HH3C-STORAGE-SNAP-MIB
H3CThis MIB describes the general information about snap of storage device.
snmptranslate -m HH3C-STORAGE-SNAP-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-STORAGE-SNAP-MIB <host> 1.3.6.1.4.1.25506.10.2Imports
| ENTITY-MIB | entPhysicalIndex |
|---|---|
| HH3C-STORAGE-REF-MIB | Hh3cExtendSelectPolicy, Hh3cLvIDType, Hh3cRaidIDType, Hh3cStorageActionType, Hh3cStorageEnableState, Hh3cStorageOnlineState, hh3cStorageRef |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cStorageSnap | 1.3.6.1.4.1.25506.10.2 | |||
identity This MIB describes the general information about snap of storage device. | ||||
| Nhh3cSnapMibObjects | 1.3.6.1.4.1.25506.10.2.1 | |||
| Nhh3cGlobalSnapSettingsObject | 1.3.6.1.4.1.25506.10.2.1.1 | |||
| Shh3cAddtionalSpaceMaxSize | 1.3.6.1.4.1.25506.10.2.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource .
| ||||
| Thh3cSnapConfigTable | 1.3.6.1.4.1.25506.10.2.1.2 | NA | ||
table · not-accessible · current This table contains some entity to config the snapshot resources for special logic volumes. | ||||
| Rhh3cSnapConfigEntry | 1.3.6.1.4.1.25506.10.2.1.2.1 | NA | ||
row · not-accessible · current An entry containing configuration about the snapshot resource.
| ||||
| Chh3cSnapLvIndex | 1.3.6.1.4.1.25506.10.2.1.2.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This object identifies the index of hh3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of hh3cLvIndex. | ||||
| Chh3cSnapAreaId | 1.3.6.1.4.1.25506.10.2.1.2.1.2 | Hh3cLvIDType | RO | |
column · Hh3cLvIDType · read-only · current This object identifies the snapshot resource of the logic volume. | ||||
| Chh3cSnapAreaAutoExpand | 1.3.6.1.4.1.25506.10.2.1.2.1.3 | Hh3cStorageEnableState | RC | |
column · Hh3cStorageEnableState · read-create · current This object describes if the space of snapshot resource can be expanded automatically. | ||||
| Chh3cSnapAreaThreshold | 1.3.6.1.4.1.25506.10.2.1.2.1.4 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaThreshold' means the threshold of the snapshot resource. | ||||
| Chh3cSnapAreaIncSize | 1.3.6.1.4.1.25506.10.2.1.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the amount of space to be allocated for each expansion.
| ||||
| Chh3cSnapAreaMaxSize | 1.3.6.1.4.1.25506.10.2.1.2.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current If hh3cSnapAreaAutoExpand is selected, the 'hh3cSnapAreaIncSize' means the max size of snapshot resource.
| ||||
| Chh3cSnapAreaFullDeleteTM | 1.3.6.1.4.1.25506.10.2.1.2.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not.
| ||||
| Chh3cSnapAreaNotify | 1.3.6.1.4.1.25506.10.2.1.2.1.8 | Hh3cStorageEnableState | RC | |
column · Hh3cStorageEnableState · read-create · current This object describes if a snapshot notification should be send to the client when the system create a timemark. | ||||
| Chh3cSnapAreaStatus | 1.3.6.1.4.1.25506.10.2.1.2.1.9 | Hh3cStorageOnlineState | RO | |
column · Hh3cStorageOnlineState · read-only · current This object describes the state of the snapshot resource. | ||||
| Chh3cSnapRaidUuid | 1.3.6.1.4.1.25506.10.2.1.2.1.10 | Hh3cRaidIDType | RC | |
column · Hh3cRaidIDType · read-create · current This object describes the raid where the snapshot resource is created. | ||||
| Chh3cSnapRaidSize | 1.3.6.1.4.1.25506.10.2.1.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the size designated when the snapshot resource is created.
| ||||
| Chh3cSnapRaidSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.2.1.12 | Hh3cExtendSelectPolicy | RC | |
column · Hh3cExtendSelectPolicy · read-create · current This object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated hh3cSnapRaidUuid object is equal to null. | ||||
| Chh3cSnapAreaTotalSize | 1.3.6.1.4.1.25506.10.2.1.2.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the current total size of the snapshot resource.
| ||||
| Chh3cSnapAreaFreeSize | 1.3.6.1.4.1.25506.10.2.1.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the free size of the snapshot resource.
| ||||
| Chh3cSnapExtendTimes | 1.3.6.1.4.1.25506.10.2.1.2.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the times the snapshot resource extended. | ||||
| Chh3cSnapRowStatus | 1.3.6.1.4.1.25506.10.2.1.2.1.16 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled. | ||||
| Thh3cSnapExpandTable | 1.3.6.1.4.1.25506.10.2.1.3 | NA | ||
table · not-accessible · current This table contains some entity to expand a snapshot resource. | ||||
| Rhh3cSnapExpandEntry | 1.3.6.1.4.1.25506.10.2.1.3.1 | NA | ||
row · not-accessible · current An entry containing expand information applicable to the snapshot resource. | ||||
| Chh3cSAExpRaidUuid | 1.3.6.1.4.1.25506.10.2.1.3.1.1 | Hh3cRaidIDType | NA | |
column · Hh3cRaidIDType · not-accessible · current This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | ||||
| Chh3cSAExpSize | 1.3.6.1.4.1.25506.10.2.1.3.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current This object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read.
| ||||
| Chh3cSAExpRaidSize | 1.3.6.1.4.1.25506.10.2.1.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read.
| ||||
| Chh3cSnapAreaExpRowStatus | 1.3.6.1.4.1.25506.10.2.1.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object describes the actions to expand the size for snap. | ||||
| Thh3cSnapCopyTable | 1.3.6.1.4.1.25506.10.2.1.4 | NA | ||
table · not-accessible · current This table contains some entity about snapshot copy. | ||||
| Rhh3cSnapCopyEntry | 1.3.6.1.4.1.25506.10.2.1.4.1 | NA | ||
row · not-accessible · current An entry containing snapshot copy information applicable.
| ||||
| Chh3cSnapCopyLvIndex | 1.3.6.1.4.1.25506.10.2.1.4.1.1 | Hh3cLvIDType | RW | |
column · Hh3cLvIDType · read-write · current This object identifies the index of destination logic volume for snapshot copy. | ||||
| Chh3cSnapCopyPercentage | 1.3.6.1.4.1.25506.10.2.1.4.1.2 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'. | ||||
| Chh3cSnapCopyStartTime | 1.3.6.1.4.1.25506.10.2.1.4.1.3 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object identifies the time to start the snapshot copy. | ||||
| Chh3cSnapCopySwitch | 1.3.6.1.4.1.25506.10.2.1.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent.
| ||||
| Thh3cTimeMarkConfigTable | 1.3.6.1.4.1.25506.10.2.1.5 | NA | ||
table · not-accessible · current This table contains some entity to config a TimeMark on a special logic volume. | ||||
| Rhh3cTimeMarkConfigEntry | 1.3.6.1.4.1.25506.10.2.1.5.1 | NA | ||
row · not-accessible · current An entry containing config information applicable to the TimeMark.
| ||||
| Chh3cTimeMarkCounts | 1.3.6.1.4.1.25506.10.2.1.5.1.1 | Integer32 (1..255) | RW | |
column · Integer32 (1..255) · read-write · current This object identifies the max num of TimeMark which can be configed. | ||||
| Chh3cTimeMarkInitializeTime | 1.3.6.1.4.1.25506.10.2.1.5.1.2 | DateAndTime | RW | |
column · DateAndTime · read-write · current This object identifies the date and time when the first TimeMark is created on the logic volume. | ||||
| Chh3cTimeMarkInterval | 1.3.6.1.4.1.25506.10.2.1.5.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current This object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds. | ||||
| Chh3cTimeMarkLastTime | 1.3.6.1.4.1.25506.10.2.1.5.1.4 | DateAndTime | RW | |
column · DateAndTime · read-write · current This object identifies the date and time when the latest TimeMark is created on the logic volume. | ||||
| Chh3cTimeMarkTotal | 1.3.6.1.4.1.25506.10.2.1.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the current num of TimeMark. | ||||
| Chh3cTimeMarkSwitch | 1.3.6.1.4.1.25506.10.2.1.5.1.6 | Hh3cStorageEnableState | RC | |
column · Hh3cStorageEnableState · read-create · current This object describes enable or disable TimeMark. | ||||
| Thh3cTimeMarkCreateTable | 1.3.6.1.4.1.25506.10.2.1.6 | NA | ||
table · not-accessible · current This table contains some entity to create a TimeMark on a special logic volume. | ||||
| Rhh3cTimeMarkCreateEntry | 1.3.6.1.4.1.25506.10.2.1.6.1 | NA | ||
row · not-accessible · current An entry containing create information applicable to the TimeMark. | ||||
| Chh3cTimeMarkStamp | 1.3.6.1.4.1.25506.10.2.1.6.1.1 | DateAndTime | NA | |
column · DateAndTime · not-accessible · current This object identifies the date and time the TimeMark is created. | ||||
| Chh3cTimeMarkComment | 1.3.6.1.4.1.25506.10.2.1.6.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object identifies the comment of the TimeMark. | ||||
| Chh3cTimeMarkSize | 1.3.6.1.4.1.25506.10.2.1.6.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the current size of the TimeMark.
| ||||
| Chh3cTimeMarkRowStatus | 1.3.6.1.4.1.25506.10.2.1.6.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using. | ||||
| Thh3cTimeMarkCopyTable | 1.3.6.1.4.1.25506.10.2.1.7 | NA | ||
table · not-accessible · current This table contains some entity about a TimeMark copy. | ||||
| Rhh3cTimeMarkCopyEntry | 1.3.6.1.4.1.25506.10.2.1.7.1 | NA | ||
row · not-accessible · current An entry containing config information applicable to the TimeMark copy. | ||||
| Chh3cTMCopyDestLvId | 1.3.6.1.4.1.25506.10.2.1.7.1.1 | Hh3cLvIDType | RO | |
column · Hh3cLvIDType · read-only · current This object identifies the index of destination logic volume for TimeMark copy. | ||||
| Chh3cTMCopyPercentage | 1.3.6.1.4.1.25506.10.2.1.7.1.2 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'. | ||||
| Chh3cTMCopyStartTime | 1.3.6.1.4.1.25506.10.2.1.7.1.3 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object identifies the time to start the TimeMark copy. | ||||
| Chh3cTMCopySwitch | 1.3.6.1.4.1.25506.10.2.1.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current This object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get.
| ||||
| Thh3cTimeMarkRollbackTable | 1.3.6.1.4.1.25506.10.2.1.8 | NA | ||
table · not-accessible · current This table contains some entity to use a TimeMark to rollback the logic volume. | ||||
| Rhh3cTimeMarkRollbackEntry | 1.3.6.1.4.1.25506.10.2.1.8.1 | NA | ||
row · not-accessible · current An entry containing config information applicable to use a TimeMark to rollback the logic volume. | ||||
| Chh3cTMRollbackPercentage | 1.3.6.1.4.1.25506.10.2.1.8.1.1 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This object identifies the percentage of rollback. | ||||
| Chh3cTMRollbackStartTime | 1.3.6.1.4.1.25506.10.2.1.8.1.2 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object identifies the time to start the rollback. | ||||
| Chh3cTMRollbackSwitch | 1.3.6.1.4.1.25506.10.2.1.8.1.3 | Hh3cStorageActionType | RW | |
column · Hh3cStorageActionType · read-write · current This object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted. | ||||
| Thh3cTimeViewTable | 1.3.6.1.4.1.25506.10.2.1.9 | NA | ||
table · not-accessible · current This table contains some entity to config a TimeView on a special TimeMark. | ||||
| Rhh3cTimeViewEntry | 1.3.6.1.4.1.25506.10.2.1.9.1 | NA | ||
row · not-accessible · current An entry containing config information applicable to the TimeView. | ||||
| Chh3cTimeViewStamp | 1.3.6.1.4.1.25506.10.2.1.9.1.1 | DateAndTime | NA | |
column · DateAndTime · not-accessible · current This object identifies the TimeView. The object identified by this index is the same object as identified by the same value of hh3cTimeMarkStamp. | ||||
| Chh3cTimeViewID | 1.3.6.1.4.1.25506.10.2.1.9.1.2 | Hh3cLvIDType | RO | |
column · Hh3cLvIDType · read-only · current This object identifies the TimeView. | ||||
| Chh3cTimeViewName | 1.3.6.1.4.1.25506.10.2.1.9.1.3 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current This object identifies the name of the TimeView. | ||||
| Chh3cTimeViewRowStatus | 1.3.6.1.4.1.25506.10.2.1.9.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object describes the actions to create or delete the TimeView. | ||||
| Thh3cReplicaConfigTable | 1.3.6.1.4.1.25506.10.2.1.10 | NA | ||
table · not-accessible · current This table contains some entity to config replication for a logic volume. | ||||
| Rhh3cReplicaConfigEntry | 1.3.6.1.4.1.25506.10.2.1.10.1 | NA | ||
row · not-accessible · current An entry containing config information applicable to the replication for a logic volume.
| ||||
| Chh3cRepLocalLvIndex | 1.3.6.1.4.1.25506.10.2.1.10.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of hh3cSnapLvIndex. | ||||
| Chh3cLvRepLocalWay | 1.3.6.1.4.1.25506.10.2.1.10.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The value of 'outgoing' means the hh3cRepLocalLvIndex is the primary logic volume of replication, and the hh3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the hh3cRepLocalLvIndex is the replica logic volume of replication. , and the hh3cRepRemoteLvIndex is the primary logic volume.
| ||||
| Chh3cRepLocalServerIP | 1.3.6.1.4.1.25506.10.2.1.10.1.3 | InetAddress | RC | |
column · InetAddress · read-create · current This object identifies the ip address of local server. | ||||
| Chh3cRepLocalServerIPType | 1.3.6.1.4.1.25506.10.2.1.10.1.4 | InetAddressType | RC | |
column · InetAddressType · read-create · current This object identifies the ip address type of local server. | ||||
| Chh3cRepLocalServerName | 1.3.6.1.4.1.25506.10.2.1.10.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object identifies the name of local server. | ||||
| Chh3cRepLocalServerUsername | 1.3.6.1.4.1.25506.10.2.1.10.1.6 | OCTET STRING (SIZE (1..32)) | RC | |
column · OCTET STRING (SIZE (1..32)) · read-create · current This object identifies the username of local server. | ||||
| Chh3cRepLocalServerPassword | 1.3.6.1.4.1.25506.10.2.1.10.1.7 | OCTET STRING (SIZE (1..127)) | RC | |
column · OCTET STRING (SIZE (1..127)) · read-create · current This object identifies the password of local server. | ||||
| Chh3cRepRemoteServerIP | 1.3.6.1.4.1.25506.10.2.1.10.1.8 | InetAddress | RC | |
column · InetAddress · read-create · current This object identifies the ip address of remote server. | ||||
| Chh3cRepRemoteServerIPType | 1.3.6.1.4.1.25506.10.2.1.10.1.9 | InetAddressType | RC | |
column · InetAddressType · read-create · current This object identifies the ip address type of remote server. | ||||
| Chh3cRepRemoteServerName | 1.3.6.1.4.1.25506.10.2.1.10.1.10 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This object identifies the name of remote server. | ||||
| Chh3cRepRemoteServerUsername | 1.3.6.1.4.1.25506.10.2.1.10.1.11 | OCTET STRING (SIZE (1..32)) | RC | |
column · OCTET STRING (SIZE (1..32)) · read-create · current This object identifies the username of remote server. | ||||
| Chh3cRepRemoteServerPassword | 1.3.6.1.4.1.25506.10.2.1.10.1.12 | OCTET STRING (SIZE (1..127)) | RC | |
column · OCTET STRING (SIZE (1..127)) · read-create · current This object identifies the password of remote server. | ||||
| Chh3cRepRemoteLvIndex | 1.3.6.1.4.1.25506.10.2.1.10.1.13 | Hh3cLvIDType | RC | |
column · Hh3cLvIDType · read-create · current This object identifies the logic volume of remote server. | ||||
| Chh3cReplicaMode | 1.3.6.1.4.1.25506.10.2.1.10.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'.
| ||||
| Chh3cReplicaWatermark | 1.3.6.1.4.1.25506.10.2.1.10.1.15 | Integer32 | RC | |
column · Integer32 · read-create · current This object identifies the size of watermark which means a replication is scheduled.
| ||||
| Chh3cReplicaWatermarkRetry | 1.3.6.1.4.1.25506.10.2.1.10.1.16 | Integer32 | RC | |
column · Integer32 · read-create · current If the 'hh3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute. | ||||
| Chh3cReplicaInitializeTime | 1.3.6.1.4.1.25506.10.2.1.10.1.17 | DateAndTime | RC | |
column · DateAndTime · read-create · current This object identifies the time to start an initial replication. | ||||
| Chh3cReplicaInterval | 1.3.6.1.4.1.25506.10.2.1.10.1.18 | Integer32 | RC | |
column · Integer32 · read-create · current This object identifies how often the replication should be repeated after initial replication. The units is minute. | ||||
| Chh3cReplicaEncrypt | 1.3.6.1.4.1.25506.10.2.1.10.1.19 | Hh3cStorageEnableState | RC | |
column · Hh3cStorageEnableState · read-create · current This object identifies the encrypt option is enable or diable. | ||||
| Chh3cReplicaCompress | 1.3.6.1.4.1.25506.10.2.1.10.1.20 | Hh3cStorageEnableState | RC | |
column · Hh3cStorageEnableState · read-create · current This object identifies the compress option is enable or diable. | ||||
| Chh3cReplicaUseExistTM | 1.3.6.1.4.1.25506.10.2.1.10.1.21 | Hh3cStorageEnableState | RC | |
column · Hh3cStorageEnableState · read-create · current This object identifies if using the exist TimeMark to replicate or not. | ||||
| Chh3cReplicaProtocol | 1.3.6.1.4.1.25506.10.2.1.10.1.22 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol.
| ||||
| Chh3cReplicaScanDiff | 1.3.6.1.4.1.25506.10.2.1.10.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current This object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized. | ||||
| Chh3cReplicaStatSwitch | 1.3.6.1.4.1.25506.10.2.1.10.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource.
| ||||
| Chh3cReplicaRowStatus | 1.3.6.1.4.1.25506.10.2.1.10.1.25 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to enable or disable the replication. | ||||
| Thh3cReplicaStateTable | 1.3.6.1.4.1.25506.10.2.1.11 | NA | ||
table · not-accessible · current This table contains some entity to show replication state. | ||||
| Rhh3cReplicaStateEntry | 1.3.6.1.4.1.25506.10.2.1.11.1 | NA | ||
row · not-accessible · current An entry containing show information applicable to the replication state.
| ||||
| Chh3cReplicaDelta | 1.3.6.1.4.1.25506.10.2.1.11.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the size of delta data after last sync.
| ||||
| Chh3cReplicaLastSyncTime | 1.3.6.1.4.1.25506.10.2.1.11.1.2 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object identifies the date and time when last sync is taken. | ||||
| Chh3cReplicaNextSyncTime | 1.3.6.1.4.1.25506.10.2.1.11.1.3 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object identifies the date and time when next sync will be taken. | ||||
| Chh3cReplicaSyncTotalSize | 1.3.6.1.4.1.25506.10.2.1.11.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies how much data need to be synchronized to the replica resource for current replication.
| ||||
| Chh3cReplicaSyncCurPercentage | 1.3.6.1.4.1.25506.10.2.1.11.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies how much data has been synchronized to the replica resource for current replication. | ||||
| Chh3cReplicaSyncPerformance | 1.3.6.1.4.1.25506.10.2.1.11.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the performance of the synchronize. The unit is MB/s. | ||||
| Chh3cReplicaRunStatus | 1.3.6.1.4.1.25506.10.2.1.11.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the state of the replica.
| ||||
| Thh3cCDRConfigTable | 1.3.6.1.4.1.25506.10.2.1.12 | NA | ||
table · not-accessible · current This table contains some entity to config Continuous Replication Resource. | ||||
| Rhh3cCDRConfigEntry | 1.3.6.1.4.1.25506.10.2.1.12.1 | NA | ||
row · not-accessible · current An entry containing some information applicable to Continuous Replication Resource of the logic volume.
| ||||
| Chh3cCDRLvIndex | 1.3.6.1.4.1.25506.10.2.1.12.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of hh3cRepLocalLvIndex. Note that an entry of hh3cCDRConfigTable can be created only when the associated hh3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cCDRDistributeTable objects should be deleted automatically. | ||||
| Chh3cCDRID | 1.3.6.1.4.1.25506.10.2.1.12.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the Continuous Replication Resource. | ||||
| Chh3cCDRStatus | 1.3.6.1.4.1.25506.10.2.1.12.1.3 | Hh3cStorageOnlineState | RO | |
column · Hh3cStorageOnlineState · read-only · current This object identifies the state of the Continuous Replication Resource. | ||||
| Chh3cCDRTotalSize | 1.3.6.1.4.1.25506.10.2.1.12.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the total size of the Continuous Replication Resource.
| ||||
| Chh3cCDRFreeSize | 1.3.6.1.4.1.25506.10.2.1.12.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the free size of the Continuous Replication Resource.
| ||||
| Chh3cCDRSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.12.1.6 | Hh3cExtendSelectPolicy | RC | |
column · Hh3cExtendSelectPolicy · read-create · current This object describes the policy about allocating the space for Continuous Replication Resource. | ||||
| Chh3cCDRRowStatus | 1.3.6.1.4.1.25506.10.2.1.12.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create or delete the Continuous Replication Resource. | ||||
| Thh3cCDRDistributeTable | 1.3.6.1.4.1.25506.10.2.1.13 | NA | ||
table · not-accessible · current This table contains some entity to config the distribution of Continuous Replication Resource. | ||||
| Rhh3cCDRDistributeEntry | 1.3.6.1.4.1.25506.10.2.1.13.1 | NA | ||
row · not-accessible · current An entry containing some information applicable to the distribution of Continuous Replication Resource. | ||||
| Chh3cCDRDistLvIndex | 1.3.6.1.4.1.25506.10.2.1.13.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. | ||||
| Chh3cCDRRaidUuid | 1.3.6.1.4.1.25506.10.2.1.13.1.2 | Hh3cRaidIDType | NA | |
column · Hh3cRaidIDType · not-accessible · current This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | ||||
| Chh3cCDRRaidSize | 1.3.6.1.4.1.25506.10.2.1.13.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current This object identifies the size on the special raid distributed for the Continuous Replication Resource.
| ||||
| Chh3cCDRExtRowStatus | 1.3.6.1.4.1.25506.10.2.1.13.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create the distribution for the Continuous Replication Resource. | ||||
| Thh3cSafeCacheConfigTable | 1.3.6.1.4.1.25506.10.2.1.14 | NA | ||
table · not-accessible · current This table contains some entity to config SafeCache. | ||||
| Rhh3cSafeCacheConfigEntry | 1.3.6.1.4.1.25506.10.2.1.14.1 | NA | ||
row · not-accessible · current An entry containing some information applicable to SafeCache of the logic volume.
| ||||
| Chh3cSafeCacheLvIndex | 1.3.6.1.4.1.25506.10.2.1.14.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cSafeCacheConfigTable can be created only when the associated hh3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cSafeCacheDistributeTable objects should be deleted automatically. | ||||
| Chh3cSafeCacheID | 1.3.6.1.4.1.25506.10.2.1.14.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies a SafeCache. | ||||
| Chh3cSafeCacheStatus | 1.3.6.1.4.1.25506.10.2.1.14.1.3 | Hh3cStorageOnlineState | RO | |
column · Hh3cStorageOnlineState · read-only · current This object identifies the state of the SafeCache. | ||||
| Chh3cSafeCacheTotalSize | 1.3.6.1.4.1.25506.10.2.1.14.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the total size of the SafeCache. The units is million bytes.
| ||||
| Chh3cSafeCacheFreeSize | 1.3.6.1.4.1.25506.10.2.1.14.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies the free size of the SafeCache. The units is million bytes.
| ||||
| Chh3cSafeCacheSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.14.1.6 | Hh3cExtendSelectPolicy | RC | |
column · Hh3cExtendSelectPolicy · read-create · current This object describes the policy about allocating the space for SafeCache. | ||||
| Chh3cSafeCacheThreshold | 1.3.6.1.4.1.25506.10.2.1.14.1.7 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current This object identifies the maximal percentage of date changed before data flushing. | ||||
| Chh3cSafeCacheFlushTime | 1.3.6.1.4.1.25506.10.2.1.14.1.8 | Integer32 | RC | |
column · Integer32 · read-create · current This object identifies the period during which the date can stay in cache before data flushing. The units is second. | ||||
| Chh3cSafeCacheFlushCommand | 1.3.6.1.4.1.25506.10.2.1.14.1.9 | Integer32 (1..64) | RC | |
column · Integer32 (1..64) · read-create · current This object identifies the number of commands when data flushing. | ||||
| Chh3cSafeCacheSkipDupWrite | 1.3.6.1.4.1.25506.10.2.1.14.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies skip duplicate write commands or not.
| ||||
| Chh3cSafeCacheRunStatus | 1.3.6.1.4.1.25506.10.2.1.14.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the run state of the SafeCache.
| ||||
| Chh3cSafeCacheSwitch | 1.3.6.1.4.1.25506.10.2.1.14.1.12 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache.
| ||||
| Chh3cSafeCacheRowStatus | 1.3.6.1.4.1.25506.10.2.1.14.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create or delete the SafeCache. | ||||
| Thh3cSafeCacheDistributeTable | 1.3.6.1.4.1.25506.10.2.1.15 | NA | ||
table · not-accessible · current This table contains some entity to config the SafeCache resource. | ||||
| Rhh3cSafeCacheDistributeEntry | 1.3.6.1.4.1.25506.10.2.1.15.1 | NA | ||
row · not-accessible · current An entry containing some information applicable to SafeCache resource of the logic volume. | ||||
| Chh3cSafeCacheDistLvIndex | 1.3.6.1.4.1.25506.10.2.1.15.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. | ||||
| Chh3cSafeCacheRaidUuid | 1.3.6.1.4.1.25506.10.2.1.15.1.2 | Hh3cRaidIDType | NA | |
column · Hh3cRaidIDType · not-accessible · current This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | ||||
| Chh3cSafeCacheRaidSize | 1.3.6.1.4.1.25506.10.2.1.15.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current This object identifies the size on the special raid distributed for the SafeCache resource. | ||||
| Chh3cSafeCacheExtRowStatus | 1.3.6.1.4.1.25506.10.2.1.15.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create the distribution for the SafeCache resource. | ||||
| Thh3cMirrorConfigTable | 1.3.6.1.4.1.25506.10.2.1.16 | NA | ||
table · not-accessible · current This table contains some entity to config mirror. | ||||
| Rhh3cMirrorConfigEntry | 1.3.6.1.4.1.25506.10.2.1.16.1 | NA | ||
row · not-accessible · current An entry containing some information applicable to mirror for the logic volume.
| ||||
| Chh3cMirrorLvIndex | 1.3.6.1.4.1.25506.10.2.1.16.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of hh3cLvindex. Note that an entry of hh3cMirrorConfigTable can be created only when the associated hh3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated hh3cMirrorDistributeTable objects should be deleted automatically. | ||||
| Chh3cMirrorType | 1.3.6.1.4.1.25506.10.2.1.16.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This object identifies the type of the mirror.
| ||||
| Chh3cMirrorStatus | 1.3.6.1.4.1.25506.10.2.1.16.1.3 | Hh3cStorageOnlineState | RO | |
column · Hh3cStorageOnlineState · read-only · current This object identifies the state of the mirror resource. | ||||
| Chh3cMirrorName | 1.3.6.1.4.1.25506.10.2.1.16.1.4 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current This object identifies the name of the mirror resource. it is used when promote mirror resource. | ||||
| Chh3cMirrorSyncPercentage | 1.3.6.1.4.1.25506.10.2.1.16.1.5 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This object identifies the percentage of the mirror sync. | ||||
| Chh3cMirrorSyncPerformance | 1.3.6.1.4.1.25506.10.2.1.16.1.6 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current This object identifies the performance of the mirror sync. The unit is MB/S | ||||
| Chh3cMirrorDelta | 1.3.6.1.4.1.25506.10.2.1.16.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current This object identifies size of delta data after the last mirror sync.
| ||||
| Chh3cMirrorRaidType | 1.3.6.1.4.1.25506.10.2.1.16.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies the raid type of the mirror resource.
| ||||
| Chh3cMirrorSelectPolicy | 1.3.6.1.4.1.25506.10.2.1.16.1.9 | Hh3cExtendSelectPolicy | RC | |
column · Hh3cExtendSelectPolicy · read-create · current This object describes the policy about allocating the space for mirror resource. | ||||
| Chh3cMirrorSwitch | 1.3.6.1.4.1.25506.10.2.1.16.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current This object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically.
| ||||
| Chh3cMirrorExtendRaidUuid | 1.3.6.1.4.1.25506.10.2.1.16.1.11 | Hh3cRaidIDType | RC | |
column · Hh3cRaidIDType · read-create · current This object identifies the raid of the mirror resource when the primary logic volume resource is extended. | ||||
| Chh3cMirrorRowStatus | 1.3.6.1.4.1.25506.10.2.1.16.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create or delete the mirror resource. | ||||
| Thh3cMirrorDistributeTable | 1.3.6.1.4.1.25506.10.2.1.17 | NA | ||
table · not-accessible · current This table contains some entity to config the mirror resource. | ||||
| Rhh3cMirrorDistributeEntry | 1.3.6.1.4.1.25506.10.2.1.17.1 | NA | ||
row · not-accessible · current An entry containing some information applicable to mirror resource for the logic volume. | ||||
| Chh3cMirrorDistLvIndex | 1.3.6.1.4.1.25506.10.2.1.17.1.1 | Hh3cLvIDType | NA | |
column · Hh3cLvIDType · not-accessible · current This index is identical to hh3cLvIndex in HH3C-LOGIC-VOLUME-MIB. | ||||
| Chh3cMirrorRaidUuid | 1.3.6.1.4.1.25506.10.2.1.17.1.2 | Hh3cRaidIDType | NA | |
column · Hh3cRaidIDType · not-accessible · current This index is identical to hh3cRaidUuid in HH3C-RAID-MIB. | ||||
| Chh3cMirrorRaidSize | 1.3.6.1.4.1.25506.10.2.1.17.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current This object identifies the size on the special raid distributed for the mirror resource. | ||||
| Chh3cMirrorExtRowStatus | 1.3.6.1.4.1.25506.10.2.1.17.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This object identifies the action to create or delete the distribution for the mirror resource. | ||||