTomDataWord2 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis. | ||||
| CdsShdslTomDataWord3 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis. | ||||
| CdsShdslTomDataWord4 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis. | ||||
| CdsShdslSetReqSilenceMode | 1.3.6.1.4.1.6296.9.6.1.1.3.1.29 | INTEGER | RW | |
column · INTEGER · read-write · current This object enables a silent mode for the STU at the opposite end of the loop for approximately one minute. During the silent period, the STU that requested the silent mode could perform whatever operations it wants and the STU at the opposite end will remain in handshake.
| ||||
| CdsShdslSetIndividualRates1 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current This item enables the user to individually enable or disable base rates for N=1 through N=16. The default is all rates enabled. | ||||
| CdsShdslSetIndividualRates2 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.31 | INTEGER | RW | |
column · INTEGER · read-write · current This item enables the user to individually enable or disable base rates for N=17 through N=32. The default is all rates enabled. | ||||
| CdsShdslSetIndividualRates3 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current This item enables the user to individually enable or disable base rates for N=33 through N=36. The default is all rates enabled. | ||||
| CdsShdslSatmCellDelineation | 1.3.6.1.4.1.6296.9.6.1.1.3.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current This object enables the user to enable or disable cell delineation for serial ATM operation. This parameter should be set before a startup.
| ||||
| CdsShdslFramerCellDropOnError | 1.3.6.1.4.1.6296.9.6.1.1.3.1.34 | INTEGER | RW | |
column · INTEGER · read-write · current This object determines whether cells are dropped, i.e., not passed to the host, or not dropped, i.e., passed to the host. This object must be set prior to startup.
| ||||
| CdsShdslGearShiftType | 1.3.6.1.4.1.6296.9.6.1.1.3.1.35 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the Gear Shift Type.
| ||||
| CdsShdslHsNsf | 1.3.6.1.4.1.6296.9.6.1.1.3.1.36 | INTEGER | RW | |
column · INTEGER · read-write · current This object enables or disables nonstandard Information fields for MP, MS, CL, and CLR messages, as defined in ITU-T G.994.1.bis.
| ||||
| CdsShdslHsMaxBitsPerBaud | 1.3.6.1.4.1.6296.9.6.1.1.3.1.37 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the maximum bit per baud.
| ||||
| CdsShdslHsCusId | 1.3.6.1.4.1.6296.9.6.1.1.3.1.38 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the customer identification during handshaking, as described in ITU-T G.994.1.bis. | ||||
| CdsShdslHsCusData0 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.39 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies two words of customer data during handshaking, as defined in ITU-T G.994.1.bis. | ||||
| CdsShdslHsCusData1 | 1.3.6.1.4.1.6296.9.6.1.1.3.1.40 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies two words of customer data during handshaking, as defined in ITU-T G.994.1.bis. | ||||
| CdsShdslHsAnnexBType | 1.3.6.1.4.1.6296.9.6.1.1.3.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current This object allows the customer to choose between support for Annex B, Annex B with Access Network Frequency Plan (ANFP), or both.
| ||||
| CdsShdslAutoRetrain | 1.3.6.1.4.1.6296.9.6.1.1.3.1.42 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables auto-retrain.
| ||||
| CdsShdslArCrcCheck | 1.3.6.1.4.1.6296.9.6.1.1.3.1.43 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables auto-retrain based on CRC errors.
| ||||
| CdsShdslArFramerSyncCheck | 1.3.6.1.4.1.6296.9.6.1.1.3.1.44 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables auto-retrain based on framer synchronization.
| ||||
| CdsShdslArSnrMarginCheck | 1.3.6.1.4.1.6296.9.6.1.1.3.1.45 | INTEGER | RW | |
column · INTEGER · read-write · current Enables or disables auto-retrain based on whether the S/N margin falls below a preset threshold.
| ||||
| CdsShdslArCrcThreshold | 1.3.6.1.4.1.6296.9.6.1.1.3.1.46 | INTEGER (0..1024) | RW | |
column · INTEGER (0..1024) · read-write · current Sets the threshold for the number of frames with CRC errors for autoretrain. | ||||
| CdsShdslArSnrMarginThreshold | 1.3.6.1.4.1.6296.9.6.1.1.3.1.47 | INTEGER | RW | |
column · INTEGER · read-write · current Set the margin threshold for autoretrain.
| ||||
| CdsShdslArRetrainTime | 1.3.6.1.4.1.6296.9.6.1.1.3.1.48 | INTEGER | RW | |
column · INTEGER · read-write · current Sets the time over which the autoretrain parameters must be outside their normal ranges, so that an auto-retrain occurs.
| ||||
| CdsShdslOpStateTrapEnable | 1.3.6.1.4.1.6296.9.6.1.1.3.1.49 | INTEGER | RW | |
column · INTEGER · read-write · current Enables/disables trap indicating a change in op state.
| ||||
| CdsShdslTxFrmrDataClkEdge | 1.3.6.1.4.1.6296.9.6.1.1.3.1.50 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, transmit data can be sampled upon either rising or falling edge of the transmit clock.
| ||||
| CdsShdslRxFrmrDataClkEdge | 1.3.6.1.4.1.6296.9.6.1.1.3.1.51 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, receive data can be valid upon either rising or falling edge of the receive clock.
| ||||
| CdsShdslTxFrmrPulseClkEdge | 1.3.6.1.4.1.6296.9.6.1.1.3.1.52 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be active upon either rising or falling edge.
| ||||
| CdsShdslRxFrmrPulseClkEdge | 1.3.6.1.4.1.6296.9.6.1.1.3.1.53 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be active upon either rising or falling edge.
| ||||
| CdsShdslTxFrmrPulseLvl | 1.3.6.1.4.1.6296.9.6.1.1.3.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be either active high (1) or active low (0).
| ||||
| CdsShdslRxFrmrPulseLvl | 1.3.6.1.4.1.6296.9.6.1.1.3.1.55 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be either active high (1) or active low (0).
| ||||
| CdsShdslUtopiaDataBusWidth | 1.3.6.1.4.1.6296.9.6.1.1.3.1.56 | INTEGER | RO | |
column · INTEGER · read-only · current This parameter is used to specify width of UTOPIA data bus.
| ||||
| CdsShdslFrmrOH | 1.3.6.1.4.1.6296.9.6.1.1.3.1.57 | INTEGER (0..65535) | RW | |
column · INTEGER (0..65535) · read-write · current This object specifies framer OverHead Channel. | ||||
| CdsShdslLoopAttenCrossingTrapEnable | 1.3.6.1.4.1.6296.9.6.1.1.3.1.58 | INTEGER | RW | |
column · INTEGER · read-write · current This Parameter enables or disables the Trap for Loop Attenuation Threshold crossing.
| ||||
| CdsShdslSNRMarginCrossingTrapEnable | 1.3.6.1.4.1.6296.9.6.1.1.3.1.59 | INTEGER | RW | |
column · INTEGER · read-write · current This Parameter enables or disables the Trap for SNR Margin Threshold crossing.
| ||||
| CdsShdslFramerOHAndDefectsTrapEnable | 1.3.6.1.4.1.6296.9.6.1.1.3.1.60 | INTEGER | RW | |
column · INTEGER · read-write · current This Parameter enables or disables the Trap for Framer Overhead and Defects.
| ||||
| CdsShdslParametricTestInputFile | 1.3.6.1.4.1.6296.9.6.1.1.3.1.61 | DisplayString (SIZE (0..56)) | RW | |
column · DisplayString (SIZE (0..56)) · read-write · current Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified. | ||||
| CdsShdslParamHybridLossTestStart | 1.3.6.1.4.1.6296.9.6.1.1.3.1.62 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Indicates Start bin for range of bins to be measured. The default value mentioned is an indicative value only, for exact value refer to document number DO-400523-AN and DO-401163-AN. | ||||
| CdsShdslParamHybridLossTestEnd | 1.3.6.1.4.1.6296.9.6.1.1.3.1.63 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current Indicates End bin for range of bins to be measured. The default value mentioned is an indicative value only. | ||||
| TdsShdslSpanStatusExtnTable | 1.3.6.1.4.1.6296.9.6.1.1.4 | NA | ||
table · not-accessible · current This table is a proprietary extension of hdsl2ShdslSpanStatusTable | ||||
| RdsShdslSpanStatusExtnEntry | 1.3.6.1.4.1.6296.9.6.1.1.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsShdslSpanStatusExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsShdslStatusPMMSMaxLineRate | 1.3.6.1.4.1.6296.9.6.1.1.4.1.1 | Unsigned32 (0..4112000) | RO | |
column · Unsigned32 (0..4112000) · read-only · current This object provides the maximum PMMS rate the line is capable of achieving | ||||
| CdsShdslStatus4WireHsMode | 1.3.6.1.4.1.6296.9.6.1.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Contains the current 4 Wire Handshake Mode Configured
| ||||