HH3C-PORT-SECURITY-MIB
H3CThe MIB module is used for managing port security.
snmptranslate -m HH3C-PORT-SECURITY-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-PORT-SECURITY-MIB <host> 1.3.6.1.4.1.25506.2.26.1Imports
| HH3C-OID-MIB | hh3cPortSecurity |
|---|---|
| IEEE8021-PAE-MIB | dot1xAuthSessionAuthenticMethod, dot1xAuthSessionTerminateCause, dot1xAuthSessionUserName, dot1xPaePortNumber |
| IF-MIB | ifAdminStatus, ifIndex |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cPortSecurityMIB | 1.3.6.1.4.1.25506.2.26.1 | |||
identity The MIB module is used for managing port security. | ||||
| Nhh3cPortSecurityLeaf | 1.3.6.1.4.1.25506.2.26.1.1 | |||
| Shh3cSecurePortSecurityControl | 1.3.6.1.4.1.25506.2.26.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute controls the system wide operation of network access control. The configured port security options only become operational when this attribute is set to enabled.
| ||||
| Shh3cSecurePortVlanMembershipList | 1.3.6.1.4.1.25506.2.26.1.1.2 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current This is a dummy MIB object referenced by the hh3csecureLogon and hh3csecureLogoff traps. This object contains a comma separated list of the VLAN identifiers (0-4095) assigned to a port. A tagged VLAN has a 'T' suffix after the VLAN number and an untagged VLAN may have an optional 'U' suffix. | ||||
| Nhh3cSecureRalmObjects | 1.3.6.1.4.1.25506.2.26.1.1.4 | |||
| Shh3cSecureRalmDefaultSessionTime | 1.3.6.1.4.1.25506.2.26.1.1.4.1 | Integer32 (1..1000000) | RW | |
scalar · Integer32 (1..1000000) · read-write · current Specifies the default session lifetime in seconds before a forwarding MAC address is re-authenticated. The default time is 1800 seconds. | ||||
| Shh3cSecureRalmHoldoffTime | 1.3.6.1.4.1.25506.2.26.1.1.4.2 | Integer32 (1..1000000) | RW | |
scalar · Integer32 (1..1000000) · read-write · current Specifies the time in seconds before a blocked (denied) MAC address can be re-authenticated. The default time is 60 seconds. | ||||
| Shh3cSecureRalmReauthenticate | 1.3.6.1.4.1.25506.2.26.1.1.4.3 | MacAddress | RW | |
scalar · MacAddress · read-write · current Writing a MAC address to this object causes an immediate RALM re-authentication of this address (can be on any port). If the MAC address not currently known to RALM, it silently ignores the write. | ||||
| Shh3cSecureRalmAuthMode | 1.3.6.1.4.1.25506.2.26.1.1.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current This controls how MAC addresses are authenticated.
papUsernameAsMacAddress(1)
Authentication uses the RADIUS server by
sending a PAP request with Username and
Password both equal to the MAC address being
authenticated. This is the default.
papUsernameFixed(2)
Authentication uses the RADIUS server by
sending a PAP request with Username and
Password coming from the hh3cSecureRalmAuthUsername and
hh3cSecureRalmAuthPassword MIB objects. In this mode
the RADIUS server would normally take into account
the request's calling-station-id attribute, which is
the MAC address of the host being authenticated.
| ||||
| Shh3cSecureRalmAuthUsername | 1.3.6.1.4.1.25506.2.26.1.1.4.5 | DisplayString (SIZE (1..80)) | RW | |
scalar · DisplayString (SIZE (1..80)) · read-write · current This is the username used for authentication requests where hh3cSecureRalmAuthMode is papUsernameFixed. Default shall be 'mac'. | ||||
| Shh3cSecureRalmAuthPassword | 1.3.6.1.4.1.25506.2.26.1.1.4.6 | DisplayString (SIZE (0..63)) | RW | |
scalar · DisplayString (SIZE (0..63)) · read-write · current This is the password used for authentication requests where hh3cSecureRalmAuthMode is papUsernameFixed. Default shall be a null string. | ||||
| Shh3cSecureRalmAuthDomain | 1.3.6.1.4.1.25506.2.26.1.1.4.7 | DisplayString (SIZE (1..255)) | RW | |
scalar · DisplayString (SIZE (1..255)) · read-write · current MAC-authentication users may be configured in a specific domain, which excludes 802.1x and other authentication users. This specifies the domain of all MAC-authentication users. | ||||
| Shh3cSecureRalmAuthOfflineTime | 1.3.6.1.4.1.25506.2.26.1.1.4.8 | Integer32 (60..2147483647) | RW | |
scalar · Integer32 (60..2147483647) · read-write · current Switch isn't informed when online user is offline, so switch should be able to detect offline and inform radius server to stop accounting when there is no traffic of the user. This attribute configures the timer interval of offline-detect. The default time is 300 seconds. | ||||
| Shh3cSecureRalmAuthServerTimeoutTime | 1.3.6.1.4.1.25506.2.26.1.1.4.9 | Integer32 (1..65535) | RW | |
scalar · Integer32 (1..65535) · read-write · current When switch sends request packets (include connecting request and offline request, etc) to radius server and there is no response, switch will terminate the authentication process. This attribute configures the timer interval of server-timeout. The default time is 100 seconds. | ||||
| Shh3cSecureMacControl | 1.3.6.1.4.1.25506.2.26.1.1.4.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current This attribute controls the system wide operation of mac-authentication. The system-wide mac-authentication options become non-operational when this attribute is set to disabled. This is required for hh3cSecurePortSecurityControl to be enabled.
| ||||
| Shh3cSecureUserIPv4BeforeChange | 1.3.6.1.4.1.25506.2.26.1.1.5 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current The user IPv4 address before change. | ||||
| Shh3cSecureUserIPv4AfterChange | 1.3.6.1.4.1.25506.2.26.1.1.6 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current The user IPv4 address after change. | ||||
| Shh3cSecureUserIPv6BeforeChange | 1.3.6.1.4.1.25506.2.26.1.1.7 | Ipv6Address | AN | |
scalar · Ipv6Address · accessible-for-notify · current The user IPv6 address before change. | ||||
| Shh3cSecureUserIPv6AfterChange | 1.3.6.1.4.1.25506.2.26.1.1.8 | Ipv6Address | AN | |
scalar · Ipv6Address · accessible-for-notify · current The user IPv6 address after change. | ||||
| Nhh3cPortSecurityTables | 1.3.6.1.4.1.25506.2.26.1.2 | |||
| Thh3cSecurePortTable | 1.3.6.1.4.1.25506.2.26.1.2.1 | NA | ||
table · not-accessible · current This table defines the security status of each secure port. Each port can have a number of authorised MAC addresses, and these are stored in the hh3cSecureAddressTable. | ||||
| Rhh3cSecurePortEntry | 1.3.6.1.4.1.25506.2.26.1.2.1.1 | NA | ||
row · not-accessible · current There is a row in this table for each secure port, and allows repeater ports to be configured for security on a per port basis. It is indexed using the object ifIndex in RFC1213-MIB.
| ||||
| Chh3cSecurePortMode | 1.3.6.1.4.1.25506.2.26.1.2.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Determines the learning and security modes of the port.
See hh3cSecureNeedToKnowMode and hh3cSecureIntrusionAction to
configure Need To Know and Intrusion Action on each port.
(When in a learning mode, hh3cSecureNumberAddresses determines the maximum
number of addresses that can be learned on the port. This is set
by the user.)
noRestrictions(1) All of the security features are disabled.
continuousLearning(2) Addresses are learned continually. If more
addresses are learned than are permitted on the
port, then one of the older entries will be aged
out. Need To Know and Intrusion Action depends on
hh3cSecureNeedToKnowMode and hh3cSecureIntrusionAction
respectively.
autoLearn(3) All addresses for this port are deleted, and then
addresses are learned up to the number permitted.
hh3cSecurePortMode is then set to secure. Need To
Know and Intrusion Action depends on
hh3cSecureNeedToKnowMode and hh3cSecureIntrusionAction
respectively.
secure(4) Learning is disabled. Need To Know and Intrusion
Action depends on hh3cSecureNeedToKnowMode and
hh3cSecureIntrusionAction respectively.
userLogin(5) Access to the port is denied until the port client is
authorised (by 802.1X or other authentication mechanism).
Once authorised, traffic will be accepted from any MAC
address. The Need To Know and Intrusion Action are ignored.
userLoginSecure(6) Access to the port is denied until the port client
is authorised (by 802.1X or other authentication mechanism).
When the client is authorised, the MAC address is added to the
Secure Address Table.
The hh3cSecureMaximumAddresses is set to one automatically when
this mode is entered. Any existing MAC addresses in the Secure
Address Table are deleted. Need To Know and Intrusion Action
depends on hh3cSecureNeedToKnowMode and hh3cSecureIntrusionAction
respectively. Learning is disabled.
userLoginWithOUI(7) This mode is similar to the userLoginSecure mode
except that a second MAC address may be placed in the Secure
Address Table. This second address is authorised based on the
MAC address OUI value.
If a new device with an authorised OUI value is discovered,
the previous entry is deleted. Traffic from the
OUI authorised device will be accepted even if the user has
not been authenticated. Need To Know and Intrusion Action
depends on hh3cSecureNeedToKnowMode and hh3cSecureIntrusionAction
respectively.
macAddressWithRadius(8) This selects the RADIUS Authenticated Login using
MAC-address (RALM) security mode on the port. This feature controls
network access of a host based on authenticating its MAC
address. Once authorised, the host is allowed access to the
network. If unauthorised, the port can be configured to deny
access to this MAC address or to allow some access depending
upon the port VLAN and QoS configuration.
Where access is allowed, the MAC address is added to the Secure
Address Table.
macAddressOrUserLoginSecure(9) This selects both the macAddressWithRadius and
userLoginSecure modes together such that either or both are allowed to
authorised access. Where both authorised access, userLoginSecure takes
precedence.
macAddressElseUserLoginSecure(10) This selects both the macAddressWithRadius and
userLoginSecure modes together such that the MAC address is first
authenticated and only if this fails does the userLoginSecure then attempt
user authentication.
userLoginSecureExt(11) Access to the port is denied until the port client
is authorised (by 802.1X or other authentication mechanism).
When the client is authorised, the MAC address is added to the
Secure Address Table.
The hh3cSecureNumberAddresses is restricted by the value of hh3cSecureMaximumAddresses
automatically when this mode is entered.
Any existing MAC addresses in the Secure Address Table are deleted.
Need To Know and Intrusion Action depends on hh3cSecureNeedToKnowMode
and hh3cSecureIntrusionAction respectively. Learning is disabled.
macAddressOrUserLoginSecureExt(12) This selects both the macAddressWithRadius and
userLoginSecureExt modes together such that either or both are allowed to
authorised access. Where both authorised access, userLoginSecure takes
precedence.
macAddressElseUserLoginSecureExt(13) This selects both the macAddressWithRadius and
userLoginSecureExt modes together such that the MAC address is first
authenticated and only if this fails does the userLoginSecure then attempt
user authentication.
macAddressAndUserLoginSecure(14) This selects both the macAddressWithRadius and
userLoginSecure modes together such that the MAC address is first
authenticated and only if this succeeds does the userLoginSecure then attempt
user authentication.
macAddressAndUserLoginSecureExt(15) This selects both the macAddressWithRadius and
userLoginSecureExt modes together such that the MAC address is first
authenticated and only if this succeeds does the userLoginSecure then attempt
user authentication.
| ||||
| Chh3cSecureNeedToKnowMode | 1.3.6.1.4.1.25506.2.26.1.2.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Attribute to determine which frames are to be forwarded to
this port intact.
1 - Need To Know is not available.
2 - All frames.
3 - Frames addressed to the authorized devices only.
4 - Frames addressed to the authorized devices, plus all broadcast
frames.
5 - Frames addressed to the authorized devices, plus all broadcast
and multicast frames.
6 - As 3 and cannot be changed.
7 - As 4 and cannot be changed.
8 - As 5 and cannot be changed.
9 - Similar to needToKnowWithMulticastsAllowed, but no frames are allowed
when the port has no online users.
If this object returns 1,6,7 or 8, it means that the Need To Know
configuration cannot be changed, and any attempt to write to this object
will cause an error.
| ||||
| Chh3cSecureIntrusionAction | 1.3.6.1.4.1.25506.2.26.1.2.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Attribute to determine the action if an unauthorised device transmits on this port.
| ||||
| Chh3cSecureNumberAddresses | 1.3.6.1.4.1.25506.2.26.1.2.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum number of addresses that the port can learn or store. Reducing this number may cause some addresses to be deleted. This value is set by the user and cannot be automatically changed by the agent. The maximum number will not include and limit the number of static mac addresses that configured by manager. The following relationship must be preserved. hh3cSecureNumberAddressesStored <= hh3cSecureNumberAddresses <= hh3cSecureMaximumAddresses | ||||
| Chh3cSecureNumberAddressesStored | 1.3.6.1.4.1.25506.2.26.1.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The number of addresses that are currently in the AddressTable for this port. If this object has the same value as hh3cSecureNumberAddresses, then no more addresses can be authorised on this port. The number will not include and limit the number of static mac addresses that configured by manager. Those objects are bound by the relationship: hh3cSecureNumberAddressesStored <= hh3cSecureNumberAddresses <= hh3cSecureMaximumAddresses | ||||
| Chh3cSecureMaximumAddresses | 1.3.6.1.4.1.25506.2.26.1.2.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current This indicates the maximum value that hh3cSecureNumberAddresses can be set to. It is dependent on the resources available so may change, eg. if resources are shared between ports, then this value can both increase and decrease. This object must be read before setting hh3cSecureNumberAddresses. Those objects are bound by the relationship: hh3cSecureNumberAddressesStored <= hh3cSecureNumberAddresses <= hh3cSecureMaximumAddresses | ||||
| Thh3cSecureAddressTable | 1.3.6.1.4.1.25506.2.26.1.2.2 | NA | ||
table · not-accessible · current This table stores the MAC addresses assigned to each port. This table can be written to by the agent as well as the management station. | ||||
| Rhh3cSecureAddressEntry | 1.3.6.1.4.1.25506.2.26.1.2.2.1 | NA | ||
row · not-accessible · current This table allows multiple addresses to be assigned to each secure port. It is indexed using the objects ifIndex, hh3cSecureAddrMAC and hh3cSecureVlanID. | ||||
| Chh3cSecureAddrMAC | 1.3.6.1.4.1.25506.2.26.1.2.2.1.1 | MacAddress | AN | |
column · MacAddress · accessible-for-notify · current The MAC address of a station assigned to this port. This is the second index into the hh3cSecureAddressTable. | ||||
| Chh3cSecureAddrVlanID | 1.3.6.1.4.1.25506.2.26.1.2.2.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The Vlan ID associate with the port and the MAC address. This is the third index into the hh3cSecureAddressTable. | ||||
| Chh3cSecureAddrMACStatus | 1.3.6.1.4.1.25506.2.26.1.2.2.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The state of the mac address assigned to this port.
addressBlackhole (1) the mac address is a blackhole address,
Each packet whose source address is equal to this address will be
dropped by the agent.
addressUserConfig (2) the mac address configed by user with this state
are preserved across power cycles and resets.
addressDot1xAuth (3) the mac address is authorized by 802.1x authenticator,
User can not configure this mac address. This value is used for GET
and GETNEXT operation.
addressRALM (4) the mac address is authorized by RALM authenticator,
User can not configure this mac address. This value is used for GET
and GETNEXT operation.
| ||||
| Chh3cSecureAddrRowStatus | 1.3.6.1.4.1.25506.2.26.1.2.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current This manages the creation and deletion or rows, and shows
the current status of the indexed MAC address. This object has the
following values.
active(1) The indexed MAC address is authorised on this port.
notInService(2) Not Supported.
notReady(3) Not Supported.
createAndGo(4) Assign a new MAC address to the port and authorise
immediately.
createAndWait(5) Not Supported.
destroy(6) Delete this entry.
When creating a new entry, index a new row and use createAndGo(4).
When reading this object, only active(1) will be
returned. | ||||
| Thh3cSecureOUITable | 1.3.6.1.4.1.25506.2.26.1.2.3 | NA | ||
table · not-accessible · current This table stores the OUI values for OUI based authentication. | ||||
| Rhh3cSecureOUIEntry | 1.3.6.1.4.1.25506.2.26.1.2.3.1 | NA | ||
| Chh3cSecureOUIIndex | 1.3.6.1.4.1.25506.2.26.1.2.3.1.1 | Integer32 (1..1024) | NA | |
column · Integer32 (1..1024) · not-accessible · current The index number. This is the first index into the hh3cSecureOUITable. | ||||
| Chh3cSecureOUI | 1.3.6.1.4.1.25506.2.26.1.2.3.1.2 | OCTET STRING (SIZE (3)) | RC | |
column · OCTET STRING (SIZE (3)) · read-create · current The OUI value for an authorised device. | ||||
| Chh3cSecureOUIRowStatus | 1.3.6.1.4.1.25506.2.26.1.2.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This manages the creation and deletion of rows, and shows
the current status of the entry.
active(1) The indexed OUI value is authorised.
notInService(2) Not Supported.
notReady(3) Not Supported.
createAndGo(4) Assign a new OUI to the unit and authorise
immediately.
createAndWait(5) Not Supported.
destroy(6) Delete this entry.
When creating a new entry, index a new row and use createAndGo(4) .
When reading this object, only active(1) will be returned. | ||||
| Thh3cSecureBindingTable | 1.3.6.1.4.1.25506.2.26.1.2.4 | NA | ||
table · not-accessible · current This table stores the elements of binding rules include the MAC addresses, the IP address and the port. Only the frame exactly matching the binding rules can be forwarded. This table can be written to by the agent as well as the management station. | ||||
| Rhh3cSecureBindingEntry | 1.3.6.1.4.1.25506.2.26.1.2.4.1 | NA | ||
row · not-accessible · current This table allows multiple binding rules. It is indexed using the object hh3cSecureBindingIndex. | ||||
| Chh3cSecureBindingIndex | 1.3.6.1.4.1.25506.2.26.1.2.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index number. This is the first index into the hh3cSecureBindingTable. | ||||
| Chh3cSecureBindingPort | 1.3.6.1.4.1.25506.2.26.1.2.4.1.2 | Integer32 | RC | |
column · Integer32 · read-create · current The port number of the port bound with the IP address and the MAC address. | ||||
| Chh3cSecureBindingAddrMAC | 1.3.6.1.4.1.25506.2.26.1.2.4.1.3 | MacAddress | RC | |
column · MacAddress · read-create · current The MAC address bound with the port and the IP address. | ||||
| Chh3cSecureBindingAddrIp | 1.3.6.1.4.1.25506.2.26.1.2.4.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The IP address bound with the port and the MAC address. | ||||
| Chh3cSecureBindingRowStatus | 1.3.6.1.4.1.25506.2.26.1.2.4.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current This manages the creation and deletion or rows, and shows
status of the entry. This object has the following values.
active(1) The indexed MAC address is authorised on this port.
notInService(2) Not Supported.
notReady(3) Not Supported.
createAndGo(4) Assign a new MAC address to the port and authorise
immediately.
createAndWait(5) Not Supported.
destroy(6) Delete this entry.
When creating a new entry, index a new row and use createAndGo(4).
When reading this object, only active(1) will be
returned. | ||||
| Thh3cSecureAssignTable | 1.3.6.1.4.1.25506.2.26.1.2.5 | NA | ||
table · not-accessible · current Table of port assignment management information about authorised user. | ||||
| Rhh3cSecureAssignEntry | 1.3.6.1.4.1.25506.2.26.1.2.5.1 | NA | ||
row · not-accessible · current An entry (conceptual row) representing information about port assignment about authorised user.
| ||||
| Chh3cSecureAssignEnable | 1.3.6.1.4.1.25506.2.26.1.2.5.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The user-based port configuration control. Setting this attribute TRUE causes the port to be configured with any configuration parameters supplied by the authentication server. Setting this attribute to FALSE causes any configuration parameters supplied by the authentication server to be ignored. | ||||
| Chh3cSecureVlanAssignment | 1.3.6.1.4.1.25506.2.26.1.2.5.1.2 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current The VLAN membership assigned to the port for the authorised user. This contains the actual value received from the authentication server. This object will contain a null value if there is no user authorised to access the port or if the authorised user was not assigned a VLAN membership. | ||||
| Nhh3cPortSecurityNotifications | 1.3.6.1.4.1.25506.2.26.1.3 | |||
| !hh3cSecureAddressLearned | 1.3.6.1.4.1.25506.2.26.1.3.1 | |||
notification · current This trap is sent when a new station has been learned. The port on which the address was received is the first object, and the MAC address of the learned station is in the second object.
| ||||
| !hh3cSecureViolation | 1.3.6.1.4.1.25506.2.26.1.3.2 | |||
notification · current This trap is sent whenever a security violation has occurred. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. ifAdminStatus indicates if the port has been disabled because of the violation. The implementation may not send violation traps from the same port at intervals of less than 5 seconds.
| ||||
| !hh3cSecureLoginFailure | 1.3.6.1.4.1.25506.2.26.1.3.3 | |||
notification · current This trap is sent whenever a user network access authentication has failed. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The dot1xAuthSessionUserName is the identity supplied during the user authentication. | ||||
| !hh3cSecureLogon | 1.3.6.1.4.1.25506.2.26.1.3.4 | |||
notification · current This trap is sent when a new session is started for an authorised port user. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The dot1xAuthSessionUserName is the identity supplied during the user authentication. The dot1xAuthSessionAuthenticMethod indicates how the user was authorised. The hh3cSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session activation. | ||||
| !hh3cSecureLogoff | 1.3.6.1.4.1.25506.2.26.1.3.5 | |||
notification · current This trap is sent when a user session is terminated. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The dot1xAuthSessionUserName is the identity supplied during the user authentication. The dot1xAuthSessionTerminateCause indicates the reason why the session was terminated. The hh3cSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session termination. | ||||
| !hh3cSecureRalmLoginFailure | 1.3.6.1.4.1.25506.2.26.1.3.6 | |||
notification · current This trap is sent whenever a user network access authentication has failed. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The authentication mode indicates how the user was authorised. The hh3cSecureRalmAuthUsername is the identity supplied during the user authentication. | ||||
| !hh3cSecureRalmLogon | 1.3.6.1.4.1.25506.2.26.1.3.7 | |||
notification · current This trap is sent when a new session is started for an authorised port user. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The authentication mode indicates how the user was authorised. The hh3cSecureRalmAuthUsername is the identity supplied during the user authentication. The hh3cSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session activation. | ||||
| !hh3cSecureRalmLogoff | 1.3.6.1.4.1.25506.2.26.1.3.8 | |||
notification · current This trap is sent when a new session is started for an authorised port user. The port on which the violation occured is the first object, and the MAC address of the offending station is in the second object. The authentication mode indicates how the user was authorised. The hh3cSecureRalmAuthUsername is the identity supplied during the user authentication. The hh3cSecurePortVlanMembershipList object identifies the VLAN membership assigned to the port on session activation. | ||||
| Nhh3cPortSecurityTrapsV2 | 1.3.6.1.4.1.25506.2.26.1.4 | |||
| Nhh3cPortSecurityTrapsV2Prefix | 1.3.6.1.4.1.25506.2.26.1.4.0 | |||
| !hh3cSecureIPv4Change | 1.3.6.1.4.1.25506.2.26.1.4.0.1 | |||
notification · current This trap is sent when an 802.1X authentication user IPv4 address changes. | ||||
| !hh3cSecureIPv6Change | 1.3.6.1.4.1.25506.2.26.1.4.0.2 | |||
notification · current This trap is sent when an 802.1X authentication user IPv6 address changes. | ||||
| !hh3cSecureRalmIPv4Change | 1.3.6.1.4.1.25506.2.26.1.4.0.3 | |||
notification · current This trap is sent when a MAC authentication user IPv4 address changes. | ||||
| !hh3cSecureRalmIPv6Change | 1.3.6.1.4.1.25506.2.26.1.4.0.4 | |||
notification · current This trap is sent when a MAC authentication user IPv6 address changes. | ||||
Traps / Notifications
- hh3cSecureAddressLearned
1.3.6.1.4.1.25506.2.26.1.3.1 - hh3cSecureIPv4Change
1.3.6.1.4.1.25506.2.26.1.4.0.1 - hh3cSecureIPv6Change
1.3.6.1.4.1.25506.2.26.1.4.0.2 - hh3cSecureLoginFailure
1.3.6.1.4.1.25506.2.26.1.3.3 - hh3cSecureLogoff
1.3.6.1.4.1.25506.2.26.1.3.5 - hh3cSecureLogon
1.3.6.1.4.1.25506.2.26.1.3.4 - hh3cSecureRalmIPv4Change
1.3.6.1.4.1.25506.2.26.1.4.0.3 - hh3cSecureRalmIPv6Change
1.3.6.1.4.1.25506.2.26.1.4.0.4 - hh3cSecureRalmLoginFailure
1.3.6.1.4.1.25506.2.26.1.3.6 - hh3cSecureRalmLogoff
1.3.6.1.4.1.25506.2.26.1.3.8 - hh3cSecureRalmLogon
1.3.6.1.4.1.25506.2.26.1.3.7 - hh3cSecureViolation
1.3.6.1.4.1.25506.2.26.1.3.2