HH3C-RCR-MIB
H3CThis MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow.
snmptranslate -m HH3C-RCR-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-RCR-MIB <host> 1.3.6.1.4.1.25506.2.48Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cRcr | 1.3.6.1.4.1.25506.2.48 | |||
identity This MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow. | ||||
| Nhh3cRcrMR | 1.3.6.1.4.1.25506.2.48.1 | |||
| Nhh3cRcrMRGroup | 1.3.6.1.4.1.25506.2.48.1.1 | |||
| Shh3cRcrMRAllMaxUsedBandRate | 1.3.6.1.4.1.25506.2.48.1.1.1 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current The max used band rate of all external interfaces on member router-devices(MRs) which are controlled by RCR.
| ||||
| Shh3cRcrMRAllMinUsedBandRate | 1.3.6.1.4.1.25506.2.48.1.1.2 | Integer32 (0..100) | RW | |
scalar · Integer32 (0..100) · read-write · current The min used band rate of all external interfaces on MRs which are controlled by RCR.
| ||||
| Shh3cRcrMRListenTime | 1.3.6.1.4.1.25506.2.48.1.1.3 | Integer32 (1..1440) | RW | |
scalar · Integer32 (1..1440) · read-write · current The persistent time of a probe on member router-device(MR) which is controlled by RCR.
| ||||
| Thh3cRcrMRStateTable | 1.3.6.1.4.1.25506.2.48.1.2 | NA | ||
table · not-accessible · current This table contains state information of each MR which is controlled by RCR. | ||||
| Rhh3cRcrMRStateEntry | 1.3.6.1.4.1.25506.2.48.1.2.1 | NA | ||
| Chh3cRcrMRName | 1.3.6.1.4.1.25506.2.48.1.2.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current The name of MR which is controlled by RCR. | ||||
| Chh3cRcrMRState | 1.3.6.1.4.1.25506.2.48.1.2.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The state of MR where identified on the controller
router-device(CR).
down: The MR has been enabled but has not connected
to the CR with TCP connection.
up: The MR has already successfully connected to
the CR but has not been ready for adjusting
route.
controlled: The MR has already passed the
consultation with the CR and could
be controlled by it.
| ||||
| Chh3cRcrMRAuthType | 1.3.6.1.4.1.25506.2.48.1.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The authentication type of communication packet between CR and MR.
| ||||
| Chh3cRcrMRAuthPwd | 1.3.6.1.4.1.25506.2.48.1.2.1.4 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current The authentication password of communication packet between CR and MR. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object. | ||||
| Thh3cRcrMROutIfStateTable | 1.3.6.1.4.1.25506.2.48.1.3 | NA | ||
table · not-accessible · current This table contains the external interface states of each MR which is controlled by RCR. | ||||
| Rhh3cRcrMROutIfStateEntry | 1.3.6.1.4.1.25506.2.48.1.3.1 | NA | ||
| Chh3cRcrMROutIfName | 1.3.6.1.4.1.25506.2.48.1.3.1.1 | OCTET STRING (SIZE (1..48)) | NA | |
column · OCTET STRING (SIZE (1..48)) · not-accessible · current The name of external interface on each MR. | ||||
| Chh3cRcrMROutIfState | 1.3.6.1.4.1.25506.2.48.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The state of external interface on each MR.
| ||||
| Chh3cRcrMROutIfMaxUsedBandRate | 1.3.6.1.4.1.25506.2.48.1.3.1.3 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current The max spendable bandwidth rate on external interface.
| ||||
| Chh3cRcrMROutIfMinUsedBandRate | 1.3.6.1.4.1.25506.2.48.1.3.1.4 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current The min spendable bandwidth rate on external interface.
| ||||
| Chh3cRcrMROutIfUsedBandRate | 1.3.6.1.4.1.25506.2.48.1.3.1.5 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current The used bandwidth rate on external interface.
| ||||
| Nhh3cRcrCR | 1.3.6.1.4.1.25506.2.48.2 | |||
| Nhh3cRcrCRGroup | 1.3.6.1.4.1.25506.2.48.2.1 | |||
| Shh3cRcrCRState | 1.3.6.1.4.1.25506.2.48.2.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The state of the CR which is controlled
by RCR.
down: The CR has been enabled but has not
started a TCP connection server.
init: The CR has started a TCP connection
server and has been waiting for MR
connection, but has not been ready for adjusting route.
active: The CR is ready for adjusting route.
| ||||
| Shh3cRcrCRPortNum | 1.3.6.1.4.1.25506.2.48.2.1.2 | Integer32 | RW | |
scalar · Integer32 · read-write · current The communication port number between CR and MR. | ||||
| Shh3cRcrCRCtrlMode | 1.3.6.1.4.1.25506.2.48.2.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The observe mode or control mode is configured to operate in the CR.
observe: The CR monitors prefixes and external interfaces based on default
and user-defined policies and then reports the status of
the network and the decisions that should be made but does
not implement any changes.
controlled: The CR monitors prefixes and external interfaces based on default
and user-defined policies and then reports the status
of the network and the decisions that should be made
and implement any changes.
| ||||
| Shh3cRcrCRChooseMode | 1.3.6.1.4.1.25506.2.48.2.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The algorithm used to choose an alternative external interface for a prefix.
good: The first external interface that conforms to the policy is selected as
the new external interface.
best: Information is collected from all external interfaces and the best one
is selected even though the best external interface may not be in-policy.
| ||||
| Shh3cRcrCRKeepaliveTime | 1.3.6.1.4.1.25506.2.48.2.1.5 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current The interval time of the transmission of the keepalive communication packet between CR and MR.
| ||||
| Shh3cRcrCRPolicyMode | 1.3.6.1.4.1.25506.2.48.2.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The chosen policy mode which decides to change what prefix.
prefix: An RCR policy is designed to select IP prefixes or to
select RCR learn policies using a match clause and then to
apply RCR policy configurations using a set clause.
operation: To deside to adjusted prefixes based on operation
which user configured.
study: To learn and optimize prefixes based on the highest
throughput or the highest delay.
| ||||
| Shh3cRcrCRStudyMode | 1.3.6.1.4.1.25506.2.48.2.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mode of collecting prefix in studying configuration mode. It's to collect either the prefix of max thoughtout or the prefix of max delay time. It doesn't have a value when CR isn't in studying configuration mode.
| ||||
| Shh3cRcrCRStudyIpPrefixNum | 1.3.6.1.4.1.25506.2.48.2.1.8 | Integer32 (1..2500) | RW | |
scalar · Integer32 (1..2500) · read-write · current The max number of collecting prefix in studying configuration mode. | ||||
| Shh3cRcrCRIpPrefixLen | 1.3.6.1.4.1.25506.2.48.2.1.9 | Integer32 (1..32) | RW | |
scalar · Integer32 (1..32) · read-write · current The mask length of collecting prefix in configuration mode. | ||||
| Thh3cRcrCRRcrPolicyTable | 1.3.6.1.4.1.25506.2.48.2.2 | NA | ||
table · not-accessible · current This table contains objects to get statistic information of interfaces on a device. | ||||
| Rhh3cRcrCRRcrPolicyEntry | 1.3.6.1.4.1.25506.2.48.2.2.1 | NA | ||
| Chh3cRcrCRRcrPlyID | 1.3.6.1.4.1.25506.2.48.2.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ID of RCR policy which the user has configured. | ||||
| Chh3cRcrCRRcrPlyMatchIPListName | 1.3.6.1.4.1.25506.2.48.2.2.1.2 | OCTET STRING (SIZE (1..19)) | RW | |
column · OCTET STRING (SIZE (1..19)) · read-write · current The matched IP prefix list name of RCR policy which the user has configured. | ||||
| Chh3cRcrCRRcrPlyMatchStudyEnable | 1.3.6.1.4.1.25506.2.48.2.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Whether the RCR policy which the user has configured is matched for studying prefix mode.
| ||||
| Chh3cRcrCRRcrPlyMatchOperPlyName | 1.3.6.1.4.1.25506.2.48.2.2.1.4 | OCTET STRING (SIZE (1..19)) | RW | |
column · OCTET STRING (SIZE (1..19)) · read-write · current The matched operation policy name of RCR policy which the user has configured. | ||||
| Chh3cRcrCRRcrAclNumber | 1.3.6.1.4.1.25506.2.48.2.2.1.5 | Integer32 (3000..3999) | RW | |
column · Integer32 (3000..3999) · read-write · current The matched acl number of RCR operation policy which the user has configured. | ||||
| Chh3cRcrCRRcrPlyDelayTime | 1.3.6.1.4.1.25506.2.48.2.2.1.6 | Integer32 (1..10000) | RW | |
column · Integer32 (1..10000) · read-write · current The absolute maximum delay time. The range of values that can be configured is from 1 to 10000.
| ||||
| Chh3cRcrCRRcrPlyLossRate | 1.3.6.1.4.1.25506.2.48.2.2.1.7 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current The packet loss percent of prefix which the CR concerns.
| ||||
| Thh3cRcrCRMatPrefixPerfTable | 1.3.6.1.4.1.25506.2.48.2.3 | NA | ||
table · not-accessible · current This table contains the matched prefix performance information. | ||||
| Rhh3cRcrCRMatPrefixPerfEntry | 1.3.6.1.4.1.25506.2.48.2.3.1 | NA | ||
row · not-accessible · current Entry items | ||||
| Chh3cRcrCRMatPrefPerfAddrType | 1.3.6.1.4.1.25506.2.48.2.3.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The destination IP addresses type of matched prefix which the CR wants (IPv4 or IPv6). | ||||
| Chh3cRcrCRMatPrefPerfDestIPAddr | 1.3.6.1.4.1.25506.2.48.2.3.1.2 | InetAddress | NA | |
column · InetAddress · not-accessible · current The destination IP address of matched prefix which the CR wants. | ||||
| Chh3cRcrCRMatPrefPerfDestMaskLen | 1.3.6.1.4.1.25506.2.48.2.3.1.3 | Integer32 (0..32) | NA | |
column · Integer32 (0..32) · not-accessible · current The destination IP address mask length of matched prefix which the CR wants. | ||||
| Chh3cRcrCRMatPrefPerfDelayTime | 1.3.6.1.4.1.25506.2.48.2.3.1.4 | Integer32 (1..10000) | RO | |
column · Integer32 (1..10000) · read-only · current The absolute maximum delay time of prefix which the CR has configured.
| ||||
| Chh3cRcrCRMatPrefPerfLossRate | 1.3.6.1.4.1.25506.2.48.2.3.1.5 | Integer32 (1..100) | RO | |
column · Integer32 (1..100) · read-only · current The packet loss percent of prefix which the CR has configured.
| ||||
| Chh3cRcrCRMatPrefPerfThroughput | 1.3.6.1.4.1.25506.2.48.2.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The bandwidth of prefix which the CR has monitored.
| ||||
| Thh3cRcrCRAdjustPrefixTable | 1.3.6.1.4.1.25506.2.48.2.4 | NA | ||
table · not-accessible · current This table contains objects to get adjusted prefix information which the CR controlled. | ||||
| Rhh3cRcrCRAdjustPrefixEntry | 1.3.6.1.4.1.25506.2.48.2.4.1 | NA | ||
row · not-accessible · current Entry items | ||||
| Chh3cRcrCRAdjuPrefDestAddrType | 1.3.6.1.4.1.25506.2.48.2.4.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The IP address type of the adjusted prefix which CR controlled (IPv4 or IPv6). | ||||
| Chh3cRcrCRAdjuPrefDestAddr | 1.3.6.1.4.1.25506.2.48.2.4.1.2 | InetAddress | NA | |
column · InetAddress · not-accessible · current The IP address of the adjusted prefix which CR controlled. | ||||
| Chh3cRcrCRAdjuPrefMaskLen | 1.3.6.1.4.1.25506.2.48.2.4.1.3 | Integer32 (0..32) | NA | |
column · Integer32 (0..32) · not-accessible · current The IP address mask length of the adjusted prefix which CR controlled. | ||||
| Chh3cRcrCRAdjuPrefPreMRName | 1.3.6.1.4.1.25506.2.48.2.4.1.4 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current The name of the MR which the previous outbound traffic flows through. | ||||
| Chh3cRcrCRAdjuPrefPreOutIfName | 1.3.6.1.4.1.25506.2.48.2.4.1.5 | OCTET STRING (SIZE (1..48)) | NA | |
column · OCTET STRING (SIZE (1..48)) · not-accessible · current The name of the external interface on the MR which the previous outbound traffic flows through. | ||||
| Chh3cRcrCRAdjuPrefCurMRName | 1.3.6.1.4.1.25506.2.48.2.4.1.6 | OCTET STRING (SIZE (1..32)) | RO | |
column · OCTET STRING (SIZE (1..32)) · read-only · current The name of the MR which the current outbound traffic flows through. | ||||
| Chh3cRcrCRAdjuPrefCurOutIfName | 1.3.6.1.4.1.25506.2.48.2.4.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The name of the external interface on the MR which the current outbound traffic flows through. | ||||
| Chh3cRcrCRAdjuPrefPersistTime | 1.3.6.1.4.1.25506.2.48.2.4.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The persisting time from the time which the adjusted outbound traffic has been adjusted by CR to now.
| ||||
| Chh3cRcrCRAdjuPrefAgeTime | 1.3.6.1.4.1.25506.2.48.2.4.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The time which the adjusted prefix remains.
| ||||