HH3C-SSH-MIB
H3CThis MIB is used to configure SSH server.
snmptranslate -m HH3C-SSH-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-SSH-MIB <host> 1.3.6.1.4.1.25506.2.22Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cSSH | 1.3.6.1.4.1.25506.2.22 | |||
identity This MIB is used to configure SSH server. | ||||
| Nhh3cSSHServerMIB | 1.3.6.1.4.1.25506.2.22.1 | |||
| Nhh3cSSHServerMIBObjects | 1.3.6.1.4.1.25506.2.22.1.1 | |||
| Nhh3cSSHServerGlobalConfig | 1.3.6.1.4.1.25506.2.22.1.1.1 | |||
| Shh3cSSHServerVersion | 1.3.6.1.4.1.25506.2.22.1.1.1.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The protocol version of the SSH server. | ||||
| Shh3cSSHServerCompatibleSSH1x | 1.3.6.1.4.1.25506.2.22.1.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Supporting compatibility with SSH versions 1.x. It is known that there are still devices using the previous versions. During the transition period, it is important to be able to work in a way that is compatible with the installed SSH clients and servers that use the older version of the protocol.
| ||||
| Shh3cSSHServerRekeyInterval | 1.3.6.1.4.1.25506.2.22.1.1.1.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current The time interval of regenerating SSH server key. The unit is hour. | ||||
| Shh3cSSHServerAuthRetries | 1.3.6.1.4.1.25506.2.22.1.1.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The limit times of a specified user can retry. | ||||
| Shh3cSSHServerAuthTimeout | 1.3.6.1.4.1.25506.2.22.1.1.1.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current The SSH server has a timeout for authentication and disconnect if the authentication has not been accepted within the timeout period. The unit is second. | ||||
| Shh3cSFTPServerIdleTimeout | 1.3.6.1.4.1.25506.2.22.1.1.1.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current The SFTP server has a timeout for idle connection if a user has no activities within the timeout period. The unit is minute. | ||||
| Shh3cSSHServerEnable | 1.3.6.1.4.1.25506.2.22.1.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable SSH server function.
| ||||
| Shh3cSFTPServerEnable | 1.3.6.1.4.1.25506.2.22.1.1.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable SFTP server function.
| ||||
| Shh3cSTelnetServerEnable | 1.3.6.1.4.1.25506.2.22.1.1.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable STelnet server function.
| ||||
| Shh3cSCPServerEnable | 1.3.6.1.4.1.25506.2.22.1.1.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable SCP server function.
| ||||
| Nhh3cSSHUserConfig | 1.3.6.1.4.1.25506.2.22.1.1.2 | |||
| Thh3cSSHUserConfigTable | 1.3.6.1.4.1.25506.2.22.1.1.2.1 | NA | ||
table · not-accessible · current A table for managing SSH users. | ||||
| Rhh3cSSHUserConfigEntry | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1 | NA | ||
| Chh3cSSHUserName | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.1 | DisplayString | NA | |
column · DisplayString · not-accessible · current The name of SSH user. | ||||
| Chh3cSSHUserServiceType | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The service type of SSH user uses.
| ||||
| Chh3cSSHUserAuthType | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The authentication type of SSH user chooses.
| ||||
| Chh3cSSHUserPublicKeyName | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.4 | DisplayString | RC | |
column · DisplayString · read-create · current The public key which is used for authentication. A maximum of 6 public keys can be assigned to one user. If multiple public keys are assigned, the user can log in to the SSH server from different devices at the same time by using different public keys. | ||||
| Chh3cSSHUserWorkDirectory | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current The SFTP user's work directory associates with an existing user. | ||||
| Chh3cSSHUserRowStatus | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The row status variable, used in accordance to installation and removal conventions for conceptual rows. When the `hh3cSSHUserRowStatus' is set to active(1), no objects in this table can be modified. When 'hh3cSSHUserRowStatus' is set to notInService(2), every object except the 'hh3cSSHUserName' object in this table can be modified. To create a row in this table, a manager must set this object to createAndGo(4). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the hh3cSSHUserRowStatus column is 'notReady'. | ||||
| Chh3cSSHUserPublicKeyName2 | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.7 | DisplayString | RC | |
column · DisplayString · read-create · current The public key which is used for authentication. A maximum of 6 public keys can be assigned to one user. If multiple public keys are assigned, the user can log in to the SSH server from different devices at the same time by using different public keys. | ||||
| Chh3cSSHUserPublicKeyName3 | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current The public key which is used for authentication. A maximum of 6 public keys can be assigned to one user. If multiple public keys are assigned, the user can log in to the SSH server from different devices at the same time by using different public keys. | ||||
| Chh3cSSHUserPublicKeyName4 | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.9 | DisplayString | RC | |
column · DisplayString · read-create · current The public key which is used for authentication. A maximum of 6 public keys can be assigned to one user. If multiple public keys are assigned, the user can log in to the SSH server from different devices at the same time by using different public keys. | ||||
| Chh3cSSHUserPublicKeyName5 | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.10 | DisplayString | RC | |
column · DisplayString · read-create · current The public key which is used for authentication. A maximum of 6 public keys can be assigned to one user. If multiple public keys are assigned, the user can log in to the SSH server from different devices at the same time by using different public keys. | ||||
| Chh3cSSHUserPublicKeyName6 | 1.3.6.1.4.1.25506.2.22.1.1.2.1.1.11 | DisplayString | RC | |
column · DisplayString · read-create · current The public key which is used for authentication. A maximum of 6 public keys can be assigned to one user. If multiple public keys are assigned, the user can log in to the SSH server from different devices at the same time by using different public keys. | ||||
| Thh3cSSHSessionInfoTable | 1.3.6.1.4.1.25506.2.22.1.1.3 | NA | ||
table · not-accessible · current A table for SSH sessions. | ||||
| Rhh3cSSHSessionInfoEntry | 1.3.6.1.4.1.25506.2.22.1.1.3.1 | NA | ||
| Chh3cSSHSessionID | 1.3.6.1.4.1.25506.2.22.1.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The identifier of SSH session. | ||||
| Chh3cSSHSessionUserName | 1.3.6.1.4.1.25506.2.22.1.1.3.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The user name of SSH session. | ||||
| Chh3cSSHSessionUserIpAddrType | 1.3.6.1.4.1.25506.2.22.1.1.3.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current The user IP address type of SSH session. | ||||
| Chh3cSSHSessionUserIpAddr | 1.3.6.1.4.1.25506.2.22.1.1.3.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current The user IP address of SSH session. | ||||
| Chh3cSSHSessionClientVersion | 1.3.6.1.4.1.25506.2.22.1.1.3.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The client version of SSH session. It is known that there are still devices using the previous versions. | ||||
| Chh3cSSHSessionServiceType | 1.3.6.1.4.1.25506.2.22.1.1.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The service type of SSH session.
| ||||
| Chh3cSSHSessionEncry | 1.3.6.1.4.1.25506.2.22.1.1.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The encryption algorithm of SSH session. There are several encryption algorithms used in SSH protocol, please refer to RFC4253 Section 6.3.
| ||||
| Chh3cSSHSessionState | 1.3.6.1.4.1.25506.2.22.1.1.3.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The status of SSH session. init : This session is in initial status. verExchange : This session is in version exchanging. keysExchange : This session is in keys exchanging. authRequest : This session is in authentication requesting. serviceRequest : This session is in service requesting. established : This session has been established. disconnected : This session has been disconnected.
| ||||
| Nhh3cSSHServerObjForTrap | 1.3.6.1.4.1.25506.2.22.1.2 | |||
| Shh3cSSHAttemptUserName | 1.3.6.1.4.1.25506.2.22.1.2.1 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The user name of the attacker who attempted to log in. | ||||
| Shh3cSSHAttemptIpAddrType | 1.3.6.1.4.1.25506.2.22.1.2.2 | InetAddressType | AN | |
scalar · InetAddressType · accessible-for-notify · current The IP address type of the attacker who attempted to log in. | ||||
| Shh3cSSHAttemptIpAddr | 1.3.6.1.4.1.25506.2.22.1.2.3 | InetAddress | AN | |
scalar · InetAddress · accessible-for-notify · current The IP address of the attacker who attempted to log in. | ||||
| Shh3cSSHUserAuthFailureReason | 1.3.6.1.4.1.25506.2.22.1.2.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The reason for that a user failed to log in.
| ||||
| Shh3cSSHUserAuthFailureTime | 1.3.6.1.4.1.25506.2.22.1.2.5 | DateAndTime | AN | |
scalar · DateAndTime · accessible-for-notify · current The time when authentication failed to log in. For example: 2021-09-14,13:30:16. | ||||
| Shh3cSSHSessionLoginTime | 1.3.6.1.4.1.25506.2.22.1.2.6 | DateAndTime | AN | |
scalar · DateAndTime · accessible-for-notify · current The Login time of SSH session. For example: 2021-09-14,13:30:16. | ||||
| Shh3cSSHSessionLogoffTime | 1.3.6.1.4.1.25506.2.22.1.2.7 | DateAndTime | AN | |
scalar · DateAndTime · accessible-for-notify · current The Logoff time of SSH session. For example: 2021-09-14,13:30:16. | ||||
| Shh3cSSHSessionUserRoleName | 1.3.6.1.4.1.25506.2.22.1.2.8 | DisplayString (SIZE (1..63)) | AN | |
scalar · DisplayString (SIZE (1..63)) · accessible-for-notify · current The user role of SSH session. such as network-admin network-operation etc. | ||||
| Shh3cSSHLoginFailedTimes | 1.3.6.1.4.1.25506.2.22.1.2.9 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The number of user login failures. | ||||
| Shh3cSSHStatisticPeriod | 1.3.6.1.4.1.25506.2.22.1.2.10 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current User login failure statistics period.
| ||||
| Nhh3cSSHServerNotifications | 1.3.6.1.4.1.25506.2.22.1.3 | |||
| Nhh3cSSHServerNotificationsPrefix | 1.3.6.1.4.1.25506.2.22.1.3.0 | |||
| !hh3cSSHUserAuthFailure | 1.3.6.1.4.1.25506.2.22.1.3.0.1 | |||
notification · current The trap is generated when a user fails to authentication. | ||||
| !hh3cSSHVersionNegotiationFailure | 1.3.6.1.4.1.25506.2.22.1.3.0.2 | |||
notification · current The trap is generated when a user fails to negotiate SSH protocol version. | ||||
| !hh3cSSHUserLogin | 1.3.6.1.4.1.25506.2.22.1.3.0.3 | |||
notification · current The trap is generated when a user logs in successfully. | ||||
| !hh3cSSHUserLogoff | 1.3.6.1.4.1.25506.2.22.1.3.0.4 | |||
notification · current The trap is generated when a user logs off. | ||||
| !hh3cSSHLoginFailed | 1.3.6.1.4.1.25506.2.22.1.3.0.5 | |||
notification · current Users failed to login ssh server too frequently. | ||||
| !hh3cSSHLoginFailedClear | 1.3.6.1.4.1.25506.2.22.1.3.0.6 | |||
notification · current The ssh user login-failed alarm was cleared. | ||||
Traps / Notifications
- hh3cSSHLoginFailed
1.3.6.1.4.1.25506.2.22.1.3.0.5 - hh3cSSHLoginFailedClear
1.3.6.1.4.1.25506.2.22.1.3.0.6 - hh3cSSHUserAuthFailure
1.3.6.1.4.1.25506.2.22.1.3.0.1 - hh3cSSHUserLogin
1.3.6.1.4.1.25506.2.22.1.3.0.3 - hh3cSSHUserLogoff
1.3.6.1.4.1.25506.2.22.1.3.0.4 - hh3cSSHVersionNegotiationFailure
1.3.6.1.4.1.25506.2.22.1.3.0.2