HH3C-USERLOG-MIB
H3CThe HH3C-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature.
snmptranslate -m HH3C-USERLOG-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-USERLOG-MIB <host> 1.3.6.1.4.1.25506.8.18Imports
| HH3C-OID-MIB | hh3cRhw |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cUserLogMIB | 1.3.6.1.4.1.25506.8.18 | |||
identity The HH3C-USERLOG-MIB contains objects to Manage configuration and Monitor running state for userlog feature. | ||||
| Nhh3cUserlogObjects | 1.3.6.1.4.1.25506.8.18.1 | |||
| Nhh3cUserlogNatObjects | 1.3.6.1.4.1.25506.8.18.1.1 | |||
| Shh3cUserlogNatVersion | 1.3.6.1.4.1.25506.8.18.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current NAT LOG version. Currently only version 1 is developed. | ||||
| Shh3cUserlogNatSyslog | 1.3.6.1.4.1.25506.8.18.1.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current NAT LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. | ||||
| Shh3cUserlogNatSourceIP | 1.3.6.1.4.1.25506.8.18.1.1.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Source IP address of NAT LOG UDP packet. | ||||
| Shh3cUserlogNatFlowBegin | 1.3.6.1.4.1.25506.8.18.1.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Log the NAT flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required. | ||||
| Shh3cUserlogNatActiveTime | 1.3.6.1.4.1.25506.8.18.1.1.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The active time for long-time existed NAT flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, NAT flow can be logged after an interval of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled. | ||||
| Thh3cUserlogNatSlotCfgInfoTable | 1.3.6.1.4.1.25506.8.18.1.1.6 | NA | ||
table · not-accessible · current A table of NAT LOG configuration information for the specified slot. | ||||
| Rhh3cUserlogNatSlotCfgInfoEntry | 1.3.6.1.4.1.25506.8.18.1.1.6.1 | NA | ||
row · not-accessible · current NAT LOG Configuration Information Entry for a slot. | ||||
| Chh3cUserlogNatCfgSlotNumber | 1.3.6.1.4.1.25506.8.18.1.1.6.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current Slot number. Specify which slot is configured with NAT LOG. | ||||
| Chh3cUserlogNatEnable | 1.3.6.1.4.1.25506.8.18.1.1.6.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The NAT LOG feature Enable status. If 1, NAT LOG is enbled. If 0, NAT LOG is disabled. | ||||
| Chh3cUserlogNatAclNumber | 1.3.6.1.4.1.25506.8.18.1.1.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Access-list number. The value 0 means no ACL is specified. Only when NAT LOG is enabled, can ACL be configured. Only NAT flow which match the ACL will be logged. | ||||
| Chh3cUserlogNatHostAddress | 1.3.6.1.4.1.25506.8.18.1.1.6.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of NAT LOG server. | ||||
| Chh3cUserlogNatUdpPort | 1.3.6.1.4.1.25506.8.18.1.1.6.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The UDP Port Number of NAT LOG UDP packet. | ||||
| Thh3cUserlogNatSlotRunInfoTable | 1.3.6.1.4.1.25506.8.18.1.1.7 | NA | ||
table · not-accessible · current A table of NAT LOG running information for the specified slot. | ||||
| Rhh3cUserlogNatSlotRunInfoEntry | 1.3.6.1.4.1.25506.8.18.1.1.7.1 | NA | ||
row · not-accessible · current NAT LOG Running Information Entry for a slot. | ||||
| Chh3cUserlogNatRunSlotNumber | 1.3.6.1.4.1.25506.8.18.1.1.7.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current Slot number. Specify on which slot the NAT LOG statistics displayed. | ||||
| Chh3cUserlogNatTotalEntries | 1.3.6.1.4.1.25506.8.18.1.1.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of NAT flow entries which are logged. | ||||
| Chh3cUserlogNatTotalPackets | 1.3.6.1.4.1.25506.8.18.1.1.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of NAT LOG UDP packets generated by the router. | ||||
| Chh3cUserlogNatFailedEntries | 1.3.6.1.4.1.25506.8.18.1.1.7.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of NAT flow entries failed in outputting. | ||||
| Chh3cUserlogNatFailedPackets | 1.3.6.1.4.1.25506.8.18.1.1.7.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of NAT LOG UDP packets failed in outputting. | ||||
| Chh3cUserlogNatClearRunStat | 1.3.6.1.4.1.25506.8.18.1.1.7.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Clear the running statistics for NAT LOG. Write-only. If 1, the running statistics for NAT LOG is resetted. Other value is invalid. | ||||
| Nhh3cUserlogFlowObjects | 1.3.6.1.4.1.25506.8.18.1.2 | |||
| Shh3cUserlogFlowVersion | 1.3.6.1.4.1.25506.8.18.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current BAS FLOW LOG version. Currently only version 1 is developed. | ||||
| Shh3cUserlogFlowSyslog | 1.3.6.1.4.1.25506.8.18.1.2.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current BAS FLOW LOG format. If 1, LOG format is sysLog. If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. | ||||
| Shh3cUserlogFlowSourceIP | 1.3.6.1.4.1.25506.8.18.1.2.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Source IP address of BAS FLOW LOG UDP packet. | ||||
| Shh3cUserlogFlowFlowBegin | 1.3.6.1.4.1.25506.8.18.1.2.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current Log the BAS flow when it is created. If 1, this function is enabled. If 0, this function is disabled. This function will be used when real-time monitor required. | ||||
| Shh3cUserlogFlowActiveTime | 1.3.6.1.4.1.25506.8.18.1.2.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The active time for long-time existed BAS flow. Unit: minute. Range: 10 minutes ~ 120 minutes. When setting it, BAS flow can be logged after an internal of active time. This function will be used when real-time monitor required. The default value 0 means real-time monitor function is disabled. | ||||
| Thh3cUserlogFlowSlotCfgInfoTable | 1.3.6.1.4.1.25506.8.18.1.2.6 | NA | ||
table · not-accessible · current A table of BAS FLOW LOG configuration information for the specified slot. | ||||
| Rhh3cUserlogFlowSlotCfgInfoEntry | 1.3.6.1.4.1.25506.8.18.1.2.6.1 | NA | ||
row · not-accessible · current BAS FLOW LOG Configuration Information Entry for a slot. | ||||
| Chh3cUserlogFlowCfgSlotNumber | 1.3.6.1.4.1.25506.8.18.1.2.6.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current Slot number. Specify which slot is configured with BAS FLOW LOG. | ||||
| Chh3cUserlogFlowEnable | 1.3.6.1.4.1.25506.8.18.1.2.6.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The BAS FLOW LOG feature Enable status. If 1, BAS FLOW LOG is enbled. If 0, BAS FLOW LOG is disabled. | ||||
| Chh3cUserlogFlowAclNumber | 1.3.6.1.4.1.25506.8.18.1.2.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current Access-list number. The value 0 means no ACL is specified. Only when BAS FLOW LOG is enabled, can ACL be configured. Only BAS flow which match the ACL will be logged. | ||||
| Chh3cUserlogFlowHostAddress | 1.3.6.1.4.1.25506.8.18.1.2.6.1.4 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of BAS FLOW LOG server. | ||||
| Chh3cUserlogFlowUdpPort | 1.3.6.1.4.1.25506.8.18.1.2.6.1.5 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The UDP Port Number of BAS FLOW LOG UDP packet. | ||||
| Thh3cUserlogFlowSlotRunInfoTable | 1.3.6.1.4.1.25506.8.18.1.2.7 | NA | ||
table · not-accessible · current A table of BAS FLOW LOG running information for the specified slot. | ||||
| Rhh3cUserlogFlowSlotRunInfoEntry | 1.3.6.1.4.1.25506.8.18.1.2.7.1 | NA | ||
row · not-accessible · current Running Information Entry for a slot. | ||||
| Chh3cUserlogFlowRunSlotNumber | 1.3.6.1.4.1.25506.8.18.1.2.7.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current Slot number. Specify on which slot the BAS FLOW LOG statistics displayed. | ||||
| Chh3cUserlogFlowTotalEntries | 1.3.6.1.4.1.25506.8.18.1.2.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BAS FLOW Entries which are logged. | ||||
| Chh3cUserlogFlowTotalPackets | 1.3.6.1.4.1.25506.8.18.1.2.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of FLOW LOG UDP packet generated by the router. | ||||
| Chh3cUserlogFlowFailedEntries | 1.3.6.1.4.1.25506.8.18.1.2.7.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BAS FLOW entries failed in outputting. | ||||
| Chh3cUserlogFlowFailedPackets | 1.3.6.1.4.1.25506.8.18.1.2.7.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BAS FLOW LOG UDP packet failed in outputting. | ||||
| Chh3cUserlogFlowClearRunStat | 1.3.6.1.4.1.25506.8.18.1.2.7.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Clear the running statistics for FLOW LOG. Write-only. If 1, the running statistics for FLOW LOG is resetted. Other value is invalid. | ||||
| Nhh3cUserlogAccessObjects | 1.3.6.1.4.1.25506.8.18.1.3 | |||
| Shh3cUserlogAccessVersion | 1.3.6.1.4.1.25506.8.18.1.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current BAS ACCESS LOG version. Currently only version 1 is developed. | ||||
| Shh3cUserlogAccessSyslog | 1.3.6.1.4.1.25506.8.18.1.3.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current BAS ACCESS LOG format. If 1, LOG format is sysLog; If 0, LOG format is UDP packet. UDP packet is the default format, and is recommended. | ||||
| Shh3cUserlogAccessSourceIP | 1.3.6.1.4.1.25506.8.18.1.3.3 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Source IP address of BAS ACCESS LOG UDP packet. | ||||
| Thh3cUserlogAccessSlotCfgInfoTable | 1.3.6.1.4.1.25506.8.18.1.3.4 | NA | ||
table · not-accessible · current A table of BAS ACCESS LOG configuration information for the specified slot. | ||||
| Rhh3cUserlogAccessSlotCfgInfoEntry | 1.3.6.1.4.1.25506.8.18.1.3.4.1 | NA | ||
row · not-accessible · current BAS ACCESS LOG Configuration Information Entry for a slot. | ||||
| Chh3cUserlogAccessCfgSlotNumber | 1.3.6.1.4.1.25506.8.18.1.3.4.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current Slot number. Specify which slot is configured with BAS ACCESS LOG. | ||||
| Chh3cUserlogAccessEnable | 1.3.6.1.4.1.25506.8.18.1.3.4.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The BAS ACCESS LOG feature Enable status. If 1, BAS ACCESS LOG is enbled. If 0, BAS ACCESS LOG is disabled. | ||||
| Chh3cUserlogAccessHostAddress | 1.3.6.1.4.1.25506.8.18.1.3.4.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of BAS ACCESS LOG server. | ||||
| Chh3cUserlogAccessUdpPort | 1.3.6.1.4.1.25506.8.18.1.3.4.1.4 | Integer32 (0..65535) | RW | |
column · Integer32 (0..65535) · read-write · current The UDP Port Number of BAS ACCESS LOG UDP packet. | ||||
| Thh3cUserlogAccessSlotRunInfoTable | 1.3.6.1.4.1.25506.8.18.1.3.5 | NA | ||
table · not-accessible · current A table of BAS ACCESS LOG running information for the specified slot. | ||||
| Rhh3cUserlogAccessSlotRunInfoEntry | 1.3.6.1.4.1.25506.8.18.1.3.5.1 | NA | ||
row · not-accessible · current Running Information Entry for a slot. | ||||
| Chh3cUserlogAccessRunSlotNumber | 1.3.6.1.4.1.25506.8.18.1.3.5.1.1 | Integer32 (0..15) | RO | |
column · Integer32 (0..15) · read-only · current Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed. | ||||
| Chh3cUserlogAccessTotalEntries | 1.3.6.1.4.1.25506.8.18.1.3.5.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BAS ACCESS Records which are logged. | ||||
| Chh3cUserlogAccessTotalPackets | 1.3.6.1.4.1.25506.8.18.1.3.5.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of ACCESS LOG UDP packet generated by the router. | ||||
| Chh3cUserlogAccessFailedEntries | 1.3.6.1.4.1.25506.8.18.1.3.5.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BAS ACCESS entries failed in outputting. | ||||
| Chh3cUserlogAccessFailedPackets | 1.3.6.1.4.1.25506.8.18.1.3.5.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of BAS ACCESS LOG UDP packet failed in outputting. | ||||
| Chh3cUserlogAccessClearRunStat | 1.3.6.1.4.1.25506.8.18.1.3.5.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Clear the running statistics for ACCESS LOG. Write-only. If 1, the running statistics for ACCESS LOG is resetted. Other value is invalid. | ||||
| Nhh3cUserlogNotifications | 1.3.6.1.4.1.25506.8.18.2 | |||
| Nhh3cUserlogConformance | 1.3.6.1.4.1.25506.8.18.3 | |||
| Nhh3cUserlogCompliances | 1.3.6.1.4.1.25506.8.18.3.1 | |||
| Mhh3cUserlogCompliance | 1.3.6.1.4.1.25506.8.18.3.1.1 | |||
compliance · current The compliance statement for entities which implement the Userlog mib.
| ||||
| Nhh3cUserlogGroups | 1.3.6.1.4.1.25506.8.18.3.2 | |||
| Ghh3cUserlogMandatoryGroup | 1.3.6.1.4.1.25506.8.18.3.2.1 | |||
group · current A collection of objects providing mandatory Userlog information. | ||||
| Ghh3cUserlogConfigGroup | 1.3.6.1.4.1.25506.8.18.3.2.2 | |||
group · current All configurable parameters of Userlog feature.
| ||||
| Ghh3cUserlogInfoGroup | 1.3.6.1.4.1.25506.8.18.3.2.3 | |||
group · current All running information of Userlog feature.
| ||||