HH3C-EPON-UNI-MIB
H3CThe objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit).
snmptranslate -m HH3C-EPON-UNI-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-EPON-UNI-MIB <host> 1.3.6.1.4.1.25506.2.42.5Imports
| HH3C-OID-MIB | hh3cEpon |
|---|---|
| IF-MIB | ifDescr, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cEponUni | 1.3.6.1.4.1.25506.2.42.5 | |||
identity The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit). | ||||
| Nhh3cEponUniSysMan | 1.3.6.1.4.1.25506.2.42.5.1 | |||
| Thh3cEponUniSysManTable | 1.3.6.1.4.1.25506.2.42.5.1.1 | NA | ||
table · not-accessible · current This table defines several UNI system parameters. | ||||
| Rhh3cEponUniSysManEntry | 1.3.6.1.4.1.25506.2.42.5.1.1.1 | NA | ||
| Chh3cEponUniIndex | 1.3.6.1.4.1.25506.2.42.5.1.1.1.1 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current The index value which uniquely identifies the FE(fast Ethernet) interface of the ONU. | ||||
| Chh3cEponUniDescr | 1.3.6.1.4.1.25506.2.42.5.1.1.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software. | ||||
| Chh3cEponUniAdminStatus | 1.3.6.1.4.1.25506.2.42.5.1.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down(2) state. The testing(3)state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hh3cEponUniAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).
| ||||
| Chh3cEponUniMdi | 1.3.6.1.4.1.25506.2.42.5.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
| ||||
| Chh3cEponUniPriority | 1.3.6.1.4.1.25506.2.42.5.1.1.1.5 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current The priority of user network interface. If the value is larger, the priority will be higher. | ||||
| Chh3cEponUniVlanType | 1.3.6.1.4.1.25506.2.42.5.1.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current UNI vlan types.
| ||||
| Chh3cEponUniAccessVlan | 1.3.6.1.4.1.25506.2.42.5.1.1.1.7 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current The vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface. | ||||
| Chh3cEponUniTrunkPvid | 1.3.6.1.4.1.25506.2.42.5.1.1.1.8 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current PVID(port vlan ID), the vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface. | ||||
| Chh3cEponUniVLANTrunkAllowListLow | 1.3.6.1.4.1.25506.2.42.5.1.1.1.9 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of VLANs. The vlan is not allowed if its bit has a value of '0'. | ||||
| Chh3cEponUniVLANTrunkAllowListHigh | 1.3.6.1.4.1.25506.2.42.5.1.1.1.10 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered vlan, and the least significant bit represents the lowest numbered vlan. Thus, each allowed vlan of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is allowed in the set of VLANs. The vlan is not allowed if its bit has a value of '0'. | ||||
| Chh3cEponUniInboundLineRate | 1.3.6.1.4.1.25506.2.42.5.1.1.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current The value of the inbound line-rate. measured with kbps. The upper limit of the line-rate is the value of hh3cEponUniLineRateMax in the entry. It must be multiple of the value of hh3cEponUniLineRateStep. The default value of hh3cEponUniLineRate is the value of hh3cEponUniLineRateMax. | ||||
| Chh3cEponUniOutboundLineRate | 1.3.6.1.4.1.25506.2.42.5.1.1.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current The value of the outbound line-rate. measured with kbps. The upper limit of the line-rate is the value of hh3cEponUniLineRateMax in the entry. It must be multiple of the value of hh3cEponUniLineRateStep. The default value of hh3cEponUniLineRate is the value of hh3cEponUniLineRateMax. | ||||
| Chh3cEponUniFlowControl | 1.3.6.1.4.1.25506.2.42.5.1.1.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable. | ||||
| Chh3cEponUniSpeed | 1.3.6.1.4.1.25506.2.42.5.1.1.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current User network interface speed.
| ||||
| Chh3cEponUniDuplex | 1.3.6.1.4.1.25506.2.42.5.1.1.1.15 | INTEGER | RW | |
column · INTEGER · read-write · current User network interface mode.
| ||||
| Chh3cEponUniVlanVPNStatus | 1.3.6.1.4.1.25506.2.42.5.1.1.1.16 | TruthValue | RW | |
column · TruthValue · read-write · current vlan VPN status. true(1) - vlan VPN status enable. false(2) - vlan VPN disable. | ||||
| Chh3cEponUniCountReset | 1.3.6.1.4.1.25506.2.42.5.1.1.1.17 | INTEGER | RW | |
column · INTEGER · read-write · current Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
| ||||
| Chh3cEponUniPortIsolate | 1.3.6.1.4.1.25506.2.42.5.1.1.1.18 | INTEGER | RW | |
column · INTEGER · read-write · current enable - enable UNI port isolate setting. disable - disable UNI port isolate setting.
| ||||
| Chh3cEponUniVlanConfiguration | 1.3.6.1.4.1.25506.2.42.5.1.1.1.23 | OCTET STRING (SIZE (0..255)) | RW | |
column · OCTET STRING (SIZE (0..255)) · read-write · current The vlan configuration of the related vlan mode. Transparent vlan mode: hh3cEponUniVlanConfiguration is a zero length string. Tag vlan mode: the first four octets were the tag assigned to untagged frames received on UNI, including TPID, VID, CFI and priority. Translation vlan mode: the first four octets were the old tag (including TPID, VID, CFI and priority), which is replaced by the new tag(including TPID, VID, CFI and priority), the second four octets. Doubletagged vlan mode: the first four octets were the tag assigned to untagged or tagged frames received on UNI, including TPID, VID, CFI and priority. Vlantrunk vlan mode: the first four octets were the old tag (including TPID, VID, CFI and priority), which is replaced by the new tag(including TPID, VID, CFI and priority) of the second four octets, the frames which assigned tag ranges from the third four octets to fourth four octets were transmited freely and so on for following octets. Aggregation vlan mode: the first four octets were the old tag (including TPID, VID, CFI and priority), which is replaced by the new tag(including TPID, VID, CFI and priority) of the second four octets, the frames which assigned tag ranges from the third four octets to fourth four octets(using low two octets as vlan tag) were replaced by the new tag(using high two octets as target vlan tag) and so on for following octets. | ||||
| Chh3cEponUniAutoNegotiation | 1.3.6.1.4.1.25506.2.42.5.1.1.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current enable - enable auto negotiation. disable - disable auto negotiation.
| ||||
| Chh3cEponUniRestartAutoNeg | 1.3.6.1.4.1.25506.2.42.5.1.1.1.26 | INTEGER | RW | |
column · INTEGER · read-write · current Force to restart the auto negotiation process.
| ||||
| Chh3cEponUniLinkStatus | 1.3.6.1.4.1.25506.2.42.5.1.1.1.29 | INTEGER | RO | |
column · INTEGER · read-only · current The link status of UNI.
| ||||
| Chh3cEponUniInterfaceType | 1.3.6.1.4.1.25506.2.42.5.1.1.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current UNI interface type.
| ||||
| Chh3cEponUniVitualCableTest | 1.3.6.1.4.1.25506.2.42.5.1.1.1.31 | INTEGER | RW | |
column · INTEGER · read-write · current True(1): Virtual cable test enable. False(2): Virtual cable test disable.
| ||||
| Chh3cEponUniVCTCableStatus | 1.3.6.1.4.1.25506.2.42.5.1.1.1.32 | INTEGER | RO | |
column · INTEGER · read-only · current Get the cable status. Normal(1),cable is normal. Abnormal(2),cable is abnormal. AbnormalOpen(3),cable is abnormal because of open circuit. AbnormalShort(4),cable is abnormal because of short circuit. Failure(5),cable is abnormal because of testing failure.
| ||||
| Chh3cEponUniVCTCableLength | 1.3.6.1.4.1.25506.2.42.5.1.1.1.33 | Integer32 | RO | |
column · Integer32 · read-only · current Get the cable length. When hh3cEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When hh3cEponUniVCTCableStatus is abnormal, it stands for the length from the UNI port to the failure place. Unit:meter(m). | ||||
| Chh3cEponUniVCTImpedanceMismatch | 1.3.6.1.4.1.25506.2.42.5.1.1.1.34 | INTEGER | RO | |
column · INTEGER · read-only · current Get the cable impedance. Not-support(1),the UNI port does not support this function. True(2),impedance match. False(3),impedance mismatch.
| ||||
| Chh3cEponUniVCTPairSkew | 1.3.6.1.4.1.25506.2.42.5.1.1.1.35 | Integer32 | RO | |
column · Integer32 · read-only · current Get the symmetry of cable. If the function is not supported, the default value 0 will be returned. Unit:nanosecond(ns). | ||||
| Chh3cEponUniVCTPairSwap | 1.3.6.1.4.1.25506.2.42.5.1.1.1.36 | INTEGER | RO | |
column · INTEGER · read-only · current NotSupport(1),the UNI port does not support this function. True(2),pair swap. False(3),not pair swap.
| ||||
| Chh3cEponUniVCTPolaritySwap | 1.3.6.1.4.1.25506.2.42.5.1.1.1.37 | INTEGER | RO | |
column · INTEGER · read-only · current NotSupport(1),the UNI port does not support this function. True(2),polarity swap. False(3),not polarity swap.
| ||||
| Chh3cEponUniVCTInsertionLoss | 1.3.6.1.4.1.25506.2.42.5.1.1.1.38 | Integer32 | RO | |
column · Integer32 · read-only · current If the function is not supported, the default value 0 will be returned. Unit:decibel(db). | ||||
| Chh3cEponUniVCTReturnLoss | 1.3.6.1.4.1.25506.2.42.5.1.1.1.39 | Integer32 | RO | |
column · Integer32 · read-only · current If the function is not supported, the default value 0 will be returned. Unit:decibel(db). | ||||
| Chh3cEponUniVCTNearendCrosstalk | 1.3.6.1.4.1.25506.2.42.5.1.1.1.40 | Integer32 | RO | |
column · Integer32 · read-only · current If the function is not supported, the default value 0 will be returned. Unit:decibel(db). | ||||
| Chh3cEponUniVlan | 1.3.6.1.4.1.25506.2.42.5.1.1.1.41 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current If the function is not supported, the default value 0 will be returned. Unit:decibel(db). | ||||
| Chh3cEponUniMacMax | 1.3.6.1.4.1.25506.2.42.5.1.1.1.42 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum number of MAC addresses that the UNI port can learn. no-limit(65535) others(0~65534) | ||||
| Thh3cEponUniCountTable | 1.3.6.1.4.1.25506.2.42.5.1.2 | NA | ||
table · not-accessible · current A list of interface counter about frames entries. | ||||
| Rhh3cEponUniCountEntry | 1.3.6.1.4.1.25506.2.42.5.1.2.1 | NA | ||
row · not-accessible · current An entry containing management information applicable to a particular interface.
| ||||
| Chh3cEponUniInStatsPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of frames (including bad frames, broadcast frames, and multicast frames) received. | ||||
| Chh3cEponUniInStatsUnicastPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of good frames received that are directed to the unicast address. Note that this does not include multicast and broadcast frames. | ||||
| Chh3cEponUniInStatsBroadcastPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of good frames received that are directed to the broadcast address. Note that this does not include multicast frames. | ||||
| Chh3cEponUniInStatsMulticastPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of good frames received that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address. | ||||
| Chh3cEponUniInPausePkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current A count of MAC Control frames received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system. | ||||
| Chh3cEponUniInTotalErrors | 1.3.6.1.4.1.25506.2.42.5.1.2.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Total count of the error frames received on this interface. | ||||
| Chh3cEponUniInStatsCRCAlignErrors | 1.3.6.1.4.1.25506.2.42.5.1.2.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). | ||||
| Chh3cEponUniInStatsUndersizePkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of frames received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed. | ||||
| Chh3cEponUniInStatsOversizePkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of frames received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed. | ||||
| Chh3cEponUniInErrorbyOther | 1.3.6.1.4.1.25506.2.42.5.1.2.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of error frames received on this interface. | ||||
| Chh3cEponUniOutStatsPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of frames (including bad frames, broadcast frames, and multicast frames) sent. | ||||
| Chh3cEponUniOutStatsUnicastPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of good frames sent that are directed to the unicast address. Note that this does not include multicast and broadcast frames. | ||||
| Chh3cEponUniOutStatsBroadcastPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of good frames sent that are directed to the broadcast address. Note that this does not include multicast frames. | ||||
| Chh3cEponUniOutStatsMulticastPkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of good frames sent that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address. | ||||
| Chh3cEponUniOutStatsPausePkts | 1.3.6.1.4.1.25506.2.42.5.1.2.1.15 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of MAC control frames sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system. | ||||
| Chh3cEponUniOutTotalErrors | 1.3.6.1.4.1.25506.2.42.5.1.2.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of error frames sent on this interface. | ||||
| Chh3cEponUniOutStatsCollisions | 1.3.6.1.4.1.25506.2.42.5.1.2.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected. | ||||
| Chh3cEponUniOutDelayExceededDiscards | 1.3.6.1.4.1.25506.2.42.5.1.2.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. | ||||
| Chh3cEponUniOutErrorbyOther | 1.3.6.1.4.1.25506.2.42.5.1.2.1.19 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of other error frames sent on this interface. Other error frames means the error frames out of collision frames and excessive delayed frames. | ||||
| Chh3cEponUniOutDroppedFrames | 1.3.6.1.4.1.25506.2.42.5.1.2.1.20 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The total number of frames dropped because of buffer failure. | ||||
| Thh3cEponUniIgmpInfoTable | 1.3.6.1.4.1.25506.2.42.5.1.3 | NA | ||
table · not-accessible · current This table stores igmp information of UNI interface. | ||||
| Rhh3cEponUniIgmpInfoEntry | 1.3.6.1.4.1.25506.2.42.5.1.3.1 | NA | ||
row · not-accessible · current The entry of hh3cEponUniIgmpInfoTable. | ||||
| Chh3cEponUniMacIndex | 1.3.6.1.4.1.25506.2.42.5.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index uniquely identifies the igmp information in current UNI interface. | ||||
| Chh3cEponUniIgmpMacAddress | 1.3.6.1.4.1.25506.2.42.5.1.3.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current A 6-octet read-only value carrying the individual MAC address indicates which igmp group the UNI interface belonging to. | ||||
| Chh3cEponUniIgmpVlanId | 1.3.6.1.4.1.25506.2.42.5.1.3.1.3 | Integer32 (1..4094) | RO | |
column · Integer32 (1..4094) · read-only · current An integer range from 1 to 4094 indicates the vlan which the igmp Mac address has joined in. | ||||
| Nhh3cEponUniParaMan | 1.3.6.1.4.1.25506.2.42.5.1.4 | |||
| Shh3cEponUniLineRateMax | 1.3.6.1.4.1.25506.2.42.5.1.4.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The maximum value of the line-rate(kbps) that user network interface can be set. | ||||
| Shh3cEponUniLineRateStep | 1.3.6.1.4.1.25506.2.42.5.1.4.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The step of line-rate(kbps). | ||||
| Shh3cEponUniNumberOnOnu | 1.3.6.1.4.1.25506.2.42.5.1.4.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The user network interface number on ONU. | ||||
| Nhh3cEponUniScalarGroup | 1.3.6.1.4.1.25506.2.42.5.1.5 | |||
| Thh3cEponUniPortPolicyTable | 1.3.6.1.4.1.25506.2.42.5.1.6 | NA | ||
table · not-accessible · current UNI port policy configuration. | ||||
| Rhh3cEponUniPortPolicyEntry | 1.3.6.1.4.1.25506.2.42.5.1.6.1 | NA | ||
row · not-accessible · current The entry of hh3cEponUniPortPolicyTable.
| ||||
| Chh3cEponUniPortPolicyStatus | 1.3.6.1.4.1.25506.2.42.5.1.6.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current enable - enable UNI upstream port policing. disable - disable UNI upstream port policing.
| ||||
| Chh3cEponUniPortPolicyCir | 1.3.6.1.4.1.25506.2.42.5.1.6.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The committed information rate, ranging from 1 to 102400, measured in kbps. | ||||
| Chh3cEponUniPortPolicyBucketDepth | 1.3.6.1.4.1.25506.2.42.5.1.6.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes. | ||||
| Chh3cEponUniPortPolicyExtraBurst | 1.3.6.1.4.1.25506.2.42.5.1.6.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes. | ||||
| Chh3cEponUniPortPolicyInboundCir | 1.3.6.1.4.1.25506.2.42.5.1.6.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The inbound committed information rate, measured in kbps. | ||||
| Chh3cEponUniPortPolicyInboundBucketDepth | 1.3.6.1.4.1.25506.2.42.5.1.6.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The inbound depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes. | ||||
| Chh3cEponUniPortPolicyInboundExtraBurst | 1.3.6.1.4.1.25506.2.42.5.1.6.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current The inbound extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes. | ||||
| Chh3cEponUniPortPolicyOutboundCir | 1.3.6.1.4.1.25506.2.42.5.1.6.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The outbound committed information rate, stepped by 64, measured in kbps. | ||||
| Chh3cEponUniPortPolicyOutboundPir | 1.3.6.1.4.1.25506.2.42.5.1.6.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current The outbound peak information rate, stepped by 64, measured in kbps. | ||||
| Thh3cEponUniMulticastTable | 1.3.6.1.4.1.25506.2.42.5.1.7 | NA | ||
table · not-accessible · current UNI multicast configuration. | ||||
| Rhh3cEponUniMulticastEntry | 1.3.6.1.4.1.25506.2.42.5.1.7.1 | NA | ||
row · not-accessible · current The entry of hh3cEponUniPortPolicyTable.
| ||||
| Chh3cEponUniMulticastGroupNumber | 1.3.6.1.4.1.25506.2.42.5.1.7.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current The allowed multicast group number that can be handled at the same time by UNI. | ||||
| Chh3cEponUniMulticastVlanList | 1.3.6.1.4.1.25506.2.42.5.1.7.1.2 | OCTET STRING (SIZE (0..255)) | RW | |
column · OCTET STRING (SIZE (0..255)) · read-write · current The multicast vlan list. The first two octets of the string represent the first VLAN ID; the second two octets of the string represent the second VLAN ID, and so on. It is a zero length string by default. | ||||
| Chh3cEponUniMulticastStripStatus | 1.3.6.1.4.1.25506.2.42.5.1.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current true - strip the vlan tag of multicast packet. false - does not strip the vlan tag of multicast packet.
| ||||
| Chh3cEponUniMulticastFastleave | 1.3.6.1.4.1.25506.2.42.5.1.7.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - fast leave of IGMP enable on ONU. false(2) - fast leave of IGMP disable on ONU. | ||||
| Thh3cEponUniTechAbilityTable | 1.3.6.1.4.1.25506.2.42.5.1.8 | NA | ||
table · not-accessible · current UNI multicast configuration. | ||||
| Rhh3cEponUniTechAbilityEntry | 1.3.6.1.4.1.25506.2.42.5.1.8.1 | NA | ||
row · not-accessible · current The entry of hh3cEponUniTechAbilityTable.
| ||||
| Chh3cEponUniLocalTechAbility | 1.3.6.1.4.1.25506.2.42.5.1.8.1.1 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current The local port capabilities of the UNI. Each two octets stand for a capability of UNI: the first two octets represent one capability and the second two octets represent another capability, and so on. The capabilities list: 1 - undefined, 2 - initializing, true ability not yet known, 14 - 10BASE-T, 142 - full duplex 10BASE-T, 23 - 100BASE-T4, 25 - 100BASE-TX, 252 - full duplex 100BASE-TX, 312 - PAUSE operation for full duplex links, 313 - asymmetric PAUSE operation for full duplex links, 314 - symmetric PAUSE operation for full duplex links, 32 - 100BASE-T2, 322 - full duplex 100BASE-T2, 36 - 1000BASE-X, 362 - full duplex 1000BASE-X, 40 - 1000BASE-T UTP PHY, 402 - full duplex 1000BASE-T UTP PHY, 37 - remote fault bit 1(RF1), 372 - remote fault bit 2(RF2), 8029 - 802.9ISLAN-16T. | ||||
| Chh3cEponUniAdvertisedTechAbility | 1.3.6.1.4.1.25506.2.42.5.1.8.1.2 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current The advertised port capabilities of the UNI. The capabilities list references the description of hh3cEponUniLocalTechAbility. | ||||
| Thh3cEponUniMulticastControlTable | 1.3.6.1.4.1.25506.2.42.5.1.9 | NA | ||
table · not-accessible · current UNI multicast control parameters. | ||||
| Rhh3cEponUniMulticastControlEntry | 1.3.6.1.4.1.25506.2.42.5.1.9.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponUniMulticastControlTable. | ||||
| Chh3cEponUniMulticastVlanIndex | 1.3.6.1.4.1.25506.2.42.5.1.9.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The multicast vlan ID. | ||||
| Chh3cEponUniMulticastAddressList | 1.3.6.1.4.1.25506.2.42.5.1.9.1.2 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like. | ||||
| Chh3cEponUniMulticastAccessRule | 1.3.6.1.4.1.25506.2.42.5.1.9.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current deny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions.
| ||||
| Chh3cEponUniMulticastChannelLimit | 1.3.6.1.4.1.25506.2.42.5.1.9.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current The limitation of multicast preview channel number. | ||||
| Chh3cEponUniMulticastPreTimeSlice | 1.3.6.1.4.1.25506.2.42.5.1.9.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current The time slice of multicast preview. | ||||
| Chh3cEponUniMulticastPreTimes | 1.3.6.1.4.1.25506.2.42.5.1.9.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The number of multicast preview times. | ||||
| Chh3cEponUniMulticastPreInterval | 1.3.6.1.4.1.25506.2.42.5.1.9.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current The interval between two consecutive previews, measured in minute. | ||||
| Chh3cEponUniMulticastRowStatus | 1.3.6.1.4.1.25506.2.42.5.1.9.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. The active, createAndGo and the destory statuses are supported. | ||||
| Chh3cEponUniMulticastIndex | 1.3.6.1.4.1.25506.2.42.5.1.9.1.9 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of the entry. | ||||
| Chh3cEponUniMulticastSourceIpList | 1.3.6.1.4.1.25506.2.42.5.1.9.1.10 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current This list contains many source ip addresses. Each ip address is contained in four octets. | ||||
| Chh3cEponUniMulticastResetInterval | 1.3.6.1.4.1.25506.2.42.5.1.9.1.11 | Integer32 | RC | |
column · Integer32 · read-create · current The interval is measured in minute. From the last preview limitation is reached, a customer can preview again after this interval is expired. | ||||
| Thh3cEponUniQosIndexNextTable | 1.3.6.1.4.1.25506.2.42.5.1.10 | NA | ||
table · not-accessible · current The next index table. | ||||
| Rhh3cEponUniQosIndexNextEntry | 1.3.6.1.4.1.25506.2.42.5.1.10.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponUniQosIndexNextTable.
| ||||
| Chh3cEponUniQosConfIndexNext | 1.3.6.1.4.1.25506.2.42.5.1.10.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object contains an appropriate value to be used for hh3cEponUniQosConfIndex when creating rows in the hh3cEponUniQosConfTable. | ||||
| Thh3cEponUniQosConfTable | 1.3.6.1.4.1.25506.2.42.5.1.11 | NA | ||
table · not-accessible · current UNI Qos configuration. | ||||
| Rhh3cEponUniQosConfEntry | 1.3.6.1.4.1.25506.2.42.5.1.11.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponUniQosConfTable. | ||||
| Chh3cEponUniQosConfIndex | 1.3.6.1.4.1.25506.2.42.5.1.11.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The rule index. | ||||
| Chh3cEponUniQosConfRuleIndexNext | 1.3.6.1.4.1.25506.2.42.5.1.11.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current This object contains an appropriate value to be used for hh3cEponUniQosRuleIndex when creating rows in the hh3cEponUniQosRuleTable. | ||||
| Chh3cEponUniQosConfMappedQueue | 1.3.6.1.4.1.25506.2.42.5.1.11.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The queue that the ethernet frames will be mapped. | ||||
| Chh3cEponUniQosConfMarkedPriority | 1.3.6.1.4.1.25506.2.42.5.1.11.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current Priority of the ethernet frames to be marked, which compliant with the 802.1D user priority standard. | ||||
| Chh3cEponUniQosConfRowStatus | 1.3.6.1.4.1.25506.2.42.5.1.11.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. The active, createAndGo and the destory statuses are supported. | ||||
| Thh3cEponUniQosRuleTable | 1.3.6.1.4.1.25506.2.42.5.1.12 | NA | ||
table · not-accessible · current Qos sub rule of the UNI. | ||||
| Rhh3cEponUniQosRuleEntry | 1.3.6.1.4.1.25506.2.42.5.1.12.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponUniQosRuleTable. | ||||
| Chh3cEponUniQosRuleIndex | 1.3.6.1.4.1.25506.2.42.5.1.12.1.1 | Integer32 (1..255) | NA | |
column · Integer32 (1..255) · not-accessible · current The sub rule index. | ||||
| Chh3cEponUniQosRuleSelector | 1.3.6.1.4.1.25506.2.42.5.1.12.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The ethernet frame selector. dstmac - based on destination MAC address. srcmac - based on source MAC address. ethernetpriority - based on ethernet priority. vlanid - based on VLAN ID. ethernettype - based on ethernet type. dstip - based on destination IP address. srcip - based on source IP address. ipprototype - based on IP type(ipv4 or ipv6). ipv4tosdscp - based on IP TOS/DSCP. ipv6 - based IP precedence. srcport - based on layer 4 source port. dstport - based on layer 4 destination port.
| ||||
| Chh3cEponUniQosRuleValue | 1.3.6.1.4.1.25506.2.42.5.1.12.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The rule value based on the hh3cEponUniQosRuleSelector. | ||||
| Chh3cEponUniQosRuleMacAddress | 1.3.6.1.4.1.25506.2.42.5.1.12.1.4 | MacAddress | RC | |
column · MacAddress · read-create · current MAC Address. | ||||
| Chh3cEponUniQosRuleOperator | 1.3.6.1.4.1.25506.2.42.5.1.12.1.5 | INTEGER | RC | |
column · INTEGER · read-create · current nervermatch - value never match. equal - field equal to the value. notequal - field not equal to the value. lessthanequal - field less than or equal to the value. greaterthanequal - field greater than or equal to the value. fieldexist - value is ignored if field exists. fieldnotexist - value is ignored if field does not exist. alwaysmatch - value always match.
| ||||
| Chh3cEponUniQosRuleRowStatus | 1.3.6.1.4.1.25506.2.42.5.1.12.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. Only active, createAndGo and the destory are supported. | ||||
| Thh3cEponUniMirrorGroupTable | 1.3.6.1.4.1.25506.2.42.5.1.13 | NA | ||
table · not-accessible · current Qos sub rule of the UNI. | ||||
| Rhh3cEponUniMirrorGroupEntry | 1.3.6.1.4.1.25506.2.42.5.1.13.1 | NA | ||
row · not-accessible · current The entry of the hh3cEponUniMirrorGroupTable. | ||||
| Chh3cEponUniMirrorGroupID | 1.3.6.1.4.1.25506.2.42.5.1.13.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Epon UNI mirror group ID. | ||||
| Chh3cEponUniMirrorInboundPortList | 1.3.6.1.4.1.25506.2.42.5.1.13.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current UNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered UNI, and the least significant bit represents the lowest numbered UNI. Thus, each UNI port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is allowed in the set of ports. the port is not allowed if its bit has a value of '0'. | ||||
| Chh3cEponUniMirrorOutboundPortList | 1.3.6.1.4.1.25506.2.42.5.1.13.1.3 | OCTET STRING | RC | |
column · OCTET STRING · read-create · current UNI outbound port list. For more information, see hh3cEponUniMirrorInboundPortList. | ||||
| Chh3cEponUniMonitorPort | 1.3.6.1.4.1.25506.2.42.5.1.13.1.4 | Integer32 | RC | |
column · Integer32 · read-create · current UNI monitor port. | ||||
| Chh3cEponUniMirrorRowStatus | 1.3.6.1.4.1.25506.2.42.5.1.13.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current RowStatus, Now support three status: createAndGo, active, destroy. | ||||
| Thh3cEponUniMirrorGroupIdNextTable | 1.3.6.1.4.1.25506.2.42.5.1.14 | NA | ||
table · not-accessible · current The next index table, which is used by hh3cEponUniMirrorGroupTable. | ||||
| Rhh3cEponUniMirrorGroupIdNextEntry | 1.3.6.1.4.1.25506.2.42.5.1.14.1 | NA | ||
| Chh3cEponUniMirrorGroupIDNext | 1.3.6.1.4.1.25506.2.42.5.1.14.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object contains an appropriate value to be used for hh3cEponUniMirrorGroupID when creating rows in the hh3cEponUniMirrorGroupTable. | ||||
| Thh3cEponUniMulticastCtrlInfoTable | 1.3.6.1.4.1.25506.2.42.5.1.15 | NA | ||
table · not-accessible · current UNI multicast information which is active . | ||||
| Rhh3cEponUniMulticastCtrlInfoEntry | 1.3.6.1.4.1.25506.2.42.5.1.15.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponUniMulticastCtrlInfoTable. | ||||
| Chh3cEponUniMultActVlan | 1.3.6.1.4.1.25506.2.42.5.1.15.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The multicast vlan ID which is active. | ||||
| Chh3cEponUniMultActAddress | 1.3.6.1.4.1.25506.2.42.5.1.15.1.2 | IpAddress | NA | |
column · IpAddress · not-accessible · current The multicast address which is active. | ||||
| Chh3cEponUniMultActAccessRule | 1.3.6.1.4.1.25506.2.42.5.1.15.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current deny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions.
| ||||
| Chh3cEponUniMultActPreTimes | 1.3.6.1.4.1.25506.2.42.5.1.15.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The number of multicast preview times which is active. | ||||
| Chh3cEponUniMultActPreRemain | 1.3.6.1.4.1.25506.2.42.5.1.15.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The remanent time slice of multicast preview which is active. | ||||
| Thh3cEponUniMulticastIndexNextTable | 1.3.6.1.4.1.25506.2.42.5.1.16 | NA | ||
table · not-accessible · current The next index table, which is used by hh3cEponUniMulticastControlTable. | ||||
| Rhh3cEponUniMulticastIndexNextEntry | 1.3.6.1.4.1.25506.2.42.5.1.16.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponUniMulticastIndexNextEntry.
| ||||
| Chh3cEponUniMulticastConfIndexNext | 1.3.6.1.4.1.25506.2.42.5.1.16.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object contains an appropriate value to be used for hh3cEponUniMulticastIndex when creating rows in the hh3cEponUniMulticastControlTable. | ||||
| Thh3cEponCTCAlarmTable | 1.3.6.1.4.1.25506.2.42.5.1.17 | NA | ||
table · not-accessible · current This table is used for setting CTC alarm of an ONU. | ||||
| Rhh3cEponCTCAlarmEntry | 1.3.6.1.4.1.25506.2.42.5.1.17.1 | NA | ||
row · not-accessible · current The entry of the hh3cEponCTCAlarmTable.
| ||||
| Chh3cEponCTCAlarmID | 1.3.6.1.4.1.25506.2.42.5.1.17.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The CTC alarm ID. There are 3 types of CTC alarms. ONU alarm: 0x0001~0x00ff PON alarm: 0x0101~0x01ff UNI alarm: 0x0301~0x05ff
| ||||
| Chh3cEponCTCAlarmProtocol | 1.3.6.1.4.1.25506.2.42.5.1.17.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Choose a CTC protocol to set CTC alarm of an ONU. auto(0) - Automatically select a CTC protocol. ctc21(33) - Use CTC2.1 protocol. ctc30(48) - Use CTC3.0 or later protocols.
| ||||
| Chh3cEponCTCAlarmEnable | 1.3.6.1.4.1.25506.2.42.5.1.17.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Enable or disable a CTC alarm of an ONU. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cEponCTCAlarmTriggerThresVal | 1.3.6.1.4.1.25506.2.42.5.1.17.1.4 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Trigger threshold value of a CTC alarm on an ONU. For different CTC alarms, there are different units(dBm, mA, V, C). | ||||
| Chh3cEponCTCAlarmClearThresVal | 1.3.6.1.4.1.25506.2.42.5.1.17.1.5 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current Clear threshold value of a CTC alarm on an ONU. For different CTC alarms, there are different units(dBm, mA, V, C). | ||||
| Nhh3cEponUniErrorInfo | 1.3.6.1.4.1.25506.2.42.5.1.18 | |||
| Shh3cEponCTCAlarmInfo | 1.3.6.1.4.1.25506.2.42.5.1.18.1 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The information of an ONU CTC alarm. | ||||
| Thh3cUniStatisticsTable | 1.3.6.1.4.1.25506.2.42.5.1.19 | NA | ||
table · not-accessible · current This table is used for enabling or disabling statistics and setting period of a UNI. | ||||
| Rhh3cUniStatisticsEntry | 1.3.6.1.4.1.25506.2.42.5.1.19.1 | NA | ||
row · not-accessible · current The entry of the hh3cUniStatisticsTable.
| ||||
| Chh3cUniStatisticsPeriodVal | 1.3.6.1.4.1.25506.2.42.5.1.19.1.1 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current UNI statistics period value. | ||||
| Chh3cUniStatisticsEnable | 1.3.6.1.4.1.25506.2.42.5.1.19.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Enable or disable statistics of an UNI. true(1) - statistics enable. false(2) - statistics disable. | ||||
| Thh3cUniPoeTable | 1.3.6.1.4.1.25506.2.42.5.1.20 | NA | ||
table · not-accessible · current This table is used for configuring the PoE function for UNIs. | ||||
| Rhh3cUniPoeEntry | 1.3.6.1.4.1.25506.2.42.5.1.20.1 | NA | ||
| Chh3cUniPoeEnable | 1.3.6.1.4.1.25506.2.42.5.1.20.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Enable PoE for an UNI. | ||||
| Chh3cUniPoeMode | 1.3.6.1.4.1.25506.2.42.5.1.20.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set the PoE mode for an UNI.
| ||||
| Chh3cUniPoePriority | 1.3.6.1.4.1.25506.2.42.5.1.20.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Set the PoE priority for an UNI.
| ||||
| Chh3cUniPoeMaxPowerClass | 1.3.6.1.4.1.25506.2.42.5.1.20.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set the PoE max power class for an UNI.
| ||||
| Chh3cUniPoeMaxPowerValue | 1.3.6.1.4.1.25506.2.42.5.1.20.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Set the PoE max power value for an UNI.
| ||||
| Chh3cUniPoeLegacyEnable | 1.3.6.1.4.1.25506.2.42.5.1.20.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current Enable PoE legacy PD detection for an UNI. | ||||
| Thh3cUniPoeInfoTable | 1.3.6.1.4.1.25506.2.42.5.1.21 | NA | ||
table · not-accessible · current This table is used for getting UNIs' PoE information. | ||||
| Rhh3cUniPoeInfoEntry | 1.3.6.1.4.1.25506.2.42.5.1.21.1 | NA | ||
| Chh3cUniPoeInfoCapability | 1.3.6.1.4.1.25506.2.42.5.1.21.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current UNI PoE capability.
| ||||
| Chh3cUniPoeInfoEnable | 1.3.6.1.4.1.25506.2.42.5.1.21.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current UNI PoE enabling status. | ||||
| Chh3cUniPoeInfoLegacyEnable | 1.3.6.1.4.1.25506.2.42.5.1.21.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current UNI PoE legacy PD detection enabling status. | ||||
| Chh3cUniPoeInfoMode | 1.3.6.1.4.1.25506.2.42.5.1.21.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current UNI PoE mode.
| ||||
| Chh3cUniPoeInfoPriority | 1.3.6.1.4.1.25506.2.42.5.1.21.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current UNI PoE priority.
| ||||
| Chh3cUniPoeInfoMaxPwrClass | 1.3.6.1.4.1.25506.2.42.5.1.21.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current UNI PoE max power class.
| ||||
| Chh3cUniPoeInfoMaxPwrValue | 1.3.6.1.4.1.25506.2.42.5.1.21.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE max power value.
| ||||
| Chh3cUniPoeInfoPdClass | 1.3.6.1.4.1.25506.2.42.5.1.21.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current UNI PoE powered device class.
| ||||
| Chh3cUniPoeInfoPwrSuppStat | 1.3.6.1.4.1.25506.2.42.5.1.21.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current UNI PoE power supply status.
| ||||
| Chh3cUniPoeInfoSignalErrCnt | 1.3.6.1.4.1.25506.2.42.5.1.21.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE signal error count. | ||||
| Chh3cUniPoeInfoPwrDeniedCnt | 1.3.6.1.4.1.25506.2.42.5.1.21.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE power denied count. | ||||
| Chh3cUniPoeInfoPwrOverCnt | 1.3.6.1.4.1.25506.2.42.5.1.21.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE power overload count. | ||||
| Chh3cUniPoeInfoCurOverCnt | 1.3.6.1.4.1.25506.2.42.5.1.21.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE current overload count. | ||||
| Chh3cUniPoeInfoPdUndetectCnt | 1.3.6.1.4.1.25506.2.42.5.1.21.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE powered device undetected count. | ||||
| Chh3cUniPoeInfoMaxPower | 1.3.6.1.4.1.25506.2.42.5.1.21.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE max power.
| ||||
| Chh3cUniPoeInfoCurOutputPwr | 1.3.6.1.4.1.25506.2.42.5.1.21.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE current output power.
| ||||
| Chh3cUniPoeInfoAvgOutputPwr | 1.3.6.1.4.1.25506.2.42.5.1.21.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE average output power.
| ||||
| Chh3cUniPoeInfoPeakOutputPwr | 1.3.6.1.4.1.25506.2.42.5.1.21.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current UNI PoE peak output power.
| ||||
| Nhh3cEponUniTrap | 1.3.6.1.4.1.25506.2.42.5.2 | |||
| Nhh3cEponUniTrapPrefix | 1.3.6.1.4.1.25506.2.42.5.2.0 | |||
| !hh3cEponUniLinkUpTrap | 1.3.6.1.4.1.25506.2.42.5.2.0.1 | |||
notification · current A hh3cEponUniLinkUpTrap notification is sent when the UNI up event is detected and the transmitting switch is turned on. | ||||
| !hh3cEponUniLinkDownTrap | 1.3.6.1.4.1.25506.2.42.5.2.0.2 | |||
notification · current A hh3cEponUniLinkDownTrap notification is sent when the UNI down event is detected and the transmitting switch is turned on. | ||||
| !hh3cEponUniLoopBackDetectedTrap | 1.3.6.1.4.1.25506.2.42.5.2.0.3 | |||
notification · current A hh3cEponUniLoopBackDetectedTrap notification is sent when the UNI loopback event is detected. | ||||
| !hh3cEponUniLoopBackRecoveredTrap | 1.3.6.1.4.1.25506.2.42.5.2.0.4 | |||
notification · current A hh3cEponUniLoopBackRecoveredTrap notification is sent when the UNI loopback is recovered. | ||||
| !hh3cEponCTCAlarmTrap | 1.3.6.1.4.1.25506.2.42.5.2.0.5 | |||
notification · current A hh3cEponCTCAlarmTrap notification is sent when an ONU CTC alarm is detected. | ||||
| !hh3cEponCTCAlarmRecoverTrap | 1.3.6.1.4.1.25506.2.42.5.2.0.6 | |||
notification · current A hh3cEponCTCAlarmRecoverTrap notification is sent when an ONU CTC alarm is cleared. | ||||
Traps / Notifications
- hh3cEponCTCAlarmRecoverTrap
1.3.6.1.4.1.25506.2.42.5.2.0.6 - hh3cEponCTCAlarmTrap
1.3.6.1.4.1.25506.2.42.5.2.0.5 - hh3cEponUniLinkDownTrap
1.3.6.1.4.1.25506.2.42.5.2.0.2 - hh3cEponUniLinkUpTrap
1.3.6.1.4.1.25506.2.42.5.2.0.1 - hh3cEponUniLoopBackDetectedTrap
1.3.6.1.4.1.25506.2.42.5.2.0.3 - hh3cEponUniLoopBackRecoveredTrap
1.3.6.1.4.1.25506.2.42.5.2.0.4