CUMULUS-BGPVRF-MIB
Cumulus Networks, incsnmptranslate -m CUMULUS-BGPVRF-MIB -Tpsnmpwalk -v2c -c <community> -m CUMULUS-BGPVRF-MIB <host> 1.3.6.1.4.1.40310.7Imports
| CUMULUS-SNMP-MIB | cumulusMib |
|---|---|
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressIPv6 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ibgp | 1.3.6.1.4.1.40310.7 | ||||||||||||||||||||
| SbgpVersion | 1.3.6.1.4.1.40310.7.1 | OCTET STRING (SIZE (1..255)) | RO | 10 | |||||||||||||||||
scalar · OCTET STRING (SIZE (1..255)) · read-only · current Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained within this object. The first octet contains bits 0 to 7, the second octet contains bits 8 to 15, and so on, with the most significant bit referring to the lowest bit number in the octet (e.g., the MSB of the first octet refers to bit 0). If a bit, i, is present and set, then the version (i+1) of the BGP is supported. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SbgpLocalAs | 1.3.6.1.4.1.40310.7.2 | INTEGER (0..65535) | RO | 65101 | |||||||||||||||||
scalar · INTEGER (0..65535) · read-only · current The local autonomous system number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NbgpOuterTable | 1.3.6.1.4.1.40310.7.3 | ||||||||||||||||||||
| TbgpPeerTable | 1.3.6.1.4.1.40310.7.3.1 | NA | |||||||||||||||||||
table · not-accessible · current BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. | |||||||||||||||||||||
| RbgpPeerEntry | 1.3.6.1.4.1.40310.7.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Entry containing information about the connection with a BGP peer.
| |||||||||||||||||||||
| CbgpPeerIdentifier | 1.3.6.1.4.1.40310.7.3.1.1.1 | IpAddress | RO | 10.10.10.2 | |||||||||||||||||
column · IpAddress · read-only · current The BGP Identifier of this entry's BGP peer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerState | 1.3.6.1.4.1.40310.7.3.1.1.2 | INTEGER | RO | established(6) | |||||||||||||||||
column · INTEGER · read-only · current The BGP peer connection state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerAdminStatus | 1.3.6.1.4.1.40310.7.3.1.1.3 | INTEGER | RO | start(2) | |||||||||||||||||
column · INTEGER · read-only · current The desired state of the BGP connection. A stop state means the session is administratively down, i.e. shutdown.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerNegotiatedVersion | 1.3.6.1.4.1.40310.7.3.1.1.4 | Integer32 | RO | 4 | |||||||||||||||||
column · Integer32 · read-only · current The negotiated version of BGP running between the two peers. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerLocalAddr | 1.3.6.1.4.1.40310.7.3.1.1.5 | InetAddress | RO | fe80::4ab0:2dff:fe00:1 | |||||||||||||||||
column · InetAddress · read-only · current The local IP address of this entry's BGP connection. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerLocalPort | 1.3.6.1.4.1.40310.7.3.1.1.6 | INTEGER (0..65535) | RO | 179 | |||||||||||||||||
column · INTEGER (0..65535) · read-only · current The local port for the TCP connection between the BGP peers. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerRemoteAddr | 1.3.6.1.4.1.40310.7.3.1.1.7 | InetAddress | RO | fe80::4ab0:2dff:fe00:259 | |||||||||||||||||
column · InetAddress · read-only · current The remote IP address of this entry's BGP peer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerRemotePort | 1.3.6.1.4.1.40310.7.3.1.1.8 | INTEGER (0..65535) | RO | 179 | |||||||||||||||||
column · INTEGER (0..65535) · read-only · current The remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerRemoteAs | 1.3.6.1.4.1.40310.7.3.1.1.9 | INTEGER (0..65535) | RO | 65102 | |||||||||||||||||
column · INTEGER (0..65535) · read-only · current The remote autonomous system number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerInUpdates | 1.3.6.1.4.1.40310.7.3.1.1.10 | Counter32 | RO | 1 | |||||||||||||||||
column · Counter32 · read-only · current The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerOutUpdates | 1.3.6.1.4.1.40310.7.3.1.1.11 | Counter32 | RO | 1 | |||||||||||||||||
column · Counter32 · read-only · current The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerInTotalMessages | 1.3.6.1.4.1.40310.7.3.1.1.12 | Counter32 | RO | 15 | |||||||||||||||||
column · Counter32 · read-only · current The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerOutTotalMessages | 1.3.6.1.4.1.40310.7.3.1.1.13 | Counter32 | RO | 17 | |||||||||||||||||
column · Counter32 · read-only · current The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerLastError | 1.3.6.1.4.1.40310.7.3.1.1.14 | OCTET STRING (SIZE (2)) | RO | 00:00 | |||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerFsmEstablishedTransitions | 1.3.6.1.4.1.40310.7.3.1.1.15 | Counter32 | RO | 2 | |||||||||||||||||
column · Counter32 · read-only · current The total number of times the BGP FSM transitioned into the established state. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerFsmEstablishedTime | 1.3.6.1.4.1.40310.7.3.1.1.16 | Gauge32 | RO | 29 | |||||||||||||||||
column · Gauge32 · read-only · current This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerConnectRetryInterval | 1.3.6.1.4.1.40310.7.3.1.1.17 | INTEGER (1..65535) | RW | 10 | |||||||||||||||||
column · INTEGER (1..65535) · read-write · current Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerHoldTime | 1.3.6.1.4.1.40310.7.3.1.1.18 | INTEGER (0 | 3..65535) | RO | 9 | |||||||||||||||||
column · INTEGER (0 | 3..65535) · read-only · current Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the value in bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message. This value must be at lease three seconds if it is not zero (0) in which case the Hold Timer has not been established with the peer, or, the value of bgpPeerHoldTimeConfigured is zero (0). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerKeepAlive | 1.3.6.1.4.1.40310.7.3.1.1.19 | INTEGER (0 | 1..21845) | RO | 3 | |||||||||||||||||
column · INTEGER (0 | 1..21845) · read-only · current Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with bgpPeerHoldTime, it has the same proportion as what bgpPeerKeepAliveConfigured has when compared with bgpPeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of bgpPeerKeepAliveConfigured is zero (0). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerHoldTimeConfigured | 1.3.6.1.4.1.40310.7.3.1.1.20 | INTEGER (0 | 3..65535) | RW | 9 | |||||||||||||||||
column · INTEGER (0 | 3..65535) · read-write · current Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (bgpPeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerKeepAliveConfigured | 1.3.6.1.4.1.40310.7.3.1.1.21 | INTEGER (0 | 1..21845) | RW | 3 | |||||||||||||||||
column · INTEGER (0 | 1..21845) · read-write · current Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of bgpPeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerMinRouteAdvertisementInterval | 1.3.6.1.4.1.40310.7.3.1.1.23 | INTEGER (1..65535) | RW | 0 | |||||||||||||||||
column · INTEGER (1..65535) · read-write · current Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerInUpdateElapsedTime | 1.3.6.1.4.1.40310.7.3.1.1.24 | Gauge32 | RO | 27 | |||||||||||||||||
column · Gauge32 · read-only · current Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is set to zero (0). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerIface | 1.3.6.1.4.1.40310.7.3.1.1.25 | DisplayString | RO | swp1 | |||||||||||||||||
column · DisplayString · read-only · current For BGP unnumbered neighbors routes are using interfaces as nexthop interfaces. This is the inteface from which nexthop route Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerDesc | 1.3.6.1.4.1.40310.7.3.1.1.26 | DisplayString | RO | NA | |||||||||||||||||
column · DisplayString · read-only · current This is neighbour or peer description field. It provides human readable info about neighbour or peer Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerIfindex | 1.3.6.1.4.1.40310.7.3.1.1.27 | INTEGER | RO | 3 | |||||||||||||||||
column · INTEGER · read-only · current Kernel ifIndex for interface-based BGP sessions. Value is 0 if not an interface-based session. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CbgpPeerIdType | 1.3.6.1.4.1.40310.7.3.1.1.28 | INTEGER | RO | interface(0) | |||||||||||||||||
column · INTEGER · read-only · current BGP session type carrying IPv4 Unicast address-family.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SbgpIdentifier | 1.3.6.1.4.1.40310.7.4 | IpAddress | RO | 10.10.10.1 | |||||||||||||||||
scalar · IpAddress · read-only · current The BGP Identifier of local system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Tbgp4PathAttrTable | 1.3.6.1.4.1.40310.7.5 | NA | |||||||||||||||||||
table · not-accessible · current The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers or locally originated. | |||||||||||||||||||||
| Rbgp4PathAttrEntry | 1.3.6.1.4.1.40310.7.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a path to a network. | |||||||||||||||||||||
| Cbgp4PathAttrPeer | 1.3.6.1.4.1.40310.7.5.1.1 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The IP address of the peer where the path information was learned. | |||||||||||||||||||||
| Cbgp4PathAttrIpAddrPrefixLen | 1.3.6.1.4.1.40310.7.5.1.2 | INTEGER (0..32) | RO | ||||||||||||||||||
column · INTEGER (0..32) · read-only · current Length in bits of the IP address prefix in the Network Layer Reachability Information field. | |||||||||||||||||||||
| Cbgp4PathAttrIpAddrPrefix | 1.3.6.1.4.1.40310.7.5.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgp4PathAttrIpAddrPrefixLen. Any bits beyond the length specified by bgp4PathAttrIpAddrPrefixLen are zeroed. | |||||||||||||||||||||
| Cbgp4PathAttrOrigin | 1.3.6.1.4.1.40310.7.5.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The ultimate origin of the path information.
| |||||||||||||||||||||
| Cbgp4PathAttrASPathSegment | 1.3.6.1.4.1.40310.7.5.1.5 | OCTET STRING (SIZE (2..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (2..255)) · read-only · current The sequence of AS path segments. Each AS
path segment is represented by a triple
<type, length, value>.
The type is a 1-octet field which has two
possible values:
1 AS_SET: unordered set of ASs a
route in the UPDATE
message has traversed
2 AS_SEQUENCE: ordered set of ASs
a route in the UPDATE
message has traversed.
The length is a 1-octet field containing the
number of ASs in the value field.
The value field contains one or more AS
numbers, each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255; | |||||||||||||||||||||
| Cbgp4PathAttrNextHop | 1.3.6.1.4.1.40310.7.5.1.6 | InetAddress | RO | ||||||||||||||||||
column · InetAddress · read-only · current The address of the border router that should be used for the destination network. | |||||||||||||||||||||
| Cbgp4PathAttrMultiExitDisc | 1.3.6.1.4.1.40310.7.5.1.7 | INTEGER (-1..2147483647) | RO | ||||||||||||||||||
column · INTEGER (-1..2147483647) · read-only · current This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute. | |||||||||||||||||||||
| Cbgp4PathAttrLocalPref | 1.3.6.1.4.1.40310.7.5.1.8 | INTEGER (-1..2147483647) | RO | ||||||||||||||||||
column · INTEGER (-1..2147483647) · read-only · current The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute. | |||||||||||||||||||||
| Cbgp4PathAttrAtomicAggregate | 1.3.6.1.4.1.40310.7.5.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Whether or not the local system has selected a less specific route without selecting a more specific route.
| |||||||||||||||||||||
| Cbgp4PathAttrAggregatorAS | 1.3.6.1.4.1.40310.7.5.1.10 | INTEGER (0..65535) | RO | ||||||||||||||||||
column · INTEGER (0..65535) · read-only · current The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. | |||||||||||||||||||||
| Cbgp4PathAttrAggregatorAddr | 1.3.6.1.4.1.40310.7.5.1.11 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. | |||||||||||||||||||||
| Cbgp4PathAttrCalcLocalPref | 1.3.6.1.4.1.40310.7.5.1.12 | INTEGER (-1..2147483647) | RO | ||||||||||||||||||
column · INTEGER (-1..2147483647) · read-only · current The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute. | |||||||||||||||||||||
| Cbgp4PathAttrBest | 1.3.6.1.4.1.40310.7.5.1.13 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of whether or not this route was chosen as the best BGP4 route.
| |||||||||||||||||||||
| Cbgp4PathAttrUnknown | 1.3.6.1.4.1.40310.7.5.1.14 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if any, are not recorded by this object. | |||||||||||||||||||||
| SbgpVrfTable | 1.3.6.1.4.1.40310.7.6 | INTEGER (0..65535) | RO | 254 | |||||||||||||||||
scalar · INTEGER (0..65535) · read-only · current VRF table Example values from LibreNMS test devices
| |||||||||||||||||||||
| SbgpVrfId | 1.3.6.1.4.1.40310.7.7 | INTEGER (0..65535) | RO | 0 | |||||||||||||||||
scalar · INTEGER (0..65535) · read-only · current VRF id Example values from LibreNMS test devices
| |||||||||||||||||||||
| SbgpVrfName | 1.3.6.1.4.1.40310.7.8 | DisplayString | RO | default | |||||||||||||||||
scalar · DisplayString · read-only · current VRF name Example values from LibreNMS test devices
| |||||||||||||||||||||
| NbgpTraps | 1.3.6.1.4.1.40310.7.9 | ||||||||||||||||||||
| !bgpEstablished | 1.3.6.1.4.1.40310.7.9.1 | ||||||||||||||||||||
notification · current The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
| |||||||||||||||||||||
| !bgpBackwardTransition | 1.3.6.1.4.1.40310.7.9.2 | ||||||||||||||||||||
notification · current The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
| |||||||||||||||||||||
Traps / Notifications
- bgpBackwardTransition
1.3.6.1.4.1.40310.7.9.2 - bgpEstablished
1.3.6.1.4.1.40310.7.9.1