HH3C-EPON-MIB
H3CThe objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
snmptranslate -m HH3C-EPON-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-EPON-MIB <host> 1.3.6.1.4.1.25506.2.42.1Imports
| HH3C-LSW-DEV-ADM-MIB | hh3cLswFrameIndex, hh3cLswSlotIndex |
|---|---|
| HH3C-OID-MIB | hh3cEpon |
| IF-MIB | ifDescr, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, private |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cEponMibObjects | 1.3.6.1.4.1.25506.2.42.1 | |||
identity The objects in this MIB module are used to manage and display current configuration of Ethernet Passive Optical Network (EPON) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. | ||||
| Nhh3cEponSysMan | 1.3.6.1.4.1.25506.2.42.1.1 | |||
| Shh3cEponAutoAuthorize | 1.3.6.1.4.1.25506.2.42.1.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current This value determines whether software performs self-authorization for each Optical Network Unit(ONU) registering to the network. Setting it to false means for every ONU registering, software requires external authorization, and until it's done the ONU is not authenticated. True value means software authorizes each ONU registering to the network automatically. true - ONUs are always authorized. false - If 802.1x authorization is enable, the ONUs have to be authorized by the protocol. - If 802.1x authorization is disable, ONUs are always authorized. | ||||
| Shh3cEponMonitorCycle | 1.3.6.1.4.1.25506.2.42.1.1.2 | Integer32 (1..3600) | RW | |
scalar · Integer32 (1..3600) · read-write · current The cycle of alarm thresholds checking. Applying to the following types: Bit Error Rate(BER) alarm, Frame Error Rate(FER), Logical Link Identity(LLID) mismatch alarm and so on. The unit is second. | ||||
| Shh3cEponMsgTimeOut | 1.3.6.1.4.1.25506.2.42.1.1.3 | Integer32 | RW | |
scalar · Integer32 · read-write · current Timeout waiting for a response from Optical Line Terminal(OLT) firmware after sending it a message. The unit is millisecond. | ||||
| Shh3cEponMsgLoseNum | 1.3.6.1.4.1.25506.2.42.1.1.4 | Integer32 | RW | |
scalar · Integer32 · read-write · current The times of messages sending timeouts, after which OLT will reset (applying to every OLT). | ||||
| Shh3cEponSysHasEPONBoard | 1.3.6.1.4.1.25506.2.42.1.1.5 | TruthValue | RO | |
scalar · TruthValue · read-only · current true(1) - At least an EPON board exists. false(2) - No EPON board exists. | ||||
| Shh3cEponMonitorCycleEnable | 1.3.6.1.4.1.25506.2.42.1.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Stop or continue monitoring. true(1) - Continue monitoring. false(2) - Stop monitoring. | ||||
| Shh3cEponOltSoftwareErrAlmEnable | 1.3.6.1.4.1.25506.2.42.1.1.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current Software error alarm behavior of all active OLTs. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Shh3cEponPortLoopBackAlmEnable | 1.3.6.1.4.1.25506.2.42.1.1.8 | TruthValue | RW | |
scalar · TruthValue · read-write · current LoopBack alarm behavior of EPON ports. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Shh3cEponMonitorCycleMinVal | 1.3.6.1.4.1.25506.2.42.1.1.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of cycle which be confined to the hh3cEponMonitorCycle. | ||||
| Shh3cEponMonitorCycleMaxVal | 1.3.6.1.4.1.25506.2.42.1.1.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of cycle which be confined to the hh3cEponMonitorCycle. | ||||
| Shh3cEponMsgTimeOutMinVal | 1.3.6.1.4.1.25506.2.42.1.1.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of timeout which be confined to the hh3cEponMsgTimeOut. | ||||
| Shh3cEponMsgTimeOutMaxVal | 1.3.6.1.4.1.25506.2.42.1.1.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of timeout which be confined to the hh3cEponMsgTimeOut. | ||||
| Shh3cEponMsgLoseNumMinVal | 1.3.6.1.4.1.25506.2.42.1.1.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of time which be confined to the hh3cEponMsgLoseNum. | ||||
| Shh3cEponMsgLoseNumMaxVal | 1.3.6.1.4.1.25506.2.42.1.1.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of time which be confined to the hh3cEponMsgLoseNum. | ||||
| Nhh3cEponSysScalarGroup | 1.3.6.1.4.1.25506.2.42.1.1.15 | |||
| Thh3cEponSysManTable | 1.3.6.1.4.1.25506.2.42.1.1.16 | NA | ||
table · not-accessible · current This table defines system related parameters. | ||||
| Rhh3cEponSysManEntry | 1.3.6.1.4.1.25506.2.42.1.1.16.1 | NA | ||
| Chh3cEponSlotIndex | 1.3.6.1.4.1.25506.2.42.1.1.16.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Slot Index, the index of hh3cEponSysManTable. | ||||
| Chh3cEponModeSwitch | 1.3.6.1.4.1.25506.2.42.1.1.16.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current cmode - epon standard mode. hmode - private mode.
| ||||
| Chh3cEponAutomaticMode | 1.3.6.1.4.1.25506.2.42.1.1.16.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Automatic mode setting: when enabled - after new OLT is added, the OLT stack sets its encryption mode to 'triple churning' and configure the OLT to authorize ONU MAC addresses according to its table. enable -enable automatic mode. disable -disable automatic mode.
| ||||
| Chh3cEponOamDiscoveryTimeout | 1.3.6.1.4.1.25506.2.42.1.1.16.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Time out parameter for extended OAM discovery process message, ranging from 0 to 2550, measured in 100 milliseconds. | ||||
| Chh3cEponEncryptionNoReplyTimeOut | 1.3.6.1.4.1.25506.2.42.1.1.16.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Encryption response timeout, ranging from 1 to 2550, measured in 100 milliseconds. | ||||
| Chh3cEponEncryptionUpdateTime | 1.3.6.1.4.1.25506.2.42.1.1.16.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Encryption key update timer for all ONUs on slot, indicated by hh3cEponSlotIndex, ranging from 1 to 255, measured in seconds. | ||||
| Chh3cEponAutoBindStatus | 1.3.6.1.4.1.25506.2.42.1.1.16.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current enable - auto bind ONU ID when the ONU registered in the EPON system. disable - need manual bind ONU ID when the ONU registered in the EPON system.
| ||||
| Chh3cEponAutoBindType | 1.3.6.1.4.1.25506.2.42.1.1.16.1.8 | Bits | RW | |
column · Bits · read-write · current Set auto binding type, which can be combined. If auto binding is disabled, 0 is returned.
| ||||
| Thh3cEponAutoUpdateTable | 1.3.6.1.4.1.25506.2.42.1.1.17 | NA | ||
table · not-accessible · current EPON auto update ONU application configuration. | ||||
| Rhh3cEponAutoUpdateEntry | 1.3.6.1.4.1.25506.2.42.1.1.17.1 | NA | ||
| Chh3cEponAutoUpdateFileName | 1.3.6.1.4.1.25506.2.42.1.1.17.1.1 | DisplayString (SIZE (0..255)) | RW | |
column · DisplayString (SIZE (0..255)) · read-write · current The name of ONU application file, the file name must be valid and include the path. It is a zero length string by default. | ||||
| Chh3cEponAutoUpdateSchedStatus | 1.3.6.1.4.1.25506.2.42.1.1.17.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The status of schedule update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateSchedStatus. enable - enable ONU schedule update. disable - disable ONU schedule update.
| ||||
| Chh3cEponAutoUpdateSchedTime | 1.3.6.1.4.1.25506.2.42.1.1.17.1.3 | OCTET STRING (SIZE (0..255)) | RW | |
column · OCTET STRING (SIZE (0..255)) · read-write · current The schedule update timing configuration is related to the hh3cEponAutoUpdateSchedType. auto update daily: the string format is hhmm auto update weekly: the string format is hhmmw 'w' means update weekly, it ranges from 0 to 6: 0 - Sunday. 1 - Monday. 2 - Tuesday. 3 - Wednesday. 4 - Thursday. 5 - Friday. 6 - Saturday. auto update in coming date : the string format is hhmmyyyymmdd. The configuration will take effect only if hh3cEponAutoUpdateSchedStatus is enabled. | ||||
| Chh3cEponAutoUpdateSchedType | 1.3.6.1.4.1.25506.2.42.1.1.17.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The update type of auto updating configuration. daily - update ONU application every day. weekly - update ONU application every week. comingdate - update ONU application on coming date.
| ||||
| Chh3cEponAutoUpdateRealTimeStatus | 1.3.6.1.4.1.25506.2.42.1.1.17.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The status of real time update configuration. The hh3cEponAutoUpdateFileName must be set before enable hh3cEponAutoUpdateRealTimeStatus. enable - enable ONU real time update. disable - disable ONU real time update.
| ||||
| Thh3cEponOuiIndexNextTable | 1.3.6.1.4.1.25506.2.42.1.1.18 | NA | ||
table · not-accessible · current Next OUI index table. | ||||
| Rhh3cEponOuiIndexNextEntry | 1.3.6.1.4.1.25506.2.42.1.1.18.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponOuiIndexNextTable.
| ||||
| Chh3cEponOuiIndexNext | 1.3.6.1.4.1.25506.2.42.1.1.18.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current This object contains an appropriate value to be used for hh3cEponOuiIndex when creating rows in the hh3cEponOuiTable. | ||||
| Thh3cEponOuiTable | 1.3.6.1.4.1.25506.2.42.1.1.19 | NA | ||
table · not-accessible · current List of OUI and OAM supported by OLT. | ||||
| Rhh3cEponOuiEntry | 1.3.6.1.4.1.25506.2.42.1.1.19.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponOuiTable. | ||||
| Chh3cEponOuiIndex | 1.3.6.1.4.1.25506.2.42.1.1.19.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of this table. | ||||
| Chh3cEponOuiValue | 1.3.6.1.4.1.25506.2.42.1.1.19.1.2 | OCTET STRING (SIZE (0..512)) | RC | |
column · OCTET STRING (SIZE (0..512)) · read-create · current OUI list supported by the extended OAM discovery process. The OUI is composed of six octets. The first six octets denote the first OUI , the second six octets denote the second OUI, and the like. | ||||
| Chh3cEponOamVersion | 1.3.6.1.4.1.25506.2.42.1.1.19.1.3 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current Version of OAM protocol defined by the organization denoted by OUI. | ||||
| Chh3cEponOuiRowStatus | 1.3.6.1.4.1.25506.2.42.1.1.19.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. Only active, createAndGo, and destroy are supported. | ||||
| Thh3cEponMulticastControlTable | 1.3.6.1.4.1.25506.2.42.1.1.20 | NA | ||
table · not-accessible · current Multicast control global configuration. | ||||
| Rhh3cEponMulticastControlEntry | 1.3.6.1.4.1.25506.2.42.1.1.20.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponMulticastControlTable. | ||||
| Chh3cEponMulticastVlanId | 1.3.6.1.4.1.25506.2.42.1.1.20.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of this table. | ||||
| Chh3cEponMulticastAddressList | 1.3.6.1.4.1.25506.2.42.1.1.20.1.2 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and the like. | ||||
| Chh3cEponMulticastStatus | 1.3.6.1.4.1.25506.2.42.1.1.20.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. Only active, createAndGo, and destroy are supported. | ||||
| Shh3cEponAuthMode | 1.3.6.1.4.1.25506.2.42.1.1.21 | Bits | RW | |
scalar · Bits · read-write · current Set global auth mode, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.
| ||||
| Shh3cEponOnuBindOneToOne | 1.3.6.1.4.1.25506.2.42.1.1.22 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable. | ||||
| Thh3cEponOnuBlackListMacTable | 1.3.6.1.4.1.25506.2.42.1.1.23 | NA | ||
table · not-accessible · current The table contains the configurations for managing the ONU MAC blacklist. | ||||
| Rhh3cEponOnuBlackListMacEntry | 1.3.6.1.4.1.25506.2.42.1.1.23.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponOnuBlackListMacTable. | ||||
| Chh3cEponOnuBlackListMac | 1.3.6.1.4.1.25506.2.42.1.1.23.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The ONU MAC blacklist value. This value is used to specify the blacklist MAC which is bound by the ONU interface. | ||||
| Chh3cEponOnuBlackListMacRowStatus | 1.3.6.1.4.1.25506.2.42.1.1.23.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation. | ||||
| Thh3cEponOnuBlackListLoidTable | 1.3.6.1.4.1.25506.2.42.1.1.24 | NA | ||
table · not-accessible · current The table contains the configurations for managing the ONU LOID blacklist. | ||||
| Rhh3cEponOnuBlackListLoidEntry | 1.3.6.1.4.1.25506.2.42.1.1.24.1 | NA | ||
row · not-accessible · current The entry of the table hh3cEponOnuBlackListLoidTable. | ||||
| Chh3cEponOnuBlackListLoid | 1.3.6.1.4.1.25506.2.42.1.1.24.1.1 | OCTET STRING (SIZE (1..24)) | RO | |
column · OCTET STRING (SIZE (1..24)) · read-only · current The ONU LOID blacklist value. This value is used to specify the blacklist LOID which is bound by the ONU interface. | ||||
| Chh3cEponOnuBlackListLoidRowStatus | 1.3.6.1.4.1.25506.2.42.1.1.24.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation. | ||||
| Nhh3cEponFileName | 1.3.6.1.4.1.25506.2.42.1.2 | |||
| Shh3cEponDbaUpdateFileName | 1.3.6.1.4.1.25506.2.42.1.2.1 | OCTET STRING (SIZE (0..64)) | RW | |
scalar · OCTET STRING (SIZE (0..64)) · read-write · current The name of a binary file which is loaded to the OLT from an external source. Note that the filename must contain the file path. | ||||
| Shh3cEponOnuUpdateFileName | 1.3.6.1.4.1.25506.2.42.1.2.2 | OCTET STRING (SIZE (0..64)) | RW | |
scalar · OCTET STRING (SIZE (0..64)) · read-write · current The filename of the ONU firmware to be updated. Note that the filename must contain the file path. | ||||
| Nhh3cEponOltMan | 1.3.6.1.4.1.25506.2.42.1.3 | |||
| Thh3cOltSysManTable | 1.3.6.1.4.1.25506.2.42.1.3.1 | NA | ||
table · not-accessible · current This table defines several OLT system parameters: (1)laser on time (2)laser off time (3)whether multiple copy broadcast (4)whether discard packet (5)self test (6)self test result | ||||
| Rhh3cOltSysManEntry | 1.3.6.1.4.1.25506.2.42.1.3.1.1 | NA | ||
| Chh3cOltLaserOnTime | 1.3.6.1.4.1.25506.2.42.1.3.1.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current The laser on time of the ONUs during the discovery process, measured in Time Quanta(TQ). | ||||
| Chh3cOltLaserOffTime | 1.3.6.1.4.1.25506.2.42.1.3.1.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The laser off time of the ONUs during the discovery process, measured in TQ. | ||||
| Chh3cOltMultiCopyBrdCast | 1.3.6.1.4.1.25506.2.42.1.3.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current true/false filtering of tagged multicast frames. The software avert tagged downstream frames with multicast or broadcast DA to the PON and not to the CPU, except for special multicast frames (link-constraint, IGMP control and ARP) that are passed to the CPU regardless of this feature. | ||||
| Chh3cOltEnableDiscardPacket | 1.3.6.1.4.1.25506.2.42.1.3.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Forward(false)/discard(true) any frames received from unlearned source address when the inside address table of the original ONU entry reach to the limit. | ||||
| Chh3cOltSelfTest | 1.3.6.1.4.1.25506.2.42.1.3.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current selftest(1): Test OLT to check whether it's OK.
| ||||
| Chh3cOltSelfTestResult | 1.3.6.1.4.1.25506.2.42.1.3.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The self test result of the specific OLT. other(1): The self test result is another reason. ok(2): The self test result is OK. fail(3): The self test result is fail.
| ||||
| Chh3cOltMaxRtt | 1.3.6.1.4.1.25506.2.42.1.3.1.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Set the max Round Trip Time of this OLT. | ||||
| Chh3cOltAuthMode | 1.3.6.1.4.1.25506.2.42.1.3.1.1.8 | Bits | RW | |
column · Bits · read-write · current Set the auth mode of this OLT, which can be combined(loid and loid-password cannot be configured at the same time). If no auth mode was set, 0 is returned.
| ||||
| Chh3cOltOnuBindOneToOne | 1.3.6.1.4.1.25506.2.42.1.3.1.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Enable or disable one-to-one ONU binding feature. true(1) - feature enable. false(2) - feature disable. | ||||
| Thh3cOltInfoTable | 1.3.6.1.4.1.25506.2.42.1.3.2 | NA | ||
table · not-accessible · current Primary status of the specified OLT. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified OLT (hh3cOltFirmMajorVersion, hh3cOltFirmMinorVersion, hh3cOltHardMajorVersion, hh3cOltHardMinorVersion) (2)Several physical capabilities of an OLT device. (hh3cOltAgcLockTime, hh3cOltAgcCdrTime) (3)The operation(activation) status of an OLT. (hh3cOltMacAddress, hh3cOltWorkMode) | ||||
| Rhh3cOltInfoEntry | 1.3.6.1.4.1.25506.2.42.1.3.2.1 | NA | ||
| Chh3cOltFirmMajorVersion | 1.3.6.1.4.1.25506.2.42.1.3.2.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current OLT firmware major version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cOltFirmMinorVersion | 1.3.6.1.4.1.25506.2.42.1.3.2.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current OLT firmware minor version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cOltHardMajorVersion | 1.3.6.1.4.1.25506.2.42.1.3.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current OLT hardware major version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cOltHardMinorVersion | 1.3.6.1.4.1.25506.2.42.1.3.2.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current OLT hardware minor version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cOltAgcLockTime | 1.3.6.1.4.1.25506.2.42.1.3.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current PON upstream data Automatic Gain Control(AGC) lock time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value. | ||||
| Chh3cOltAgcCdrTime | 1.3.6.1.4.1.25506.2.42.1.3.2.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current PON RX signal synchronization time, measured in TQ, range: 1 - 2^15. 0x7FFFFFFF: unknown value | ||||
| Chh3cOltMacAddress | 1.3.6.1.4.1.25506.2.42.1.3.2.1.7 | MacAddress | RO | |
column · MacAddress · read-only · current OLT MAC address. | ||||
| Chh3cOltWorkMode | 1.3.6.1.4.1.25506.2.42.1.3.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The operation(activation) modes of an OLT. other(1) - The OLT is in another mode. open(2) - The OLT is open. reset(3) - The OLT is reset. closed(4) - The OLT is closed.
| ||||
| Chh3cOltOpticalPowerTx | 1.3.6.1.4.1.25506.2.42.1.3.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The optical power transmitted by this OLT. It measured in 0.01 dBm unit. | ||||
| Chh3cOltOpticalPowerRx | 1.3.6.1.4.1.25506.2.42.1.3.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The burst optical power received by this OLT. It measured in 0.01 dBm unit. | ||||
| Thh3cOltDbaManTable | 1.3.6.1.4.1.25506.2.42.1.3.3 | NA | ||
table · not-accessible · current This table defines the primary parameters of the Dynamic Bandwidth Allocation(DBA) algorithm applying to the OLT. | ||||
| Rhh3cOltDbaManEntry | 1.3.6.1.4.1.25506.2.42.1.3.3.1 | NA | ||
| Chh3cOltDbaEnabledType | 1.3.6.1.4.1.25506.2.42.1.3.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable different types of the DBA algorithm. Start upstream dynamic bandwidth allocation algorithm, replacing former bandwidth allocation mechanism. internal(1) - OLT internal Service Level Agreement(SLA) based algorithm, always being activated. external(2) - DBA algorithm in a binary file which is loaded to the OLT from an external source.
| ||||
| Chh3cOltDbaDiscoveryLength | 1.3.6.1.4.1.25506.2.42.1.3.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Discovery length in TQ units. | ||||
| Chh3cOltDbaDiscovryFrequency | 1.3.6.1.4.1.25506.2.42.1.3.3.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current How often should the OLT send discovery frames to the ONUs, measured in grant cycles. | ||||
| Chh3cOltDbaCycleLength | 1.3.6.1.4.1.25506.2.42.1.3.3.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The grant cycle length in TQ units. | ||||
| Chh3cOltDbaVersion | 1.3.6.1.4.1.25506.2.42.1.3.3.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current DBA version of the OLT. | ||||
| Chh3cOltDbaUpdate | 1.3.6.1.4.1.25506.2.42.1.3.3.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Update(1): Update the DBA algorithm with a binary file which is loaded to the OLT from an external source(flash). Config the MIB object module hh3cEponDbaUpdateFileName.
| ||||
| Chh3cOltDbaUpdateResult | 1.3.6.1.4.1.25506.2.42.1.3.3.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The latest DBA update result. other: The DBA update result is another reason. ok: The DBA update result is OK. fail: The DBA update result is fail. fileNotExist: The DBA update failed because the file does not exist. notSetFilename: The DBA filename is not set.
| ||||
| Thh3cOltPortAlarmThresholdTable | 1.3.6.1.4.1.25506.2.42.1.3.4 | NA | ||
table · not-accessible · current The table defines the alarm threshold of OLT. | ||||
| Rhh3cOltPortAlarmThresholdEntry | 1.3.6.1.4.1.25506.2.42.1.3.4.1 | NA | ||
| Chh3cOltPortAlarmBerEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of BER alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmBerDirect | 1.3.6.1.4.1.25506.2.42.1.3.4.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Traffic direction to monitor for BER alarm.
| ||||
| Chh3cOltPortAlarmBerThreshold | 1.3.6.1.4.1.25506.2.42.1.3.4.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current BER threshold exceed which the alarm is raised. | ||||
| Chh3cOltPortAlarmFerEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of FER alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmFerDirect | 1.3.6.1.4.1.25506.2.42.1.3.4.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Traffic direction to monitor for FER alarm.
| ||||
| Chh3cOltPortAlarmFerThreshold | 1.3.6.1.4.1.25506.2.42.1.3.4.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Frame error rate exceed threshold then the alarm is raised. | ||||
| Chh3cOltPortAlarmLlidMismatchEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of LLID mismatch alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmLlidMismatchThreshold | 1.3.6.1.4.1.25506.2.42.1.3.4.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The minimal number of mismatched frames exceed threshold then LLID mismatch alarm is raised. | ||||
| Chh3cOltPortAlarmRemoteStableEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of remote stable alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmLocalStableEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of local stable alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmRegistrationEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of registration alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmOamDisconnectionEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.12 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of Operations Administration and Maintenance(OAM) disconnection alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmEncryptionKeyEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of encryption bad key alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmVendorSpecificEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of vendor specific alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmRegExcessEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.15 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of ONU registering over limitation alarm. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Chh3cOltPortAlarmDFEEnabled | 1.3.6.1.4.1.25506.2.42.1.3.4.1.16 | TruthValue | RW | |
column · TruthValue · read-write · current Behavior of device fatal error alarm. true - alarm enable. false - alarm disable. | ||||
| Shh3cOltLaserOnTimeMinVal | 1.3.6.1.4.1.25506.2.42.1.3.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of time which is confined to hh3cOltLaserOnTime. | ||||
| Shh3cOltLaserOnTimeMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of time which is confined to hh3cOltLaserOnTime. | ||||
| Shh3cOltLaserOffTimeMinVal | 1.3.6.1.4.1.25506.2.42.1.3.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of time which is confined to hh3cOltLaserOffTime. | ||||
| Shh3cOltLaserOffTimeMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of time which is confined to hh3cOltLaserOffTime. | ||||
| Shh3cOltDbaDiscoveryLengthMinVal | 1.3.6.1.4.1.25506.2.42.1.3.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength. | ||||
| Shh3cOltDbaDiscoveryLengthMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of the discovery length which is confined to hh3cOltDbaDiscoveryLength. | ||||
| Shh3cOltDbaDiscovryFrequencyMinVal | 1.3.6.1.4.1.25506.2.42.1.3.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency. | ||||
| Shh3cOltDbaDiscovryFrequencyMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of the discovery length which is confined to hh3cOltDbaDiscovryFrequency. | ||||
| Shh3cOltDbaCycleLengthMinVal | 1.3.6.1.4.1.25506.2.42.1.3.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of the frames which is confined to hh3cOltDbaCycleLength. | ||||
| Shh3cOltDbaCycleLengthMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of the frames which is confined to hh3cOltDbaCycleLength. | ||||
| Shh3cOltPortAlarmLlidMisMinVal | 1.3.6.1.4.1.25506.2.42.1.3.15 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold. | ||||
| Shh3cOltPortAlarmLlidMisMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of the frames which is confined to hh3cOltPortAlarmLlidMismatchThreshold. | ||||
| Shh3cOltPortAlarmBerMinVal | 1.3.6.1.4.1.25506.2.42.1.3.17 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of threshold which is confined to hh3cOltPortAlarmBerThreshold. | ||||
| Shh3cOltPortAlarmBerMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of threshold which is confined to hh3cOltPortAlarmBerThreshold. | ||||
| Shh3cOltPortAlarmFerMinVal | 1.3.6.1.4.1.25506.2.42.1.3.19 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of threshold which is confined to hh3cOltPortAlarmFerThreshold. | ||||
| Shh3cOltPortAlarmFerMaxVal | 1.3.6.1.4.1.25506.2.42.1.3.20 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of threshold which is confined to hh3cOltPortAlarmFerThreshold. | ||||
| Thh3cOnuSilentTable | 1.3.6.1.4.1.25506.2.42.1.3.21 | NA | ||
table · not-accessible · current This table is used for getting silent ONU information of OLT. | ||||
| Rhh3cOnuSilentEntry | 1.3.6.1.4.1.25506.2.42.1.3.21.1 | NA | ||
row · not-accessible · current The entry of the table hh3cOnuSilentTable.
| ||||
| Chh3cOnuSilentMacAddr | 1.3.6.1.4.1.25506.2.42.1.3.21.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The MAC address of silent ONUs in OLT. | ||||
| Chh3cOnuSilentTime | 1.3.6.1.4.1.25506.2.42.1.3.21.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The aging time of a silent ONU. | ||||
| Thh3cOltUsingOnuTable | 1.3.6.1.4.1.25506.2.42.1.3.22 | NA | ||
table · not-accessible · current The table containing configurations to manage ONU interface(s) based on OLT interface. | ||||
| Rhh3cOltUsingOnuEntry | 1.3.6.1.4.1.25506.2.42.1.3.22.1 | NA | ||
row · not-accessible · current The entry of the table hh3cOltUsingOnuTable.
| ||||
| Chh3cOltUsingOnuNum | 1.3.6.1.4.1.25506.2.42.1.3.22.1.1 | Integer32 (1..128) | NA | |
column · Integer32 (1..128) · not-accessible · current The ONU interface number. This value is used to specify the ONU interface which the user wants to configure for an OLT interface. | ||||
| Chh3cOltUsingOnuIfIndex | 1.3.6.1.4.1.25506.2.42.1.3.22.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The ifIndex of the ONU interface. | ||||
| Chh3cOltUsingOnuRowStatus | 1.3.6.1.4.1.25506.2.42.1.3.22.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreatAndGo, destroy operation. | ||||
| Thh3cOnuSilentLoidTable | 1.3.6.1.4.1.25506.2.42.1.3.23 | NA | ||
table · not-accessible · current This table is used for getting silent ONU's LOID information of an OLT. | ||||
| Rhh3cOnuSilentLoidEntry | 1.3.6.1.4.1.25506.2.42.1.3.23.1 | NA | ||
row · not-accessible · current The entry of the table hh3cOnuSilentLoidTable.
| ||||
| Chh3cOnuSilentLoid | 1.3.6.1.4.1.25506.2.42.1.3.23.1.1 | OCTET STRING (SIZE (1..24)) | NA | |
column · OCTET STRING (SIZE (1..24)) · not-accessible · current The LOID of a silent ONU in an OLT. | ||||
| Chh3cOnuSilentLoidTime | 1.3.6.1.4.1.25506.2.42.1.3.23.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The aging time of a silent ONU. | ||||
| Thh3cOltTransceiverTxPowerTable | 1.3.6.1.4.1.25506.2.42.1.3.24 | NA | ||
table · not-accessible · current This table is used for setting ONU's Tx power on an OLT. | ||||
| Rhh3cOltTransceiverTxPowerEntry | 1.3.6.1.4.1.25506.2.42.1.3.24.1 | NA | ||
| Chh3cOltTransTxPwrTransId | 1.3.6.1.4.1.25506.2.42.1.3.24.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The transceiver ID of an ONU in an OLT.
| ||||
| Chh3cOltTransTxPwrOffTime | 1.3.6.1.4.1.25506.2.42.1.3.24.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The turnoff time of the transceiver Tx power. | ||||
| Chh3cOltTransTxPwrIsAllOnu | 1.3.6.1.4.1.25506.2.42.1.3.24.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Setting all ONUs' transceiver Tx power or not. | ||||
| Chh3cOltTransTxPwrOnuIfList | 1.3.6.1.4.1.25506.2.42.1.3.24.1.4 | OCTET STRING (SIZE (0..20)) | RW | |
column · OCTET STRING (SIZE (0..20)) · read-write · current ONUs' ifIndex for which the transceiver Tx power is to be set. | ||||
| Nhh3cEponOnuMan | 1.3.6.1.4.1.25506.2.42.1.5 | |||
| Thh3cOnuSysManTable | 1.3.6.1.4.1.25506.2.42.1.5.1 | NA | ||
table · not-accessible · current This table implements the following functions for ONUs: 1. Encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). 2. Restart a process of ONU authentication, using the OLT (IEEE 802.1x) authenticator. | ||||
| Rhh3cOnuSysManEntry | 1.3.6.1.4.1.25506.2.42.1.5.1.1 | NA | ||
| Chh3cOnuEncryptMan | 1.3.6.1.4.1.25506.2.42.1.5.1.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Start encrypting all downstream/upstream and downstream directions traffic destined to and originated from a specific LLID (ONU in current implementation). ONU registration encryption key is used as an initial value. If the encryption key was updated after ONU registration, the last updated key is used. off(1): - Stop encrypting. downlink(2): - Start encrypting all downstream directions traffic. updownlink(3): - Start encrypting all downstream/upstream directions traffic.
| ||||
| Chh3cOnuReAuthorize | 1.3.6.1.4.1.25506.2.42.1.5.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Restart a process of ONU authentication. If 802.1x authentication is enabled, the OLT (IEEE 802.1x) authenticator is applied. Otherwise, use the default authentication. Until the reauthentication succeeds, the ONU remains its previous authorization mode. The reauthentication process includes a new authentication request sent to the authentication server.
| ||||
| Chh3cOnuMulticastFilterStatus | 1.3.6.1.4.1.25506.2.42.1.5.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - Multicast-Filter enable on ONU. false(2) - Multicast-Filter disable on ONU. | ||||
| Chh3cOnuDbaReportQueueSetNumber | 1.3.6.1.4.1.25506.2.42.1.5.1.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current The number of queue sets reported in MPCP report frames. | ||||
| Chh3cOnuRemoteFecStatus | 1.3.6.1.4.1.25506.2.42.1.5.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction see [802.3ah] clause 65.2. enable - enable remote forward error correction. disable - disable remote forward error correction.
| ||||
| Chh3cOnuPortBerStatus | 1.3.6.1.4.1.25506.2.42.1.5.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current enable - enable ONU port bit error rate alarm. disable - disable ONU port bit error rate alarm.
| ||||
| Chh3cOnuReset | 1.3.6.1.4.1.25506.2.42.1.5.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Reboot ONU.
| ||||
| Chh3cOnuMulticastControlMode | 1.3.6.1.4.1.25506.2.42.1.5.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current igmpsnooping - the traditional IGMP snooping mode. multicastcontrol - the specific multicast control mode.
| ||||
| Chh3cOnuAccessVlan | 1.3.6.1.4.1.25506.2.42.1.5.1.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current The VLAN ID assigned to untagged frames received on ONU. | ||||
| Chh3cOnuEncryptKey | 1.3.6.1.4.1.25506.2.42.1.5.1.1.10 | DisplayString (SIZE (0..255)) | RW | |
column · DisplayString (SIZE (0..255)) · read-write · current The encryption key, used to encrypt all downstream traffic destined to and/or upstream traffic originating from a specific ONU. It is a zero length, or MD5 hashed string, by default, the string is empty. | ||||
| Chh3cOnuUniUpDownTrapStatus | 1.3.6.1.4.1.25506.2.42.1.5.1.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current true - A notification will be sent when UNI link status is change. false - Device will not sent notification when UNI link status is change. | ||||
| Chh3cOnuFecStatus | 1.3.6.1.4.1.25506.2.42.1.5.1.1.12 | INTEGER | RW | |
column · INTEGER · read-write · current Value that indicates status of the 1000BASE-PX PHY optional FEC Sublayer for forward error correction (include remote onu and local OLT) see [802.3ah] clause 65.2 enable - enable forward error correction. disable - disable forward error correction.
| ||||
| Chh3cOnuMcastCtrlHostAgingTime | 1.3.6.1.4.1.25506.2.42.1.5.1.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current The host aging time of multicast control mode on ONU, ranging from 200 to 1000, measured in seconds. | ||||
| Chh3cOnuMulticastFastLeaveEnable | 1.3.6.1.4.1.25506.2.42.1.5.1.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - Enable multicast fast leave attribute on all ethernet UNIs of the ONU. false(2) - Disable multicast fast leave attribute on all ethernet UNIs of the ONU. | ||||
| Chh3cOnuPortIsolateEnable | 1.3.6.1.4.1.25506.2.42.1.5.1.1.15 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - Enable port isolate setting on all ethernet UNIs of the ONU. false(2) - Disable port isolate setting on all ethernet UNIs of the ONU. | ||||
| Chh3cOnuMacAddressTimer | 1.3.6.1.4.1.25506.2.42.1.5.1.1.16 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current no-aging(0) - Disable aging. others - Aging time(seconds). | ||||
| Thh3cOnuLinkTestTable | 1.3.6.1.4.1.25506.2.42.1.5.2 | NA | ||
table · not-accessible · current LLID link test applying to the ONU only including delay measurement option. The command tests a link to a single LLID over a period of time or once, using a variable number of measurement frames. The length of the measurement frames is also parameterized. The test uses a loopback mode of the ONU to return each measurement frame, loopback activation is done using randomly patterned OAM Protocol Data Unit(PDU) frames. | ||||
| Rhh3cOnuLinkTestEntry | 1.3.6.1.4.1.25506.2.42.1.5.2.1 | NA | ||
| Chh3cOnuLinkTestFrameNum | 1.3.6.1.4.1.25506.2.42.1.5.2.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current Exact number of measurement frames. | ||||
| Chh3cOnuLinkTestFrameSize | 1.3.6.1.4.1.25506.2.42.1.5.2.1.2 | Integer32 (60..1514) | RW | |
column · Integer32 (60..1514) · read-write · current Measurement frames data size, measured in bytes.
Not including Preamble, SFD, VLAN tag, and FCS.
Frame size minimum value is 56 - if VLAN tag is
enabled('VLAN enable' field is set to ENABLE),
and 60 - if VLAN tag is disabled. The actual
measurement frames sent to the PON are always
minimum 60 bytes long. When VLAN tag is enabled,
the actual measurement frames size including
FCS may reach (1514+4+4=)1522 bytes.
60(60 is VLAN tag disabled) - 1514 . | ||||
| Chh3cOnuLinkTestDelay | 1.3.6.1.4.1.25506.2.42.1.5.2.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current true:Link test includes delay measurement, which corresponds to the difference between sent and received times(including granting delay and firmware processing time overheads). false:Link test not includes a delay measurement. | ||||
| Chh3cOnuLinkTestVlanTag | 1.3.6.1.4.1.25506.2.42.1.5.2.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable VLAN tag in link test frames. false:Link test not includes frames with VLAN tag. | ||||
| Chh3cOnuLinkTestVlanPriority | 1.3.6.1.4.1.25506.2.42.1.5.2.1.5 | Integer32 (0..7) | RW | |
column · Integer32 (0..7) · read-write · current VLAN priority: 0-7. | ||||
| Chh3cOnuLinkTestVlanTagID | 1.3.6.1.4.1.25506.2.42.1.5.2.1.6 | Integer32 (1..4094) | RW | |
column · Integer32 (1..4094) · read-write · current VLAN ID: 1-4094. | ||||
| Chh3cOnuLinkTestResultSentFrameNum | 1.3.6.1.4.1.25506.2.42.1.5.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of frames sent during the link test process. | ||||
| Chh3cOnuLinkTestResultRetFrameNum | 1.3.6.1.4.1.25506.2.42.1.5.2.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of frames return back during the link test process. | ||||
| Chh3cOnuLinkTestResultRetErrFrameNum | 1.3.6.1.4.1.25506.2.42.1.5.2.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The total number of error frames return back during the link test process. | ||||
| Chh3cOnuLinkTestResultMinDelay | 1.3.6.1.4.1.25506.2.42.1.5.2.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The minimum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true. | ||||
| Chh3cOnuLinkTestResultMeanDelay | 1.3.6.1.4.1.25506.2.42.1.5.2.1.11 | Integer32 | RO | |
column · Integer32 · read-only · current The average delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true. | ||||
| Chh3cOnuLinkTestResultMaxDelay | 1.3.6.1.4.1.25506.2.42.1.5.2.1.12 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum delay time in TQ units, which corresponds to the difference between sent and received times (including granting delay and firmware processing time overheads). It's invalid if the field 'hh3cOnuLinkTestDelay' is set to be true. | ||||
| Thh3cOnuBandWidthTable | 1.3.6.1.4.1.25506.2.42.1.5.3 | NA | ||
table · not-accessible · current Set bandwidth policy parameters(restrictions)for a LLID (only for the ONU). Default policies are set to disable. Policy parameters will be erased upon LLID network disconnection. | ||||
| Rhh3cOnuBandWidthEntry | 1.3.6.1.4.1.25506.2.42.1.5.3.1 | NA | ||
| Chh3cOnuDownStreamBandWidthPolicy | 1.3.6.1.4.1.25506.2.42.1.5.3.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing. | ||||
| Chh3cOnuDownStreamMaxBandWidth | 1.3.6.1.4.1.25506.2.42.1.5.3.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Maximum bandwidth allowed for the ONU, measured in Kbits/Sec. | ||||
| Chh3cOnuDownStreamMaxBurstSize | 1.3.6.1.4.1.25506.2.42.1.5.3.1.3 | Integer32 (0..8388480) | RW | |
column · Integer32 (0..8388480) · read-write · current Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes. | ||||
| Chh3cOnuDownStreamHighPriorityFirst | 1.3.6.1.4.1.25506.2.42.1.5.3.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable high priority frames preference. false:Disable high priority frames preference. | ||||
| Chh3cOnuDownStreamShortFrameFirst | 1.3.6.1.4.1.25506.2.42.1.5.3.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable short frames preference. false:Disable short frames preference. | ||||
| Chh3cOnuP2PBandWidthPolicy | 1.3.6.1.4.1.25506.2.42.1.5.3.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable static bandwidth configuration policing. false:Disable static bandwidth configuration policing. | ||||
| Chh3cOnuP2PMaxBandWidth | 1.3.6.1.4.1.25506.2.42.1.5.3.1.7 | Integer32 (0..1000000) | RW | |
column · Integer32 (0..1000000) · read-write · current Maximum bandwidth allowed for the ONU, measured in Kbits/Sec. | ||||
| Chh3cOnuP2PMaxBurstSize | 1.3.6.1.4.1.25506.2.42.1.5.3.1.8 | Integer32 (0..8388480) | RW | |
column · Integer32 (0..8388480) · read-write · current Maximal number of bytes in a burst. The value is truncated to the nearest smaller 128 bytes multiple value, measured in bytes. | ||||
| Chh3cOnuP2PHighPriorityFirst | 1.3.6.1.4.1.25506.2.42.1.5.3.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable high priority frames preference. false:Disable high priority frames preference. | ||||
| Chh3cOnuP2PShortFrameFirst | 1.3.6.1.4.1.25506.2.42.1.5.3.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current true:Enable short frames preference. false:Disable short frames preference. | ||||
| Thh3cOnuSlaManTable | 1.3.6.1.4.1.25506.2.42.1.5.4 | NA | ||
table · not-accessible · current Two types of DBA algorithm are supported in the ONU. The internal SLA based algorithm is always activated. This table defines the primary parameter about the internal SLA algorithm. | ||||
| Rhh3cOnuSlaManEntry | 1.3.6.1.4.1.25506.2.42.1.5.4.1 | NA | ||
| Chh3cOnuSlaMaxBandWidth | 1.3.6.1.4.1.25506.2.42.1.5.4.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current Maximum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The minimum bandwidth should not be larger than the maximum bandwidth. | ||||
| Chh3cOnuSlaMinBandWidth | 1.3.6.1.4.1.25506.2.42.1.5.4.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Minimum bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. The maximum bandwidth should be larger than the minimum bandwidth. | ||||
| Chh3cOnuSlaBandWidthStepVal | 1.3.6.1.4.1.25506.2.42.1.5.4.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Granularity of bandwidth - measured in Kbit/s. The value of hh3cOnuSlaMaxBandWidth and hh3cOnuSlaMinBandWidth should be the multiple of the value of this object. | ||||
| Chh3cOnuSlaDelay | 1.3.6.1.4.1.25506.2.42.1.5.4.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current low - low delay. high - high delay. The delay constraint of a specific ONU. Set to high may improve the bandwidth usage at the cost of delay.
| ||||
| Chh3cOnuSlaFixedBandWidth | 1.3.6.1.4.1.25506.2.42.1.5.4.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current Fixed bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cOnuSlaBandWidthStepVal. | ||||
| Chh3cOnuSlaPriorityClass | 1.3.6.1.4.1.25506.2.42.1.5.4.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Precedence of this flow over others in case of contention. 0 is the lowest priority and 7 is the highest priority. | ||||
| Chh3cOnuSlaFixedPacketSize | 1.3.6.1.4.1.25506.2.42.1.5.4.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Fixed packet size - measured in byte. The value of this object should be valid when hh3cOnuSlaFixedBandWidth is configured. | ||||
| Chh3cOnuSlaWrrBandWidth | 1.3.6.1.4.1.25506.2.42.1.5.4.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current The WRR weight will be used to compute the remaining bandwidth allocation after each CIR has been guaranteed. | ||||
| Thh3cOnuInfoTable | 1.3.6.1.4.1.25506.2.42.1.5.5 | NA | ||
table · not-accessible · current Primary status of the specified ONU. There will be one row in this table for each information in the system. (1)Software and hardware versions of the specified ONU (hh3cOnuHardMajorVersion, hh3cOnuHardMinorVersion, hh3cOnuUniMacType) (2)Several physical capabilities of the ONU. (hh3cOnuLaserOnTime, hh3cOnuLaserOffTime, hh3cOnuGrantFifoDep.) (3)The operation(activation) status of the ONU. (hh3cOnuWorkMode) | ||||
| Rhh3cOnuInfoEntry | 1.3.6.1.4.1.25506.2.42.1.5.5.1 | NA | ||
| Chh3cOnuHardMajorVersion | 1.3.6.1.4.1.25506.2.42.1.5.5.1.1 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU hardware major version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cOnuHardMinorVersion | 1.3.6.1.4.1.25506.2.42.1.5.5.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU hardware minor version. If the object length is zero, it means the version is unknown. | ||||
| Chh3cOnuSoftwareVersion | 1.3.6.1.4.1.25506.2.42.1.5.5.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU software version. | ||||
| Chh3cOnuUniMacType | 1.3.6.1.4.1.25506.2.42.1.5.5.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current ONU User Network Interface(UNI) port MAC type.
| ||||
| Chh3cOnuLaserOnTime | 1.3.6.1.4.1.25506.2.42.1.5.5.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The ONU laser on time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOnTime is unknown. | ||||
| Chh3cOnuLaserOffTime | 1.3.6.1.4.1.25506.2.42.1.5.5.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The ONU laser off time measured in TQ units. If the object value is 0x7FFFFFFF, it means hh3cOnuLaserOffTime is unknown. | ||||
| Chh3cOnuGrantFifoDep | 1.3.6.1.4.1.25506.2.42.1.5.5.1.7 | Integer32 (1..255 | 2147483647) | RO | |
column · Integer32 (1..255 | 2147483647) · read-only · current Maximal number of grant records an ONU can store, relevant to ONU only. range: 1 - 255. 0x7FFFFFFF: unknown value. | ||||
| Chh3cOnuWorkMode | 1.3.6.1.4.1.25506.2.42.1.5.5.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The operation(activation) mode of an ONU. other(1) - ONU is in another mode. on(2) - ONU is registered and authorized to the network. In this mode it works as a media converter. pending(3) - ONU has been registered to the PON, but not authorized to the network. off(4) - ONU is not registered to the network.
| ||||
| Chh3cOnuPCBVersion | 1.3.6.1.4.1.25506.2.42.1.5.5.1.9 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU PCB version. | ||||
| Chh3cOnuRtt | 1.3.6.1.4.1.25506.2.42.1.5.5.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The signal round-trip-time(RTT) received. | ||||
| Chh3cOnuEEPROMVersion | 1.3.6.1.4.1.25506.2.42.1.5.5.1.11 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU EEPROM version. | ||||
| Chh3cOnuRegType | 1.3.6.1.4.1.25506.2.42.1.5.5.1.12 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU registered type. | ||||
| Chh3cOnuHostType | 1.3.6.1.4.1.25506.2.42.1.5.5.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU host type. | ||||
| Chh3cOnuDistance | 1.3.6.1.4.1.25506.2.42.1.5.5.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current The distance between OLT and ONU, measured in meter. | ||||
| Chh3cOnuLlid | 1.3.6.1.4.1.25506.2.42.1.5.5.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current The link layer identifier, which uniquely identifies the ONU of a specific OLT. | ||||
| Chh3cOnuVendorId | 1.3.6.1.4.1.25506.2.42.1.5.5.1.16 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU vendor ID. | ||||
| Chh3cOnuFirmwareVersion | 1.3.6.1.4.1.25506.2.42.1.5.5.1.17 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current ONU firmware version. | ||||
| Chh3cOnuOpticalPowerReceivedByOlt | 1.3.6.1.4.1.25506.2.42.1.5.5.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current The burst ONU optical power received by OLT, and when the ONU status is up the value is usable. It measured in 0.01 dBm unit. | ||||
| Chh3cOnuInfoMac | 1.3.6.1.4.1.25506.2.42.1.5.5.1.19 | MacAddress | RO | |
column · MacAddress · read-only · current ONU's MAC. | ||||
| Chh3cOnuInfoLoid | 1.3.6.1.4.1.25506.2.42.1.5.5.1.20 | OCTET STRING (SIZE (0..24)) | RO | |
column · OCTET STRING (SIZE (0..24)) · read-only · current ONU's LOID. | ||||
| Thh3cOnuMacAddrInfoTable | 1.3.6.1.4.1.25506.2.42.1.5.6 | NA | ||
table · not-accessible · current This table used for getting MAC address information of ONU. | ||||
| Rhh3cOnuMacAddrInfoEntry | 1.3.6.1.4.1.25506.2.42.1.5.6.1 | NA | ||
row · not-accessible · current The entry of the hh3cEponOnuMacAddrInfoTable.
| ||||
| Chh3cOnuMacIndex | 1.3.6.1.4.1.25506.2.42.1.5.6.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of ONUs in one OLT. | ||||
| Chh3cOnuMacAddrFlag | 1.3.6.1.4.1.25506.2.42.1.5.6.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The flag of ONU status. 1 - bound: The ONU is bound but not registered. 2 - registered: The ONU is registered but not bound. 3 - run: The ONU is registered and bound on one OLT. 4 - regIncorrect: The ONU is bound on one OLT and registered on another OLT.
| ||||
| Chh3cOnuMacAddress | 1.3.6.1.4.1.25506.2.42.1.5.6.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of ONU. | ||||
| Thh3cOnuBindMacAddrTable | 1.3.6.1.4.1.25506.2.42.1.5.7 | NA | ||
table · not-accessible · current This table implements the following functions for ONUs: Bind MAC of ONU. | ||||
| Rhh3cOnuBindMacAddrEntry | 1.3.6.1.4.1.25506.2.42.1.5.7.1 | NA | ||
| Chh3cOnuBindMacAddress | 1.3.6.1.4.1.25506.2.42.1.5.7.1.1 | MacAddress | RW | |
column · MacAddress · read-write · current Bind the MAC of ONU. While the MAC is not bound, the ONU can not go into effect and configurations can not be set. Set 0-0-0 (MAC address) to the EPON device port will unbind the relationship with the original MAC and configurations will be set to default values. | ||||
| Chh3cOnuBindType | 1.3.6.1.4.1.25506.2.42.1.5.7.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Set the binding type with the ONU which is confined to the index of hh3cEponOnuTypeDescr. | ||||
| Chh3cOnuBindLoid | 1.3.6.1.4.1.25506.2.42.1.5.7.1.3 | OCTET STRING (SIZE (0..24)) | RW | |
column · OCTET STRING (SIZE (0..24)) · read-write · current Bind the LOID of ONU. While the LOID is not bound, the ONU can not go into effect and configurations can not be set. | ||||
| Chh3cOnuBindPassword | 1.3.6.1.4.1.25506.2.42.1.5.7.1.4 | OCTET STRING (SIZE (0..12)) | RW | |
column · OCTET STRING (SIZE (0..12)) · read-write · current The password of LOID by using LOID-PASSWORD binding type to bind ONU. A zero-length string will be returned when reading. | ||||
| Thh3cOnuFirmwareUpdateTable | 1.3.6.1.4.1.25506.2.42.1.5.8 | NA | ||
table · not-accessible · current This table implements the following functions for ONUs: 1. Update the ONU firmware. 2. Result of update ONU firmware. | ||||
| Rhh3cOnuFirmwareUpdateEntry | 1.3.6.1.4.1.25506.2.42.1.5.8.1 | NA | ||
| Chh3cOnuUpdate | 1.3.6.1.4.1.25506.2.42.1.5.8.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current update(1): Update the ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
| ||||
| Chh3cOnuUpdateResult | 1.3.6.1.4.1.25506.2.42.1.5.8.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The ONU firmware update result. updating - The ONU is updating firmware right now. ok - The ONU update result is OK. fail - The ONU update result is fail. fileNotExist - The ONU update failed because the file does not exist. notSetFilename - The ONU firmware filename is not set. fileNotMatchONU - The ONU firmware does not match the ONU. timeout - The ONU responses timeout. otherError - The ONU update result is unknown.
| ||||
| Chh3cOnuUpdateFileName | 1.3.6.1.4.1.25506.2.42.1.5.8.1.3 | OCTET STRING (SIZE (0..255)) | RW | |
column · OCTET STRING (SIZE (0..255)) · read-write · current The filename of the ONU firmware to be updated. Note that the filename must contain the file path. | ||||
| Chh3cOnuUpdateProtType | 1.3.6.1.4.1.25506.2.42.1.5.8.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current private(0): Using private protocol to update the ONU firmware. ctc(1): Using ctc standard protocol to update the ONU firmware.
| ||||
| Chh3cOnuUpdateStartTime | 1.3.6.1.4.1.25506.2.42.1.5.8.1.5 | OCTET STRING (SIZE (0..5)) | RW | |
column · OCTET STRING (SIZE (0..5)) · read-write · current The start time of the ONU update every day. Using HH:MM as format. | ||||
| Chh3cOnuUpdateDuration | 1.3.6.1.4.1.25506.2.42.1.5.8.1.6 | Integer32 (0..1439) | RW | |
column · Integer32 (0..1439) · read-write · current The duration of the ONU update. | ||||
| Shh3cOnuLinkTestFrameNumMinVal | 1.3.6.1.4.1.25506.2.42.1.5.9 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum. | ||||
| Shh3cOnuLinkTestFrameNumMaxVal | 1.3.6.1.4.1.25506.2.42.1.5.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of measurement frames which is confined to hh3cOnuLinkTestFrameNum. | ||||
| Shh3cOnuSlaMaxBandWidthMinVal | 1.3.6.1.4.1.25506.2.42.1.5.11 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth. | ||||
| Shh3cOnuSlaMaxBandWidthMaxVal | 1.3.6.1.4.1.25506.2.42.1.5.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth. | ||||
| Shh3cOnuSlaMinBandWidthMinVal | 1.3.6.1.4.1.25506.2.42.1.5.13 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth. | ||||
| Shh3cOnuSlaMinBandWidthMaxVal | 1.3.6.1.4.1.25506.2.42.1.5.14 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth. | ||||
| Thh3cEponOnuTypeManTable | 1.3.6.1.4.1.25506.2.42.1.5.15 | NA | ||
table · not-accessible · current This table is used for getting ONU bind type in current version. | ||||
| Rhh3cEponOnuTypeManEntry | 1.3.6.1.4.1.25506.2.42.1.5.15.1 | NA | ||
| Chh3cEponOnuTypeIndex | 1.3.6.1.4.1.25506.2.42.1.5.15.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ONU type index. | ||||
| Chh3cEponOnuTypeDescr | 1.3.6.1.4.1.25506.2.42.1.5.15.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The ONU type description which can be used to bind ONU in current version. the value of hh3cOnuBindType can be configured by the index of hh3cEponOnuTypeDescr. | ||||
| Thh3cOnuPacketManTable | 1.3.6.1.4.1.25506.2.42.1.5.16 | NA | ||
table · not-accessible · current This table implements the following functions: (1)Manage packet priority trust mode. (2)Manage packet queue-scheduler mode. | ||||
| Rhh3cOnuPacketManEntry | 1.3.6.1.4.1.25506.2.42.1.5.16.1 | NA | ||
| Chh3cOnuPriorityTrust | 1.3.6.1.4.1.25506.2.42.1.5.16.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The QOS mode which is assigned on ONU. dscp - The service dscp of politic Priority. ipprecedence - The service IP precedence of politic Priority. cos - The service cos of politic Priority.
| ||||
| Chh3cOnuQueueScheduler | 1.3.6.1.4.1.25506.2.42.1.5.16.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The packet queue-scheduler mode which is assigned on ONU. spq - strict priority queuing. wfq - specifies the weights for weighted round-robin queuing.
| ||||
| Thh3cOnuProtocolTable | 1.3.6.1.4.1.25506.2.42.1.5.17 | NA | ||
table · not-accessible · current This table implements the following functions: (1)Manage STP status. (2)Manage IGMP-snooping. (3)Manage DHCP-snooping. | ||||
| Rhh3cOnuProtocolEntry | 1.3.6.1.4.1.25506.2.42.1.5.17.1 | NA | ||
| Chh3cOnuStpStatus | 1.3.6.1.4.1.25506.2.42.1.5.17.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - STP status enable on ONU. false(2) - STP status disable on ONU. | ||||
| Chh3cOnuIgmpSnoopingStatus | 1.3.6.1.4.1.25506.2.42.1.5.17.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - IGMP snooping status enable on ONU. false(2) - IGMP snooping status disable on ONU. | ||||
| Chh3cOnuDhcpsnoopingOption82 | 1.3.6.1.4.1.25506.2.42.1.5.17.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - DHCP snooping Option 82 status enable on ONU. false(2) - DHCP snooping Option 82 status disable on ONU. | ||||
| Chh3cOnuDhcpsnooping | 1.3.6.1.4.1.25506.2.42.1.5.17.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - DHCP snooping status enable on ONU. false(2) - DHCP snooping status disable on ONU. | ||||
| Chh3cOnuPppoe | 1.3.6.1.4.1.25506.2.42.1.5.17.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - PPPOE status enable on ONU. false(2) - PPPOE status disable on ONU. | ||||
| Chh3cOnuIgmpSnoopingHostAgingT | 1.3.6.1.4.1.25506.2.42.1.5.17.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current Set the host aging time of IGMP on ONU. | ||||
| Chh3cOnuIgmpSnoopingMaxRespT | 1.3.6.1.4.1.25506.2.42.1.5.17.1.7 | Integer32 | RW | |
column · Integer32 · read-write · current Set the max response time of IGMP on ONU. | ||||
| Chh3cOnuIgmpSnoopingRouterAgingT | 1.3.6.1.4.1.25506.2.42.1.5.17.1.8 | Integer32 | RW | |
column · Integer32 · read-write · current Set the router aging time of IGMP on ONU. | ||||
| Chh3cOnuIgmpSnoopingAggReportS | 1.3.6.1.4.1.25506.2.42.1.5.17.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - Igmp snooping aggregation report status enable on ONU. false(2) - Igmp snooping aggregation report status disable on ONU. | ||||
| Chh3cOnuIgmpSnoopingAggLeaveS | 1.3.6.1.4.1.25506.2.42.1.5.17.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - Igmp snooping aggregation leave status enable on ONU. false(2) - Igmp snooping aggregation leave status disable on ONU. | ||||
| Thh3cOnuDot1xTable | 1.3.6.1.4.1.25506.2.42.1.5.18 | NA | ||
table · not-accessible · current This table implements the following functions: (1)Manage 802.1x account. (2)Manage 802.1x password. ONU will be authorized to send and receive frames when the account and the password are all right, otherwise this ONU will be unavailable. | ||||
| Rhh3cOnuDot1xEntry | 1.3.6.1.4.1.25506.2.42.1.5.18.1 | NA | ||
| Chh3cOnuDot1xAccount | 1.3.6.1.4.1.25506.2.42.1.5.18.1.1 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current ONU 802.1X account. The object value cannot be set as 'a', 'al' or 'all'. The object should be set together with hh3cOnuDot1xPassword. | ||||
| Chh3cOnuDot1xPassword | 1.3.6.1.4.1.25506.2.42.1.5.18.1.2 | OCTET STRING | RW | |
column · OCTET STRING · read-write · current ONU 802.1X password. The object should be set together with hh3cOnuDot1xAccount. | ||||
| Thh3cOnuPriorityQueueTable | 1.3.6.1.4.1.25506.2.42.1.5.19 | NA | ||
table · not-accessible · current This table contains specific information of priority queue. | ||||
| Rhh3cOnuPriorityQueueEntry | 1.3.6.1.4.1.25506.2.42.1.5.19.1 | NA | ||
row · not-accessible · current The entry of hh3cOnuPriorityQueueTable. | ||||
| Chh3cOnuQueueDirection | 1.3.6.1.4.1.25506.2.42.1.5.19.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The direction of priority queue.
| ||||
| Chh3cOnuQueueId | 1.3.6.1.4.1.25506.2.42.1.5.19.1.2 | Integer32 (0..7) | NA | |
column · Integer32 (0..7) · not-accessible · current The queue ID of priority queue. | ||||
| Chh3cOnuQueueSize | 1.3.6.1.4.1.25506.2.42.1.5.19.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The size of priority queue, measured in percent. The total length of all priority queues is a constant, by default, it is assigned to all of the priority queues evenly. The length of each priority queue may be changed by changing the value of hh3cOnuPriorityQueueSize. The total size of the inbound or outbound priority queues should be not more than 100. | ||||
| Thh3cOnuCountTable | 1.3.6.1.4.1.25506.2.42.1.5.20 | NA | ||
table · not-accessible · current This table contains statistics of ONU port. | ||||
| Rhh3cOnuCountEntry | 1.3.6.1.4.1.25506.2.42.1.5.20.1 | NA | ||
| Chh3cOnuInCRCErrPkts | 1.3.6.1.4.1.25506.2.42.1.5.20.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames received with bad CRC checksum. | ||||
| Chh3cOnuOutDroppedFrames | 1.3.6.1.4.1.25506.2.42.1.5.20.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The total number of frames dropped because of buffer failure. | ||||
| Nhh3cEponOnuScalarGroup | 1.3.6.1.4.1.25506.2.42.1.5.21 | |||
| Shh3cOnuPriorityQueueSizeMinVal | 1.3.6.1.4.1.25506.2.42.1.5.21.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of queue size which is confined to hh3cOnuQueueSize. | ||||
| Shh3cOnuPriorityQueueSizeMaxVal | 1.3.6.1.4.1.25506.2.42.1.5.21.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of queue size which is confined to hh3cOnuQueueSize. | ||||
| Shh3cOnuPriorityQueueBandwidthMinVal | 1.3.6.1.4.1.25506.2.42.1.5.21.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of hh3cOnuQueueMaxBandwidth. | ||||
| Shh3cOnuPriorityQueueBandwidthMaxVal | 1.3.6.1.4.1.25506.2.42.1.5.21.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of hh3cOnuQueueMaxBandwidth. | ||||
| Shh3cOnuPriorityQueueBurstsizeMinVal | 1.3.6.1.4.1.25506.2.42.1.5.21.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of hh3cOnuQueueMaxBurstsize. | ||||
| Shh3cOnuPriorityQueueBurstsizeMaxVal | 1.3.6.1.4.1.25506.2.42.1.5.21.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of hh3cOnuQueueMaxBurstsize. | ||||
| Shh3cOnuUpdateByTypeNextIndex | 1.3.6.1.4.1.25506.2.42.1.5.21.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Offer a free index of hh3cOnuFirmwareUpdateByTypeTable. | ||||
| Thh3cOnuQueueBandwidthTable | 1.3.6.1.4.1.25506.2.42.1.5.22 | NA | ||
table · not-accessible · current This table contains specific bandwidth information of ONU priority queue. | ||||
| Rhh3cOnuQueueBandwidthEntry | 1.3.6.1.4.1.25506.2.42.1.5.22.1 | NA | ||
row · not-accessible · current The entry of hh3cOnuQueueBandwidthTable. | ||||
| Chh3cOnuQueueMaxBandwidth | 1.3.6.1.4.1.25506.2.42.1.5.22.1.1 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum bandwidth of specific ONU priority queue, measured in 100Kbps. | ||||
| Chh3cOnuQueueMaxBurstsize | 1.3.6.1.4.1.25506.2.42.1.5.22.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The maximum burst size of specific ONU priority queue, measured in 64Bytes. | ||||
| Chh3cOnuQueuePolicyStatus | 1.3.6.1.4.1.25506.2.42.1.5.22.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current true - enable bandwidth policy false - disable bandwidth policy The bandwidth administrative status of specific ONU priority queue. | ||||
| Thh3cOnuIpAddressTable | 1.3.6.1.4.1.25506.2.42.1.5.23 | NA | ||
table · not-accessible · current ONU IP address table. | ||||
| Rhh3cOnuIpAddressEntry | 1.3.6.1.4.1.25506.2.42.1.5.23.1 | NA | ||
| Chh3cOnuIpAddress | 1.3.6.1.4.1.25506.2.42.1.5.23.1.1 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address assigned to the ONU. | ||||
| Chh3cOnuIpAddressMask | 1.3.6.1.4.1.25506.2.42.1.5.23.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The mask of IP address denoted by hh3cOnuIpAddress. | ||||
| Chh3cOnuIpAddressGateway | 1.3.6.1.4.1.25506.2.42.1.5.23.1.3 | IpAddress | RW | |
column · IpAddress · read-write · current The gateway of IP address denoted by hh3cOnuIpAddress. | ||||
| Chh3cOnuDhcpallocate | 1.3.6.1.4.1.25506.2.42.1.5.23.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current true(1) - ONU auto allocate IP address status enable. false(2) - ONU auto allocate IP address status disable. | ||||
| Chh3cOnuManageVID | 1.3.6.1.4.1.25506.2.42.1.5.23.1.5 | Integer32 | RW | |
column · Integer32 · read-write · current The management VLAN of ONU denoted by hh3cOnuManageVID. | ||||
| Chh3cOnuManageVlanIntfS | 1.3.6.1.4.1.25506.2.42.1.5.23.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current The management interface status of ONU denoted by hh3cOnuManageVlanIntfS. | ||||
| Thh3cOnuChipSetInfoTable | 1.3.6.1.4.1.25506.2.42.1.5.24 | NA | ||
table · not-accessible · current ONU vendor specific information of ONU. | ||||
| Rhh3cOnuChipSetInfoEntry | 1.3.6.1.4.1.25506.2.42.1.5.24.1 | NA | ||
| Chh3cOnuChipSetVendorId | 1.3.6.1.4.1.25506.2.42.1.5.24.1.1 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current Chipset vendor ID, which identifies the ONU's PON chip vendor according JEDEC ID code. | ||||
| Chh3cOnuChipSetModel | 1.3.6.1.4.1.25506.2.42.1.5.24.1.2 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current Chip model, numbering(range from 0 to 0xFF) by the chip vendor. | ||||
| Chh3cOnuChipSetRevision | 1.3.6.1.4.1.25506.2.42.1.5.24.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Chip revision. | ||||
| Chh3cOnuChipSetDesignDate | 1.3.6.1.4.1.25506.2.42.1.5.24.1.4 | DateAndTime | RO | |
column · DateAndTime · read-only · current Chip design date. | ||||
| Thh3cOnuCapabilityTable | 1.3.6.1.4.1.25506.2.42.1.5.25 | NA | ||
table · not-accessible · current Capability of ONU. | ||||
| Rhh3cOnuCapabilityEntry | 1.3.6.1.4.1.25506.2.42.1.5.25.1 | NA | ||
| Chh3cOnuServiceSupported | 1.3.6.1.4.1.25506.2.42.1.5.25.1.1 | Bits | RO | |
column · Bits · read-only · current Services types supported by the ONU. These functional groups can be supported independently. geinterfacesupport - supporting (1)/not supporting(0) Gbit Ethernet GE interface. feinterfacesupport - supporting (1)/not supporting(0) 100M Ethernet FE interface.(maximum rate is 100M, without GEinterface) voipservicesupport - supporting (1)/not supporting(0)VoIP service. tdmservicesupport - supporting (1)/not supporting(0)TDM CES service.
| ||||
| Chh3cOnuGEPortNumber | 1.3.6.1.4.1.25506.2.42.1.5.25.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The current gigabit ethernet ports number supported by the ONU. | ||||
| Chh3cOnuFEPortNumber | 1.3.6.1.4.1.25506.2.42.1.5.25.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current the current fast ethernet ports number supported by the ONU. | ||||
| Chh3cOnuPOTSPortNumber | 1.3.6.1.4.1.25506.2.42.1.5.25.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The current POTS ports number supported by the ONU | ||||
| Chh3cOnuE1PortsNumber | 1.3.6.1.4.1.25506.2.42.1.5.25.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The current E1 ports number supported by the ONU. | ||||
| Chh3cOnuUpstreamQueueNumber | 1.3.6.1.4.1.25506.2.42.1.5.25.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The number of upstream queues supported by the ONU. | ||||
| Chh3cOnuMaxUpstreamQueuePerPort | 1.3.6.1.4.1.25506.2.42.1.5.25.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The number of maximum upstream queues per port of the ONU. | ||||
| Chh3cOnuDownstreamQueueNumber | 1.3.6.1.4.1.25506.2.42.1.5.25.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The number of downstream queues supported by the ONU. | ||||
| Chh3cOnuMaxDownstreamQueuePerPort | 1.3.6.1.4.1.25506.2.42.1.5.25.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The number of maximum downstream queues per port of the ONU. | ||||
| Chh3cOnuBatteryBackup | 1.3.6.1.4.1.25506.2.42.1.5.25.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current true(1) - ONU supports a reserve battery. false(2) - ONU does not support a reserve battery. | ||||
| Chh3cOnuIgspFastLeaveSupported | 1.3.6.1.4.1.25506.2.42.1.5.25.1.11 | TruthValue | RO | |
column · TruthValue · read-only · current true(1) - ONU supports fast leave in igsp mode. false(2) - ONU does not support fast leave in igsp mode. | ||||
| Chh3cOnuMCtrlFastLeaveSupported | 1.3.6.1.4.1.25506.2.42.1.5.25.1.12 | TruthValue | RO | |
column · TruthValue · read-only · current true(1) - ONU supports fast leave in multicast control mode. false(2) - ONU does not support fast leave in multicast control mode. | ||||
| Chh3cOnuType | 1.3.6.1.4.1.25506.2.42.1.5.25.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current ONU type: SFU(0) HGU(1) SBU(2) MDU(3) which is cassette equipment and uses Ethernet access as broadband MDU(4) which is small card equipment and uses Ethernet access as broadband MDU(5) which is small card equipment and uses DSL access as broadband MDU(6) which is middle card equipment and uses DSL access as broadband MDU(7) which is card equipment and can use both Ethernet and DSL access as broadband MTU(8) | ||||
| Chh3cOnuMultiLLID | 1.3.6.1.4.1.25506.2.42.1.5.25.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current (0) - Invalid value. (1) - ONU supports one LLID. other - ONU supports multiple LLIDs. | ||||
| Chh3cOnuProtectionType | 1.3.6.1.4.1.25506.2.42.1.5.25.1.15 | Integer32 | RO | |
column · Integer32 · read-only · current (0) - Not supported. (1) - ONU supports type C optical link protection. (2) - ONU supports type D optical link protection. | ||||
| Chh3cOnuPonIFNum | 1.3.6.1.4.1.25506.2.42.1.5.25.1.16 | Integer32 | RO | |
column · Integer32 · read-only · current (1) - ONU support one PON interface. (2) - ONU support two PON interfaces. | ||||
| Chh3cOnuSlotNum | 1.3.6.1.4.1.25506.2.42.1.5.25.1.17 | Integer32 | RO | |
column · Integer32 · read-only · current The slot number of a card ONU. If the ONU is not card equipment, 0 is returned. | ||||
| Chh3cOnuIPv6Supported | 1.3.6.1.4.1.25506.2.42.1.5.25.1.18 | Integer32 | RO | |
column · Integer32 · read-only · current (0) - ONU supports IPv6. (1) - ONU does not support IPv6. | ||||
| Chh3cOnuPowerSupplyControl | 1.3.6.1.4.1.25506.2.42.1.5.25.1.19 | Integer32 | RO | |
column · Integer32 · read-only · current (0) - ONU does not support ONU power supply control. (1) - ONU supports Tx power supply control only. The Tx and Rx power supply can only be controlled together whereby Rx power supply is also shutdown when Tx power supply is shutdown. (2) - ONU supports both Tx and Rx power supply control. In this case, Tx and Rx power supply can be controlled separately whereby Rx power supply is still on while Tx power supply is shutdown. | ||||
| Chh3cOnuServiceSLA | 1.3.6.1.4.1.25506.2.42.1.5.25.1.20 | Integer32 | RO | |
column · Integer32 · read-only · current (1) - ONU does not support SLA services. (2~8) - ONU supports 2~8 SLA services. | ||||
| Thh3cOnuDbaReportTable | 1.3.6.1.4.1.25506.2.42.1.5.26 | NA | ||
table · not-accessible · current This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames. | ||||
| Rhh3cOnuDbaReportEntry | 1.3.6.1.4.1.25506.2.42.1.5.26.1 | NA | ||
row · not-accessible · current The entry of the table hh3cOnuDbaReportTable. | ||||
| Chh3cOnuDbaReportQueueId | 1.3.6.1.4.1.25506.2.42.1.5.26.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The DBA report queue ID. | ||||
| Chh3cOnuDbaReportThreshold | 1.3.6.1.4.1.25506.2.42.1.5.26.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current The threshold of the DBA report queue. the following is the queue ID and the related default threshold setting. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0 | ||||
| Chh3cOnuDbaReportStatus | 1.3.6.1.4.1.25506.2.42.1.5.26.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current enable -threshold configuration is active for the queue. disable -threshold configuration is not active for the queue.
| ||||
| Thh3cOnuCosToLocalPrecedenceTable | 1.3.6.1.4.1.25506.2.42.1.5.27 | NA | ||
table · not-accessible · current Table of map of the COS to local-precedence. | ||||
| Rhh3cOnuCosToLocalPrecedenceEntry | 1.3.6.1.4.1.25506.2.42.1.5.27.1 | NA | ||
row · not-accessible · current Configuration information of map of the COS to local precedence. | ||||
| Chh3cOnuCosToLocalPrecedenceCosIndex | 1.3.6.1.4.1.25506.2.42.1.5.27.1.1 | Integer32 (0..7) | RO | |
column · Integer32 (0..7) · read-only · current Index of the map, obtains from packet cos value. | ||||
| Chh3cOnuCosToLocalPrecedenceValue | 1.3.6.1.4.1.25506.2.42.1.5.27.1.2 | Integer32 (0..3) | RW | |
column · Integer32 (0..3) · read-write · current Value of local precedence. | ||||
| Thh3cEponOnuStpPortTable | 1.3.6.1.4.1.25506.2.42.1.5.28 | NA | ||
table · not-accessible · current Table of ONU STP ports. | ||||
| Rhh3cEponOnuStpPortEntry | 1.3.6.1.4.1.25506.2.42.1.5.28.1 | NA | ||
row · not-accessible · current Configuration information of ONU STP ports.
| ||||
| Chh3cEponStpPortIndex | 1.3.6.1.4.1.25506.2.42.1.5.28.1.1 | Integer32 (0..144) | AN | |
column · Integer32 (0..144) · accessible-for-notify · current The index of the STP ports. | ||||
| Chh3cEponStpPortDescr | 1.3.6.1.4.1.25506.2.42.1.5.28.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The description of the STP ports. | ||||
| Chh3cEponStpPortState | 1.3.6.1.4.1.25506.2.42.1.5.28.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The current state of the port (i.e. disabled, discarding, learning and forwarding).
| ||||
| Thh3cOnuPhysicalTable | 1.3.6.1.4.1.25506.2.42.1.5.29 | NA | ||
table · not-accessible · current This table is used for getting ONU physical information. | ||||
| Rhh3cOnuPhysicalEntry | 1.3.6.1.4.1.25506.2.42.1.5.29.1 | NA | ||
| Chh3cOnuBridgeMac | 1.3.6.1.4.1.25506.2.42.1.5.29.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current The bridge MAC address of ONU. | ||||
| Chh3cOnuFirstPonMac | 1.3.6.1.4.1.25506.2.42.1.5.29.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of ONU first PON port. | ||||
| Chh3cOnuFirstPonRegState | 1.3.6.1.4.1.25506.2.42.1.5.29.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The register state of ONU first PON port.
| ||||
| Chh3cOnuSecondPonMac | 1.3.6.1.4.1.25506.2.42.1.5.29.1.4 | MacAddress | RO | |
column · MacAddress · read-only · current The MAC address of ONU second PON port. | ||||
| Chh3cOnuSecondPonRegState | 1.3.6.1.4.1.25506.2.42.1.5.29.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The register state of ONU second PON port.
| ||||
| Thh3cOnuSmlkTable | 1.3.6.1.4.1.25506.2.42.1.5.30 | NA | ||
table · not-accessible · current This table is used for getting ONU SMLK information. | ||||
| Rhh3cOnuSmlkEntry | 1.3.6.1.4.1.25506.2.42.1.5.30.1 | NA | ||
| Chh3cOnuSmlkGroupID | 1.3.6.1.4.1.25506.2.42.1.5.30.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current The SMLK group ID of ONU. | ||||
| Chh3cOnuSmlkFirstPonRole | 1.3.6.1.4.1.25506.2.42.1.5.30.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The role of ONU first PON port in a SMLK group.
| ||||
| Chh3cOnuSmlkFirstPonStatus | 1.3.6.1.4.1.25506.2.42.1.5.30.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The transmitting status of ONU first PON port in a SMLK group.
| ||||
| Chh3cOnuSmlkSecondPonRole | 1.3.6.1.4.1.25506.2.42.1.5.30.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The role of ONU second PON port in a SMLK group.
| ||||
| Chh3cOnuSmlkSecondPonStatus | 1.3.6.1.4.1.25506.2.42.1.5.30.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The transmitting status of ONU second PON port in a SMLK group.
| ||||
| Thh3cOnuRS485PropertiesTable | 1.3.6.1.4.1.25506.2.42.1.5.31 | NA | ||
table · not-accessible · current Property table. | ||||
| Rhh3cOnuRS485PropertiesEntry | 1.3.6.1.4.1.25506.2.42.1.5.31.1 | NA | ||
| Chh3cOnuRS485SerialIndex | 1.3.6.1.4.1.25506.2.42.1.5.31.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current The index of serial port. | ||||
| Chh3cOnuRS485BaudRate | 1.3.6.1.4.1.25506.2.42.1.5.31.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The port baud rate.
| ||||
| Chh3cOnuRS485DataBits | 1.3.6.1.4.1.25506.2.42.1.5.31.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The port number of data bits in a character.
| ||||
| Chh3cOnuRS485Parity | 1.3.6.1.4.1.25506.2.42.1.5.31.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current The port sense of a character parity bit.
| ||||
| Chh3cOnuRS485StopBits | 1.3.6.1.4.1.25506.2.42.1.5.31.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The port number of stop bits.
| ||||
| Chh3cOnuRS485FlowControl | 1.3.6.1.4.1.25506.2.42.1.5.31.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current The port type of input flow control. 'none' indicates no flow control at this level. 'hardware' indicates using hardware signals. 'xonOrxoff' indicates using software function.
| ||||
| Chh3cOnuRS485TXOctets | 1.3.6.1.4.1.25506.2.42.1.5.31.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The number of output octets about the port. The unit is byte. | ||||
| Chh3cOnuRS485RXOctets | 1.3.6.1.4.1.25506.2.42.1.5.31.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current The number of input octets about the port. The unit is byte. | ||||
| Chh3cOnuRS485TXErrOctets | 1.3.6.1.4.1.25506.2.42.1.5.31.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current The number of output error octets about the port. The unit is byte. | ||||
| Chh3cOnuRS485RXErrOctets | 1.3.6.1.4.1.25506.2.42.1.5.31.1.10 | Integer32 | RO | |
column · Integer32 · read-only · current The number of input error octets about the port. The unit is byte. | ||||
| Chh3cOnuRS485ResetStatistics | 1.3.6.1.4.1.25506.2.42.1.5.31.1.11 | INTEGER | RW | |
column · INTEGER · read-write · current Reset the counters to zero, including hh3cOnuRS485TXOctets, hh3cOnuRS485RXOctets, hh3cOnuRS485TXErrOctets and hh3cOnuRS485RXErrOctets.
| ||||
| Thh3cOnuRS485SessionSummaryTable | 1.3.6.1.4.1.25506.2.42.1.5.32 | NA | ||
table · not-accessible · current Session summary table. | ||||
| Rhh3cOnuRS485SessionSummaryEntry | 1.3.6.1.4.1.25506.2.42.1.5.32.1 | NA | ||
row · not-accessible · current The entry of session summary table. | ||||
| Chh3cOnuRS485SessionMaxNum | 1.3.6.1.4.1.25506.2.42.1.5.32.1.1 | Integer32 (1..64) | RO | |
column · Integer32 (1..64) · read-only · current The max session number of every serial port which can be supported. | ||||
| Chh3cOnuRS485SessionNextIndex | 1.3.6.1.4.1.25506.2.42.1.5.32.1.2 | Integer32 (0..64) | RO | |
column · Integer32 (0..64) · read-only · current The next valid index used for creating a new session raw. When there is no valid index left, it will return 0. | ||||
| Thh3cOnuRS485SessionTable | 1.3.6.1.4.1.25506.2.42.1.5.33 | NA | ||
table · not-accessible · current RS485 raw session table. Data received from RS485 will be sent to the destination by raw sockets. | ||||
| Rhh3cOnuRS485SessionEntry | 1.3.6.1.4.1.25506.2.42.1.5.33.1 | NA | ||
row · not-accessible · current The entry of session table. | ||||
| Chh3cOnuRS485SessionIndex | 1.3.6.1.4.1.25506.2.42.1.5.33.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current Raw session index. | ||||
| Chh3cOnuRS485SessionType | 1.3.6.1.4.1.25506.2.42.1.5.33.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current The type of a session. A session can use UDP socket, TCP socket as a client, or TCP socket as a server.
| ||||
| Chh3cOnuRS485SessionAddType | 1.3.6.1.4.1.25506.2.42.1.5.33.1.3 | InetAddressType | RC | |
column · InetAddressType · read-create · current This object indicates the transport type of the address contained in hh3cOnuRS485SessionRemoteIP object. | ||||
| Chh3cOnuRS485SessionRemoteIP | 1.3.6.1.4.1.25506.2.42.1.5.33.1.4 | InetAddress | RC | |
column · InetAddress · read-create · current The IP of remote landing. When session type is 'udp', this is the peer IP. When session type is 'tcpClient', this is the server IP. When session type is 'tcpServer', this is invalid. | ||||
| Chh3cOnuRS485SessionRemotePort | 1.3.6.1.4.1.25506.2.42.1.5.33.1.5 | Integer32 (1024..65535) | RC | |
column · Integer32 (1024..65535) · read-create · current The port of remote landing. When session type is 'udp', this is the peer port. When session type is 'tcpClient', this is the server port. When session type is 'tcpServer', this is invalid. | ||||
| Chh3cOnuRS485SessionLocalPort | 1.3.6.1.4.1.25506.2.42.1.5.33.1.6 | Integer32 (1024..65535) | RC | |
column · Integer32 (1024..65535) · read-create · current Local socket port. When session type is 'udp', this is local UDP socket port. When session type is 'tcpClient', this is invalid. When session type is 'tcpServer', this is the local port which will be listened. | ||||
| Chh3cOnuRS485SessionRowStatus | 1.3.6.1.4.1.25506.2.42.1.5.33.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The status used for creating, modifying, and deleting instances of the columnar objects in raw session table. | ||||
| Thh3cOnuRS485SessionErrInfoTable | 1.3.6.1.4.1.25506.2.42.1.5.34 | NA | ||
table · not-accessible · current Error information table. When failed to create a session, error information can be got from this table. | ||||
| Rhh3cOnuRS485SessionErrInfoEntry | 1.3.6.1.4.1.25506.2.42.1.5.34.1 | NA | ||
row · not-accessible · current The entry of error information table. | ||||
| Chh3cOnuRS485SessionErrInfo | 1.3.6.1.4.1.25506.2.42.1.5.34.1.1 | DisplayString | RO | |
column · DisplayString · read-only · current Error information string. When a response with 'noCreeation' for row creation in table hh3cOnuRS485SessionTable, the error reason can be got from this object. | ||||
| Thh3cOnuDbaReport2Table | 1.3.6.1.4.1.25506.2.42.1.5.35 | NA | ||
table · not-accessible · current This table defines the information of DBA(dynamic bandwidth allocation) report threshold contained in the MPCP report frames. | ||||
| Rhh3cOnuDbaReport2Entry | 1.3.6.1.4.1.25506.2.42.1.5.35.1 | NA | ||
row · not-accessible · current The entry of the table hh3cOnuDbaReport2Table. | ||||
| Chh3cOnuDbaReport2QueueSetId | 1.3.6.1.4.1.25506.2.42.1.5.35.1.1 | Integer32 (1..3) | NA | |
column · Integer32 (1..3) · not-accessible · current The DBA report queue set ID. | ||||
| Chh3cOnuDbaReport2QueueId | 1.3.6.1.4.1.25506.2.42.1.5.35.1.2 | Integer32 (1..8) | NA | |
column · Integer32 (1..8) · not-accessible · current The DBA report queue ID. | ||||
| Chh3cOnuDbaReport2Threshold | 1.3.6.1.4.1.25506.2.42.1.5.35.1.3 | Integer32 | RW | |
column · Integer32 · read-write · current The thresholds of the DBA report queue. The following are the queue ID and the related default threshold settings. 1 - 0 2 - 0 3 - 0 4 - 65535 5 - 65535 6 - 0 7 - 0 8 - 0 | ||||
| Chh3cOnuDbaReport2Status | 1.3.6.1.4.1.25506.2.42.1.5.35.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current true -threshold configuration is active for the queue. false -threshold configuration is not active for the queue. | ||||
| Thh3cOnuLoidInfoTable | 1.3.6.1.4.1.25506.2.42.1.5.36 | NA | ||
table · not-accessible · current This table is used for getting LOID information of an ONU. | ||||
| Rhh3cOnuLoidInfoEntry | 1.3.6.1.4.1.25506.2.42.1.5.36.1 | NA | ||
| Chh3cOnuLoidIndex | 1.3.6.1.4.1.25506.2.42.1.5.36.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The index of an ONU in one OLT. | ||||
| Chh3cOnuLoidFlag | 1.3.6.1.4.1.25506.2.42.1.5.36.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The flag of ONU status. 1 - bound: The ONU is bound but not registered. 2 - registered: The ONU is registered but not bound. 3 - run: The ONU is registered and bound on one OLT. 4 - regIncorrect: The ONU is bound on one OLT and registered on another OLT.
| ||||
| Chh3cOnuLoid | 1.3.6.1.4.1.25506.2.42.1.5.36.1.3 | OCTET STRING (SIZE (1..24)) | RO | |
column · OCTET STRING (SIZE (1..24)) · read-only · current The LOID of an ONU. | ||||
| Thh3cOnuStatisticsTable | 1.3.6.1.4.1.25506.2.42.1.5.37 | NA | ||
table · not-accessible · current This table is used for enabling or disabling statistics and setting period of a PON. | ||||
| Rhh3cOnuStatisticsEntry | 1.3.6.1.4.1.25506.2.42.1.5.37.1 | NA | ||
| Chh3cOnuStatisticsPeriodVal | 1.3.6.1.4.1.25506.2.42.1.5.37.1.1 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current PON statistics period value. | ||||
| Chh3cOnuStatisticsEnable | 1.3.6.1.4.1.25506.2.42.1.5.37.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Enable or disable statistics of a PON. true(1) - alarm enable. false(2) - alarm disable. | ||||
| Shh3cOnuSlaMaxBandWidthMinVal10G | 1.3.6.1.4.1.25506.2.42.1.5.38 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth for 10G EPON. | ||||
| Shh3cOnuSlaMaxBandWidthMaxVal10G | 1.3.6.1.4.1.25506.2.42.1.5.39 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of maximum-bandwidth which is confined to hh3cOnuSlaMaxBandWidth for 10G EPON. | ||||
| Shh3cOnuSlaMinBandWidthMinVal10G | 1.3.6.1.4.1.25506.2.42.1.5.40 | Integer32 | RO | |
scalar · Integer32 · read-only · current The lower limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth for 10G EPON. | ||||
| Shh3cOnuSlaMinBandWidthMaxVal10G | 1.3.6.1.4.1.25506.2.42.1.5.41 | Integer32 | RO | |
scalar · Integer32 · read-only · current The upper limit of minimum-bandwidth which is confined to hh3cOnuSlaMinBandWidth for 10G EPON. | ||||
| Thh3cOnuServiceSlaTable | 1.3.6.1.4.1.25506.2.42.1.5.42 | NA | ||
table · not-accessible · current This table is used for setting the service SLA mode and applying the service SLA to an ONU. | ||||
| Rhh3cOnuServiceSlaEntry | 1.3.6.1.4.1.25506.2.42.1.5.42.1 | NA | ||
| Chh3cSlaSchedulingMode | 1.3.6.1.4.1.25506.2.42.1.5.42.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Service SLA scheduling mode.
| ||||
| Chh3cSlaHighPrioBoundary | 1.3.6.1.4.1.25506.2.42.1.5.42.1.2 | Integer32 | RW | |
column · Integer32 · read-write · current Service SLA high priority boundary in SP-WRR mode. | ||||
| Chh3cSlaCycleLength | 1.3.6.1.4.1.25506.2.42.1.5.42.1.3 | Integer32 (200..16777215) | RW | |
column · Integer32 (200..16777215) · read-write · current Service SLA cycle length in time quantums.
| ||||
| Chh3cSlaApply | 1.3.6.1.4.1.25506.2.42.1.5.42.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Apply service SLA configuration. true(1) - Apply. false(2) - Not apply. | ||||
| Thh3cOnuServiceSlaQueTable | 1.3.6.1.4.1.25506.2.42.1.5.43 | NA | ||
table · not-accessible · current This table is used for configuring service SLA queues. | ||||
| Rhh3cOnuServiceSlaQueEntry | 1.3.6.1.4.1.25506.2.42.1.5.43.1 | NA | ||
| Chh3cSlaQueId | 1.3.6.1.4.1.25506.2.42.1.5.43.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Service SLA queue ID. | ||||
| Chh3cSlaQueMode | 1.3.6.1.4.1.25506.2.42.1.5.43.1.2 | INTEGER | RC | |
column · INTEGER · read-create · current Service SLA queue mode.
| ||||
| Chh3cSlaQueWeight | 1.3.6.1.4.1.25506.2.42.1.5.43.1.3 | Integer32 (0..100) | RC | |
column · Integer32 (0..100) · read-create · current Service SLA queue weight in WRR mode. | ||||
| Chh3cSlaQueFixPktSize | 1.3.6.1.4.1.25506.2.42.1.5.43.1.4 | Integer32 (0..2000) | RC | |
column · Integer32 (0..2000) · read-create · current Service SLA queue fixed packet size in bytes.
| ||||
| Chh3cSlaQueFixBandwidth | 1.3.6.1.4.1.25506.2.42.1.5.43.1.5 | Integer32 | RC | |
column · Integer32 · read-create · current Service SLA queue fixed bandwidth in kbps, which will be rounded down to the nearest multiple of 256.
| ||||
| Chh3cSlaQueGuaBandwidth | 1.3.6.1.4.1.25506.2.42.1.5.43.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current Service SLA queue guaranteed bandwidth in kbps, which will be rounded down to the nearest multiple of 256.
| ||||
| Chh3cSlaQueBstBandwidth | 1.3.6.1.4.1.25506.2.42.1.5.43.1.7 | Integer32 | RC | |
column · Integer32 · read-create · current Service SLA queue best effort bandwidth in kbps, which will be rounded down to the nearest multiple of 256.
| ||||
| Chh3cSlaQueRowStatus | 1.3.6.1.4.1.25506.2.42.1.5.43.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. Only active, createAndGo, and destroy are supported. | ||||
| Thh3cOnuPoeTable | 1.3.6.1.4.1.25506.2.42.1.5.44 | NA | ||
table · not-accessible · current This table is used for configuring the PoE function for ONUs. | ||||
| Rhh3cOnuPoeEntry | 1.3.6.1.4.1.25506.2.42.1.5.44.1 | NA | ||
| Chh3cOnuPoeEnable | 1.3.6.1.4.1.25506.2.42.1.5.44.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Enable PoE for an ONU. | ||||
| Chh3cOnuPoeMode | 1.3.6.1.4.1.25506.2.42.1.5.44.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Set the PoE mode for an ONU.
| ||||
| Chh3cOnuPoeMaxPowerClass | 1.3.6.1.4.1.25506.2.42.1.5.44.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Set the PoE max power class for an ONU.
| ||||
| Chh3cOnuPoeMaxPowerValue | 1.3.6.1.4.1.25506.2.42.1.5.44.1.4 | Integer32 | RW | |
column · Integer32 · read-write · current Set the PoE max power value for an ONU.
| ||||
| Chh3cOnuPoeLegacyEnable | 1.3.6.1.4.1.25506.2.42.1.5.44.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Enable the PoE legacy PD detection for an ONU. | ||||
| Nhh3cEponBatchOperationMan | 1.3.6.1.4.1.25506.2.42.1.6 | |||
| Thh3cEponBatchOperationBySlotTable | 1.3.6.1.4.1.25506.2.42.1.6.1 | NA | ||
table · not-accessible · current This table is used for batch operation by slot. | ||||
| Rhh3cEponBatchOperationBySlotEntry | 1.3.6.1.4.1.25506.2.42.1.6.1.1 | NA | ||
row · not-accessible · current The entry of the hh3cEponBatchOperationBySlotTable. | ||||
| Chh3cEponBatchOperationBySlotIndex | 1.3.6.1.4.1.25506.2.42.1.6.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The EPON board index. | ||||
| Chh3cEponBatchOperationBySlotType | 1.3.6.1.4.1.25506.2.42.1.6.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The types of batch operation by slot: 1 - resetUnknown, the object value is not set. 9 - updateDba, update OLT DBA algorithm. Config the MIB object module hh3cEponDbaUpdateFileName. 10 - updateONU, update ONU firmware. Config the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
| ||||
| Chh3cEponBatchOperationBySlot | 1.3.6.1.4.1.25506.2.42.1.6.1.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current Execute batch operation.
| ||||
| Chh3cEponBatchOperationBySlotResult | 1.3.6.1.4.1.25506.2.42.1.6.1.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The result of batch operation. 0xFFFF - other, general error. 1 - working, operation is not completed. 2 - successful, completed successfully. 3 - failed because the DBA source file does not exist. 4 - failed because the ONU firmware file does not exist. 5 - failed because of not set the filename of DBA source. 6 - failed because of not set the filename of ONU firmware. 7 - failed because of not set slottype. | ||||
| Chh3cEponBatchOpBySlotBindType | 1.3.6.1.4.1.25506.2.42.1.6.1.1.5 | Bits | RW | |
column · Bits · read-write · current Set batch binding type, which can only be assigned one type.
| ||||
| Thh3cEponBatchOperationByOLTTable | 1.3.6.1.4.1.25506.2.42.1.6.2 | NA | ||
table · not-accessible · current This table is used for batch operation by OLT. | ||||
| Rhh3cEponBatchOperationByOLTEntry | 1.3.6.1.4.1.25506.2.42.1.6.2.1 | NA | ||
| Chh3cEponBatchOperationByOLTType | 1.3.6.1.4.1.25506.2.42.1.6.2.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current The types of batch operation by OLT(operation for all ONUs in the OLT): 1 -- resetUnknown, the object value is not set. 5 -- updateONU, update ONU firmware. configure the MIB object module hh3cEponOnuUpdateFileName with the filename of ONU firmware first.
| ||||
| Chh3cEponBatchOperationByOLT | 1.3.6.1.4.1.25506.2.42.1.6.2.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Execute batch operation.
| ||||
| Chh3cEponBatchOperationByOLTResult | 1.3.6.1.4.1.25506.2.42.1.6.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current The result of batch operation: 0xFFFF -- other, general error. 1 -- working, operation is not completed. 2 -- successful, operation completed successfully. 4 -- failed because the ONU firmware file does not exist. 6 -- failed because of not set the filename of ONU firmware. 7 -- failed because of not set olttype. | ||||
| Thh3cOnuFirmwareUpdateByTypeTable | 1.3.6.1.4.1.25506.2.42.1.6.3 | NA | ||
table · not-accessible · current This table is used to update ONU by ONU type. | ||||
| Rhh3cOnuFirmwareUpdateByTypeEntry | 1.3.6.1.4.1.25506.2.42.1.6.3.1 | NA | ||
row · not-accessible · current The entry of the hh3cOnuFirmwareUpdateByTypeTable. | ||||
| Chh3cOnuUpdateByOnuTypeIndex | 1.3.6.1.4.1.25506.2.42.1.6.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The type and file relationship table entry index. | ||||
| Chh3cOnuUpdateByTypeOnuType | 1.3.6.1.4.1.25506.2.42.1.6.3.1.2 | OCTET STRING (SIZE (0..15)) | RC | |
column · OCTET STRING (SIZE (0..15)) · read-create · current The type of ONUs. | ||||
| Chh3cOnuUpdateByTypeFileName | 1.3.6.1.4.1.25506.2.42.1.6.3.1.3 | OCTET STRING (SIZE (0..255)) | RC | |
column · OCTET STRING (SIZE (0..255)) · read-create · current The file to be updated for the type of ONUs. | ||||
| Chh3cOnuUpdateByTypeRowStatus | 1.3.6.1.4.1.25506.2.42.1.6.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. Only createAndGo and destroy actions are supported. | ||||
| Chh3cOnuUpdateByTypeProtType | 1.3.6.1.4.1.25506.2.42.1.6.3.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current private(0): Using private protocol to update the ONU firmware. ctc(1): Using ctc standard protocol to update the ONU firmware.
| ||||
| Chh3cOnuUpdateByTypeStartTime | 1.3.6.1.4.1.25506.2.42.1.6.3.1.6 | OCTET STRING (SIZE (0..5)) | RW | |
column · OCTET STRING (SIZE (0..5)) · read-write · current The start time of the ONU update every day. Using HH:MM as format. | ||||
| Chh3cOnuUpdateByTypeDuration | 1.3.6.1.4.1.25506.2.42.1.6.3.1.7 | Integer32 (0..1439) | RW | |
column · Integer32 (0..1439) · read-write · current The duration of the ONU update. | ||||
| Nhh3cEponErrorInfo | 1.3.6.1.4.1.25506.2.42.1.7 | |||
| Shh3cEponSoftwareErrorCode | 1.3.6.1.4.1.25506.2.42.1.7.1 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current OLT software error code. | ||||
| Shh3cOamVendorSpecificAlarmCode | 1.3.6.1.4.1.25506.2.42.1.7.2 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Alarm code of the vendor. | ||||
| Shh3cEponOnuRegErrorMacAddr | 1.3.6.1.4.1.25506.2.42.1.7.3 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The MAC of ONU registered error. | ||||
| Shh3cOamEventLogType | 1.3.6.1.4.1.25506.2.42.1.7.4 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current The type of event that generated this entry in the event log. | ||||
| Shh3cOamEventLogLocation | 1.3.6.1.4.1.25506.2.42.1.7.5 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM.
| ||||
| Shh3cEponLoopbackPortIndex | 1.3.6.1.4.1.25506.2.42.1.7.6 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current The index of port which generate loop back event. | ||||
| Shh3cEponLoopbackPortDescr | 1.3.6.1.4.1.25506.2.42.1.7.7 | OCTET STRING (SIZE (0..255)) | AN | |
scalar · OCTET STRING (SIZE (0..255)) · accessible-for-notify · current A textual string containing information about the port generated loop back event. | ||||
| Shh3cOltPortAlarmLlidMisFrames | 1.3.6.1.4.1.25506.2.42.1.7.8 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current the amount of mismatched frames about the LLID mismatch alarm. | ||||
| Shh3cOltPortAlarmBer | 1.3.6.1.4.1.25506.2.42.1.7.9 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current error bit rate. | ||||
| Shh3cOltPortAlarmFer | 1.3.6.1.4.1.25506.2.42.1.7.10 | Unsigned32 | AN | |
scalar · Unsigned32 · accessible-for-notify · current error frames rate. | ||||
| Shh3cEponOnuRegSilentMac | 1.3.6.1.4.1.25506.2.42.1.7.11 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The MAC of silent ONU. | ||||
| Shh3cEponOperationResult | 1.3.6.1.4.1.25506.2.42.1.7.12 | OCTET STRING (SIZE (0..255)) | AN | |
scalar · OCTET STRING (SIZE (0..255)) · accessible-for-notify · current The result of EPON operation. | ||||
| Shh3cEponOnuLaserState | 1.3.6.1.4.1.25506.2.42.1.7.13 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The state of ONU laser.
| ||||
| Shh3cEponOnuRegSilentBindType | 1.3.6.1.4.1.25506.2.42.1.7.14 | Bits | AN | |
scalar · Bits · accessible-for-notify · current The binding type of a silent ONU.
| ||||
| Shh3cEponOnuRegSilentLoid | 1.3.6.1.4.1.25506.2.42.1.7.15 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The LOID of a silent ONU. | ||||
| Shh3cEponOnuRegSilentLoidPwd | 1.3.6.1.4.1.25506.2.42.1.7.16 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The LOID's password of a silent ONU. A zero-length string will be returned when reading. | ||||
| Shh3cEponOnuRegErrorLoid | 1.3.6.1.4.1.25506.2.42.1.7.17 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current The LOID of an ONU with registration error. | ||||
| Shh3cEponOnuRegErrorLoidCode | 1.3.6.1.4.1.25506.2.42.1.7.18 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current The reason of ONU registration failure.
| ||||
| Nhh3cEponTrap | 1.3.6.1.4.1.25506.2.42.1.8 | |||
| Nhh3cEponTrapPrefix | 1.3.6.1.4.1.25506.2.42.1.8.0 | |||
| !hh3cEponPortAlarmBerTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.1 | |||
notification · current A hh3cEponPortAlarmBerTrap notification is sent when a BER threshold crossing event is detected. | ||||
| !hh3cEponPortAlarmFerTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.2 | |||
notification · current A hh3cEponPortAlarmFerTrap notification is sent when a frame error rate threshold crossing event is detected. | ||||
| !hh3cEponErrorLLIDFrameTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.3 | |||
notification · current A hh3cEponErrorLLIDFrameTrap notification is sent when a LLID mismatched frames rate threshold crossing event is detected. | ||||
| !hh3cEponLoopBackEnableTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.4 | |||
notification · current A hh3cEponLoopBackEnableTrap notification is sent when the loop back command is committed. | ||||
| !hh3cEponOnuRegistrationErrTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.5 | |||
notification · current A hh3cEponOnuRegistrationErrTrap notification is sent when a ONU register failed.
| ||||
| !hh3cEponOamDisconnectionTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.6 | |||
| !hh3cEponEncryptionKeyErrTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.7 | |||
| !hh3cEponRemoteStableTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.8 | |||
| !hh3cEponLocalStableTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.9 | |||
| !hh3cEponOamVendorSpecificTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.10 | |||
notification · current A hh3cEponOamVendorSpecificTrap notification is sent when system vendor specific OAM alarm raised.
| ||||
| !hh3cEponSoftwareErrTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.11 | |||
notification · current A hh3cEponSoftwareErrTrap notification is sent when a PAS-SOFT internal error occurs. | ||||
| !hh3cEponPortAlarmBerRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.12 | |||
notification · current A hh3cEponPortAlarmBerRecoverTrap notification is sent when a BER threshold crossing event is detected and then recovered.
| ||||
| !hh3cEponPortAlarmFerRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.13 | |||
notification · current A hh3cEponPortAlarmFerRecoverTrap notification is sent when a frame error rate threshold crossing event is detected and then recovered.
| ||||
| !hh3cEponErrorLLIDFrameRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.14 | |||
| !hh3cEponLoopBackEnableRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.15 | |||
| !hh3cEponOnuRegistrationErrRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.16 | |||
notification · current A hh3cEponOnuRegistrationErrRecoverTrap notification is sent when an ONU register failed and then register successful again.
| ||||
| !hh3cEponOamDisconnectionRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.17 | |||
| !hh3cEponEncryptionKeyErrRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.18 | |||
| !hh3cEponRemoteStableRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.19 | |||
| !hh3cEponLocalStableRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.20 | |||
| !hh3cEponOamVendorSpecificRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.21 | |||
notification · current A hh3cEponOamVendorSpecificRecoverTrap notification is sent when system vendor specific OAM alarm is detected and then recovered.
| ||||
| !hh3cEponSoftwareErrRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.22 | |||
notification · current A hh3cEponSoftwareErrRecoverTrap notification is sent when a PAS-SOFT internal error is detected and then recovered. | ||||
| !hh3cDot3OamThresholdRecoverEvent | 1.3.6.1.4.1.25506.2.42.1.8.0.23 | |||
notification · current A hh3cDot3OamThresholdRecoverEvent notification is sent when hh3cDot3OamThresholdEvent is detected and then recovered. | ||||
| !hh3cDot3OamNonThresholdRecoverEvent | 1.3.6.1.4.1.25506.2.42.1.8.0.24 | |||
notification · current A hh3cDot3OamNonThresholdRecoverEvent notification is sent when hh3cDot3OamNonThresholdEvent is detected and then recovered. | ||||
| !hh3cEponOnuRegExcessTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.25 | |||
| !hh3cEponOnuRegExcessRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.26 | |||
| !hh3cEponOnuPowerOffTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.27 | |||
| !hh3cEponOltSwitchoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.28 | |||
| !hh3cEponOltDFETrap | 1.3.6.1.4.1.25506.2.42.1.8.0.29 | |||
| !hh3cEponOltDFERecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.30 | |||
| !hh3cEponOnuSilenceTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.31 | |||
notification · current The hh3cEponOnuSilenceTrap notification is sent when an unbound ONU try to register to an OLT.
| ||||
| !hh3cEponOnuSilenceRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.32 | |||
notification · current The hh3cEponOnuSilenceRecoverTrap notification is sent when a silent ONU is bound in the OLT or the aging onu mac address is timeout.
| ||||
| !hh3cEponOnuUpdateResultTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.33 | |||
notification · current A hh3cEponUpdateResultTrap notification is sent when an ONU reported its firmware update result. | ||||
| !hh3cEponOnuAutoBindTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.34 | |||
notification · current A hh3cEponOnuAutoBindTrap notification is sent when a silent ONU is bound automatically. | ||||
| !hh3cEponOnuPortStpStateTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.35 | |||
notification · current A hh3cEponOnuPortStpStateTrap notification is sent when a port turns into another state in STP environment. | ||||
| !hh3cEponOnuLaserFailedTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.36 | |||
notification · current A hh3cEponOnuLaserFailedTrap notification is sent when an ONU has trouble with laser, such as laser constantly turned on, signal degradation or optics EOL (End of Life).
| ||||
| !hh3cOnuSmlkSwitchoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.37 | |||
notification · current A hh3cOnuSmlkSwitchoverTrap notification is sent when an ONU SMLK switchover is detected. | ||||
| !hh3cEponOnuRegLoidErrTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.38 | |||
notification · current A hh3cEponOnuRegLoidErrTrap notification is sent when an ONU failed to register identified by LOID. | ||||
| !hh3cEponOnuRegLoidErrRecTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.39 | |||
notification · current A hh3cEponOnuRegLoidErrRecTrap notification is sent when an ONU failed to register and then registered successful again identified by LOID. | ||||
| !hh3cEponOnuSilenceLoidTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.40 | |||
notification · current The hh3cEponOnuSilenceLoidTrap notification is sent when an unbound ONU try to register to an OLT identified by LOID. | ||||
| !hh3cEponOnuSilenceLoidRecTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.41 | |||
notification · current The hh3cEponOnuSilenceLoidRecTrap notification is sent when a silent ONU is bound in the OLT or the aging ONU MAC address times out identified by LOID. | ||||
| !hh3cEponOnuUpdateLoidRetTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.42 | |||
notification · current A hh3cEponOnuUpdateLoidRetTrap notification is sent when an ONU reported its firmware update result identified by LOID. | ||||
| !hh3cEponOnuAutoBindLoidTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.43 | |||
notification · current A hh3cEponOnuAutoBindLoidTrap notification is sent when a silent ONU is bound automatically identified by LOID.
| ||||
| !hh3cEponOnuPowerOnTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.44 | |||
| !hh3cEponOpticalSignalLosTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.45 | |||
| !hh3cEponOpticalSignalLosRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.46 | |||
| !hh3cEponOnuFiberFailTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.47 | |||
| !hh3cEponOnuFiberFailRecoverTrap | 1.3.6.1.4.1.25506.2.42.1.8.0.48 | |||
| Nhh3cEponStat | 1.3.6.1.4.1.25506.2.42.1.9 | |||
| Thh3cEponStatTable | 1.3.6.1.4.1.25506.2.42.1.9.1 | NA | ||
table · not-accessible · current This table contains line code error statistics of epon port. | ||||
| Rhh3cEponStatEntry | 1.3.6.1.4.1.25506.2.42.1.9.1.1 | NA | ||
| Chh3cEponStatFER | 1.3.6.1.4.1.25506.2.42.1.9.1.1.1 | Counter64 | RO | |
column · Counter64 · read-only · current The frame error rate of epon port, measured in 1e-9 unit. | ||||
| Chh3cEponStatBER | 1.3.6.1.4.1.25506.2.42.1.9.1.1.2 | Counter64 | RO | |
column · Counter64 · read-only · current The bit error rate of epon port, measured in 1e-9 unit. | ||||
| Nhh3cEponRoltMan | 1.3.6.1.4.1.25506.2.42.1.10 | |||
| Thh3cRoltInterfaceTable | 1.3.6.1.4.1.25506.2.42.1.10.1 | NA | ||
table · not-accessible · current The table of redundant OLT interfaces. | ||||
| Rhh3cRoltInterfaceEntry | 1.3.6.1.4.1.25506.2.42.1.10.1.1 | NA | ||
row · not-accessible · current The entry of the table hh3cRoltInterfaceTable. | ||||
| Chh3cRoltInterfaceNumber | 1.3.6.1.4.1.25506.2.42.1.10.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The number of an ROLT interface. | ||||
| Chh3cRoltInterfaceIfIndex | 1.3.6.1.4.1.25506.2.42.1.10.1.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The ifIndex of an ROLT interface. | ||||
| Chh3cRoltInterfaceRowStatus | 1.3.6.1.4.1.25506.2.42.1.10.1.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Create or delete a redundant OLT interface. Now only two operations are supported: createAndGo and destroy. | ||||
| Thh3cRoltMemberTable | 1.3.6.1.4.1.25506.2.42.1.10.2 | NA | ||
table · not-accessible · current This table is used for adding or deleting the OLT member interfaces of an redundant OLT interface. | ||||
| Rhh3cRoltMemberEntry | 1.3.6.1.4.1.25506.2.42.1.10.2.1 | NA | ||
row · not-accessible · current The entry of the table hh3cRoltMemberTable. | ||||
| Chh3cRoltMemberOltIfindex | 1.3.6.1.4.1.25506.2.42.1.10.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ifindex of an OLT interface. | ||||
| Chh3cRoltMemberOltPriority | 1.3.6.1.4.1.25506.2.42.1.10.2.1.2 | Integer32 (1..255) | RC | |
column · Integer32 (1..255) · read-create · current The priority of an OLT interface that will be assigned to an ROLT interface. | ||||
| Chh3cRoltMemberRowStatus | 1.3.6.1.4.1.25506.2.42.1.10.2.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Operation status. Now only two states are supported: createAndGo and destroy. | ||||
| Chh3cRoltMemberForwardStatus | 1.3.6.1.4.1.25506.2.42.1.10.2.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The forwarding status of an OLT member interface. true(1) - Active. false(2) - Inactive. | ||||
Traps / Notifications
- hh3cDot3OamNonThresholdRecoverEvent
1.3.6.1.4.1.25506.2.42.1.8.0.24 - hh3cDot3OamThresholdRecoverEvent
1.3.6.1.4.1.25506.2.42.1.8.0.23 - hh3cEponEncryptionKeyErrRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.18 - hh3cEponEncryptionKeyErrTrap
1.3.6.1.4.1.25506.2.42.1.8.0.7 - hh3cEponErrorLLIDFrameRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.14 - hh3cEponErrorLLIDFrameTrap
1.3.6.1.4.1.25506.2.42.1.8.0.3 - hh3cEponLocalStableRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.20 - hh3cEponLocalStableTrap
1.3.6.1.4.1.25506.2.42.1.8.0.9 - hh3cEponLoopBackEnableRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.15 - hh3cEponLoopBackEnableTrap
1.3.6.1.4.1.25506.2.42.1.8.0.4 - hh3cEponOamDisconnectionRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.17 - hh3cEponOamDisconnectionTrap
1.3.6.1.4.1.25506.2.42.1.8.0.6 - hh3cEponOamVendorSpecificRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.21 - hh3cEponOamVendorSpecificTrap
1.3.6.1.4.1.25506.2.42.1.8.0.10 - hh3cEponOltDFERecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.30 - hh3cEponOltDFETrap
1.3.6.1.4.1.25506.2.42.1.8.0.29 - hh3cEponOltSwitchoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.28 - hh3cEponOnuAutoBindLoidTrap
1.3.6.1.4.1.25506.2.42.1.8.0.43 - hh3cEponOnuAutoBindTrap
1.3.6.1.4.1.25506.2.42.1.8.0.34 - hh3cEponOnuFiberFailRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.48 - hh3cEponOnuFiberFailTrap
1.3.6.1.4.1.25506.2.42.1.8.0.47 - hh3cEponOnuLaserFailedTrap
1.3.6.1.4.1.25506.2.42.1.8.0.36 - hh3cEponOnuPortStpStateTrap
1.3.6.1.4.1.25506.2.42.1.8.0.35 - hh3cEponOnuPowerOffTrap
1.3.6.1.4.1.25506.2.42.1.8.0.27 - hh3cEponOnuPowerOnTrap
1.3.6.1.4.1.25506.2.42.1.8.0.44 - hh3cEponOnuRegExcessRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.26 - hh3cEponOnuRegExcessTrap
1.3.6.1.4.1.25506.2.42.1.8.0.25 - hh3cEponOnuRegLoidErrRecTrap
1.3.6.1.4.1.25506.2.42.1.8.0.39 - hh3cEponOnuRegLoidErrTrap
1.3.6.1.4.1.25506.2.42.1.8.0.38 - hh3cEponOnuRegistrationErrRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.16 - hh3cEponOnuRegistrationErrTrap
1.3.6.1.4.1.25506.2.42.1.8.0.5 - hh3cEponOnuSilenceLoidRecTrap
1.3.6.1.4.1.25506.2.42.1.8.0.41 - hh3cEponOnuSilenceLoidTrap
1.3.6.1.4.1.25506.2.42.1.8.0.40 - hh3cEponOnuSilenceRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.32 - hh3cEponOnuSilenceTrap
1.3.6.1.4.1.25506.2.42.1.8.0.31 - hh3cEponOnuUpdateLoidRetTrap
1.3.6.1.4.1.25506.2.42.1.8.0.42 - hh3cEponOnuUpdateResultTrap
1.3.6.1.4.1.25506.2.42.1.8.0.33 - hh3cEponOpticalSignalLosRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.46 - hh3cEponOpticalSignalLosTrap
1.3.6.1.4.1.25506.2.42.1.8.0.45 - hh3cEponPortAlarmBerRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.12 - hh3cEponPortAlarmBerTrap
1.3.6.1.4.1.25506.2.42.1.8.0.1 - hh3cEponPortAlarmFerRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.13 - hh3cEponPortAlarmFerTrap
1.3.6.1.4.1.25506.2.42.1.8.0.2 - hh3cEponRemoteStableRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.19 - hh3cEponRemoteStableTrap
1.3.6.1.4.1.25506.2.42.1.8.0.8 - hh3cEponSoftwareErrRecoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.22 - hh3cEponSoftwareErrTrap
1.3.6.1.4.1.25506.2.42.1.8.0.11 - hh3cOnuSmlkSwitchoverTrap
1.3.6.1.4.1.25506.2.42.1.8.0.37