HH3C-LPBKDT-MIB
H3CLoops may cause broadcast storms. The purpose of loopback detection is to detect loops on the device and to protect the network.
snmptranslate -m HH3C-LPBKDT-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-LPBKDT-MIB <host> 1.3.6.1.4.1.25506.2.95Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | InterfaceIndex, ifDescr, ifIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cLpbkdt | 1.3.6.1.4.1.25506.2.95 | |||
identity Loops may cause broadcast storms. The purpose of loopback detection is to detect loops on the device and to protect the network. | ||||
| Nhh3cLpbkdtNotifications | 1.3.6.1.4.1.25506.2.95.1 | |||
| Nhh3cLpbkdtTrapPrefix | 1.3.6.1.4.1.25506.2.95.1.0 | |||
| !hh3cLpbkdtTrapLoopbacked | 1.3.6.1.4.1.25506.2.95.1.0.1 | |||
| !hh3cLpbkdtTrapRecovered | 1.3.6.1.4.1.25506.2.95.1.0.2 | |||
| !hh3cLpbkdtTrapPerVlanLoopbacked | 1.3.6.1.4.1.25506.2.95.1.0.3 | |||
notification · current Trap message is generated when the interface is looped in the VLAN.
| ||||
| !hh3cLpbkdtTrapPerVlanRecovered | 1.3.6.1.4.1.25506.2.95.1.0.4 | |||
notification · current Trap message is generated when the loop on the interface is eliminated in the VLAN.
| ||||
| !hh3cLpbkdtTrapVsiLoopbacked | 1.3.6.1.4.1.25506.2.95.1.0.5 | |||
notification · current This trap message is generated when an interface is looped in a VSI. | ||||
| !hh3cLpbkdtTrapVsiRecovered | 1.3.6.1.4.1.25506.2.95.1.0.6 | |||
notification · current This trap message is generated when the loops on a VSI are eliminated.
| ||||
| !hh3cLpbkdtTrapActionLOG | 1.3.6.1.4.1.25506.2.95.1.0.7 | |||
| !hh3cLpbkdtTrapActionLOGClear | 1.3.6.1.4.1.25506.2.95.1.0.8 | |||
| !hh3cLpbkdtTrapActionBlock | 1.3.6.1.4.1.25506.2.95.1.0.9 | |||
| !hh3cLpbkdtTrapActionBlockClear | 1.3.6.1.4.1.25506.2.95.1.0.10 | |||
| !hh3cLpbkdtTrapActionDown | 1.3.6.1.4.1.25506.2.95.1.0.11 | |||
| !hh3cLpbkdtTrapActionDownClear | 1.3.6.1.4.1.25506.2.95.1.0.12 | |||
| Nhh3cLpbkdtTrapOjbects | 1.3.6.1.4.1.25506.2.95.1.1 | |||
| Shh3cLpbkdtVsiName | 1.3.6.1.4.1.25506.2.95.1.1.1 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current VSI name. | ||||
| Shh3cLpbkdtSVlanID | 1.3.6.1.4.1.25506.2.95.1.1.2 | VlanId | AN | |
scalar · VlanId · accessible-for-notify · current Outer VLAN ID. | ||||
| Shh3cLpbkdtCVlanID | 1.3.6.1.4.1.25506.2.95.1.1.3 | VlanId | AN | |
scalar · VlanId · accessible-for-notify · current Inner VLAN ID. | ||||
| Shh3cLpbkdtACName | 1.3.6.1.4.1.25506.2.95.1.1.4 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current Ethernet service instance name. | ||||
| Nhh3cLpbkdtObjects | 1.3.6.1.4.1.25506.2.95.2 | |||
| Shh3cLpbkdtVlanID | 1.3.6.1.4.1.25506.2.95.2.1 | VlanId | AN | |
scalar · VlanId · accessible-for-notify · current The ID of VLAN. | ||||
| Shh3cLpbkdtVlanEnable | 1.3.6.1.4.1.25506.2.95.2.2 | OCTET STRING (SIZE (512)) | RW | |
scalar · OCTET STRING (SIZE (512)) · read-write · current Whether the loop detection is enabled globally for the VLANs. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each VLAN is represented by a single bit within the value of this object. A bit with a value of '1' indicates that the loop detection is enabled globally for the VLAN; the loop detection is disabled globally for the VLAN if its bit has a value of '0'. The 4095th and 4096th bits must be have a value of '0'. | ||||
| Shh3cLpbkdtAction | 1.3.6.1.4.1.25506.2.95.2.3 | Hh3cLpbkdtActionType | RW | |
scalar · Hh3cLpbkdtActionType · read-write · current Global loopback detection action on the port on which a loop is detected. The global action applies to all ports. The per-port action takes precedence over the global action. | ||||
| Shh3cLpbkdtIntervalTime | 1.3.6.1.4.1.25506.2.95.2.4 | Integer32 (1..300) | RW | |
scalar · Integer32 (1..300) · read-write · current The interval at which loop detection frames are transmitted. | ||||
| Thh3cLpbkdtPortTable | 1.3.6.1.4.1.25506.2.95.2.5 | NA | ||
table · not-accessible · current A table containing information about the loop detection configurations and status for individual ports. | ||||
| Rhh3cLpbkdtPortEntry | 1.3.6.1.4.1.25506.2.95.2.5.1 | NA | ||
| Chh3cLpbkdtPortIfIndex | 1.3.6.1.4.1.25506.2.95.2.5.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The ifIndex of the port. | ||||
| Chh3cLpbkdtPortVlanEnable | 1.3.6.1.4.1.25506.2.95.2.5.1.2 | OCTET STRING (SIZE (512)) | RW | |
column · OCTET STRING (SIZE (512)) · read-write · current Whether the loop detection is enabled on the port for the VLANs. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each VLAN is represented by a single bit within the value of this object. A bit with a value of '1' indicates that the loop detection is enabled on the port for the VLAN; the loop detection is disabled on the port for the VLAN if its bit has a value of '0'. The 4095th and 4096th bits must be have a value of '0'. | ||||
| Chh3cLpbkdtPortAction | 1.3.6.1.4.1.25506.2.95.2.5.1.3 | Hh3cLpbkdtActionType | RW | |
column · Hh3cLpbkdtActionType · read-write · current Loopback detection action on the port on which a loop is detected. The per-port action takes precedence over the global action. | ||||
| Chh3cLpbkdtPortLoopbacked | 1.3.6.1.4.1.25506.2.95.2.5.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Whether the port is looped. | ||||
Textual conventions
Hh3cLpbkdtActionTypeINTEGERblock(2)nolearning(3)none(1)shutdown(4)Loopback detection action on the port on which a loop is detected. When a loop is detected on a port, the device generates a log. The enumeration 'none(1)' means that the device performs no action on the port. The enumeration 'block(2)' means that the device disables MAC address learning and blocks traffic on the port. The enumeration 'nolearning(3)' means that the device disables MAC address learning on the port. The enumeration 'shutdown(4)' means that the device shuts down the port. The device automatically sets the port to the forwarding state after the time interval configured.
Traps / Notifications
- hh3cLpbkdtTrapActionBlock
1.3.6.1.4.1.25506.2.95.1.0.9 - hh3cLpbkdtTrapActionBlockClear
1.3.6.1.4.1.25506.2.95.1.0.10 - hh3cLpbkdtTrapActionDown
1.3.6.1.4.1.25506.2.95.1.0.11 - hh3cLpbkdtTrapActionDownClear
1.3.6.1.4.1.25506.2.95.1.0.12 - hh3cLpbkdtTrapActionLOG
1.3.6.1.4.1.25506.2.95.1.0.7 - hh3cLpbkdtTrapActionLOGClear
1.3.6.1.4.1.25506.2.95.1.0.8 - hh3cLpbkdtTrapLoopbacked
1.3.6.1.4.1.25506.2.95.1.0.1 - hh3cLpbkdtTrapPerVlanLoopbacked
1.3.6.1.4.1.25506.2.95.1.0.3 - hh3cLpbkdtTrapPerVlanRecovered
1.3.6.1.4.1.25506.2.95.1.0.4 - hh3cLpbkdtTrapRecovered
1.3.6.1.4.1.25506.2.95.1.0.2 - hh3cLpbkdtTrapVsiLoopbacked
1.3.6.1.4.1.25506.2.95.1.0.5 - hh3cLpbkdtTrapVsiRecovered
1.3.6.1.4.1.25506.2.95.1.0.6