HH3C-DSP-MIB
H3CThis MIB is to provide the definition of the DSP(Digital Signal Processing) status.
snmptranslate -m HH3C-DSP-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-DSP-MIB <host> 1.3.6.1.4.1.25506.2.89Imports
| ENTITY-MIB | PhysicalIndex |
|---|---|
| HH3C-OID-MIB | hh3cCommon |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cDSP | 1.3.6.1.4.1.25506.2.89 | |||
identity This MIB is to provide the definition of the DSP(Digital Signal Processing) status. | ||||
| Thh3cVPMStatusTable | 1.3.6.1.4.1.25506.2.89.1 | NA | ||
table · not-accessible · current The table contains status parameters of VPM(Voice Process Module) card. | ||||
| Rhh3cVPMStatusEntry | 1.3.6.1.4.1.25506.2.89.1.1 | NA | ||
| Chh3cVPMIndex | 1.3.6.1.4.1.25506.2.89.1.1.1 | Integer32 (1..64) | AN | |
column · Integer32 (1..64) · accessible-for-notify · current The index for this entry. The sequence of VPM card in the chassis is from the top to bottom. | ||||
| Chh3cVPMEnPhysicalIndex | 1.3.6.1.4.1.25506.2.89.1.1.2 | PhysicalIndex | RO | |
column · PhysicalIndex · read-only · current The object corresponds to PhysicalIndex in the chassis. | ||||
| Chh3cVPMState | 1.3.6.1.4.1.25506.2.89.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need attention. fatal(3) - VPM card is not functional. offLine(4) - VPM card is in off-line maintenance state.
| ||||
| Chh3cVPMResourceUtilization | 1.3.6.1.4.1.25506.2.89.1.1.4 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current The object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handling calls, transcoding, voice compression,...) to the total available DSP resources. | ||||
| Chh3cVPMHiWaterUtilization | 1.3.6.1.4.1.25506.2.89.1.1.5 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current The object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured. | ||||
| Chh3cVPMMaxChannel | 1.3.6.1.4.1.25506.2.89.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum number of channels can be supported in each VPM card. | ||||
| Thh3cDSPStatusTable | 1.3.6.1.4.1.25506.2.89.2 | NA | ||
table · not-accessible · current The table contains status parameters of DSP(Digital Signal Processing) card. | ||||
| Rhh3cDSPStatusEntry | 1.3.6.1.4.1.25506.2.89.2.1 | NA | ||
| Chh3cDSPIndex | 1.3.6.1.4.1.25506.2.89.2.1.1 | Integer32 (1..256) | AN | |
column · Integer32 (1..256) · accessible-for-notify · current The index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left. | ||||
| Chh3cDSPVPMIndex | 1.3.6.1.4.1.25506.2.89.2.1.2 | Integer32 (0..64) | RO | |
column · Integer32 (0..64) · read-only · current The object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this object is 0, then the DSP is fixed in the chassis card. | ||||
| Chh3cDSPEnPhysicalIndex | 1.3.6.1.4.1.25506.2.89.2.1.3 | PhysicalIndex | RO | |
column · PhysicalIndex · read-only · current The object corresponds to PhysicalIndex in the chassis. | ||||
| Chh3cDSPResetTime | 1.3.6.1.4.1.25506.2.89.2.1.4 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime from the last DSP reset occurred. | ||||
| Chh3cDSPMaxChannel | 1.3.6.1.4.1.25506.2.89.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality. | ||||
| Chh3cDSPState | 1.3.6.1.4.1.25506.2.89.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in off-line maintenance state.
| ||||
| Chh3cDSPInUseChannel | 1.3.6.1.4.1.25506.2.89.2.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after the DSP channel is free due to call disconnection. | ||||
| Nhh3cDSPTrap | 1.3.6.1.4.1.25506.2.89.3 | |||
| Nhh3cDSPTrapPrex | 1.3.6.1.4.1.25506.2.89.3.0 | |||
| !hh3cVPMStateChange | 1.3.6.1.4.1.25506.2.89.3.0.1 | |||
notification · current This trap is sent when VPM state changes. | ||||
| !hh3cDSPStateChange | 1.3.6.1.4.1.25506.2.89.3.0.2 | |||
notification · current This trap is sent when DSP state changes. | ||||
Traps / Notifications
- hh3cDSPStateChange
1.3.6.1.4.1.25506.2.89.3.0.2 - hh3cVPMStateChange
1.3.6.1.4.1.25506.2.89.3.0.1