HH3C-PPP-OVER-SONET-MIB
H3CThis MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions.
snmptranslate -m HH3C-PPP-OVER-SONET-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-PPP-OVER-SONET-MIB <host> 1.3.6.1.4.1.25506.2.19Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | ifDescr, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cPos | 1.3.6.1.4.1.25506.2.19 | |||
identity This MIB manages POS(PPP Over Sonet)interfaces by providing an operational table which controls parameters of each POS interface and reports alarm conditions. | ||||
| Nhh3cPosMIBObjects | 1.3.6.1.4.1.25506.2.19.1 | |||
| Thh3cPosParamTable | 1.3.6.1.4.1.25506.2.19.1.1 | NA | ||
table · not-accessible · current The pos parameter table. | ||||
| Rhh3cPosParamTableEntry | 1.3.6.1.4.1.25506.2.19.1.1.1 | NA | ||
| Chh3cPosCRC | 1.3.6.1.4.1.25506.2.19.1.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The length of CRC
| ||||
| Chh3cPosMTU | 1.3.6.1.4.1.25506.2.19.1.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Maximum Transfer Unit (MTU) of POS interface | ||||
| Chh3cPosScramble | 1.3.6.1.4.1.25506.2.19.1.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Scrambling is used to avoid continuous 0 or 1 in signals. This object is to decide whether to scramble or not | ||||
| Chh3cPosClockSource | 1.3.6.1.4.1.25506.2.19.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The value indicates the source of clock signal. System indicates that clock signals are from device itself and line for clock signals from remote
| ||||
| Chh3cPosSdhFlagJ0 | 1.3.6.1.4.1.25506.2.19.1.1.1.5 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current The section trace byte. This node is used when the frame type is sdh. | ||||
| Chh3cPosSdhFlagJ1 | 1.3.6.1.4.1.25506.2.19.1.1.1.6 | DisplayString (SIZE (0..15)) | RW | |
column · DisplayString (SIZE (0..15)) · read-write · current The path trace byte. This node is used when the frame type is sdh. | ||||
| Chh3cPosSonetFlagJ0 | 1.3.6.1.4.1.25506.2.19.1.1.1.7 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The section trace byte. This node is used when the frame type is sonet. | ||||
| Chh3cPosSonetFlagJ1 | 1.3.6.1.4.1.25506.2.19.1.1.1.8 | DisplayString (SIZE (0..62)) | RW | |
column · DisplayString (SIZE (0..62)) · read-write · current The path trace byte. This node is used when the frame type is sonet. | ||||
| Chh3cPosFlagC2 | 1.3.6.1.4.1.25506.2.19.1.1.1.9 | Integer32 (0..255) | RW | |
column · Integer32 (0..255) · read-write · current The parameter for the channel signal value of C2 byte | ||||
| Chh3cPosFrameType | 1.3.6.1.4.1.25506.2.19.1.1.1.10 | INTEGER | RW | |
column · INTEGER · read-write · current The frame type that encapsulates the packet. Default frame type is sdh(Synchronous Digital Hierarchy) It also can be configured using sonet type(Synchronous Optical Network).
| ||||
| Chh3cPosBindVlanId | 1.3.6.1.4.1.25506.2.19.1.1.1.11 | Integer32 (0..4095) | RW | |
column · Integer32 (0..4095) · read-write · current The vlan that this pos port binds. The vlan can not include any other port, otherwise error will be returned. If the vlan has a virtual interface, the status of virtual interface will be up or down according to the link status or this pos. | ||||
| Chh3cPosEncapsulation | 1.3.6.1.4.1.25506.2.19.1.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current The type of encapsulation
| ||||
| Chh3cPoskeepaliveTimeout | 1.3.6.1.4.1.25506.2.19.1.1.1.13 | Integer32 (0..32767) | RW | |
column · Integer32 (0..32767) · read-write · current The keeplive of ppp, hdlc, fr or mfr. It is the query interval of link status. Two members of a link should have same keeplive. The default 0 prohibits detecting status of link. | ||||
| Chh3cPosBERthresholdSF | 1.3.6.1.4.1.25506.2.19.1.1.1.14 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current The bit-error rate threshold for Signal Fault. SF threshold should be greater than SD threshold. | ||||
| Chh3cPosBERthresholdSD | 1.3.6.1.4.1.25506.2.19.1.1.1.15 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current The bit-error rate threshold for Signal Degrade. SD threshold should be less than SF threshold. | ||||
| Chh3cPosB1Error | 1.3.6.1.4.1.25506.2.19.1.1.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for SBIPE(Section Bit Interleave Parity Error) | ||||
| Chh3cPosB2Error | 1.3.6.1.4.1.25506.2.19.1.1.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for LBIPE(Line Bit Interleave Parity Error) | ||||
| Chh3cPosB3Error | 1.3.6.1.4.1.25506.2.19.1.1.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current Counter for PBIPE(Path Bit Interleave Parity Error) | ||||
| Chh3cPosM1Error | 1.3.6.1.4.1.25506.2.19.1.1.1.19 | Counter64 | RO | |
column · Counter64 · read-only · current How many times does LREI(Line Remote Error Indication) occur | ||||
| Chh3cPosG1Error | 1.3.6.1.4.1.25506.2.19.1.1.1.20 | Counter64 | RO | |
column · Counter64 · read-only · current How many times does PREI(Path Remote Error Indication) occur | ||||
| Chh3cPosFlagJ0Type | 1.3.6.1.4.1.25506.2.19.1.1.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current The frame type that encapsulates the flag J0. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
| ||||
| Chh3cPosFlagJ1Type | 1.3.6.1.4.1.25506.2.19.1.1.1.22 | INTEGER | RW | |
column · INTEGER · read-write · current The frame type that encapsulates the flag J1. Default frame type is sdh(Synchronous Digital Hierarchy). It also can be configured using sonet(Synchronous Optical Network) type.
| ||||
| Chh3cPosB1TCAThreshold | 1.3.6.1.4.1.25506.2.19.1.1.1.23 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current Threshold for B1 TCA. | ||||
| Chh3cPosB2TCAThreshold | 1.3.6.1.4.1.25506.2.19.1.1.1.24 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current Threshold for B2 TCA. | ||||
| Chh3cPosB3TCAThreshold | 1.3.6.1.4.1.25506.2.19.1.1.1.25 | Integer32 (3..9) | RW | |
column · Integer32 (3..9) · read-write · current Threshold for B3 TCA. | ||||
| Chh3cPosB1TCAEnable | 1.3.6.1.4.1.25506.2.19.1.1.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current Enable traps of B1 TCA.
| ||||
| Chh3cPosB2TCAEnable | 1.3.6.1.4.1.25506.2.19.1.1.1.27 | INTEGER | RW | |
column · INTEGER · read-write · current Enable traps of B2 TCA.
| ||||
| Chh3cPosB3TCAEnable | 1.3.6.1.4.1.25506.2.19.1.1.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current Enable traps of B3 TCA.
| ||||
| Nhh3cPosMIBNotificationsPrefix | 1.3.6.1.4.1.25506.2.19.2 | |||
| Nhh3cPosMIBNotifications | 1.3.6.1.4.1.25506.2.19.2.0 | |||
| !hh3cPosLOSAlarm | 1.3.6.1.4.1.25506.2.19.2.0.1 | |||
| !hh3cPosLOFAlarm | 1.3.6.1.4.1.25506.2.19.2.0.2 | |||
| !hh3cPosOOFAlarm | 1.3.6.1.4.1.25506.2.19.2.0.3 | |||
| !hh3cPosLAISAlarm | 1.3.6.1.4.1.25506.2.19.2.0.4 | |||
| !hh3cPosLRDIAlarm | 1.3.6.1.4.1.25506.2.19.2.0.5 | |||
| !hh3cPosPRDIAlarm | 1.3.6.1.4.1.25506.2.19.2.0.6 | |||
| !hh3cPosPAISAlarm | 1.3.6.1.4.1.25506.2.19.2.0.7 | |||
| !hh3cPosLOPAlarm | 1.3.6.1.4.1.25506.2.19.2.0.8 | |||
| !hh3cPosSTIMAlarm | 1.3.6.1.4.1.25506.2.19.2.0.9 | |||
notification · current Alarm indicates inconsistency between sent and received J0 bytes.
| ||||
| !hh3cPosPTIMAlarm | 1.3.6.1.4.1.25506.2.19.2.0.10 | |||
notification · current Alarm indicates inconsistency between sent and received J1 bytes.
| ||||
| !hh3cPosPSLMAlarm | 1.3.6.1.4.1.25506.2.19.2.0.11 | |||
| !hh3cPosLSDAlarm | 1.3.6.1.4.1.25506.2.19.2.0.12 | |||
notification · current Alarm indicates that the B2 bit-error rate exceeds SD threshold.
| ||||
| !hh3cPosLSFAlarm | 1.3.6.1.4.1.25506.2.19.2.0.13 | |||
notification · current Alarm indicates that the B2 bit-error rate exceeds SF threshold.
| ||||
| !hh3cPosNormalAlarm | 1.3.6.1.4.1.25506.2.19.2.0.14 | |||
| !hh3cPosB1TCAlarm | 1.3.6.1.4.1.25506.2.19.2.0.15 | |||
| !hh3cPosB2TCAlarm | 1.3.6.1.4.1.25506.2.19.2.0.16 | |||
| !hh3cPosB3TCAlarm | 1.3.6.1.4.1.25506.2.19.2.0.17 | |||
Traps / Notifications
- hh3cPosB1TCAlarm
1.3.6.1.4.1.25506.2.19.2.0.15 - hh3cPosB2TCAlarm
1.3.6.1.4.1.25506.2.19.2.0.16 - hh3cPosB3TCAlarm
1.3.6.1.4.1.25506.2.19.2.0.17 - hh3cPosLAISAlarm
1.3.6.1.4.1.25506.2.19.2.0.4 - hh3cPosLOFAlarm
1.3.6.1.4.1.25506.2.19.2.0.2 - hh3cPosLOPAlarm
1.3.6.1.4.1.25506.2.19.2.0.8 - hh3cPosLOSAlarm
1.3.6.1.4.1.25506.2.19.2.0.1 - hh3cPosLRDIAlarm
1.3.6.1.4.1.25506.2.19.2.0.5 - hh3cPosLSDAlarm
1.3.6.1.4.1.25506.2.19.2.0.12 - hh3cPosLSFAlarm
1.3.6.1.4.1.25506.2.19.2.0.13 - hh3cPosNormalAlarm
1.3.6.1.4.1.25506.2.19.2.0.14 - hh3cPosOOFAlarm
1.3.6.1.4.1.25506.2.19.2.0.3 - hh3cPosPAISAlarm
1.3.6.1.4.1.25506.2.19.2.0.7 - hh3cPosPRDIAlarm
1.3.6.1.4.1.25506.2.19.2.0.6 - hh3cPosPSLMAlarm
1.3.6.1.4.1.25506.2.19.2.0.11 - hh3cPosPTIMAlarm
1.3.6.1.4.1.25506.2.19.2.0.10 - hh3cPosSTIMAlarm
1.3.6.1.4.1.25506.2.19.2.0.9