HH3C-FLASH-MAN-MIB
H3CThis MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.
snmptranslate -m HH3C-FLASH-MAN-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-FLASH-MAN-MIB <host> 1.3.6.1.4.1.25506.2.5Imports
| ENTITY-MIB | PhysicalIndex |
|---|---|
| HCNUM-TC | CounterBasedGauge64 |
| HH3C-OID-MIB | hh3cCommon |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cFlash | 1.3.6.1.4.1.25506.2.5 | |||
identity This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB. | ||||
| Nhh3cFlashManMIBObjects | 1.3.6.1.4.1.25506.2.5.1 | |||
| Nhh3cFlashDevice | 1.3.6.1.4.1.25506.2.5.1.1 | |||
| Shh3cFlhSupportNum | 1.3.6.1.4.1.25506.2.5.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Specifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash in the system and so the value here will be a minimum of 1. | ||||
| Thh3cFlashTable | 1.3.6.1.4.1.25506.2.5.1.1.2 | NA | ||
table · not-accessible · current This table gives the properties of all the flashes on the system. | ||||
| Rhh3cFlashEntry | 1.3.6.1.4.1.25506.2.5.1.1.2.1 | NA | ||
| Chh3cFlhIndex | 1.3.6.1.4.1.25506.2.5.1.1.2.1.1 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The index of hh3cFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random index + + ( bit 16..31 ) ( bit 0..15 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), it has a minimum value of 1, and maximum value of the same as the value of hh3cFlhSupportNum. From bit16 to bit31 (two bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. | ||||
| Chh3cFlhSize | 1.3.6.1.4.1.25506.2.5.1.1.2.1.2 | Integer32 | RO | deprecated |
column · Integer32 · read-only · deprecated Specifies the total size of the flash indexed by hh3cFlhIndex. The value should be zero if the flash is removed for a removable device. If the total size of the flash exceeds 2,147,483,647 bytes, hh3cFlhHCSize specifies the actual size.
| ||||
| Chh3cFlhPos | 1.3.6.1.4.1.25506.2.5.1.1.2.1.3 | PhysicalIndex | RO | |
column · PhysicalIndex · read-only · current The position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is indicated. | ||||
| Chh3cFlhName | 1.3.6.1.4.1.25506.2.5.1.1.2.1.4 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The flash name within the system. | ||||
| Chh3cFlhChipNum | 1.3.6.1.4.1.25506.2.5.1.1.2.1.5 | Integer32 (1..64) | RO | |
column · Integer32 (1..64) · read-only · current The chip numbers in the flash. | ||||
| Chh3cFlhDescr | 1.3.6.1.4.1.25506.2.5.1.1.2.1.6 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current Description of the purpose of the flash in the system. | ||||
| Chh3cFlhInitTime | 1.3.6.1.4.1.25506.2.5.1.1.2.1.8 | TimeStamp | RO | |
column · TimeStamp · read-only · current The initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable component or a partition, it will be the initialization time. | ||||
| Chh3cFlhRemovable | 1.3.6.1.4.1.25506.2.5.1.1.2.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current The value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed. | ||||
| Chh3cFlhPartitionBool | 1.3.6.1.4.1.25506.2.5.1.1.2.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current The value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned. | ||||
| Chh3cFlhMinPartitionSize | 1.3.6.1.4.1.25506.2.5.1.1.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum partition size supported. If hh3cFlhDevicePartitionBool is false, the value of this object is the same as hh3cFlhSize.
| ||||
| Chh3cFlhMaxPartitions | 1.3.6.1.4.1.25506.2.5.1.1.2.1.13 | Integer32 (1..8) | RO | |
column · Integer32 (1..8) · read-only · current The maximum count of partitions which the system supports for this flash. If hh3cFlhPartitionBool is false, the object value is 1. | ||||
| Chh3cFlhPartitionNum | 1.3.6.1.4.1.25506.2.5.1.1.2.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The actual number of partitions supported by the system for this flash. If hh3cFlhPartitionBool is false, this value is 1. | ||||
| Chh3cFlhKbyteSize | 1.3.6.1.4.1.25506.2.5.1.1.2.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current Specifies the total size of the flash device indexed by hh3cFlhIndex. The value should be zero if the flash is removed for a removable device.
| ||||
| Chh3cFlhHCSize | 1.3.6.1.4.1.25506.2.5.1.1.2.1.16 | CounterBasedGauge64 | RO | |
column · CounterBasedGauge64 · read-only · current Specifies the total size of the flash indexed by hh3cFlhIndex. This node is a 64-bit substitute for hh3cFlhSize.
| ||||
| Nhh3cFlashChips | 1.3.6.1.4.1.25506.2.5.1.1.3 | |||
| Thh3cFlhChipTable | 1.3.6.1.4.1.25506.2.5.1.1.3.1 | NA | ||
table · not-accessible · current Table of properties for all flash chips. Used mainly for diagnostics. | ||||
| Rhh3cFlhChipEntry | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1 | NA | ||
| Chh3cFlhChipSerialNo | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current Index of hh3cFlhChipTable. | ||||
| Chh3cFlhChipID | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.2 | DisplayString (SIZE (0..5)) | RO | |
column · DisplayString (SIZE (0..5)) · read-only · current The manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00. | ||||
| Chh3cFlhChipDescr | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The description of the flash chip. | ||||
| Chh3cFlhChipWriteTimesLimit | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station. | ||||
| Chh3cFlhChipWriteTimes | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current A count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after a write operation, and report any errors accordingly. | ||||
| Chh3cFlhChipEraseTimesLimit | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station. | ||||
| Chh3cFlhChipEraseTimes | 1.3.6.1.4.1.25506.2.5.1.1.3.1.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current A count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after an erase operation, and report any errors accordingly. | ||||
| Nhh3cFlashPartitions | 1.3.6.1.4.1.25506.2.5.1.1.4 | |||
| Thh3cFlhPartitionTable | 1.3.6.1.4.1.25506.2.5.1.1.4.1 | NA | ||
table · not-accessible · current Properties for the flash partitions. Minimum of one entry in this table. | ||||
| Rhh3cFlhPartitionEntry | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1 | NA | ||
row · not-accessible · current An entry of the hh3cFlhPartitionTable.Indexed by flash number and partition number.
| ||||
| Chh3cFlhPartIndex | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.1 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current An index which specifies a sequenced partition in the system. | ||||
| Chh3cFlhPartFirstChip | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.2 | Integer32 (1..64) | RO | |
column · Integer32 (1..64) · read-only · current The first chip's sequence number in the partition, by which a chip can be indexed in chip table. | ||||
| Chh3cFlhPartLastChip | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.3 | Integer32 (1..64) | RO | |
column · Integer32 (1..64) · read-only · current The last chip's sequence number in the partition, by which a chip can be indexed in chip table. | ||||
| Chh3cFlhPartSpace | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.4 | Integer32 | RO | deprecated |
column · Integer32 · read-only · deprecated The total space of the flash partition. The following should be satisfied: hh3cFlhPartSpace = n*hh3cFlhMinPartitionSize If the total size of the flash partition exceeds 2,147,483,647 bytes, hh3cFlhPartHCSpace specifies the actual size.
| ||||
| Chh3cFlhPartSpaceFree | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.5 | Gauge32 | RO | deprecated |
column · Gauge32 · read-only · deprecated The flash partition's free space. If the free space of the flash partition exceeds 2,147,483,647 bytes, hh3cFlhPartHCSpaceFree specifies the actual free space.
| ||||
| Chh3cFlhPartFileNum | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The number of all the files in the flash partition. | ||||
| Chh3cFlhPartChecksumMethod | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The Checksum method which the file system uses.
| ||||
| Chh3cFlhPartStatus | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.8 | Hh3cFlashPartitionStatus | RO | |
column · Hh3cFlashPartitionStatus · read-only · current The flash partition status. | ||||
| Chh3cFlhPartUpgradeMode | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.9 | Hh3cFlashPartitionUpgradeMode | RO | |
column · Hh3cFlashPartitionUpgradeMode · read-only · current The upgrade mode of the Flash partition | ||||
| Chh3cFlhPartName | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.10 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The name of the flash partition given by the system. | ||||
| Chh3cFlhPartRequireErase | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.11 | TruthValue | RO | |
column · TruthValue · read-only · current Shows whether a write operation is conditional on partition erase. | ||||
| Chh3cFlhPartFileNameLen | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.12 | Integer32 (1..256) | RO | |
column · Integer32 (1..256) · read-only · current The maximum length of file name supported in the system. | ||||
| Chh3cFlhPartBootable | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.13 | TruthValue | RO | |
column · TruthValue · read-only · current The value indicates whether the partition is a bootable partition. The true(1) value indicates a bootable partition. | ||||
| Chh3cFlhPartPathForGlobalOpt | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current The value indicates whether the partition is used in a global file operation. The true(1) value indicates that in one global file operation files will be copied to or deleted from this partition. When hh3cFlhPartPathForGlobalOpt in one entry is set to true(1), hh3cFlhPartPathForGlobalOpt in other entries with the same entity index will be set to false(0). | ||||
| Chh3cFlhPartHCSpace | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.15 | CounterBasedGauge64 | RO | |
column · CounterBasedGauge64 · read-only · current The total space of the flash partition. This node is a 64-bit substitute for hh3cFlhPartSpace.
| ||||
| Chh3cFlhPartHCSpaceFree | 1.3.6.1.4.1.25506.2.5.1.1.4.1.1.16 | CounterBasedGauge64 | RO | |
column · CounterBasedGauge64 · read-only · current The flash partition's free space. This node is a 64-bit substitue for hh3cFlhPartSpace.
| ||||
| Nhh3cFlhFiles | 1.3.6.1.4.1.25506.2.5.1.1.4.2 | |||
| Thh3cFlhFileTable | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1 | NA | ||
table · not-accessible · current Table of file information. | ||||
| Rhh3cFlhFileEntry | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1 | NA | ||
row · not-accessible · current An entry representing a file. Indexed using flash number, partition number, and file number. | ||||
| Chh3cFlhFileIndex | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of the table, whose range is from 1 to 2147483647 | ||||
| Chh3cFlhFileName | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.2 | DisplayString (SIZE (1..255)) | RO | |
column · DisplayString (SIZE (1..255)) · read-only · current A valid file/directory name supported by the file system. | ||||
| Chh3cFlhFileSize | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.3 | Integer32 | RO | deprecated |
column · Integer32 · read-only · deprecated The file size in bytes excluding the file header of file system. The value should be greater than zero. If the file size exceeds 2,147,483,647 bytes, hh3cFlhFileHCSize specifies the actual size. | ||||
| Chh3cFlhFileStatus | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file.
| ||||
| Chh3cFlhFileChecksum | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The file checksum in the header of file. | ||||
| Chh3cFlhFileHCSize | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.6 | CounterBasedGauge64 | RO | |
column · CounterBasedGauge64 · read-only · current The file size in bytes. This node is a 64-bit substitue for hh3cFlhFileSize.
| ||||
| Chh3cFlhFileType | 1.3.6.1.4.1.25506.2.5.1.1.4.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current This object indicates whether it is a file or directory.
| ||||
| Nhh3cFlashOperate | 1.3.6.1.4.1.25506.2.5.1.2 | |||
| Thh3cFlhOpTable | 1.3.6.1.4.1.25506.2.5.1.2.1 | NA | ||
table · not-accessible · current Table used to operate flash. | ||||
| Rhh3cFlhOpEntry | 1.3.6.1.4.1.25506.2.5.1.2.1.1 | NA | ||
row · not-accessible · current Note an operation cannot be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly.
| ||||
| Chh3cFlhOperIndex | 1.3.6.1.4.1.25506.2.5.1.2.1.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Specifies the index of an entry. It is a random value when creating an entry. | ||||
| Chh3cFlhOperType | 1.3.6.1.4.1.25506.2.5.1.2.1.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the operation to be executed.
net2FlashWithErase Copy a file to flash; erase flash beforehand.
net2FlashWithoutErase Copy a file to flash; do not erase flash
beforehand.
flash2Net Copy a file from flash.
delete Delete a file that is specified by
hh3cFlhOperSourceFile.
rename Change a file's name.
mkdir Create a directory that is specified by
hh3cFlhOperSourceFile.
rmdir Delete a directory that is specified by
hh3cFlhOperSourceFile.
copy Copy a file.
| ||||
| Chh3cFlhOperProtocol | 1.3.6.1.4.1.25506.2.5.1.2.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Specifies the protocol used to transfer a file. The default protocol is ftp. A directory cannot be transferred. when 'clusterftp' or 'clustertftp' is selected, the hh3cFlhOperServerAddress needn't be set, the server address can be acquired automatically, the value of hh3cFlhOperServerAddress is uncertain during operation. Both member switch and commander switch can use them if they support HGMP v2.
| ||||
| Chh3cFlhOperServerAddress | 1.3.6.1.4.1.25506.2.5.1.2.1.1.4 | IpAddress | RC | deprecated |
column · IpAddress · read-create · deprecated The address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by hh3cFlhOperSrvAddrRev for it only support IPv4. | ||||
| Chh3cFlhOperServerUser | 1.3.6.1.4.1.25506.2.5.1.2.1.1.5 | DisplayString | RC | |
column · DisplayString · read-create · current When using ftp to transfer files, the user name must be specified through this node. | ||||
| Chh3cFlhOperPassword | 1.3.6.1.4.1.25506.2.5.1.2.1.1.6 | DisplayString | RC | |
column · DisplayString · read-create · current Remote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp. | ||||
| Chh3cFlhOperSourceFile | 1.3.6.1.4.1.25506.2.5.1.2.1.1.7 | DisplayString (SIZE (1..255)) | RC | |
column · DisplayString (SIZE (1..255)) · read-create · current Specifies the source file/directory name for this operation that is specified by hh3cFlhOperType. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified. | ||||
| Chh3cFlhOperDestinationFile | 1.3.6.1.4.1.25506.2.5.1.2.1.1.8 | DisplayString | RC | |
column · DisplayString · read-create · current Specifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application. | ||||
| Chh3cFlhOperStatus | 1.3.6.1.4.1.25506.2.5.1.2.1.1.9 | Hh3cFlashOperationStatus | RO | |
column · Hh3cFlashOperationStatus · read-only · current The status of operation. | ||||
| Chh3cFlhOperEndNotification | 1.3.6.1.4.1.25506.2.5.1.2.1.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current If the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated. | ||||
| Chh3cFlhOperProgress | 1.3.6.1.4.1.25506.2.5.1.2.1.1.11 | TimeTicks | RO | |
column · TimeTicks · read-only · current The progress described as the time taken for the operation. | ||||
| Chh3cFlhOperRowStatus | 1.3.6.1.4.1.25506.2.5.1.2.1.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current The row status of this table entry. | ||||
| Chh3cFlhOperServerPort | 1.3.6.1.4.1.25506.2.5.1.2.1.1.13 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current The port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port. | ||||
| Chh3cFlhOperFailReason | 1.3.6.1.4.1.25506.2.5.1.2.1.1.14 | DisplayString | RO | |
column · DisplayString · read-only · current The failure reasons of operation. | ||||
| Chh3cFlhOperSrvAddrType | 1.3.6.1.4.1.25506.2.5.1.2.1.1.15 | InetAddressType | RC | |
column · InetAddressType · read-create · current The type of IP address for hh3cFlhOperSrvAddrRev. | ||||
| Chh3cFlhOperSrvAddrRev | 1.3.6.1.4.1.25506.2.5.1.2.1.1.16 | InetAddress | RC | |
column · InetAddress · read-create · current The address of remote host acting as server for operation. | ||||
| Chh3cFlhOperSrvVPNName | 1.3.6.1.4.1.25506.2.5.1.2.1.1.17 | DisplayString | RC | |
column · DisplayString · read-create · current The VPN instance of this operation uses. | ||||
| Nhh3cFlashNotification | 1.3.6.1.4.1.25506.2.5.1.3 | |||
| !hh3cFlhOperNotification | 1.3.6.1.4.1.25506.2.5.1.3.1 | |||
notification · current A hh3cFlhOperNotification is sent at the completion of a flash copy operation if hh3cFlhOperEndNotification is true.
| ||||
| Nhh3cFlashTrapV2 | 1.3.6.1.4.1.25506.2.5.1.4 | |||
| Nhh3cFlashTrapV2Prefix | 1.3.6.1.4.1.25506.2.5.1.4.0 | |||
| !hh3cFlhUsageOverThreshold | 1.3.6.1.4.1.25506.2.5.1.4.0.1 | |||
notification · current The disk usage exceeded the threshold. | ||||
| !hh3cFlhUsageResume | 1.3.6.1.4.1.25506.2.5.1.4.0.2 | |||
notification · current The disk usage dropped below the threshold. | ||||
| !hh3cFlhStateFailure | 1.3.6.1.4.1.25506.2.5.1.4.0.3 | |||
notification · current The filesystem state is failure. | ||||
| !hh3cFlhStateResume | 1.3.6.1.4.1.25506.2.5.1.4.0.4 | |||
notification · current The filesystem state is resume. | ||||
| Nhh3cFlashTrapInfor | 1.3.6.1.4.1.25506.2.5.1.5 | |||
| Shh3cFlhUsageRate | 1.3.6.1.4.1.25506.2.5.1.5.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Disk usage | ||||
| Shh3cFlhUsageRateThreshold | 1.3.6.1.4.1.25506.2.5.1.5.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Disk usage threshold | ||||
| Shh3cFlhNameForTrap | 1.3.6.1.4.1.25506.2.5.1.5.3 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current Disk name. | ||||
| Shh3cFlhStateSrcChassis | 1.3.6.1.4.1.25506.2.5.1.5.4 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Src chassis | ||||
| Shh3cFlhStateSrcSlot | 1.3.6.1.4.1.25506.2.5.1.5.5 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Src slot | ||||
| Shh3cFlhStateSrcCpu | 1.3.6.1.4.1.25506.2.5.1.5.6 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Src cpu | ||||
| Shh3cFlhStateDestChassis | 1.3.6.1.4.1.25506.2.5.1.5.7 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Dest chassis | ||||
| Shh3cFlhStateDestSlot | 1.3.6.1.4.1.25506.2.5.1.5.8 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Dest slot | ||||
| Shh3cFlhStateDestCpu | 1.3.6.1.4.1.25506.2.5.1.5.9 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Dest cpu | ||||
| Nhh3cFlashMIBConformance | 1.3.6.1.4.1.25506.2.5.2 | |||
| Nhh3cFlhMIBCompliances | 1.3.6.1.4.1.25506.2.5.2.1 | |||
| Mhh3cFlhMIBCompliance | 1.3.6.1.4.1.25506.2.5.2.1.1 | |||
compliance · current The statement of compliance for those implementing this MIB. | ||||
| Nhh3cFlashMIBGroups | 1.3.6.1.4.1.25506.2.5.2.2 | |||
| Ghh3cFlhGroup | 1.3.6.1.4.1.25506.2.5.2.2.1 | |||
group · current A collection of objects on Flash level information. | ||||
| Ghh3cFlhChipGroup | 1.3.6.1.4.1.25506.2.5.2.2.3 | |||
group · current A collection of objects on chip level information. | ||||
| Ghh3cFlhPartitionGroup | 1.3.6.1.4.1.25506.2.5.2.2.4 | |||
group · current A collection of objects providing on partition level information. | ||||
| Ghh3cFlhFileGroup | 1.3.6.1.4.1.25506.2.5.2.2.5 | |||
group · current A collection of objects on file level information. | ||||
| Ghh3cFlhOperationGroup | 1.3.6.1.4.1.25506.2.5.2.2.6 | |||
group · current A collection of objects of flash operations.
| ||||
| Ghh3cFlhNotificationGroup | 1.3.6.1.4.1.25506.2.5.2.2.7 | |||
Textual conventions
Hh3cFlashOperationStatusINTEGERopAuthFail(17)opCopyToSlaveFailure(31)opDeleteDeviceBusy(25)opDeleteFileFailedInSlave(29)opDeleteFileNotExistInSlave(28)opDeleteFileOpenError(20)opDeleteInvalidDevice(21)opDeleteInvalidFileName(24)opDeleteInvalidFunction(22)opDeleteInvalidPath(27)opDeleteOperationError(23)opDeleteParaError(26)opDeviceBusy(8)opDeviceError(10)opDeviceFull(12)opDeviceNotProgrammable(11)opDeviceOpenError(9)opFileChecksumError(15)opFileOpenError(13)opFileTransferError(14)opInProgress(1)opInvalid(3)opInvalidDestName(6)opInvalidProtocol(4)opInvalidServerAddress(7)opInvalidSourceName(5)opNoMemory(16)opSlaveFull(30)opSuccess(2)opTimeout(18)opUnknownFailure(19)The status of the specified operation can be one of the following. opInProgress : The operation is in process. opSuccess : The operation has been completed successfully. opInvalid : The command is invalid or command-protocol-device combination is unsupported by the system. opInvalidProtocol : Invalid protocol is specified. opInvalidSourceName : Invalid source name is specified. opInvalidDestName : Invalid target name is specified. opInvalidServerAddress : Invalid server address is specified. opDeviceBusy : The device is in use and locked by another process. opDeviceOpenError : Invalid device name is specified. opDeviceError : Device read, write or erase error. opDeviceNotProgrammable : Device is read-only but a write or erase operation was specified. opDeviceFull : Device is filled to capacity. opFileOpenError : Invalid file/directory name, file/directory not found in partition. opFileTransferError : File transfer was unsuccessful. opFileChecksumError : File checksum in Flash is invalid. opNoMemory : System is running in low on memory. opUnknownFailure : Failure which is unknown. opDeleteFileOpenError : File/Directory is in used by another process. opDeleteInvalidDevice : Invalid device name is specified. opDeleteInvalidFunction : Deleted operation is unsupported by the device. opDeleteOperationError : Operation is in a low error. opDeleteInvalidFileName : Invalid name is specified. opDeleteDeviceBusy : The device is in use and locked by another process. opDeleteParaError : The parameters are invalid. opDeleteInvalidPath : The path is invalid. opDeleteFileNotExistInSlave : Failed to delete file, because the file does not exist in the slave. opDeleteFileFailedInSlave : Operation failed when deleting file in the slave. opSlaveFull : Operation failed because the slave doesn't have enough space. opCopyToSlaveFailure : Operation failed when copying file to the slave.Hh3cFlashPartitionStatusINTEGERreadOnly(1)readWrite(3)runFromFlash(2)If device is not programmable the value of it will be 'readOnly'; If the current image is running from this partition the value of it will be 'runFromFlash' If device is programmable the value of it will be 'readWrite'.
Hh3cFlashPartitionUpgradeModeINTEGERdirect(3)rxbootFLH(2)unknown(1)Flash partition upgrade method, i.e., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on run-from-Flash systems for upgrading Flash. This feature uses the bootstrap code in ROMs to help in automatic download. This object should be retrieved if the partition status is runFromFlash(2). If the partition status is readOnly(1), the upgrade method would depend on the reason for the readOnly status. For example, it may simply be a matter of installing the programming jumper, or it may require execution of a later version of software that supports the Flash chips. unknown - the current system image does not know how Flash can be programmed. A possible method would be to reload the ROM image and perform the upgrade manually. rxbootFLH - the Flash Load Helper is available to download files to Flash. A copy-to-flash command can be used and this system image will automatically reload the Rxboot image in ROM and direct it to carry out the download request. direct - will be done directly by this image.
Traps / Notifications
- hh3cFlhOperNotification
1.3.6.1.4.1.25506.2.5.1.3.1 - hh3cFlhStateFailure
1.3.6.1.4.1.25506.2.5.1.4.0.3 - hh3cFlhStateResume
1.3.6.1.4.1.25506.2.5.1.4.0.4 - hh3cFlhUsageOverThreshold
1.3.6.1.4.1.25506.2.5.1.4.0.1 - hh3cFlhUsageResume
1.3.6.1.4.1.25506.2.5.1.4.0.2