HH3C-HGMP-MIB
H3CThis MIB contains objects to manage the hh3chgmp operations, which are used on lanswitch products.
snmptranslate -m HH3C-HGMP-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-HGMP-MIB <host> 1.3.6.1.4.1.25506.8.7Imports
| HH3C-OID-MIB | hh3cRhw |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cHgmp | 1.3.6.1.4.1.25506.8.7 | |||
identity This MIB contains objects to manage the hh3chgmp operations, which are used on lanswitch products. | ||||
| Nhh3cClusterObject | 1.3.6.1.4.1.25506.8.7.1 | |||
node · current This MIB contains objects to manage the cluster operations, which are used on lanswitch products. | ||||
| Nhh3chgmpEventsV2 | 1.3.6.1.4.1.25506.8.7.1.0 | |||
node · current Definition point for cluster notifications. | ||||
| !hh3chgmpMemberfailure | 1.3.6.1.4.1.25506.8.7.1.0.1 | |||
notification · current When a cluster member failure, send a snmp trap to the network management.
| ||||
| !hh3chgmpMemberRecover | 1.3.6.1.4.1.25506.8.7.1.0.2 | |||
notification · current When a cluster member recover, send a snmp trap to the network management.
| ||||
| !hh3chgmpMemberStatusChange | 1.3.6.1.4.1.25506.8.7.1.0.3 | |||
notification · current When a cluster member status change, send a snmp trap to the network management. | ||||
| !hh3chgmpNetTopChange | 1.3.6.1.4.1.25506.8.7.1.0.4 | |||
notification · current When net topology of this cluster change, send a snmp trap to the network management. | ||||
| Shh3chgmpSetVLANSecurity | 1.3.6.1.4.1.25506.8.7.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configure whether to perform the VLAN check inside the cluster.
| ||||
| Shh3chgmpHandShakeInterval | 1.3.6.1.4.1.25506.8.7.1.2 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Handshaking interval of the cluster member switches. | ||||
| Shh3chgmpHandShakeHoldtime | 1.3.6.1.4.1.25506.8.7.1.3 | Integer32 (1..255) | RW | |
scalar · Integer32 (1..255) · read-write · current Holdtime of administrator switch and member switch in the cluster. | ||||
| Shh3chgmpGrpMemberTableChange | 1.3.6.1.4.1.25506.8.7.1.4 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more. | ||||
| Shh3chgmpMemberDisconRate | 1.3.6.1.4.1.25506.8.7.1.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Disconnection times of the member and administrator switches divided by member number times 1000. | ||||
| Shh3chgmpCmdLanswitchFlag | 1.3.6.1.4.1.25506.8.7.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Administrator switch flag
| ||||
| Shh3chgmpCmdClusterName | 1.3.6.1.4.1.25506.8.7.1.7 | OCTET STRING (SIZE (0..8)) | RW | |
scalar · OCTET STRING (SIZE (0..8)) · read-write · current Cluster name of the administrator switch | ||||
| Shh3chgmpMngPriIpSegCMIP | 1.3.6.1.4.1.25506.8.7.1.8 | IpAddress | RW | |
scalar · IpAddress · read-write · current The private management IP address of the administrator switch, which can not be modified after the cluster has been created. | ||||
| Shh3chgmpMngPriIpMask | 1.3.6.1.4.1.25506.8.7.1.9 | IpAddress | RW | |
scalar · IpAddress · read-write · current The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created. | ||||
| Shh3chgmpFtpServer | 1.3.6.1.4.1.25506.8.7.1.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch. | ||||
| Shh3chgmpTftpServer | 1.3.6.1.4.1.25506.8.7.1.11 | IpAddress | RW | |
scalar · IpAddress · read-write · current The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch. | ||||
| Shh3chgmpSnmpHost | 1.3.6.1.4.1.25506.8.7.1.12 | IpAddress | RW | |
scalar · IpAddress · read-write · current The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch. | ||||
| Shh3chgmpLogHost | 1.3.6.1.4.1.25506.8.7.1.13 | IpAddress | RW | |
scalar · IpAddress · read-write · current Log host of the cluster, which can only be configured and accessed on the administrator switch. | ||||
| Thh3chgmpGrpMemberTable | 1.3.6.1.4.1.25506.8.7.1.14 | NA | ||
table · not-accessible · current Table of cluster member switches | ||||
| Rhh3chgmpGrpMemberEntry | 1.3.6.1.4.1.25506.8.7.1.14.1 | NA | ||
row · not-accessible · current | ||||
| Chh3chgmpGrpMemberDeviceId | 1.3.6.1.4.1.25506.8.7.1.14.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number. | ||||
| Chh3chgmpGrpMemberSerial | 1.3.6.1.4.1.25506.8.7.1.14.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. | ||||
| Chh3chgmpGrpMemberIpAddr | 1.3.6.1.4.1.25506.8.7.1.14.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The private IP addresses of the member switches for the communication inside the cluster. | ||||
| Chh3chgmpGrpMemberName | 1.3.6.1.4.1.25506.8.7.1.14.1.4 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current Hostname of the member switch | ||||
| Chh3chgmpGrpMemberPassword | 1.3.6.1.4.1.25506.8.7.1.14.1.5 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Member password for joining a cluster | ||||
| Chh3chgmpGrpMemberPlatform | 1.3.6.1.4.1.25506.8.7.1.14.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. | ||||
| Chh3chgmpGrpMemberStatus | 1.3.6.1.4.1.25506.8.7.1.14.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Member status on the administrator switch, use for displaying the network management status.
| ||||
| Chh3chgmpGrpMemberDisconCount | 1.3.6.1.4.1.25506.8.7.1.14.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Count of inside communication disconnection between the member switch and the administrator switch. | ||||
| Chh3chgmpGrpMemberEnrollTime | 1.3.6.1.4.1.25506.8.7.1.14.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Enrollment time of the member, measured in seconds. | ||||
| Chh3chgmpGrpMemberOperate | 1.3.6.1.4.1.25506.8.7.1.14.1.10 | RowStatus | RW | |
column · RowStatus · read-write · current Operation indication field, indicates the operation of adding/removing a member by the network management agent. | ||||
| Thh3chgmpMemberResetTable | 1.3.6.1.4.1.25506.8.7.1.15 | NA | ||
table · not-accessible · current Reset a member switch in the cluster. | ||||
| Rhh3chgmpMemberResetEntry | 1.3.6.1.4.1.25506.8.7.1.15.1 | NA | ||
row · not-accessible · current | ||||
| Chh3chgmpMemberResetMAC | 1.3.6.1.4.1.25506.8.7.1.15.1.1 | OCTET STRING (SIZE (0..6)) | RO | |
column · OCTET STRING (SIZE (0..6)) · read-only · current The management MAC address of the switch to be reset, which is the unique identifier of the switch. | ||||
| Chh3chgmpMemberEraseflash | 1.3.6.1.4.1.25506.8.7.1.15.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned.
| ||||
| Shh3chgmpClusterRole | 1.3.6.1.4.1.25506.8.7.1.16 | INTEGER | RO | |
scalar · INTEGER · read-only · current This switch's role in cluster.
| ||||
| Shh3chgmpClusterMaxPoolNum | 1.3.6.1.4.1.25506.8.7.1.17 | INTEGER | RO | |
scalar · INTEGER · read-only · current Max switch members that the cluster can support(include administrator switch). | ||||
| Shh3chgmpClusterCmdSwMac | 1.3.6.1.4.1.25506.8.7.1.18 | OCTET STRING (SIZE (0..6)) | RO | |
scalar · OCTET STRING (SIZE (0..6)) · read-only · current The MAC address of administrator switch. It will be filled with zero when not be a member of cluster. | ||||
| Shh3chgmpRun | 1.3.6.1.4.1.25506.8.7.1.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable cluster on this switch.
| ||||
| Nhh3chgmpProtocolMac | 1.3.6.1.4.1.25506.8.7.1.22 | |||
| Shh3chgmpClusterProtocolMac | 1.3.6.1.4.1.25506.8.7.1.22.1 | MacAddress | RW | |
scalar · MacAddress · read-write · current Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC. | ||||
| Nhh3chgmpTopologyManagement | 1.3.6.1.4.1.25506.8.7.1.23 | |||
| Thh3chgmpWhitelistTable | 1.3.6.1.4.1.25506.8.7.1.23.1 | NA | ||
table · not-accessible · current Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure. | ||||
| Rhh3chgmpWhitelistEntry | 1.3.6.1.4.1.25506.8.7.1.23.1.1 | NA | ||
| Chh3chgmpWhitelistDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.1.1.1 | OCTET STRING (SIZE (10)) | NA | |
column · OCTET STRING (SIZE (10)) · not-accessible · current Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. | ||||
| Chh3chgmpWhitelistSerial | 1.3.6.1.4.1.25506.8.7.1.23.1.1.2 | Integer32 (0..2047 | 65535) | RO | |
column · Integer32 (0..2047 | 65535) · read-only · current When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object. | ||||
| Chh3chgmpWhitelistRowStatus | 1.3.6.1.4.1.25506.8.7.1.23.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this table. | ||||
| Thh3chgmpWhitelistNbTable | 1.3.6.1.4.1.25506.8.7.1.23.2 | NA | ||
table · not-accessible · current Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology. | ||||
| Rhh3chgmpWhitelistNbEntry | 1.3.6.1.4.1.25506.8.7.1.23.2.1 | NA | ||
| Chh3chgmpWhitelistNbIndex | 1.3.6.1.4.1.25506.8.7.1.23.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'. | ||||
| Chh3chgmpWhitelistNbDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.2.1.2 | OCTET STRING (SIZE (10)) | RO | |
column · OCTET STRING (SIZE (10)) · read-only · current Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. | ||||
| Chh3chgmpWhitelistPortName | 1.3.6.1.4.1.25506.8.7.1.23.2.1.3 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'. | ||||
| Chh3chgmpWhitelistNbPortName | 1.3.6.1.4.1.25506.8.7.1.23.2.1.4 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'. | ||||
| Thh3chgmpBlacklistTable | 1.3.6.1.4.1.25506.8.7.1.23.3 | NA | ||
table · not-accessible · current Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster. | ||||
| Rhh3chgmpBlacklistEntry | 1.3.6.1.4.1.25506.8.7.1.23.3.1 | NA | ||
| Chh3chgmpBlacklistDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.3.1.1 | OCTET STRING (SIZE (10)) | NA | |
column · OCTET STRING (SIZE (10)) · not-accessible · current Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. | ||||
| Chh3chgmpBlacklistAccessDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.3.1.2 | OCTET STRING (SIZE (10)) | RO | |
column · OCTET STRING (SIZE (10)) · read-only · current Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. | ||||
| Chh3chgmpBlacklistAccessPortName | 1.3.6.1.4.1.25506.8.7.1.23.3.1.3 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object. | ||||
| Chh3chgmpBlacklistRowStatus | 1.3.6.1.4.1.25506.8.7.1.23.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this table. | ||||
| Thh3chgmpMemberPriPortTable | 1.3.6.1.4.1.25506.8.7.1.24 | NA | ||
table · not-accessible · current This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address. | ||||
| Rhh3chgmpMemberPriPortEntry | 1.3.6.1.4.1.25506.8.7.1.24.1 | NA | ||
row · not-accessible · current Information about a specified member private port entry. The indexes of the entry are hh3chgmpGrpMemberDevId and hh3chgmpMemberPriPortProto, which indicate entries in the table. | ||||
| Chh3chgmpMemberDevId | 1.3.6.1.4.1.25506.8.7.1.24.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. | ||||
| Chh3chgmpMemberPriPortProto | 1.3.6.1.4.1.25506.8.7.1.24.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index of this table. Each instance value of this object corresponds to a different protocol. | ||||
| Chh3chgmpMemberPriPortProtoDescr | 1.3.6.1.4.1.25506.8.7.1.24.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current It describes the hh3chgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hh3chgmpMemberPriPortProtocol value is 1. | ||||
| Chh3chgmpMemberPriPortNum | 1.3.6.1.4.1.25506.8.7.1.24.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The private port number of member switch, used by specified hh3chgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hh3chgmpGrpMemberIpAddr. | ||||
| Nhh3cStackObject | 1.3.6.1.4.1.25506.8.7.2 | |||
node · current This MIB contains objects to manage the stack operations, which is used on lanswitch products. | ||||
| Nhh3chgmpStackEventsV2 | 1.3.6.1.4.1.25506.8.7.2.0 | |||
node · current Definition point for Stack notifications. | ||||
| !hh3chgmpStackMemberfailure | 1.3.6.1.4.1.25506.8.7.2.0.1 | |||
notification · current When a stack member failure, send a snmp trap to the network management.
| ||||
| !hh3chgmpStackMemberRecover | 1.3.6.1.4.1.25506.8.7.2.0.2 | |||
notification · current When a stack member Recover, send a snmp trap to the network management.
| ||||
| !hh3chgmpStackMemberStatusChange | 1.3.6.1.4.1.25506.8.7.2.0.3 | |||
notification · current When a stack member status change, send a snmp trap to the network management. | ||||
| Shh3chgmpStackMemberTableChange | 1.3.6.1.4.1.25506.8.7.2.1 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Change identifier of the stack member table. | ||||
| Shh3chgmpStackMemberDisconRate | 1.3.6.1.4.1.25506.8.7.2.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Disconnection rate of the stack member switches. | ||||
| Shh3chgmpMainLanswitchFlag | 1.3.6.1.4.1.25506.8.7.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The status of the local switch in the stack.
| ||||
| Shh3chgmpStackIpPoolStartIP | 1.3.6.1.4.1.25506.8.7.2.4 | IpAddress | RW | |
scalar · IpAddress · read-write · current The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. | ||||
| Shh3chgmpStackIpPoolLength | 1.3.6.1.4.1.25506.8.7.2.5 | INTEGER (1..200) | RW | |
scalar · INTEGER (1..200) · read-write · current The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. | ||||
| Thh3chgmpStackMemberTable | 1.3.6.1.4.1.25506.8.7.2.6 | NA | ||
table · not-accessible · current Stack member table. | ||||
| Rhh3chgmpStackMemberEntry | 1.3.6.1.4.1.25506.8.7.2.6.1 | NA | ||
row · not-accessible · current | ||||
| Chh3chgmpStackMemberDeviceId | 1.3.6.1.4.1.25506.8.7.2.6.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string. | ||||
| Chh3chgmpStackMemberSerial | 1.3.6.1.4.1.25506.8.7.2.6.1.2 | Integer32 (0..2047) | RO | |
column · Integer32 (0..2047) · read-only · current When adding a member switch to the stack, the master switch will assign an unique integer to identify it. | ||||
| Chh3chgmpStackMemberIpAddr | 1.3.6.1.4.1.25506.8.7.2.6.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The private member IP address for the communication inside the stack. | ||||
| Chh3chgmpStackMemberName | 1.3.6.1.4.1.25506.8.7.2.6.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Hostname of the member switch. | ||||
| Chh3chgmpStackMemberPassword | 1.3.6.1.4.1.25506.8.7.2.6.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Member password for joining a stack. | ||||
| Chh3chgmpStackMemberPlatform | 1.3.6.1.4.1.25506.8.7.2.6.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. | ||||
| Chh3chgmpStackMemberStatus | 1.3.6.1.4.1.25506.8.7.2.6.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Member status on the master switch, use for displaying the network management status.
| ||||
| Chh3chgmpStackMemberDisconCount | 1.3.6.1.4.1.25506.8.7.2.6.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Count of inside communication disconnection between the member switch and the master switch. | ||||
| Chh3chgmpStackMemberEnrollTime | 1.3.6.1.4.1.25506.8.7.2.6.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current Enrollment time of the member, measured in seconds. | ||||
| Shh3chgmpStackRole | 1.3.6.1.4.1.25506.8.7.2.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current This switch's role status in stack.
| ||||
| Shh3chgmpStackMaxPoolNum | 1.3.6.1.4.1.25506.8.7.2.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Max switch members in one stack that the switch support (include main switch). | ||||
| Shh3chgmpStackMainSwMac | 1.3.6.1.4.1.25506.8.7.2.9 | OCTET STRING (SIZE (0..6)) | RO | |
scalar · OCTET STRING (SIZE (0..6)) · read-only · current The MAC address of main switch. It will be 00.00.00 when not be a member of stack. | ||||
| Shh3chgmpStackIpPoolMask | 1.3.6.1.4.1.25506.8.7.2.10 | IpAddress | RW | |
scalar · IpAddress · read-write · current The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. | ||||
| Nhh3cNTDPObject | 1.3.6.1.4.1.25506.8.7.4 | |||
node · current This MIB contains objects to manage the ntdp operations, which are used on lanswitch products. | ||||
| Shh3chgmpNTDPCollectTopTime | 1.3.6.1.4.1.25506.8.7.4.1 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current Topology collection interval of the administrator switch of the cluster, measured in minutes. | ||||
| Shh3chgmpNTDPHopRange | 1.3.6.1.4.1.25506.8.7.4.2 | Integer32 (1..16) | RW | |
scalar · Integer32 (1..16) · read-write · current Range of the topology collection of the administrator switch | ||||
| Shh3chgmpNTDPRun | 1.3.6.1.4.1.25506.8.7.4.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable/Disable the NTDP function on the switch.
| ||||
| Shh3chgmpNTDPPortDelay | 1.3.6.1.4.1.25506.8.7.4.4 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current Set the delay to forward the topology request via the ports, measured in milliseconds. | ||||
| Shh3chgmpNTDPHopDelay | 1.3.6.1.4.1.25506.8.7.4.5 | Integer32 (1..1000) | RW | |
scalar · Integer32 (1..1000) · read-write · current Set the delay to forward the topology request from every hop, measured in milliseconds. | ||||
| Shh3chgmpNTDPLastTopCollectDuration | 1.3.6.1.4.1.25506.8.7.4.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Duration of the latest overall topology collection, a performance count measured in seconds. | ||||
| Shh3chgmpNTDPCacheChange | 1.3.6.1.4.1.25506.8.7.4.7 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. | ||||
| Shh3chgmpNTDPTOPTableChange | 1.3.6.1.4.1.25506.8.7.4.8 | Integer32 (0..65535) | RO | |
scalar · Integer32 (0..65535) · read-only · current Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. | ||||
| Thh3chgmpNTDPInterfaceTable | 1.3.6.1.4.1.25506.8.7.4.9 | NA | ||
table · not-accessible · current Enable/Disable the NTDP on the switch port. | ||||
| Rhh3chgmpNTDPInterfaceEntry | 1.3.6.1.4.1.25506.8.7.4.9.1 | NA | ||
row · not-accessible · current | ||||
| Chh3chgmpNTDPInterfaceIfIndex | 1.3.6.1.4.1.25506.8.7.4.9.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique identifier an interface of the device. | ||||
| Chh3chgmpNTDPInterfaceEnable | 1.3.6.1.4.1.25506.8.7.4.9.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false.
| ||||
| Thh3chgmpNTDPCacheTable | 1.3.6.1.4.1.25506.8.7.4.10 | NA | ||
table · not-accessible · current Access the information about the switch from the topology table. | ||||
| Rhh3chgmpNTDPCacheEntry | 1.3.6.1.4.1.25506.8.7.4.10.1 | NA | ||
row · not-accessible · current | ||||
| Chh3chgmpNTDPCacheHashIndex | 1.3.6.1.4.1.25506.8.7.4.10.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range. | ||||
| Chh3chgmpNTDPCacheDeviceID | 1.3.6.1.4.1.25506.8.7.4.10.1.2 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. | ||||
| Chh3chgmpNTDPCacheClusterName | 1.3.6.1.4.1.25506.8.7.4.10.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Name of the cluster including the device. | ||||
| Chh3chgmpNTDPCacheClusterRole | 1.3.6.1.4.1.25506.8.7.4.10.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11).
| ||||
| Chh3chgmpNTDPCacheCapabilities | 1.3.6.1.4.1.25506.8.7.4.10.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet. | ||||
| Chh3chgmpNTDPCacheVersion | 1.3.6.1.4.1.25506.8.7.4.10.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet. | ||||
| Chh3chgmpNTDPCachePlatform | 1.3.6.1.4.1.25506.8.7.4.10.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Hardware platform. A null string indicates that the field was not included in the latest NTDP packet. | ||||
| Chh3chgmpNTDPCacheMngVLAN | 1.3.6.1.4.1.25506.8.7.4.10.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The management VLAN ID of the device. | ||||
| Chh3chgmpNTDPCacheHop | 1.3.6.1.4.1.25506.8.7.4.10.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Hops to this switch. | ||||
| Thh3chgmpNTDPTopTable | 1.3.6.1.4.1.25506.8.7.4.11 | NA | ||
table · not-accessible · current Access the topology structure collected by the NTDP. | ||||
| Rhh3chgmpNTDPTopEntry | 1.3.6.1.4.1.25506.8.7.4.11.1 | NA | ||
row · not-accessible · current | ||||
| Chh3chgmpNTDPTopHashIndex | 1.3.6.1.4.1.25506.8.7.4.11.1.1 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range. | ||||
| Chh3chgmpNTDPTopEdgeStartDevID | 1.3.6.1.4.1.25506.8.7.4.11.1.2 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. | ||||
| Chh3chgmpNTDPTopEdgeIndex | 1.3.6.1.4.1.25506.8.7.4.11.1.3 | Integer32 (0..65535) | RO | |
column · Integer32 (0..65535) · read-only · current Edge index of this entry in the data structure. | ||||
| Chh3chgmpNTDPTopEdgeEndDevID | 1.3.6.1.4.1.25506.8.7.4.11.1.4 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. | ||||
| Chh3chgmpNTDPTopEdgeStartPort | 1.3.6.1.4.1.25506.8.7.4.11.1.5 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current The number of the first port of a topology edge. Interface type + card number / slot number / sequence number. | ||||
| Chh3chgmpNTDPTopEdgeStartPortFullDuplex | 1.3.6.1.4.1.25506.8.7.4.11.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The full-duplex status of the first port on a topology edge.
| ||||
| Chh3chgmpNTDPTopEdgeStartPortSpeed | 1.3.6.1.4.1.25506.8.7.4.11.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The speed of the first port on a topology edge. | ||||
| Chh3chgmpNTDPTopEdgeEndPort | 1.3.6.1.4.1.25506.8.7.4.11.1.8 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current The number of the last port of a topology edge. Interface type + card number / slot number / sequence number. | ||||
| Chh3chgmpNTDPTopLinkStatus | 1.3.6.1.4.1.25506.8.7.4.11.1.11 | INTEGER | RO | |
column · INTEGER · read-only · current In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'.
| ||||
| Nhh3cNDPObject | 1.3.6.1.4.1.25506.8.7.5 | |||
node · current This MIB contains objects to manage the ndp operations, which are used on lanswitch products. | ||||
| Shh3cNDPStatus | 1.3.6.1.4.1.25506.8.7.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current NDP protocol module enable flag
| ||||
| Shh3cNDPHelloTimer | 1.3.6.1.4.1.25506.8.7.5.2 | Integer32 (5..254) | RW | |
scalar · Integer32 (5..254) · read-write · current NDP packet transmission interval, measured in seconds. | ||||
| Shh3cNDPAgingTime | 1.3.6.1.4.1.25506.8.7.5.3 | Integer32 (5..255) | RW | |
scalar · Integer32 (5..255) · read-write · current How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds. | ||||
| Shh3cNDPChange | 1.3.6.1.4.1.25506.8.7.5.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Change identifier of the Neighbor table | ||||
| Thh3cNDPPortTable | 1.3.6.1.4.1.25506.8.7.5.5 | NA | ||
table · not-accessible · current Configure to enable/disable the interface NDP of the switch. | ||||
| Rhh3cNDPPortEntry | 1.3.6.1.4.1.25506.8.7.5.5.1 | NA | ||
row · not-accessible · current
| ||||
| Chh3cNDPIfIndex | 1.3.6.1.4.1.25506.8.7.5.5.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique identifier of an interface of the device. | ||||
| Chh3cNDPPortStatus | 1.3.6.1.4.1.25506.8.7.5.5.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false.
| ||||
| Thh3cNDPPortNbTable | 1.3.6.1.4.1.25506.8.7.5.6 | NA | ||
table · not-accessible · current NDP neighbor information on the switch. | ||||
| Rhh3cNDPPortNbEntry | 1.3.6.1.4.1.25506.8.7.5.6.1 | NA | ||
row · not-accessible · current | ||||
| Chh3cNDPPortNbDeviceId | 1.3.6.1.4.1.25506.8.7.5.6.1.1 | OCTET STRING (SIZE (0..10)) | RO | |
column · OCTET STRING (SIZE (0..10)) · read-only · current 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. | ||||
| Chh3cNDPPortNbPortName | 1.3.6.1.4.1.25506.8.7.5.6.1.2 | OCTET STRING (SIZE (0..47)) | RO | |
column · OCTET STRING (SIZE (0..47)) · read-only · current Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number. | ||||
| Chh3cNDPPortNbDeviceName | 1.3.6.1.4.1.25506.8.7.5.6.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Device name. A null string indicates that the field was not included in the latest NDP packet. | ||||
| Chh3cNDPPortNbPortMode | 1.3.6.1.4.1.25506.8.7.5.6.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The neighbor port duplex mode.
| ||||
| Chh3cNDPPortNbProductVer | 1.3.6.1.4.1.25506.8.7.5.6.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Product version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| Chh3cNDPPortNbHardVer | 1.3.6.1.4.1.25506.8.7.5.6.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Hardware version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| Chh3cNDPPortNbBootromVer | 1.3.6.1.4.1.25506.8.7.5.6.1.7 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Bootrom version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| Chh3cNDPPortNbSoftVer | 1.3.6.1.4.1.25506.8.7.5.6.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Software version. A null string indicates that the field was not included in the latest NDP packet. | ||||
| Chh3cNDPPortNbAgingtime | 1.3.6.1.4.1.25506.8.7.5.6.1.9 | Integer32 (5..255) | RO | |
column · Integer32 (5..255) · read-only · current How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds. | ||||
Traps / Notifications
- hh3chgmpMemberRecover
1.3.6.1.4.1.25506.8.7.1.0.2 - hh3chgmpMemberStatusChange
1.3.6.1.4.1.25506.8.7.1.0.3 - hh3chgmpMemberfailure
1.3.6.1.4.1.25506.8.7.1.0.1 - hh3chgmpNetTopChange
1.3.6.1.4.1.25506.8.7.1.0.4 - hh3chgmpStackMemberRecover
1.3.6.1.4.1.25506.8.7.2.0.2 - hh3chgmpStackMemberStatusChange
1.3.6.1.4.1.25506.8.7.2.0.3 - hh3chgmpStackMemberfailure
1.3.6.1.4.1.25506.8.7.2.0.1