WEBMON-EDGE-MATRIX-MIB
Dantel, Inc.WebMon Edge-Matrix MIB.
snmptranslate -m WEBMON-EDGE-MATRIX-MIB -Tpsnmpwalk -v2c -c <community> -m WEBMON-EDGE-MATRIX-MIB <host> 1.3.6.1.4.1.994.3.4.3Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ndantel | 1.3.6.1.4.1.994 | ||||||||||||||||||||
| NdantelProducts | 1.3.6.1.4.1.994.3 | ||||||||||||||||||||
| NwebMon | 1.3.6.1.4.1.994.3.4 | ||||||||||||||||||||
node · current The parent node representing the WebMon device. | |||||||||||||||||||||
| ImoduleIdentity | 1.3.6.1.4.1.994.3.4.3 | ||||||||||||||||||||
identity WebMon Edge-Matrix MIB. | |||||||||||||||||||||
| GnotificationGroup | 1.3.6.1.4.1.994.3.4.4 | ||||||||||||||||||||
group · current Group containing all the notification types. | |||||||||||||||||||||
| GobjectGroup | 1.3.6.1.4.1.994.3.4.5 | ||||||||||||||||||||
group · current Group containing all the objects.
| |||||||||||||||||||||
| Ntraps | 1.3.6.1.4.1.994.3.4.6 | ||||||||||||||||||||
node · current Category containing all the traps. Each trap has sibling data nodes that contain the data associated with the most recently sent trap of that particular type. A GET-REQUEST sent to the WebMon for those data nodes will allow you to verify the data received in a recent trap. | |||||||||||||||||||||
| NanalogInputs | 1.3.6.1.4.1.994.3.4.6.1 | ||||||||||||||||||||
node · current Subtree containing trap and associated data for analog inputs. Analog inputs measure a value. The input always has a live reading, but traps are only sent on events, which are defined as the live reading crossing (or passing) one of the user-defined thresholds. | |||||||||||||||||||||
| !analogEventTrap | 1.3.6.1.4.1.994.3.4.6.1.1 | ||||||||||||||||||||
notification · current Notification sent upon an analog input reading crossing a threshold. | |||||||||||||||||||||
| SanalogInputDescription | 1.3.6.1.4.1.994.3.4.6.1.2 | DescriptionString | RO | Temperature | |||||||||||||||||
scalar · DescriptionString · read-only · current Description of the analog input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SanalogLiveLevel | 1.3.6.1.4.1.994.3.4.6.1.3 | Level | RO | ||||||||||||||||||
scalar · Level · read-only · current The level associated with the analogLiveReading for this input. | |||||||||||||||||||||
| SanalogLiveReading | 1.3.6.1.4.1.994.3.4.6.1.5 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current The reading from the analog input described by analogInputDescription at the time the trap was sent. It is in the units described in analogUnitsOfMeasurement. | |||||||||||||||||||||
| SanalogUnitsOfMeasurement | 1.3.6.1.4.1.994.3.4.6.1.6 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current The units of measurement associated with the analogLiveReading. | |||||||||||||||||||||
| SanalogLiveState | 1.3.6.1.4.1.994.3.4.6.1.7 | AnalogState | RO | ||||||||||||||||||
scalar · AnalogState · read-only · current The state associated with analogLiveReading. | |||||||||||||||||||||
| SanalogLiveStateDescription | 1.3.6.1.4.1.994.3.4.6.1.8 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current The description of the range in which the analogLiveReading is. | |||||||||||||||||||||
| SanalogAlarmState | 1.3.6.1.4.1.994.3.4.6.1.9 | Boolean | RO | ||||||||||||||||||
scalar · Boolean · read-only · current If true this field indicates the alarmed state. If false this field indicates the not alarmed state. | |||||||||||||||||||||
| SanalogSourceDescription | 1.3.6.1.4.1.994.3.4.6.1.101 | DescriptionString | NA | ||||||||||||||||||
scalar · DescriptionString · not-accessible · current Description of the event source. | |||||||||||||||||||||
| SanalogSourceIndex | 1.3.6.1.4.1.994.3.4.6.1.102 | Integer32 | NA | ||||||||||||||||||
scalar · Integer32 · not-accessible · current Index of the event source. | |||||||||||||||||||||
| NdigitalInputs | 1.3.6.1.4.1.994.3.4.6.2 | ||||||||||||||||||||
node · current Subtree containing trap and associated data for digital inputs. Digital inputs monitor a binary state. The input is always in one of two states. Traps are sent on events, which are defined as a change in the live state. | |||||||||||||||||||||
| !digitalEventTrap | 1.3.6.1.4.1.994.3.4.6.2.1 | ||||||||||||||||||||
notification · current Notification sent upon change of state on a digital input. | |||||||||||||||||||||
| SdigitalInputDescription | 1.3.6.1.4.1.994.3.4.6.2.2 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current Description of the digital input. | |||||||||||||||||||||
| SdigitalLiveLevel | 1.3.6.1.4.1.994.3.4.6.2.3 | Level | RO | ||||||||||||||||||
scalar · Level · read-only · current The level associated with digitalLiveState for this input. | |||||||||||||||||||||
| SdigitalLiveState | 1.3.6.1.4.1.994.3.4.6.2.4 | DigitalState | RO | ||||||||||||||||||
scalar · DigitalState · read-only · current The state of the digital input described by digitalInputDescription at the time the trap was sent. | |||||||||||||||||||||
| SdigitalLiveStateDescription | 1.3.6.1.4.1.994.3.4.6.2.5 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current The description of the digitalLiveState. | |||||||||||||||||||||
| SdigitalAlarmState | 1.3.6.1.4.1.994.3.4.6.2.6 | Boolean | RO | ||||||||||||||||||
scalar · Boolean · read-only · current If true this field indicates the alarmed state. If false this field indicates the not alarmed state. | |||||||||||||||||||||
| SdigitalSourceDescription | 1.3.6.1.4.1.994.3.4.6.2.101 | DescriptionString | NA | ||||||||||||||||||
scalar · DescriptionString · not-accessible · current Description of the event source. | |||||||||||||||||||||
| SdigitalSourceIndex | 1.3.6.1.4.1.994.3.4.6.2.102 | Integer32 | NA | ||||||||||||||||||
scalar · Integer32 · not-accessible · current Index of the event source. | |||||||||||||||||||||
| NremoteDevices | 1.3.6.1.4.1.994.3.4.6.3 | ||||||||||||||||||||
node · current Subtree containing trap and associated data for monitored remote devices. Remote devices are monitored for network connectivity. The device's live state is always either online or offline. Traps are sent on events, which are defined as a change in the live state. | |||||||||||||||||||||
| !remoteDeviceEventTrap | 1.3.6.1.4.1.994.3.4.6.3.1 | ||||||||||||||||||||
notification · current Notification sent upon change of state of a remote device. | |||||||||||||||||||||
| SremoteDeviceDescription | 1.3.6.1.4.1.994.3.4.6.3.2 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current Description of the remote device. | |||||||||||||||||||||
| SremoteDeviceLiveLevel | 1.3.6.1.4.1.994.3.4.6.3.3 | Level | RO | ||||||||||||||||||
scalar · Level · read-only · current The level associated with remoteDeviceLiveState. | |||||||||||||||||||||
| SremoteDeviceLiveState | 1.3.6.1.4.1.994.3.4.6.3.4 | ConnectivityState | RO | ||||||||||||||||||
scalar · ConnectivityState · read-only · current The state of the remote device described by remoteDeviceDescription at the time the trap was sent. Online indicates connected, offline indicates not connected. | |||||||||||||||||||||
| SremoteDeviceAlarmState | 1.3.6.1.4.1.994.3.4.6.3.5 | Boolean | RO | ||||||||||||||||||
scalar · Boolean · read-only · current If true this field indicates the alarmed state. If false this field indicates the not alarmed state. | |||||||||||||||||||||
| SremoteDeviceSourceDescription | 1.3.6.1.4.1.994.3.4.6.3.101 | DescriptionString | NA | ||||||||||||||||||
scalar · DescriptionString · not-accessible · current Description of the event source. | |||||||||||||||||||||
| SremoteDeviceSourceIndex | 1.3.6.1.4.1.994.3.4.6.3.102 | Integer32 | NA | ||||||||||||||||||
scalar · Integer32 · not-accessible · current Index of the event source. | |||||||||||||||||||||
| Nfaults | 1.3.6.1.4.1.994.3.4.6.4 | ||||||||||||||||||||
node · current Subtree containing trap and associated data for faults. Faults are conditions internal to the WebMon. The only data associated with this trap is a string that describes the condition. | |||||||||||||||||||||
| !faultTrap | 1.3.6.1.4.1.994.3.4.6.4.1 | ||||||||||||||||||||
notification · current Notification sent when a fault is encountered. | |||||||||||||||||||||
| SfaultDescription | 1.3.6.1.4.1.994.3.4.6.4.2 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current Description of the condition at the WebMon. | |||||||||||||||||||||
| SfaultLiveLevel | 1.3.6.1.4.1.994.3.4.6.4.3 | Level | RO | ||||||||||||||||||
scalar · Level · read-only · current The level associated with faultStateDescription. | |||||||||||||||||||||
| SfaultStateDescription | 1.3.6.1.4.1.994.3.4.6.4.4 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current The description of the state of this fault. | |||||||||||||||||||||
| SfaultAlarmState | 1.3.6.1.4.1.994.3.4.6.4.5 | Boolean | RO | ||||||||||||||||||
scalar · Boolean · read-only · current If true this field indicates the alarmed state. If false this field indicates the not alarmed state. | |||||||||||||||||||||
| SfaultSourceDescription | 1.3.6.1.4.1.994.3.4.6.4.101 | DescriptionString | NA | ||||||||||||||||||
scalar · DescriptionString · not-accessible · current Description of the event source. | |||||||||||||||||||||
| SfaultSourceIndex | 1.3.6.1.4.1.994.3.4.6.4.102 | Integer32 | NA | ||||||||||||||||||
scalar · Integer32 · not-accessible · current Index of the event source. | |||||||||||||||||||||
| Nconfiguration | 1.3.6.1.4.1.994.3.4.7 | ||||||||||||||||||||
| NsystemGeneral | 1.3.6.1.4.1.994.3.4.7.1 | ||||||||||||||||||||
| SsystemGeneralLocation | 1.3.6.1.4.1.994.3.4.7.1.2 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Location on the device. | |||||||||||||||||||||
| SsystemGeneralDescription | 1.3.6.1.4.1.994.3.4.7.1.3 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Description of the device. | |||||||||||||||||||||
| SsystemGeneralIpAddress | 1.3.6.1.4.1.994.3.4.7.1.14 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current IP Address of the device. If changed, the new IP address will only take effect after a reset. | |||||||||||||||||||||
| SsystemGeneralSubnetMask | 1.3.6.1.4.1.994.3.4.7.1.15 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Subnet Mask of the device. If changed, the new IP address will only take effect after a reset. | |||||||||||||||||||||
| SsystemGeneralGatewayAddress | 1.3.6.1.4.1.994.3.4.7.1.16 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Gateway Address of the device. If changed, the new IP address will only take effect after a reset. | |||||||||||||||||||||
| SsystemGeneralReadPeriod | 1.3.6.1.4.1.994.3.4.7.1.23 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current The number of minutes until the WebMon resets itself. | |||||||||||||||||||||
| SsystemGeneralMeasureStyle | 1.3.6.1.4.1.994.3.4.7.1.45 | MeasureStyle | RW | ||||||||||||||||||
scalar · MeasureStyle · read-write · current Determines if units are displayed in English or Metric. | |||||||||||||||||||||
| SsystemGeneralMacAddress | 1.3.6.1.4.1.994.3.4.7.1.54 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current The MAC address of the device. | |||||||||||||||||||||
| SsystemGeneralProductType | 1.3.6.1.4.1.994.3.4.7.1.70 | ProductType | RO | ||||||||||||||||||
scalar · ProductType · read-only · current Describes the type of device. | |||||||||||||||||||||
| SsystemGeneralIPPortNum | 1.3.6.1.4.1.994.3.4.7.1.73 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current IP port number to use when connecting to the web page (HTTP). | |||||||||||||||||||||
| SsystemGeneralVersion | 1.3.6.1.4.1.994.3.4.7.1.82 | DescriptionString | RO | 1.19.0 | |||||||||||||||||
scalar · DescriptionString · read-only · current The version of the running software. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsystemGeneralUseResetTime | 1.3.6.1.4.1.994.3.4.7.1.98 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current If enabled, the WebMon will reset periodically. | |||||||||||||||||||||
| SsystemGeneralEthernetType | 1.3.6.1.4.1.994.3.4.7.1.147 | EthernetType | RW | ||||||||||||||||||
scalar · EthernetType · read-write · current Ethernet duplex type of the device. If changed, the new duplex type will only take effect after a reset. | |||||||||||||||||||||
| SsystemGeneralEthernetRate | 1.3.6.1.4.1.994.3.4.7.1.148 | EthernetRate | RW | ||||||||||||||||||
scalar · EthernetRate · read-write · current Ethernet rate of the device. If changed, the new rate will only take effect after a reset. | |||||||||||||||||||||
| SsystemGeneralContact | 1.3.6.1.4.1.994.3.4.7.1.149 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current SNMP contact information. | |||||||||||||||||||||
| TpTrapTargetTable | 1.3.6.1.4.1.994.3.4.7.2 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of TrapTarget | |||||||||||||||||||||
| RpTrapTargetEntry | 1.3.6.1.4.1.994.3.4.7.2.1 | NA | |||||||||||||||||||
| CpTrapTargetDescription | 1.3.6.1.4.1.994.3.4.7.2.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the trap target. | |||||||||||||||||||||
| CpTrapTargetConfigured | 1.3.6.1.4.1.994.3.4.7.2.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current Determines if traps will be sent to trap target with given IP address. | |||||||||||||||||||||
| CpTrapTargetIpAddress | 1.3.6.1.4.1.994.3.4.7.2.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current SNMP traps are sent to this IP address. | |||||||||||||||||||||
| CpTrapTargetSnmpVersion | 1.3.6.1.4.1.994.3.4.7.2.1.42 | SnmpVersion | RW | ||||||||||||||||||
column · SnmpVersion · read-write · current Indicates the version of SNMP trap to use. | |||||||||||||||||||||
| CpTrapTargetIPPortNum | 1.3.6.1.4.1.994.3.4.7.2.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current SNMP traps are sent to this network port. | |||||||||||||||||||||
| CpTrapTargetBackupIPAddress | 1.3.6.1.4.1.994.3.4.7.2.1.78 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Used only when dialing out as backup. | |||||||||||||||||||||
| CpTrapTargetUseDialout | 1.3.6.1.4.1.994.3.4.7.2.1.125 | UseDialout | RW | ||||||||||||||||||
column · UseDialout · read-write · current Determines if traps will be sent only when dialed out. | |||||||||||||||||||||
| CpTrapTargetDialoutTarget | 1.3.6.1.4.1.994.3.4.7.2.1.126 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Determines which target to dial out to when sending traps. | |||||||||||||||||||||
| CpTrapTargetAuthKey | 1.3.6.1.4.1.994.3.4.7.2.1.140 | DescriptionString | RW | ||||||||||||||||||
| CpTrapTargetPrivKey | 1.3.6.1.4.1.994.3.4.7.2.1.141 | DescriptionString | RW | ||||||||||||||||||
| CpTrapTargetSNMPAccess | 1.3.6.1.4.1.994.3.4.7.2.1.142 | SNMPAccess | RW | ||||||||||||||||||
| CpTrapTargetEngineID | 1.3.6.1.4.1.994.3.4.7.2.1.143 | DescriptionString | RW | ||||||||||||||||||
| CpTrapTargetIndex | 1.3.6.1.4.1.994.3.4.7.2.1.999 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current Index. | |||||||||||||||||||||
| TpEmailTable | 1.3.6.1.4.1.994.3.4.7.3 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Email | |||||||||||||||||||||
| RpEmailEntry | 1.3.6.1.4.1.994.3.4.7.3.1 | NA | |||||||||||||||||||
| CpEmailAddress | 1.3.6.1.4.1.994.3.4.7.3.1.1 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Email events will be sent to this address. | |||||||||||||||||||||
| CpEmailDescription | 1.3.6.1.4.1.994.3.4.7.3.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the Email target. | |||||||||||||||||||||
| CpEmailConfigured | 1.3.6.1.4.1.994.3.4.7.3.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, email events will be sent to given address. If set to false, email will not be sent. | |||||||||||||||||||||
| CpEmailIndex | 1.3.6.1.4.1.994.3.4.7.3.1.999 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current Index. | |||||||||||||||||||||
| TpRemoteSensorTable | 1.3.6.1.4.1.994.3.4.7.5 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of RemoteSensor | |||||||||||||||||||||
| RpRemoteSensorEntry | 1.3.6.1.4.1.994.3.4.7.5.1 | NA | |||||||||||||||||||
| CpRemoteSensorDescription | 1.3.6.1.4.1.994.3.4.7.5.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the Analog device. | |||||||||||||||||||||
| CpRemoteSensorDesc0 | 1.3.6.1.4.1.994.3.4.7.5.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpRemoteSensorDesc1 | 1.3.6.1.4.1.994.3.4.7.5.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpRemoteSensorDesc2 | 1.3.6.1.4.1.994.3.4.7.5.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpRemoteSensorDesc3 | 1.3.6.1.4.1.994.3.4.7.5.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpRemoteSensorDesc4 | 1.3.6.1.4.1.994.3.4.7.5.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpRemoteSensorDesc5 | 1.3.6.1.4.1.994.3.4.7.5.1.9 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description for a communications failure to the remote analog device. | |||||||||||||||||||||
| CpRemoteSensorConfigured | 1.3.6.1.4.1.994.3.4.7.5.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true analog values will be monitored. If set to false no values will be monitored. | |||||||||||||||||||||
| CpRemoteSensorSendEmail | 1.3.6.1.4.1.994.3.4.7.5.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. | |||||||||||||||||||||
| CpRemoteSensorSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.5.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. | |||||||||||||||||||||
| CpRemoteSensorLevel0 | 1.3.6.1.4.1.994.3.4.7.5.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpRemoteSensorLevel1 | 1.3.6.1.4.1.994.3.4.7.5.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpRemoteSensorLevel2 | 1.3.6.1.4.1.994.3.4.7.5.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpRemoteSensorLevel3 | 1.3.6.1.4.1.994.3.4.7.5.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpRemoteSensorLevel4 | 1.3.6.1.4.1.994.3.4.7.5.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpRemoteSensorLevel5 | 1.3.6.1.4.1.994.3.4.7.5.1.22 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Level of a communications failure to the remote analog device. | |||||||||||||||||||||
| CpRemoteSensorThresh0 | 1.3.6.1.4.1.994.3.4.7.5.1.28 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the maximum analog value. | |||||||||||||||||||||
| CpRemoteSensorThresh1 | 1.3.6.1.4.1.994.3.4.7.5.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the first threshold value. | |||||||||||||||||||||
| CpRemoteSensorThresh2 | 1.3.6.1.4.1.994.3.4.7.5.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the second threshold value. | |||||||||||||||||||||
| CpRemoteSensorThresh3 | 1.3.6.1.4.1.994.3.4.7.5.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the third threshold value. | |||||||||||||||||||||
| CpRemoteSensorThresh4 | 1.3.6.1.4.1.994.3.4.7.5.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the fourth threshold value. | |||||||||||||||||||||
| CpRemoteSensorThresh5 | 1.3.6.1.4.1.994.3.4.7.5.1.33 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the minimum threshold value. | |||||||||||||||||||||
| CpRemoteSensorUnits | 1.3.6.1.4.1.994.3.4.7.5.1.46 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the units of measurement. | |||||||||||||||||||||
| CpRemoteSensorPollAddress | 1.3.6.1.4.1.994.3.4.7.5.1.56 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The polling address of the analog device. | |||||||||||||||||||||
| CpRemoteSensorLiveDescription | 1.3.6.1.4.1.994.3.4.7.5.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The description of the current state of the analog device | |||||||||||||||||||||
| CpRemoteSensorLiveLevel | 1.3.6.1.4.1.994.3.4.7.5.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The level of the current state of the analog device. | |||||||||||||||||||||
| CpRemoteSensorLiveRaw | 1.3.6.1.4.1.994.3.4.7.5.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current reading from the analog device. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpRemoteSensorLiveTime | 1.3.6.1.4.1.994.3.4.7.5.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The time of the last event. | |||||||||||||||||||||
| CpRemoteSensorTL1SID | 1.3.6.1.4.1.994.3.4.7.5.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. | |||||||||||||||||||||
| CpRemoteSensorTL1COND | 1.3.6.1.4.1.994.3.4.7.5.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. | |||||||||||||||||||||
| CpRemoteSensorTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.5.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. | |||||||||||||||||||||
| CpRemoteSensorTL1Env | 1.3.6.1.4.1.994.3.4.7.5.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. | |||||||||||||||||||||
| CpRemoteSensorTL1Srveff | 1.3.6.1.4.1.994.3.4.7.5.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. | |||||||||||||||||||||
| CpRemoteSensorTL1Locn | 1.3.6.1.4.1.994.3.4.7.5.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. | |||||||||||||||||||||
| CpRemoteSensorTL1Dirn | 1.3.6.1.4.1.994.3.4.7.5.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. | |||||||||||||||||||||
| CpRemoteSensorMODBUSCommand | 1.3.6.1.4.1.994.3.4.7.5.1.144 | MODBUSCommand | RW | ||||||||||||||||||
column · MODBUSCommand · read-write · current The polling command for the analog device. | |||||||||||||||||||||
| CpRemoteSensorStartRegister | 1.3.6.1.4.1.994.3.4.7.5.1.145 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The MODBUS register for the analog device. | |||||||||||||||||||||
| CpRemoteSensorIndex | 1.3.6.1.4.1.994.3.4.7.5.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpOnboardSensorTable | 1.3.6.1.4.1.994.3.4.7.6 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of OnboardSensor | |||||||||||||||||||||
| RpOnboardSensorEntry | 1.3.6.1.4.1.994.3.4.7.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry for configuration table of OnboardSensor
| |||||||||||||||||||||
| CpOnboardSensorDescription | 1.3.6.1.4.1.994.3.4.7.6.1.3 | DescriptionString | RO | Humidity | |||||||||||||||||
column · DescriptionString · read-only · current Description of the onboard sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorDesc0 | 1.3.6.1.4.1.994.3.4.7.6.1.4 | DescriptionString | RW | High High | |||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorDesc1 | 1.3.6.1.4.1.994.3.4.7.6.1.5 | DescriptionString | RW | High | |||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorDesc2 | 1.3.6.1.4.1.994.3.4.7.6.1.6 | DescriptionString | RW | Medium | |||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 2 and threshold 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorDesc3 | 1.3.6.1.4.1.994.3.4.7.6.1.7 | DescriptionString | RW | Low | |||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 3 and threshold 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorDesc4 | 1.3.6.1.4.1.994.3.4.7.6.1.8 | DescriptionString | RW | Low Low | |||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 4 and threshold 5. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorDesc5 | 1.3.6.1.4.1.994.3.4.7.6.1.9 | DescriptionString | RW | Offline | |||||||||||||||||
column · DescriptionString · read-write · current Description for a communications failure to the sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorConfigured | 1.3.6.1.4.1.994.3.4.7.6.1.10 | Configured | RW | 0 | |||||||||||||||||
column · Configured · read-write · current If set to true, the sensor input will be usable. If set to false the sensor input will be ignored. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorSendEmail | 1.3.6.1.4.1.994.3.4.7.6.1.11 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.6.1.12 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLevel0 | 1.3.6.1.4.1.994.3.4.7.6.1.17 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current The level for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLevel1 | 1.3.6.1.4.1.994.3.4.7.6.1.18 | Level | RW | 3 | |||||||||||||||||
column · Level · read-write · current The level for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLevel2 | 1.3.6.1.4.1.994.3.4.7.6.1.19 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current The level for values between threshold 2 and threshold 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLevel3 | 1.3.6.1.4.1.994.3.4.7.6.1.20 | Level | RW | 3 | |||||||||||||||||
column · Level · read-write · current The level for values between threshold 3 and threshold 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLevel4 | 1.3.6.1.4.1.994.3.4.7.6.1.21 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current The level for values between threshold 4 and threshold 5. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLevel5 | 1.3.6.1.4.1.994.3.4.7.6.1.22 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current Level of a communications failure to the sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorThresh0 | 1.3.6.1.4.1.994.3.4.7.6.1.28 | DescriptionString | RO | 100 | |||||||||||||||||
column · DescriptionString · read-only · current This is the minimun analog value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorThresh1 | 1.3.6.1.4.1.994.3.4.7.6.1.29 | DescriptionString | RW | 80.0 | |||||||||||||||||
column · DescriptionString · read-write · current This is the first threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorThresh2 | 1.3.6.1.4.1.994.3.4.7.6.1.30 | DescriptionString | RW | 50.0 | |||||||||||||||||
column · DescriptionString · read-write · current This is the second threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorThresh3 | 1.3.6.1.4.1.994.3.4.7.6.1.31 | DescriptionString | RW | 25.0 | |||||||||||||||||
column · DescriptionString · read-write · current This is the third threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorThresh4 | 1.3.6.1.4.1.994.3.4.7.6.1.32 | DescriptionString | RW | 20.0 | |||||||||||||||||
column · DescriptionString · read-write · current This is the fourth threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorThresh5 | 1.3.6.1.4.1.994.3.4.7.6.1.33 | DescriptionString | RO | 0 | |||||||||||||||||
column · DescriptionString · read-only · current This is the maximum threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorUnits | 1.3.6.1.4.1.994.3.4.7.6.1.46 | DescriptionString | RO | % | |||||||||||||||||
column · DescriptionString · read-only · current Description of the units of measurement. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLiveDescription | 1.3.6.1.4.1.994.3.4.7.6.1.64 | DescriptionString | RO | Low Low | |||||||||||||||||
column · DescriptionString · read-only · current The description of the current state of the onboard sensor Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLiveLevel | 1.3.6.1.4.1.994.3.4.7.6.1.65 | DescriptionString | RO | Critical | |||||||||||||||||
column · DescriptionString · read-only · current The level of the current state of the onboard sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLiveRaw | 1.3.6.1.4.1.994.3.4.7.6.1.66 | DescriptionString | RO | 15.4 | |||||||||||||||||
column · DescriptionString · read-only · current The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorLiveTime | 1.3.6.1.4.1.994.3.4.7.6.1.67 | DescriptionString | RO | 15-Mar-2019 06:07:07 | |||||||||||||||||
column · DescriptionString · read-only · current The time of the last event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1SID | 1.3.6.1.4.1.994.3.4.7.6.1.116 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1COND | 1.3.6.1.4.1.994.3.4.7.6.1.117 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.6.1.118 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1Env | 1.3.6.1.4.1.994.3.4.7.6.1.119 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1Srveff | 1.3.6.1.4.1.994.3.4.7.6.1.120 | TL1Srveff | RW | 0 | |||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1Locn | 1.3.6.1.4.1.994.3.4.7.6.1.121 | TL1Locn | RW | 0 | |||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorTL1Dirn | 1.3.6.1.4.1.994.3.4.7.6.1.122 | TL1Dirn | RW | 0 | |||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorSensorType | 1.3.6.1.4.1.994.3.4.7.6.1.131 | SensorType | RO | 2 | |||||||||||||||||
column · SensorType · read-only · current The type of sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpOnboardSensorIndex | 1.3.6.1.4.1.994.3.4.7.6.1.999 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current Index. | |||||||||||||||||||||
| TpNetDevicesTable | 1.3.6.1.4.1.994.3.4.7.7 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of NetDevices | |||||||||||||||||||||
| RpNetDevicesEntry | 1.3.6.1.4.1.994.3.4.7.7.1 | NA | |||||||||||||||||||
| CpNetDevicesDescription | 1.3.6.1.4.1.994.3.4.7.7.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the network device. | |||||||||||||||||||||
| CpNetDevicesDesc0 | 1.3.6.1.4.1.994.3.4.7.7.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Text description of online state. | |||||||||||||||||||||
| CpNetDevicesDesc1 | 1.3.6.1.4.1.994.3.4.7.7.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Text description of offline state. | |||||||||||||||||||||
| CpNetDevicesConfigured | 1.3.6.1.4.1.994.3.4.7.7.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, net device will be pinged, If set to false, no action will be taken. | |||||||||||||||||||||
| CpNetDevicesSendEmail | 1.3.6.1.4.1.994.3.4.7.7.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true, an email will be sent when a change of state is detected. If set to false, no email will be sent. | |||||||||||||||||||||
| CpNetDevicesSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.7.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true, an SNMP trap will be sent when a change of state is detected. If set to false, no SNMP trap will be sent. | |||||||||||||||||||||
| CpNetDevicesIpAddress | 1.3.6.1.4.1.994.3.4.7.7.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of the net device to ping. | |||||||||||||||||||||
| CpNetDevicesLevel0 | 1.3.6.1.4.1.994.3.4.7.7.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with the online state. | |||||||||||||||||||||
| CpNetDevicesLevel1 | 1.3.6.1.4.1.994.3.4.7.7.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with the offline state. | |||||||||||||||||||||
| CpNetDevicesLiveDescription | 1.3.6.1.4.1.994.3.4.7.7.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The description of the current state of the net device | |||||||||||||||||||||
| CpNetDevicesLiveLevel | 1.3.6.1.4.1.994.3.4.7.7.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The level of the current state of the net device. | |||||||||||||||||||||
| CpNetDevicesLiveRaw | 1.3.6.1.4.1.994.3.4.7.7.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current reading from the net device. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpNetDevicesLiveTime | 1.3.6.1.4.1.994.3.4.7.7.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The time of the last event. | |||||||||||||||||||||
| CpNetDevicesTL1SID | 1.3.6.1.4.1.994.3.4.7.7.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. | |||||||||||||||||||||
| CpNetDevicesTL1COND | 1.3.6.1.4.1.994.3.4.7.7.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. | |||||||||||||||||||||
| CpNetDevicesTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.7.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. | |||||||||||||||||||||
| CpNetDevicesTL1Env | 1.3.6.1.4.1.994.3.4.7.7.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. | |||||||||||||||||||||
| CpNetDevicesTL1Srveff | 1.3.6.1.4.1.994.3.4.7.7.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. | |||||||||||||||||||||
| CpNetDevicesTL1Locn | 1.3.6.1.4.1.994.3.4.7.7.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. | |||||||||||||||||||||
| CpNetDevicesTL1Dirn | 1.3.6.1.4.1.994.3.4.7.7.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. | |||||||||||||||||||||
| CpNetDevicesIndex | 1.3.6.1.4.1.994.3.4.7.7.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpAccountsTable | 1.3.6.1.4.1.994.3.4.7.9 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Accounts | |||||||||||||||||||||
| RpAccountsEntry | 1.3.6.1.4.1.994.3.4.7.9.1 | NA | |||||||||||||||||||
| CpAccountsConfigured | 1.3.6.1.4.1.994.3.4.7.9.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this account can be used to login. | |||||||||||||||||||||
| CpAccountsName | 1.3.6.1.4.1.994.3.4.7.9.1.25 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Name associated with this account. | |||||||||||||||||||||
| CpAccountsEncPassword | 1.3.6.1.4.1.994.3.4.7.9.1.27 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Password for this account. When reading, an encrypted version of password will be displayed. When writing, use plain text. | |||||||||||||||||||||
| CpAccountsUserLevel | 1.3.6.1.4.1.994.3.4.7.9.1.55 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current The user level for this account. One of the following masks from each group are used: No FTP access 0x0000 0 FTP read-only 0x0001 1 FTP Full access 0x0003 3 No Web access 0x0000 0 Monitor 0x0010 16 Config 0x0030 48 Config + Accounts 0x00B0 176 The masks are added together to create a permission value. | |||||||||||||||||||||
| CpAccountsUnsecured | 1.3.6.1.4.1.994.3.4.7.9.1.77 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current Allow secured configuration for SNMP through this account. | |||||||||||||||||||||
| CpAccountsAuthKey | 1.3.6.1.4.1.994.3.4.7.9.1.140 | DescriptionString | RW | ||||||||||||||||||
| CpAccountsPrivKey | 1.3.6.1.4.1.994.3.4.7.9.1.141 | DescriptionString | RW | ||||||||||||||||||
| CpAccountsSNMPAccess | 1.3.6.1.4.1.994.3.4.7.9.1.142 | SNMPAccess | RW | ||||||||||||||||||
| CpAccountsIndex | 1.3.6.1.4.1.994.3.4.7.9.1.999 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current Index. | |||||||||||||||||||||
| Ncamera | 1.3.6.1.4.1.994.3.4.7.10 | ||||||||||||||||||||
| ScameraConfigured | 1.3.6.1.4.1.994.3.4.7.10.10 | Configured | RW | ||||||||||||||||||
scalar · Configured · read-write · current If set to true, camera view will be used in main webpage. If set to false, camera view will not be used. | |||||||||||||||||||||
| ScameraIpAddress | 1.3.6.1.4.1.994.3.4.7.10.14 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current IP address of the camera. | |||||||||||||||||||||
| ScameraCameraStyle | 1.3.6.1.4.1.994.3.4.7.10.43 | CameraStyle | RW | ||||||||||||||||||
scalar · CameraStyle · read-write · current Type of camera used. | |||||||||||||||||||||
| NsnmpGeneral | 1.3.6.1.4.1.994.3.4.7.12 | ||||||||||||||||||||
| SsnmpGeneralConfigured | 1.3.6.1.4.1.994.3.4.7.12.10 | Configured | RW | ||||||||||||||||||
scalar · Configured · read-write · current Resend standing alarms at a given interval | |||||||||||||||||||||
| SsnmpGeneralReadPeriod | 1.3.6.1.4.1.994.3.4.7.12.23 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Period in minutes between resend of standing alarms | |||||||||||||||||||||
| SsnmpGeneralGet | 1.3.6.1.4.1.994.3.4.7.12.39 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Get community name for SNMP. | |||||||||||||||||||||
| SsnmpGeneralSet | 1.3.6.1.4.1.994.3.4.7.12.40 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Set community name for SNMP. | |||||||||||||||||||||
| SsnmpGeneralTrap | 1.3.6.1.4.1.994.3.4.7.12.41 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Trap community name for SNMP. | |||||||||||||||||||||
| SsnmpGeneralIPPortNum | 1.3.6.1.4.1.994.3.4.7.12.73 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current SNMP configuration is done on this network port. | |||||||||||||||||||||
| SsnmpGeneralEngineID | 1.3.6.1.4.1.994.3.4.7.12.143 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current SNMP v3 engine ID | |||||||||||||||||||||
| NemailGeneral | 1.3.6.1.4.1.994.3.4.7.13 | ||||||||||||||||||||
| SemailGeneralAddress | 1.3.6.1.4.1.994.3.4.7.13.1 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Login name to use if logging into email server is true. | |||||||||||||||||||||
| SemailGeneralConfigured | 1.3.6.1.4.1.994.3.4.7.13.10 | Configured | RW | ||||||||||||||||||
scalar · Configured · read-write · current If set to true, the device will log onto the email server before sending and email event. If set to false, the device will not log onto email server. | |||||||||||||||||||||
| SemailGeneralIpAddress | 1.3.6.1.4.1.994.3.4.7.13.14 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current IP address of email server. | |||||||||||||||||||||
| SemailGeneralPassword | 1.3.6.1.4.1.994.3.4.7.13.26 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Password to use if logging into email server is true. | |||||||||||||||||||||
| SemailGeneralIPPortNum | 1.3.6.1.4.1.994.3.4.7.13.73 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Port number address of email server. | |||||||||||||||||||||
| TpSerialTable | 1.3.6.1.4.1.994.3.4.7.14 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Serial | |||||||||||||||||||||
| RpSerialEntry | 1.3.6.1.4.1.994.3.4.7.14.1 | NA | |||||||||||||||||||
| CpSerialDescription | 1.3.6.1.4.1.994.3.4.7.14.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the serial port. | |||||||||||||||||||||
| CpSerialConfigured | 1.3.6.1.4.1.994.3.4.7.14.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this serial port will be usable. If set to false the port will not be usable. | |||||||||||||||||||||
| CpSerialIpAddress | 1.3.6.1.4.1.994.3.4.7.14.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current IP Address of the target device. | |||||||||||||||||||||
| CpSerialReadPeriod | 1.3.6.1.4.1.994.3.4.7.14.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpSerialBaudRate | 1.3.6.1.4.1.994.3.4.7.14.1.57 | BaudRate | RW | ||||||||||||||||||
column · BaudRate · read-write · current Baud rate of the serial port. | |||||||||||||||||||||
| CpSerialDataBits | 1.3.6.1.4.1.994.3.4.7.14.1.58 | DataBits | RW | ||||||||||||||||||
column · DataBits · read-write · current Number of data bit for the serial port. | |||||||||||||||||||||
| CpSerialParity | 1.3.6.1.4.1.994.3.4.7.14.1.59 | Parity | RW | ||||||||||||||||||
column · Parity · read-write · current Parity of the serial port. | |||||||||||||||||||||
| CpSerialStopBits | 1.3.6.1.4.1.994.3.4.7.14.1.60 | StopBits | RW | ||||||||||||||||||
column · StopBits · read-write · current Number of stop bits for the serial port. | |||||||||||||||||||||
| CpSerialProtocol | 1.3.6.1.4.1.994.3.4.7.14.1.61 | Protocol | RW | ||||||||||||||||||
column · Protocol · read-write · current Protocol the serial port is speaking. | |||||||||||||||||||||
| CpSerialSerialRTS | 1.3.6.1.4.1.994.3.4.7.14.1.62 | SerialRTS | RW | ||||||||||||||||||
column · SerialRTS · read-write · current Request To Send (RTS) setting for the serial port. | |||||||||||||||||||||
| CpSerialSerialCTS | 1.3.6.1.4.1.994.3.4.7.14.1.63 | SerialCTS | RW | ||||||||||||||||||
column · SerialCTS · read-write · current Clear To Send (CTS) setting for the serial port. | |||||||||||||||||||||
| CpSerialPresent | 1.3.6.1.4.1.994.3.4.7.14.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current If set to true, the serial port exists. If set to false the serial port does not exist. | |||||||||||||||||||||
| CpSerialIPPortNum | 1.3.6.1.4.1.994.3.4.7.14.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current IP port number of the target device. | |||||||||||||||||||||
| CpSerialPortType | 1.3.6.1.4.1.994.3.4.7.14.1.76 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current The type of serial port. | |||||||||||||||||||||
| CpSerialIndex | 1.3.6.1.4.1.994.3.4.7.14.1.999 | Integer32 (1..5) | RO | ||||||||||||||||||
column · Integer32 (1..5) · read-only · current Index. | |||||||||||||||||||||
| TpSelfTestTable | 1.3.6.1.4.1.994.3.4.7.15 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of SelfTest | |||||||||||||||||||||
| RpSelfTestEntry | 1.3.6.1.4.1.994.3.4.7.15.1 | NA | |||||||||||||||||||
| CpSelfTestDescription | 1.3.6.1.4.1.994.3.4.7.15.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the Power On Self Test (POST). | |||||||||||||||||||||
| CpSelfTestConfigured | 1.3.6.1.4.1.994.3.4.7.15.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this POST has passed. If set to false, it has failed. | |||||||||||||||||||||
| CpSelfTestIndex | 1.3.6.1.4.1.994.3.4.7.15.1.999 | Integer32 (1..7) | RO | ||||||||||||||||||
column · Integer32 (1..7) · read-only · current Index. | |||||||||||||||||||||
| TpInternalFaultsTable | 1.3.6.1.4.1.994.3.4.7.16 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of InternalFaults | |||||||||||||||||||||
| RpInternalFaultsEntry | 1.3.6.1.4.1.994.3.4.7.16.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry for configuration table of InternalFaults
| |||||||||||||||||||||
| CpInternalFaultsDescription | 1.3.6.1.4.1.994.3.4.7.16.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the internal fault. | |||||||||||||||||||||
| CpInternalFaultsDesc0 | 1.3.6.1.4.1.994.3.4.7.16.1.4 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Text description of the healthy state. | |||||||||||||||||||||
| CpInternalFaultsDesc1 | 1.3.6.1.4.1.994.3.4.7.16.1.5 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Text description of a non-normal state. | |||||||||||||||||||||
| CpInternalFaultsDesc2 | 1.3.6.1.4.1.994.3.4.7.16.1.6 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Text description of a non-normal state. | |||||||||||||||||||||
| CpInternalFaultsDesc3 | 1.3.6.1.4.1.994.3.4.7.16.1.7 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Text description of a non-normal state. | |||||||||||||||||||||
| CpInternalFaultsSendEmail | 1.3.6.1.4.1.994.3.4.7.16.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true an email event will be set when a change occurs. If set to false no email event will be sent. | |||||||||||||||||||||
| CpInternalFaultsSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.16.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true an SNMP trap will be set when a change occurs. If set to false no SNMP trap will be sent. | |||||||||||||||||||||
| CpInternalFaultsLevel0 | 1.3.6.1.4.1.994.3.4.7.16.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with the healthy state. | |||||||||||||||||||||
| CpInternalFaultsLevel1 | 1.3.6.1.4.1.994.3.4.7.16.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with this non-normal state. | |||||||||||||||||||||
| CpInternalFaultsLevel2 | 1.3.6.1.4.1.994.3.4.7.16.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with this non-normal state. | |||||||||||||||||||||
| CpInternalFaultsLevel3 | 1.3.6.1.4.1.994.3.4.7.16.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with this non-normal state. | |||||||||||||||||||||
| CpInternalFaultsReadPeriod | 1.3.6.1.4.1.994.3.4.7.16.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Dwell time required in milliseconds. | |||||||||||||||||||||
| CpInternalFaultsIgnoreOff | 1.3.6.1.4.1.994.3.4.7.16.1.50 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If true, no event is generated for a change to the healty state. | |||||||||||||||||||||
| CpInternalFaultsLiveDescription | 1.3.6.1.4.1.994.3.4.7.16.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current condition of the internal fault. | |||||||||||||||||||||
| CpInternalFaultsLiveLevel | 1.3.6.1.4.1.994.3.4.7.16.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current level of the internal fault. | |||||||||||||||||||||
| CpInternalFaultsLiveTime | 1.3.6.1.4.1.994.3.4.7.16.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The time of the fault event. | |||||||||||||||||||||
| CpInternalFaultsUseResetTime | 1.3.6.1.4.1.994.3.4.7.16.1.98 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current When true the configured dwell time is used internally. | |||||||||||||||||||||
| CpInternalFaultsIndex | 1.3.6.1.4.1.994.3.4.7.16.1.999 | Integer32 (1..11) | RO | ||||||||||||||||||
column · Integer32 (1..11) · read-only · current Index. | |||||||||||||||||||||
| TpSlotInfoTable | 1.3.6.1.4.1.994.3.4.7.17 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of SlotInfo | |||||||||||||||||||||
| RpSlotInfoEntry | 1.3.6.1.4.1.994.3.4.7.17.1 | NA | |||||||||||||||||||
| CpSlotInfoDescription | 1.3.6.1.4.1.994.3.4.7.17.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the slot contents. | |||||||||||||||||||||
| CpSlotInfoRecord | 1.3.6.1.4.1.994.3.4.7.17.1.35 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of records for this slot. | |||||||||||||||||||||
| CpSlotInfoPresent | 1.3.6.1.4.1.994.3.4.7.17.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current If true indicates a card is in the slot. If false indicates that no card is present in the slot. | |||||||||||||||||||||
| CpSlotInfoSlotId | 1.3.6.1.4.1.994.3.4.7.17.1.69 | SlotId | RO | ||||||||||||||||||
column · SlotId · read-only · current Identifies the type of card in slot. | |||||||||||||||||||||
| CpSlotInfoIndex | 1.3.6.1.4.1.994.3.4.7.17.1.999 | Integer32 (1..6) | RO | ||||||||||||||||||
column · Integer32 (1..6) · read-only · current Index. | |||||||||||||||||||||
| TpSlot1Table | 1.3.6.1.4.1.994.3.4.7.18 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Slot1 | |||||||||||||||||||||
| RpSlot1Entry | 1.3.6.1.4.1.994.3.4.7.18.1 | NA | |||||||||||||||||||
| CpSlot1Description | 1.3.6.1.4.1.994.3.4.7.18.1.3 | DescriptionString | RW | Humidity | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Desc0 | 1.3.6.1.4.1.994.3.4.7.18.1.4 | DescriptionString | RW | High High | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Desc1 | 1.3.6.1.4.1.994.3.4.7.18.1.5 | DescriptionString | RW | High | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Desc2 | 1.3.6.1.4.1.994.3.4.7.18.1.6 | DescriptionString | RW | Medium | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Desc3 | 1.3.6.1.4.1.994.3.4.7.18.1.7 | DescriptionString | RW | Low | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Desc4 | 1.3.6.1.4.1.994.3.4.7.18.1.8 | DescriptionString | RW | Low Low | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Desc5 | 1.3.6.1.4.1.994.3.4.7.18.1.9 | DescriptionString | RW | Offline | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Configured | 1.3.6.1.4.1.994.3.4.7.18.1.10 | Configured | RW | 1 | |||||||||||||||||
column · Configured · read-write · current This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1SendEmail | 1.3.6.1.4.1.994.3.4.7.18.1.11 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1SendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.18.1.12 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1IpAddress | 1.3.6.1.4.1.994.3.4.7.18.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This field is used in the following card types: serial-ports - IP Address of the target device. | |||||||||||||||||||||
| CpSlot1Level0 | 1.3.6.1.4.1.994.3.4.7.18.1.17 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Level1 | 1.3.6.1.4.1.994.3.4.7.18.1.18 | Level | RW | 3 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Level2 | 1.3.6.1.4.1.994.3.4.7.18.1.19 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Level3 | 1.3.6.1.4.1.994.3.4.7.18.1.20 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Level4 | 1.3.6.1.4.1.994.3.4.7.18.1.21 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Level5 | 1.3.6.1.4.1.994.3.4.7.18.1.22 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1ReadPeriod | 1.3.6.1.4.1.994.3.4.7.18.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpSlot1Thresh0 | 1.3.6.1.4.1.994.3.4.7.18.1.28 | DescriptionString | RO | 100 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Thresh1 | 1.3.6.1.4.1.994.3.4.7.18.1.29 | DescriptionString | RW | 75.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Thresh2 | 1.3.6.1.4.1.994.3.4.7.18.1.30 | DescriptionString | RW | 65.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Thresh3 | 1.3.6.1.4.1.994.3.4.7.18.1.31 | DescriptionString | RW | 10.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Thresh4 | 1.3.6.1.4.1.994.3.4.7.18.1.32 | DescriptionString | RW | 5.00 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Thresh5 | 1.3.6.1.4.1.994.3.4.7.18.1.33 | DescriptionString | RO | 0 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1ContactStyle | 1.3.6.1.4.1.994.3.4.7.18.1.44 | ContactStyle | RW | ||||||||||||||||||
column · ContactStyle · read-write · current This field is used in the following card types: discrete-inputs - Determines the type of contact. | |||||||||||||||||||||
| CpSlot1Units | 1.3.6.1.4.1.994.3.4.7.18.1.46 | DescriptionString | RO | % | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1OutputMode | 1.3.6.1.4.1.994.3.4.7.18.1.47 | OutputMode | RW | ||||||||||||||||||
column · OutputMode · read-write · current This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated. | |||||||||||||||||||||
| CpSlot1OutputState | 1.3.6.1.4.1.994.3.4.7.18.1.48 | OutputState | RW | ||||||||||||||||||
column · OutputState · read-write · current This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point. | |||||||||||||||||||||
| CpSlot1OutputAuto | 1.3.6.1.4.1.994.3.4.7.18.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state. | |||||||||||||||||||||
| CpSlot1BaudRate | 1.3.6.1.4.1.994.3.4.7.18.1.57 | BaudRate | RW | ||||||||||||||||||
column · BaudRate · read-write · current This field is used in the following card types: serial-ports - Baud rate of the serial port. | |||||||||||||||||||||
| CpSlot1DataBits | 1.3.6.1.4.1.994.3.4.7.18.1.58 | DataBits | RW | ||||||||||||||||||
column · DataBits · read-write · current This field is used in the following card types: serial-ports - Number of data bit for the serial port. | |||||||||||||||||||||
| CpSlot1Parity | 1.3.6.1.4.1.994.3.4.7.18.1.59 | Parity | RW | ||||||||||||||||||
column · Parity · read-write · current This field is used in the following card types: serial-ports - Parity of the serial port. | |||||||||||||||||||||
| CpSlot1StopBits | 1.3.6.1.4.1.994.3.4.7.18.1.60 | StopBits | RW | ||||||||||||||||||
column · StopBits · read-write · current This field is used in the following card types: serial-ports - Number of stop bits for the serial port. | |||||||||||||||||||||
| CpSlot1Protocol | 1.3.6.1.4.1.994.3.4.7.18.1.61 | Protocol | RW | ||||||||||||||||||
column · Protocol · read-write · current This field is used in the following card types: serial-ports - Protocol the serial port is speaking. | |||||||||||||||||||||
| CpSlot1SerialRTS | 1.3.6.1.4.1.994.3.4.7.18.1.62 | SerialRTS | RW | ||||||||||||||||||
column · SerialRTS · read-write · current This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot1SerialCTS | 1.3.6.1.4.1.994.3.4.7.18.1.63 | SerialCTS | RW | ||||||||||||||||||
column · SerialCTS · read-write · current This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot1LiveDescription | 1.3.6.1.4.1.994.3.4.7.18.1.64 | DescriptionString | RO | Low | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1LiveLevel | 1.3.6.1.4.1.994.3.4.7.18.1.65 | DescriptionString | RO | Normal | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1LiveRaw | 1.3.6.1.4.1.994.3.4.7.18.1.66 | DescriptionString | RO | 8.47 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1LiveTime | 1.3.6.1.4.1.994.3.4.7.18.1.67 | DescriptionString | RO | 19-Dec-2018 15:18:32 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Present | 1.3.6.1.4.1.994.3.4.7.18.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist. | |||||||||||||||||||||
| CpSlot1OutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.18.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located. | |||||||||||||||||||||
| CpSlot1VoltageRange | 1.3.6.1.4.1.994.3.4.7.18.1.72 | VoltageRange | RO | 0 | |||||||||||||||||
column · VoltageRange · read-only · current This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1IPPortNum | 1.3.6.1.4.1.994.3.4.7.18.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - IP port number of the target device. | |||||||||||||||||||||
| CpSlot1IOFormat | 1.3.6.1.4.1.994.3.4.7.18.1.75 | IOFormat | RO | 8 | |||||||||||||||||
column · IOFormat · read-only · current This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1PortType | 1.3.6.1.4.1.994.3.4.7.18.1.76 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current This field is used in the following card types: serial-ports - The type of serial port. | |||||||||||||||||||||
| CpSlot1TL1SID | 1.3.6.1.4.1.994.3.4.7.18.1.116 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1TL1COND | 1.3.6.1.4.1.994.3.4.7.18.1.117 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1TL1Eqpt | 1.3.6.1.4.1.994.3.4.7.18.1.118 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1TL1Env | 1.3.6.1.4.1.994.3.4.7.18.1.119 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1TL1Srveff | 1.3.6.1.4.1.994.3.4.7.18.1.120 | TL1Srveff | RW | 0 | |||||||||||||||||
column · TL1Srveff · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1TL1Locn | 1.3.6.1.4.1.994.3.4.7.18.1.121 | TL1Locn | RW | 0 | |||||||||||||||||
column · TL1Locn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1TL1Dirn | 1.3.6.1.4.1.994.3.4.7.18.1.122 | TL1Dirn | RW | 0 | |||||||||||||||||
column · TL1Dirn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1SensorType | 1.3.6.1.4.1.994.3.4.7.18.1.131 | SensorType | RO | 2 | |||||||||||||||||
column · SensorType · read-only · current This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot1Index | 1.3.6.1.4.1.994.3.4.7.18.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpSlot2Table | 1.3.6.1.4.1.994.3.4.7.19 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Slot2 | |||||||||||||||||||||
| RpSlot2Entry | 1.3.6.1.4.1.994.3.4.7.19.1 | NA | |||||||||||||||||||
| CpSlot2Description | 1.3.6.1.4.1.994.3.4.7.19.1.3 | DescriptionString | RW | CO_Door | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Desc0 | 1.3.6.1.4.1.994.3.4.7.19.1.4 | DescriptionString | RW | Door_Open | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Desc1 | 1.3.6.1.4.1.994.3.4.7.19.1.5 | DescriptionString | RW | Door_Closed | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Desc2 | 1.3.6.1.4.1.994.3.4.7.19.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot2Desc3 | 1.3.6.1.4.1.994.3.4.7.19.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot2Desc4 | 1.3.6.1.4.1.994.3.4.7.19.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot2Desc5 | 1.3.6.1.4.1.994.3.4.7.19.1.9 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot2Configured | 1.3.6.1.4.1.994.3.4.7.19.1.10 | Configured | RW | 1 | |||||||||||||||||
column · Configured · read-write · current This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2SendEmail | 1.3.6.1.4.1.994.3.4.7.19.1.11 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2SendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.19.1.12 | Boolean | RW | 1 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2IpAddress | 1.3.6.1.4.1.994.3.4.7.19.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This field is used in the following card types: serial-ports - IP Address of the target device. | |||||||||||||||||||||
| CpSlot2Level0 | 1.3.6.1.4.1.994.3.4.7.19.1.17 | Level | RW | 3 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Level1 | 1.3.6.1.4.1.994.3.4.7.19.1.18 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Level2 | 1.3.6.1.4.1.994.3.4.7.19.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot2Level3 | 1.3.6.1.4.1.994.3.4.7.19.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot2Level4 | 1.3.6.1.4.1.994.3.4.7.19.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot2Level5 | 1.3.6.1.4.1.994.3.4.7.19.1.22 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot2ReadPeriod | 1.3.6.1.4.1.994.3.4.7.19.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpSlot2Thresh0 | 1.3.6.1.4.1.994.3.4.7.19.1.28 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value. | |||||||||||||||||||||
| CpSlot2Thresh1 | 1.3.6.1.4.1.994.3.4.7.19.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value. | |||||||||||||||||||||
| CpSlot2Thresh2 | 1.3.6.1.4.1.994.3.4.7.19.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value. | |||||||||||||||||||||
| CpSlot2Thresh3 | 1.3.6.1.4.1.994.3.4.7.19.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value. | |||||||||||||||||||||
| CpSlot2Thresh4 | 1.3.6.1.4.1.994.3.4.7.19.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value. | |||||||||||||||||||||
| CpSlot2Thresh5 | 1.3.6.1.4.1.994.3.4.7.19.1.33 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value. | |||||||||||||||||||||
| CpSlot2ContactStyle | 1.3.6.1.4.1.994.3.4.7.19.1.44 | ContactStyle | RW | 0 | |||||||||||||||||
column · ContactStyle · read-write · current This field is used in the following card types: discrete-inputs - Determines the type of contact. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Units | 1.3.6.1.4.1.994.3.4.7.19.1.46 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement. | |||||||||||||||||||||
| CpSlot2OutputMode | 1.3.6.1.4.1.994.3.4.7.19.1.47 | OutputMode | RW | ||||||||||||||||||
column · OutputMode · read-write · current This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated. | |||||||||||||||||||||
| CpSlot2OutputState | 1.3.6.1.4.1.994.3.4.7.19.1.48 | OutputState | RW | ||||||||||||||||||
column · OutputState · read-write · current This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point. | |||||||||||||||||||||
| CpSlot2OutputAuto | 1.3.6.1.4.1.994.3.4.7.19.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state. | |||||||||||||||||||||
| CpSlot2BaudRate | 1.3.6.1.4.1.994.3.4.7.19.1.57 | BaudRate | RW | ||||||||||||||||||
column · BaudRate · read-write · current This field is used in the following card types: serial-ports - Baud rate of the serial port. | |||||||||||||||||||||
| CpSlot2DataBits | 1.3.6.1.4.1.994.3.4.7.19.1.58 | DataBits | RW | ||||||||||||||||||
column · DataBits · read-write · current This field is used in the following card types: serial-ports - Number of data bit for the serial port. | |||||||||||||||||||||
| CpSlot2Parity | 1.3.6.1.4.1.994.3.4.7.19.1.59 | Parity | RW | ||||||||||||||||||
column · Parity · read-write · current This field is used in the following card types: serial-ports - Parity of the serial port. | |||||||||||||||||||||
| CpSlot2StopBits | 1.3.6.1.4.1.994.3.4.7.19.1.60 | StopBits | RW | ||||||||||||||||||
column · StopBits · read-write · current This field is used in the following card types: serial-ports - Number of stop bits for the serial port. | |||||||||||||||||||||
| CpSlot2Protocol | 1.3.6.1.4.1.994.3.4.7.19.1.61 | Protocol | RW | ||||||||||||||||||
column · Protocol · read-write · current This field is used in the following card types: serial-ports - Protocol the serial port is speaking. | |||||||||||||||||||||
| CpSlot2SerialRTS | 1.3.6.1.4.1.994.3.4.7.19.1.62 | SerialRTS | RW | ||||||||||||||||||
column · SerialRTS · read-write · current This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot2SerialCTS | 1.3.6.1.4.1.994.3.4.7.19.1.63 | SerialCTS | RW | ||||||||||||||||||
column · SerialCTS · read-write · current This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot2LiveDescription | 1.3.6.1.4.1.994.3.4.7.19.1.64 | DescriptionString | RO | Door_Closed | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2LiveLevel | 1.3.6.1.4.1.994.3.4.7.19.1.65 | DescriptionString | RO | Normal | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2LiveRaw | 1.3.6.1.4.1.994.3.4.7.19.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpSlot2LiveTime | 1.3.6.1.4.1.994.3.4.7.19.1.67 | DescriptionString | RO | 13-Mar-2019 15:05:43 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2Present | 1.3.6.1.4.1.994.3.4.7.19.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist. | |||||||||||||||||||||
| CpSlot2OutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.19.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located. | |||||||||||||||||||||
| CpSlot2VoltageRange | 1.3.6.1.4.1.994.3.4.7.19.1.72 | VoltageRange | RO | ||||||||||||||||||
column · VoltageRange · read-only · current This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range. | |||||||||||||||||||||
| CpSlot2IPPortNum | 1.3.6.1.4.1.994.3.4.7.19.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - IP port number of the target device. | |||||||||||||||||||||
| CpSlot2IOFormat | 1.3.6.1.4.1.994.3.4.7.19.1.75 | IOFormat | RO | 2 | |||||||||||||||||
column · IOFormat · read-only · current This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2PortType | 1.3.6.1.4.1.994.3.4.7.19.1.76 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current This field is used in the following card types: serial-ports - The type of serial port. | |||||||||||||||||||||
| CpSlot2TL1SID | 1.3.6.1.4.1.994.3.4.7.19.1.116 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2TL1COND | 1.3.6.1.4.1.994.3.4.7.19.1.117 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2TL1Eqpt | 1.3.6.1.4.1.994.3.4.7.19.1.118 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2TL1Env | 1.3.6.1.4.1.994.3.4.7.19.1.119 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2TL1Srveff | 1.3.6.1.4.1.994.3.4.7.19.1.120 | TL1Srveff | RW | 0 | |||||||||||||||||
column · TL1Srveff · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2TL1Locn | 1.3.6.1.4.1.994.3.4.7.19.1.121 | TL1Locn | RW | 0 | |||||||||||||||||
column · TL1Locn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2TL1Dirn | 1.3.6.1.4.1.994.3.4.7.19.1.122 | TL1Dirn | RW | 0 | |||||||||||||||||
column · TL1Dirn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot2SensorType | 1.3.6.1.4.1.994.3.4.7.19.1.131 | SensorType | RO | ||||||||||||||||||
column · SensorType · read-only · current This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor. | |||||||||||||||||||||
| CpSlot2Index | 1.3.6.1.4.1.994.3.4.7.19.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpSlot3Table | 1.3.6.1.4.1.994.3.4.7.20 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Slot3 | |||||||||||||||||||||
| RpSlot3Entry | 1.3.6.1.4.1.994.3.4.7.20.1 | NA | |||||||||||||||||||
| CpSlot3Description | 1.3.6.1.4.1.994.3.4.7.20.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device. | |||||||||||||||||||||
| CpSlot3Desc0 | 1.3.6.1.4.1.994.3.4.7.20.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpSlot3Desc1 | 1.3.6.1.4.1.994.3.4.7.20.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpSlot3Desc2 | 1.3.6.1.4.1.994.3.4.7.20.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot3Desc3 | 1.3.6.1.4.1.994.3.4.7.20.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot3Desc4 | 1.3.6.1.4.1.994.3.4.7.20.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot3Desc5 | 1.3.6.1.4.1.994.3.4.7.20.1.9 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot3Configured | 1.3.6.1.4.1.994.3.4.7.20.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored. | |||||||||||||||||||||
| CpSlot3SendEmail | 1.3.6.1.4.1.994.3.4.7.20.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. | |||||||||||||||||||||
| CpSlot3SendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.20.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. | |||||||||||||||||||||
| CpSlot3IpAddress | 1.3.6.1.4.1.994.3.4.7.20.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This field is used in the following card types: serial-ports - IP Address of the target device. | |||||||||||||||||||||
| CpSlot3Level0 | 1.3.6.1.4.1.994.3.4.7.20.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpSlot3Level1 | 1.3.6.1.4.1.994.3.4.7.20.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpSlot3Level2 | 1.3.6.1.4.1.994.3.4.7.20.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot3Level3 | 1.3.6.1.4.1.994.3.4.7.20.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot3Level4 | 1.3.6.1.4.1.994.3.4.7.20.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot3Level5 | 1.3.6.1.4.1.994.3.4.7.20.1.22 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot3ReadPeriod | 1.3.6.1.4.1.994.3.4.7.20.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpSlot3Thresh0 | 1.3.6.1.4.1.994.3.4.7.20.1.28 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value. | |||||||||||||||||||||
| CpSlot3Thresh1 | 1.3.6.1.4.1.994.3.4.7.20.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value. | |||||||||||||||||||||
| CpSlot3Thresh2 | 1.3.6.1.4.1.994.3.4.7.20.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value. | |||||||||||||||||||||
| CpSlot3Thresh3 | 1.3.6.1.4.1.994.3.4.7.20.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value. | |||||||||||||||||||||
| CpSlot3Thresh4 | 1.3.6.1.4.1.994.3.4.7.20.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value. | |||||||||||||||||||||
| CpSlot3Thresh5 | 1.3.6.1.4.1.994.3.4.7.20.1.33 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value. | |||||||||||||||||||||
| CpSlot3ContactStyle | 1.3.6.1.4.1.994.3.4.7.20.1.44 | ContactStyle | RW | ||||||||||||||||||
column · ContactStyle · read-write · current This field is used in the following card types: discrete-inputs - Determines the type of contact. | |||||||||||||||||||||
| CpSlot3Units | 1.3.6.1.4.1.994.3.4.7.20.1.46 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement. | |||||||||||||||||||||
| CpSlot3OutputMode | 1.3.6.1.4.1.994.3.4.7.20.1.47 | OutputMode | RW | ||||||||||||||||||
column · OutputMode · read-write · current This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated. | |||||||||||||||||||||
| CpSlot3OutputState | 1.3.6.1.4.1.994.3.4.7.20.1.48 | OutputState | RW | ||||||||||||||||||
column · OutputState · read-write · current This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point. | |||||||||||||||||||||
| CpSlot3OutputAuto | 1.3.6.1.4.1.994.3.4.7.20.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state. | |||||||||||||||||||||
| CpSlot3BaudRate | 1.3.6.1.4.1.994.3.4.7.20.1.57 | BaudRate | RW | ||||||||||||||||||
column · BaudRate · read-write · current This field is used in the following card types: serial-ports - Baud rate of the serial port. | |||||||||||||||||||||
| CpSlot3DataBits | 1.3.6.1.4.1.994.3.4.7.20.1.58 | DataBits | RW | ||||||||||||||||||
column · DataBits · read-write · current This field is used in the following card types: serial-ports - Number of data bit for the serial port. | |||||||||||||||||||||
| CpSlot3Parity | 1.3.6.1.4.1.994.3.4.7.20.1.59 | Parity | RW | ||||||||||||||||||
column · Parity · read-write · current This field is used in the following card types: serial-ports - Parity of the serial port. | |||||||||||||||||||||
| CpSlot3StopBits | 1.3.6.1.4.1.994.3.4.7.20.1.60 | StopBits | RW | ||||||||||||||||||
column · StopBits · read-write · current This field is used in the following card types: serial-ports - Number of stop bits for the serial port. | |||||||||||||||||||||
| CpSlot3Protocol | 1.3.6.1.4.1.994.3.4.7.20.1.61 | Protocol | RW | ||||||||||||||||||
column · Protocol · read-write · current This field is used in the following card types: serial-ports - Protocol the serial port is speaking. | |||||||||||||||||||||
| CpSlot3SerialRTS | 1.3.6.1.4.1.994.3.4.7.20.1.62 | SerialRTS | RW | ||||||||||||||||||
column · SerialRTS · read-write · current This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot3SerialCTS | 1.3.6.1.4.1.994.3.4.7.20.1.63 | SerialCTS | RW | ||||||||||||||||||
column · SerialCTS · read-write · current This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot3LiveDescription | 1.3.6.1.4.1.994.3.4.7.20.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input. | |||||||||||||||||||||
| CpSlot3LiveLevel | 1.3.6.1.4.1.994.3.4.7.20.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input. | |||||||||||||||||||||
| CpSlot3LiveRaw | 1.3.6.1.4.1.994.3.4.7.20.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpSlot3LiveTime | 1.3.6.1.4.1.994.3.4.7.20.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event. | |||||||||||||||||||||
| CpSlot3Present | 1.3.6.1.4.1.994.3.4.7.20.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist. | |||||||||||||||||||||
| CpSlot3OutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.20.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located. | |||||||||||||||||||||
| CpSlot3VoltageRange | 1.3.6.1.4.1.994.3.4.7.20.1.72 | VoltageRange | RO | ||||||||||||||||||
column · VoltageRange · read-only · current This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range. | |||||||||||||||||||||
| CpSlot3IPPortNum | 1.3.6.1.4.1.994.3.4.7.20.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - IP port number of the target device. | |||||||||||||||||||||
| CpSlot3IOFormat | 1.3.6.1.4.1.994.3.4.7.20.1.75 | IOFormat | RO | ||||||||||||||||||
column · IOFormat · read-only · current This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors. | |||||||||||||||||||||
| CpSlot3PortType | 1.3.6.1.4.1.994.3.4.7.20.1.76 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current This field is used in the following card types: serial-ports - The type of serial port. | |||||||||||||||||||||
| CpSlot3TL1SID | 1.3.6.1.4.1.994.3.4.7.20.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3TL1COND | 1.3.6.1.4.1.994.3.4.7.20.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3TL1Eqpt | 1.3.6.1.4.1.994.3.4.7.20.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3TL1Env | 1.3.6.1.4.1.994.3.4.7.20.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3TL1Srveff | 1.3.6.1.4.1.994.3.4.7.20.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3TL1Locn | 1.3.6.1.4.1.994.3.4.7.20.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3TL1Dirn | 1.3.6.1.4.1.994.3.4.7.20.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot3SensorType | 1.3.6.1.4.1.994.3.4.7.20.1.131 | SensorType | RO | ||||||||||||||||||
column · SensorType · read-only · current This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor. | |||||||||||||||||||||
| CpSlot3Index | 1.3.6.1.4.1.994.3.4.7.20.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpSlot4Table | 1.3.6.1.4.1.994.3.4.7.21 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Slot4 | |||||||||||||||||||||
| RpSlot4Entry | 1.3.6.1.4.1.994.3.4.7.21.1 | NA | |||||||||||||||||||
| CpSlot4Description | 1.3.6.1.4.1.994.3.4.7.21.1.3 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Desc0 | 1.3.6.1.4.1.994.3.4.7.21.1.4 | DescriptionString | RW | High High | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Desc1 | 1.3.6.1.4.1.994.3.4.7.21.1.5 | DescriptionString | RW | High | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Desc2 | 1.3.6.1.4.1.994.3.4.7.21.1.6 | DescriptionString | RW | Medium | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Desc3 | 1.3.6.1.4.1.994.3.4.7.21.1.7 | DescriptionString | RW | Low | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Desc4 | 1.3.6.1.4.1.994.3.4.7.21.1.8 | DescriptionString | RW | Low Low | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Desc5 | 1.3.6.1.4.1.994.3.4.7.21.1.9 | DescriptionString | RW | Offline | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Configured | 1.3.6.1.4.1.994.3.4.7.21.1.10 | Configured | RW | 0 | |||||||||||||||||
column · Configured · read-write · current This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4SendEmail | 1.3.6.1.4.1.994.3.4.7.21.1.11 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4SendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.21.1.12 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4IpAddress | 1.3.6.1.4.1.994.3.4.7.21.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This field is used in the following card types: serial-ports - IP Address of the target device. | |||||||||||||||||||||
| CpSlot4Level0 | 1.3.6.1.4.1.994.3.4.7.21.1.17 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Level1 | 1.3.6.1.4.1.994.3.4.7.21.1.18 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Level2 | 1.3.6.1.4.1.994.3.4.7.21.1.19 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Level3 | 1.3.6.1.4.1.994.3.4.7.21.1.20 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Level4 | 1.3.6.1.4.1.994.3.4.7.21.1.21 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Level5 | 1.3.6.1.4.1.994.3.4.7.21.1.22 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4ReadPeriod | 1.3.6.1.4.1.994.3.4.7.21.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpSlot4Thresh0 | 1.3.6.1.4.1.994.3.4.7.21.1.28 | DescriptionString | RO | 100 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Thresh1 | 1.3.6.1.4.1.994.3.4.7.21.1.29 | DescriptionString | RW | 80.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Thresh2 | 1.3.6.1.4.1.994.3.4.7.21.1.30 | DescriptionString | RW | 60.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Thresh3 | 1.3.6.1.4.1.994.3.4.7.21.1.31 | DescriptionString | RW | 40.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Thresh4 | 1.3.6.1.4.1.994.3.4.7.21.1.32 | DescriptionString | RW | 20.0 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Thresh5 | 1.3.6.1.4.1.994.3.4.7.21.1.33 | DescriptionString | RO | -100 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4ContactStyle | 1.3.6.1.4.1.994.3.4.7.21.1.44 | ContactStyle | RW | ||||||||||||||||||
column · ContactStyle · read-write · current This field is used in the following card types: discrete-inputs - Determines the type of contact. | |||||||||||||||||||||
| CpSlot4Units | 1.3.6.1.4.1.994.3.4.7.21.1.46 | DescriptionString | RO | | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4OutputMode | 1.3.6.1.4.1.994.3.4.7.21.1.47 | OutputMode | RW | ||||||||||||||||||
column · OutputMode · read-write · current This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated. | |||||||||||||||||||||
| CpSlot4OutputState | 1.3.6.1.4.1.994.3.4.7.21.1.48 | OutputState | RW | ||||||||||||||||||
column · OutputState · read-write · current This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point. | |||||||||||||||||||||
| CpSlot4OutputAuto | 1.3.6.1.4.1.994.3.4.7.21.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state. | |||||||||||||||||||||
| CpSlot4BaudRate | 1.3.6.1.4.1.994.3.4.7.21.1.57 | BaudRate | RW | ||||||||||||||||||
column · BaudRate · read-write · current This field is used in the following card types: serial-ports - Baud rate of the serial port. | |||||||||||||||||||||
| CpSlot4DataBits | 1.3.6.1.4.1.994.3.4.7.21.1.58 | DataBits | RW | ||||||||||||||||||
column · DataBits · read-write · current This field is used in the following card types: serial-ports - Number of data bit for the serial port. | |||||||||||||||||||||
| CpSlot4Parity | 1.3.6.1.4.1.994.3.4.7.21.1.59 | Parity | RW | ||||||||||||||||||
column · Parity · read-write · current This field is used in the following card types: serial-ports - Parity of the serial port. | |||||||||||||||||||||
| CpSlot4StopBits | 1.3.6.1.4.1.994.3.4.7.21.1.60 | StopBits | RW | ||||||||||||||||||
column · StopBits · read-write · current This field is used in the following card types: serial-ports - Number of stop bits for the serial port. | |||||||||||||||||||||
| CpSlot4Protocol | 1.3.6.1.4.1.994.3.4.7.21.1.61 | Protocol | RW | ||||||||||||||||||
column · Protocol · read-write · current This field is used in the following card types: serial-ports - Protocol the serial port is speaking. | |||||||||||||||||||||
| CpSlot4SerialRTS | 1.3.6.1.4.1.994.3.4.7.21.1.62 | SerialRTS | RW | ||||||||||||||||||
column · SerialRTS · read-write · current This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot4SerialCTS | 1.3.6.1.4.1.994.3.4.7.21.1.63 | SerialCTS | RW | ||||||||||||||||||
column · SerialCTS · read-write · current This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot4LiveDescription | 1.3.6.1.4.1.994.3.4.7.21.1.64 | DescriptionString | RO | High High | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4LiveLevel | 1.3.6.1.4.1.994.3.4.7.21.1.65 | DescriptionString | RO | Normal | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4LiveRaw | 1.3.6.1.4.1.994.3.4.7.21.1.66 | DescriptionString | RO | 0 | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4LiveTime | 1.3.6.1.4.1.994.3.4.7.21.1.67 | DescriptionString | RO | | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Present | 1.3.6.1.4.1.994.3.4.7.21.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist. | |||||||||||||||||||||
| CpSlot4OutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.21.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located. | |||||||||||||||||||||
| CpSlot4VoltageRange | 1.3.6.1.4.1.994.3.4.7.21.1.72 | VoltageRange | RO | 0 | |||||||||||||||||
column · VoltageRange · read-only · current This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4IPPortNum | 1.3.6.1.4.1.994.3.4.7.21.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - IP port number of the target device. | |||||||||||||||||||||
| CpSlot4IOFormat | 1.3.6.1.4.1.994.3.4.7.21.1.75 | IOFormat | RO | 2 | |||||||||||||||||
column · IOFormat · read-only · current This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4PortType | 1.3.6.1.4.1.994.3.4.7.21.1.76 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current This field is used in the following card types: serial-ports - The type of serial port. | |||||||||||||||||||||
| CpSlot4TL1SID | 1.3.6.1.4.1.994.3.4.7.21.1.116 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4TL1COND | 1.3.6.1.4.1.994.3.4.7.21.1.117 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4TL1Eqpt | 1.3.6.1.4.1.994.3.4.7.21.1.118 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4TL1Env | 1.3.6.1.4.1.994.3.4.7.21.1.119 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4TL1Srveff | 1.3.6.1.4.1.994.3.4.7.21.1.120 | TL1Srveff | RW | 0 | |||||||||||||||||
column · TL1Srveff · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4TL1Locn | 1.3.6.1.4.1.994.3.4.7.21.1.121 | TL1Locn | RW | 0 | |||||||||||||||||
column · TL1Locn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4TL1Dirn | 1.3.6.1.4.1.994.3.4.7.21.1.122 | TL1Dirn | RW | 0 | |||||||||||||||||
column · TL1Dirn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4SensorType | 1.3.6.1.4.1.994.3.4.7.21.1.131 | SensorType | RO | 0 | |||||||||||||||||
column · SensorType · read-only · current This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot4Index | 1.3.6.1.4.1.994.3.4.7.21.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpSlot5Table | 1.3.6.1.4.1.994.3.4.7.22 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Slot5 | |||||||||||||||||||||
| RpSlot5Entry | 1.3.6.1.4.1.994.3.4.7.22.1 | NA | |||||||||||||||||||
| CpSlot5Description | 1.3.6.1.4.1.994.3.4.7.22.1.3 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Desc0 | 1.3.6.1.4.1.994.3.4.7.22.1.4 | DescriptionString | RW | Off | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Desc1 | 1.3.6.1.4.1.994.3.4.7.22.1.5 | DescriptionString | RW | On | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Desc2 | 1.3.6.1.4.1.994.3.4.7.22.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot5Desc3 | 1.3.6.1.4.1.994.3.4.7.22.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot5Desc4 | 1.3.6.1.4.1.994.3.4.7.22.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot5Desc5 | 1.3.6.1.4.1.994.3.4.7.22.1.9 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot5Configured | 1.3.6.1.4.1.994.3.4.7.22.1.10 | Configured | RW | 0 | |||||||||||||||||
column · Configured · read-write · current This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5SendEmail | 1.3.6.1.4.1.994.3.4.7.22.1.11 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5SendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.22.1.12 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5IpAddress | 1.3.6.1.4.1.994.3.4.7.22.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current This field is used in the following card types: serial-ports - IP Address of the target device. | |||||||||||||||||||||
| CpSlot5Level0 | 1.3.6.1.4.1.994.3.4.7.22.1.17 | Level | RW | 0 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Level1 | 1.3.6.1.4.1.994.3.4.7.22.1.18 | Level | RW | 1 | |||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Level2 | 1.3.6.1.4.1.994.3.4.7.22.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot5Level3 | 1.3.6.1.4.1.994.3.4.7.22.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot5Level4 | 1.3.6.1.4.1.994.3.4.7.22.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot5Level5 | 1.3.6.1.4.1.994.3.4.7.22.1.22 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot5ReadPeriod | 1.3.6.1.4.1.994.3.4.7.22.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpSlot5Thresh0 | 1.3.6.1.4.1.994.3.4.7.22.1.28 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value. | |||||||||||||||||||||
| CpSlot5Thresh1 | 1.3.6.1.4.1.994.3.4.7.22.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value. | |||||||||||||||||||||
| CpSlot5Thresh2 | 1.3.6.1.4.1.994.3.4.7.22.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value. | |||||||||||||||||||||
| CpSlot5Thresh3 | 1.3.6.1.4.1.994.3.4.7.22.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value. | |||||||||||||||||||||
| CpSlot5Thresh4 | 1.3.6.1.4.1.994.3.4.7.22.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value. | |||||||||||||||||||||
| CpSlot5Thresh5 | 1.3.6.1.4.1.994.3.4.7.22.1.33 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value. | |||||||||||||||||||||
| CpSlot5ContactStyle | 1.3.6.1.4.1.994.3.4.7.22.1.44 | ContactStyle | RW | 0 | |||||||||||||||||
column · ContactStyle · read-write · current This field is used in the following card types: discrete-inputs - Determines the type of contact. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Units | 1.3.6.1.4.1.994.3.4.7.22.1.46 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement. | |||||||||||||||||||||
| CpSlot5OutputMode | 1.3.6.1.4.1.994.3.4.7.22.1.47 | OutputMode | RW | ||||||||||||||||||
column · OutputMode · read-write · current This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated. | |||||||||||||||||||||
| CpSlot5OutputState | 1.3.6.1.4.1.994.3.4.7.22.1.48 | OutputState | RW | ||||||||||||||||||
column · OutputState · read-write · current This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point. | |||||||||||||||||||||
| CpSlot5OutputAuto | 1.3.6.1.4.1.994.3.4.7.22.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state. | |||||||||||||||||||||
| CpSlot5BaudRate | 1.3.6.1.4.1.994.3.4.7.22.1.57 | BaudRate | RW | ||||||||||||||||||
column · BaudRate · read-write · current This field is used in the following card types: serial-ports - Baud rate of the serial port. | |||||||||||||||||||||
| CpSlot5DataBits | 1.3.6.1.4.1.994.3.4.7.22.1.58 | DataBits | RW | ||||||||||||||||||
column · DataBits · read-write · current This field is used in the following card types: serial-ports - Number of data bit for the serial port. | |||||||||||||||||||||
| CpSlot5Parity | 1.3.6.1.4.1.994.3.4.7.22.1.59 | Parity | RW | ||||||||||||||||||
column · Parity · read-write · current This field is used in the following card types: serial-ports - Parity of the serial port. | |||||||||||||||||||||
| CpSlot5StopBits | 1.3.6.1.4.1.994.3.4.7.22.1.60 | StopBits | RW | ||||||||||||||||||
column · StopBits · read-write · current This field is used in the following card types: serial-ports - Number of stop bits for the serial port. | |||||||||||||||||||||
| CpSlot5Protocol | 1.3.6.1.4.1.994.3.4.7.22.1.61 | Protocol | RW | ||||||||||||||||||
column · Protocol · read-write · current This field is used in the following card types: serial-ports - Protocol the serial port is speaking. | |||||||||||||||||||||
| CpSlot5SerialRTS | 1.3.6.1.4.1.994.3.4.7.22.1.62 | SerialRTS | RW | ||||||||||||||||||
column · SerialRTS · read-write · current This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot5SerialCTS | 1.3.6.1.4.1.994.3.4.7.22.1.63 | SerialCTS | RW | ||||||||||||||||||
column · SerialCTS · read-write · current This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port. | |||||||||||||||||||||
| CpSlot5LiveDescription | 1.3.6.1.4.1.994.3.4.7.22.1.64 | DescriptionString | RO | Off | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5LiveLevel | 1.3.6.1.4.1.994.3.4.7.22.1.65 | DescriptionString | RO | Normal | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5LiveRaw | 1.3.6.1.4.1.994.3.4.7.22.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpSlot5LiveTime | 1.3.6.1.4.1.994.3.4.7.22.1.67 | DescriptionString | RO | | |||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5Present | 1.3.6.1.4.1.994.3.4.7.22.1.68 | Boolean | RO | ||||||||||||||||||
column · Boolean · read-only · current This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist. | |||||||||||||||||||||
| CpSlot5OutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.22.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located. | |||||||||||||||||||||
| CpSlot5VoltageRange | 1.3.6.1.4.1.994.3.4.7.22.1.72 | VoltageRange | RO | ||||||||||||||||||
column · VoltageRange · read-only · current This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range. | |||||||||||||||||||||
| CpSlot5IPPortNum | 1.3.6.1.4.1.994.3.4.7.22.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - IP port number of the target device. | |||||||||||||||||||||
| CpSlot5IOFormat | 1.3.6.1.4.1.994.3.4.7.22.1.75 | IOFormat | RO | 0 | |||||||||||||||||
column · IOFormat · read-only · current This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5PortType | 1.3.6.1.4.1.994.3.4.7.22.1.76 | PortType | RO | ||||||||||||||||||
column · PortType · read-only · current This field is used in the following card types: serial-ports - The type of serial port. | |||||||||||||||||||||
| CpSlot5TL1SID | 1.3.6.1.4.1.994.3.4.7.22.1.116 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5TL1COND | 1.3.6.1.4.1.994.3.4.7.22.1.117 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5TL1Eqpt | 1.3.6.1.4.1.994.3.4.7.22.1.118 | DescriptionString | RW | | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5TL1Env | 1.3.6.1.4.1.994.3.4.7.22.1.119 | Boolean | RW | 0 | |||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5TL1Srveff | 1.3.6.1.4.1.994.3.4.7.22.1.120 | TL1Srveff | RW | 0 | |||||||||||||||||
column · TL1Srveff · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5TL1Locn | 1.3.6.1.4.1.994.3.4.7.22.1.121 | TL1Locn | RW | 0 | |||||||||||||||||
column · TL1Locn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5TL1Dirn | 1.3.6.1.4.1.994.3.4.7.22.1.122 | TL1Dirn | RW | 0 | |||||||||||||||||
column · TL1Dirn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot5SensorType | 1.3.6.1.4.1.994.3.4.7.22.1.131 | SensorType | RO | ||||||||||||||||||
column · SensorType · read-only · current This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor. | |||||||||||||||||||||
| CpSlot5Index | 1.3.6.1.4.1.994.3.4.7.22.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpSlot6Table | 1.3.6.1.4.1.994.3.4.7.23 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of Slot6 | |||||||||||||||||||||
| RpSlot6Entry | 1.3.6.1.4.1.994.3.4.7.23.1 | NA | |||||||||||||||||||
| CpSlot6Description | 1.3.6.1.4.1.994.3.4.7.23.1.3 | DescriptionString | RW | Serial Port 61 | |||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the alarm point. discrete-outputs - Description of the control point. serial-ports - Description of the serial port. onboard-sensors - Description of the onboard device. analog-Inputs - Description of the analog input device. analog-Sensors - Description of the sensor input device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6Desc0 | 1.3.6.1.4.1.994.3.4.7.23.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the off state. discrete-outputs - Description when the control point is open. onboard-sensors - The description for values between threshold 0 and threshold 1. analog-Inputs - The description for values between threshold 0 and threshold 1. analog-Sensors - The description for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpSlot6Desc1 | 1.3.6.1.4.1.994.3.4.7.23.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - Description of the on state. discrete-outputs - Description when the control point is closed. onboard-sensors - The description for values between threshold 1 and threshold 2. analog-Inputs - The description for values between threshold 1 and threshold 2. analog-Sensors - The description for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpSlot6Desc2 | 1.3.6.1.4.1.994.3.4.7.23.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 2 and threshold 3. analog-Inputs - The description for values between threshold 2 and threshold 3. analog-Sensors - The description for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot6Desc3 | 1.3.6.1.4.1.994.3.4.7.23.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 3 and threshold 4. analog-Inputs - The description for values between threshold 3 and threshold 4. analog-Sensors - The description for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot6Desc4 | 1.3.6.1.4.1.994.3.4.7.23.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - The description for values between threshold 4 and threshold 5. analog-Inputs - The description for values between threshold 4 and threshold 5. analog-Sensors - The description for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot6Desc5 | 1.3.6.1.4.1.994.3.4.7.23.1.9 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: analog-Inputs - Description for a communications failure to the sensor. analog-Sensors - Description for a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot6Configured | 1.3.6.1.4.1.994.3.4.7.23.1.10 | Configured | RW | 1 | |||||||||||||||||
column · Configured · read-write · current This field is used in the following card types: discrete-inputs - If set to true, changes of state will be reported. If set to false, not change of states will be reported. discrete-outputs - If set to true, the control point will operate. If false, it will not operate. serial-ports - If set to true, this serial port will be usable. If set to false the port will not be usable. onboard-sensors - If set to true, the onboard sensors will be used. If set to false the will be ignored. analog-Inputs - If set to true, the analog inputs will be usable. If set to false the analog inputs will be ignored. analog-Sensors - If set to true, the sensor inputs will be usable. If set to false the sensor inputs will be ignored. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6SendEmail | 1.3.6.1.4.1.994.3.4.7.23.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an email will be sent on a change of state. If false, no email will be sent. onboard-sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Inputs - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. analog-Sensors - If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. | |||||||||||||||||||||
| CpSlot6SendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.23.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. onboard-sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Inputs - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. analog-Sensors - If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. | |||||||||||||||||||||
| CpSlot6IpAddress | 1.3.6.1.4.1.994.3.4.7.23.1.14 | IpAddress | RW | 0.0.0.0 | |||||||||||||||||
column · IpAddress · read-write · current This field is used in the following card types: serial-ports - IP Address of the target device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6Level0 | 1.3.6.1.4.1.994.3.4.7.23.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the off state. discrete-outputs - Level of the control point when open. onboard-sensors - The level for values between threshold 0 and threshold 1. analog-Inputs - The level for values between threshold 0 and threshold 1. analog-Sensors - The level for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpSlot6Level1 | 1.3.6.1.4.1.994.3.4.7.23.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: discrete-inputs - Level of the on state. discrete-outputs - Level of the control point when closed. onboard-sensors - The level for values between threshold 1 and threshold 2. analog-Inputs - The level for values between threshold 1 and threshold 2. analog-Sensors - The level for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpSlot6Level2 | 1.3.6.1.4.1.994.3.4.7.23.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 2 and threshold 3. analog-Inputs - The level for values between threshold 2 and threshold 3. analog-Sensors - The level for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpSlot6Level3 | 1.3.6.1.4.1.994.3.4.7.23.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 3 and threshold 4. analog-Inputs - The level for values between threshold 3 and threshold 4. analog-Sensors - The level for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpSlot6Level4 | 1.3.6.1.4.1.994.3.4.7.23.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: onboard-sensors - The level for values between threshold 4 and threshold 5. analog-Inputs - The level for values between threshold 4 and threshold 5. analog-Sensors - The level for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpSlot6Level5 | 1.3.6.1.4.1.994.3.4.7.23.1.22 | Level | RW | ||||||||||||||||||
column · Level · read-write · current This field is used in the following card types: analog-Inputs - Level of a communications failure to the sensor. analog-Sensors - Level of a communications failure to the sensor. | |||||||||||||||||||||
| CpSlot6ReadPeriod | 1.3.6.1.4.1.994.3.4.7.23.1.23 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - Inactivity timeout (in minutes). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6Thresh0 | 1.3.6.1.4.1.994.3.4.7.23.1.28 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the minimun analog value. analog-Inputs - This is the maximum analog value. analog-Sensors - This is the maximum analog value. | |||||||||||||||||||||
| CpSlot6Thresh1 | 1.3.6.1.4.1.994.3.4.7.23.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the first threshold value. analog-Inputs - This is the first threshold value. analog-Sensors - This is the first threshold value. | |||||||||||||||||||||
| CpSlot6Thresh2 | 1.3.6.1.4.1.994.3.4.7.23.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the second threshold value. analog-Inputs - This is the second threshold value. analog-Sensors - This is the second threshold value. | |||||||||||||||||||||
| CpSlot6Thresh3 | 1.3.6.1.4.1.994.3.4.7.23.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the third threshold value. analog-Inputs - This is the third threshold value. analog-Sensors - This is the third threshold value. | |||||||||||||||||||||
| CpSlot6Thresh4 | 1.3.6.1.4.1.994.3.4.7.23.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: onboard-sensors - This is the fourth threshold value. analog-Inputs - This is the fourth threshold value. analog-Sensors - This is the fourth threshold value. | |||||||||||||||||||||
| CpSlot6Thresh5 | 1.3.6.1.4.1.994.3.4.7.23.1.33 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - This is the maximum threshold value. analog-Inputs - This is the minimum threshold value. analog-Sensors - This is the minimum threshold value. | |||||||||||||||||||||
| CpSlot6ContactStyle | 1.3.6.1.4.1.994.3.4.7.23.1.44 | ContactStyle | RW | ||||||||||||||||||
column · ContactStyle · read-write · current This field is used in the following card types: discrete-inputs - Determines the type of contact. | |||||||||||||||||||||
| CpSlot6Units | 1.3.6.1.4.1.994.3.4.7.23.1.46 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - Description of the units of measurement. analog-Inputs - Description of the units of measurement. analog-Sensors - Description of the units of measurement. | |||||||||||||||||||||
| CpSlot6OutputMode | 1.3.6.1.4.1.994.3.4.7.23.1.47 | OutputMode | RW | ||||||||||||||||||
column · OutputMode · read-write · current This field is used in the following card types: discrete-outputs - Defines the different ways a control point can be activated. | |||||||||||||||||||||
| CpSlot6OutputState | 1.3.6.1.4.1.994.3.4.7.23.1.48 | OutputState | RW | ||||||||||||||||||
column · OutputState · read-write · current This field is used in the following card types: discrete-outputs - A value of 0 will open the control point. A value of 1 will close the control point. | |||||||||||||||||||||
| CpSlot6OutputAuto | 1.3.6.1.4.1.994.3.4.7.23.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this alarm point will change state to the on state. | |||||||||||||||||||||
| CpSlot6BaudRate | 1.3.6.1.4.1.994.3.4.7.23.1.57 | BaudRate | RW | 5 | |||||||||||||||||
column · BaudRate · read-write · current This field is used in the following card types: serial-ports - Baud rate of the serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6DataBits | 1.3.6.1.4.1.994.3.4.7.23.1.58 | DataBits | RW | 1 | |||||||||||||||||
column · DataBits · read-write · current This field is used in the following card types: serial-ports - Number of data bit for the serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6Parity | 1.3.6.1.4.1.994.3.4.7.23.1.59 | Parity | RW | 0 | |||||||||||||||||
column · Parity · read-write · current This field is used in the following card types: serial-ports - Parity of the serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6StopBits | 1.3.6.1.4.1.994.3.4.7.23.1.60 | StopBits | RW | 0 | |||||||||||||||||
column · StopBits · read-write · current This field is used in the following card types: serial-ports - Number of stop bits for the serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6Protocol | 1.3.6.1.4.1.994.3.4.7.23.1.61 | Protocol | RW | 5 | |||||||||||||||||
column · Protocol · read-write · current This field is used in the following card types: serial-ports - Protocol the serial port is speaking. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6SerialRTS | 1.3.6.1.4.1.994.3.4.7.23.1.62 | SerialRTS | RW | 2 | |||||||||||||||||
column · SerialRTS · read-write · current This field is used in the following card types: serial-ports - Request To Send (RTS) setting for the serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6SerialCTS | 1.3.6.1.4.1.994.3.4.7.23.1.63 | SerialCTS | RW | 0 | |||||||||||||||||
column · SerialCTS · read-write · current This field is used in the following card types: serial-ports - Clear To Send (CTS) setting for the serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6LiveDescription | 1.3.6.1.4.1.994.3.4.7.23.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current description of the alarm state. onboard-sensors - The description of the current state of the onboard sensor analog-Inputs - The description of the current state of the analog input. analog-Sensors - The description of the current state of the sensor input. | |||||||||||||||||||||
| CpSlot6LiveLevel | 1.3.6.1.4.1.994.3.4.7.23.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The current level of the alarm. onboard-sensors - The level of the current state of the onboard sensor. analog-Inputs - The level of the current state of the analog input. analog-Sensors - The level of the current state of the sensor input. | |||||||||||||||||||||
| CpSlot6LiveRaw | 1.3.6.1.4.1.994.3.4.7.23.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: onboard-sensors - The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. analog-Inputs - The current reading from the analog input. This value will always be between the threshold 0 and threshold 5 values. analog-Sensors - The current reading from the sensor input. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpSlot6LiveTime | 1.3.6.1.4.1.994.3.4.7.23.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This field is used in the following card types: discrete-inputs - The time of the last change of state. onboard-sensors - The time of the last event. analog-Inputs - The time of the last event. analog-Sensors - The time of the last event. | |||||||||||||||||||||
| CpSlot6Present | 1.3.6.1.4.1.994.3.4.7.23.1.68 | Boolean | RO | 1 | |||||||||||||||||
column · Boolean · read-only · current This field is used in the following card types: serial-ports - If set to true, the serial port exists. If set to false the serial port does not exist. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6OutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.23.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: discrete-outputs - When this control point is opened, this is the package that the alarm point is located. | |||||||||||||||||||||
| CpSlot6VoltageRange | 1.3.6.1.4.1.994.3.4.7.23.1.72 | VoltageRange | RO | ||||||||||||||||||
column · VoltageRange · read-only · current This field is used in the following card types: onboard-sensors - The voltage range. analog-Inputs - The voltage range. analog-Sensors - The voltage range. | |||||||||||||||||||||
| CpSlot6IPPortNum | 1.3.6.1.4.1.994.3.4.7.23.1.73 | Integer32 | RW | 0 | |||||||||||||||||
column · Integer32 · read-write · current This field is used in the following card types: serial-ports - IP port number of the target device. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6IOFormat | 1.3.6.1.4.1.994.3.4.7.23.1.75 | IOFormat | RO | 7 | |||||||||||||||||
column · IOFormat · read-only · current This field is used in the following card types: discrete-inputs - The io format of discrete inputs. discrete-outputs - The io format of discrete outputs. serial-ports - The io format of serial ports. onboard-sensors - The io format of onboard sensors. analog-Inputs - The io format of analog inputs. analog-Sensors - The io format of analog sensors. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6PortType | 1.3.6.1.4.1.994.3.4.7.23.1.76 | PortType | RO | 1 | |||||||||||||||||
column · PortType · read-only · current This field is used in the following card types: serial-ports - The type of serial port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpSlot6TL1SID | 1.3.6.1.4.1.994.3.4.7.23.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6TL1COND | 1.3.6.1.4.1.994.3.4.7.23.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - discrete-outputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6TL1Eqpt | 1.3.6.1.4.1.994.3.4.7.23.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6TL1Env | 1.3.6.1.4.1.994.3.4.7.23.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6TL1Srveff | 1.3.6.1.4.1.994.3.4.7.23.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6TL1Locn | 1.3.6.1.4.1.994.3.4.7.23.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6TL1Dirn | 1.3.6.1.4.1.994.3.4.7.23.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current This field is used in the following card types: discrete-inputs - onboard-sensors - analog-Inputs - analog-Sensors - | |||||||||||||||||||||
| CpSlot6SensorType | 1.3.6.1.4.1.994.3.4.7.23.1.131 | SensorType | RO | ||||||||||||||||||
column · SensorType · read-only · current This field is used in the following card types: onboard-sensors - The type of sensor. analog-Inputs - The type of sensor. analog-Sensors - The type of sensor. | |||||||||||||||||||||
| CpSlot6Index | 1.3.6.1.4.1.994.3.4.7.23.1.999 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current Index. | |||||||||||||||||||||
| TpNetPortsTable | 1.3.6.1.4.1.994.3.4.7.24 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of NetPorts | |||||||||||||||||||||
| RpNetPortsEntry | 1.3.6.1.4.1.994.3.4.7.24.1 | NA | |||||||||||||||||||
| CpNetPortsDescription | 1.3.6.1.4.1.994.3.4.7.24.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the static network ports. | |||||||||||||||||||||
| CpNetPortsReadPeriod | 1.3.6.1.4.1.994.3.4.7.24.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpNetPortsIPPortNum | 1.3.6.1.4.1.994.3.4.7.24.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current IP port number to use when connecting to this network port. | |||||||||||||||||||||
| CpNetPortsIndex | 1.3.6.1.4.1.994.3.4.7.24.1.999 | Integer32 (1..5) | RO | ||||||||||||||||||
column · Integer32 (1..5) · read-only · current Index. | |||||||||||||||||||||
| NwirelessModem | 1.3.6.1.4.1.994.3.4.7.25 | ||||||||||||||||||||
| SwirelessModemBackupIPAddress | 1.3.6.1.4.1.994.3.4.7.25.78 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Wireless Modem IP Address. | |||||||||||||||||||||
| SwirelessModemTime | 1.3.6.1.4.1.994.3.4.7.25.81 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Wireless modem 24 hour reset time (hh:mm:ss) | |||||||||||||||||||||
| SwirelessModemTransmit | 1.3.6.1.4.1.994.3.4.7.25.96 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current The string that will be sent to the modem. | |||||||||||||||||||||
| SwirelessModemUseWirelessNetwork | 1.3.6.1.4.1.994.3.4.7.25.97 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Determines if modem tries to connect to wireless network. | |||||||||||||||||||||
| SwirelessModemUseResetTime | 1.3.6.1.4.1.994.3.4.7.25.98 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Determines if the modem resets at reset time. | |||||||||||||||||||||
| SwirelessModemResponseWaitTime | 1.3.6.1.4.1.994.3.4.7.25.99 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Response Timeout (s) | |||||||||||||||||||||
| SwirelessModemSecondary | 1.3.6.1.4.1.994.3.4.7.25.115 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Determines if the modem can use accept a dynamic (local) IP. | |||||||||||||||||||||
| NwebmonSecurity | 1.3.6.1.4.1.994.3.4.7.26 | ||||||||||||||||||||
| SwebmonSecurityUserLevel | 1.3.6.1.4.1.994.3.4.7.26.55 | Unsigned32 | RW | ||||||||||||||||||
scalar · Unsigned32 · read-write · current This is the default user level. Anyone who has access to this device will have these permissions without logging in. One of the following masks from each group are used: No FTP access 0x0000 0 FTP read-only 0x0001 1 FTP Full access 0x0003 3 No Web access 0x0000 0 Monitor 0x0010 16 Config 0x0030 48 Config + Accounts 0x00B0 176 The masks are added together to create a permission value. | |||||||||||||||||||||
| SwebmonSecurityUnsecured | 1.3.6.1.4.1.994.3.4.7.26.77 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Allow unsecured configuration for SNMP. | |||||||||||||||||||||
| NdateTime | 1.3.6.1.4.1.994.3.4.7.27 | ||||||||||||||||||||
| SdateTimeConfigured | 1.3.6.1.4.1.994.3.4.7.27.10 | Configured | RW | ||||||||||||||||||
scalar · Configured · read-write · current Determines whether or not NTP will be used to set system time. | |||||||||||||||||||||
| SdateTimeIpAddress | 1.3.6.1.4.1.994.3.4.7.27.14 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Time Server IP Address | |||||||||||||||||||||
| SdateTimeDaylightSaving | 1.3.6.1.4.1.994.3.4.7.27.53 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Determines if Daylight Savings is automatically adjusted. | |||||||||||||||||||||
| SdateTimeDate | 1.3.6.1.4.1.994.3.4.7.27.80 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current This is the system date. | |||||||||||||||||||||
| SdateTimeTime | 1.3.6.1.4.1.994.3.4.7.27.81 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current This is the system time. | |||||||||||||||||||||
| SdateTimeNegOffset | 1.3.6.1.4.1.994.3.4.7.27.88 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current True if a negative offset from UTC is desired | |||||||||||||||||||||
| SdateTimeUTCOffset | 1.3.6.1.4.1.994.3.4.7.27.89 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current Time offset of local time compared to UTC | |||||||||||||||||||||
| TpDCMProtocolTable | 1.3.6.1.4.1.994.3.4.7.28 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of DCMProtocol | |||||||||||||||||||||
| RpDCMProtocolEntry | 1.3.6.1.4.1.994.3.4.7.28.1 | NA | |||||||||||||||||||
| CpDCMProtocolDescription | 1.3.6.1.4.1.994.3.4.7.28.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the input device that DCM will poll. | |||||||||||||||||||||
| CpDCMProtocolConfigured | 1.3.6.1.4.1.994.3.4.7.28.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this input will be polled in DCM. If set to false, it will not be polled. | |||||||||||||||||||||
| CpDCMProtocolBaseDCMAddress | 1.3.6.1.4.1.994.3.4.7.28.1.83 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Base DCM address for this input device. | |||||||||||||||||||||
| CpDCMProtocolIndex | 1.3.6.1.4.1.994.3.4.7.28.1.999 | Integer32 (1..27) | RO | ||||||||||||||||||
column · Integer32 (1..27) · read-only · current Index. | |||||||||||||||||||||
| TpdialOutTable | 1.3.6.1.4.1.994.3.4.7.29 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of dialOut | |||||||||||||||||||||
| RpdialOutEntry | 1.3.6.1.4.1.994.3.4.7.29.1 | NA | |||||||||||||||||||
| CpdialOutConfigured | 1.3.6.1.4.1.994.3.4.7.29.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current Determines whether or not dial ou will be used to send SNMP traps. | |||||||||||||||||||||
| CpdialOutName | 1.3.6.1.4.1.994.3.4.7.29.1.25 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Dial out Username | |||||||||||||||||||||
| CpdialOutPassword | 1.3.6.1.4.1.994.3.4.7.29.1.26 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Password to use when dialing out | |||||||||||||||||||||
| CpdialOutDialOutNumber | 1.3.6.1.4.1.994.3.4.7.29.1.79 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Number to dial for dial out | |||||||||||||||||||||
| CpdialOutIndex | 1.3.6.1.4.1.994.3.4.7.29.1.999 | Integer32 (1..4) | RO | ||||||||||||||||||
column · Integer32 (1..4) · read-only · current Index. | |||||||||||||||||||||
| TpderivedDiscreteTable | 1.3.6.1.4.1.994.3.4.7.30 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of derivedDiscrete | |||||||||||||||||||||
| RpderivedDiscreteEntry | 1.3.6.1.4.1.994.3.4.7.30.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry for configuration table of derivedDiscrete | |||||||||||||||||||||
| CpderivedDiscreteDescription | 1.3.6.1.4.1.994.3.4.7.30.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the derived alarm point. | |||||||||||||||||||||
| CpderivedDiscreteDesc0 | 1.3.6.1.4.1.994.3.4.7.30.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the off state. | |||||||||||||||||||||
| CpderivedDiscreteDesc1 | 1.3.6.1.4.1.994.3.4.7.30.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the on state. | |||||||||||||||||||||
| CpderivedDiscreteConfigured | 1.3.6.1.4.1.994.3.4.7.30.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, changes of state will be reported. If set to false, not change of states will be reported. | |||||||||||||||||||||
| CpderivedDiscreteSendEmail | 1.3.6.1.4.1.994.3.4.7.30.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true, an email will be sent on a change of state. If false, no email will be sent. | |||||||||||||||||||||
| CpderivedDiscreteSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.30.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. | |||||||||||||||||||||
| CpderivedDiscreteLevel0 | 1.3.6.1.4.1.994.3.4.7.30.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Level of the off state. | |||||||||||||||||||||
| CpderivedDiscreteLevel1 | 1.3.6.1.4.1.994.3.4.7.30.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Level of the on state. | |||||||||||||||||||||
| CpderivedDiscreteLiveDescription | 1.3.6.1.4.1.994.3.4.7.30.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current description of the alarm state. | |||||||||||||||||||||
| CpderivedDiscreteLiveLevel | 1.3.6.1.4.1.994.3.4.7.30.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current level of the alarm. | |||||||||||||||||||||
| CpderivedDiscreteLiveTime | 1.3.6.1.4.1.994.3.4.7.30.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The time of the last change of state. | |||||||||||||||||||||
| CpderivedDiscreteElementAPkg | 1.3.6.1.4.1.994.3.4.7.30.1.90 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Package where the alarm point is located for element A. | |||||||||||||||||||||
| CpderivedDiscreteElementAPoint | 1.3.6.1.4.1.994.3.4.7.30.1.91 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Alarm point for element A. | |||||||||||||||||||||
| CpderivedDiscreteElementBPkg | 1.3.6.1.4.1.994.3.4.7.30.1.92 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Package where the alarm point is located for element B. | |||||||||||||||||||||
| CpderivedDiscreteElementBPoint | 1.3.6.1.4.1.994.3.4.7.30.1.93 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Alarm point for element B. | |||||||||||||||||||||
| CpderivedDiscreteDiscreteFormula | 1.3.6.1.4.1.994.3.4.7.30.1.94 | DiscreteFormula | RW | ||||||||||||||||||
column · DiscreteFormula · read-write · current The formula that will be used to compute the derived alarm. | |||||||||||||||||||||
| CpderivedDiscreteTL1SID | 1.3.6.1.4.1.994.3.4.7.30.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteTL1COND | 1.3.6.1.4.1.994.3.4.7.30.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.30.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteTL1Env | 1.3.6.1.4.1.994.3.4.7.30.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteTL1Srveff | 1.3.6.1.4.1.994.3.4.7.30.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteTL1Locn | 1.3.6.1.4.1.994.3.4.7.30.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteTL1Dirn | 1.3.6.1.4.1.994.3.4.7.30.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. | |||||||||||||||||||||
| CpderivedDiscreteIndex | 1.3.6.1.4.1.994.3.4.7.30.1.999 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current Index. | |||||||||||||||||||||
| Nlicense | 1.3.6.1.4.1.994.3.4.7.31 | ||||||||||||||||||||
| SlicenseDescription | 1.3.6.1.4.1.994.3.4.7.31.3 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current This describes the status of the license | |||||||||||||||||||||
| SlicenseLicenseKey | 1.3.6.1.4.1.994.3.4.7.31.84 | DescriptionString | RW | ||||||||||||||||||
scalar · DescriptionString · read-write · current This is the License Key. | |||||||||||||||||||||
| SlicenseExpires | 1.3.6.1.4.1.994.3.4.7.31.85 | DescriptionString | RO | ||||||||||||||||||
scalar · DescriptionString · read-only · current This is the date the current License will expire. | |||||||||||||||||||||
| SlicenseAllowTL1 | 1.3.6.1.4.1.994.3.4.7.31.124 | Boolean | RO | ||||||||||||||||||
scalar · Boolean · read-only · current This describes the status of TL1 support in the license | |||||||||||||||||||||
| Tpe2aHostTable | 1.3.6.1.4.1.994.3.4.7.32 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of e2aHost | |||||||||||||||||||||
| Rpe2aHostEntry | 1.3.6.1.4.1.994.3.4.7.32.1 | NA | |||||||||||||||||||
| Cpe2aHostDescription | 1.3.6.1.4.1.994.3.4.7.32.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the connection. | |||||||||||||||||||||
| Cpe2aHostConfigured | 1.3.6.1.4.1.994.3.4.7.32.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this route will be used by E2A. | |||||||||||||||||||||
| Cpe2aHostIpAddress | 1.3.6.1.4.1.994.3.4.7.32.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of the remote device. | |||||||||||||||||||||
| Cpe2aHostLevel0 | 1.3.6.1.4.1.994.3.4.7.32.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with the online state. | |||||||||||||||||||||
| Cpe2aHostLevel1 | 1.3.6.1.4.1.994.3.4.7.32.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with the offline state. | |||||||||||||||||||||
| Cpe2aHostLevel2 | 1.3.6.1.4.1.994.3.4.7.32.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current Alarm level associated with the connecting state. | |||||||||||||||||||||
| Cpe2aHostRosterID | 1.3.6.1.4.1.994.3.4.7.32.1.37 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Serial port number to use when connecting to WebMon. | |||||||||||||||||||||
| Cpe2aHostPollAddress | 1.3.6.1.4.1.994.3.4.7.32.1.56 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The E2A address of the remote device. | |||||||||||||||||||||
| Cpe2aHostIPPortNum | 1.3.6.1.4.1.994.3.4.7.32.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current IP port number to use when connecting to the remote device. | |||||||||||||||||||||
| Cpe2aHostTL1SID | 1.3.6.1.4.1.994.3.4.7.32.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. | |||||||||||||||||||||
| Cpe2aHostTL1COND | 1.3.6.1.4.1.994.3.4.7.32.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. | |||||||||||||||||||||
| Cpe2aHostTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.32.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. | |||||||||||||||||||||
| Cpe2aHostTL1Env | 1.3.6.1.4.1.994.3.4.7.32.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. | |||||||||||||||||||||
| Cpe2aHostTL1Srveff | 1.3.6.1.4.1.994.3.4.7.32.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. | |||||||||||||||||||||
| Cpe2aHostTL1Locn | 1.3.6.1.4.1.994.3.4.7.32.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. | |||||||||||||||||||||
| Cpe2aHostTL1Dirn | 1.3.6.1.4.1.994.3.4.7.32.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. | |||||||||||||||||||||
| Cpe2aHostIndex | 1.3.6.1.4.1.994.3.4.7.32.1.999 | Integer32 (1..256) | RO | ||||||||||||||||||
column · Integer32 (1..256) · read-only · current Index. | |||||||||||||||||||||
| TpderivedAnalogTable | 1.3.6.1.4.1.994.3.4.7.33 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of derivedAnalog | |||||||||||||||||||||
| RpderivedAnalogEntry | 1.3.6.1.4.1.994.3.4.7.33.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry for configuration table of derivedAnalog
| |||||||||||||||||||||
| CpderivedAnalogDescription | 1.3.6.1.4.1.994.3.4.7.33.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the derived alarm point. | |||||||||||||||||||||
| CpderivedAnalogDesc0 | 1.3.6.1.4.1.994.3.4.7.33.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for derived values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpderivedAnalogDesc1 | 1.3.6.1.4.1.994.3.4.7.33.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for derived values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpderivedAnalogDesc2 | 1.3.6.1.4.1.994.3.4.7.33.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for derived values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpderivedAnalogDesc3 | 1.3.6.1.4.1.994.3.4.7.33.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for derived values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpderivedAnalogDesc4 | 1.3.6.1.4.1.994.3.4.7.33.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for derived values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpderivedAnalogConfigured | 1.3.6.1.4.1.994.3.4.7.33.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, changes of state will be reported. If set to false, not change of states will be reported. | |||||||||||||||||||||
| CpderivedAnalogSendEmail | 1.3.6.1.4.1.994.3.4.7.33.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true, an email will be sent on a change of state. If false, no email will be sent. | |||||||||||||||||||||
| CpderivedAnalogSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.33.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true, an SNMP trap will be sent on a change of state. If false, no SNMP trap will be sent. | |||||||||||||||||||||
| CpderivedAnalogLevel0 | 1.3.6.1.4.1.994.3.4.7.33.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for derived values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpderivedAnalogLevel1 | 1.3.6.1.4.1.994.3.4.7.33.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for derived values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpderivedAnalogLevel2 | 1.3.6.1.4.1.994.3.4.7.33.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for derived values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpderivedAnalogLevel3 | 1.3.6.1.4.1.994.3.4.7.33.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for derived values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpderivedAnalogLevel4 | 1.3.6.1.4.1.994.3.4.7.33.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for derived values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpderivedAnalogThresh0 | 1.3.6.1.4.1.994.3.4.7.33.1.28 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the maximum analog derived value. | |||||||||||||||||||||
| CpderivedAnalogThresh1 | 1.3.6.1.4.1.994.3.4.7.33.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the first threshold derived value. | |||||||||||||||||||||
| CpderivedAnalogThresh2 | 1.3.6.1.4.1.994.3.4.7.33.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the second threshold derived value. | |||||||||||||||||||||
| CpderivedAnalogThresh3 | 1.3.6.1.4.1.994.3.4.7.33.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the third threshold derived value. | |||||||||||||||||||||
| CpderivedAnalogThresh4 | 1.3.6.1.4.1.994.3.4.7.33.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the fourth threshold derived value. | |||||||||||||||||||||
| CpderivedAnalogThresh5 | 1.3.6.1.4.1.994.3.4.7.33.1.33 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the minimum threshold derived value. | |||||||||||||||||||||
| CpderivedAnalogUnits | 1.3.6.1.4.1.994.3.4.7.33.1.46 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the units of measurement. | |||||||||||||||||||||
| CpderivedAnalogLiveDescription | 1.3.6.1.4.1.994.3.4.7.33.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current description of the alarm state. | |||||||||||||||||||||
| CpderivedAnalogLiveLevel | 1.3.6.1.4.1.994.3.4.7.33.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current level of the alarm. | |||||||||||||||||||||
| CpderivedAnalogLiveRaw | 1.3.6.1.4.1.994.3.4.7.33.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current derived reading from the analog devices. This value will alwaysbe between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpderivedAnalogLiveTime | 1.3.6.1.4.1.994.3.4.7.33.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The time of the last change of state. | |||||||||||||||||||||
| CpderivedAnalogElementAPkg | 1.3.6.1.4.1.994.3.4.7.33.1.90 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Package where the alarm point is located for element A. | |||||||||||||||||||||
| CpderivedAnalogElementAPoint | 1.3.6.1.4.1.994.3.4.7.33.1.91 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Alarm point for element A. | |||||||||||||||||||||
| CpderivedAnalogElementBPkg | 1.3.6.1.4.1.994.3.4.7.33.1.92 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Package where the alarm point is located for element B. | |||||||||||||||||||||
| CpderivedAnalogElementBPoint | 1.3.6.1.4.1.994.3.4.7.33.1.93 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Alarm point for element B. | |||||||||||||||||||||
| CpderivedAnalogFormula | 1.3.6.1.4.1.994.3.4.7.33.1.95 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The formula that will be used to compute the derived alarm. | |||||||||||||||||||||
| CpderivedAnalogTL1SID | 1.3.6.1.4.1.994.3.4.7.33.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. | |||||||||||||||||||||
| CpderivedAnalogTL1COND | 1.3.6.1.4.1.994.3.4.7.33.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. | |||||||||||||||||||||
| CpderivedAnalogTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.33.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. | |||||||||||||||||||||
| CpderivedAnalogTL1Env | 1.3.6.1.4.1.994.3.4.7.33.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. | |||||||||||||||||||||
| CpderivedAnalogTL1Srveff | 1.3.6.1.4.1.994.3.4.7.33.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. | |||||||||||||||||||||
| CpderivedAnalogTL1Locn | 1.3.6.1.4.1.994.3.4.7.33.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. | |||||||||||||||||||||
| CpderivedAnalogTL1Dirn | 1.3.6.1.4.1.994.3.4.7.33.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. | |||||||||||||||||||||
| CpderivedAnalogIndex | 1.3.6.1.4.1.994.3.4.7.33.1.999 | Integer32 (1..24) | RO | ||||||||||||||||||
column · Integer32 (1..24) · read-only · current Index. | |||||||||||||||||||||
| TpgpsTable | 1.3.6.1.4.1.994.3.4.7.34 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of gps | |||||||||||||||||||||
| RpgpsEntry | 1.3.6.1.4.1.994.3.4.7.34.1 | NA | |||||||||||||||||||
| CpgpsDescription | 1.3.6.1.4.1.994.3.4.7.34.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the onboard device. | |||||||||||||||||||||
| CpgpsDesc0 | 1.3.6.1.4.1.994.3.4.7.34.1.4 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpgpsDesc1 | 1.3.6.1.4.1.994.3.4.7.34.1.5 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpgpsDesc2 | 1.3.6.1.4.1.994.3.4.7.34.1.6 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpgpsDesc3 | 1.3.6.1.4.1.994.3.4.7.34.1.7 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpgpsDesc4 | 1.3.6.1.4.1.994.3.4.7.34.1.8 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current The description for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpgpsConfigured | 1.3.6.1.4.1.994.3.4.7.34.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, the onboard sensors will be used. If set to false the will be ignored. | |||||||||||||||||||||
| CpgpsSendEmail | 1.3.6.1.4.1.994.3.4.7.34.1.11 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true an email event will be set when a threshold is crossed. If set to false no email event will be sent. | |||||||||||||||||||||
| CpgpsSendSNMPTrap | 1.3.6.1.4.1.994.3.4.7.34.1.12 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current If set to true an SNMP trap will be set when a threshold is crossed. If set to false no SNMP trap will be sent. | |||||||||||||||||||||
| CpgpsLevel0 | 1.3.6.1.4.1.994.3.4.7.34.1.17 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 0 and threshold 1. | |||||||||||||||||||||
| CpgpsLevel1 | 1.3.6.1.4.1.994.3.4.7.34.1.18 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 1 and threshold 2. | |||||||||||||||||||||
| CpgpsLevel2 | 1.3.6.1.4.1.994.3.4.7.34.1.19 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 2 and threshold 3. | |||||||||||||||||||||
| CpgpsLevel3 | 1.3.6.1.4.1.994.3.4.7.34.1.20 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 3 and threshold 4. | |||||||||||||||||||||
| CpgpsLevel4 | 1.3.6.1.4.1.994.3.4.7.34.1.21 | Level | RW | ||||||||||||||||||
column · Level · read-write · current The level for values between threshold 4 and threshold 5. | |||||||||||||||||||||
| CpgpsThresh0 | 1.3.6.1.4.1.994.3.4.7.34.1.28 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This is the minimun analog value. | |||||||||||||||||||||
| CpgpsThresh1 | 1.3.6.1.4.1.994.3.4.7.34.1.29 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the first threshold value. | |||||||||||||||||||||
| CpgpsThresh2 | 1.3.6.1.4.1.994.3.4.7.34.1.30 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the second threshold value. | |||||||||||||||||||||
| CpgpsThresh3 | 1.3.6.1.4.1.994.3.4.7.34.1.31 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the third threshold value. | |||||||||||||||||||||
| CpgpsThresh4 | 1.3.6.1.4.1.994.3.4.7.34.1.32 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current This is the fourth threshold value. | |||||||||||||||||||||
| CpgpsThresh5 | 1.3.6.1.4.1.994.3.4.7.34.1.33 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current This is the maximum threshold value. | |||||||||||||||||||||
| CpgpsUnits | 1.3.6.1.4.1.994.3.4.7.34.1.46 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the units of measurement. | |||||||||||||||||||||
| CpgpsLiveDescription | 1.3.6.1.4.1.994.3.4.7.34.1.64 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The description of the current state of the onboard sensor | |||||||||||||||||||||
| CpgpsLiveLevel | 1.3.6.1.4.1.994.3.4.7.34.1.65 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The level of the current state of the onboard sensor. | |||||||||||||||||||||
| CpgpsLiveRaw | 1.3.6.1.4.1.994.3.4.7.34.1.66 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The current reading from the onboard sensor. This value will always be between the threshold 0 and threshold 5 values. | |||||||||||||||||||||
| CpgpsLiveTime | 1.3.6.1.4.1.994.3.4.7.34.1.67 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current The time of the last event. | |||||||||||||||||||||
| CpgpsTL1SID | 1.3.6.1.4.1.994.3.4.7.34.1.116 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) System ID associated with this item. | |||||||||||||||||||||
| CpgpsTL1COND | 1.3.6.1.4.1.994.3.4.7.34.1.117 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) Condition text associated with this item. | |||||||||||||||||||||
| CpgpsTL1Eqpt | 1.3.6.1.4.1.994.3.4.7.34.1.118 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current (TL1) EQPT field associated with this item. | |||||||||||||||||||||
| CpgpsTL1Env | 1.3.6.1.4.1.994.3.4.7.34.1.119 | Boolean | RW | ||||||||||||||||||
column · Boolean · read-write · current (TL1) Environmental field associated with this item. | |||||||||||||||||||||
| CpgpsTL1Srveff | 1.3.6.1.4.1.994.3.4.7.34.1.120 | TL1Srveff | RW | ||||||||||||||||||
column · TL1Srveff · read-write · current (TL1) Service Effecting field associated with this item. | |||||||||||||||||||||
| CpgpsTL1Locn | 1.3.6.1.4.1.994.3.4.7.34.1.121 | TL1Locn | RW | ||||||||||||||||||
column · TL1Locn · read-write · current (TL1) Location field associated with this item. | |||||||||||||||||||||
| CpgpsTL1Dirn | 1.3.6.1.4.1.994.3.4.7.34.1.122 | TL1Dirn | RW | ||||||||||||||||||
column · TL1Dirn · read-write · current (TL1) Direction field associated with this item. | |||||||||||||||||||||
| CpgpsIndex | 1.3.6.1.4.1.994.3.4.7.34.1.999 | Integer32 (1..3) | RO | ||||||||||||||||||
column · Integer32 (1..3) · read-only · current Index. | |||||||||||||||||||||
| TpportRedirectTable | 1.3.6.1.4.1.994.3.4.7.35 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of portRedirect | |||||||||||||||||||||
| RpportRedirectEntry | 1.3.6.1.4.1.994.3.4.7.35.1 | NA | |||||||||||||||||||
| CpportRedirectDescription | 1.3.6.1.4.1.994.3.4.7.35.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Description of the connection. | |||||||||||||||||||||
| CpportRedirectConfigured | 1.3.6.1.4.1.994.3.4.7.35.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this route will be allowed. | |||||||||||||||||||||
| CpportRedirectIpAddress | 1.3.6.1.4.1.994.3.4.7.35.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of the remote device. | |||||||||||||||||||||
| CpportRedirectReadPeriod | 1.3.6.1.4.1.994.3.4.7.35.1.23 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Inactivity timeout (in minutes). | |||||||||||||||||||||
| CpportRedirectRosterID | 1.3.6.1.4.1.994.3.4.7.35.1.37 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current IP port number to use when connecting to the remote device. | |||||||||||||||||||||
| CpportRedirectIPPortNum | 1.3.6.1.4.1.994.3.4.7.35.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current IP port number to use when connecting to WebMon. | |||||||||||||||||||||
| CpportRedirectIndex | 1.3.6.1.4.1.994.3.4.7.35.1.999 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current Index. | |||||||||||||||||||||
| TpscheduleATable | 1.3.6.1.4.1.994.3.4.7.36 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of scheduleA | |||||||||||||||||||||
| RpscheduleAEntry | 1.3.6.1.4.1.994.3.4.7.36.1 | NA | |||||||||||||||||||
| CpscheduleADayOfWeek | 1.3.6.1.4.1.994.3.4.7.36.1.102 | DayOfWeek | RO | ||||||||||||||||||
column · DayOfWeek · read-only · current The day of the week | |||||||||||||||||||||
| CpscheduleAConfiguredState | 1.3.6.1.4.1.994.3.4.7.36.1.103 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the beginning of the day. | |||||||||||||||||||||
| CpscheduleAConfigured1 | 1.3.6.1.4.1.994.3.4.7.36.1.104 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 1 and 2. | |||||||||||||||||||||
| CpscheduleAConfigured2 | 1.3.6.1.4.1.994.3.4.7.36.1.105 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 2 and 3. | |||||||||||||||||||||
| CpscheduleAConfigured3 | 1.3.6.1.4.1.994.3.4.7.36.1.106 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 3 and 4. | |||||||||||||||||||||
| CpscheduleAConfigured4 | 1.3.6.1.4.1.994.3.4.7.36.1.107 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the end of the day. | |||||||||||||||||||||
| CpscheduleATime0 | 1.3.6.1.4.1.994.3.4.7.36.1.108 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 0, the beginning of the day. | |||||||||||||||||||||
| CpscheduleATime1 | 1.3.6.1.4.1.994.3.4.7.36.1.109 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 1. | |||||||||||||||||||||
| CpscheduleATime2 | 1.3.6.1.4.1.994.3.4.7.36.1.110 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 2. | |||||||||||||||||||||
| CpscheduleATime3 | 1.3.6.1.4.1.994.3.4.7.36.1.111 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 3. | |||||||||||||||||||||
| CpscheduleATime4 | 1.3.6.1.4.1.994.3.4.7.36.1.112 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 4. | |||||||||||||||||||||
| CpscheduleATime5 | 1.3.6.1.4.1.994.3.4.7.36.1.113 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 5, the end of the day. | |||||||||||||||||||||
| CpscheduleAIndex | 1.3.6.1.4.1.994.3.4.7.36.1.999 | Integer32 (1..7) | RO | ||||||||||||||||||
column · Integer32 (1..7) · read-only · current Index. | |||||||||||||||||||||
| TpscheduleBTable | 1.3.6.1.4.1.994.3.4.7.37 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of scheduleB | |||||||||||||||||||||
| RpscheduleBEntry | 1.3.6.1.4.1.994.3.4.7.37.1 | NA | |||||||||||||||||||
| CpscheduleBDayOfWeek | 1.3.6.1.4.1.994.3.4.7.37.1.102 | DayOfWeek | RO | ||||||||||||||||||
column · DayOfWeek · read-only · current The day of the week | |||||||||||||||||||||
| CpscheduleBConfiguredState | 1.3.6.1.4.1.994.3.4.7.37.1.103 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the beginning of the day. | |||||||||||||||||||||
| CpscheduleBConfigured1 | 1.3.6.1.4.1.994.3.4.7.37.1.104 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 1 and 2. | |||||||||||||||||||||
| CpscheduleBConfigured2 | 1.3.6.1.4.1.994.3.4.7.37.1.105 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 2 and 3. | |||||||||||||||||||||
| CpscheduleBConfigured3 | 1.3.6.1.4.1.994.3.4.7.37.1.106 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 3 and 4. | |||||||||||||||||||||
| CpscheduleBConfigured4 | 1.3.6.1.4.1.994.3.4.7.37.1.107 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the end of the day. | |||||||||||||||||||||
| CpscheduleBTime0 | 1.3.6.1.4.1.994.3.4.7.37.1.108 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 0, the beginning of the day. | |||||||||||||||||||||
| CpscheduleBTime1 | 1.3.6.1.4.1.994.3.4.7.37.1.109 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 1. | |||||||||||||||||||||
| CpscheduleBTime2 | 1.3.6.1.4.1.994.3.4.7.37.1.110 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 2. | |||||||||||||||||||||
| CpscheduleBTime3 | 1.3.6.1.4.1.994.3.4.7.37.1.111 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 3. | |||||||||||||||||||||
| CpscheduleBTime4 | 1.3.6.1.4.1.994.3.4.7.37.1.112 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 4. | |||||||||||||||||||||
| CpscheduleBTime5 | 1.3.6.1.4.1.994.3.4.7.37.1.113 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 5, the end of the day. | |||||||||||||||||||||
| CpscheduleBIndex | 1.3.6.1.4.1.994.3.4.7.37.1.999 | Integer32 (1..7) | RO | ||||||||||||||||||
column · Integer32 (1..7) · read-only · current Index. | |||||||||||||||||||||
| TpscheduleCTable | 1.3.6.1.4.1.994.3.4.7.38 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of scheduleC | |||||||||||||||||||||
| RpscheduleCEntry | 1.3.6.1.4.1.994.3.4.7.38.1 | NA | |||||||||||||||||||
| CpscheduleCDayOfWeek | 1.3.6.1.4.1.994.3.4.7.38.1.102 | DayOfWeek | RO | ||||||||||||||||||
column · DayOfWeek · read-only · current The day of the week | |||||||||||||||||||||
| CpscheduleCConfiguredState | 1.3.6.1.4.1.994.3.4.7.38.1.103 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the beginning of the day. | |||||||||||||||||||||
| CpscheduleCConfigured1 | 1.3.6.1.4.1.994.3.4.7.38.1.104 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 1 and 2. | |||||||||||||||||||||
| CpscheduleCConfigured2 | 1.3.6.1.4.1.994.3.4.7.38.1.105 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 2 and 3. | |||||||||||||||||||||
| CpscheduleCConfigured3 | 1.3.6.1.4.1.994.3.4.7.38.1.106 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 3 and 4. | |||||||||||||||||||||
| CpscheduleCConfigured4 | 1.3.6.1.4.1.994.3.4.7.38.1.107 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the end of the day. | |||||||||||||||||||||
| CpscheduleCTime0 | 1.3.6.1.4.1.994.3.4.7.38.1.108 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 0, the beginning of the day. | |||||||||||||||||||||
| CpscheduleCTime1 | 1.3.6.1.4.1.994.3.4.7.38.1.109 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 1. | |||||||||||||||||||||
| CpscheduleCTime2 | 1.3.6.1.4.1.994.3.4.7.38.1.110 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 2. | |||||||||||||||||||||
| CpscheduleCTime3 | 1.3.6.1.4.1.994.3.4.7.38.1.111 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 3. | |||||||||||||||||||||
| CpscheduleCTime4 | 1.3.6.1.4.1.994.3.4.7.38.1.112 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 4. | |||||||||||||||||||||
| CpscheduleCTime5 | 1.3.6.1.4.1.994.3.4.7.38.1.113 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 5, the end of the day. | |||||||||||||||||||||
| CpscheduleCIndex | 1.3.6.1.4.1.994.3.4.7.38.1.999 | Integer32 (1..7) | RO | ||||||||||||||||||
column · Integer32 (1..7) · read-only · current Index. | |||||||||||||||||||||
| TpscheduleDTable | 1.3.6.1.4.1.994.3.4.7.39 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of scheduleD | |||||||||||||||||||||
| RpscheduleDEntry | 1.3.6.1.4.1.994.3.4.7.39.1 | NA | |||||||||||||||||||
| CpscheduleDDayOfWeek | 1.3.6.1.4.1.994.3.4.7.39.1.102 | DayOfWeek | RO | ||||||||||||||||||
column · DayOfWeek · read-only · current The day of the week | |||||||||||||||||||||
| CpscheduleDConfiguredState | 1.3.6.1.4.1.994.3.4.7.39.1.103 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the beginning of the day. | |||||||||||||||||||||
| CpscheduleDConfigured1 | 1.3.6.1.4.1.994.3.4.7.39.1.104 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 1 and 2. | |||||||||||||||||||||
| CpscheduleDConfigured2 | 1.3.6.1.4.1.994.3.4.7.39.1.105 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 2 and 3. | |||||||||||||||||||||
| CpscheduleDConfigured3 | 1.3.6.1.4.1.994.3.4.7.39.1.106 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule between time markers 3 and 4. | |||||||||||||||||||||
| CpscheduleDConfigured4 | 1.3.6.1.4.1.994.3.4.7.39.1.107 | ConfiguredState | RW | ||||||||||||||||||
column · ConfiguredState · read-write · current The state of the schedule at the end of the day. | |||||||||||||||||||||
| CpscheduleDTime0 | 1.3.6.1.4.1.994.3.4.7.39.1.108 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 0, the beginning of the day. | |||||||||||||||||||||
| CpscheduleDTime1 | 1.3.6.1.4.1.994.3.4.7.39.1.109 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 1. | |||||||||||||||||||||
| CpscheduleDTime2 | 1.3.6.1.4.1.994.3.4.7.39.1.110 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 2. | |||||||||||||||||||||
| CpscheduleDTime3 | 1.3.6.1.4.1.994.3.4.7.39.1.111 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 3. | |||||||||||||||||||||
| CpscheduleDTime4 | 1.3.6.1.4.1.994.3.4.7.39.1.112 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Time marker 4. | |||||||||||||||||||||
| CpscheduleDTime5 | 1.3.6.1.4.1.994.3.4.7.39.1.113 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Time marker 5, the end of the day. | |||||||||||||||||||||
| CpscheduleDIndex | 1.3.6.1.4.1.994.3.4.7.39.1.999 | Integer32 (1..7) | RO | ||||||||||||||||||
column · Integer32 (1..7) · read-only · current Index. | |||||||||||||||||||||
| Ntl1Settings | 1.3.6.1.4.1.994.3.4.7.40 | ||||||||||||||||||||
| Stl1SettingsTL1Issue | 1.3.6.1.4.1.994.3.4.7.40.123 | TL1Issue | RW | ||||||||||||||||||
scalar · TL1Issue · read-write · current (TL1) TL1 issue associated with this device. | |||||||||||||||||||||
| TpDCPFProtocolTable | 1.3.6.1.4.1.994.3.4.7.41 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of DCPFProtocol | |||||||||||||||||||||
| RpDCPFProtocolEntry | 1.3.6.1.4.1.994.3.4.7.41.1 | NA | |||||||||||||||||||
| CpDCPFProtocolDescription | 1.3.6.1.4.1.994.3.4.7.41.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the input device that DCPF will poll. | |||||||||||||||||||||
| CpDCPFProtocolConfigured | 1.3.6.1.4.1.994.3.4.7.41.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this input will be polled in DCPF. If set to false, it will not be polled. | |||||||||||||||||||||
| CpDCPFProtocolBaseDCPFDisplay | 1.3.6.1.4.1.994.3.4.7.41.1.127 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Base DCPF display for this input device. | |||||||||||||||||||||
| CpDCPFProtocolIndex | 1.3.6.1.4.1.994.3.4.7.41.1.999 | Integer32 (1..27) | RO | ||||||||||||||||||
column · Integer32 (1..27) · read-only · current Index. | |||||||||||||||||||||
| NdcpfSettings | 1.3.6.1.4.1.994.3.4.7.42 | ||||||||||||||||||||
| SdcpfSettingsDCPFAddress | 1.3.6.1.4.1.994.3.4.7.42.128 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Base DCPF Address. | |||||||||||||||||||||
| TpTABSProtocolTable | 1.3.6.1.4.1.994.3.4.7.43 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of TABSProtocol | |||||||||||||||||||||
| RpTABSProtocolEntry | 1.3.6.1.4.1.994.3.4.7.43.1 | NA | |||||||||||||||||||
| CpTABSProtocolDescription | 1.3.6.1.4.1.994.3.4.7.43.1.3 | DescriptionString | RO | ||||||||||||||||||
column · DescriptionString · read-only · current Description of the input device that TABS will poll. | |||||||||||||||||||||
| CpTABSProtocolConfigured | 1.3.6.1.4.1.994.3.4.7.43.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this input will be polled in TABS. If set to false, it will not be polled. | |||||||||||||||||||||
| CpTABSProtocolBaseTABSDisplay | 1.3.6.1.4.1.994.3.4.7.43.1.129 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Base TABS display for this input device. | |||||||||||||||||||||
| CpTABSProtocolIndex | 1.3.6.1.4.1.994.3.4.7.43.1.999 | Integer32 (1..27) | RO | ||||||||||||||||||
column · Integer32 (1..27) · read-only · current Index. | |||||||||||||||||||||
| NtabsSettings | 1.3.6.1.4.1.994.3.4.7.44 | ||||||||||||||||||||
| StabsSettingsTABSAddress | 1.3.6.1.4.1.994.3.4.7.44.130 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Base TABS Address. | |||||||||||||||||||||
| TpsnmpCommandsTable | 1.3.6.1.4.1.994.3.4.7.45 | NA | |||||||||||||||||||
table · not-accessible · current Table for configuration of snmpCommands | |||||||||||||||||||||
| RpsnmpCommandsEntry | 1.3.6.1.4.1.994.3.4.7.45.1 | NA | |||||||||||||||||||
| CpsnmpCommandsDescription | 1.3.6.1.4.1.994.3.4.7.45.1.3 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Name for this SNMP command. | |||||||||||||||||||||
| CpsnmpCommandsConfigured | 1.3.6.1.4.1.994.3.4.7.45.1.10 | Configured | RW | ||||||||||||||||||
column · Configured · read-write · current If set to true, this command will be sent for matching events. If set to false, it will not be sent. | |||||||||||||||||||||
| CpsnmpCommandsIpAddress | 1.3.6.1.4.1.994.3.4.7.45.1.14 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current Target (receiver) IP address of this SNMP command. | |||||||||||||||||||||
| CpsnmpCommandsGet | 1.3.6.1.4.1.994.3.4.7.45.1.39 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current SNMP community used with this command. | |||||||||||||||||||||
| CpsnmpCommandsSnmpVersion | 1.3.6.1.4.1.994.3.4.7.45.1.42 | SnmpVersion | RW | ||||||||||||||||||
column · SnmpVersion · read-write · current SNMP version to be used with this command. | |||||||||||||||||||||
| CpsnmpCommandsOutputAuto | 1.3.6.1.4.1.994.3.4.7.45.1.49 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Source alarm point for this SNMP command. | |||||||||||||||||||||
| CpsnmpCommandsOutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.45.1.71 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Package where the source alarm point is located. | |||||||||||||||||||||
| CpsnmpCommandsIPPortNum | 1.3.6.1.4.1.994.3.4.7.45.1.73 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Target (receiver) IP port of this SNMP command. | |||||||||||||||||||||
| CpsnmpCommandsOID | 1.3.6.1.4.1.994.3.4.7.45.1.132 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Target OID used with this command | |||||||||||||||||||||
| CpsnmpCommandsSNMPVarbindType | 1.3.6.1.4.1.994.3.4.7.45.1.134 | SNMPVarbindType | RW | ||||||||||||||||||
column · SNMPVarbindType · read-write · current Type of value sent to target, if this is a set command. | |||||||||||||||||||||
| CpsnmpCommandsTextNormal | 1.3.6.1.4.1.994.3.4.7.45.1.135 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Value sent to target for normal condition for a set command. | |||||||||||||||||||||
| CpsnmpCommandsTextCritical | 1.3.6.1.4.1.994.3.4.7.45.1.136 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Value sent to target for critical condition for a set command. | |||||||||||||||||||||
| CpsnmpCommandsTextMajor | 1.3.6.1.4.1.994.3.4.7.45.1.137 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Value sent to target for major condition for a set command. | |||||||||||||||||||||
| CpsnmpCommandsTextMinor | 1.3.6.1.4.1.994.3.4.7.45.1.138 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Value sent to target for minor condition for a set command. | |||||||||||||||||||||
| CpsnmpCommandsTextStatus | 1.3.6.1.4.1.994.3.4.7.45.1.139 | DescriptionString | RW | ||||||||||||||||||
column · DescriptionString · read-write · current Value sent to target for status condition for a set command. | |||||||||||||||||||||
| CpsnmpCommandsIndex | 1.3.6.1.4.1.994.3.4.7.45.1.999 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current Index. | |||||||||||||||||||||
| NbattMon | 1.3.6.1.4.1.994.3.4.7.46 | ||||||||||||||||||||
| SbattMonConfigured | 1.3.6.1.4.1.994.3.4.7.46.10 | Configured | RW | ||||||||||||||||||
scalar · Configured · read-write · current If set to true, this command will be sent for matching events. If set to false, it will not be sent. | |||||||||||||||||||||
| SbattMonOutputAuto | 1.3.6.1.4.1.994.3.4.7.46.49 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Source alarm point for this SNMP command. | |||||||||||||||||||||
| SbattMonOutputAutoPkg | 1.3.6.1.4.1.994.3.4.7.46.71 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current Package where the source alarm point is located. | |||||||||||||||||||||
| GconfigObjectGroup | 1.3.6.1.4.1.994.3.4.7.999 | ||||||||||||||||||||
group · current Description.
| |||||||||||||||||||||
| Ntriggers | 1.3.6.1.4.1.994.3.4.8 | ||||||||||||||||||||
| SresetDevice | 1.3.6.1.4.1.994.3.4.8.1 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Setting this item to true will cause a reset of the device. Setting this item to false will have no effect. | |||||||||||||||||||||
| ScommitAccountChanges | 1.3.6.1.4.1.994.3.4.8.2 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Setting this item to true will cause any user account changes to go into effect immediatly. Setting this item to false will have no effect. | |||||||||||||||||||||
| SresendEvents | 1.3.6.1.4.1.994.3.4.8.3 | Boolean | RW | ||||||||||||||||||
scalar · Boolean · read-write · current Setting this item to true will cause the device to resend traps for any standing alarms. Setting this item to false will have no effect. | |||||||||||||||||||||
Textual conventions
AnalogStateINTEGERhigh(1)highHigh(0)low(3)lowLow(4)medium(2)Defines states for an analog input.
BaudRateINTEGERbaud-1200(1200)baud-19200(19200)baud-2400(2400)baud-28800(28800)baud-300(300)baud-38400(38400)baud-4800(4800)baud-600(600)baud-9600(9600)Defines baud rates for serial communication.
BooleanINTEGERfalse(0)true(1)A type with only two states.
CameraStyleINTEGERaxis-210(5)axis-2100(2)axis-m1103(6)d-link-dcs1000(0)d-link-dcs2000(3)d-link-dcs5300(4)sony-snc-rz30n(1)Defines the different types of IP cameras supported.
ConfiguredINTEGERalways-in-use(1)not-in-use(0)schedule-a(2)schedule-b(3)schedule-c(4)schedule-d(5)In use
ConfiguredStateINTEGERdisabled(0)enabled(1)ConnectivityStateINTEGERoffline(1)online(0)Used for the state of a connection.
ContactStyleINTEGERdry-contact(0)wet-contact(1)Defines the different types of discrete alarm contacts.
DataBitsINTEGERdata-bits-7(7)data-bits-8(8)Defines the number of data bits in a byte for serial communication.
DayOfWeekINTEGERfriday(5)monday(1)saturday(6)sunday(0)thursday(4)tuesday(2)wednesday(3)Day of the week
DescriptionStringOCTET STRING (SIZE (0..80))A character string used for descriptions.
DigitalStateINTEGERoff(0)on(1)A type with only two states, used specifically to represent the state of a digital reading.
DiscreteFormulaINTEGERa-and-b(0)a-and-not-b(2)a-or-b(4)a-or-not-b(6)a-xor-b(8)a-xor-not-b(10)not-a-and-b(1)not-a-and-not-b(3)not-a-or-b(5)not-a-or-not-b(7)not-a-xor-b(9)not-a-xor-not-b(11)Defines the type of formula used for derived discretes.
EthernetRateINTEGERallow-100-mbps(0)force-10-mbps(1)Ethernet Rate
EthernetTypeINTEGERallow-full-duplex(0)force-half-duplex(1)Ethernet Type
IOFormatINTEGERonboard-built-in(8)rj(7)single-pin(0)single-pin-with-ground(1)three-pins(5)three-pins-right-to-left(6)two-pins(2)two-pins-right-to-left(4)two-pins-with-ground(3)Defines the physical pin layout of slot cards.
LevelINTEGERcritical(1)major(2)minor(3)normal(0)status(4)Describes a priority or level.
MODBUSCommandINTEGERread-holding-register(3)read-input-register(4)Function code
MeasureStyleINTEGERenglish(0)metric(1)Defines state of measurement style English or Metic.
OutputModeINTEGERautomatic(1)manual(0)Defines the different ways a control point can be activated.
OutputStateINTEGERclosed(1)open(0)Defines states for an output.
ParityINTEGEReven-parity(1)none(0)odd-parity(2)Defines the parity for serial communication.
PortTypeINTEGERcdma(6)dialup(3)e2a(5)edge(8)gps(7)iden(4)not-present(0)rs-232(1)rs-485(2)t202(9)Defines the type of serial port.
ProductTypeINTEGERwebmon-edge(0)webmon-matrix(1)Defines the type of device.
ProtocolINTEGERascii-log-single-line(10)command-line(1)configuration-menu(19)configuration-transfer(3)dcm-responder(9)dcpf-responder(16)e2a-host(11)gps-reader(12)ip-switchboard(4)lcd-protocol(17)modbus-interrogation(2)modem-mode(7)none(0)port-redirect(13)ppp-server(8)sensor-reader(14)tabs-responder(18)terminal-server(5)tl1-responder(15)user-login(6)Defines different protocols used for communication.
SNMPAccessINTEGERauthnopriv-md5(1)authnopriv-sha(3)authpriv-md5(2)authpriv-sha(4)noauthnopriv(0)Auth/Priv type
SNMPCommandTypeINTEGERget(160)set(163)Command type
SNMPVarbindTypeINTEGERinteger(2)string(4)Value type
SensorTypeINTEGERhumidity(2)raw(0)temperature(1)Sensor Type
SerialCTSINTEGERcts-ignore(0)cts-require(1)Defines the different CTS states for serial communication.
SerialRTSINTEGERrts-always-on(1)rts-never-on(0)rts-on-for-transmit(2)Defines the different RTS states for serial communication.
SlotIdINTEGERanalog-inputs(5)discrete-inputs(1)discrete-outputs(2)empty(0)onboard-sensors(4)sensor-inputs(7)serial-ports(3)switch-ports(6)Defines the different types of slot types available.
SnmpVersionINTEGERsnmpv1(0)snmpv2c(1)snmpv2c-inform(3)snmpv3(2)snmpv3-inform(4)Defines which version of SNMP is used for traps.
StopBitsINTEGERstop-bit-1(1)stop-bits-2(2)Defines the number of stop bits in a byte for serial communication.
TL1DirnINTEGERblank(0)na(3)rcv(2)trmt(1)Direction
TL1IssueINTEGERissue-3(3)issue-5(5)TL1 Issue
TL1LocnINTEGERblank(0)fend(2)line(3)nend(1)Location
TL1SrveffINTEGERblank(0)nsa(2)sa(1)Service Effecting
UseDialoutINTEGERalways(1)as-backup(2)never(0)Use Dialout
VoltageRangeINTEGERplus-minus-100-volts(100)sensor-port(5)Defines the valid voltage ranges.
Traps / Notifications
- analogEventTrap
1.3.6.1.4.1.994.3.4.6.1.1 - digitalEventTrap
1.3.6.1.4.1.994.3.4.6.2.1 - faultTrap
1.3.6.1.4.1.994.3.4.6.4.1 - remoteDeviceEventTrap
1.3.6.1.4.1.994.3.4.6.3.1