HH3C-DOT11-ROAM-MIB
H3CThis MIB provides information about WLAN roaming configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. HA The AC to which a wireless station is connected by associating with an AP for the first time is the HA of the station. FA An AC that is other than the HA and to which a station is currently connected is an FA of the station. Fast-roam capable station A wireless station which directly associates to a fast-roam service (rsn+dot1X) with one AC for the first time. Roam-out station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-out station at its HA. Roam-in station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-in station at the FA. Intra-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to the same AC. Inter-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to different ACs. Inter-AC fast roaming capability If a station uses 802.1x (RSN) authentication through negotiation, this station has inter-AC fast roaming capability. WLAN-tunnel One type of layer 2 interface which is bound with an IACTP data tunnel and used to tunnel unicast/broadcast frames between ACs.
snmptranslate -m HH3C-DOT11-ROAM-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-DOT11-ROAM-MIB <host> 1.3.6.1.4.1.25506.2.75.10Imports
| HH3C-DOT11-REF-MIB | hh3cDot11 |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cDot11ROAM | 1.3.6.1.4.1.25506.2.75.10 | |||
identity This MIB provides information about WLAN roaming configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. HA The AC to which a wireless station is connected by associating with an AP for the first time is the HA of the station. FA An AC that is other than the HA and to which a station is currently connected is an FA of the station. Fast-roam capable station A wireless station which directly associates to a fast-roam service (rsn+dot1X) with one AC for the first time. Roam-out station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-out station at its HA. Roam-in station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-in station at the FA. Intra-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to the same AC. Inter-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to different ACs. Inter-AC fast roaming capability If a station uses 802.1x (RSN) authentication through negotiation, this station has inter-AC fast roaming capability. WLAN-tunnel One type of layer 2 interface which is bound with an IACTP data tunnel and used to tunnel unicast/broadcast frames between ACs. | ||||
| Nhh3cDot11RoamCfgGroup | 1.3.6.1.4.1.25506.2.75.10.1 | |||
| Thh3cDot11MobGrpTable | 1.3.6.1.4.1.25506.2.75.10.1.1 | NA | ||
table · not-accessible · current The table defines the parameters for roaming group configuration. | ||||
| Rhh3cDot11MobGrpEntry | 1.3.6.1.4.1.25506.2.75.10.1.1.1 | NA | ||
row · not-accessible · current This entry contains information of mobile group.
| ||||
| Chh3cDot11MobGrpName | 1.3.6.1.4.1.25506.2.75.10.1.1.1.1 | OCTET STRING (SIZE (1..15)) | NA | |
column · OCTET STRING (SIZE (1..15)) · not-accessible · current Represents the name of roam group. | ||||
| Chh3cdot11MobGrpTunnelType | 1.3.6.1.4.1.25506.2.75.10.1.1.1.2 | Hh3cDot11RoamMobileTunnelType | RC | |
column · Hh3cDot11RoamMobileTunnelType · read-create · current Represents the protocol type of mobility-tunnel. | ||||
| Chh3cDot11MobGrpSrcIPAddr | 1.3.6.1.4.1.25506.2.75.10.1.1.1.3 | InetAddress | RC | |
column · InetAddress · read-create · current Represents the IP address of tunnel source. The IP address type must be the same as hh3cdot11MobGrpTunnelType. The default value is zero. | ||||
| Chh3cDot11MobGrpAuthMode | 1.3.6.1.4.1.25506.2.75.10.1.1.1.4 | Hh3cDot11RoamAuthMode | RC | |
column · Hh3cDot11RoamAuthMode · read-create · current Represents the authentication mode of IACTP tunnel. This object can be used to enable IACTP control message integrity authentication. | ||||
| Chh3cDot11MobGrpAuthKey | 1.3.6.1.4.1.25506.2.75.10.1.1.1.5 | OCTET STRING (SIZE (0..16)) | RC | |
column · OCTET STRING (SIZE (0..16)) · read-create · current Represents the authentication key of IACTP tunnel. Authentication key to be used with the given authentication method. This object can not be modified when the value of hh3cDot11MobGrpAuthMode is 'none'. | ||||
| Chh3cDot11MobGrpEnable | 1.3.6.1.4.1.25506.2.75.10.1.1.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current State of a mobile group.
'true' : The WLAN mobility group will be enabled.
'false' : The inter-AC tunnel communication for the
mobility group will be disabled.
A mobility group can be enabled only when the source
IP address is configured. The other objects in this entry
can become effective only when mobility group is enabled.
The other objects in this entry can not be modified
after enabling mobility group. | ||||
| Chh3cDot11MobGrpRowStatus | 1.3.6.1.4.1.25506.2.75.10.1.1.1.7 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. | ||||
| Thh3cDot11MobGrpMemberTable | 1.3.6.1.4.1.25506.2.75.10.1.2 | NA | ||
table · not-accessible · current The table defines the parameters for roaming member configuration. | ||||
| Rhh3cDot11MobGrpMemberEntry | 1.3.6.1.4.1.25506.2.75.10.1.2.1 | NA | ||
row · not-accessible · current This entry contains information of mobile group member. | ||||
| Chh3cDot11MobGrpMemberIpAddr | 1.3.6.1.4.1.25506.2.75.10.1.2.1.1 | InetAddress | NA | |
column · InetAddress · not-accessible · current Represents the IP address of group member. It can not be the same as the source IP address of the mobile group. The address type must be the same as the hh3cdot11MobGrpTunnelType. | ||||
| Chh3cDot11MobGrpMemberStatus | 1.3.6.1.4.1.25506.2.75.10.1.2.1.2 | Hh3cDot11RoamIACTPStatus | RO | |
column · Hh3cDot11RoamIACTPStatus · read-only · current Represents the status of group member. | ||||
| Chh3cDot11MobGrpMemberIf | 1.3.6.1.4.1.25506.2.75.10.1.2.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents the tunnel interface name of group member. | ||||
| Chh3cDot11MobGrpMemberUpTime | 1.3.6.1.4.1.25506.2.75.10.1.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the sustaining time from tunnel up. If tunnel is down, MemberUpTime is zero.
| ||||
| Chh3cDot11MobGrpMemberRowStatus | 1.3.6.1.4.1.25506.2.75.10.1.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. | ||||
| Nhh3cDot11RoamStatusGroup | 1.3.6.1.4.1.25506.2.75.10.2 | |||
| Thh3cDot11RoamInInfoTable | 1.3.6.1.4.1.25506.2.75.10.2.1 | NA | ||
table · not-accessible · current The table can used to display the information of roaming in client. | ||||
| Rhh3cDot11RoamInInfoEntry | 1.3.6.1.4.1.25506.2.75.10.2.1.1 | NA | ||
row · not-accessible · current This entry contains information of roaming in client. | ||||
| Chh3cDot11RoamClientMAC | 1.3.6.1.4.1.25506.2.75.10.2.1.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current Represents the MAC address of roaming in client. | ||||
| Chh3cDot11RoamInClientBSSID | 1.3.6.1.4.1.25506.2.75.10.2.1.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current Represents BSSID of the AP to which the Roam-In client is associated. | ||||
| Chh3cDot11RoamInClientVlanID | 1.3.6.1.4.1.25506.2.75.10.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the VLAN ID of Roam-In client. | ||||
| Chh3cDot11RoamInHomeACIPType | 1.3.6.1.4.1.25506.2.75.10.2.1.1.4 | InetAddressType | RO | |
column · InetAddressType · read-only · current Represents the protocol type of home AC address. | ||||
| Chh3cDot11RoamInHomeACIPAddr | 1.3.6.1.4.1.25506.2.75.10.2.1.1.5 | InetAddress | RO | |
column · InetAddress · read-only · current Represents the address of home AC. | ||||
| Thh3cDot11RoamOutInfoTable | 1.3.6.1.4.1.25506.2.75.10.2.2 | NA | ||
table · not-accessible · current The table can used to display the information of roaming out client. | ||||
| Rhh3cDot11RoamOutInfoEntry | 1.3.6.1.4.1.25506.2.75.10.2.2.1 | NA | ||
row · not-accessible · current This entry contains information of roaming out client. | ||||
| Chh3cDot11RoamOutClientBSSID | 1.3.6.1.4.1.25506.2.75.10.2.2.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current Represents the BSSID of the AP to which the Roam-Out client is associated. | ||||
| Chh3cDot11RoamOutClientVlanID | 1.3.6.1.4.1.25506.2.75.10.2.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Represents the VLAN ID of Roam-Out client. | ||||
| Chh3cDot11RoamOutForeignACIPType | 1.3.6.1.4.1.25506.2.75.10.2.2.1.3 | InetAddressType | RO | |
column · InetAddressType · read-only · current Represents the protocol type of foreign AC address. | ||||
| Chh3cDot11RoamOutForeignACIPAddr | 1.3.6.1.4.1.25506.2.75.10.2.2.1.4 | InetAddress | RO | |
column · InetAddress · read-only · current Represents the address of foreign AC. | ||||
| Chh3cDot11RoamOutClientUpTime | 1.3.6.1.4.1.25506.2.75.10.2.2.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Represents how long the Roam-Out client is associated with the foreign AC.
| ||||
| Thh3cDot11RoamTrackTable | 1.3.6.1.4.1.25506.2.75.10.2.3 | NA | ||
table · not-accessible · current The table contains the roam-track information of a specified client on the client's HA. | ||||
| Rhh3cDot11RoamTrackEntry | 1.3.6.1.4.1.25506.2.75.10.2.3.1 | NA | ||
row · not-accessible · current This entry contains information of a specified client on the client's HA. | ||||
| Chh3cDot11RoamTrackIndex | 1.3.6.1.4.1.25506.2.75.10.2.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Represents the index of this entry. | ||||
| Chh3cDot11RoamTrackClientMAC | 1.3.6.1.4.1.25506.2.75.10.2.3.1.2 | MacAddress | RO | |
column · MacAddress · read-only · current Represents the MAC address of the roamed client. | ||||
| Chh3cDot11RoamTrackBSSID | 1.3.6.1.4.1.25506.2.75.10.2.3.1.3 | MacAddress | RO | |
column · MacAddress · read-only · current Represents the BSSID of the AP with which the client is associated. | ||||
| Chh3cDot11RoamTrackUpTime | 1.3.6.1.4.1.25506.2.75.10.2.3.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Represents how long the client is associated with the BSSID.
| ||||
| Chh3cDot11RoamTrackACIPType | 1.3.6.1.4.1.25506.2.75.10.2.3.1.5 | InetAddressType | RO | |
column · InetAddressType · read-only · current Represents the protocol type of the IP address of the access controller with which the client is connected. | ||||
| Chh3cDot11RoamTrackACIPAddr | 1.3.6.1.4.1.25506.2.75.10.2.3.1.6 | InetAddress | RO | |
column · InetAddress · read-only · current Represents the IP address of the access controller with which the client is connected. | ||||
| Nhh3cDot11RoamStatisGroup | 1.3.6.1.4.1.25506.2.75.10.3 | |||
| Shh3cDot11IntraACRoamingSuccCnt | 1.3.6.1.4.1.25506.2.75.10.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the count of client successfully roam Intra-AC. | ||||
| Shh3cDot11InterACRoamingSuccCnt | 1.3.6.1.4.1.25506.2.75.10.3.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the count of client successfully roam in Inter-AC. | ||||
| Shh3cDot11InterACRoamOutSuccCnt | 1.3.6.1.4.1.25506.2.75.10.3.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the count of client successfully roam out Inter-AC. | ||||
| Shh3cDot11InterACRoamInSuccCnt | 1.3.6.1.4.1.25506.2.75.10.3.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the number of clients successfully roamed in inter-AC roaming. | ||||
| Nhh3cDot11RoamStatis2Group | 1.3.6.1.4.1.25506.2.75.10.4 | |||
| Shh3cDot11IntraACRoamingSuccCnt2 | 1.3.6.1.4.1.25506.2.75.10.4.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the count of client successfully roam Intra-AC in Counter32. | ||||
| Shh3cDot11InterACRoamingSuccCnt2 | 1.3.6.1.4.1.25506.2.75.10.4.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the count of client successfully roam in Inter-AC in Counter32. | ||||
| Shh3cDot11InterACRoamOutSuccCnt2 | 1.3.6.1.4.1.25506.2.75.10.4.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the count of client successfully roam out Inter-AC in Counter32. | ||||
| Shh3cDot11InterACRoamInSuccCnt2 | 1.3.6.1.4.1.25506.2.75.10.4.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the number of clients successfully roamed in inter-AC roaming in Counter32. | ||||
Textual conventions
Hh3cDot11RoamAuthModeINTEGERmd5(2)none(1)The authentication mode of the mobility-tunnel. This object has two defined values: - 'none', which indicates that the authentication mode of the mobility-tunnel is None. - 'md5', which indicates that the authentication mode of the mobility-tunnel is MD5.
Hh3cDot11RoamIACTPStatusINTEGERidle(2)init(1)joinConfirmWait(5)joinError(6)joinRequestWait(3)joinResponseWait(4)run(7)The status of IACTP state machine.
Hh3cDot11RoamMobileTunnelTypeINTEGERipv4(1)ipv6(2)The protocol type of the mobility-tunnel. This object has two defined values: - 'ipv4', which indicates that the protocol type of the mobility-tunnel is IPv4. - 'ipv6', which indicates that the protocol type of the mobility-tunnel is IPv6.