HH3C-HPEOC-MIB
H3CThe objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
snmptranslate -m HH3C-HPEOC-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-HPEOC-MIB <host> 1.3.6.1.4.1.25506.2.84Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cHPEOC | 1.3.6.1.4.1.25506.2.84 | |||
identity The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification. | ||||
| Nhh3cHPEOCSystem | 1.3.6.1.4.1.25506.2.84.1 | |||
| Shh3cHPEOCCltVlanType | 1.3.6.1.4.1.25506.2.84.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode.
| ||||
| Thh3cHPEOCCltVlanManTable | 1.3.6.1.4.1.25506.2.84.1.2 | NA | ||
table · not-accessible · current This table implements the management of CLT(Coax Line Terminal) VLAN. | ||||
| Rhh3cHPEOCCltVlanManEntry | 1.3.6.1.4.1.25506.2.84.1.2.1 | NA | ||
| Chh3cHPEOCCltEthPortType | 1.3.6.1.4.1.25506.2.84.1.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug.
| ||||
| Thh3cHPEOCCltSysManTable | 1.3.6.1.4.1.25506.2.84.1.3 | NA | ||
table · not-accessible · current This table implements the management of CLT(Coax Line Terminal). | ||||
| Rhh3cHPEOCCltSysManEntry | 1.3.6.1.4.1.25506.2.84.1.3.1 | NA | ||
| Chh3cHPEOCCltDescr | 1.3.6.1.4.1.25506.2.84.1.3.1.1 | DisplayString (SIZE (0..126)) | RW | |
column · DisplayString (SIZE (0..126)) · read-write · current Set the description of CLT. | ||||
| Chh3cHPEOCCltFwVersion | 1.3.6.1.4.1.25506.2.84.1.3.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current EOC firmware version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cHPEOCCltLinkState | 1.3.6.1.4.1.25506.2.84.1.3.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The cable port's link state. The physicaldown(1) state indicates that the CLT is not powered on. The linkdown(2) state indicates that the CLT is powered on, but registers fail. The linkup(3) state indicates that the CLT is powered on, and registers successful. The loopback(4) state indecates that the CLT is powered on and registers successful, but loopback has detected.
| ||||
| Thh3cHPEOCCnuSysManTable | 1.3.6.1.4.1.25506.2.84.1.4 | NA | ||
table · not-accessible · current This table implements the management of CNUs. | ||||
| Rhh3cHPEOCCnuSysManEntry | 1.3.6.1.4.1.25506.2.84.1.4.1 | NA | ||
| Chh3cHPEOCCnuBcastControl | 1.3.6.1.4.1.25506.2.84.1.4.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. | ||||
| Chh3cHPEOCCnuAnonymStatus | 1.3.6.1.4.1.25506.2.84.1.4.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account. | ||||
| Chh3cHPEOCCnuMacLimit | 1.3.6.1.4.1.25506.2.84.1.4.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU. | ||||
| Shh3cHPEOCCltAutoUpgrade | 1.3.6.1.4.1.25506.2.84.1.5 | TruthValue | RW | |
scalar · TruthValue · read-write · current Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed. | ||||
| Shh3cHPEOCOnLineCnuNumber | 1.3.6.1.4.1.25506.2.84.1.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of the online CNU(s). | ||||
| Shh3cHPEOCCpuMacAddress | 1.3.6.1.4.1.25506.2.84.1.7 | MacAddress | RO | |
scalar · MacAddress · read-only · current EOC CPU's MAC address. | ||||
| Shh3cHPEOCOffLineCnuNumber | 1.3.6.1.4.1.25506.2.84.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The total number of the offline CNU(s). | ||||
| Shh3cHPEOCDownLoadCNUFWResult | 1.3.6.1.4.1.25506.2.84.1.9 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current Download CNU firmware result. | ||||
| Shh3cHPEOCCltAutoUpgradeType | 1.3.6.1.4.1.25506.2.84.1.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Type of auto upgrade status.
It depends on hh3cHPEOCCltAutoUpgrade status.
flash - The CLT auto upgrade the firmware inside its flash
to the CNUs.
ftp - First download the firmware from FTP server to the CLT,
then the CLT auto upgrade the firmware to the CNUs.
tftp - First download the firmware from TFTP server to the CLT,
then the CLT auto upgrade the firmware to the CNUs.
| ||||
| Nhh3cHPEOCAutoUpObjects | 1.3.6.1.4.1.25506.2.84.1.11 | |||
| Shh3cHPEOCServerAddress | 1.3.6.1.4.1.25506.2.84.1.11.1 | IpAddress | RW | |
scalar · IpAddress · read-write · current The address of remote host acting as server for operation. The default value is 0.0.0.0 | ||||
| Shh3cHPEOCServerUser | 1.3.6.1.4.1.25506.2.84.1.11.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters. | ||||
| Shh3cHPEOCServerPassword | 1.3.6.1.4.1.25506.2.84.1.11.3 | DisplayString | RW | |
scalar · DisplayString · read-write · current Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters. | ||||
| Shh3cHPEOCCltLoopbackDetect | 1.3.6.1.4.1.25506.2.84.1.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Loopback detect Status. true(1) - The loopback detect is enabled. false(0)- The loopback detect is disabled.
| ||||
| Shh3cHPEOCTemplateEnable | 1.3.6.1.4.1.25506.2.84.1.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use template for white-list cnu. true(1) - Use template is enabled. false(0)- Use template detect is disabled.
| ||||
| Nhh3cHPEOCCableInfo | 1.3.6.1.4.1.25506.2.84.2 | |||
| Thh3cHPEOCCableInfoTable | 1.3.6.1.4.1.25506.2.84.2.1 | NA | ||
table · not-accessible · current This table defines the primary parameters of the cable information. | ||||
| Rhh3cHPEOCCableInfoEntry | 1.3.6.1.4.1.25506.2.84.2.1.1 | NA | ||
| Chh3cHPEOCFECErrors | 1.3.6.1.4.1.25506.2.84.2.1.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend. | ||||
| Chh3cHPEOCAvgBitsPerCarrier | 1.3.6.1.4.1.25506.2.84.2.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The cable port's average bits per carrier. | ||||
| Chh3cHPEOCAvgSNRPerCarrier | 1.3.6.1.4.1.25506.2.84.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The cable port's signal noise ratio(SNR) bits per carrier. | ||||
| Chh3cHPEOCAvgInPBCRCErrors | 1.3.6.1.4.1.25506.2.84.2.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The input PB CRC errors on average. | ||||
| Chh3cHPEOCInTotalPkts | 1.3.6.1.4.1.25506.2.84.2.1.1.5 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of packets(including bad packets) received on this interface. | ||||
| Chh3cHPEOCAvgOutPower | 1.3.6.1.4.1.25506.2.84.2.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The cable port's power sent on average, the unit is db. | ||||
| Chh3cHPEOCAvgOutPBCRCErrors | 1.3.6.1.4.1.25506.2.84.2.1.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average. | ||||
| Chh3cHPEOCOutTotalPkts | 1.3.6.1.4.1.25506.2.84.2.1.1.8 | Counter64 | RO | |
column · Counter64 · read-only · current The total count of the packets(including bad packets) sent on this interface. | ||||
| Thh3cHPEOCBitPerSymbolTable | 1.3.6.1.4.1.25506.2.84.2.2 | NA | ||
table · not-accessible · current This table defines the bits per symbol parameters of the cable line. | ||||
| Rhh3cHPEOCBitPerSymbolEntry | 1.3.6.1.4.1.25506.2.84.2.2.1 | NA | ||
row · not-accessible · current The entry of the table hh3cHPEOCBitPerSymbolTable. | ||||
| Chh3cHPEOCBitPerSymbolIndex | 1.3.6.1.4.1.25506.2.84.2.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index of the hh3cHPEOCBitPerSymbolTable. | ||||
| Chh3cHPEOCBitPerSymbol | 1.3.6.1.4.1.25506.2.84.2.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current hh3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map. | ||||
| Nhh3cHPEOCTemplate | 1.3.6.1.4.1.25506.2.84.3 | |||
| Thh3cHPEOCTemplateGlobalTable | 1.3.6.1.4.1.25506.2.84.3.1 | NA | ||
table · not-accessible · current This table defines the global parameters of the Template information. | ||||
| Rhh3cHPEOCTemplateGlobalEntry | 1.3.6.1.4.1.25506.2.84.3.1.1 | NA | ||
row · not-accessible · current The entry of the table hh3cHPEOCTemplateGlobalTable. | ||||
| Chh3cHPEOCTemplateIndex | 1.3.6.1.4.1.25506.2.84.3.1.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The index of cable Template. | ||||
| Chh3cHPEOCTemplateType | 1.3.6.1.4.1.25506.2.84.3.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The cable Template's type, can not change after create it.
| ||||
| Chh3cHPEOCTemplateName | 1.3.6.1.4.1.25506.2.84.3.1.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current The cable Template's name, it's recommended to set it uniquely and understandably. Length: 1 to 15 characters. | ||||
| Chh3cHPEOCTemplateDescr | 1.3.6.1.4.1.25506.2.84.3.1.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current The cable Template's description. Length: 0 to 63 characters. | ||||
| Chh3cHPEOCTemplateCnuMaxDownBW | 1.3.6.1.4.1.25506.2.84.3.1.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Maximum downstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. | ||||
| Chh3cHPEOCTemplateCnuMaxUpBW | 1.3.6.1.4.1.25506.2.84.3.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Maximum upstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. | ||||
| Chh3cHPEOCTemplateCnuBcastControl | 1.3.6.1.4.1.25506.2.84.3.1.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. | ||||
| Chh3cHPEOCTemplateCnuMacLimit | 1.3.6.1.4.1.25506.2.84.3.1.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU. | ||||
| Chh3cHPEOCTemplateCb201VlanEn | 1.3.6.1.4.1.25506.2.84.3.1.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Use for Cb201 cnu only. true(1) - Enable vlan insert function. false(2) - Disable vlan insert function. | ||||
| Chh3cHPEOCTemplateRowStatus | 1.3.6.1.4.1.25506.2.84.3.1.1.10 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status. | ||||
| Thh3cHPEOCTemplateSwitchTable | 1.3.6.1.4.1.25506.2.84.3.2 | NA | ||
table · not-accessible · current This table defines the port parameters of the switch type cnu. it's not affect on the type of gateway Template. | ||||
| Rhh3cHPEOCTemplateSwitchEntry | 1.3.6.1.4.1.25506.2.84.3.2.1 | NA | ||
row · not-accessible · current The entry of the table hh3cHPEOCTemplateSwitchTable. | ||||
| Chh3cHPEOCTemplateUniIndex | 1.3.6.1.4.1.25506.2.84.3.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index value which uniquely identifies the FE interface of the CNU. | ||||
| Chh3cHPEOCTemplateUniSpeed | 1.3.6.1.4.1.25506.2.84.3.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current User network interface speed.
| ||||
| Chh3cHPEOCTemplateUniDuplex | 1.3.6.1.4.1.25506.2.84.3.2.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current User network interface mode.
| ||||
| Chh3cHPEOCTemplateUniPriority | 1.3.6.1.4.1.25506.2.84.3.2.1.4 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. | ||||
| Chh3cHPEOCTemplateUniFlowControl | 1.3.6.1.4.1.25506.2.84.3.2.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable. | ||||
| Chh3cHPEOCTemplateUniUpLineRate | 1.3.6.1.4.1.25506.2.84.3.2.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The max speed upload in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line. | ||||
| Chh3cHPEOCTemplateUniDownLineRate | 1.3.6.1.4.1.25506.2.84.3.2.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The max speed download in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the download speed is only restricted by the physical line. | ||||
| Chh3cHPEOCTemplateUniAdminStatus | 1.3.6.1.4.1.25506.2.84.3.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.
| ||||
| Chh3cHPEOCTemplateUniVLANType | 1.3.6.1.4.1.25506.2.84.3.2.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current port vlan types. hybrid (3) port can carry multiple VLANs.
| ||||
| Chh3cHPEOCTemplateUniPvid | 1.3.6.1.4.1.25506.2.84.3.2.1.10 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. | ||||
| Chh3cHPEOCTemplateUniVlanTag | 1.3.6.1.4.1.25506.2.84.3.2.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current VLAN is set tagged or untagged.
| ||||
| Nhh3cHPEOCCnuAccess | 1.3.6.1.4.1.25506.2.84.4 | |||
| Thh3cHPEOCCnuAccessTable | 1.3.6.1.4.1.25506.2.84.4.1 | NA | ||
table · not-accessible · current This table defines the global parameters of the cnu type permitting to access. | ||||
| Rhh3cHPEOCCnuAccessEntry | 1.3.6.1.4.1.25506.2.84.4.1.1 | NA | ||
row · not-accessible · current The entry of the table hh3cHPEOCCnuAccessTable. | ||||
| Chh3cHPEOCCnuAccessIndex | 1.3.6.1.4.1.25506.2.84.4.1.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The index value which uniquely identifies the manuinfo of the CNU. | ||||
| Chh3cHPEOCCnuHFID | 1.3.6.1.4.1.25506.2.84.4.1.1.2 | DisplayString | RW | |
column · DisplayString · read-write · current The Cnu's HFID. Every type Cnu has it's unique HFID. Length: 1 to 64 characters. | ||||
| Chh3cHPEOCManuInfo | 1.3.6.1.4.1.25506.2.84.4.1.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current The Cnu's manufactory infofamiont. Length: 0 to 63 characters. | ||||
| Chh3cHPEOCCnuType | 1.3.6.1.4.1.25506.2.84.4.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The Cnu's function type.
| ||||
| Chh3cHPEOCCnuSwitchType | 1.3.6.1.4.1.25506.2.84.4.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The Cnu's switch chip type. It's useless for gataway type cnu.
| ||||
| Chh3cHPEOCCnuUniNum | 1.3.6.1.4.1.25506.2.84.4.1.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Uni number of the Cnu. It's useless for gataway type cnu. | ||||
| Chh3cHPEOCCnuPhy2Uni | 1.3.6.1.4.1.25506.2.84.4.1.1.7 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Reflection from phy port to uni port of the cnu.
It's useless for gataway type cnu.
For example, phy port 0,1,2,3 is reflect to uni port
1,2,3,4, then the value of this mib is {0,1,2,3} | ||||
| Chh3cHPEOCCnuAccessRowStatus | 1.3.6.1.4.1.25506.2.84.4.1.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status. | ||||