HH3C-NTP-MIB
H3CThis MIB provides mechanisms to monitor a NTP server.
snmptranslate -m HH3C-NTP-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-NTP-MIB <host> 1.3.6.1.4.1.25506.8.22Imports
| HH3C-OID-MIB | hh3cRhw |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cNTP | 1.3.6.1.4.1.25506.8.22 | |||
identity This MIB provides mechanisms to monitor a NTP server. | ||||
| Nhh3cNTPSystemMIB | 1.3.6.1.4.1.25506.8.22.1 | |||
| Nhh3cNTPSystemMIBObjects | 1.3.6.1.4.1.25506.8.22.1.1 | |||
| Shh3cNTPSysLeap | 1.3.6.1.4.1.25506.8.22.1.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Leap Indicator (LI): This is a two-bit code warning of an impending leap second to be inserted/deleted in the last minute of the current day, with bit 0 and bit 1, respectively, coded as follows: 00, no warning 01, last minute has 61 seconds 10, last minute has 59 seconds) 11, alarm condition (clock not synchronized).
| ||||
| Shh3cNTPSysStratum | 1.3.6.1.4.1.25506.8.22.1.1.2 | Integer32 (1..16) | RO | |
scalar · Integer32 (1..16) · read-only · current This is an eight-bit integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-255, secondary reference (via NTP) | ||||
| Shh3cNTPSysPrecision | 1.3.6.1.4.1.25506.8.22.1.1.3 | Integer32 (-20..20) | RO | |
scalar · Integer32 (-20..20) · read-only · current Precision : This is a signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms). | ||||
| Shh3cNTPSysRootdelay | 1.3.6.1.4.1.25506.8.22.1.1.4 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Root Delay : This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew. | ||||
| Shh3cNTPSysRootdispersion | 1.3.6.1.4.1.25506.8.22.1.1.5 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization subnet, in milliseconds. Only positive values greater than zero are possible. | ||||
| Shh3cNTPSysRefid | 1.3.6.1.4.1.25506.8.22.1.1.6 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Reference Clock Identifier : This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string. Stratum, Code, Meaning 0, DCN, DCN routing protocol 0, TSP, TSP time protocol 1, ATOM, Atomic clock (calibrated) 1, WWVB, WWVB LF (band 5) radio 1, GOES, GOES UHF (band 9) satellite 1, WWV, WWV HF (band 7) radio | ||||
| Shh3cNTPSysReftime | 1.3.6.1.4.1.25506.8.22.1.1.7 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Reference Timestamp : This is the local time, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is zero. | ||||
| Shh3cNTPSysPoll | 1.3.6.1.4.1.25506.8.22.1.1.8 | Integer32 (-20..20) | RO | |
scalar · Integer32 (-20..20) · read-only · current Poll Interval : This is a signed integer indicating the minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of six indicates a minimum interval of 64 seconds. | ||||
| Shh3cNTPSysPeer | 1.3.6.1.4.1.25506.8.22.1.1.9 | Integer32 (0..2147483647) | RO | obsolete |
scalar · Integer32 (0..2147483647) · read-only · obsolete This is a selector identifying the current synchronization source. Usually this will be a pointer to a structure containing the peer variables. The special value NULL indicates There is no currently valid synchronization source. hh3cNTPSysPeer is replaced by hh3cNTPSysSrcPeer. Reading hh3cNTPSysPeer might fail because the syntax value range is limited, for example, when the synchronization source IP address is a Class C address. | ||||
| Shh3cNTPSysState | 1.3.6.1.4.1.25506.8.22.1.1.10 | INTEGER | RO | |
scalar · INTEGER · read-only · current This is a integer indicating the state of local clock.
| ||||
| Shh3cNTPSysOffset | 1.3.6.1.4.1.25506.8.22.1.1.11 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current The offset of two clocks is the time difference between them, in milliseconds. | ||||
| Shh3cNTPSysDrift | 1.3.6.1.4.1.25506.8.22.1.1.12 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current Real clocks exhibit some variation in skew (second derivative of offset with time), which is called drift. | ||||
| Shh3cNTPSysCompliance | 1.3.6.1.4.1.25506.8.22.1.1.13 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current This is a string indicating the system error. | ||||
| Shh3cNTPSysClock | 1.3.6.1.4.1.25506.8.22.1.1.14 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current This is the current local time, in timestamp format. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used. | ||||
| Shh3cNTPSysStabil | 1.3.6.1.4.1.25506.8.22.1.1.15 | OCTET STRING (SIZE (1..128)) | RO | |
scalar · OCTET STRING (SIZE (1..128)) · read-only · current This is a indicating that stability of a clock is how well it can maintain a constant frequency. | ||||
| Shh3cNTPSysAuthenticate | 1.3.6.1.4.1.25506.8.22.1.1.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current This is a integer indicating that system support authentication.
| ||||
| Shh3cNTPSysPollSec | 1.3.6.1.4.1.25506.8.22.1.1.17 | Integer32 (2..1048576) | RW | |
scalar · Integer32 (2..1048576) · read-write · current PollSec Interval : This is a integer indicating the minimum interval between transmitted messages. For instance, a value of six indicates a minimum interval of 6 seconds. | ||||
| Shh3cNTPSysClockSec | 1.3.6.1.4.1.25506.8.22.1.1.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current This is the current local time, in integer format. Local time is derived from the hardware clock of the particular machine and increments at intervals depending on the design used. | ||||
| Shh3cNTPServerIP | 1.3.6.1.4.1.25506.8.22.1.1.19 | IpAddress | RW | |
scalar · IpAddress · read-write · current The NTP server ip address. It must be a unicast address, rather than a broadcast address, a multicast address or the IP address of the local clock. To delete a configured NTP server ip address, please set hh3cNTPServerIP to 0. | ||||
| Shh3cNTPSysSrcPeer | 1.3.6.1.4.1.25506.8.22.1.1.20 | Unsigned32 (0..4294967295) | RO | |
scalar · Unsigned32 (0..4294967295) · read-only · current This is a selector identifying the current synchronization source. Usually this will be a unsigned integer containing the peer variables. The special value 0 indicates There is no currently valid synchronization source. This node will replace hh3cNTPSysPeer, because its value range is unlimited, and data type is changed from Integer32 to Unsigned32. | ||||
| Shh3cNTPSysOldServerIP | 1.3.6.1.4.1.25506.8.22.1.1.21 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current The Old NTP server ip address. | ||||
| Shh3cNTPSysSrcVpnName | 1.3.6.1.4.1.25506.8.22.1.1.22 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current The NTP server VPN Name. | ||||
| Shh3cNTPSysOldSrcVpnName | 1.3.6.1.4.1.25506.8.22.1.1.23 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current The Old NTP server VPN Name. | ||||
| Shh3cNTPSysMaxDynamicSessions | 1.3.6.1.4.1.25506.8.22.1.1.24 | Unsigned32 (0..4294967295) | AN | |
scalar · Unsigned32 (0..4294967295) · accessible-for-notify · current Maximum number of NTP dynamic sessions. | ||||
| Shh3cNTPSysMaxSessions | 1.3.6.1.4.1.25506.8.22.1.1.25 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current Maximum number of NTP sessions. | ||||
| Shh3cNTPSysOldStratum | 1.3.6.1.4.1.25506.8.22.1.1.26 | Integer32 (1..16) | AN | |
scalar · Integer32 (1..16) · accessible-for-notify · current The old the stratum level of the local clock. | ||||
| Shh3cNTPSysTimeOffsetThres | 1.3.6.1.4.1.25506.8.22.1.1.27 | OCTET STRING (SIZE (1..128)) | AN | |
scalar · OCTET STRING (SIZE (1..128)) · accessible-for-notify · current Time offset alarm threshold, in milliseconds. | ||||
| Shh3cNTPSysTimeOffsetLimit | 1.3.6.1.4.1.25506.8.22.1.1.28 | OCTET STRING (SIZE (1..128)) | AN | |
scalar · OCTET STRING (SIZE (1..128)) · accessible-for-notify · current Clock synchronization offset threshold, in milliseconds. | ||||
| Nhh3cNTPSystemMIBTraps | 1.3.6.1.4.1.25506.8.22.1.2 | |||
| Nhh3cNTPSystemMIBTrapPrefix | 1.3.6.1.4.1.25506.8.22.1.2.0 | |||
| !hh3cNTPSysStateChangeTrap | 1.3.6.1.4.1.25506.8.22.1.2.0.1 | |||
notification · current The trap is generated when The NTP local clock state changed. | ||||
| !hh3cNTPSysPeerChangeTrap | 1.3.6.1.4.1.25506.8.22.1.2.0.2 | |||
notification · current The trap is generated when The peer specified by NTP has changed. | ||||
| !hh3cNTPDynSessionLimit | 1.3.6.1.4.1.25506.8.22.1.2.0.3 | |||
notification · current The trap is generated when The number of NTP dynamic sessions has reached the upper limit.
| ||||
| !hh3cNTPDynSessionLimitResume | 1.3.6.1.4.1.25506.8.22.1.2.0.4 | |||
notification · current The trap is generated when The NTP dynamic session number below the limit.
| ||||
| !hh3cNTPSessionLimit | 1.3.6.1.4.1.25506.8.22.1.2.0.5 | |||
notification · current The trap is generated when the number of NTP sessions reaches the upper limit.
| ||||
| !hh3cNTPSessionLimitResume | 1.3.6.1.4.1.25506.8.22.1.2.0.6 | |||
notification · current The trap is generated when the number of NTP sessions drops below the limit.
| ||||
| !hh3cNTPSynchronizationLost | 1.3.6.1.4.1.25506.8.22.1.2.0.7 | |||
notification · current The trap is generated when the local clock loses synchronization with the NTP server.
| ||||
| !hh3cNTPSynchronizationResume | 1.3.6.1.4.1.25506.8.22.1.2.0.8 | |||
notification · current The trap is generated when the local clock resumes synchronization with the NTP server.
| ||||
| !hh3cNTPSysStratumChange | 1.3.6.1.4.1.25506.8.22.1.2.0.9 | |||
notification · current The trap is generated when the stratum level of the local clock changes. | ||||
| !hh3cNTPTimeOffsetThresExceed | 1.3.6.1.4.1.25506.8.22.1.2.0.10 | |||
notification · current The trap is generated when the time offset between the clock source and the client reaches the threshold. | ||||
| !hh3cNTPTimeOffsetThresResume | 1.3.6.1.4.1.25506.8.22.1.2.0.11 | |||
notification · current The trap is generated when the time offset between the clock source and the client drops below the threshold. | ||||
| !hh3cNTPTimeOffsetLimit | 1.3.6.1.4.1.25506.8.22.1.2.0.12 | |||
notification · current The trap is generated when the time offset between the clock source and the client over the upper limit for clock synchronization. The client will not synchronize with the clock source. | ||||
| !hh3cNTPTimeOffsetLimitResume | 1.3.6.1.4.1.25506.8.22.1.2.0.13 | |||
notification · current The trap is generated when the time offset between the clock source and the client drops below the upper limit for clock synchronization. | ||||
| !hh3cNTPSysLeapChangeTrap | 1.3.6.1.4.1.25506.8.22.1.2.0.14 | |||
notification · current The trap is generated when System Leap Indicator changed after clock update.
| ||||
| !hh3cNTPServerAbnormal | 1.3.6.1.4.1.25506.8.22.1.2.0.15 | |||
notification · current The trap is generated when NTP server state went abnormal.
| ||||
| !hh3cNTPServerNormal | 1.3.6.1.4.1.25506.8.22.1.2.0.16 | |||
notification · current The trap is generated when NTP server state returned to normal.
| ||||
| !hh3cNTPStepSetTimeFailed | 1.3.6.1.4.1.25506.8.22.1.2.0.17 | |||
notification · current The trap is generated upon failure to set system time in the one-step adjustment process. | ||||
| Nhh3cNTPPeerMIB | 1.3.6.1.4.1.25506.8.22.2 | |||
| Nhh3cNTPPeerMIBObjects | 1.3.6.1.4.1.25506.8.22.2.1 | |||
| Thh3cNTPPeerTable | 1.3.6.1.4.1.25506.8.22.2.1.1 | NA | ||
table · not-accessible · current This table provides information on the peers with which the local NTP server has associations. The peers are also NTP servers but running on different hosts. | ||||
| Rhh3cNTPPeerEntry | 1.3.6.1.4.1.25506.8.22.2.1.1.1 | NA | ||
row · not-accessible · current Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. Entries are automatically created when the user configures the NTP server to be associated with remote peers. Similarly entries are deleted when the user removes the peer association from the NTP server. Entries can also be created by the management station by setting values for the following objects: hh3cNTPPeerRemAdr and making the hh3cNTPPeerRowStatus as 'active'. At the least, the management station has to set a value for hh3cNTPPeerRemAdr to make the row active. | ||||
| Chh3cNTPPeerConfig | 1.3.6.1.4.1.25506.8.22.2.1.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable. | ||||
| Chh3cNTPPeerAuthenable | 1.3.6.1.4.1.25506.8.22.2.1.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This is a bit indicating that system support authentication. | ||||
| Chh3cNTPPeerAuthentic | 1.3.6.1.4.1.25506.8.22.2.1.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current This is a bit indicating that message pass authentication which is authentic. | ||||
| Chh3cNTPPeerRemAdr | 1.3.6.1.4.1.25506.8.22.2.1.1.1.4 | IpAddress | NA | |
column · IpAddress · not-accessible · current The IP address of the peer. When creating a new association, a value for this object should be set before the row is made active. | ||||
| Chh3cNTPPeerRemPort | 1.3.6.1.4.1.25506.8.22.2.1.1.1.5 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The UDP port number on which the peer receives NTP messages. | ||||
| Chh3cNTPPeerLocAdr | 1.3.6.1.4.1.25506.8.22.2.1.1.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current The IP address of the local host. Multi-homing can be supported using this object. | ||||
| Chh3cNTPPeerLocPort | 1.3.6.1.4.1.25506.8.22.2.1.1.1.7 | Integer32 (1..65535) | RO | |
column · Integer32 (1..65535) · read-only · current The UDP port number on which the local host receives NTP messages. | ||||
| Chh3cNTPPeerLeap | 1.3.6.1.4.1.25506.8.22.2.1.1.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current This is a two-bit code warning of an impending leap second to be inserted in the NTP timescale. The bits are set before 23:59 on the day of insertion and reset after 00:00 on the following day. This causes the number of seconds (rollover interval) in the day of insertion to be increased or decreased by one. The two bits are coded as below, 00, no warning 01, last minute has 61 seconds 10, last minute has 59 seconds 11, alarm condition (clock not synchronized)
| ||||
| Chh3cNTPPeerHMode | 1.3.6.1.4.1.25506.8.22.2.1.1.1.9 | INTEGER | NA | |
column · INTEGER · not-accessible · current This is an integer indicating the association mode,
with values coded as follows,
0, unspecified
1, symmetric active - A host operating in this mode
sends periodic messages regardless of the
reach ability state or stratum of its peer. By
operating in this mode the host announces its
willingness to synchronize and be synchronized
by the peer
2, symmetric passive - This type of association is
ordinarily created upon arrival of a message
from a peer operating in the symmetric active
mode and persists only as long as the peer is
reachable and operating at a stratum level
less than or equal to the host; otherwise, the
association is dissolved. However, the
association will always persist until at least
one message has been sent in reply. By
operating in this mode the host announces its
willingness to synchronize and be synchronized
by the peer
3, client - A host operating in this mode sends
periodic messages regardless of the
reach ability state or stratum of its peer. By
operating in this mode the host, usually a LAN
workstation, announces its willingness to be
synchronized by, but not to synchronize the peer
4, server - This type of association is ordinarily
created upon arrival of a client request message
and exists only in order to reply to that
request, after which the association is
dissolved. By operating in this mode the host,
usually a LAN time server, announces its
willingness to synchronize, but not to be
synchronized by the peer
5, broadcast - A host operating in this mode sends
periodic messages regardless of the
reach ability state or stratum of the peers.
By operating in this mode the host, usually a
LAN time server operating on a high-speed
broadcast medium, announces its willingness to
synchronize all of the peers, but not to be
synchronized by any of them
6, reserved for NTP control messages
7, reserved for private use
8, broadcastclient
9, multicastclient
| ||||
| Chh3cNTPPeerStratum | 1.3.6.1.4.1.25506.8.22.2.1.1.1.10 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current This is a integer indicating the stratum level of the peer clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-255, secondary reference (via NTP) | ||||
| Chh3cNTPPeerPPoll | 1.3.6.1.4.1.25506.8.22.2.1.1.1.11 | Integer32 (-20..20) | RO | |
column · Integer32 (-20..20) · read-only · current The interval at which the peer polls the local host. | ||||
| Chh3cNTPPeerHPoll | 1.3.6.1.4.1.25506.8.22.2.1.1.1.12 | Integer32 (-20..20) | RO | |
column · Integer32 (-20..20) · read-only · current The interval at which the local host polls the peer. | ||||
| Chh3cNTPPeerPrecision | 1.3.6.1.4.1.25506.8.22.2.1.1.1.13 | Integer32 (-20..20) | RO | |
column · Integer32 (-20..20) · read-only · current This is a signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms). | ||||
| Chh3cNTPPeerRootDelay | 1.3.6.1.4.1.25506.8.22.2.1.1.1.14 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew. | ||||
| Chh3cNTPPeerRootDispersion | 1.3.6.1.4.1.25506.8.22.2.1.1.1.15 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is a signed fixed-point number indicating the maximum error of the peer clock relative to the primary reference source at the root of the synchronization subnet, in milliseconds. Only positive values greater than zero are possible. | ||||
| Chh3cNTPPeerRefId | 1.3.6.1.4.1.25506.8.22.2.1.1.1.16 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current The reference identifier of the peer. This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string. Stratum, Code, Meaning 0, DCN, DCN routing protocol 0, TSP, TSP time protocol 1, ATOM, Atomic clock (calibrated) 1, WWVB, WWVB LF (band 5) radio 1, GOES, GOES UHF (band 9) satellite 1, WWV, WWV HF (band 7) radio | ||||
| Chh3cNTPPeerRefTime | 1.3.6.1.4.1.25506.8.22.2.1.1.1.17 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is the local time at the peer, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is zero. | ||||
| Chh3cNTPPeerOrg | 1.3.6.1.4.1.25506.8.22.2.1.1.1.18 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is the local time, in timestamp format, at the peer when it's latest NTP message was sent. If the peer becomes unreachable the value is set to zero | ||||
| Chh3cNTPPeerRec | 1.3.6.1.4.1.25506.8.22.2.1.1.1.19 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is the local time, in timestamp format, when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero. | ||||
| Chh3cNTPPeerXmt | 1.3.6.1.4.1.25506.8.22.2.1.1.1.20 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is the local time, in timestamp format, at which the NTP message departed the sender. | ||||
| Chh3cNTPPeerReach | 1.3.6.1.4.1.25506.8.22.2.1.1.1.21 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This is a shift register of NTP.WINDOW bits used to determine the reach ability status of the peer, with bits entering from the least significant (rightmost) end. A peer is considered reachable if at least one bit in this register is set to one | ||||
| Chh3cNTPPeerValid | 1.3.6.1.4.1.25506.8.22.2.1.1.1.22 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current This is an integer counter indicating the valid samples remaining in the filter register. It is used to determine the reach ability state and when the poll interval should be increased or decreased. | ||||
| Chh3cNTPPeerTimer | 1.3.6.1.4.1.25506.8.22.2.1.1.1.23 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current This is an integer counter used to control the interval of transmitted NTP messages from the local host to the peer. | ||||
| Chh3cNTPPeerDelay | 1.3.6.1.4.1.25506.8.22.2.1.1.1.24 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is a signed fixed-point number indicating the roundtrip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew-error accumulation. | ||||
| Chh3cNTPPeerOffset | 1.3.6.1.4.1.25506.8.22.2.1.1.1.25 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is a signed, fixed-point number indicating the offset of the peer clock relative to the local clock, in milliseconds. | ||||
| Chh3cNTPPeerJitter | 1.3.6.1.4.1.25506.8.22.2.1.1.1.26 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is an indicating that peer of sample Variance | ||||
| Chh3cNTPPeerDispersion | 1.3.6.1.4.1.25506.8.22.2.1.1.1.27 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current This is a signed fixed-point number indicating the maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are possible. | ||||
| Chh3cNTPPeerKeyId | 1.3.6.1.4.1.25506.8.22.2.1.1.1.28 | Unsigned32 (0..4294967295) | RO | |
column · Unsigned32 (0..4294967295) · read-only · current This is an unsigned integer identifying the cryptographic key used to generate the message-authentication code. | ||||
| Chh3cNTPPeerFiltDelay | 1.3.6.1.4.1.25506.8.22.2.1.1.1.29 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current Round-trip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. This variable can take on both positive and negative values, depending on clock precision and skew-error accumulation. | ||||
| Chh3cNTPPeerFiltOffset | 1.3.6.1.4.1.25506.8.22.2.1.1.1.30 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current The offset of the peer clock relative to the local clock in milliseconds. | ||||
| Chh3cNTPPeerFiltError | 1.3.6.1.4.1.25506.8.22.2.1.1.1.31 | OCTET STRING (SIZE (1..128)) | RO | |
column · OCTET STRING (SIZE (1..128)) · read-only · current The maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are possible. | ||||
| Chh3cNTPPeerPMode | 1.3.6.1.4.1.25506.8.22.2.1.1.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current This is an integer indicating the association mode,
with values coded as follows,
0, unspecified
1, symmetric active - A host operating in this mode
sends periodic messages regardless of the
reach ability state or stratum of its peer. By
operating in this mode the host announces its
willingness to synchronize and be synchronized
by the peer
2, symmetric passive - This type of association is
ordinarily created upon arrival of a message
from a peer operating in the symmetric active
mode and persists only as long as the peer is
reachable and operating at a stratum level
less than or equal to the host; otherwise, the
association is dissolved. However, the
association will always persist until at least
one message has been sent in reply. By
operating in this mode the host announces its
willingness to synchronize and be synchronized
by the peer
3, client - A host operating in this mode sends
periodic messages regardless of the
reach ability state or stratum of its peer. By
operating in this mode the host, usually a LAN
workstation, announces its willingness to be
synchronized by, but not to synchronize the peer
4, server - This type of association is ordinarily
created upon arrival of a client request message
and exists only in order to reply to that
request, after which the association is
dissolved. By operating in this mode the host,
usually a LAN time server, announces its
willingness to synchronize, but not to be
synchronized by the peer
5, broadcast - A host operating in this mode sends
periodic messages regardless of the
reach ability state or stratum of the peers.
By operating in this mode the host, usually a
LAN time server operating on a high-speed
broadcast medium, announces its willingness to
synchronize all of the peers, but not to be
synchronized by any of them
6, reserved for NTP control messages
7, reserved for private use
8, broadcastclient
9, multicastclient
When creating a new peer association, if no value
is specified for this object, it defaults to
'symmetricActive'.
| ||||
| Chh3cNTPPeerReceived | 1.3.6.1.4.1.25506.8.22.2.1.1.1.33 | Counter32 | RO | |
column · Counter32 · read-only · current The number of received messages. | ||||
| Chh3cNTPPeerSent | 1.3.6.1.4.1.25506.8.22.2.1.1.1.34 | Counter32 | RO | |
column · Counter32 · read-only · current The number of send messages. | ||||
| Chh3cNTPPeerFlash | 1.3.6.1.4.1.25506.8.22.2.1.1.1.35 | Bits | RO | |
column · Bits · read-only · current The information about the message.
| ||||
| Chh3cNTPPeerRowStatus | 1.3.6.1.4.1.25506.8.22.2.1.1.1.36 | RowStatus | RC | |
column · RowStatus · read-create · current The status object for this row. When a management station is creating a new row, it should set the value for cntpPeersPeerAddress at least, before the row can be made 'active'. | ||||
Traps / Notifications
- hh3cNTPDynSessionLimit
1.3.6.1.4.1.25506.8.22.1.2.0.3 - hh3cNTPDynSessionLimitResume
1.3.6.1.4.1.25506.8.22.1.2.0.4 - hh3cNTPServerAbnormal
1.3.6.1.4.1.25506.8.22.1.2.0.15 - hh3cNTPServerNormal
1.3.6.1.4.1.25506.8.22.1.2.0.16 - hh3cNTPSessionLimit
1.3.6.1.4.1.25506.8.22.1.2.0.5 - hh3cNTPSessionLimitResume
1.3.6.1.4.1.25506.8.22.1.2.0.6 - hh3cNTPStepSetTimeFailed
1.3.6.1.4.1.25506.8.22.1.2.0.17 - hh3cNTPSynchronizationLost
1.3.6.1.4.1.25506.8.22.1.2.0.7 - hh3cNTPSynchronizationResume
1.3.6.1.4.1.25506.8.22.1.2.0.8 - hh3cNTPSysLeapChangeTrap
1.3.6.1.4.1.25506.8.22.1.2.0.14 - hh3cNTPSysPeerChangeTrap
1.3.6.1.4.1.25506.8.22.1.2.0.2 - hh3cNTPSysStateChangeTrap
1.3.6.1.4.1.25506.8.22.1.2.0.1 - hh3cNTPSysStratumChange
1.3.6.1.4.1.25506.8.22.1.2.0.9 - hh3cNTPTimeOffsetLimit
1.3.6.1.4.1.25506.8.22.1.2.0.12 - hh3cNTPTimeOffsetLimitResume
1.3.6.1.4.1.25506.8.22.1.2.0.13 - hh3cNTPTimeOffsetThresExceed
1.3.6.1.4.1.25506.8.22.1.2.0.10 - hh3cNTPTimeOffsetThresResume
1.3.6.1.4.1.25506.8.22.1.2.0.11