HH3C-IPSEC-MONITOR-V2-MIB
H3CThe MIB is designed to get statistic information of IPsec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels.
snmptranslate -m HH3C-IPSEC-MONITOR-V2-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-IPSEC-MONITOR-V2-MIB <host> 1.3.6.1.4.1.25506.2.126Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cIPsecMonitorV2 | 1.3.6.1.4.1.25506.2.126 | |||
identity The MIB is designed to get statistic information of IPsec tunnels. With this MIB, we can get information of a certain tunnel or all tunnels. | ||||
| Nhh3cIPsecObjectsV2 | 1.3.6.1.4.1.25506.2.126.1 | |||
| Nhh3cIPsecScalarObjectsV2 | 1.3.6.1.4.1.25506.2.126.1.1 | |||
| Shh3cIPsecMIBVersion | 1.3.6.1.4.1.25506.2.126.1.1.1 | DisplayString (SIZE (0..255)) | RO | |
scalar · DisplayString (SIZE (0..255)) · read-only · current Version string of this MIB. | ||||
| Thh3cIPsecTunnelV2Table | 1.3.6.1.4.1.25506.2.126.1.2 | NA | ||
table · not-accessible · current The IPsec Phase-2 Tunnel Table. There is one entry in this table for each active IPsec Phase-2 Tunnel. | ||||
| Rhh3cIPsecTunnelV2Entry | 1.3.6.1.4.1.25506.2.126.1.2.1 | NA | ||
| Chh3cIPsecTunIndexV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.1 | Integer32 (1..2147483647) | AN | |
column · Integer32 (1..2147483647) · accessible-for-notify · current The index of IPsec Phase-2 Tunnel Table. The value of the index is a number which begins at one and is incremented with each tunnel that is created. The value of this object will wrap at 2147483647. | ||||
| Chh3cIPsecTunIfIndexV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The interface index( the ifIndex of ifTable ). | ||||
| Chh3cIPsecTunIKETunnelIndexV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.3 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The index of the associated IPsec Phase-1 IKE Tunnel (IKETunIndex in the IKETunnelTable). 2147483647 is defined as invalid value. | ||||
| Chh3cIPsecTunIKETunLocalIDTypeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.4 | Hh3cIPsecIDTypeV2 | RO | |
column · Hh3cIPsecIDTypeV2 · read-only · current The type of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalType in the IKETunnelTable). | ||||
| Chh3cIPsecTunIKETunLocalIDVal1V2 | 1.3.6.1.4.1.25506.2.126.1.2.1.5 | DisplayString (SIZE (0..255)) | RO | deprecated |
column · DisplayString (SIZE (0..255)) · read-only · deprecated The value of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable). If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer. If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations. The local peer identity may not exceed 255 characters in length. The complete value will be displayed by hh3cIPsecTunIKETunLocalIDVal3V2 | ||||
| Chh3cIPsecTunIKETunLocalIDVal2V2 | 1.3.6.1.4.1.25506.2.126.1.2.1.6 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The second specification of the local peer's IP address for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue2 in the IKETunnelTable). If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the local peer type is others, this is a zero-length string. | ||||
| Chh3cIPsecTunIKETunRemoteIDTypeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.7 | Hh3cIPsecIDTypeV2 | RO | |
column · Hh3cIPsecIDTypeV2 · read-only · current The type of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteType in the IKETunnelTable). | ||||
| Chh3cIPsecTunIKETunRemoteIDVal1V2 | 1.3.6.1.4.1.25506.2.126.1.2.1.8 | DisplayString (SIZE (0..255)) | RO | deprecated |
column · DisplayString (SIZE (0..255)) · read-only · deprecated The value of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable). If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer. If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations. The remote peer identity may not exceed 255 characters in length. The complete value will be displayed by hh3cIPsecTunIKETunRemoteIDVal3V2 | ||||
| Chh3cIPsecTunIKETunRemoteIDVal2V2 | 1.3.6.1.4.1.25506.2.126.1.2.1.9 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable). If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type is others, this is a zero-length string. | ||||
| Chh3cIPsecTunLocalAddrTypeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.10 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of the IP address for the local peer of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunLocalAddrV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.11 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the local peer for the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunRemoteAddrTypeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.12 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of the IP address for the remote peer of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunRemoteAddrV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.13 | InetAddress | RO | |
column · InetAddress · read-only · current The IP address of the remote peer for the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunKeyTypeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.14 | Hh3cIPsecNegoTypeV2 | RO | |
column · Hh3cIPsecNegoTypeV2 · read-only · current The key negotiate mode used by the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunEncapModeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.15 | Hh3cIPsecEncapModeV2 | RO | |
column · Hh3cIPsecEncapModeV2 · read-only · current The encapsulation mode used by the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInitiatorV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.16 | INTEGER | RO | |
column · INTEGER · read-only · current The initiator of this IPsec tunnel. Value none is used for manual IPsec tunnel, for there is no initiator or responder in this method.
| ||||
| Chh3cIPsecTunLifeSizeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.17 | Gauge32 | RO | |
column · Gauge32 · read-only · current The negotiated LifeSize of the IPsec Phase-2 Tunnel in kilobytes. 0 is defined as invalid value. | ||||
| Chh3cIPsecTunLifeTimeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.18 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The negotiated LifeTime of the IPsec Phase-2 Tunnel in seconds. 2147483647 is defined as invalid value. | ||||
| Chh3cIPsecTunRemainTimeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.19 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The remain time of SA in seconds. 2147483647 is defined as invalid value. | ||||
| Chh3cIPsecTunActiveTimeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.20 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The duration the IPsec Phase-2 Tunnel has been active in hundredths of seconds. 2147483647 is defined as invalid value. | ||||
| Chh3cIPsecTunRemainSizeV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.21 | Gauge32 | RO | |
column · Gauge32 · read-only · current The remain LifeSize of SA in kilobytes. 0 is defined as invalid value. | ||||
| Chh3cIPsecTunTotalRefreshesV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.22 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of security association refreshing performed. | ||||
| Chh3cIPsecTunCurrentSaInstancesV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.23 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of security associations which are currently active or expiring. | ||||
| Chh3cIPsecTunInSaEncryptAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.24 | Hh3cIPsecEncryptAlgoV2 | RO | |
column · Hh3cIPsecEncryptAlgoV2 · read-only · current The encryption algorithm used by the inbound security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInSaAhAuthAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.25 | Hh3cIPsecAuthAlgoV2 | RO | |
column · Hh3cIPsecAuthAlgoV2 · read-only · current The authentication algorithm used by the inbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInSaEspAuthAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.26 | Hh3cIPsecAuthAlgoV2 | RO | |
column · Hh3cIPsecAuthAlgoV2 · read-only · current The authentication algorithm used by the inbound encapsulation security protocol(ESP) security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunDiffHellmanGrpV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.27 | Hh3cIPsecDiffHellmanGrpV2 | RO | |
column · Hh3cIPsecDiffHellmanGrpV2 · read-only · current The Diffie Hellman Group used by the security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunOutSaEncryptAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.28 | Hh3cIPsecEncryptAlgoV2 | RO | |
column · Hh3cIPsecEncryptAlgoV2 · read-only · current The encryption algorithm used by the outbound security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunOutSaAhAuthAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.29 | Hh3cIPsecAuthAlgoV2 | RO | |
column · Hh3cIPsecAuthAlgoV2 · read-only · current The authentication algorithm used by the outbound authentication header (AH) security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunOutSaEspAuthAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.30 | Hh3cIPsecAuthAlgoV2 | RO | |
column · Hh3cIPsecAuthAlgoV2 · read-only · current The authentication algorithm used by the outbound encapsulation security protocol(ESP) security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunPolicyNameV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.31 | OCTET STRING (SIZE (1..63)) | RO | |
column · OCTET STRING (SIZE (1..63)) · read-only · current The policy name used by this IPsec tunnel. | ||||
| Chh3cIPsecTunPolicyNumV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.32 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The sequence number of policy used by this IPsec tunnel. | ||||
| Chh3cIPsecTunStatusV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.33 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the IPsec Tunnel.
| ||||
| Chh3cIPsecTunPolicyDescriptionV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.34 | OCTET STRING (SIZE (1..80)) | RO | |
column · OCTET STRING (SIZE (1..80)) · read-only · current IPsec policy description of an IPsec tunne. | ||||
| Chh3cIPsecTunIKETunLocalIDVal3V2 | 1.3.6.1.4.1.25506.2.126.1.2.1.35 | OCTET STRING (SIZE (0..2047)) | RO | |
column · OCTET STRING (SIZE (0..2047)) · read-only · current The value of the local peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunLocalValue1 in the IKETunnelTable). If the local peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the local peer. If the local peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the local peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the local peer type is fqdn/userFqdn, this is the host name used to identify the local peer. If the local peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the local peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations. | ||||
| Chh3cIPsecTunIKETunRemoteIDVal3V2 | 1.3.6.1.4.1.25506.2.126.1.2.1.36 | OCTET STRING (SIZE (0..2047)) | RO | |
column · OCTET STRING (SIZE (0..2047)) · read-only · current The value of the remote peer identity for the associated IPsec Phase-1 IKE Tunnel (IKETunRemoteValue1 in the IKETunnelTable). If the remote peer type is ipv4Addr/ipv6Addr, this is the IP address used to identify the remote peer. If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet address. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the beginning IP address of the range. If the remote peer type is fqdn/userFqdn, this is the host name used to identify the remote peer. If the remote peer type is derAsn1Dn, this is the binary DER encoding of an ASN.1 X.500 Distinguished Name [X.501] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is derAsn1Gn, this is the binary DER encoding of an ASN.1 X.500 GeneralName [X.509] of the principal whose certificates are being exchanged to establish the SA. If the remote peer type is keyId, this is an opaque byte stream which may be used to pass vendor-specific information necessary to identify which pre-shared key should be used to authenticate Aggressive mode negotiations. | ||||
| Chh3cIPsecTunProfileNameV2 | 1.3.6.1.4.1.25506.2.126.1.2.1.37 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The profile name used by this IPsec tunnel. | ||||
| Thh3cIPsecTunnelStatV2Table | 1.3.6.1.4.1.25506.2.126.1.3 | NA | ||
table · not-accessible · current The IPsec Phase-2 Tunnel Statistics Table. | ||||
| Rhh3cIPsecTunnelStatV2Entry | 1.3.6.1.4.1.25506.2.126.1.3.1 | NA | ||
| Chh3cIPsecTunInOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets received by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | ||||
| Chh3cIPsecTunInDecompOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of decompressed octets received by this IPsec Phase-2 Tunnel. This value is accumulated AFTER the packet is decompressed. | ||||
| Chh3cIPsecTunInPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets received by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped during receiving process by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInReplayDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped during receiving process due to Anti-Replay process by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInAuthFailsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound authentication's which ended in failure by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInDecryptFailsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound decryption's which ended in failure by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunOutOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets sent by this IPsec Phase-2 Tunnel. This value is accumulated AFTER determining whether or not the packet should be compressed. | ||||
| Chh3cIPsecTunOutUncompOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of uncompressed octets sent by this IPsec Phase-2 Tunnel. This value is accumulated BEFORE the packet is compressed. | ||||
| Chh3cIPsecTunOutPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets sent by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunOutDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped during sending process by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunOutEncryptFailsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of outbound encryption's which ended in failure by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunNoMemoryDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped due to no enough memory by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunQueueFullDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped due to queue full by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInvalidLenDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped due to invalid length packet by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunTooLongDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped due to too long packet by this IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecTunInvalidSaDropPktsV2 | 1.3.6.1.4.1.25506.2.126.1.3.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped due to invalid SA by this IPsec Phase-2 Tunnel. | ||||
| Thh3cIPsecSaV2Table | 1.3.6.1.4.1.25506.2.126.1.4 | NA | ||
table · not-accessible · current The IPsec Phase-2 Security Protection Index Table. This table contains an entry for each active and expiring security association. | ||||
| Rhh3cIPsecSaV2Entry | 1.3.6.1.4.1.25506.2.126.1.4.1 | NA | ||
row · not-accessible · current Information about hh3cIPsecSaV2Table. | ||||
| Chh3cIPsecSaIndexV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.1 | Integer32 (1..2147483647) | AN | |
column · Integer32 (1..2147483647) · accessible-for-notify · current The number of the Sa associated with the Phase-2 Tunnel Table. The value of this index is a number which begins at one and is incremented with each Sa associated with an IPsec Phase-2 Tunnel. The value of this object will wrap at 2,147,483,647. | ||||
| Chh3cIPsecSaDirectionV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The direction of the SA.
| ||||
| Chh3cIPsecSaSpiValueV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.3 | Unsigned32 (1..4294967295) | RO | |
column · Unsigned32 (1..4294967295) · read-only · current The value of the SPI. | ||||
| Chh3cIPsecSaSecProtocolV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.4 | Hh3cIPsecSaProtocolV2 | RO | |
column · Hh3cIPsecSaProtocolV2 · read-only · current The security protocol of the SA. | ||||
| Chh3cIPsecSaEncryptAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.5 | Hh3cIPsecEncryptAlgoV2 | RO | |
column · Hh3cIPsecEncryptAlgoV2 · read-only · current The encryption algorithm used by the security association of the IPsec Phase-2 Tunnel. | ||||
| Chh3cIPsecSaAuthAlgoV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.6 | Hh3cIPsecAuthAlgoV2 | RO | |
column · Hh3cIPsecAuthAlgoV2 · read-only · current The authentication algorithm used by the SA. | ||||
| Chh3cIPsecSaStatusV2 | 1.3.6.1.4.1.25506.2.126.1.4.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the SA.
| ||||
| Thh3cIPsecTrafficV2Table | 1.3.6.1.4.1.25506.2.126.1.5 | NA | ||
table · not-accessible · current The IPsec Phase-2 Tunnel Traffic Table. | ||||
| Rhh3cIPsecTrafficV2Entry | 1.3.6.1.4.1.25506.2.126.1.5.1 | NA | ||
| Chh3cIPsecTrafficLocalTypeV2 | 1.3.6.1.4.1.25506.2.126.1.5.1.1 | Hh3cIPsecTrafficTypeV2 | RO | |
column · Hh3cIPsecTrafficTypeV2 · read-only · current The type of the local peer's traffic. Possible values are: 1) A single IP address 2) An IP address range 3) An IP subnet | ||||
| Chh3cIPsecTrafficLocalAddr1TypeV2 | 1.3.6.1.4.1.25506.2.126.1.5.1.2 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of the first IP address specification for the local peer's traffic. | ||||
| Chh3cIPsecTrafficLocalAddr1V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.3 | InetAddress | RO | |
column · InetAddress · read-only · current The first IP address specification of the local peer's traffic. If the local peer's traffic type is single IP address, this is the IP address. If the local peer's traffic type is IP subnet, this is the subnet address. If the local peer's traffic type is IP address range, this is the beginning IP address of the range. | ||||
| Chh3cIPsecTrafficLocalAddr2TypeV2 | 1.3.6.1.4.1.25506.2.126.1.5.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of the second IP address specification for the local peer's traffic. | ||||
| Chh3cIPsecTrafficLocalAddr2V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.5 | InetAddress | RO | |
column · InetAddress · read-only · current The second IP address specification of the local peer's traffic. If the local peer's traffic type is single IP address, this is the IP address. If the local peer's traffic type is IP subnet, this is the subnet mask. If the local peer's traffic type is IP address range, this is the ending IP address of the range. | ||||
| Chh3cIPsecTrafficLocalProtocol1V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.6 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The first protocol number specification of the local peer's traffic. If the protocol type of the local peer's traffic is single protocol, this is the protocol number. If the protocol type of the local peer's traffic is protocol range, this is the beginning protocol number of the range. | ||||
| Chh3cIPsecTrafficLocalProtocol2V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.7 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The second protocol number specification of the local peer's traffic. If the protocol type of the local peer's traffic is single protocol, this is the protocol number. If the protocol type of the local peer's traffic is protocol range, this is the ending protocol number of the range. | ||||
| Chh3cIPsecTrafficLocalPort1V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.8 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The first port number specification of the local peer's traffic. If the port type of the local peer's traffic is single port, this is the port number. If the port type of the local peer's traffic is port range, this is the beginning port number of the range. | ||||
| Chh3cIPsecTrafficLocalPort2V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.9 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The second port number specification of the local peer's traffic. If the port type of the local peer's traffic is single port, this is the port number. If the port type of the local peer's traffic is port range, this is the ending port number of the range. | ||||
| Chh3cIPsecTrafficRemoteTypeV2 | 1.3.6.1.4.1.25506.2.126.1.5.1.10 | Hh3cIPsecTrafficTypeV2 | RO | |
column · Hh3cIPsecTrafficTypeV2 · read-only · current The type of the remote peer's traffic. Possible values are: 1) A single IP address 2) An IP address range 3) An IP subnet | ||||
| Chh3cIPsecTrafficRemAddr1TypeV2 | 1.3.6.1.4.1.25506.2.126.1.5.1.11 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of the first IP address specification for the remote peer's traffic. | ||||
| Chh3cIPsecTrafficRemAddr1V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.12 | InetAddress | RO | |
column · InetAddress · read-only · current The first IP address specification of the remote peer's traffic. If the remote traffic type is single IP address, this is the IP address. If the remote traffic type is IP subnet, this is the subnet address. If the remote traffic type is IP address range, this is the beginning IP address of the range. | ||||
| Chh3cIPsecTrafficRemAddr2TypeV2 | 1.3.6.1.4.1.25506.2.126.1.5.1.13 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of the second IP address specification for the remote peer's traffic. | ||||
| Chh3cIPsecTrafficRemAddr2V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.14 | InetAddress | RO | |
column · InetAddress · read-only · current The second IP address specification of the remote peer's traffic. If the remote traffic type is single IP address, this is the IP address. If the remote traffic type is IP subnet, this is the subnet mask. If the remote traffic type is IP address range, this is the ending IP address of the range. | ||||
| Chh3cIPsecTrafficRemoPro1V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.15 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The first protocol number specification of the remote peer's traffic. If the protocol type of the remote peer's traffic is single protocol, this is the protocol number. If the protocol type of the remote peer's traffic is protocol range, this is the beginning protocol number of the range. | ||||
| Chh3cIPsecTrafficRemoPro2V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.16 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The second protocol number specification of the remote peer's traffic. If the protocol type of the remote peer's traffic is single protocol, this is the protocol number. If the protocol type of the remote peer's traffic is protocol range, this is the ending protocol number of the range. | ||||
| Chh3cIPsecTrafficRemPort1V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.17 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The first port number specification of the remote peer's traffic. If the port type of the remote peer's traffic is single port, this is the port number. If the port type of the remote peer's traffic is port range, this is the beginning port number of the range. | ||||
| Chh3cIPsecTrafficRemPort2V2 | 1.3.6.1.4.1.25506.2.126.1.5.1.18 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current The second port number specification of the remote peer's traffic. If the port type of the remote peer's traffic is single port, this is the port number. If the port type of the remote peer's traffic is port range, this is the ending port number of the range. | ||||
| Nhh3cIPsecGlobalStatsV2 | 1.3.6.1.4.1.25506.2.126.1.6 | |||
| Shh3cIPsecGlobalActiveTunnelsV2 | 1.3.6.1.4.1.25506.2.126.1.6.1 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The total number of currently active IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalActiveSasV2 | 1.3.6.1.4.1.25506.2.126.1.6.2 | Gauge32 | RO | |
scalar · Gauge32 · read-only · current The total number of currently active or expiring IPsec Phase-2 SA. | ||||
| Shh3cIPsecGlobalInOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.6.3 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | ||||
| Shh3cIPsecGlobalInDecompOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.6.4 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of decompressed octets received by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER the packet is decompressed. | ||||
| Shh3cIPsecGlobalInPktsV2 | 1.3.6.1.4.1.25506.2.126.1.6.5 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets received by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalInDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.6 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped during receiving process by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalInReplayDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.7 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped during receiving process due to Anti-Replay process by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalInAuthFailsV2 | 1.3.6.1.4.1.25506.2.126.1.6.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of inbound authentication's which ended in failure by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalInDecryptFailsV2 | 1.3.6.1.4.1.25506.2.126.1.6.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of inbound decryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalOutOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.6.10 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. | ||||
| Shh3cIPsecGlobalOutUncompOctetsV2 | 1.3.6.1.4.1.25506.2.126.1.6.11 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of uncompressed octets sent by all current and previous IPsec Phase-2 Tunnels. This value is accumulated BEFORE the packet is compressed. | ||||
| Shh3cIPsecGlobalOutPktsV2 | 1.3.6.1.4.1.25506.2.126.1.6.12 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets sent by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalOutDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.13 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped during sending process by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalOutEncryptFailsV2 | 1.3.6.1.4.1.25506.2.126.1.6.14 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of outbound encryption's which ended in failure by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalNoMemoryDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.15 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped due to no enough memory by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalNoFindSaDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.16 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped due to not find SA by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalQueueFullDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.17 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped due to queue full by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalInvalidLenDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.18 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped due to invalid packet length by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalTooLongDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.19 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped due to too long packet by all current and previous IPsec Phase-2 Tunnels. | ||||
| Shh3cIPsecGlobalInvalidSaDropsV2 | 1.3.6.1.4.1.25506.2.126.1.6.20 | Counter64 | RO | |
scalar · Counter64 · read-only · current The total number of packets dropped due to invalid SA by all current and previous IPsec Phase-2 Tunnels. | ||||
| Nhh3cIPsecTrapObjectV2 | 1.3.6.1.4.1.25506.2.126.1.7 | |||
| Shh3cIPsecPolicyNameV2 | 1.3.6.1.4.1.25506.2.126.1.7.1 | OCTET STRING (SIZE (1..63)) | AN | |
scalar · OCTET STRING (SIZE (1..63)) · accessible-for-notify · current The IPsec policy name with a trap. | ||||
| Shh3cIPsecPolicySeqNumV2 | 1.3.6.1.4.1.25506.2.126.1.7.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The IPsec policy sequence number with a trap. | ||||
| Shh3cIPsecPolicySizeV2 | 1.3.6.1.4.1.25506.2.126.1.7.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The number of IPsec policies with a trap. | ||||
| Nhh3cIPsecTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8 | |||
| Shh3cIPsecTrapGlobalCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether all IPsec traps should be generated. | ||||
| Shh3cIPsecTunnelStartTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecTunnelStartV2 traps should be generated. | ||||
| Shh3cIPsecTunnelStopTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecTunnelStopV2 traps should be generated. | ||||
| Shh3cIPsecNoSaTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.4 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecNoSaFailureV2 traps should be generated. | ||||
| Shh3cIPsecAuthFailureTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecAuthFailFailureV2 traps should be generated. | ||||
| Shh3cIPsecEncryFailureTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecEncryFailFailureV2 traps should be generated. | ||||
| Shh3cIPsecDecryFailureTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecDecryFailFailureV2 traps should be generated. | ||||
| Shh3cIPsecInvalidSaTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecInvalidSaFailureV2 traps should be generated. | ||||
| Shh3cIPsecPolicyAddTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.9 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecPolicyAddV2 traps should be generated. | ||||
| Shh3cIPsecPolicyDelTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.10 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecPolicyDelV2 traps should be generated. | ||||
| Shh3cIPsecPolicyAttachTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.11 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecPolicyAttachV2 traps should be generated. | ||||
| Shh3cIPsecPolicyDetachTrapCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.12 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecPolicyDetachV2 traps should be generated. | ||||
| Shh3cIPsecConnectionStartCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.13 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecConnectionStartV2 traps should be generated. | ||||
| Shh3cIPsecConnectionStopCntlV2 | 1.3.6.1.4.1.25506.2.126.1.8.14 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether hh3cIPsecConnectionStopV2 traps should be generated. | ||||
| Nhh3cIPsecTrapV2 | 1.3.6.1.4.1.25506.2.126.1.9 | |||
| Nhh3cIPsecNotificationsV2 | 1.3.6.1.4.1.25506.2.126.1.9.0 | |||
| !hh3cIPsecTunnelStartV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.1 | |||
notification · current This notification is generated when an IPsec Phase-2 Tunnel is created. | ||||
| !hh3cIPsecTunnelStopV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.2 | |||
notification · current This notification is generated when an IPsec Phase-2 Tunnel is deleted. | ||||
| !hh3cIPsecNoSaFailureV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.3 | |||
notification · current This notification is generated when an IPsec Phase-2 non-existent SA error occurs. | ||||
| !hh3cIPsecAuthFailFailureV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.4 | |||
notification · current This notification is generated when the IPsec phase-2 authentication failure occurs. | ||||
| !hh3cIPsecEncryFailFailureV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.5 | |||
notification · current This notification is generated when the IPsec phase-2 tunnel has an encrypting failure. | ||||
| !hh3cIPsecDecryFailFailureV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.6 | |||
notification · current This notification is generated when the IPsec phase-2 tunnel has a decrypting failure. | ||||
| !hh3cIPsecInvalidSaFailureV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.7 | |||
notification · current This notification is generated when the IPsec phase-2 invalid SA failure occurs. | ||||
| !hh3cIPsecPolicyAddV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.8 | |||
notification · current This notification is generated when an IPsec policy is added. | ||||
| !hh3cIPsecPolicyDelV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.9 | |||
notification · current This notification is generated when an IPsec policy is deleted. | ||||
| !hh3cIPsecPolicyAttachV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.10 | |||
notification · current This notification is generated when an IPsec policy is attached with one interface. | ||||
| !hh3cIPsecPolicyDetachV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.11 | |||
notification · current This notification is generated when an IPsec policy is detached with one interface. | ||||
| !hh3cIPsecConnectionStartV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.12 | |||
notification · current This notification is generated when an IPsec connection is created.
| ||||
| !hh3cIPsecConnectionStopV2 | 1.3.6.1.4.1.25506.2.126.1.9.0.13 | |||
notification · current This notification is generated when an IPsec connection is terminated.
| ||||
| Thh3cIPsecTunnelStatByDescripV2Table | 1.3.6.1.4.1.25506.2.126.1.10 | NA | ||
table · not-accessible · current This table contains IPsec phase-2 tunnel statistics by description. | ||||
| Rhh3cIPsecTunnelStatByDescripV2Entry | 1.3.6.1.4.1.25506.2.126.1.10.1 | NA | ||
row · not-accessible · current An entry of IPsec phase-2 tunnels statistics by description table. | ||||
| Chh3cIPsecPolicyDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.1 | OCTET STRING (SIZE (1..80)) | AN | |
column · OCTET STRING (SIZE (1..80)) · accessible-for-notify · current The IPsec policy's description. | ||||
| Chh3cIPsecTunInOctetsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets received by IPsec phase-2 tunnels. This value is accumulated BEFORE determining whether or not the packet should be decompressed. | ||||
| Chh3cIPsecTunInDecompOctetsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of decompressed octets received by IPsec phase-2 tunnels. This value is accumulated AFTER the packet is decompressed. | ||||
| Chh3cIPsecTunInPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets received by IPsec phase-2 tunnels. | ||||
| Chh3cIPsecTunInDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels during receiving process. | ||||
| Chh3cIPsecTunInReplayDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of receive packets dropped by IPsec phase-2 tunnels due to Anti-Replay processing. | ||||
| Chh3cIPsecTunInAuthFailsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.7 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound authentication failures on IPsec phase-2 tunnels. | ||||
| Chh3cIPsecTunInDecryptFailsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of inbound decryption failures on IPsec phase-2 tunnels. | ||||
| Chh3cIPsecTunOutOctetsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.9 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of octets sent by IPsec phase-2 tunnels. This value is accumulated AFTER determining whether or not the packet should be compressed. | ||||
| Chh3cIPsecTunOutUncompOctetsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of uncompressed octets sent by IPsec phase-2 tunnels. This value is accumulated BEFORE the packet is compressed. | ||||
| Chh3cIPsecTunOutPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets sent by IPsec phase-2 tunnels. | ||||
| Chh3cIPsecTunOutDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.12 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels during sending process. | ||||
| Chh3cIPsecTunOutEncryptFailsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.13 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of outbound encryption failures on IPsec Phase-2 Tunnels. | ||||
| Chh3cIPsecTunNoMemoryDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.14 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels due to no enough memory. | ||||
| Chh3cIPsecTunQueueFullDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.15 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels due to queue full. | ||||
| Chh3cIPsecTunInvalidLenDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.16 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels due to invalid length packet. | ||||
| Chh3cIPsecTunTooLongDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.17 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels due to packet. | ||||
| Chh3cIPsecTunInvalidSaDropPktsByDescripV2 | 1.3.6.1.4.1.25506.2.126.1.10.1.18 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets dropped by IPsec phase-2 tunnels due to invalid SA. | ||||
| Nhh3cIPsecConformanceV2 | 1.3.6.1.4.1.25506.2.126.2 | |||
| Nhh3cIPsecCompliancesV2 | 1.3.6.1.4.1.25506.2.126.2.1 | |||
| Mhh3cIPsecComplianceV2 | 1.3.6.1.4.1.25506.2.126.2.1.1 | |||
| Nhh3cIPsecGroupsV2 | 1.3.6.1.4.1.25506.2.126.2.2 | |||
| Ghh3cIPsecScalarObjectsGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.1 | |||
| Ghh3cIPsecTunnelTableGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.2 | |||
group · current The group contains the IPsec tunnel's property information.
| ||||
| Ghh3cIPsecTunnelStatGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.3 | |||
group · current The group contains the IPsec tunnel's statistic information.
| ||||
| Ghh3cIPsecSaGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.4 | |||
group · current The group contains the SA's property information. | ||||
| Ghh3cIPsecTrafficTableGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.5 | |||
group · current The group contains the property information of the data flow protected by IPsec tunnel.
| ||||
| Ghh3cIPsecGlobalStatsGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.6 | |||
group · current The group contains all of the IPsec tunnel's statistic information.
| ||||
| Ghh3cIPsecTrapObjectGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.7 | |||
group · current The group contains all of trap objects of IPsec tunnels. | ||||
| Ghh3cIPsecTrapCntlGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.8 | |||
group · current The group contains all of trap switches of IPsec tunnels.
| ||||
| Ghh3cIPsecTrapGroupV2 | 1.3.6.1.4.1.25506.2.126.2.2.9 | |||
group · current The group contains all of trap of IPsec tunnels.
| ||||
Textual conventions
Hh3cIPsecAuthAlgoV2INTEGERaesXcbcMac(6)invalidAlg(2147483647)md5(1)none(0)sha1(2)sha256(3)sha384(4)sha512(5)sm3(128)The authentication algorithm used in the IKE negotiations. invalidAlg(2147483647) is defined as invalid value.
Hh3cIPsecDiffHellmanGrpV2INTEGERdhGroup1(1)dhGroup14(14)dhGroup2(2)dhGroup24(24)dhGroup5(5)invalidGroup(2147483647)none(0)The Diffie Hellman Group used in the IKE and IPsec negotiations. invalidGroup(2147483647) is defined as invalid value.
Hh3cIPsecEncapModeV2INTEGERinvalidMode(2147483647)transport(2)tunnel(1)The encapsulation mode used by an IPsec Phase-2 Tunnel. invalidMode(2147483647) is defined as invalid value.
Hh3cIPsecEncryptAlgoV2INTEGERaesCamelliaCbc(13)aesCbc(7)aesCbc128(9)aesCbc192(10)aesCbc256(11)aesCtr(12)aesCtr128(15)aesCtr192(16)aesCtr256(17)blowfishCbc(3)camelliaCbc128(18)camelliaCbc192(19)camelliaCbc256(20)castCbc(6)desCbc(1)gcm128(24)gcm192(25)gcm256(26)gmac128(21)gmac192(22)gmac256(23)ideaCbc(2)invalidAlg(2147483647)none(0)nsaCbc(8)rc4(14)rc5R16B64Cbc(4)sm1Cbc128(128)sm1Cbc192(129)sm1Cbc256(130)sm4Cbc(131)tripleDesCbc(5)The encryption algorithm used in the IKE and IPsec negotiations. invalidAlg(2147483647) is defined as invalid value.
Hh3cIPsecIDTypeV2INTEGERderAsn1Dn(9)derAsn1Gn(10)fqdn(2)ipv4Addr(1)ipv4AddrRange(7)ipv4AddrSubnet(4)ipv6Addr(5)ipv6AddrRange(8)ipv6AddrSubnet(6)keyId(11)reserved(0)userFqdn(3)The type of IPsec Identity.
Hh3cIPsecNegoTypeV2INTEGERike(1)invalidType(2147483647)manual(2)The type of key used by an IPsec Phase-2 Tunnel. invalidType(2147483647) is defined as invalid value.
Hh3cIPsecSaProtocolV2INTEGERah(2)esp(3)ipcomp(4)reserved(0)The protocol of security association.
Hh3cIPsecTrafficTypeV2INTEGERipv4Addr(1)ipv4AddrRange(7)ipv4AddrSubnet(4)ipv6Addr(5)ipv6AddrRange(8)ipv6AddrSubnet(6)The type of the data flow.
Hh3cIPsecTunnelStateV2INTEGERactive(1)timeout(2)The state of IPsec tunnel.
Traps / Notifications
- hh3cIPsecAuthFailFailureV2
1.3.6.1.4.1.25506.2.126.1.9.0.4 - hh3cIPsecConnectionStartV2
1.3.6.1.4.1.25506.2.126.1.9.0.12 - hh3cIPsecConnectionStopV2
1.3.6.1.4.1.25506.2.126.1.9.0.13 - hh3cIPsecDecryFailFailureV2
1.3.6.1.4.1.25506.2.126.1.9.0.6 - hh3cIPsecEncryFailFailureV2
1.3.6.1.4.1.25506.2.126.1.9.0.5 - hh3cIPsecInvalidSaFailureV2
1.3.6.1.4.1.25506.2.126.1.9.0.7 - hh3cIPsecNoSaFailureV2
1.3.6.1.4.1.25506.2.126.1.9.0.3 - hh3cIPsecPolicyAddV2
1.3.6.1.4.1.25506.2.126.1.9.0.8 - hh3cIPsecPolicyAttachV2
1.3.6.1.4.1.25506.2.126.1.9.0.10 - hh3cIPsecPolicyDelV2
1.3.6.1.4.1.25506.2.126.1.9.0.9 - hh3cIPsecPolicyDetachV2
1.3.6.1.4.1.25506.2.126.1.9.0.11 - hh3cIPsecTunnelStartV2
1.3.6.1.4.1.25506.2.126.1.9.0.1 - hh3cIPsecTunnelStopV2
1.3.6.1.4.1.25506.2.126.1.9.0.2