DASAN-ADSL-MIB
DASAN Co.,LTD.The MIB module to describe ADSL product.
The MIB module that provides objects that are proprietary and extension to ADSL-
LINE-MIB. The MIB include extension to following Tables.
1.) adslLineTable
2.) adslAtucPhysTable
3.) adslAturPhysTable
4.) adslAtucChanTable
5.) adslAturChanTable
6.) adslAtucPerfDataTable
--7.) adslAturPerfDataTable
8.) adslAtucIntervalTable
--9.) adslAturIntervalTable
10.) adslAtucChanPerfDataTable
11.) adslAturChanPerfDataTable
12.) adslAtucChanIntervalTable
13.) adslAturChanIntervalTable
14.) adslLineConfProfileTable
15.) adslLineAlarmConfProfileTable
The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'.snmptranslate -m DASAN-ADSL-MIB -Tpsnmpwalk -v2c -c <community> -m DASAN-ADSL-MIB <host> 1.3.6.1.4.1.6296.9.5Imports
| ADSL-LINE-MIB | adslAtucChanIntervalNumber, adslAtucIntervalNumber, adslAturChanIntervalNumber, adslLineAlarmConfProfileName, adslLineConfProfileName |
|---|---|
| DASAN-SMI | dasanMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2 |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IdasanAdslMIB | 1.3.6.1.4.1.6296.9.5 | |||
identity The MIB module to describe ADSL product.
The MIB module that provides objects that are proprietary and extension to ADSL-
LINE-MIB. The MIB include extension to following Tables.
1.) adslLineTable
2.) adslAtucPhysTable
3.) adslAturPhysTable
4.) adslAtucChanTable
5.) adslAturChanTable
6.) adslAtucPerfDataTable
--7.) adslAturPerfDataTable
8.) adslAtucIntervalTable
--9.) adslAturIntervalTable
10.) adslAtucChanPerfDataTable
11.) adslAturChanPerfDataTable
12.) adslAtucChanIntervalTable
13.) adslAturChanIntervalTable
14.) adslLineConfProfileTable
15.) adslLineAlarmConfProfileTable
The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'. | ||||
| NdasanAdslLineMIB | 1.3.6.1.4.1.6296.9.5.1 | |||
| NdasanAdslMIBObjects | 1.3.6.1.4.1.6296.9.5.1.1 | |||
| NdsDslSystemParamGroup | 1.3.6.1.4.1.6296.9.5.1.1.1 | |||
| SdsDslSystemDslType | 1.3.6.1.4.1.6296.9.5.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object identifies the firmware to be downloaded.
| ||||
| SdsDslSystemLineCodingType | 1.3.6.1.4.1.6296.9.5.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object indicates ADSL line code type.
| ||||
| SdsDslSystemLineTxCfg | 1.3.6.1.4.1.6296.9.5.1.1.1.3 | Bits | RW | |
scalar · Bits · read-write · current This object indicates transmission capabilities with which the DSL system is configured.
| ||||
| NdsAdslCapabilityGroup | 1.3.6.1.4.1.6296.9.5.1.1.2 | |||
| SdsAdslCapabilityLineTxCap | 1.3.6.1.4.1.6296.9.5.1.1.2.1 | Bits | RO | |
scalar · Bits · read-only · current This bitmap specifies which all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND
| ||||
| TdsAdslLineExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.3 | NA | ||
table · not-accessible · current This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662. | ||||
| RdsAdslLineExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.3.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslLineExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsAdslLineExtnAction | 1.3.6.1.4.1.6296.9.5.1.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
| ||||
| CdsAdslLineExtnUtopiaL2RxAddr | 1.3.6.1.4.1.6296.9.5.1.1.3.1.2 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current This object indicates UTOPIA Level 2 Rx address for a line. | ||||
| CdsAdslLineExtnUtopiaL2TxAddr | 1.3.6.1.4.1.6296.9.5.1.1.3.1.3 | INTEGER (1..254) | RO | |
column · INTEGER (1..254) · read-only · current This object indicates UTOPIA Level 2 Tx address for a line. | ||||
| CdsAdslLineExtnTransAtucCap | 1.3.6.1.4.1.6296.9.5.1.1.3.1.4 | Bits | RO | |
column · Bits · read-only · current The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.
| ||||
| CdsAdslLineExtnTransAtucActual | 1.3.6.1.4.1.6296.9.5.1.1.3.1.5 | Bits | RO | |
column · Bits · read-only · current The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.
| ||||
| CdsAdslLineExtnClockType | 1.3.6.1.4.1.6296.9.5.1.1.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates parameter to set use of either crystal or oscillator.
| ||||
| CdsAdslLineExtnLineDmtTrellis | 1.3.6.1.4.1.6296.9.5.1.1.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.
| ||||
| TdsAdslAtucPhysExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.4 | NA | ||
table · not-accessible · current This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662. | ||||
| RdsAdslAtucPhysExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.4.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAtucPhysExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsAdslAtucPhysExtnOpState | 1.3.6.1.4.1.6296.9.5.1.1.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the operational state of the ATU. Values include idle,handshake, training, etc.
| ||||
| CdsAdslAtucPhysExtnActualStd | 1.3.6.1.4.1.6296.9.5.1.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
| ||||
| CdsAdslAtucPhysExtnBertError | 1.3.6.1.4.1.6296.9.5.1.1.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates the No. of bit errors detected during BERT. | ||||
| CdsAdslAtucPhysExtnTxAtmCellCounter | 1.3.6.1.4.1.6296.9.5.1.1.4.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This object Provides transmit ATM cell counter. | ||||
| CdsAdslAtucPhysExtnRxAtmCellCounter | 1.3.6.1.4.1.6296.9.5.1.1.4.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This object Provides receive ATM cell counter. | ||||
| CdsAdslAtucPhysExtnStartProgress | 1.3.6.1.4.1.6296.9.5.1.1.4.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This object provides current detailed start up information to be used for debugging. | ||||
| CdsAdslAtucPhysExtnIdleBertError | 1.3.6.1.4.1.6296.9.5.1.1.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Number of bit errors. | ||||
| CdsAdslAtucPhysExtnIdleBertCells | 1.3.6.1.4.1.6296.9.5.1.1.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Number of idle cells. | ||||
| CdsAdslAtucPhysExtnBertSync | 1.3.6.1.4.1.6296.9.5.1.1.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates if the Signal is in Sync or not.
| ||||
| CdsAdslAtucPhysExtnParametricTestResult | 1.3.6.1.4.1.6296.9.5.1.1.4.1.10 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the Result of the Parametric Test conducted on the Xcvr.
| ||||
| CdsAdslAtucPhysExtnDataBoostStatus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.21 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether DataBoost is utilized for the connection.
| ||||
| CdsAdslAtucPhysExtnTestArray | 1.3.6.1.4.1.6296.9.5.1.1.4.1.22 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets. | ||||
| CdsAdslAtucPhysExtnChanPerfCD | 1.3.6.1.4.1.6296.9.5.1.1.4.1.23 | INTEGER | RO | |
column · INTEGER · read-only · current The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL). | ||||
| CdsAdslAtucPhysExtnChanPerfBE | 1.3.6.1.4.1.6296.9.5.1.1.4.1.24 | INTEGER | RO | |
column · INTEGER · read-only · current The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL). | ||||
| CdsAdslAtucPhysExtnDeltHLINSCus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.25 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAtucPhysExtnDeltHLINpsus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.26 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | ||||
| CdsAdslAtucPhysExtnDeltHLOGMTus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.27 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAtucPhysExtnDeltHLOGpsus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.28 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | ||||
| CdsAdslAtucPhysExtnDeltQLNMTus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAtucPhysExtnDeltQLNpsus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.30 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets. | ||||
| CdsAdslAtucPhysExtnDeltLastTxState | 1.3.6.1.4.1.6296.9.5.1.1.4.1.31 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).
| ||||
| CdsAdslAtucPhysExtnPMState | 1.3.6.1.4.1.6296.9.5.1.1.4.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current Line Power Management State. (Not available for ADSL).
| ||||
| CdsAdslAtucPhysExtnChanPerfCU | 1.3.6.1.4.1.6296.9.5.1.1.4.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL). | ||||
| CdsAdslAtucPhysExtnExtendedPsdStatus | 1.3.6.1.4.1.6296.9.5.1.1.4.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation.
| ||||
| CdsAdslAtucPhysExtnChipVersion | 1.3.6.1.4.1.6296.9.5.1.1.4.1.35 | INTEGER | RO | |
column · INTEGER · read-only · current GlobespanVirata parameter that indicates the DSP version number. | ||||
| CdsAdslAtucPhysExtnPilotTone | 1.3.6.1.4.1.6296.9.5.1.1.4.1.36 | INTEGER | RO | |
column · INTEGER · read-only · current GlobespanVirata parameter that indicates the Pilot Tone Index. | ||||
| CdsAdslAtucMSGds | 1.3.6.1.4.1.6296.9.5.1.1.4.1.37 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet. | ||||
| CdsAdslAtucPhysExtnPsdMaskMode | 1.3.6.1.4.1.6296.9.5.1.1.4.1.38 | INTEGER | RO | |
column · INTEGER · read-only · current GlobespanVirata parameter that indicates the actual Psd Mask currently being used.
| ||||
| TdsAdslAturPhysExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.5 | NA | ||
table · not-accessible · current This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR. | ||||
| RdsAdslAturPhysExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.5.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAturPhysExtnTable. The Table is indexed by IfIndex.
| ||||
| CdsAdslAturPhysExtnConfig | 1.3.6.1.4.1.6296.9.5.1.1.5.1.1 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode). | ||||
| CdsAdslAturPhysExtnChanPerfCD | 1.3.6.1.4.1.6296.9.5.1.1.5.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL). | ||||
| CdsAdslAturPhysExtnChanPerfCU | 1.3.6.1.4.1.6296.9.5.1.1.5.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL). | ||||
| CdsAdslAturPhysExtnChanPerfBE | 1.3.6.1.4.1.6296.9.5.1.1.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL). | ||||
| CdsAdslAturPhysExtnDeltHLINSCds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAturPhysExtnDeltHLINpsds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.6 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets. | ||||
| CdsAdslAturPhysExtnDeltHLOGMTds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAturPhysExtnDeltHLOGpsus | 1.3.6.1.4.1.6296.9.5.1.1.5.1.8 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAturPhysExtnDeltQLNMTds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus). | ||||
| CdsAdslAturPhysExtnDeltQLNpsds | 1.3.6.1.4.1.6296.9.5.1.1.5.1.10 | OCTET STRING (SIZE (0..42)) | RO | |
column · OCTET STRING (SIZE (0..42)) · read-only · current DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets. | ||||
| CdsAdslAturPhysExtnDeltLastTxState | 1.3.6.1.4.1.6296.9.5.1.1.5.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).
| ||||
| CdsAdslAturMSGus | 1.3.6.1.4.1.6296.9.5.1.1.5.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet. | ||||
| TdsAdslAtucChanExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.6 | NA | ||
table · not-accessible · current This table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662. | ||||
| RdsAdslAtucChanExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.6.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAtucChanExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsAdslAtucChanExtnCurrAtmStatus | 1.3.6.1.4.1.6296.9.5.1.1.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'.
| ||||
| CdsAdslAtucChanExtnRsSymbols | 1.3.6.1.4.1.6296.9.5.1.1.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1. | ||||
| CdsAdslAtucChanExtnRsDepth | 1.3.6.1.4.1.6296.9.5.1.1.6.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1. | ||||
| CdsAdslAtucChanExtnRsRedundancy | 1.3.6.1.4.1.6296.9.5.1.1.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction. | ||||
| TdsAdslAturChanExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.7 | NA | ||
table · not-accessible · current This table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125). | ||||
| RdsAdslAturChanExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.7.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAturChanExtnTable. The Table is indexed by IfIndex.
| ||||
| CdsAdslAturChanExtnCurrAtmStatus | 1.3.6.1.4.1.6296.9.5.1.1.7.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect.
| ||||
| CdsAdslAturChanExtnRsSymbols | 1.3.6.1.4.1.6296.9.5.1.1.7.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1. | ||||
| CdsAdslAturChanExtnRsDepth | 1.3.6.1.4.1.6296.9.5.1.1.7.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1. | ||||
| CdsAdslAturChanExtnRsRedundancy | 1.3.6.1.4.1.6296.9.5.1.1.7.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction. | ||||
| TdsAdslAtucPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.8 | NA | ||
table · not-accessible · current This table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662. | ||||
| RdsAdslAtucPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.8.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAtucPerfDataExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsAdslAtucPerfDataExtnStatFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1 | ||||
| CdsAdslAtucPerfDataExtnStatFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2 | ||||
| CdsAdslAtucPerfDataExtnStatSesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7 | ||||
| CdsAdslAtucPerfDataExtnStatUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9 | ||||
| CdsAdslAtucPerfDataExtnCurr15MinFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1 | ||||
| CdsAdslAtucPerfDataExtnCurr15MinFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2 | ||||
| CdsAdslAtucPerfDataExtnCurr15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7 | ||||
| CdsAdslAtucPerfDataExtnCurr15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9 | ||||
| CdsAdslAtucPerfDataExtnCurr1DayFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1 | ||||
| CdsAdslAtucPerfDataExtnCurr1DayFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2 | ||||
| CdsAdslAtucPerfDataExtnCurr1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7 | ||||
| CdsAdslAtucPerfDataExtnCurr1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9 | ||||
| CdsAdslAtucPerfDataExtnPrev1DayFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1 | ||||
| CdsAdslAtucPerfDataExtnPrev1DayFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.8.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2 | ||||
| CdsAdslAtucPerfDataExtnPrev1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7 | ||||
| CdsAdslAtucPerfDataExtnPrev1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9 | ||||
| CdsAdslAtucPerfDataExtnPrev1DayTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.8.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current Total elapsed seconds in this interval in seconds. | ||||
| CdsAdslAtucPerfDataExtnStatFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL). | ||||
| CdsAdslAtucPerfDataExtnCurr15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL). | ||||
| CdsAdslAtucPerfDataExtnCurr1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.20 | Gauge32 | RO | |
column · Gauge32 · read-only · current NCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL). | ||||
| CdsAdslAtucPerfDataExtnPrev1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL). | ||||
| CdsAdslAtucPerfDataExtnStatLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.22 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL). | ||||
| CdsAdslAtucPerfDataExtnCurr15MinLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAtucPerfDataExtnCurr1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.24 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAtucPerfDataExtnPrev1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.8.1.25 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| TdsAdslAturPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.9 | NA | ||
table · not-accessible · current This table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440). | ||||
| RdsAdslAturPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.9.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAturPerfDataExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsAdslAturPerfDataExtnStatSesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnCurr15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnCurr1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnPrev1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnStatUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnCurr15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnCurr1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnPrev1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnStatFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current Count of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL). | ||||
| CdsAdslAturPerfDataExtnCurr15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL). | ||||
| CdsAdslAturPerfDataExtnCurr1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL). | ||||
| CdsAdslAturPerfDataExtnPrev1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL). | ||||
| CdsAdslAturPerfDataExtnStatLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL). | ||||
| CdsAdslAturPerfDataExtnCurr15MinLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnCurr1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| CdsAdslAturPerfDataExtnPrev1DayLossL | 1.3.6.1.4.1.6296.9.5.1.1.9.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current . | ||||
| TdsAdslAtucIntervalExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.10 | NA | ||
table · not-accessible · current This table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662. | ||||
| RdsAdslAtucIntervalExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.10.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAtucIntervalExtnTable. The Table is indexed by ifIndex and adslAtucIntervalNumber. | ||||
| CdsAdslAtucIntervalExtnFastR | 1.3.6.1.4.1.6296.9.5.1.1.10.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current This variable indicates Count of seconds in the interval when there was Fast Retrains. | ||||
| CdsAdslAtucIntervalExtnFailedFastR | 1.3.6.1.4.1.6296.9.5.1.1.10.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current This variable indicates Count of seconds in the interval when there was Failed Fast Retrains. | ||||
| CdsAdslAtucIntervalExtnSesL | 1.3.6.1.4.1.6296.9.5.1.1.10.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current This variable indicates Count of seconds in the interval when there was severely errored seconds. | ||||
| CdsAdslAtucIntervalExtnUasL | 1.3.6.1.4.1.6296.9.5.1.1.10.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current This variable indicates Count of seconds in the interval when there was unavailable errored seconds. | ||||
| CdsAdslAtucIntervalExtnTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.10.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current This variable indicates the total Elapsed time in this interval. | ||||
| TdsAdslAtucChanPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.12 | NA | ||
table · not-accessible · current This table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable. | ||||
| RdsAdslAtucChanPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.12.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable. The Table is indexed by ifIndex.
| ||||
| CdsAdslAtucChanPerfDataExtnTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.12.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current Total elapsed seconds in this interval. | ||||
| CdsAdslAtucChanPerfDataExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of no cell delineation(ncd) on this channel. | ||||
| CdsAdslAtucChanPerfDataExtnOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of out of cell delineation (ocd) on this channel. | ||||
| CdsAdslAtucChanPerfDataExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current Header error check counter(hec) on this channel. | ||||
| CdsAdslAtucChanPerfDataExtnCurr15MinNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of no cell delineation(ncd) on this channel within the current 15 minute time interval. | ||||
| CdsAdslAtucChanPerfDataExtnCurr15MinOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval. | ||||
| CdsAdslAtucChanPerfDataExtnCurr15MinHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Header error check counter(hec) on this channel within the current 15 minute time interval. | ||||
| CdsAdslAtucChanPerfDataExtnCurr1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of no cell delineation (ncd) on this channel within the current 1 day time interval. | ||||
| CdsAdslAtucChanPerfDataExtnCurr1DayOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of out of cell delineation (ocd) on this channel within the current 1 day time interval. | ||||
| CdsAdslAtucChanPerfDataExtnCurr1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current Header error check counter (hec) on this channel within the current 1 day time interval. | ||||
| CdsAdslAtucChanPerfDataExtnPrev1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period. | ||||
| CdsAdslAtucChanPerfDataExtnPrev1DayOcd | 1.3.6.1.4.1.6296.9.5.1.1.12.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period. | ||||
| CdsAdslAtucChanPerfDataExtnPrev1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.12.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current Header error check counter(hec) on this channel within the most recent previous 1-day period. | ||||
| TdsAdslAturChanPerfDataExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.13 | NA | ||
table · not-accessible · current This table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved). | ||||
| RdsAdslAturChanPerfDataExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.13.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable. The Table is indexed by IfIndex.
| ||||
| CdsAdslAturChanPerfDataExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with no cell delineation(NCD) error on this channel. | ||||
| CdsAdslAturChanPerfDataExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with Header error check (HEC) error on this channel. | ||||
| CdsAdslAturChanPerfDataExtnCurr15MinNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval. | ||||
| CdsAdslAturChanPerfDataExtnCurr15MinHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval. | ||||
| CdsAdslAturChanPerfDataExtnCurr1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval. | ||||
| CdsAdslAturChanPerfDataExtnCurr1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval. | ||||
| CdsAdslAturChanPerfDataExtnPrev1DayNcd | 1.3.6.1.4.1.6296.9.5.1.1.13.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period. | ||||
| CdsAdslAturChanPerfDataExtnPrev1DayHec | 1.3.6.1.4.1.6296.9.5.1.1.13.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current Number of packets with Header error check (HEC) error on this channel within the most recent previous period. | ||||
| TdsAdslAtucChanIntervalExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.14 | NA | ||
table · not-accessible · current This table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662. | ||||
| RdsAdslAtucChanIntervalExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.14.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable. The Table is indexed by ifIndex and adslAtucChanIntervalNumber. | ||||
| CdsAdslAtucChanIntervalExtnTimeElapsed | 1.3.6.1.4.1.6296.9.5.1.1.14.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current Total time elapsed (in seconds) in this interval. | ||||
| CdsAdslAtucChanIntervalExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.14.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates count of no cell delineation on this channel for this interval. | ||||
| CdsAdslAtucChanIntervalExtnOcd | 1.3.6.1.4.1.6296.9.5.1.1.14.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates count of out cell delineation on this channel for this interval. | ||||
| CdsAdslAtucChanIntervalExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.14.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current Indicates Header error check counter on this channel during this interval. | ||||
| TdsAdslAturChanIntervalExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.15 | NA | ||
table · not-accessible · current This table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval. | ||||
| RdsAdslAturChanIntervalExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.15.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslAturChanIntervalExtnTable. The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber. | ||||
| CdsAdslAturChanIntervalExtnNcd | 1.3.6.1.4.1.6296.9.5.1.1.15.1.1 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates count of no cell delineation on this channel for this interval. | ||||
| CdsAdslAturChanIntervalExtnHec | 1.3.6.1.4.1.6296.9.5.1.1.15.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current Indicates Header error check counter on this channel during this interval. | ||||
| TdsAdslLineConfProfileExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.16 | NA | ||
table · not-accessible · current This table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable. | ||||
| RdsAdslLineConfProfileExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.16.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslLineConfProfileExtnTable. The Table is indexed by adslLineConfProfileName. | ||||
| CdsAdslLineConfProfileName | 1.3.6.1.4.1.6296.9.5.1.1.16.1.1 | OCTET STRING (SIZE (0..32)) | NA | |
column · OCTET STRING (SIZE (0..32)) · not-accessible · current This object is used by the line configuration table in order to identify a row of this table. | ||||
| CdsAdslLineConfProfileExtnRsIntCorrectionUp | 1.3.6.1.4.1.6296.9.5.1.1.16.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.
| ||||
| CdsAdslLineConfProfileExtnLineType | 1.3.6.1.4.1.6296.9.5.1.1.16.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to configure the ADSL physical line mode.
| ||||
| CdsAdslLineConfProfileExtnTxEndBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.5 | INTEGER (6..511) | RW | |
column · INTEGER (6..511) · read-write · current Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively. | ||||
| CdsAdslLineConfProfileExtnTxStartBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.6 | INTEGER (6..511) | RW | |
column · INTEGER (6..511) · read-write · current Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively. | ||||
| CdsAdslLineConfProfileExtnRxStartBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.8 | INTEGER (1..511) | RW | |
column · INTEGER (1..511) · read-write · current Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01. | ||||
| CdsAdslLineConfProfileExtnRxEndBin | 1.3.6.1.4.1.6296.9.5.1.1.16.1.9 | INTEGER (6..511) | RW | |
column · INTEGER (6..511) · read-write · current Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively. | ||||
| CdsAdslLineConfProfileExtnRxBinAdjust | 1.3.6.1.4.1.6296.9.5.1.1.16.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current Employs Rx Start/End bin settings.
| ||||
| CdsAdslLineConfProfileExtnStandard | 1.3.6.1.4.1.6296.9.5.1.1.16.1.13 | INTEGER | RW | |
column · INTEGER · read-write · current Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
| ||||
| CdsAdslLineConfProfileExtnTxPowerAttenuation | 1.3.6.1.4.1.6296.9.5.1.1.16.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current Specifies value of Tx power attenuation.
| ||||
| CdsAdslLineConfProfileExtnRsFastOvrhdDown | 1.3.6.1.4.1.6296.9.5.1.1.16.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Sets the percentage overhead for the downstream-fast buffer.
| ||||
| CdsAdslLineConfProfileExtnIntCorrectionDown | 1.3.6.1.4.1.6296.9.5.1.1.16.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.
| ||||
| CdsAdslLineConfProfileExtnRsFastOvrhdUp | 1.3.6.1.4.1.6296.9.5.1.1.16.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current Sets the 4576014verhead for the upstream-fast buffer.
| ||||
| CdsAdslLineConfProfileExtnAnnexType | 1.3.6.1.4.1.6296.9.5.1.1.16.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
| ||||
| CdsAdslLineConfProfileExtnMaxDCo | 1.3.6.1.4.1.6296.9.5.1.1.16.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current This object is used to indicate Maximum interleaving depth supported by the customer's hardware.
| ||||
| CdsAdslLineConfProfileExtnAdvertisedCapabilities | 1.3.6.1.4.1.6296.9.5.1.1.16.1.32 | INTEGER | RW | |
column · INTEGER · read-write · current Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+.
| ||||
| CdsAdslLineConfProfileExtnPsdMaskType | 1.3.6.1.4.1.6296.9.5.1.1.16.1.33 | INTEGER | RW | |
column · INTEGER · read-write · current Selects the PSD mask option to be used.
| ||||
| CdsAdslLineConfProfileExtnLineDmtConfMode | 1.3.6.1.4.1.6296.9.5.1.1.16.1.34 | INTEGER | RW | |
column · INTEGER · read-write · current Selects if there is overlap or no overlap of bins.
| ||||
| CdsAdslLineConfProfileExtnUpstreamPSD | 1.3.6.1.4.1.6296.9.5.1.1.16.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only.
| ||||
| CdsAdslLineConfProfileExtnPMMode | 1.3.6.1.4.1.6296.9.5.1.1.16.1.42 | Bits | RW | |
column · Bits · read-write · current PM-related parameter used by the ATU-C to set the allowed link states.
| ||||
| CdsAdslLineConfProfileExtnPML0Time | 1.3.6.1.4.1.6296.9.5.1.1.16.1.43 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state. | ||||
| CdsAdslLineConfProfileExtnPML2Time | 1.3.6.1.4.1.6296.9.5.1.1.16.1.44 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. | ||||
| CdsAdslLineConfProfileExtnPML2ATPR | 1.3.6.1.4.1.6296.9.5.1.1.16.1.45 | INTEGER (0..31) | RW | |
column · INTEGER (0..31) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state. | ||||
| CdsAdslLineConfProfileExtnPML2Rate | 1.3.6.1.4.1.6296.9.5.1.1.16.1.46 | INTEGER (256000..1024000) | RW | |
column · INTEGER (256000..1024000) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s. | ||||
| CdsAdslLineConfProfileExtnAtucConfMinINP | 1.3.6.1.4.1.6296.9.5.1.1.16.1.63 | INTEGER (0..400) | RO | |
column · INTEGER (0..400) · read-only · current Parameter used to specify the minimum impulse noise protection for the downstream bearer channel. | ||||
| CdsAdslLineConfProfileExtnPML2EntryThresholdRate | 1.3.6.1.4.1.6296.9.5.1.1.16.1.64 | INTEGER (256000..1024000) | RW | |
column · INTEGER (256000..1024000) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and must be less than or equal to the value of GSMIB_adslAtucConfGsPML2Exit ThresholdRate. | ||||
| CdsAdslLineConfProfileExtnPML2ExitThresholdRate | 1.3.6.1.4.1.6296.9.5.1.1.16.1.65 | INTEGER (256000..1024000) | RW | |
column · INTEGER (256000..1024000) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2). The data rate is coded in bit/s, and must be less than the value of GSMIB_adslAtucConfPML2MinRate. | ||||
| CdsAdslLineConfProfileExtnPML2EntryRateMinTime | 1.3.6.1.4.1.6296.9.5.1.1.16.1.66 | INTEGER (900..65535) | RW | |
column · INTEGER (900..65535) · read-write · current PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay below GSMIB_adslAtucConfGsPML2EntryThresholdRate before autonomous entry into low power state (L2). The minimum entry rate time is coded in seconds, and can range from 900 to 65535. | ||||
| TdsAdslLineAlarmConfProfileExtnTable | 1.3.6.1.4.1.6296.9.5.1.1.17 | NA | ||
table · not-accessible · current This table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662. | ||||
| RdsAdslLineAlarmConfProfileExtnEntry | 1.3.6.1.4.1.6296.9.5.1.1.17.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable. The Table is indexed by adslLineAlarmConfProfileName. | ||||
| CdsAdslLineAlarmConfProfileName | 1.3.6.1.4.1.6296.9.5.1.1.17.1.1 | OCTET STRING (SIZE (0..32)) | NA | |
column · OCTET STRING (SIZE (0..32)) · not-accessible · current This object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEND | ||||
| CdsAdslLineAlarmExtnAtucThresh15MinFailFastR | 1.3.6.1.4.1.6296.9.5.1.1.17.1.2 | INTEGER (0..900) | RW | |
column · INTEGER (0..900) · read-write · current The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap. | ||||
| CdsAdslLineAlarmExtnAtucThresh15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.3 | INTEGER (0..900) | RW | |
column · INTEGER (0..900) · read-write · current The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap. | ||||
| CdsAdslLineAlarmExtnAtucThresh15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.4 | INTEGER (0..900) | RW | |
column · INTEGER (0..900) · read-write · current The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be generated. | ||||
| CdsAdslLineAlarmExtnAtucOpStateTrapEnable | 1.3.6.1.4.1.6296.9.5.1.1.17.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Enables and disables the OpStateChangeTrap.
| ||||
| CdsAdslLineAlarmExtnAtucThresh15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.6 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayLofs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.7 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayLoss | 1.3.6.1.4.1.6296.9.5.1.1.17.1.8 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayLols | 1.3.6.1.4.1.6296.9.5.1.1.17.1.9 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayLprs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.10 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayESs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.11 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.12 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.13 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAtucThresh1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.14 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'. | ||||
| CdsAdslLineAlarmExtnAturThresh15MinFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.15 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DayLofs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.16 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DayLoss | 1.3.6.1.4.1.6296.9.5.1.1.17.1.17 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DayLprs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.18 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DayESs | 1.3.6.1.4.1.6296.9.5.1.1.17.1.19 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DaySesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.20 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DayUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.21 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'. | ||||
| CdsAdslLineAlarmExtnAturThresh1DayFecsL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.22 | Integer32 (0..86400) | RW | |
column · Integer32 (0..86400) · read-write · current The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'. | ||||
| CdsAdslLineAlarmExtnAturThresh15MinSesL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.23 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'. | ||||
| CdsAdslLineAlarmExtnAturThresh15MinUasL | 1.3.6.1.4.1.6296.9.5.1.1.17.1.24 | Integer32 (0..900) | RW | |
column · Integer32 (0..900) · read-write · current The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'. | ||||
| CdsAdslLineAlarmExtnAtucPmStateTrapEnable | 1.3.6.1.4.1.6296.9.5.1.1.17.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current Enables and disables the PmStateChangeTrap.
| ||||
| NdsAdslTrap | 1.3.6.1.4.1.6296.9.5.1.2 | |||
| NdsAdslAtucTraps | 1.3.6.1.4.1.6296.9.5.1.2.1 | |||
| !dsAdslAtucOpStateChangeTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.1 | |||
notification · current Operational state of the transceiver is changed
| ||||
| !dsAdslAtucPmStateChangeTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.2 | |||
notification · current Current PM state of the transceiver is changed.
| ||||
| !dsAdslAtucPerfFailedFastRThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.3 | |||
notification · current Failed retrains 15-minute interval threshold reached | ||||
| !dsAdslAtucPerfSesLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.4 | |||
notification · current Severely Errored Seconds 15-minute interval threshold reached | ||||
| !dsAdslAtucPerfUasLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.5 | |||
notification · current Unavailable Errored Seconds 15-minute interval threshold reached | ||||
| !dsAdslAtucPerfFecsLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.6 | |||
notification · current Forward error correction 15-minute interval threshold reached | ||||
| !dsAdslAtucPerfLofsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.7 | |||
notification · current Loss of Frames 1-day interval threshold reached | ||||
| !dsAdslAtucPerfLossThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.8 | |||
notification · current Loss of Signal 1-day interval threshold reached | ||||
| !dsAdslAtucPerfLolsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.9 | |||
notification · current Loss of Link 1-day interval threshold reached | ||||
| !dsAdslAtucPerfLprsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.10 | |||
notification · current Loss of Power 1-day interval threshold reached | ||||
| !dsAdslAtucPerfESsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.11 | |||
notification · current Errored Seconds 1-day interval threshold reached | ||||
| !dsAdslAtucPerfSesLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.12 | |||
notification · current Severely Errored Seconds 1-day interval threshold reached | ||||
| !dsAdslAtucPerfUasLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.13 | |||
notification · current Unavailable Errored Seconds 1-day interval threshold reached | ||||
| !dsAdslAtucPerfFecsLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.1.14 | |||
notification · current Forward error correction Seconds 1-day interval threshold reached | ||||
| NdsAdslAturTraps | 1.3.6.1.4.1.6296.9.5.1.2.2 | |||
| !dsAdslAturSesLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.1 | |||
notification · current Severely Errored Seconds 15-minute interval threshold reached | ||||
| !dsAdslAturUasLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.2 | |||
notification · current Unavailable Errored Seconds 15-minute interval threshold reached | ||||
| !dsAdslAturPerfFecsLThreshTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.3 | |||
notification · current Forward error correction 15-minute interval threshold reached | ||||
| !dsAdslAturPerfLofsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.4 | |||
notification · current Loss of Frames 1-day interval threshold reached | ||||
| !dsAdslAturPerfLossThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.5 | |||
notification · current Loss of Signal 1-day interval threshold reached | ||||
| !dsAdslAturPerfLprsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.6 | |||
notification · current Loss of Power 1-day interval threshold reached | ||||
| !dsAdslAturPerfESsThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.7 | |||
notification · current Errored Seconds 1-day interval threshold reached | ||||
| !dsAdslAturPerfSesLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.8 | |||
notification · current Severely Errored Seconds 1-day interval threshold reached | ||||
| !dsAdslAturPerfUasLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.9 | |||
notification · current Unavailable Errored Seconds 1-day interval threshold reached | ||||
| !dsAdslAturPerfFecsLThresh1DayTrap | 1.3.6.1.4.1.6296.9.5.1.2.2.10 | |||
notification · current Forward error correction Seconds 1-day interval threshold is reached | ||||
Traps / Notifications
- dsAdslAtucOpStateChangeTrap
1.3.6.1.4.1.6296.9.5.1.2.1.1 - dsAdslAtucPerfESsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.11 - dsAdslAtucPerfFailedFastRThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.1.3 - dsAdslAtucPerfFecsLThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.14 - dsAdslAtucPerfFecsLThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.1.6 - dsAdslAtucPerfLofsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.7 - dsAdslAtucPerfLolsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.9 - dsAdslAtucPerfLossThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.8 - dsAdslAtucPerfLprsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.10 - dsAdslAtucPerfSesLThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.12 - dsAdslAtucPerfSesLThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.1.4 - dsAdslAtucPerfUasLThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.1.13 - dsAdslAtucPerfUasLThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.1.5 - dsAdslAtucPmStateChangeTrap
1.3.6.1.4.1.6296.9.5.1.2.1.2 - dsAdslAturPerfESsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.7 - dsAdslAturPerfFecsLThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.10 - dsAdslAturPerfFecsLThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.2.3 - dsAdslAturPerfLofsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.4 - dsAdslAturPerfLossThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.5 - dsAdslAturPerfLprsThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.6 - dsAdslAturPerfSesLThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.8 - dsAdslAturPerfUasLThresh1DayTrap
1.3.6.1.4.1.6296.9.5.1.2.2.9 - dsAdslAturSesLThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.2.1 - dsAdslAturUasLThreshTrap
1.3.6.1.4.1.6296.9.5.1.2.2.2