HH3C-ISSU-MIB
H3CThis MIB provides objects for upgrading images on modules in the
system, objects for showing the result of an upgrade operation,
and objects for showing the result of a test operation.
To perform an upgrade operation, a management application
must first read the hh3cIssuUpgradeImageTable table and use the
information in other tables, as explained below. You can
configure a new image name for each image type as listed in
hh3cIssuUpgradeImageTable. The system will use this image on the
particular module at the next reboot.
The management application used to perform an upgrade
operation must first check if an upgrade operation is already
in progress in the system. This is done by reading the
hh3cIssuOpType ('none' indicates that
no other upgrade operation is in progress. Any other value
indicates that an upgrade is already in progress and a new upgrade
operation is not allowed. To start an 'install' operation,
the user must first perform a 'test' operation to examine the
version compatibility between the given set of images
and the running images. Only if the result of the 'test'
operation is 'success' can the user proceed to do an install
operation. The table hh3cIssuTestResultTable
provides the result of the 'test' operation performed by using hh3cIssuOpType.
The table hh3cIssuUpgradeResultTable provides the result of the 'install' operation
performed by using hh3cIssuOpType.snmptranslate -m HH3C-ISSU-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-ISSU-MIB <host> 1.3.6.1.4.1.25506.2.133Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cIssuUpgrade | 1.3.6.1.4.1.25506.2.133 | |||
identity This MIB provides objects for upgrading images on modules in the
system, objects for showing the result of an upgrade operation,
and objects for showing the result of a test operation.
To perform an upgrade operation, a management application
must first read the hh3cIssuUpgradeImageTable table and use the
information in other tables, as explained below. You can
configure a new image name for each image type as listed in
hh3cIssuUpgradeImageTable. The system will use this image on the
particular module at the next reboot.
The management application used to perform an upgrade
operation must first check if an upgrade operation is already
in progress in the system. This is done by reading the
hh3cIssuOpType ('none' indicates that
no other upgrade operation is in progress. Any other value
indicates that an upgrade is already in progress and a new upgrade
operation is not allowed. To start an 'install' operation,
the user must first perform a 'test' operation to examine the
version compatibility between the given set of images
and the running images. Only if the result of the 'test'
operation is 'success' can the user proceed to do an install
operation. The table hh3cIssuTestResultTable
provides the result of the 'test' operation performed by using hh3cIssuOpType.
The table hh3cIssuUpgradeResultTable provides the result of the 'install' operation
performed by using hh3cIssuOpType. | ||||
| Nhh3cIssuUpgradeMibObjects | 1.3.6.1.4.1.25506.2.133.1 | |||
| Nhh3cIssuUpgradeGroup | 1.3.6.1.4.1.25506.2.133.1.1 | |||
| Thh3cIssuUpgradeImageTable | 1.3.6.1.4.1.25506.2.133.1.1.1 | NA | ||
table · not-accessible · current A table listing the image variable types that exist in the device. | ||||
| Rhh3cIssuUpgradeImageEntry | 1.3.6.1.4.1.25506.2.133.1.1.1.1 | NA | ||
row · not-accessible · current An hh3cIssuUpgradeImageEntry entry. Each entry provides an image variable type that exists in the device. | ||||
| Chh3cIssuUpgradeImageIndex | 1.3.6.1.4.1.25506.2.133.1.1.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of each image. | ||||
| Chh3cIssuUpgradeImageType | 1.3.6.1.4.1.25506.2.133.1.1.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Types of images that the system can run. The value of
this object has five image variable names:
'boot', 'system', 'feature', 'ipe' and 'patch'. This table will then
list these five strings as follows:
hh3cIssuUpgradeImageType
boot
system
feature
IPE
patch
The user can assign images (using hh3cIssuUpgradeImageURL)
to these variables and the system will use the assigned
images to boot.
| ||||
| Chh3cIssuUpgradeImageURL | 1.3.6.1.4.1.25506.2.133.1.1.1.1.3 | DisplayString (SIZE (1..127)) | RC | |
column · DisplayString (SIZE (1..127)) · read-create · current This object contains the path of the image of this entity. | ||||
| Chh3cIssuUpgradeImageRowStatus | 1.3.6.1.4.1.25506.2.133.1.1.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current Row-status of image table. | ||||
| Nhh3cIssuOp | 1.3.6.1.4.1.25506.2.133.1.1.2 | |||
| Shh3cIssuOpType | 1.3.6.1.4.1.25506.2.133.1.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Command to be executed.
The 'test' command must be performed before the 'install'
command can be executed. The 'install'
command is allowed only if a read of
this object returns 'test' and the value of object
hh3cIssuOpStatus is 'success'.
Command Remarks
none If the user sets this object to 'none', the agent will return a success
without performing an upgrade operation.
done If this object returns any value other than
'none', setting this to 'done' will do
the required cleanup of the previous upgrade
operation and get the system ready for a new
upgrade operation.
test Check the version compatibility and upgrade method
for the given set of image files.
install For all the image entities listed in the
hh3cIssuUpgradeImageTable, perform the required
upgrade operation listed in that table.
rollback Abort the current 'install' operation and roll back
to the previous version.
| ||||
| Shh3cIssuImageFileOverwrite | 1.3.6.1.4.1.25506.2.133.1.1.2.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current If you want to overwrite the existing file, set the value of this object to enable. Otherwise, set the value of this object to disable. | ||||
| Shh3cIssuOpTrapEnable | 1.3.6.1.4.1.25506.2.133.1.1.2.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current If you want to enable the trap, set the value of this object to enable. Otherwise, set the value of this object to disable. | ||||
| Shh3cIssuOpStatus | 1.3.6.1.4.1.25506.2.133.1.1.2.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Status of the specified operation. none - No operation was performed. failure - Specified operation has failed. inProgress - Specified operation is in progress. success - Specified operation completed successfully. rollbackInProgress - Rollback operation is in progress. rollbackSuccess - Rollback operation completed successfully.
| ||||
| Shh3cIssuFailedReason | 1.3.6.1.4.1.25506.2.133.1.1.2.5 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Indicates the the cause of 'failure' state of the object 'hh3cIssuOpStatus'. This object would be a null string if the value of 'hh3cIssuOpStatus' is not 'failure'. | ||||
| Shh3cIssuOpTimeCompleted | 1.3.6.1.4.1.25506.2.133.1.1.2.6 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Indicates the time when the upgrade operation was completed. This object would be a null string if hh3cIssuOpType is 'none'. | ||||
| Shh3cIssuLastOpType | 1.3.6.1.4.1.25506.2.133.1.1.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object indicates the previous hh3cIssuOp value.
It will be updated after a new hh3cIssuOp is set and delivered
to the upgrade process.
Command Remarks
none If the user sets this object to 'none', agent will return a success
without performing an upgrade operation.
done If this object returns any value other than
'none', setting this to 'done' will do
the required cleanup of the previous upgrade
operation and get the system ready for a new
upgrade operation.
test Check the version compatibility and upgrade method
for the given set of image files.
install For all the image entities listed in the
hh3cIssuUpgradeImageTable, perform the required
upgrade operation listed in that table.
rollback Abort the current install operation and roll back
to the previous version.
| ||||
| Shh3cIssuLastOpStatus | 1.3.6.1.4.1.25506.2.133.1.1.2.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object indicates previous hh3cIssuOpStatus value. It will be updated after new hh3cIssuOp is set and delivered to upgrade process. none - No operation was performed. failure - Specified operation has failed. inProgress - Specified operation is active. success - Specified operation completed successfully. rollbackInProgress - Rollback operation is in progress. rollbackSuccess - Rollback operation completed successfully.
| ||||
| Shh3cIssuLastOpFailedReason | 1.3.6.1.4.1.25506.2.133.1.1.2.9 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Indicates the cause of 'failure' state of the object 'hh3cIssuOpStatus'. This object would be a null string if the value of 'hh3cIssuOpStatus' is not 'failure'. The value will be updated when new hh3cIssuOp is set and delivered to the upgrade process. | ||||
| Shh3cIssuLastOpTimeCompleted | 1.3.6.1.4.1.25506.2.133.1.1.2.10 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Indicates the previous hh3cIssuOpTimeCompleted value. The value will be updated when new hh3cIssuOp is set and delivered to the upgrade process. | ||||
| Nhh3cIssuUpgradeResultGroup | 1.3.6.1.4.1.25506.2.133.1.2 | |||
| Nhh3cIssuCompatibleResult | 1.3.6.1.4.1.25506.2.133.1.2.1 | |||
| Shh3cIssuCompatibleResultStatus | 1.3.6.1.4.1.25506.2.133.1.2.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Specifies whether the images provided in
hh3cIssuUpgradeImageTable are compatible with each other as
far as this module is concerned.
none - No operation was performed.
inCompatible - The images provided are compatible
and can be run on this module.
compatible - The images provided are incompatible
and can be run on this module.
failure - Failed to get the compatibility.
| ||||
| Shh3cIssuCompatibleResultFailedReason | 1.3.6.1.4.1.25506.2.133.1.2.1.2 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Indicates the cause of 'failure' state of the object 'hh3cIssuCompatibleResultStatus'. This object would be a null string if the value of 'hh3cIssuCompatibleResultStatus' is not 'failure'. | ||||
| Thh3cIssuTestResultTable | 1.3.6.1.4.1.25506.2.133.1.2.2 | NA | ||
table · not-accessible · current Shows the result of the test operation, from which you can see the upgrade method. | ||||
| Rhh3cIssuTestResultEntry | 1.3.6.1.4.1.25506.2.133.1.2.2.1 | NA | ||
row · not-accessible · current An hh3cIssuTestResultEntry entry. Each entry provides the test result of a card in the device. | ||||
| Chh3cIssuTestResultIndex | 1.3.6.1.4.1.25506.2.133.1.2.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Internal index, not accessible. | ||||
| Chh3cIssuTestDeviceChassisID | 1.3.6.1.4.1.25506.2.133.1.2.2.1.2 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Chassis ID of the card. | ||||
| Chh3cIssuTestDeviceSlotID | 1.3.6.1.4.1.25506.2.133.1.2.2.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Slot ID of the card. | ||||
| Chh3cIssuTestDeviceCpuID | 1.3.6.1.4.1.25506.2.133.1.2.2.1.4 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current CPU ID of the card. | ||||
| Chh3cIssuTestDeviceUpgradeWay | 1.3.6.1.4.1.25506.2.133.1.2.2.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Upgrade method of the device. none - No operation was performed. reboot - The upgrade method of this device is Reboot. sequenceReboot - The upgrade method of this device is SequenceReboot. issuReboot - The upgrade method of this device is IssuReboot. serviceUpgrade - The upgrade method of this device is ServiceReboot. fileUpgrade - The upgrade method of this device is FileReboot. incompatibleUpgrade - The upgrade method of this device is IncompatibleUpgrade.
| ||||
| Thh3cIssuUpgradeResultTable | 1.3.6.1.4.1.25506.2.133.1.2.3 | NA | ||
table · not-accessible · current Shows the result of the install operation. | ||||
| Rhh3cIssuUpgradeResultEntry | 1.3.6.1.4.1.25506.2.133.1.2.3.1 | NA | ||
row · not-accessible · current An hh3cIssuUpgradeResultEntry entry. Each entry provides the upgrade result of a card in the device. | ||||
| Chh3cIssuUpgradeResultIndex | 1.3.6.1.4.1.25506.2.133.1.2.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Internal Index, not accessible. | ||||
| Chh3cIssuUpgradeDeviceChassisID | 1.3.6.1.4.1.25506.2.133.1.2.3.1.2 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Chassis ID of the card. | ||||
| Chh3cIssuUpgradeDeviceSlotID | 1.3.6.1.4.1.25506.2.133.1.2.3.1.3 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Slot ID of the card. | ||||
| Chh3cIssuUpgradeDeviceCpuID | 1.3.6.1.4.1.25506.2.133.1.2.3.1.4 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current CPU ID of the card. | ||||
| Chh3cIssuUpgradeState | 1.3.6.1.4.1.25506.2.133.1.2.3.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Upgrade status of the device. init -The current status of the device is Init. loading -The current status of the device is Loading. loaded -The current status of the device is Loaded. switching -The current status of the device is Switching. switchover -The current status of the device is Switchover. committing -The current status of the device is Committing. committed -The current status of the device is Committed. rollbacking -The current status of the device is Rollbacking. rollbacked -The current status of the device is Rollbacked.
| ||||
| Chh3cIssuDeviceUpgradeWay | 1.3.6.1.4.1.25506.2.133.1.2.3.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Upgrade method of the card. none - No operation was performed. reboot - The upgrade method of this device is Reboot. sequenceReboot - The upgrade method of this device is SequenceReboot. issuReboot - The upgrade method of this device is IssuReboot. serviceUpgrade - The upgrade method of this device is ServiceReboot. fileUpgrade - The upgrade method of this device is FileReboot. incompatibleUpgrade - The upgrade method of this device is IncompatibleUpgrade.
| ||||
| Chh3cIssuUpgradeDeviceStatus | 1.3.6.1.4.1.25506.2.133.1.2.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Upgrade status of the device.
| ||||
| Chh3cIssuUpgradeFailedReason | 1.3.6.1.4.1.25506.2.133.1.2.3.1.8 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current Indicates the cause of 'failure' state of the object 'hh3cIssuUpgradeDeviceStatus'. This object would be a null string if the value of 'hh3cIssuCompatibleResultStatus' is not 'failure'. | ||||
| Nhh3cIssuUpgradeNotify | 1.3.6.1.4.1.25506.2.133.2 | |||
| Nhh3cIssuUpgradeTrapPrefix | 1.3.6.1.4.1.25506.2.133.2.0 | |||
| !hh3cIssuUpgradeOpCompletionNotify | 1.3.6.1.4.1.25506.2.133.2.0.1 | |||
notification · current An hh3cIssuUpgradeOpCompletionNotify is sent at the completion of upgrade operation denoted by hh3cIssuOp object, if such a notification was requested when the operation was initiated. hh3cIssuOpType indicates the type of the operation. hh3cIssuOpStatus indicates the result of the operation. hh3cIssuFailedReason indicates the operation failure reason. hh3cIssuOpTimeCompleted indicates the time when the operation was completed. | ||||
Traps / Notifications
- hh3cIssuUpgradeOpCompletionNotify
1.3.6.1.4.1.25506.2.133.2.0.1