HH3C-PBR-MIB
H3CThis MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing.
snmptranslate -m HH3C-PBR-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-PBR-MIB <host> 1.3.6.1.4.1.25506.2.113Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cPBR | 1.3.6.1.4.1.25506.2.113 | |||
identity This MIB contains objects to manage the configuration and information of PBR. It routes IP packets by user defined policy other than normal destination address based routing. | ||||
| Nhh3cPBRObjects | 1.3.6.1.4.1.25506.2.113.1 | |||
| Nhh3cPBRGlobal | 1.3.6.1.4.1.25506.2.113.1.1 | |||
| Shh3cPBRNexthopTrapEnabled | 1.3.6.1.4.1.25506.2.113.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current The value is a global setting only for IPv4 PBR. If the value is set to 'false', the feature is disabled. | ||||
| Shh3cPBRLocalPolicy | 1.3.6.1.4.1.25506.2.113.1.1.2 | DisplayString (SIZE (0..19)) | RW | |
scalar · DisplayString (SIZE (0..19)) · read-write · current The value is a global setting. An existing policy name setting enables local PBR for IPv4 packets initiated by the device. Only one policy can be applied locally. An empty name setting disables the feature. | ||||
| Shh3cPBRIPv6NexthopTrapEnabled | 1.3.6.1.4.1.25506.2.113.1.1.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current The value is a global setting only for IPv6 PBR. If the value is set to 'false', the feature is disabled. | ||||
| Nhh3cPBRMibTrap | 1.3.6.1.4.1.25506.2.113.1.2 | |||
| Nhh3cPBRTrapObjects | 1.3.6.1.4.1.25506.2.113.1.2.1 | |||
| Shh3cPBRNexthopAddrType | 1.3.6.1.4.1.25506.2.113.1.2.1.1 | InetAddressType | AN | |
scalar · InetAddressType · accessible-for-notify · current Indicating address type of hh3cPBRNexthopAddr, which can be IPv4 or IPv6. | ||||
| Shh3cPBRNexthopAddr | 1.3.6.1.4.1.25506.2.113.1.2.1.2 | InetAddress | AN | |
scalar · InetAddress · accessible-for-notify · current The involved next hop IP address of trap information. | ||||
| Nhh3cPBRTraps | 1.3.6.1.4.1.25506.2.113.1.2.2 | |||
| Nhh3cPBRTrapsPrefix | 1.3.6.1.4.1.25506.2.113.1.2.2.0 | |||
| !hh3cPBRNexthopFailedTrap | 1.3.6.1.4.1.25506.2.113.1.2.2.0.1 | |||
notification · current When the next hop of PBR apply clause became unreachable according to routing information, trap is generated and is sent to the remote monitoring device. | ||||
| Nhh3cPBRTables | 1.3.6.1.4.1.25506.2.113.2 | |||
| Thh3cPBRMibPolicyNodeTable | 1.3.6.1.4.1.25506.2.113.2.1 | NA | ||
table · not-accessible · current A table for PBR nodes. | ||||
| Rhh3cPBRMibPolicyNodeEntry | 1.3.6.1.4.1.25506.2.113.2.1.1 | NA | ||
row · not-accessible · current An entry for PBR nodes. | ||||
| Chh3cPBRMibPolicyNodeAddrType | 1.3.6.1.4.1.25506.2.113.2.1.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current Address type of policy node, which can be IPv4 or IPv6, Dual-stack. | ||||
| Chh3cPBRMibPolicyName | 1.3.6.1.4.1.25506.2.113.2.1.1.2 | DisplayString (SIZE (1..19)) | NA | |
column · DisplayString (SIZE (1..19)) · not-accessible · current Policy name of PBR node. | ||||
| Chh3cPBRMibPolicyNodeId | 1.3.6.1.4.1.25506.2.113.2.1.1.3 | Integer32 (0..65535) | NA | |
column · Integer32 (0..65535) · not-accessible · current Sequence identifier of PBR node. | ||||
| Chh3cPBRMibPolicyNodeMode | 1.3.6.1.4.1.25506.2.113.2.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Mode of PBR node. If the mode of a node is marked as true, the packets that meet the matching rules are processed by action rules in the node. If the mode of a node is marked as false, the packets that meet the matching rules are sent back to the normal forwarding path. | ||||
| Chh3cPBRMibPolicyNodeRowStatus | 1.3.6.1.4.1.25506.2.113.2.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. | ||||
| Chh3cPBRMibMinPktLen | 1.3.6.1.4.1.25506.2.113.2.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies the minimum IP packet length in the range of 1 and 65535. Value 0 indicates that this rule is not set. | ||||
| Chh3cPBRMibMaxPktLen | 1.3.6.1.4.1.25506.2.113.2.1.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies the maximum IP packet length in the range of 1 and 65535. The maximum length must be no less than the minimum length. The maximum and the minimum lengths must be both configured. Value 0 indicates that this rule is not set. | ||||
| Chh3cPBRMibQosId | 1.3.6.1.4.1.25506.2.113.2.1.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies a local Quality of Service(QoS) ID in the range of 1 and 4095. Value 0 indicates that this rule is not set. | ||||
| Chh3cPBRMibQosIdMode | 1.3.6.1.4.1.25506.2.113.2.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current The mode of the QoS Local ID. The default value is normal.
| ||||
| Chh3cPBRMibVxlanId | 1.3.6.1.4.1.25506.2.113.2.1.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current Specifies a VXLAN ID in the range of 0 to 16777215. Value -1 indicates that this rule is not set. | ||||
| Chh3cPBRMibDescription | 1.3.6.1.4.1.25506.2.113.2.1.1.11 | DisplayString (SIZE (0..127)) | RW | |
column · DisplayString (SIZE (0..127)) · read-write · current A description for a policy node. | ||||
| Chh3cPBRMibApplyContinue | 1.3.6.1.4.1.25506.2.113.2.1.1.12 | TruthValue | RW | |
column · TruthValue · read-write · current Use apply continue to compare packets with the next policy node upon failure on the current node. Value FALSE indicates that this action is not set. | ||||
| Chh3cPBRMibApplyFailDropNextHop | 1.3.6.1.4.1.25506.2.113.2.1.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current Configure the policy node to drop matching packets when the next hop is invalid. If no next hops are specified on the policy node, this command drops all packets that match the node. Value FALSE indicates that this action is not set. | ||||
| Chh3cPBRMibApplyIpDf | 1.3.6.1.4.1.25506.2.113.2.1.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current Sets the Don't Fragment(DF) bit in the IP header of matching packets. The value can be 0 or 1. Value -1 indicates that this action is not set. | ||||
| Chh3cPBRMibApplyLoadShareNextHop | 1.3.6.1.4.1.25506.2.113.2.1.1.15 | TruthValue | RW | |
column · TruthValue · read-write · current Enables load sharing among multiple next hops. Value FALSE indicates that this action is not set. | ||||
| Chh3cPBRMibApplyLoadShareOutIf | 1.3.6.1.4.1.25506.2.113.2.1.1.16 | TruthValue | RW | |
column · TruthValue · read-write · current Enables load sharing among multiple output interfaces. Value FALSE indicates that this action is not set. | ||||
| Chh3cPBRMibApplyLSDefaultNextHop | 1.3.6.1.4.1.25506.2.113.2.1.1.17 | TruthValue | RW | |
column · TruthValue · read-write · current Enables load sharing among multiple default next hops. Value FALSE indicates that this action is not set. | ||||
| Chh3cPBRMibApplyLSDefaultOutIf | 1.3.6.1.4.1.25506.2.113.2.1.1.18 | TruthValue | RW | |
column · TruthValue · read-write · current Enables load sharing among multiple default output interfaces. Value FALSE indicates that this action is not set. | ||||
| Chh3cPBRMibApplyStatisticsValue | 1.3.6.1.4.1.25506.2.113.2.1.1.19 | TruthValue | RW | |
column · TruthValue · read-write · current Use apply statistics to enable match counting on a policy node. Value FALSE indicates that this action is not set. | ||||
| Thh3cPBRMibIfPolicyTable | 1.3.6.1.4.1.25506.2.113.2.2 | NA | ||
table · not-accessible · current A table for interfaces being applied with PBR nodes with the same policy name. | ||||
| Rhh3cPBRMibIfPolicyEntry | 1.3.6.1.4.1.25506.2.113.2.2.1 | NA | ||
row · not-accessible · current An entry for reference relation between interface and policy nodes. | ||||
| Chh3cPBRMibPolicyAddressType | 1.3.6.1.4.1.25506.2.113.2.2.1.1 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current Address type of policy node, which can be IPv4 or IPv6, Dual-stack. | ||||
| Chh3cPBRMibAppliedPolicyName | 1.3.6.1.4.1.25506.2.113.2.2.1.2 | DisplayString (SIZE (1..19)) | RC | |
column · DisplayString (SIZE (1..19)) · read-create · current Policy name of PBR nodes. | ||||
| Chh3cPBRMibIfPolicyRowStatus | 1.3.6.1.4.1.25506.2.113.2.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. | ||||
| Chh3cPBRMibIfPolicyShareMode | 1.3.6.1.4.1.25506.2.113.2.2.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Applies the policy in resource sharing mode. In this mode, all interfaces on an interface card with the same policy applied share one hardware resource. | ||||
| Thh3cPBRMibMatchAclTable | 1.3.6.1.4.1.25506.2.113.2.3 | NA | ||
table · not-accessible · current A table for ACLs being used by a policy node. Only one ACL can be used within a node at most. | ||||
| Rhh3cPBRMibMatchAclEntry | 1.3.6.1.4.1.25506.2.113.2.3.1 | NA | ||
row · not-accessible · current An entry for policy node that uses an ACL group as its if-match rule. | ||||
| Chh3cPBRMibAclGroupId | 1.3.6.1.4.1.25506.2.113.2.3.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current Index of number-acl group. Setting -1 indicates closing this rule. When ACLName is configured with a valid value, value -1 will be returned for ACLNumber. | ||||
| Chh3cPBRMibAclGroupName | 1.3.6.1.4.1.25506.2.113.2.3.1.2 | OCTET STRING (SIZE (0..63)) | RW | |
column · OCTET STRING (SIZE (0..63)) · read-write · current ACL match criterion by name. The ACL name must start with letter a to z or A to Z. The ACL name cannot be all in any combination of upper-case and lower-case letters. To delete an ACL match criterion, you must configure the value for ACLNumber as -1. | ||||
| Chh3cPBRMibAclGroupVersion | 1.3.6.1.4.1.25506.2.113.2.3.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The type of the ACL. The hh3cPBRMibAclGroupVersion can only be configured when the policy node type is Dual-stack, and cannot be empty.
| ||||
| Thh3cPBRMibApplyPrecedenceTable | 1.3.6.1.4.1.25506.2.113.2.4 | NA | ||
table · not-accessible · current A table for precedence values being used by a policy node. Only one precedence value can be used within a node at most. | ||||
| Rhh3cPBRMibApplyPrecedenceEntry | 1.3.6.1.4.1.25506.2.113.2.4.1 | NA | ||
row · not-accessible · current An entry for policy node with an action to set IP precedence for matching packets. | ||||
| Chh3cPBRMibApplyPrecedenceValue | 1.3.6.1.4.1.25506.2.113.2.4.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current Value of precedence being applied on IP header. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate precedence(2) flash Specify flash precedence(3) flash-override Specify flash-override precedence(4) critical Specify critical precedence(5) internet Specify internetwork control precedence(6) network Specify network control precedence(7) Setting -1 indicates closing this action. | ||||
| Thh3cPBRMibApplyNexthopTable | 1.3.6.1.4.1.25506.2.113.2.5 | NA | ||
table · not-accessible · current A table for next hop actions being used by a policy node. | ||||
| Rhh3cPBRMibApplyNexthopEntry | 1.3.6.1.4.1.25506.2.113.2.5.1 | NA | ||
row · not-accessible · current An entry for policy node with an action to set next hop for matching packets. | ||||
| Chh3cPBRMibApplyNexthopIndex | 1.3.6.1.4.1.25506.2.113.2.5.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current Index of next hop for the apply next hop action. | ||||
| Chh3cPBRMibApplyNexthopVpnName | 1.3.6.1.4.1.25506.2.113.2.5.1.2 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of VPN instance where apply next hop action is used. | ||||
| Chh3cPBRMibApplyNexthopAddressType | 1.3.6.1.4.1.25506.2.113.2.5.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current Address type of hh3cPBRMibApplyNexthopAddress, which can be IPv4 or IPv6. | ||||
| Chh3cPBRMibApplyNexthopAddress | 1.3.6.1.4.1.25506.2.113.2.5.1.4 | InetAddress | RC | |
column · InetAddress · read-create · current Next hop IP address of apply next hop action. | ||||
| Chh3cPBRMibApplyNexthopTrackId | 1.3.6.1.4.1.25506.2.113.2.5.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Identifier of track object related with next hop. Specifies a track entry by its number in the range of 1 to 1024. Setting 0 indicates closing this function. | ||||
| Chh3cPBRMibApplyNexthopDirect | 1.3.6.1.4.1.25506.2.113.2.5.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current Direct route attribute of next hop according to route information. | ||||
| Chh3cPBRMibApplyNexthopRowStatus | 1.3.6.1.4.1.25506.2.113.2.5.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. | ||||
| Chh3cPBRMibApplyNexthopInboundVpn | 1.3.6.1.4.1.25506.2.113.2.5.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies the VPN instance where the inbound interface belongs. If the value is set to TRUE, the VPN instance name will be ignored. | ||||
| Chh3cPBRMibApplyNexthopWeight | 1.3.6.1.4.1.25506.2.113.2.5.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies a load sharing weight in the range of 1 and 100 for the next hop. | ||||
| Chh3cPBRMibApplyNexthopPathId | 1.3.6.1.4.1.25506.2.113.2.5.1.10 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies a service chain by its path ID in the range of 1 and 16777215. | ||||
| Chh3cPBRMibApplyNexthopPathIndex | 1.3.6.1.4.1.25506.2.113.2.5.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies a node in the service chain as a next hop by its index in the range of 1 and 255. | ||||
| Thh3cPBRMibApplyDefaultNexthopTable | 1.3.6.1.4.1.25506.2.113.2.6 | NA | ||
table · not-accessible · current A table for default next hop actions being used by a policy node. | ||||
| Rhh3cPBRMibApplyDefaultNexthopEntry | 1.3.6.1.4.1.25506.2.113.2.6.1 | NA | ||
row · not-accessible · current An entry for policy node with an action to set default next hop for matching packets. | ||||
| Chh3cPBRMibApplyDefaultNexthopIndex | 1.3.6.1.4.1.25506.2.113.2.6.1.1 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current Index of default next hop for the apply default next hop action. | ||||
| Chh3cPBRMibApplyDefaultNexthopVpnName | 1.3.6.1.4.1.25506.2.113.2.6.1.2 | DisplayString (SIZE (0..31)) | RC | |
column · DisplayString (SIZE (0..31)) · read-create · current Name of VPN instance where apply default next hop action is used. | ||||
| Chh3cPBRMibApplyDefaultNexthopAddressType | 1.3.6.1.4.1.25506.2.113.2.6.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current Address type of hh3cPBRMibApplyDefaultNexthopAddress, which can be IPv4 or IPv6. | ||||
| Chh3cPBRMibApplyDefaultNexthopAddress | 1.3.6.1.4.1.25506.2.113.2.6.1.4 | InetAddress | RC | |
column · InetAddress · read-create · current Next hop IP address of apply default next hop action. | ||||
| Chh3cPBRMibApplyDefaultNexthopTrackId | 1.3.6.1.4.1.25506.2.113.2.6.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Identifier of track object related with default next hop. Specifies a track entry by its number in the range of 1 to 1024. Setting 0 indicates closing this function. | ||||
| Chh3cPBRMibApplyDefaultNexthopDirect | 1.3.6.1.4.1.25506.2.113.2.6.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current Direct route attribute of apply default next hop address according to route information. | ||||
| Chh3cPBRMibApplyDefaultNexthopRowStatus | 1.3.6.1.4.1.25506.2.113.2.6.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status of this table entry. Three actions are used: active, createAndGo, and destroy. | ||||
| Chh3cPBRMibApplyDefNexthopInbVpn | 1.3.6.1.4.1.25506.2.113.2.6.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies the VPN instance where the inbound interface belongs. If the value is set to TRUE, the VPN instance name will be ignored. | ||||
| Chh3cPBRMibApplyDefNexthopPathId | 1.3.6.1.4.1.25506.2.113.2.6.1.9 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies a service chain by its path ID in the range of 1 and 16777215. | ||||
| Chh3cPBRMibApplyDefNexthopPathInd | 1.3.6.1.4.1.25506.2.113.2.6.1.10 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies a node in the service chain as a default next hop by its index in the range of 1 and 255. | ||||
Traps / Notifications
- hh3cPBRNexthopFailedTrap
1.3.6.1.4.1.25506.2.113.1.2.2.0.1