HH3C-VBR-MIB
H3CThis MIB is used to manage port extenders (PEXs) over 802.1BR. This MIB is applicable to products that support PEXs.
snmptranslate -m HH3C-VBR-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-VBR-MIB <host> 1.3.6.1.4.1.25506.2.180Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cVbr | 1.3.6.1.4.1.25506.2.180 | |||
identity This MIB is used to manage port extenders (PEXs) over 802.1BR. This MIB is applicable to products that support PEXs. | ||||
| Nhh3cVbrSpecInfo | 1.3.6.1.4.1.25506.2.180.1 | |||
| Shh3cVbrGroupMinId | 1.3.6.1.4.1.25506.2.180.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Lowest PEX group ID that can be used to allocate ECIDs for ports on a PEX. | ||||
| Shh3cVbrGroupMaxId | 1.3.6.1.4.1.25506.2.180.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Highest PEX group ID that can be used to allocate ECID for ports on a PEX. | ||||
| Shh3cVbrMinAssociateId | 1.3.6.1.4.1.25506.2.180.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Lowest ID that can be assigned to a PEX. | ||||
| Shh3cVbrMaxAssociateId | 1.3.6.1.4.1.25506.2.180.1.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Highest ID that can be assigned to a PEX. | ||||
| Nhh3cVbrTable | 1.3.6.1.4.1.25506.2.180.2 | |||
| Thh3cVbrGroupTable | 1.3.6.1.4.1.25506.2.180.2.1 | NA | ||
table · not-accessible · current This table contains objects used to configure PEX groups. | ||||
| Rhh3cVbrGroupEntry | 1.3.6.1.4.1.25506.2.180.2.1.1 | NA | ||
| Chh3cVbrGroupId | 1.3.6.1.4.1.25506.2.180.2.1.1.1 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current ID that can be used to uniquely identify a PEX group. The value range is hh3cVbrGroupMinId to hh3cVbrGroupMaxId. | ||||
| Chh3cVbrGroupDescr | 1.3.6.1.4.1.25506.2.180.2.1.1.2 | DisplayString (SIZE (0..79)) | RC | |
column · DisplayString (SIZE (0..79)) · read-create · current Description for the PEX group. The default value is 'pex-group XXXX', where 'XXXX' is hh3cVbrGroupId. Writing a zero-length string to this object resets the value to the default. | ||||
| Chh3cVbrGroupRowStatus | 1.3.6.1.4.1.25506.2.180.2.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned. | ||||
| Thh3cVbrCasPortTable | 1.3.6.1.4.1.25506.2.180.2.2 | NA | ||
table · not-accessible · current This table contains objects used to configure PEX cascade ports. | ||||
| Rhh3cVbrCasPortEntry | 1.3.6.1.4.1.25506.2.180.2.2.1 | NA | ||
| Chh3cVbrCasPortIndex | 1.3.6.1.4.1.25506.2.180.2.2.1.1 | Integer32 (1..2147483647) | AN | |
column · Integer32 (1..2147483647) · accessible-for-notify · current Interface index of the cascade port for a PEX. | ||||
| Chh3cVbrCasPortAssociateId | 1.3.6.1.4.1.25506.2.180.2.2.1.2 | Integer32 (1..65535) | RC | |
column · Integer32 (1..65535) · read-create · current ID assigned to the PEX that is attached to the cascade port. The value range is hh3cVbrMinAssociateId to hh3cVbrMaxAssociateId. The value is 0xffff if the PEX is not assigned an ID. For a successful configuration, the ID must be unique among all PEXs in the IRF 3.1 system. | ||||
| Chh3cVbrCasPortGroupID | 1.3.6.1.4.1.25506.2.180.2.2.1.3 | Integer32 (1..2147483647) | RC | |
column · Integer32 (1..2147483647) · read-create · current PEX group ID assigned to the PEX that is attached to the cascade port. The value range is hh3cVbrGroupMinId to hh3cVbrGroupMaxId. | ||||
| Chh3cVbrPEXStatus | 1.3.6.1.4.1.25506.2.180.2.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the PEX. If the value is offline, the PEX is absent or its configuration is incomplete. If the value is online, the PEX is operating correctly.
| ||||
| Chh3cVbrPEXTier | 1.3.6.1.4.1.25506.2.180.2.2.1.5 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Tier of the PEX. The value is 0xffff if the upper-tier device of the PEX is not online. | ||||
| Chh3cVbrPEXDeviceMac | 1.3.6.1.4.1.25506.2.180.2.2.1.6 | DisplayString (SIZE (1..15)) | RO | |
column · DisplayString (SIZE (1..15)) · read-only · current Device MAC address of the PEX. | ||||
| Chh3cVbrPEXSysname | 1.3.6.1.4.1.25506.2.180.2.2.1.7 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current Device name of the PEX. | ||||
| Chh3cVbrPEXBoardType | 1.3.6.1.4.1.25506.2.180.2.2.1.8 | DisplayString (SIZE (1..64)) | RO | |
column · DisplayString (SIZE (1..64)) · read-only · current Device board type of the PEX. | ||||
| Chh3cVbrPEXParent | 1.3.6.1.4.1.25506.2.180.2.2.1.9 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current Upper-tier device of the PEX. The value is 0xffff if the upper-tier device of the PEX is the parent fabric(CB). In other situations, the value equals to the associated ID of the upper-tier PEX. | ||||
| Chh3cVbrCasPortRowStatus | 1.3.6.1.4.1.25506.2.180.2.2.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned. | ||||
| Thh3cVbrUpgradeTable | 1.3.6.1.4.1.25506.2.180.2.3 | NA | ||
table · not-accessible · current This table contains objects used to upgrade PEX software images or patches. | ||||
| Rhh3cVbrUpgradeEntry | 1.3.6.1.4.1.25506.2.180.2.3.1 | NA | ||
row · not-accessible · current Upgrade software for PEXs, including upgrading PEX software images by using an IPE file and installing or uninstalling PEX patches by using a patch file. Each time only one of the upgrading operations can be performed. The IPE file or the patch file must be saved in the flash:/pex_images directory on the parent fabric. | ||||
| Chh3cVbrUpgradeAssociateId | 1.3.6.1.4.1.25506.2.180.2.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current ID assigned to a PEX. The value range is hh3cVbrMinAssociateId to hh3cVbrMaxAssociateId. If the value is 0xffff,this object will upgrade software for all PEXs. | ||||
| Chh3cVbrUpgradeIPEFile | 1.3.6.1.4.1.25506.2.180.2.3.1.2 | DisplayString (SIZE (0..127)) | RW | |
column · DisplayString (SIZE (0..127)) · read-write · current The IPE file used to upgrade PEX software images. The file must be saved in the flash:/pex_images directory on the parent fabric. | ||||
| Chh3cVbrUpgradePatchFile | 1.3.6.1.4.1.25506.2.180.2.3.1.3 | DisplayString (SIZE (0..127)) | RW | |
column · DisplayString (SIZE (0..127)) · read-write · current The patch file used to install or uninstall PEX patches. The file must be saved in the flash:/pex_images directory on the parent fabric. | ||||
| Chh3cVbrUpgradePatchAction | 1.3.6.1.4.1.25506.2.180.2.3.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Action on patches in the patch file. The value active means to install the patches. The value deactive means to uninstall the patches.
| ||||
| Chh3cVbrUpgradeStatus | 1.3.6.1.4.1.25506.2.180.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Result of the upgrading operation.
| ||||
| Chh3cVbrInitUpgradeStatus | 1.3.6.1.4.1.25506.2.180.2.3.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current If you want to initialize the upgrade status, set the value of this object to enable. | ||||
| Nhh3cVbrTraps | 1.3.6.1.4.1.25506.2.180.3 | |||
| Nhh3cVbrTrapPrefix | 1.3.6.1.4.1.25506.2.180.3.0 | |||
| !hh3cVbrPEXRemoveOrInsert | 1.3.6.1.4.1.25506.2.180.3.0.1 | |||
notification · current An hh3cVbrPEXRemoveOrInsert notification is sent when a PEX is removed or inserted. | ||||
Traps / Notifications
- hh3cVbrPEXRemoveOrInsert
1.3.6.1.4.1.25506.2.180.3.0.1