HH3C-DOT11-SA-MIB
H3CThis MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel.
snmptranslate -m HH3C-DOT11-SA-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-DOT11-SA-MIB <host> 1.3.6.1.4.1.25506.2.75.13Imports
| HH3C-DOT11-REF-MIB | Hh3cDot11ChannelScopeType, Hh3cDot11ObjectIDType, Hh3cDot11RadioScopeType, Hh3cDot11SaIntfDevType, hh3cDot11 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cDot11Sa | 1.3.6.1.4.1.25506.2.75.13 | |||
identity This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel. | ||||
| Nhh3cDot11SaCfgGroup | 1.3.6.1.4.1.25506.2.75.13.1 | |||
| Thh3cDot11SaCfgTable | 1.3.6.1.4.1.25506.2.75.13.1.1 | NA | ||
table · not-accessible · current This table is used to configure spectrum analysis. | ||||
| Rhh3cDot11SaCfgEntry | 1.3.6.1.4.1.25506.2.75.13.1.1.1 | NA | ||
row · not-accessible · current This entry contains the spectrum analysis configuration. | ||||
| Chh3cDot11SaCfgRadioType | 1.3.6.1.4.1.25506.2.75.13.1.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current Represents the radio type of the configuration.
| ||||
| Chh3cDot11SaEnable | 1.3.6.1.4.1.25506.2.75.13.1.1.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Represents whether spectrum analysis is enabled globally. | ||||
| Chh3cDot11SaRptDevType | 1.3.6.1.4.1.25506.2.75.13.1.1.1.3 | Bits | RW | |
column · Bits · read-write · current Represents which types of interference devices should be reported.
| ||||
| Chh3cDot11SaTrapDevEnable | 1.3.6.1.4.1.25506.2.75.13.1.1.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Represents whether the interference device trap is enabled. | ||||
| Chh3cDot11SaTrapDevType | 1.3.6.1.4.1.25506.2.75.13.1.1.1.5 | Bits | RW | |
column · Bits · read-write · current Represents which types of interference device will send traps when the interference device trap is enabled.
| ||||
| Chh3cDot11SaTrapAQEnable | 1.3.6.1.4.1.25506.2.75.13.1.1.1.6 | TruthValue | RW | |
column · TruthValue · read-write · current Represents whether the air quality trap is enabled. | ||||
| Chh3cDot11SaTrapAQThreshold | 1.3.6.1.4.1.25506.2.75.13.1.1.1.7 | Integer32 (1..100) | RW | |
column · Integer32 (1..100) · read-write · current Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent. | ||||
| Chh3cDot11SaDrivenRRMEnable | 1.3.6.1.4.1.25506.2.75.13.1.1.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current Configure whether to trigger RRM to run when an access point detects a certain level of interference. | ||||
| Chh3cDot11SaDrivenRRMSnt | 1.3.6.1.4.1.25506.2.75.13.1.1.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity.
| ||||
| Nhh3cDot11SaStatusGroup | 1.3.6.1.4.1.25506.2.75.13.2 | |||
| Thh3cDot11SaRtFFTDataTable | 1.3.6.1.4.1.25506.2.75.13.2.1 | NA | ||
table · not-accessible · current This table contains the real-time FFT data for spectrum analysis. | ||||
| Rhh3cDot11SaRtFFTDataEntry | 1.3.6.1.4.1.25506.2.75.13.2.1.1 | NA | ||
row · not-accessible · current This entry contains the real-time FFT data for spectrum analysis. | ||||
| Chh3cDot11SaAPID | 1.3.6.1.4.1.25506.2.75.13.2.1.1.1 | Hh3cDot11ObjectIDType | NA | |
column · Hh3cDot11ObjectIDType · not-accessible · current Represents the serial ID of the AP. | ||||
| Chh3cDot11SaRadioID | 1.3.6.1.4.1.25506.2.75.13.2.1.1.2 | Hh3cDot11RadioScopeType | NA | |
column · Hh3cDot11RadioScopeType · not-accessible · current Represents the ID of the radio. | ||||
| Chh3cDot11SaRtDataGroupID | 1.3.6.1.4.1.25506.2.75.13.2.1.1.3 | Integer32 | NA | |
column · Integer32 · not-accessible · current Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval. | ||||
| Chh3cDot11SaFrequency | 1.3.6.1.4.1.25506.2.75.13.2.1.1.4 | Integer32 | NA | |
column · Integer32 · not-accessible · current Represents the frequency number in 100 Hz. | ||||
| Chh3cDot11SaRtFreqPower | 1.3.6.1.4.1.25506.2.75.13.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the power of the frequency point. | ||||
| Chh3cDot11SaRtFreqMaxPower | 1.3.6.1.4.1.25506.2.75.13.2.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the max power of the frequency point. | ||||
| Chh3cDot11SaRtFreqDutyCycle | 1.3.6.1.4.1.25506.2.75.13.2.1.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the duty cycle of the frequency point. | ||||
| Chh3cDot11SaRtFreqDataSeqNo | 1.3.6.1.4.1.25506.2.75.13.2.1.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Represents the sequence number of the data. | ||||
| Thh3cDot11SaIntfDevTable | 1.3.6.1.4.1.25506.2.75.13.2.2 | NA | ||
table · not-accessible · current This table contains the information of the interfering devices. | ||||
| Rhh3cDot11SaIntfDevEntry | 1.3.6.1.4.1.25506.2.75.13.2.2.1 | NA | ||
row · not-accessible · current This entry contains the information of the interfering devices. | ||||
| Chh3cDot11SaDevID | 1.3.6.1.4.1.25506.2.75.13.2.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Represents the device identification number that uniquely identified the interfering device. | ||||
| Chh3cDot11SaDevType | 1.3.6.1.4.1.25506.2.75.13.2.2.1.2 | Hh3cDot11SaIntfDevType | RO | |
column · Hh3cDot11SaIntfDevType · read-only · current Represents type of the interferer. | ||||
| Chh3cDot11SaDevSI | 1.3.6.1.4.1.25506.2.75.13.2.2.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe). | ||||
| Chh3cDot11SaDevRSSI | 1.3.6.1.4.1.25506.2.75.13.2.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Represents receive signal strength indicator (RSSI) of interfering device. | ||||
| Chh3cDot11SaDevDutyCycle | 1.3.6.1.4.1.25506.2.75.13.2.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Represents proportion of time in percentage during which the interfering device was active. | ||||
| Chh3cDot11SaDevAffectedChls | 1.3.6.1.4.1.25506.2.75.13.2.2.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents channels that the interfering device affects. | ||||
| Chh3cDot11SaDevDetectedTime | 1.3.6.1.4.1.25506.2.75.13.2.2.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current Represents time at which the interference was detected. | ||||
| Thh3cDot11SaAirQualityTable | 1.3.6.1.4.1.25506.2.75.13.2.3 | NA | ||
table · not-accessible · current This table contains the air quality of the channels. | ||||
| Rhh3cDot11SaAirQualityEntry | 1.3.6.1.4.1.25506.2.75.13.2.3.1 | NA | ||
row · not-accessible · current This entry contains the air quality of the channels. | ||||
| Chh3cDot11SaChlNum | 1.3.6.1.4.1.25506.2.75.13.2.3.1.1 | Hh3cDot11ChannelScopeType | NA | |
column · Hh3cDot11ChannelScopeType · not-accessible · current Represents the radio channel where the air quality is monitored. | ||||
| Chh3cDot11SaAvgQuality | 1.3.6.1.4.1.25506.2.75.13.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the average air quality for this radio channel. | ||||
| Chh3cDot11SaMinQuality | 1.3.6.1.4.1.25506.2.75.13.2.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the minimum air quality for this radio channel. | ||||
| Chh3cDot11SaIntfDevNum | 1.3.6.1.4.1.25506.2.75.13.2.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band. | ||||
| Chh3cDot11SaWiFiUtil | 1.3.6.1.4.1.25506.2.75.13.2.3.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the percentage of the channel currently being used by Wi-Fi devices. | ||||
| Chh3cDot11SaNonWiFiUtil | 1.3.6.1.4.1.25506.2.75.13.2.3.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the percentage of the channel currently being used by non-Wi-Fi interference. | ||||
| Chh3cDot11SaNoiseFloor | 1.3.6.1.4.1.25506.2.75.13.2.3.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current Represents current noise floor recorded on the channel. | ||||
| Nhh3cDot11SaNotifyGroup | 1.3.6.1.4.1.25506.2.75.13.3 | |||
| Nhh3cDot11SaTraps | 1.3.6.1.4.1.25506.2.75.13.3.0 | |||
| !hh3cDot11SaIntfDevDetected | 1.3.6.1.4.1.25506.2.75.13.3.0.1 | |||
notification · current Interfering device is detected. | ||||
| !hh3cDot11SaIntfDevDisappear | 1.3.6.1.4.1.25506.2.75.13.3.0.2 | |||
notification · current Interfering device disappeared. | ||||
| !hh3cDot11SaChlQltLow | 1.3.6.1.4.1.25506.2.75.13.3.0.3 | |||
notification · current The quality of the channel is below the specified threshold. | ||||
| !hh3cDot11SaChlQltRecover | 1.3.6.1.4.1.25506.2.75.13.3.0.4 | |||
notification · current The quality of the channel recovered from low status. | ||||
| Nhh3cDot11SaTrapVars | 1.3.6.1.4.1.25506.2.75.13.3.1 | |||
| Shh3cDot11SaTrapAPID | 1.3.6.1.4.1.25506.2.75.13.3.1.1 | Hh3cDot11ObjectIDType | AN | |
scalar · Hh3cDot11ObjectIDType · accessible-for-notify · current Represents the identifier of the AP. | ||||
| Shh3cDot11SaTrapRadioID | 1.3.6.1.4.1.25506.2.75.13.3.1.2 | Hh3cDot11RadioScopeType | AN | |
scalar · Hh3cDot11RadioScopeType · accessible-for-notify · current Represents the identifier of the radio. | ||||
| Shh3cDot11SaTrapDevID | 1.3.6.1.4.1.25506.2.75.13.3.1.3 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents the device identification number that uniquely identified the interfering device. | ||||
| Shh3cDot11SaTrapIntfDevType | 1.3.6.1.4.1.25506.2.75.13.3.1.4 | Hh3cDot11SaIntfDevType | AN | |
scalar · Hh3cDot11SaIntfDevType · accessible-for-notify · current Represents type of the interferer. | ||||
| Shh3cDot11APTrapDevSI | 1.3.6.1.4.1.25506.2.75.13.3.1.5 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe). | ||||
| Shh3cDot11SaTrapDevRSSI | 1.3.6.1.4.1.25506.2.75.13.3.1.6 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents receive signal strength indicator (RSSI) of interfering device. | ||||
| Shh3cDot11APTrapDevDC | 1.3.6.1.4.1.25506.2.75.13.3.1.7 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents proportion of time in percentage during which the interfering device was active. | ||||
| Shh3cDot11APTrapDevChls | 1.3.6.1.4.1.25506.2.75.13.3.1.8 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Represents channels that the interfering device affects. | ||||
| Shh3cDot11APTrapDevDctTime | 1.3.6.1.4.1.25506.2.75.13.3.1.9 | DateAndTime | AN | |
scalar · DateAndTime · accessible-for-notify · current Represents time at which the interference was detected. | ||||
| Shh3cDot11SaTrapChlNum | 1.3.6.1.4.1.25506.2.75.13.3.1.10 | Hh3cDot11ChannelScopeType | AN | |
scalar · Hh3cDot11ChannelScopeType · accessible-for-notify · current Represents the radio channel where the air quality is monitored. | ||||
| Shh3cDot11SaTrapChlQlt | 1.3.6.1.4.1.25506.2.75.13.3.1.11 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents the quality for this radio channel. | ||||
| Shh3cDot11SaTrapChlIntfNum | 1.3.6.1.4.1.25506.2.75.13.3.1.12 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band. | ||||
Traps / Notifications
- hh3cDot11SaChlQltLow
1.3.6.1.4.1.25506.2.75.13.3.0.3 - hh3cDot11SaChlQltRecover
1.3.6.1.4.1.25506.2.75.13.3.0.4 - hh3cDot11SaIntfDevDetected
1.3.6.1.4.1.25506.2.75.13.3.0.1 - hh3cDot11SaIntfDevDisappear
1.3.6.1.4.1.25506.2.75.13.3.0.2