HH3C-DLDP-MIB
H3CDLDP (Device Link Detection Protocol) MIB
snmptranslate -m HH3C-DLDP-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-DLDP-MIB <host> 1.3.6.1.4.1.25506.2.43Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cDldp | 1.3.6.1.4.1.25506.2.43 | |||
identity DLDP (Device Link Detection Protocol) MIB | ||||
| Nhh3cDLDPMibObject | 1.3.6.1.4.1.25506.2.43.1 | |||
| Nhh3cDLDPConfigGroup | 1.3.6.1.4.1.25506.2.43.1.1 | |||
| Shh3cDLDPWorkMode | 1.3.6.1.4.1.25506.2.43.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The work mode of DLDP. Normal mode means DLDP does not detect neighbor on its own initiative when all neighbors aged. Enhance mode means DLDP detects neighbor on its own initiative when all neighbors aged.
| ||||
| Shh3cDLDPSystemEnable | 1.3.6.1.4.1.25506.2.43.1.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current DLDP enable or disable systematically. This node only supports set operation. If setting it to true, all the fiber ports will enable DLDP and the agent automatically creates new rows for each port in hh3cDLDPPortDLDPTable. If setting it to false, all the fiber ports will disable DLDP and the agent automatically destroy the corresponding rows in hh3cDLDPPortDLDPTable. | ||||
| Shh3cDLDPSystemReset | 1.3.6.1.4.1.25506.2.43.1.1.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current DLDP reset systematically. This node only supports set operation. If the value of hh3cDLDPSystemReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up. If hh3cDLDPPortDLDPState is not disable, it does not change. | ||||
| Shh3cDLDPInterval | 1.3.6.1.4.1.25506.2.43.1.1.4 | Integer32 (1..100) | RW | |
scalar · Integer32 (1..100) · read-write · current The interval of sending an advertisement PDU. unit : second | ||||
| Shh3cDLDPAuthenticationMode | 1.3.6.1.4.1.25506.2.43.1.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Type of authentication mode.
| ||||
| Shh3cDLDPAuthenticationPassword | 1.3.6.1.4.1.25506.2.43.1.1.6 | OCTET STRING (SIZE (1..53)) | RW | |
scalar · OCTET STRING (SIZE (1..53)) · read-write · current This is the password for authentication. If the value of hh3cDLDPAuthenticationMode is null, the user cannot set this node. If the value of hh3cDLDPAuthenticationMode is simple or MD5, the user must set this node with a string. When the user gets or walks this node, it displays a cipher password if hh3cDLDPAuthenticationMode is MD5 or simple or a zero-length string if hh3cDLDPAuthenticationMode is null. | ||||
| Shh3cDLDPUnidirectionalShutdown | 1.3.6.1.4.1.25506.2.43.1.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current The mode of unidirectional shutdown and bidirectional startup. It indicates the port shutdown mode when a link becomes unidirectional and port startup mode when the link becomes bidirectional. In auto mode, DLDP shuts down a port when detecting a unidirectional link and brings up the port when the link becomes bidirectional. In manual mode, a port requires manual shutdown when DLDP detects a unidirectional link and the port requires manual startup when the link becomes bidirectional.In hybrid mode, DLDP shuts down a port when detecting a unidirectional link and the port requires manual startup when the link becomes bidirectional.
| ||||
| Thh3cDLDPPortStateTable | 1.3.6.1.4.1.25506.2.43.1.2 | NA | ||
table · not-accessible · current The table of the Ethernet ports of a LAN switch. | ||||
| Rhh3cDLDPPortStateEntry | 1.3.6.1.4.1.25506.2.43.1.2.1 | NA | ||
| Chh3cDLDPPortState | 1.3.6.1.4.1.25506.2.43.1.2.1.1 | EnabledStatus | RW | |
column · EnabledStatus · read-write · current State of a port. If setting it to enabled, the port will enable DLDP and a new row will be added in hh3cDLDPPortDLDPTable for this port. If setting it to disabled, the port will disable DLDP and the corresponding row will be destroyed in hh3cDLDPPortDLDPTable. | ||||
| Thh3cDLDPPortDLDPTable | 1.3.6.1.4.1.25506.2.43.1.3 | NA | ||
table · not-accessible · current Table of a LAN switch's ports, which enable DLDP. | ||||
| Rhh3cDLDPPortDLDPEntry | 1.3.6.1.4.1.25506.2.43.1.3.1 | NA | ||
| Chh3cDLDPPortDLDPState | 1.3.6.1.4.1.25506.2.43.1.3.1.1 | DLDPStatus | RO | |
column · DLDPStatus · read-only · current Operating state of DLDP on the port. It is relational with hh3cDLDPPortState and hh3cDLDPLinkState. | ||||
| Chh3cDLDPLinkState | 1.3.6.1.4.1.25506.2.43.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The link state of the port.
| ||||
| Chh3cDLDPPortDLDPReset | 1.3.6.1.4.1.25506.2.43.1.3.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current DLDP reset systematically. This node only supports set operation. If the value of hh3cDLDPPortDLDPReset is true, and the current state is disable, it will change to inactive while the port is down or active while the port is up. | ||||
| Thh3cDLDPNeighborTable | 1.3.6.1.4.1.25506.2.43.1.4 | NA | ||
table · not-accessible · current Table of a port's neighbors. | ||||
| Rhh3cDLDPNeighborEntry | 1.3.6.1.4.1.25506.2.43.1.4.1 | NA | ||
row · not-accessible · current The information of a neighbor. | ||||
| Chh3cDLDPNeighborBridgeMac | 1.3.6.1.4.1.25506.2.43.1.4.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current The bridge MAC address of a neighbor. | ||||
| Chh3cDLDPNeighborPortIndex | 1.3.6.1.4.1.25506.2.43.1.4.1.2 | Integer32 (0..2147483647) | NA | |
column · Integer32 (0..2147483647) · not-accessible · current The port index of a neighbor. | ||||
| Chh3cDLDPNeighborState | 1.3.6.1.4.1.25506.2.43.1.4.1.3 | DLDPNeighborStatus | RO | |
column · DLDPNeighborStatus · read-only · current The state of a neighbor. | ||||
| Chh3cDLDPNeighborAgingTime | 1.3.6.1.4.1.25506.2.43.1.4.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current The aging time of a neighbor. unit: second. | ||||
| Nhh3cDLDPTrapObject | 1.3.6.1.4.1.25506.2.43.2 | |||
| Nhh3cDLDPNotification | 1.3.6.1.4.1.25506.2.43.2.1 | |||
| !hh3cDLDPUnidirectionalPort | 1.3.6.1.4.1.25506.2.43.2.1.1 | |||
notification · current It will send a SNMP trap when the state of a port has changed to unidirectional-link.
| ||||
Textual conventions
DLDPNeighborStatusINTEGERbidirection(2)unidirection(1)unknown(3)The current state of the neighbor of a port. This object has three defined values: - 'unidirection', which indicates an unidirectional communication between the port and it's neighbor. - 'bidirection', which indicates a bidirectional communication between the port and it's neighbor. - 'unknown', which indicates that the port does not know the communication mode between it and it's neighbor. When the user get or walk the 'hh3cDLDPNeighborState' objects (below) these status will output.
DLDPStatusINTEGERactive(3)advertisement(4)disable(6)inactive(2)initial(1)probe(5)Operating state of DLDP on the port. This object has six defined values: - 'initial', which indicates that the Ethernet port does not enable DLDP. This status does not appear in the 'hh3cDLDPPortDLDPState' object (below) because the port which is not enabled DLDP does not appear in 'hh3cDLDPPortDLDPTable', it appears in 'hh3cDLDPPortStateTable'. - 'inactive', which indicates that the Ethernet port enables DLDP and the link status of the port is down. - 'active', which indicates that the Ethernet port enables DLDP and the link status of the port is up. - 'advertisement', which indicates that all neighbors of the port are bidirectional communication. - 'probe', which indicates that the port sends PDU to detect the communication mode between it and it's neighbors. - 'disable', which indicates that an unidirectional communication between the port and it's neighbor. When the user get or walk the 'hh3cDLDPPortDLDPState' objects (below) these status will output.
EnabledStatusINTEGERdisabled(2)enabled(1)The current state of the Ethernet port. This object has two defined values: - 'enabled', which indicates that the Ethernet port enables DLDP. - 'disabled', which indicates that the Ethernet port does not enable DLDP.
Traps / Notifications
- hh3cDLDPUnidirectionalPort
1.3.6.1.4.1.25506.2.43.2.1.1