HH3C-NQA-MIB
H3CThe private MIB file includes the test information of the device. It is supplementary for rfc2925.txt.
snmptranslate -m HH3C-NQA-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-NQA-MIB <host> 1.3.6.1.4.1.25506.8.3Imports
| DISMAN-PING-MIB | pingCtlDescr, pingCtlEntry, pingCtlOwnerIndex, pingCtlTargetAddress, pingCtlTargetAddressType, pingCtlTestName, pingCtlType |
|---|---|
| HH3C-OID-MIB | hh3cRhw |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cNqa | 1.3.6.1.4.1.25506.8.3 | |||
identity The private MIB file includes the test information of the device. It is supplementary for rfc2925.txt. | ||||
| Nhh3cNqaObjects | 1.3.6.1.4.1.25506.8.3.1 | |||
| Shh3cNqaMIBVersion | 1.3.6.1.4.1.25506.8.3.1.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB' | ||||
| Thh3cNqaCtlTable | 1.3.6.1.4.1.25506.8.3.1.2 | NA | ||
table · not-accessible · current Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. | ||||
| Rhh3cNqaCtlEntry | 1.3.6.1.4.1.25506.8.3.1.2.1 | NA | ||
row · not-accessible · current Defines an entry in the hh3cNqaCtlTable. The operation of this table is same as that of pingResultsTable.
| ||||
| Chh3cNqaCtlTargetPort | 1.3.6.1.4.1.25506.8.3.1.2.1.1 | Integer32 (0..65536) | RC | |
column · Integer32 (0..65536) · read-create · current The destination port that may be used by udpEcho, tcpConnect and jitter probes. | ||||
| Chh3cNqaCtlSourcePort | 1.3.6.1.4.1.25506.8.3.1.2.1.2 | Integer32 (0..65536) | RC | |
column · Integer32 (0..65536) · read-create · current The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port. | ||||
| Chh3cNqaCtlTTL | 1.3.6.1.4.1.25506.8.3.1.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe. | ||||
| Chh3cNqaCtlJitterAdminInterval | 1.3.6.1.4.1.25506.8.3.1.2.1.4 | Integer32 (0..60000) | RC | |
column · Integer32 (0..60000) · read-create · current Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test.
| ||||
| Chh3cNqaCtlJitterAdminNumPackets | 1.3.6.1.4.1.25506.8.3.1.2.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Packet number that specifies how many packets will be sent in one jitter test. This object is only used by jitter test. | ||||
| Chh3cNqaCtlHttpOperationType | 1.3.6.1.4.1.25506.8.3.1.2.1.6 | INTEGER | RC | |
column · INTEGER · read-create · current Http operation type: get, post or raw.
| ||||
| Chh3cNqaCtlHttpOperationString | 1.3.6.1.4.1.25506.8.3.1.2.1.7 | DisplayString (SIZE (0..1023)) | RC | |
column · DisplayString (SIZE (0..1023)) · read-create · current Http operation string. For example, if the http operation type is get, the string will be url, home page and http version. | ||||
| Chh3cNqaCtlFtpOperationType | 1.3.6.1.4.1.25506.8.3.1.2.1.8 | INTEGER | RC | |
column · INTEGER · read-create · current Ftp operation type.
| ||||
| Chh3cNqaCtlFtpUsername | 1.3.6.1.4.1.25506.8.3.1.2.1.9 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current Ftp username. | ||||
| Chh3cNqaCtlFtpPassword | 1.3.6.1.4.1.25506.8.3.1.2.1.10 | DisplayString (SIZE (0..32)) | RC | |
column · DisplayString (SIZE (0..32)) · read-create · current Ftp password. | ||||
| Chh3cNqaCtlFtpOperationString | 1.3.6.1.4.1.25506.8.3.1.2.1.11 | DisplayString (SIZE (0..255)) | RC | |
column · DisplayString (SIZE (0..255)) · read-create · current Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server. | ||||
| Chh3cNqaCtlVPNInstance | 1.3.6.1.4.1.25506.8.3.1.2.1.12 | DisplayString (SIZE (0..255)) | RC | |
column · DisplayString (SIZE (0..255)) · read-create · current VPN name by which system finds route in the specified VPN to send NQA probe packets. | ||||
| Chh3cNqaCtlHistoryKeptTime | 1.3.6.1.4.1.25506.8.3.1.2.1.13 | Integer32 (1..1440) | RC | |
column · Integer32 (1..1440) · read-create · current To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped.
| ||||
| Chh3cNqaCtlHistoryEnable | 1.3.6.1.4.1.25506.8.3.1.2.1.14 | INTEGER | RC | |
column · INTEGER · read-create · current To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded.
| ||||
| Chh3cNqaCtlICPIFAdvFactor | 1.3.6.1.4.1.25506.8.3.1.2.1.15 | Integer32 | RC | |
column · Integer32 · read-create · current The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning Impairment Factor) values. This is applicable only for the jitter probe. Suggestion values: |-----------------------------------|-------| | Service |factor | |-----------------------------------|-------| |conventional wire-line | 0 | |-----------------------------------|-------| |mobility within Building | 5 | |-----------------------------------|-------| |mobility within geographical area | 10 | |-----------------------------------|-------| |access to hard-to-reach location | 20 | |-----------------------------------|-------| | ||||
| Chh3cNqaCtlCodecType | 1.3.6.1.4.1.25506.8.3.1.2.1.16 | INTEGER | RC | |
column · INTEGER · read-create · current To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe.
| ||||
| Thh3cNqaResultsTable | 1.3.6.1.4.1.25506.8.3.1.3 | NA | ||
table · not-accessible · current Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in the hh3cNqaResultsTable. The operation of this table is same as that of pingResultsTable. | ||||
| Rhh3cNqaResultsEntry | 1.3.6.1.4.1.25506.8.3.1.3.1 | NA | ||
row · not-accessible · current The operation of this table is same as that of pingResultsTable. | ||||
| Chh3cNqaResultsRttNumDisconnects | 1.3.6.1.4.1.25506.8.3.1.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. | ||||
| Chh3cNqaResultsRttTimeouts | 1.3.6.1.4.1.25506.8.3.1.3.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times that a NQA probe failed because the probe timed out. | ||||
| Chh3cNqaResultsRttBusies | 1.3.6.1.4.1.25506.8.3.1.3.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The next test will not start until the next Frequency. | ||||
| Chh3cNqaResultsRttNoConnections | 1.3.6.1.4.1.25506.8.3.1.3.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. | ||||
| Chh3cNqaResultsRttDrops | 1.3.6.1.4.1.25506.8.3.1.3.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources. | ||||
| Chh3cNqaResultsRttSequenceErrors | 1.3.6.1.4.1.25506.8.3.1.3.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of packets arrived out of sequence. | ||||
| Chh3cNqaResultsRttStatsErrors | 1.3.6.1.4.1.25506.8.3.1.3.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of some other errors. | ||||
| Chh3cNqaResultsMaxDelaySD | 1.3.6.1.4.1.25506.8.3.1.3.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if destination system time is not valid, the SD delay may be set 0.
| ||||
| Chh3cNqaResultsMaxDelayDS | 1.3.6.1.4.1.25506.8.3.1.3.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitter test, if destination system time is not valid, the DS delay may be set 0.
| ||||
| Chh3cNqaResultsLostPacketRatio | 1.3.6.1.4.1.25506.8.3.1.3.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets. | ||||
| Chh3cNqaResultsPacketLateArrival | 1.3.6.1.4.1.25506.8.3.1.3.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The value of this object indicates the number of the packets that arrived after the timeout. | ||||
| Chh3cNqaResultsRttSum | 1.3.6.1.4.1.25506.8.3.1.3.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The sum of round trip time. | ||||
| Chh3cNqaResultsNumOfDelaySD | 1.3.6.1.4.1.25506.8.3.1.3.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of delay from source to destination that are successfully measured. | ||||
| Chh3cNqaResultsMinDelaySD | 1.3.6.1.4.1.25506.8.3.1.3.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The minimum of all one way times from source to destination. | ||||
| Chh3cNqaResultsSumDelaySD | 1.3.6.1.4.1.25506.8.3.1.3.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The sum of one way times from source to destination. | ||||
| Chh3cNqaResultsSum2DelaySD | 1.3.6.1.4.1.25506.8.3.1.3.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The sum of squares of one way times from source to destination. | ||||
| Chh3cNqaResultsNumOfDelayDS | 1.3.6.1.4.1.25506.8.3.1.3.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of delay from destination to source that are successfully measured. | ||||
| Chh3cNqaResultsMinDelayDS | 1.3.6.1.4.1.25506.8.3.1.3.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The minimum of all one way times from destination to source. | ||||
| Chh3cNqaResultsSumDelayDS | 1.3.6.1.4.1.25506.8.3.1.3.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The sum of one way times from destination to source. | ||||
| Chh3cNqaResultsSum2DelayDS | 1.3.6.1.4.1.25506.8.3.1.3.1.20 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The sum of squares of one way times from destination to source. | ||||
| Thh3cNqaJitterStatsTable | 1.3.6.1.4.1.25506.8.3.1.4 | NA | ||
table · not-accessible · current Statistics table for latest jitter activity. | ||||
| Rhh3cNqaJitterStatsEntry | 1.3.6.1.4.1.25506.8.3.1.4.1 | NA | ||
row · not-accessible · current An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hh3cNqajitter. | ||||
| Chh3cNqaJitterStatsNumOfRTT | 1.3.6.1.4.1.25506.8.3.1.4.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current The number of received destination device responses with which jitter test can reach round-trip time. | ||||
| Chh3cNqaJitterStatsMinOfPositivesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal positive jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsMaxOfPositivesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal positive jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsNumOfPositivesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets sent from source to destination. | ||||
| Chh3cNqaJitterStatsSumOfPositivesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of positive jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsSum2PositivesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsMinOfNegativesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsMaxOfNegativesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsNumOfNegativesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.9 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent from source to destination. | ||||
| Chh3cNqaJitterStatsSumOfNegativesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.10 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative jitters in packets sent from source to destination.
| ||||
| Chh3cNqaJitterStatsSum2NegativesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaJitterStatsMinOfPositivesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal positive jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsMaxOfPositivesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal positive jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsNumOfPositivesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.14 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number that records positive jitter times from destination to source in the jitter test. | ||||
| Chh3cNqaJitterStatsSumOfPositivesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.15 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of positive jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsSum2PositivesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.16 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of square of positive jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsMinOfNegativesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsMaxOfNegativesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsNumOfNegativesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number that records negative jitter times from destination to source in the jitter test. | ||||
| Chh3cNqaJitterStatsSumOfNegativesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.20 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of negative jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsSum2NegativesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaJitterStatsPacketLossSD | 1.3.6.1.4.1.25506.8.3.1.4.1.22 | Gauge32 | RO | |
column · Gauge32 · read-only · current The lost packets number sent from source to destination. | ||||
| Chh3cNqaJitterStatsPacketLossDS | 1.3.6.1.4.1.25506.8.3.1.4.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current The lost packets number sent from destination to source. | ||||
| Chh3cNqaJitterStatsAvePositivesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.24 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average positive jitter value from source to destination.
| ||||
| Chh3cNqaJitterStatsAveNegativesSD | 1.3.6.1.4.1.25506.8.3.1.4.1.25 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average negative jitter value from source to destination.
| ||||
| Chh3cNqaJitterStatsAvePositivesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.26 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average positive jitter value from destination to source.
| ||||
| Chh3cNqaJitterStatsAveNegativesDS | 1.3.6.1.4.1.25506.8.3.1.4.1.27 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average negative jitter value from destination to source.
| ||||
| Chh3cNqaJitterStatsPktLossUnknown | 1.3.6.1.4.1.25506.8.3.1.4.1.28 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of packets which is lost with unknown reason. | ||||
| Chh3cNqaJitterStatsOperOfICPIF | 1.3.6.1.4.1.25506.8.3.1.4.1.29 | Gauge32 | RO | |
column · Gauge32 · read-only · current The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. | ||||
| Chh3cNqaJitterStatsOperOfMOS | 1.3.6.1.4.1.25506.8.3.1.4.1.30 | Gauge32 | RO | |
column · Gauge32 · read-only · current The MOS (Mean Opinion Score) value for the latest jitter test. | ||||
| Chh3cNqaJitterStatsAveSD | 1.3.6.1.4.1.25506.8.3.1.4.1.31 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average jitter value from source to destination.
| ||||
| Chh3cNqaJitterStatsAveDS | 1.3.6.1.4.1.25506.8.3.1.4.1.32 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average jitter value from destination to source.
| ||||
| Chh3cNqaJitterStatsLostPacketPermillage | 1.3.6.1.4.1.25506.8.3.1.4.1.33 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object reflects the drop rate of NQA test packet. For example, if the value is 100, that means source device only had received 900 packets per thousand. | ||||
| Shh3cNqaAgentEnable | 1.3.6.1.4.1.25506.8.3.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable NQA agent function.
| ||||
| Thh3cNqaTcpServerTable | 1.3.6.1.4.1.25506.8.3.1.6 | NA | ||
table · not-accessible · current A table which contains the status of NQA tcp server configuration information. | ||||
| Rhh3cNqaTcpServerEntry | 1.3.6.1.4.1.25506.8.3.1.6.1 | NA | ||
row · not-accessible · current A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server port. | ||||
| Chh3cNqaTcpServerIpAddress | 1.3.6.1.4.1.25506.8.3.1.6.1.1 | InetAddress | NA | |
column · InetAddress · not-accessible · current Tcp server's ip address. | ||||
| Chh3cNqaTcpServerPort | 1.3.6.1.4.1.25506.8.3.1.6.1.2 | Integer32 (0..65536) | NA | |
column · Integer32 (0..65536) · not-accessible · current Tcp server's port number. | ||||
| Chh3cNqaTcpServerRowStatus | 1.3.6.1.4.1.25506.8.3.1.6.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current hh3cNqaTcpServerIpAddress and hh3cNqaTcpServerPort must be set during a creation operation. | ||||
| Thh3cNqaUdpServerTable | 1.3.6.1.4.1.25506.8.3.1.7 | NA | ||
table · not-accessible · current Status of NQA udp server configuration information. | ||||
| Rhh3cNqaUdpServerEntry | 1.3.6.1.4.1.25506.8.3.1.7.1 | NA | ||
row · not-accessible · current This entry includes not only the udp server ip address but also the udp server udp port. | ||||
| Chh3cNqaUdpServerIpAddress | 1.3.6.1.4.1.25506.8.3.1.7.1.1 | InetAddress | NA | |
column · InetAddress · not-accessible · current Udp server's ip address. | ||||
| Chh3cNqaUdpServerPort | 1.3.6.1.4.1.25506.8.3.1.7.1.2 | Integer32 (0..65536) | NA | |
column · Integer32 (0..65536) · not-accessible · current Udp server's port number. | ||||
| Chh3cNqaUdpServerRowStatus | 1.3.6.1.4.1.25506.8.3.1.7.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current hh3cNqaUdpServerIpAddress and hh3cNqaUdpServerPort must be set during a creation operation. | ||||
| Shh3cNqaServerEnable | 1.3.6.1.4.1.25506.8.3.1.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable NQA server function.
| ||||
| Shh3cNqaStatsMaxGroupNumber | 1.3.6.1.4.1.25506.8.3.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum number saved per group. The maximum value of hh3cNqaCtlStatisticsGroupNumber can not exceed the value of this object. | ||||
| Thh3cNqaStatisticsCtlTable | 1.3.6.1.4.1.25506.8.3.1.10 | NA | ||
table · not-accessible · current Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations are stored in the hh3cNqaStatisticsResultsTable and the hh3cNqaGroupStatsJitterTable. | ||||
| Rhh3cNqaStatisticsCtlEntry | 1.3.6.1.4.1.25506.8.3.1.10.1 | NA | ||
row · not-accessible · current Defines an entry in the hh3cNqaStatisticsCtlTable. The hh3cNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hh3cNqaStatisticsCtlTable to correspond to the pingCtlEntry.
| ||||
| Chh3cNqaCtlStatisticsInterval | 1.3.6.1.4.1.25506.8.3.1.10.1.1 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Statistic information will be calculated after the time that is the value of hh3cNqaCtlStatisticsInterval.
| ||||
| Chh3cNqaCtlStatisticsGroupNumber | 1.3.6.1.4.1.25506.8.3.1.10.1.2 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The value of this object indicates the number of group saved. The length of this object is from 1 to hh3cNqaStatsMaxGroupNumber. | ||||
| Chh3cNqaCtlStatisticsKeptTime | 1.3.6.1.4.1.25506.8.3.1.10.1.3 | Unsigned32 (1..1440) | RC | |
column · Unsigned32 (1..1440) · read-create · current To indicate how long the statistic information will be saved after the test stops.
| ||||
| Chh3cNqaCtlBeginTime | 1.3.6.1.4.1.25506.8.3.1.10.1.4 | DateAndTime | RC | |
column · DateAndTime · read-create · current Time at which the type-specified test will start. | ||||
| Chh3cNqaCtlLifeTime | 1.3.6.1.4.1.25506.8.3.1.10.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current To indicate how long the type-specified test will last.
| ||||
| Thh3cNqaStatisticsResultsTable | 1.3.6.1.4.1.25506.8.3.1.11 | NA | ||
table · not-accessible · current Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations in a statistic cycle are stored in the hh3cNqaStatisticsResultsTable. The statistic cycle is the value of hh3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that the probe statistics result (Hh3cNqaStatisticsResultsEntry) belongs to. | ||||
| Rhh3cNqaStatisticsResultsEntry | 1.3.6.1.4.1.25506.8.3.1.11.1 | NA | ||
row · not-accessible · current Defines an entry in the hh3cNqaStatisticsResultsTable. The hh3cNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hh3cNqaStatisticsResultsEntry to correspond to the pingCtlEntry that caused it to be created. | ||||
| Chh3cNqaStatResIndex | 1.3.6.1.4.1.25506.8.3.1.11.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current An entry in this table is created when the statistics
result of a NQA probe is determined.
An implementation MUST start assigning
hh3cNqaStatResIndex values at 1 and wrap after
exceeding the maximum possible value as defined by
the limit of this object ('ffffffff'h). | ||||
| Chh3cNqaStatResIpTargetAddressType | 1.3.6.1.4.1.25506.8.3.1.11.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current This object indicates the type of address stored in the corresponding hh3cNqaStatResIpTargetAddress object. | ||||
| Chh3cNqaStatResIpTargetAddress | 1.3.6.1.4.1.25506.8.3.1.11.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current This object represent the host address to be used at a remote host for performing a network analysis operation. | ||||
| Chh3cNqaStatResMinRtt | 1.3.6.1.4.1.25506.8.3.1.11.1.4 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
| ||||
| Chh3cNqaStatResMaxRtt | 1.3.6.1.4.1.25506.8.3.1.11.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
| ||||
| Chh3cNqaStatResAverageRtt | 1.3.6.1.4.1.25506.8.3.1.11.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The average NQA probe round-trip-time (RTT).
| ||||
| Chh3cNqaStatResProbeResponses | 1.3.6.1.4.1.25506.8.3.1.11.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received. | ||||
| Chh3cNqaStatResSentProbes | 1.3.6.1.4.1.25506.8.3.1.11.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent.
| ||||
| Chh3cNqaStatResRttSumOfSquares | 1.3.6.1.4.1.25506.8.3.1.11.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been received.
| ||||
| Chh3cNqaStatResStartTime | 1.3.6.1.4.1.25506.8.3.1.11.1.10 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object contains the start time of the statistic. | ||||
| Chh3cNqaStatResInterval | 1.3.6.1.4.1.25506.8.3.1.11.1.11 | Gauge32 | RO | |
column · Gauge32 · read-only · current This object contains the interval between two times of statistic.
| ||||
| Chh3cNqaStatResRttNumDisconnects | 1.3.6.1.4.1.25506.8.3.1.11.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. | ||||
| Chh3cNqaStatResRttTimeouts | 1.3.6.1.4.1.25506.8.3.1.11.1.13 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that a probe failed because the probe timed out. | ||||
| Chh3cNqaStatResRttBusies | 1.3.6.1.4.1.25506.8.3.1.11.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that a NQA probe failed because errors related to sockets. | ||||
| Chh3cNqaStatResRttNoConnections | 1.3.6.1.4.1.25506.8.3.1.11.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. | ||||
| Chh3cNqaStatResRttDrops | 1.3.6.1.4.1.25506.8.3.1.11.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources. | ||||
| Chh3cNqaStatResRttSequenceErrors | 1.3.6.1.4.1.25506.8.3.1.11.1.17 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets arrived out of sequence. | ||||
| Chh3cNqaStatResRttErrors | 1.3.6.1.4.1.25506.8.3.1.11.1.18 | Counter32 | RO | |
column · Counter32 · read-only · current The number of other errors. | ||||
| Chh3cNqaStatResLostPacketRatio | 1.3.6.1.4.1.25506.8.3.1.11.1.19 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent packets of total sent packets. | ||||
| Chh3cNqaStatResPacketLateArrival | 1.3.6.1.4.1.25506.8.3.1.11.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The value of this object reflects the number of the packets that arrived after the timeout. | ||||
| Chh3cNqaStatResRttSum | 1.3.6.1.4.1.25506.8.3.1.11.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current This object contains the sum for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA responses have been received. | ||||
| Chh3cNqaStatResNumOfDelaySD | 1.3.6.1.4.1.25506.8.3.1.11.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The number of one way times from source to destination that are successfully measured. | ||||
| Chh3cNqaStatResMinDelaySD | 1.3.6.1.4.1.25506.8.3.1.11.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum one way times from source to destination. | ||||
| Chh3cNqaStatResMaxDelaySD | 1.3.6.1.4.1.25506.8.3.1.11.1.24 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum one way times from source to destination. | ||||
| Chh3cNqaStatResSumDelaySD | 1.3.6.1.4.1.25506.8.3.1.11.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The sum of one way times from source to destination. | ||||
| Chh3cNqaStatResSum2DelaySD | 1.3.6.1.4.1.25506.8.3.1.11.1.26 | Counter32 | RO | |
column · Counter32 · read-only · current The sum of squares of one way times from source to destination. | ||||
| Chh3cNqaStatResNumOfDelayDS | 1.3.6.1.4.1.25506.8.3.1.11.1.27 | Counter32 | RO | |
column · Counter32 · read-only · current The number of one way times from destination to source that are successfully measured. | ||||
| Chh3cNqaStatResMinDelayDS | 1.3.6.1.4.1.25506.8.3.1.11.1.28 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum one way times from destination to source. | ||||
| Chh3cNqaStatResMaxDelayDS | 1.3.6.1.4.1.25506.8.3.1.11.1.29 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum one way times from destination to source. | ||||
| Chh3cNqaStatResSumDelayDS | 1.3.6.1.4.1.25506.8.3.1.11.1.30 | Counter32 | RO | |
column · Counter32 · read-only · current The sum of one way times from destination to source. | ||||
| Chh3cNqaStatResSum2DelayDS | 1.3.6.1.4.1.25506.8.3.1.11.1.31 | Counter32 | RO | |
column · Counter32 · read-only · current The sum of squares of one way times from destination to source. | ||||
| Chh3cNqaStatResLostPacketPermillage | 1.3.6.1.4.1.25506.8.3.1.11.1.32 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of this object reflects the drop rate of NQA test packet. For example, if the value is 100, that means source device only had received 900 packets per thousand. | ||||
| Thh3cNqaGroupStatsJitterTable | 1.3.6.1.4.1.25506.8.3.1.12 | NA | ||
table · not-accessible · current Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hh3cNqaCtlStatisticsInterval. The first two index identify the pingCtlEntry that a probe statistics result (Hh3cNqaStatisticsResultsEntry) belongs to. | ||||
| Rhh3cNqaGroupStatsJitterEntry | 1.3.6.1.4.1.25506.8.3.1.12.1 | NA | ||
row · not-accessible · current An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hh3cNqajitter. | ||||
| Chh3cNqaStatJitterIndex | 1.3.6.1.4.1.25506.8.3.1.12.1.1 | Unsigned32 (1..4294967295) | NA | |
column · Unsigned32 (1..4294967295) · not-accessible · current An entry in this table is created when the statistic
result of a NQA probe in a statistic cycle is determined.
An implementation MUST start assigning hh3cNqaStatJitterIndex
values at 1 and wrap after exceeding the maximum possible
value as defined by the limit of this object ('ffffffff'h). | ||||
| Chh3cNqaStatJitterMinOfPosSD | 1.3.6.1.4.1.25506.8.3.1.12.1.2 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal positive jitter value from source to destination in jitter test.
| ||||
| Chh3cNqaStatJitterMaxOfPosSD | 1.3.6.1.4.1.25506.8.3.1.12.1.3 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal positive jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterNumOfPosSD | 1.3.6.1.4.1.25506.8.3.1.12.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of positive jitters from source to destination in the jitter test. | ||||
| Chh3cNqaStatJitterSumOfPosSD | 1.3.6.1.4.1.25506.8.3.1.12.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of positive jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterSumOfSquarePosSD | 1.3.6.1.4.1.25506.8.3.1.12.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of square of positive jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterMinOfNegSD | 1.3.6.1.4.1.25506.8.3.1.12.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterMaxOfNegSD | 1.3.6.1.4.1.25506.8.3.1.12.1.8 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterNumOfNegSD | 1.3.6.1.4.1.25506.8.3.1.12.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of negative jitters from source to destination in the jitter test. | ||||
| Chh3cNqaStatJitterSumOfNegSD | 1.3.6.1.4.1.25506.8.3.1.12.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of negative jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterSumOfSquareNegSD | 1.3.6.1.4.1.25506.8.3.1.12.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of square of negative jitter values from source to destination in the jitter test.
| ||||
| Chh3cNqaStatJitterMinOfPosDS | 1.3.6.1.4.1.25506.8.3.1.12.1.12 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal positive jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterMaxOfPosDS | 1.3.6.1.4.1.25506.8.3.1.12.1.13 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal positive jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterNumOfPosDS | 1.3.6.1.4.1.25506.8.3.1.12.1.14 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of positive jitters from destination to source in the jitter test. | ||||
| Chh3cNqaStatJitterSumOfPosDS | 1.3.6.1.4.1.25506.8.3.1.12.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of positive jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterSumOfSquarePosDS | 1.3.6.1.4.1.25506.8.3.1.12.1.16 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of square of positive jitter values destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterMinOfNegDS | 1.3.6.1.4.1.25506.8.3.1.12.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterMaxOfNegDS | 1.3.6.1.4.1.25506.8.3.1.12.1.18 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterNumOfNegDS | 1.3.6.1.4.1.25506.8.3.1.12.1.19 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of negative jitters from destination to source in the jitter test. | ||||
| Chh3cNqaStatJitterSumOfNegDS | 1.3.6.1.4.1.25506.8.3.1.12.1.20 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of negative jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterSumOfSquareNegDS | 1.3.6.1.4.1.25506.8.3.1.12.1.21 | Counter32 | RO | |
column · Counter32 · read-only · current The value of time that records the sum of square of negative jitter values from destination to source in the jitter test.
| ||||
| Chh3cNqaStatJitterPacketLossSD | 1.3.6.1.4.1.25506.8.3.1.12.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The lost packets number sent from source to destination. | ||||
| Chh3cNqaStatJitterPacketLossDS | 1.3.6.1.4.1.25506.8.3.1.12.1.23 | Counter32 | RO | |
column · Counter32 · read-only · current The lost packets number sent from destination to source. | ||||
| Chh3cNqaStatJitterAvePosSD | 1.3.6.1.4.1.25506.8.3.1.12.1.24 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average positive jitter value from source to destination.
| ||||
| Chh3cNqaStatJitterAveNegSD | 1.3.6.1.4.1.25506.8.3.1.12.1.25 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average negative jitter value from source to destination.
| ||||
| Chh3cNqaStatJitterAvePosDS | 1.3.6.1.4.1.25506.8.3.1.12.1.26 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average positive jitter value from destination to source.
| ||||
| Chh3cNqaStatJitterAveNegDS | 1.3.6.1.4.1.25506.8.3.1.12.1.27 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average negative jitter value from destination to source.
| ||||
| Chh3cNqaStatJitterPktLossUnknown | 1.3.6.1.4.1.25506.8.3.1.12.1.28 | Counter32 | RO | |
column · Counter32 · read-only · current The number of packets which is lost with unknown reason. | ||||
| Chh3cNqaStatJitterMaxOfICPIF | 1.3.6.1.4.1.25506.8.3.1.12.1.29 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum of all ICPIF values in a statistic cycle for jitter test. | ||||
| Chh3cNqaStatJitterMinOfICPIF | 1.3.6.1.4.1.25506.8.3.1.12.1.30 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum of all ICPIF values in a statistic cycle for jitter test. | ||||
| Chh3cNqaStatJitterMaxOfMOS | 1.3.6.1.4.1.25506.8.3.1.12.1.31 | Gauge32 | RO | |
column · Gauge32 · read-only · current The maximum of all MOS values in a statistic cycle for jitter test. | ||||
| Chh3cNqaStatJitterMinOfMOS | 1.3.6.1.4.1.25506.8.3.1.12.1.32 | Gauge32 | RO | |
column · Gauge32 · read-only · current The minimum of all MOS values in a statistic cycle for jitter test. | ||||
| Chh3cNqaStatJitterAveSD | 1.3.6.1.4.1.25506.8.3.1.12.1.33 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average jitter value from source to destination.
| ||||
| Chh3cNqaStatJitterAveDS | 1.3.6.1.4.1.25506.8.3.1.12.1.34 | Gauge32 | RO | |
column · Gauge32 · read-only · current The value of time that records the average jitter value from destination to source.
| ||||
| Thh3cNqaReactionTable | 1.3.6.1.4.1.25506.8.3.1.13 | NA | ||
table · not-accessible · current A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. When PingCtlType of the test is hh3cNqaTwampLight, it does not support the table. | ||||
| Rhh3cNqaReactionEntry | 1.3.6.1.4.1.25506.8.3.1.13.1 | NA | ||
row · not-accessible · current Defines an entry in the hh3cNqaReactionTable. The first two index elements identify the pingCtlEntry that a hh3cNqaReactItemIndex belongs to. The third index element selects a single reaction. | ||||
| Chh3cNqaReactOwnerIndex | 1.3.6.1.4.1.25506.8.3.1.13.1.1 | SnmpAdminString (SIZE (0..32)) | AN | |
column · SnmpAdminString (SIZE (0..32)) · accessible-for-notify · current The first index of hh3cNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hh3cNqaReactOwnerIndex and hh3cNqaReactTestName identify an existed test. | ||||
| Chh3cNqaReactTestName | 1.3.6.1.4.1.25506.8.3.1.13.1.2 | SnmpAdminString (SIZE (0..32)) | AN | |
column · SnmpAdminString (SIZE (0..32)) · accessible-for-notify · current The second index of hh3cNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hh3cNqaReactOwnerIndex and hh3cNqaReactTestName identify an existed test. | ||||
| Chh3cNqaReactItemIndex | 1.3.6.1.4.1.25506.8.3.1.13.1.3 | Unsigned32 (1..10) | AN | |
column · Unsigned32 (1..10) · accessible-for-notify · current The third index of hh3cNqaReactionTable, it definitely identifies one of the reaction configurations for a test. | ||||
| Chh3cNqaReactCheckedElement | 1.3.6.1.4.1.25506.8.3.1.13.1.4 | INTEGER | RC | |
column · INTEGER · read-create · current A list of reaction condition type.
'probetime' and 'probefailure' are valid when pingCtlType of
the test is not hh3cNqajitter.
'jitterOwdSD': one way delay from source to destination in
jitter test.
'jitterOwdDS': one way delay from destination to source in
jitter test.
'jitterrtt', 'jitterpacketloss', 'jittersd', 'jitterds',
'jitterOwdSD' and 'jitterOwdDS' are valid when pingCtlType
of the test is hh3cNqajitter.
'icpif' and 'mos' are valid when pingCtlType of the test is
hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'.
| ||||
| Chh3cNqaReactThresholdUpperLimit | 1.3.6.1.4.1.25506.8.3.1.13.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object defines an administrative upper-threshold value for hh3cNqaReactCheckedElement. The value of this object is zero if hh3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'. | ||||
| Chh3cNqaReactThresholdLowerLimit | 1.3.6.1.4.1.25506.8.3.1.13.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object defines an administrative lower-threshold value for hh3cNqaReactCheckedElement. The value of hh3cNqaReactThresholdLowerLimit should be equal or less than the value of hh3cNqaReactThresholdUpperLimit. The value of this object is zero if hh3cNqaReactCheckedElement is specified as 'jitterpacketloss' and 'probefailure'. | ||||
| Chh3cNqaReactThresholdType | 1.3.6.1.4.1.25506.8.3.1.13.1.7 | INTEGER | RC | |
column · INTEGER · read-create · current This object defines the reaction threshold types.
invalid(0): Invalid value.
average(1): If reaction threshold type is average and the average
value of watched operation exceeds threshold limit,
an action specified in hh3cNqaReactActionType is
generated when hh3cNqaReactCurrentStatus changes.
consecutive(2): If reaction threshold type is consecutive and
the times of watched operation consecutively exceeds
the limit specified by hh3cNqaReactThresholdConsecNum,
an action specified in hh3cNqaReactActionType is
generated when hh3cNqaReactCurrentStatus changes.
accumulative(3): If reaction threshold type is accumulative and
the times of watched operation accumulatively exceeds
the limit specified by hh3cNqaReactThresholdAccumNum,
an action specified in hh3cNqaReactActionType is
generated when hh3cNqaReactCurrentStatus changes.
If reaction threshold type is not configured, the value of this
object is 'invalid'.
| ||||
| Chh3cNqaReactThresholdConsecNum | 1.3.6.1.4.1.25506.8.3.1.13.1.8 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object defines a consecutive threshold limit. The value is zero when hh3cNqaReactThresholdType is not 'consecutive'. | ||||
| Chh3cNqaReactThresholdAccumNum | 1.3.6.1.4.1.25506.8.3.1.13.1.9 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object defines an accumulative threshold limit. The value is zero when the hh3cNqaReactThresholdType is not 'accumulative'. | ||||
| Chh3cNqaReactActionType | 1.3.6.1.4.1.25506.8.3.1.13.1.10 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the type of reaction to generate if the specified
violation type occurs for the monitored element:
none - No reaction is generated
trapOnly - A trap is generated
triggerOnly - All trigger actions defined for this
entry are generated
trapAndTrigger - Both a trap and all trigger actions
are generated
| ||||
| Chh3cNqaReactCurrentStatus | 1.3.6.1.4.1.25506.8.3.1.13.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the current status of this reaction entry:
invalid - The status of the reaction entry is unknown.
overThreshold - The status of the reaction entry is overThreshold
when the monitored result exceeds the threshold
value for the hh3cNqaReactThresholdType.
belowThreshold - The status of the reaction entry is belowThreshold
when the monitored result is under the threshold
value for the hh3cNqaReactThresholdType.
overUpperThreshold - The status of the reaction entry is overThreshold
when the monitored result is exceeds the
upper-threshold value for the
hh3cNqaReactThresholdType.
belowLowerThreshold - The status of the reaction entry is belowThreshold
when the monitored result is under the
lower-threshold value for
hh3cNqaReactThresholdType.
| ||||
| Chh3cNqaReactRowStatus | 1.3.6.1.4.1.25506.8.3.1.13.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current This object allows entries to be created and deleted in the hh3cNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurations which take effect immediately. Deletion of an entry in this table results in corresponding reaction configurations are being deleted and stop taking effect. | ||||
| Chh3cNqaReactCheckedNum | 1.3.6.1.4.1.25506.8.3.1.13.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of checked element samples that are monitored. | ||||
| Chh3cNqaReactThresholdNum | 1.3.6.1.4.1.25506.8.3.1.13.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of checked element samples that are over threshold. | ||||
| Thh3cNqaStatisticsReactionTable | 1.3.6.1.4.1.25506.8.3.1.14 | NA | ||
table · not-accessible · current A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is deleted. | ||||
| Rhh3cNqaStatisticsReactionEntry | 1.3.6.1.4.1.25506.8.3.1.14.1 | NA | ||
row · not-accessible · current Defines an entry in the hh3cNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hh3cNqaReactItemIndex belongs to. The third index element identifies an entry in the hh3cNqaStatisticsResultsTable. The forth index element selects a single reaction. | ||||
| Chh3cNqaStatReactOwnerIndex | 1.3.6.1.4.1.25506.8.3.1.14.1.1 | SnmpAdminString (SIZE (0..32)) | NA | |
column · SnmpAdminString (SIZE (0..32)) · not-accessible · current The first index of hh3cNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. | ||||
| Chh3cNqaStatReactTestName | 1.3.6.1.4.1.25506.8.3.1.14.1.2 | SnmpAdminString (SIZE (0..32)) | NA | |
column · SnmpAdminString (SIZE (0..32)) · not-accessible · current The second index of hh3cNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. | ||||
| Chh3cNqaStatReactIndex | 1.3.6.1.4.1.25506.8.3.1.14.1.3 | Unsigned32 (1..10) | NA | |
column · Unsigned32 (1..10) · not-accessible · current The third index of hh3cNqaStatisticsReactionTable. An entry in
this table is created when the statistics result of a NQA probe
is determined.
An implementation MUST start assigning hh3cNqaStatResIndex values
at 1 and wrap after exceeding the maximum possible value as
defined by the limit of this object ('ffffffff'h). | ||||
| Chh3cNqaStatReactItemIndex | 1.3.6.1.4.1.25506.8.3.1.14.1.4 | Unsigned32 (0..4294967295) | NA | |
column · Unsigned32 (0..4294967295) · not-accessible · current The forth index of hh3cNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test | ||||
| Chh3cNqaStatReactCheckedNum | 1.3.6.1.4.1.25506.8.3.1.14.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The number of checked element samples that are monitored. | ||||
| Chh3cNqaStatReactThresholdNum | 1.3.6.1.4.1.25506.8.3.1.14.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current The number of checked element samples that are over threshold. | ||||
| Thh3cNqaTcpServerExtendTable | 1.3.6.1.4.1.25506.8.3.1.15 | NA | ||
table · not-accessible · current A table which contains the status of extended NQA TCP server configuration information. | ||||
| Rhh3cNqaTcpServerExtendEntry | 1.3.6.1.4.1.25506.8.3.1.15.1 | NA | ||
row · not-accessible · current A table which contains the status of extended NQA TCP server configuration information. This entry includes the TCP server IP address, port, VPN name and DSField. | ||||
| Chh3cNqaTcpServerExtIpAddress | 1.3.6.1.4.1.25506.8.3.1.15.1.1 | InetAddress | NA | |
column · InetAddress · not-accessible · current TCP server's IP address. | ||||
| Chh3cNqaTcpServerExtPort | 1.3.6.1.4.1.25506.8.3.1.15.1.2 | Integer32 (0..65536) | NA | |
column · Integer32 (0..65536) · not-accessible · current TCP server's port number. | ||||
| Chh3cNqaTcpServerExtVPNType | 1.3.6.1.4.1.25506.8.3.1.15.1.3 | VpnInstanceType | NA | |
column · VpnInstanceType · not-accessible · current TCP server's VPN instance type. | ||||
| Chh3cNqaTcpServerExtVPNInstance | 1.3.6.1.4.1.25506.8.3.1.15.1.4 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current TCP server's VPN name.If the NQA server listens on the public network, the value of hh3cNqaTcpServerExtVPNType must be public(1) and the value of this object can be set to any non-printable character string.If the NQA server listens on the private network, the value of hh3cNqaTcpServerExtVPNType must be vpn(2) and the value of this object can be set to any non-printable character string. | ||||
| Chh3cNqaTcpServerExtDSField | 1.3.6.1.4.1.25506.8.3.1.15.1.5 | Unsigned32 (0..256) | RC | |
column · Unsigned32 (0..256) · read-create · current Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class octet in a IPv6 header. The value of this object must be a decimal integer in the range of 0 to 255. Not all values are legal or meaningful. A value of 0 means that the function represented by this option is not supported. The value of 256 indicates that TOS is not configured, and this value is not supported by IP implementations. DS Field usage is often not supported by IP implementations and not all values are supported. Refer to RFC 2474 for guidance on usage of this field. | ||||
| Chh3cNqaTcpServerExtRowStatus | 1.3.6.1.4.1.25506.8.3.1.15.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current hh3cNqaTcpServerIpAddress, hh3cNqaTcpServerPort, hh3cNqaTcpServerExtVPNType and hh3cNqaTcpServerVPNInstance must be set during a creation operation. | ||||
| Thh3cNqaUdpServerExtendTable | 1.3.6.1.4.1.25506.8.3.1.16 | NA | ||
table · not-accessible · current Status of extended NQA UDP server configuration information. | ||||
| Rhh3cNqaUdpServerExtendEntry | 1.3.6.1.4.1.25506.8.3.1.16.1 | NA | ||
row · not-accessible · current A table which contains the status of extended NQA UDP server configuration information. This entry includes the UDP server IP address, port, VPN name and DSField. | ||||
| Chh3cNqaUdpServerExtIpAddress | 1.3.6.1.4.1.25506.8.3.1.16.1.1 | InetAddress | NA | |
column · InetAddress · not-accessible · current UDP server's IP address. | ||||
| Chh3cNqaUdpServerExtPort | 1.3.6.1.4.1.25506.8.3.1.16.1.2 | Integer32 (0..65536) | NA | |
column · Integer32 (0..65536) · not-accessible · current UDP server's port number. | ||||
| Chh3cNqaUdpServerExtVPNType | 1.3.6.1.4.1.25506.8.3.1.16.1.3 | VpnInstanceType | NA | |
column · VpnInstanceType · not-accessible · current UDP server's VPN instance type. | ||||
| Chh3cNqaUdpServerExtVPNInstance | 1.3.6.1.4.1.25506.8.3.1.16.1.4 | OCTET STRING (SIZE (0..31)) | NA | |
column · OCTET STRING (SIZE (0..31)) · not-accessible · current UDP server's VPN name.If the NQA server listens on the public network, the value of hh3cNqaUdpServerExtVPNType must be public(1) and the value of this object can be set to any non-printable character string.If the NQA server listens on the private network, the value of hh3cNqaUdpServerExtVPNType must be vpn(2) and the value of this object can be set to any non-printable character string. | ||||
| Chh3cNqaUdpServerExtDSField | 1.3.6.1.4.1.25506.8.3.1.16.1.5 | Unsigned32 (0..256) | RC | |
column · Unsigned32 (0..256) · read-create · current Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class octet in a IPv6 header. The value of this object must be a decimal integer in the range of 0 to 255. Not all values are legal or meaningful. A value of 0 means that the function represented by this option is not supported. The value of 256 indicates that TOS is not configured, and this value is not supported by IP implementations. DS Field usage is often not supported by IP implementations and not all values are supported. Refer to RFC 2474 for guidance on usage of this field. | ||||
| Chh3cNqaUdpServerExtRowStatus | 1.3.6.1.4.1.25506.8.3.1.16.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current hh3cNqaUdpServerIpAddress, hh3cNqaUdpServerPort, hh3cNqaUdpServerExtVPNType and hh3cNqaUdpServerVPNInstance must be set during a creation operation. | ||||
| Nhh3cNqaImplementationTypeDomains | 1.3.6.1.4.1.25506.8.3.2 | |||
| Nhh3cNqaUdpEcho | 1.3.6.1.4.1.25506.8.3.2.1 | |||
node · current Indicates that an implementation is using the UDP based echo server. Notes: The hh3cNqaCtlTargetPort and hh3cNqaCtlSourcePort need to be set, while in the pingUdpEcho Node, hh3cNqaCtlTargetPort must be set to the default value. | ||||
| Nhh3cNqaTcpconnect | 1.3.6.1.4.1.25506.8.3.2.2 | |||
node · current Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hh3cNqaCtlTargetPort and hh3cNqaCtlSourcePort need to be set, while in the pingTcpConnectionAttempt Node, hh3cNqaCtlTargetPort must be set to the default value. | ||||
| Nhh3cNqajitter | 1.3.6.1.4.1.25506.8.3.2.3 | |||
node · current Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance analysis. | ||||
| Nhh3cNqaHttp | 1.3.6.1.4.1.25506.8.3.2.4 | |||
node · current Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL. | ||||
| Nhh3cNqadlsw | 1.3.6.1.4.1.25506.8.3.2.5 | |||
node · current Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the response time of a DLSw peer. | ||||
| Nhh3cNqadhcp | 1.3.6.1.4.1.25506.8.3.2.6 | |||
node · current Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown operation. | ||||
| Nhh3cNqaftp | 1.3.6.1.4.1.25506.8.3.2.7 | |||
node · current Indicates that an implementation is using tcp packet for ftp connect and data transfer. | ||||
| Nhh3cNqaTwampLight | 1.3.6.1.4.1.25506.8.3.2.8 | |||
node · current Indicates that a measurement for two-way network quality through UDP packets. The type only supports sending traps. | ||||
| Nhh3cNqaArp | 1.3.6.1.4.1.25506.8.3.2.9 | |||
node · current Indicates that an implementation is using the Address Resolution Protocol (ARP) test facility. The type only supports IPv4 network. | ||||
| Nhh3cNqaHttp2 | 1.3.6.1.4.1.25506.8.3.2.10 | |||
node · current Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP2 data download from a particular HTTP Server. It causes the NQA application to perform a download of the object specified in the URL. | ||||
| Nhh3cNqaNotifications | 1.3.6.1.4.1.25506.8.3.3 | |||
| !hh3cNqaProbeTimeOverThreshold | 1.3.6.1.4.1.25506.8.3.3.1 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. Probe time(equals to RTT for some type of tests) is not in
the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdAccumNum.
3. The probe time is consecutively in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdConsecNum.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | ||||
| !hh3cNqaJitterRTTOverThreshold | 1.3.6.1.4.1.25506.8.3.3.2 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average NQA round-trip-time (RTT) of jitter packets
is not in the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
2. The RTT of jitter packets is accumulatively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times specified
in hh3cNqaReactThresholdAccumNum in one test.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter or hh3cNqaTwampLight. | ||||
| !hh3cNqaProbeFailure | 1.3.6.1.4.1.25506.8.3.3.3 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the probe test accumulatively failed for a
number of times specified in hh3cNqaReactThresholdAccumNum in one
test while the value of hh3cNqaReactThresholdType is 'accumulative'.
2. When the probe test consecutively failed for
a number of times specified in hh3cNqaReactThresholdConsecNum in one
test while the value of hh3cNqaReactThresholdType is 'consecutive'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | ||||
| !hh3cNqaJitterPacketLoss | 1.3.6.1.4.1.25506.8.3.3.4 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the jitter packets accumulatively lost for a
number of times specified in hh3cNqaReactThresholdAccumNum in one
test while the value of hh3cNqaReactThresholdType is 'accumulative'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter or hh3cNqaTwampLight. | ||||
| !hh3cNqaJitterSDOverThreshold | 1.3.6.1.4.1.25506.8.3.3.5 | |||
notification · current The SD means the jitter values from source to destination.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of SD in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit and the
hh3cNqaReactThresholdType is specified as 'average' type.
2. The average of SD in one jitter test is accumulatively
not in the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times specified
in hh3cNqaReactThresholdAccumNum and the
hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter. | ||||
| !hh3cNqaJitterDSOverThreshold | 1.3.6.1.4.1.25506.8.3.3.6 | |||
notification · current The DS means the jitter values from destination to source.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of DS in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit and the
hh3cNqaReactThresholdType is specified as 'average' type.
2. The average of DS in one jitter test is accumulatively not
in the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times specified
in hh3cNqaReactThresholdAccumNum and the
hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter. | ||||
| !hh3cNqaICPIFOverThreshold | 1.3.6.1.4.1.25506.8.3.3.7 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the ICPIF value in one jitter test is not in
the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'. | ||||
| !hh3cNqaMOSOverThreshold | 1.3.6.1.4.1.25506.8.3.3.8 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. When the MOS value in one jitter test is not in
the range hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger', pingCtlType of the test
is hh3cNqajitter and hh3cNqaCtlCodecType is 'g711Alaw' or 'g711Ulaw'
or 'g729A'. | ||||
| !hh3cNqaJitterOverThreshold | 1.3.6.1.4.1.25506.8.3.3.9 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is above threshold
or below threshold.
1. The average jitter value is not in the range of
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit and the
hh3cNqaReactThresholdType is specified as 'average' type.
2. The total number of times that the average jitter value is not
in the range of hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit reaches or exceeds
the value specified in hh3cNqaReactThresholdAccumNum and the
hh3cNqaReactThresholdType is specified as 'accumulative' type.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is hh3cNqajitter or hh3cNqaTwampLight. | ||||
| !hh3cNqaProbeTimeAboveThreshold | 1.3.6.1.4.1.25506.8.3.3.10 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'overThreshold', 'invalid' or 'overUpperThreshold'.
The change may occur when the monitored condition exceeds the
threshold (or upper threshold) or When NQA operation is stopped.
The above threshold situations are specified as below.
1. Probe time is not in the range hh3cNqaReactThresholdLowerLimit
through hh3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdAccumNum.
3. The probe time is consecutively not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdConsecNum.
4. When NQA operation is stopped.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | ||||
| !hh3cNqaProbeTimeBelowThreshold | 1.3.6.1.4.1.25506.8.3.3.11 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'belowThreshold' or 'belowLowerThreshold' from a
threshold-crossing state.
The below threshold situations are specified as below.
1. Probe time is in the range hh3cNqaReactThresholdLowerLimit
through hh3cNqaReactThresholdUpperLimit.
2. The probe time is accumulatively in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdAccumNum.
3. The probe time is consecutively in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit for a number of times
specified in hh3cNqaReactThresholdConsecNum.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | ||||
| !hh3cNqaProbeFailAboveThreshold | 1.3.6.1.4.1.25506.8.3.3.12 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'overThreshold', 'invalid' or 'overUpperThreshold'.
The change may occur when the monitored condition exceeds the
threshold (or upper threshold) or When NQA operation is stopped.
The threshold-crossing situations are specified as below.
1. When the number of accumulative failed probes reaches the specified
value in hh3cNqaReactThresholdAccumNum in one test while the value
of hh3cNqaReactThresholdType is 'accumulative'.
2. When the number of consecutive failed probes reaches the specified
value in hh3cNqaReactThresholdConsecNum in one test while the value
of hh3cNqaReactThresholdType is 'consecutive'.
3. When NQA operation is stopped.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | ||||
| !hh3cNqaProbeFailBelowThreshold | 1.3.6.1.4.1.25506.8.3.3.13 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus
changes to 'belowThreshold' or 'belowLowerThreshold' from a
threshold-crossing state.
The below threshold situations are specified as below.
1. When the number of accumulative successful probes reaches the specified
value in hh3cNqaReactThresholdAccumNum in one test while the value
of hh3cNqaReactThresholdType is 'accumulative'.
2. When the number of consecutive successful probes reaches the specified
value in hh3cNqaReactThresholdConsecNum in one test while the value
of hh3cNqaReactThresholdType is 'consecutive'.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' or 'trapAndTrigger' and pingCtlType of the test
is not hh3cNqajitter. | ||||
| !hh3cNqaJitterOwdSDNotification | 1.3.6.1.4.1.25506.8.3.3.14 | |||
notification · current The SD means the delay values from source to destination.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of SD in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' and pingCtlType of the test is hh3cNqajitter. | ||||
| !hh3cNqaJitterOwdDSNotification | 1.3.6.1.4.1.25506.8.3.3.15 | |||
notification · current The DS means the delay values from destination to source.
It is generated when the value of hh3cNqaReactCurrentStatus
changes.
The change may occur when the watched condition is over threshold
or below threshold.
The over threshold situations is specified as below.
1. The average of DS in one jitter test is not in the range
hh3cNqaReactThresholdLowerLimit through
hh3cNqaReactThresholdUpperLimit.
This notification is valid only when hh3cNqaReactActionType
is 'trapOnly' and pingCtlType of the test is hh3cNqajitter. | ||||
| !hh3cNqaTestFailure | 1.3.6.1.4.1.25506.8.3.3.16 | |||
notification · current It is generated when the value of hh3cNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold. The over threshold situations is specified as below. 1. When the test consecutively failed for a number of times specified in hh3cNqaReactThresholdConsecNum while the value of hh3cNqaReactThresholdType is 'consecutive'. This notification is valid only when hh3cNqaReactActionType is 'trapOnly'. | ||||
| !hh3cNqaTestResultChange | 1.3.6.1.4.1.25506.8.3.3.17 | |||
notification · current It is generated when the test result changed. This notification is valid only when hh3cNqaReactActionType is 'trapOnly'and pingCtlType of the test is pingIcmpEcho. | ||||
| Nhh3cNqaNotificationsV2 | 1.3.6.1.4.1.25506.8.3.4 | |||
| Nhh3cNqaNotification | 1.3.6.1.4.1.25506.8.3.4.0 | |||
| !hh3cNqaScheduleFailure | 1.3.6.1.4.1.25506.8.3.4.0.1 | |||
notification · current It is generated upon failure to start the scheduled NQA operation.
| ||||
| !hh3cNqaServerFailure | 1.3.6.1.4.1.25506.8.3.4.0.2 | |||
notification · current It is generated upon failure to enable the NQA server. | ||||
| Nhh3cNqaNotificationObjects | 1.3.6.1.4.1.25506.8.3.4.1 | |||
| Shh3cNqaOwnerIndex | 1.3.6.1.4.1.25506.8.3.4.1.1 | SnmpAdminString (SIZE (0..32)) | AN | |
scalar · SnmpAdminString (SIZE (0..32)) · accessible-for-notify · current The owner of the test. hh3cNqaOwnerIndex and hh3cNqaTestName identify an existing test. | ||||
| Shh3cNqaTestName | 1.3.6.1.4.1.25506.8.3.4.1.2 | SnmpAdminString (SIZE (0..32)) | AN | |
scalar · SnmpAdminString (SIZE (0..32)) · accessible-for-notify · current The name of the test.hh3cNqaOwnerIndex and hh3cNqaTestName identify an existing test. | ||||
Textual conventions
VpnInstanceTypeINTEGERpublic(1)vpn(2)A value that represents a type of VPN instance. public(1) Public network. vpn(2) Private network.
Traps / Notifications
- hh3cNqaICPIFOverThreshold
1.3.6.1.4.1.25506.8.3.3.7 - hh3cNqaJitterDSOverThreshold
1.3.6.1.4.1.25506.8.3.3.6 - hh3cNqaJitterOverThreshold
1.3.6.1.4.1.25506.8.3.3.9 - hh3cNqaJitterOwdDSNotification
1.3.6.1.4.1.25506.8.3.3.15 - hh3cNqaJitterOwdSDNotification
1.3.6.1.4.1.25506.8.3.3.14 - hh3cNqaJitterPacketLoss
1.3.6.1.4.1.25506.8.3.3.4 - hh3cNqaJitterRTTOverThreshold
1.3.6.1.4.1.25506.8.3.3.2 - hh3cNqaJitterSDOverThreshold
1.3.6.1.4.1.25506.8.3.3.5 - hh3cNqaMOSOverThreshold
1.3.6.1.4.1.25506.8.3.3.8 - hh3cNqaProbeFailAboveThreshold
1.3.6.1.4.1.25506.8.3.3.12 - hh3cNqaProbeFailBelowThreshold
1.3.6.1.4.1.25506.8.3.3.13 - hh3cNqaProbeFailure
1.3.6.1.4.1.25506.8.3.3.3 - hh3cNqaProbeTimeAboveThreshold
1.3.6.1.4.1.25506.8.3.3.10 - hh3cNqaProbeTimeBelowThreshold
1.3.6.1.4.1.25506.8.3.3.11 - hh3cNqaProbeTimeOverThreshold
1.3.6.1.4.1.25506.8.3.3.1 - hh3cNqaScheduleFailure
1.3.6.1.4.1.25506.8.3.4.0.1 - hh3cNqaServerFailure
1.3.6.1.4.1.25506.8.3.4.0.2 - hh3cNqaTestFailure
1.3.6.1.4.1.25506.8.3.3.16 - hh3cNqaTestResultChange
1.3.6.1.4.1.25506.8.3.3.17