HH3C-DOT11-ACMT-MIB
H3CThis MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
snmptranslate -m HH3C-DOT11-ACMT-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-DOT11-ACMT-MIB <host> 1.3.6.1.4.1.25506.2.75.1Imports
| HH3C-DOT11-REF-MIB | Hh3cDot11MACModeType, Hh3cDot11ObjectIDType, Hh3cDot11TunnelSecSchemType, hh3cDot11 |
|---|---|
| IANAifType-MIB | IANAifType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cDot11ACMT | 1.3.6.1.4.1.25506.2.75.1 | |||
identity This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID. | ||||
| Nhh3cDot11ACObjectGroup | 1.3.6.1.4.1.25506.2.75.1.1 | |||
| Nhh3cDot11ACObject | 1.3.6.1.4.1.25506.2.75.1.1.1 | |||
| Shh3cDot11CurrentACMACMode | 1.3.6.1.4.1.25506.2.75.1.1.1.1 | Hh3cDot11MACModeType | RO | |
scalar · Hh3cDot11MACModeType · read-only · current Represents which MAC mode defined in the CAPWAP draft is in use for the AC. | ||||
| Shh3cDot11MaxAPNumPermitted | 1.3.6.1.4.1.25506.2.75.1.1.1.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the maximum number of AP connection permitted for one AC. | ||||
| Shh3cDot11MaxStationNumPermitted | 1.3.6.1.4.1.25506.2.75.1.1.1.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the maximum number of station connection permitted for one AC. | ||||
| Shh3cDot11RunAPNumThreshold | 1.3.6.1.4.1.25506.2.75.1.1.1.4 | Integer32 (30..100) | RW | |
scalar · Integer32 (30..100) · read-write · current When the percentage of run AP number is larger than this threshold, a notification will be sent.
| ||||
| Shh3cDot11MaxNewConnCntPerSecCM | 1.3.6.1.4.1.25506.2.75.1.1.1.5 | Integer32 | RW | |
scalar · Integer32 · read-write · current Represents the maximum count of station connected to AC per second. | ||||
| Shh3cDot11IFNumberCM | 1.3.6.1.4.1.25506.2.75.1.1.1.6 | Integer32 | RW | |
scalar · Integer32 · read-write · current All intface in AC except console. | ||||
| Shh3cDot11APLicenseWeight | 1.3.6.1.4.1.25506.2.75.1.1.1.7 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Represents the license weight of AP connection for one AC. | ||||
| Shh3cDot11ACTotalRebootCnt | 1.3.6.1.4.1.25506.2.75.1.1.1.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of AC restarts. | ||||
| Nhh3cDot11ACLoadInfo | 1.3.6.1.4.1.25506.2.75.1.1.2 | |||
| Shh3cDot11APConnectCount | 1.3.6.1.4.1.25506.2.75.1.1.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of APs which are connecting to AC. | ||||
| Shh3cDot11StationConnectCount | 1.3.6.1.4.1.25506.2.75.1.1.2.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of stations which are accessing the WLAN service through AC. | ||||
| Thh3cDot11ACIFLoadInfoTable | 1.3.6.1.4.1.25506.2.75.1.1.2.3 | NA | ||
table · not-accessible · current Represents AP number information of interface. | ||||
| Rhh3cDot11ACIFLoadInfoEntry | 1.3.6.1.4.1.25506.2.75.1.1.2.3.1 | NA | ||
row · not-accessible · current Each entry represents AP number information of an interface
| ||||
| Chh3cDot11ACIfIndex | 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.1 | Integer32 | AN | |
column · Integer32 · accessible-for-notify · current Represents index of AC interface. | ||||
| Chh3cDot11ACIfApNum | 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Represents AP number connected to the AC interface. | ||||
| Chh3cDot11ACIfStaNum | 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Represents Station number connected to the AC interface. | ||||
| Chh3cDot11ACIfName | 1.3.6.1.4.1.25506.2.75.1.1.2.3.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents InterfaceName AP number connected to AC interface. | ||||
| Shh3cDot11MasterAPCount | 1.3.6.1.4.1.25506.2.75.1.1.2.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of AP which have established the master tunnel with AC. | ||||
| Shh3cDot11SlaveAPCount | 1.3.6.1.4.1.25506.2.75.1.1.2.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of AP which have established the slave tunnel with AC. | ||||
| Shh3cDot11ConnectAutoAPCount | 1.3.6.1.4.1.25506.2.75.1.1.2.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of auto APs that are connecting to AC. | ||||
| Shh3cDot11PersistentAPCount | 1.3.6.1.4.1.25506.2.75.1.1.2.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of persistent AP. | ||||
| Shh3cDot11AcUploadFrameCnt | 1.3.6.1.4.1.25506.2.75.1.1.2.8 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the number of frames that AP sends to AC through LWAPP tunnel. | ||||
| Shh3cDot11AcDownloadFrameCnt | 1.3.6.1.4.1.25506.2.75.1.1.2.9 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the number of frames that AC sends to AP through LWAPP tunnel. | ||||
| Shh3cDot11AcUploadFrameBytes | 1.3.6.1.4.1.25506.2.75.1.1.2.10 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the bytes of frames that AP sends to AC through LWAPP tunnel. | ||||
| Shh3cDot11AcDownloadFrameBytes | 1.3.6.1.4.1.25506.2.75.1.1.2.11 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the bytes of frames that AC sends to AP through LWAPP tunnel. | ||||
| Shh3cDot11BackupACRole | 1.3.6.1.4.1.25506.2.75.1.1.2.12 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.
| ||||
| Shh3cDot11BackupACNMSIP | 1.3.6.1.4.1.25506.2.75.1.1.2.13 | IpAddress | RO | |
scalar · IpAddress · read-only · current This object represents the manger IP address of the slave ac. | ||||
| Shh3cDot11ACBackupMode | 1.3.6.1.4.1.25506.2.75.1.1.2.14 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object represents the ac backup mode.
| ||||
| Shh3cDot11ACBackupStatus | 1.3.6.1.4.1.25506.2.75.1.1.2.15 | INTEGER | RO | |
scalar · INTEGER · read-only · current This object represents the ac backup status.
| ||||
| Shh3cDot11ACSwitchCnt | 1.3.6.1.4.1.25506.2.75.1.1.2.16 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object represents the ac switch times. | ||||
| Shh3cDot11ACSouthifPacketOutputCount | 1.3.6.1.4.1.25506.2.75.1.1.2.17 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the count of output packets with the down-link interface. | ||||
| Shh3cDot11ACSouthifPacketOutputBytes | 1.3.6.1.4.1.25506.2.75.1.1.2.18 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the bytes of output packets with the down-link interface. | ||||
| Shh3cDot11ACSouthifPacketInputCount | 1.3.6.1.4.1.25506.2.75.1.1.2.19 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the count of input packets with the down-link interface. | ||||
| Shh3cDot11ACSouthifPacketInputBytes | 1.3.6.1.4.1.25506.2.75.1.1.2.20 | Counter64 | RO | |
scalar · Counter64 · read-only · current Represents the bytes of input packets with the down-link interface. | ||||
| Shh3cDot11TotalAPconnected | 1.3.6.1.4.1.25506.2.75.1.1.2.21 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of AP which are connected to AC. | ||||
| Shh3cDot11RemainingAPcapacity | 1.3.6.1.4.1.25506.2.75.1.1.2.22 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the remaining AP capacity of the AC. | ||||
| Shh3cDot11Secretkey | 1.3.6.1.4.1.25506.2.75.1.1.2.33 | OCTET STRING (SIZE (0..16)) | RW | |
scalar · OCTET STRING (SIZE (0..16)) · read-write · current Save the secret key for the SM4 algorithm. | ||||
| Nhh3cDot11WLANAssocStatisInfo | 1.3.6.1.4.1.25506.2.75.1.1.3 | |||
| Shh3cDot11StationAssocSum | 1.3.6.1.4.1.25506.2.75.1.1.3.1 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station association. | ||||
| Shh3cDot11StationAssocFailSum | 1.3.6.1.4.1.25506.2.75.1.1.3.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station association failure. | ||||
| Shh3cDot11StationReassocSum | 1.3.6.1.4.1.25506.2.75.1.1.3.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station reassociation. | ||||
| Shh3cDot11StationAssocRejectedSum | 1.3.6.1.4.1.25506.2.75.1.1.3.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station association rejected on account of resource limit. | ||||
| Shh3cDot11StationExDeAuthenSum | 1.3.6.1.4.1.25506.2.75.1.1.3.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP). | ||||
| Shh3cDot11StationCurAssocSum | 1.3.6.1.4.1.25506.2.75.1.1.3.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the total number of current associated stations. | ||||
| Shh3cDot11StationAssocReqSum | 1.3.6.1.4.1.25506.2.75.1.1.3.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station association request. | ||||
| Shh3cDot11StationReassocReqSum | 1.3.6.1.4.1.25506.2.75.1.1.3.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station reassociation request. | ||||
| Shh3cDot11StationReassocFailSum | 1.3.6.1.4.1.25506.2.75.1.1.3.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of station reassociation failure. | ||||
| Nhh3cDot11ACBASInfo | 1.3.6.1.4.1.25506.2.75.1.1.4 | |||
| Nhh3cDot11ACBASSysObjects | 1.3.6.1.4.1.25506.2.75.1.1.4.1 | |||
| Nhh3cDot11ACBASTableObjects | 1.3.6.1.4.1.25506.2.75.1.1.4.2 | |||
| Thh3cDot11ACBASIfTable | 1.3.6.1.4.1.25506.2.75.1.1.4.2.3 | NA | ||
table · not-accessible · current Represents the BAS information of interfaces. | ||||
| Rhh3cDot11ACBASIfEntry | 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1 | NA | ||
row · not-accessible · current Each entry represents the BAS information of an interface | ||||
| Chh3cDot11ACBASIfIndex | 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current The ifIndex of the BAS interface. | ||||
| Chh3cDot11ACBASIfDescr | 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.2 | OCTET STRING (SIZE (0..255)) | RO | |
column · OCTET STRING (SIZE (0..255)) · read-only · current A textual string containing information about the BAS interface. | ||||
| Chh3cDot11ACBASIfType | 1.3.6.1.4.1.25506.2.75.1.1.4.2.3.1.3 | IANAifType | RO | |
column · IANAifType · read-only · current The type of the BAS interface. | ||||
| Nhh3cDot11ACStaUserSecAuthStatis | 1.3.6.1.4.1.25506.2.75.1.1.5 | |||
| Shh3cDot11ACStaUserAuthCurNumber | 1.3.6.1.4.1.25506.2.75.1.1.5.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the current number of user authenticated with this AC. | ||||
| Shh3cDot11ACStaUserConnFailCnt | 1.3.6.1.4.1.25506.2.75.1.1.5.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of user disconnected with this AC. | ||||
| Shh3cDot11ACStaUserAuthReqCnt | 1.3.6.1.4.1.25506.2.75.1.1.5.3 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of user authenticate request with this AC. | ||||
| Shh3cDot11ACStaUserAuthSuccCnt | 1.3.6.1.4.1.25506.2.75.1.1.5.4 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of users authenticated successful with this AC. | ||||
| Shh3cDot11ACStaUserAuthFailCnt | 1.3.6.1.4.1.25506.2.75.1.1.5.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of user authenticated failed with this AC. | ||||
| Shh3cDot11ACStaUserAllAuthCntCM | 1.3.6.1.4.1.25506.2.75.1.1.5.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of users authenticated with this AC. | ||||
| Shh3cDot11ACStaUserAuthRespCntCM | 1.3.6.1.4.1.25506.2.75.1.1.5.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the total number of user authenticate response with this AC. | ||||
| Nhh3cDot11ACStaSecAuthTypeStatis | 1.3.6.1.4.1.25506.2.75.1.1.6 | |||
| Shh3cDot11ACStaUserPortalOnlineNum | 1.3.6.1.4.1.25506.2.75.1.1.6.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users. | ||||
| Shh3cDot11ACStaUserFreeAuthOnlineNum | 1.3.6.1.4.1.25506.2.75.1.1.6.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current Numbers of online user is no need authenticated. | ||||
| Shh3cDot11ACStaUserAssociateAuthOnlineNum | 1.3.6.1.4.1.25506.2.75.1.1.6.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the number of online users authenticated by associated authentication, excluding AutoAuth users. | ||||
| Shh3cDot11ACStaUserMacAuthOnlineNum | 1.3.6.1.4.1.25506.2.75.1.1.6.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current The numbers of online user which is launched authentication by MAC address and authenticated by Radius. | ||||
| Shh3cDot11ACStaUserPortalLostConnectionCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current For PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | ||||
| Shh3cDot11ACStaUserFreeAuthLostConnectionCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.6 | Counter32 | RO | |
scalar · Counter32 · read-only · current For FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | ||||
| Shh3cDot11ACStaUserAssociateAuthLostConnectionCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.7 | Counter32 | RO | |
scalar · Counter32 · read-only · current For AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | ||||
| Shh3cDot11ACStaUserMacAuthLostConnectionCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.8 | Counter32 | RO | |
scalar · Counter32 · read-only · current For MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed. | ||||
| Shh3cDot11ACStaPortalAuthReqCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.9 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents PortalAuth request count after AP up. | ||||
| Shh3cDot11ACStaAssociateAuthReqCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.10 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents AssociateAuth request count after AP up. | ||||
| Shh3cDot11ACStaMacAuthReqCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.11 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents MacAuth request count after AP up. | ||||
| Shh3cDot11ACStaPortalAuthSuccCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.12 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents count of PortalAuth authenticated successfully after AP up. | ||||
| Shh3cDot11ACStaAssociateAuthSuccCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.13 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents count of AssociateAuth authenticated successfully after AP up. | ||||
| Shh3cDot11ACStaMacAuthSuccCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.14 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents count of MacAuth authenticated successfully after AP up. | ||||
| Shh3cDot11ACStaPortalAuthReqFailCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.15 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents count of PortalAuth failure in request after AP up. | ||||
| Shh3cDot11ACStaAssociateAuthReqFailCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.16 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents count of AssociateAuth failure in request after AP up. | ||||
| Shh3cDot11ACStaMacAuthReqFailCnt | 1.3.6.1.4.1.25506.2.75.1.1.6.17 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents count of MacAuth failure in request after AP up. | ||||
| Shh3cDot11ACStaUserAutoAuthOnlineNumCM | 1.3.6.1.4.1.25506.2.75.1.1.6.18 | Integer32 | RO | |
scalar · Integer32 · read-only · current Represents the number of online users authenticated by auto authentication. | ||||
| Shh3cDot11ACStaUserAutoAuthLostConnectionCntCM | 1.3.6.1.4.1.25506.2.75.1.1.6.19 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves. | ||||
| Shh3cDot11ACStaAutoAuthReqCntCM | 1.3.6.1.4.1.25506.2.75.1.1.6.20 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the count of AutoAuth requests after AP up. | ||||
| Shh3cDot11ACStaAutoAuthSuccCntCM | 1.3.6.1.4.1.25506.2.75.1.1.6.21 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the count of successful AutoAuth authentications after AP up. | ||||
| Shh3cDot11ACStaAutoAuthReqFailCntCM | 1.3.6.1.4.1.25506.2.75.1.1.6.22 | Counter32 | RO | |
scalar · Counter32 · read-only · current Represents the count of failed AutoAuth requests after AP is up. | ||||
| Thh3cDot11ACPortalStatisticCMTable | 1.3.6.1.4.1.25506.2.75.1.1.7 | NA | ||
table · not-accessible · current The table describes portal statistics information. | ||||
| Rhh3cDot11ACPortalStatisticCMEntry | 1.3.6.1.4.1.25506.2.75.1.1.7.1 | NA | ||
row · not-accessible · current Each entry contains the portal statistics information of an SSID. | ||||
| Chh3cDot11ACPortalStatisticSSIDCM | 1.3.6.1.4.1.25506.2.75.1.1.7.1.1 | OCTET STRING (SIZE (1..32)) | NA | |
column · OCTET STRING (SIZE (1..32)) · not-accessible · current Represents the service policy name. | ||||
| Chh3cDot11ACPortalStatAuthReqCM | 1.3.6.1.4.1.25506.2.75.1.1.7.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current Represents the total number of portal authentication requests from portal server to AC. | ||||
| Chh3cDot11ACPortalStatAuthRespCM | 1.3.6.1.4.1.25506.2.75.1.1.7.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current Represents the total number of portal authentication responses from AC to portal server. | ||||
| Thh3cDot11LocalACModelTable | 1.3.6.1.4.1.25506.2.75.1.1.8 | NA | ||
table · not-accessible · current The table defines the capability information for a specific kind of local AC. | ||||
| Rhh3cDot11LocalACModelEntry | 1.3.6.1.4.1.25506.2.75.1.1.8.1 | NA | ||
row · not-accessible · current Each entry contains capability information for a specific kind of local AC. | ||||
| Chh3cDot11LocalACModelAlias | 1.3.6.1.4.1.25506.2.75.1.1.8.1.1 | OCTET STRING (SIZE (0..127)) | NA | |
column · OCTET STRING (SIZE (0..127)) · not-accessible · current Represents alias of local AC model name. | ||||
| Chh3cDot11LocalACModelName | 1.3.6.1.4.1.25506.2.75.1.1.8.1.2 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents local AC model name. | ||||
| Chh3cDot11LocalACManufacturer | 1.3.6.1.4.1.25506.2.75.1.1.8.1.3 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current 'SMI Network Management Private Enterprise Codes' assigned by the IANA, which means the vendor of local AC. | ||||
| Chh3cDot11LocalACCPUType | 1.3.6.1.4.1.25506.2.75.1.1.8.1.4 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents the CPU type of local AC. | ||||
| Chh3cDot11LocalACCPUClockSpeed | 1.3.6.1.4.1.25506.2.75.1.1.8.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Represents the clock speed of CPU.
| ||||
| Chh3cDot11LocalACMemoryType | 1.3.6.1.4.1.25506.2.75.1.1.8.1.6 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents the memory card type of local AC. | ||||
| Chh3cDot11LocalACMemorySize | 1.3.6.1.4.1.25506.2.75.1.1.8.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Represents the size of local AC memory card.
| ||||
| Chh3cDot11LocalACFlashType | 1.3.6.1.4.1.25506.2.75.1.1.8.1.8 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Represents the flash card type of local AC. | ||||
| Chh3cDot11LocalACFlashSize | 1.3.6.1.4.1.25506.2.75.1.1.8.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Represents the size of local AC flash card.
| ||||
| Chh3cDot11LocalACMemSize | 1.3.6.1.4.1.25506.2.75.1.1.8.1.10 | Counter64 | RO | |
column · Counter64 · read-only · current Represents the size of local AC memory card.
| ||||
| Chh3cDot11LocalACFlashSizeInBytes | 1.3.6.1.4.1.25506.2.75.1.1.8.1.11 | Counter64 | RO | |
column · Counter64 · read-only · current This object represents the size of local AC flash card in bytes.
| ||||
| Nhh3cDot11CAPWAPTunnelGroup | 1.3.6.1.4.1.25506.2.75.1.2 | |||
| Thh3cDot11CAPWAPTunnelTable | 1.3.6.1.4.1.25506.2.75.1.2.1 | NA | ||
table · not-accessible · current The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol. | ||||
| Rhh3cDot11CAPWAPTunnelEntry | 1.3.6.1.4.1.25506.2.75.1.2.1.1 | NA | ||
row · not-accessible · current Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC. | ||||
| Chh3cDot11CurrTunnelAPID | 1.3.6.1.4.1.25506.2.75.1.2.1.1.1 | Hh3cDot11ObjectIDType | AN | |
column · Hh3cDot11ObjectIDType · accessible-for-notify · current To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC. | ||||
| Chh3cDot11CtrlTunnelCurrSec | 1.3.6.1.4.1.25506.2.75.1.2.1.1.2 | Hh3cDot11TunnelSecSchemType | RO | |
column · Hh3cDot11TunnelSecSchemType · read-only · current Represents what security scheme is in use for control tunnel. | ||||
| Chh3cDot11CtrlTunnelUpTime | 1.3.6.1.4.1.25506.2.75.1.2.1.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Represents how long for control tunnel up. If the value is zero, then tunnel is not set up.
| ||||
| Chh3cDot11DataTunnelCurrSec | 1.3.6.1.4.1.25506.2.75.1.2.1.1.4 | Hh3cDot11TunnelSecSchemType | RO | |
column · Hh3cDot11TunnelSecSchemType · read-only · current Represents what security scheme is in use for data tunnel. | ||||
| Chh3cDot11DataTunnelUpTime | 1.3.6.1.4.1.25506.2.75.1.2.1.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Represents how long for data tunnel up. If the value is zero, then tunnel is not set up.
| ||||
| Chh3cDot11CtrlTunnelUpTimeTicks | 1.3.6.1.4.1.25506.2.75.1.2.1.1.6 | TimeTicks | RO | |
column · TimeTicks · read-only · current Represents how long control tunnel is up. If the value is zero, then tunnel is not set up. | ||||
| Nhh3cDot11ACMtNotifyGroup | 1.3.6.1.4.1.25506.2.75.1.3 | |||
| Nhh3cDot11ACMtTraps | 1.3.6.1.4.1.25506.2.75.1.3.0 | |||
| !hh3cDot11ACMtTunnelSetupTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.1 | |||
notification · current This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel. | ||||
| !hh3cDot11ACMtTunnelDownTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.2 | |||
notification · current This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel. | ||||
| !hh3cDot11ACMtBackupSwtTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.3 | |||
notification · current This trap is sent by AC when AC switches from master to slave or from slave to master. | ||||
| !hh3cDot11ACLoadBalanceTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.4 | |||
notification · current This trap is sent by AC when load-balance is enabled on AC. | ||||
| !hh3cDot11ACStaFullTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.5 | |||
notification · current This notification will be sent when STA is full on AC.
| ||||
| !hh3cDot11ACStatusSwitchTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.6 | |||
notification · current This notification will be sent when AC switches from standby to active or from standby to active. | ||||
| !hh3cDot11RunAPNumOverload | 1.3.6.1.4.1.25506.2.75.1.3.0.7 | |||
notification · current The notification will be sent by AC when run AP number exceeds the threshold. | ||||
| !hh3cDot11RunAPNumOverloadRecover | 1.3.6.1.4.1.25506.2.75.1.3.0.8 | |||
notification · current The notification will be sent by AC when run AP number recover normal from overload state. | ||||
| !hh3cDot11APInvalidCertificateTrap | 1.3.6.1.4.1.25506.2.75.1.3.0.9 | |||
notification · current The AC sends the notification once the certificate of an AP expires. | ||||
| Nhh3cDot11ACMtTrapVarObjects | 1.3.6.1.4.1.25506.2.75.1.3.1 | |||
| Shh3cDot11ACMtTrapTunlDwnInfo | 1.3.6.1.4.1.25506.2.75.1.3.1.1 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Represents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed.
| ||||
| Shh3cDot11ACMtTrapTunlUpInfo | 1.3.6.1.4.1.25506.2.75.1.3.1.2 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC.
| ||||
| Shh3cDot11ACMtTrapBackupSwitchInfo | 1.3.6.1.4.1.25506.2.75.1.3.1.3 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master.
| ||||
| Shh3cDot11ACMtTrapTnlAPName | 1.3.6.1.4.1.25506.2.75.1.3.1.4 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Represents name of the AP which sets up the tunnel with the AC. | ||||
| Shh3cDot11ACMtTrapTnlAPIPAddr | 1.3.6.1.4.1.25506.2.75.1.3.1.5 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current Represents IP address of the AP which sets up the tunnel with the AC. | ||||
| Shh3cDot11LoadBalanceType | 1.3.6.1.4.1.25506.2.75.1.3.1.6 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Represents which kind load balance is enabled by AC.
The following values are supported:
traffic mode load-balancing: traffic snapshot is considered.
session mode load-balancing: the number of users associated
with the AP/radio is considered.
| ||||
| Shh3cDot11LoadBalanceThreshold | 1.3.6.1.4.1.25506.2.75.1.3.1.7 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents the value of load balance threshold. | ||||
| Shh3cDot11ACMtTrapAPIPv6Addr | 1.3.6.1.4.1.25506.2.75.1.3.1.8 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Represents IPv6 address of the AP which sets up the tunnel with the AC. | ||||
| Shh3cDot11ACMtTrapTunlDwnCount | 1.3.6.1.4.1.25506.2.75.1.3.1.9 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents how many times that the tunnel between AC and AP has down. | ||||
| Shh3cDot11ACMaxStaNum | 1.3.6.1.4.1.25506.2.75.1.3.1.10 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Represents the max number of STA on AC. | ||||
| Shh3cDot11ACMtTrapTnlAPSysName | 1.3.6.1.4.1.25506.2.75.1.3.1.11 | OCTET STRING | AN | |
scalar · OCTET STRING · accessible-for-notify · current Represents system name of the AP which sets up the tunnel with the AC. | ||||
| Shh3cDot11ACMtFirstTrapTime | 1.3.6.1.4.1.25506.2.75.1.3.1.12 | TimeTicks | AN | |
scalar · TimeTicks · accessible-for-notify · current Represents the first trap time. | ||||
| Shh3cDot11ACStatusSwitchInfo | 1.3.6.1.4.1.25506.2.75.1.3.1.13 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active.
| ||||
| Shh3cDot11SourceACNmsIP | 1.3.6.1.4.1.25506.2.75.1.3.1.14 | IpAddress | AN | |
scalar · IpAddress · accessible-for-notify · current Represents the NMS IP address of master AC. | ||||
| Shh3cDot11ACMtTrapAPMacAddress | 1.3.6.1.4.1.25506.2.75.1.3.1.15 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current Represents the MAC address of an AP. | ||||
| Shh3cDot11ACMtTrapACMacAddress | 1.3.6.1.4.1.25506.2.75.1.3.1.16 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current Represents the MAC address of the AC. | ||||
Traps / Notifications
- hh3cDot11ACLoadBalanceTrap
1.3.6.1.4.1.25506.2.75.1.3.0.4 - hh3cDot11ACMtBackupSwtTrap
1.3.6.1.4.1.25506.2.75.1.3.0.3 - hh3cDot11ACMtTunnelDownTrap
1.3.6.1.4.1.25506.2.75.1.3.0.2 - hh3cDot11ACMtTunnelSetupTrap
1.3.6.1.4.1.25506.2.75.1.3.0.1 - hh3cDot11ACStaFullTrap
1.3.6.1.4.1.25506.2.75.1.3.0.5 - hh3cDot11ACStatusSwitchTrap
1.3.6.1.4.1.25506.2.75.1.3.0.6 - hh3cDot11APInvalidCertificateTrap
1.3.6.1.4.1.25506.2.75.1.3.0.9 - hh3cDot11RunAPNumOverload
1.3.6.1.4.1.25506.2.75.1.3.0.7 - hh3cDot11RunAPNumOverloadRecover
1.3.6.1.4.1.25506.2.75.1.3.0.8