HH3C-CONFIG-MAN-MIB
H3CThis MIB contains objects for managing the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB.
snmptranslate -m HH3C-CONFIG-MAN-MIB -Tpsnmpwalk -v2c -c <community> -m HH3C-CONFIG-MAN-MIB <host> 1.3.6.1.4.1.25506.2.4Imports
| HH3C-OID-MIB | hh3cCommon |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ihh3cConfig | 1.3.6.1.4.1.25506.2.4 | |||
identity This MIB contains objects for managing the system configuration. It contains the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. There are no constraints on this MIB. | ||||
| Nhh3cConfigManObjects | 1.3.6.1.4.1.25506.2.4.1 | |||
| Nhh3cCfgLog | 1.3.6.1.4.1.25506.2.4.1.1 | |||
| Shh3cCfgRunModifiedLast | 1.3.6.1.4.1.25506.2.4.1.1.1 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The object records the value of sysUpTime when the current configuration running in the system was last modified. The value will be changed immediately after the system detects that the current configuration has been changed. | ||||
| Shh3cCfgRunSavedLast | 1.3.6.1.4.1.25506.2.4.1.1.2 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hh3cCfgRunModifiedLast, the current configuration has been modified but not saved. | ||||
| Shh3cCfgStartModifiedLast | 1.3.6.1.4.1.25506.2.4.1.1.3 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current The object records the value of sysUpTime when the next-startup configuration used currently was last modified. It may have been modified by a save operation of the current configuration running in the system or other methods such as copy. | ||||
| Shh3cCfgLogLimitedEntries | 1.3.6.1.4.1.25506.2.4.1.1.4 | Integer32 (0..2147483647) | RO | |
scalar · Integer32 (0..2147483647) · read-only · current The object shows the maximum number of rows in hh3cCfgLogTable. The value supported by the system is 10. | ||||
| Shh3cCfgLogDeletedEntries | 1.3.6.1.4.1.25506.2.4.1.1.5 | Counter32 | RO | |
scalar · Counter32 · read-only · current The total number of rows deleted from hh3cCfgLogTable. | ||||
| Shh3cCfgLogWantBackup | 1.3.6.1.4.1.25506.2.4.1.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current Decide whether to back up the values of objects for hh3cCfgLog. | ||||
| Thh3cCfgLogTable | 1.3.6.1.4.1.25506.2.4.1.1.7 | NA | ||
table · not-accessible · current Table for logging configuration operations on device . | ||||
| Rhh3cCfgLogEntry | 1.3.6.1.4.1.25506.2.4.1.1.7.1 | NA | ||
| Chh3cCfgLogIndex | 1.3.6.1.4.1.25506.2.4.1.1.7.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current Index of the table beginning from 1. | ||||
| Chh3cCfgLogTime | 1.3.6.1.4.1.25506.2.4.1.1.7.1.2 | TimeTicks | RO | |
column · TimeTicks · read-only · current Specify the sysUpTime when the configuration log was generated. | ||||
| Chh3cCfgLogSrcCmd | 1.3.6.1.4.1.25506.2.4.1.1.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Specify the source command which brought the log. Currently, we provide the following types of sources: 1.cmdLine(1):configure log instigated by command line. 2.snmp(2):configure log instigated by SNMPS. 3.other(3):configure log instigated by other source unknown.
| ||||
| Chh3cCfgLogSrcData | 1.3.6.1.4.1.25506.2.4.1.1.7.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current The source of the configuration data event. erase erasing destination runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
| ||||
| Chh3cCfgLogDesData | 1.3.6.1.4.1.25506.2.4.1.1.7.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The destination for the configuration data event. unknown unknown runningData operational data alive commandSource the command source itself startupData what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
| ||||
| Chh3cCfgLogTerminalType | 1.3.6.1.4.1.25506.2.4.1.1.7.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Specifies the terminal type. If hh3cCfgLogSrcCmd is not 'cmdLine', use 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): console interface. terminal(4): generic terminal. virtual(5): virtual terminal such as Telnet. auxiliary(6): auxiliary interface.
| ||||
| Chh3cCfgLogTerminalUser | 1.3.6.1.4.1.25506.2.4.1.1.7.1.7 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The name of logging user which is available when hh3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string. | ||||
| Chh3cCfgLogTerminalNum | 1.3.6.1.4.1.25506.2.4.1.1.7.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Specifies the terminal number. If hh3cCfgLogSrcCmd is not 'cmdLine', use '-1' | ||||
| Chh3cCfgLogTerminalLocation | 1.3.6.1.4.1.25506.2.4.1.1.7.1.9 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The location of logging user which is available when hh3cCfgLogSrcCmd is 'cmdLine'. Other, a zero length string. | ||||
| Chh3cCfgLogCmdSrcAddress | 1.3.6.1.4.1.25506.2.4.1.1.7.1.10 | IpAddress | RO | deprecated |
column · IpAddress · read-only · deprecated The address from which a request comes when the value of hh3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hh3cCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. This object is replaced by hh3cCfgLogCmdSrcAddrRev for it only support IPv4. | ||||
| Chh3cCfgLogVirHost | 1.3.6.1.4.1.25506.2.4.1.1.7.1.11 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The host name of remote system connected if hh3cCfgLogTerminalType has the value of 'virtual'. Other, a zero length string. | ||||
| Chh3cCfgLogUserName | 1.3.6.1.4.1.25506.2.4.1.1.7.1.12 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The user name used when hh3cCfgLogSrcData or hh3cCfgLogDesData has the value of 'netFtp'. Other, a zero length string. | ||||
| Chh3cCfgLogServerAddress | 1.3.6.1.4.1.25506.2.4.1.1.7.1.13 | IpAddress | RO | deprecated |
column · IpAddress · read-only · deprecated The remote server address when hh3cCfgLogSrcData or hh3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. This object is replaced by hh3cCfgLogServerAddrRev for it only support IPv4. | ||||
| Chh3cCfgLogFile | 1.3.6.1.4.1.25506.2.4.1.1.7.1.14 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The current configuration file name when hh3cCfgLogSrcData has the value of 'netFtp', and hh3cCfgLogDesData has the value of 'startupData'. Other, a zero length string. | ||||
| Chh3cCfgLogCmdSrcAddrType | 1.3.6.1.4.1.25506.2.4.1.1.7.1.15 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of IP address for the hh3cCfgLogCmdSrcAddrRev. | ||||
| Chh3cCfgLogCmdSrcAddrRev | 1.3.6.1.4.1.25506.2.4.1.1.7.1.16 | InetAddress | RO | |
column · InetAddress · read-only · current The address from which a request comes when the value of hh3cCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hh3cCfgLogTerminalType is 'virtual'. Other, the value of 0.0.0.0. | ||||
| Chh3cCfgLogCmdSrcAddrVPNName | 1.3.6.1.4.1.25506.2.4.1.1.7.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current The VPN instance of this operation uses. | ||||
| Chh3cCfgLogServerAddrType | 1.3.6.1.4.1.25506.2.4.1.1.7.1.18 | InetAddressType | RO | |
column · InetAddressType · read-only · current The type of IP address for the hh3cCfgLogServerAddrRev. | ||||
| Chh3cCfgLogServerAddrRev | 1.3.6.1.4.1.25506.2.4.1.1.7.1.19 | InetAddress | RO | |
column · InetAddress · read-only · current The remote server address when hh3cCfgLogSrcData or hh3cCfgLogDesData has the value of 'netFtp'. Other, a value of 0.0.0.0. | ||||
| Chh3cCfgLogServerAddrVPNName | 1.3.6.1.4.1.25506.2.4.1.1.7.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current The VPN instance of this operation uses. | ||||
| Shh3cCfgFirstTrapTime | 1.3.6.1.4.1.25506.2.4.1.1.8 | TimeTicks | AN | |
scalar · TimeTicks · accessible-for-notify · current Time when the first trap is sent. | ||||
| Nhh3cCfgOperate | 1.3.6.1.4.1.25506.2.4.1.2 | |||
| Shh3cCfgOperateGlobalEntryLimit | 1.3.6.1.4.1.25506.2.4.1.2.1 | Integer32 (1..10) | RO | |
scalar · Integer32 (1..10) · read-only · current The maximum number of copy entries that may be held in hh3cCfgOperateTable. A particular setting does not guarantee that much data can be held. | ||||
| Shh3cCfgOperateEntryAgeOutTime | 1.3.6.1.4.1.25506.2.4.1.2.2 | Integer32 (1..60) | RW | |
scalar · Integer32 (1..60) · read-write · current The number of minutes an unactive hh3cCfgOperateEntry SHOULD be kept in the hh3cCfgOperateTable before it is active. The object is a factor taken account of when it needs delete some rows make room in hh3cCfgOperateTable.
| ||||
| Shh3cCfgOperateResultGlobalEntryLimit | 1.3.6.1.4.1.25506.2.4.1.2.3 | Integer32 (1..50) | RW | |
scalar · Integer32 (1..50) · read-write · current The maximum number of copy entries that may be held in hh3cCfgOperateResultTable. A particular setting does not guarantee that much data can be held. | ||||
| Thh3cCfgOperateTable | 1.3.6.1.4.1.25506.2.4.1.2.4 | NA | ||
table · not-accessible · current A table of config-operation requests. | ||||
| Rhh3cCfgOperateEntry | 1.3.6.1.4.1.25506.2.4.1.2.4.1 | NA | ||
| Chh3cCfgOperateIndex | 1.3.6.1.4.1.25506.2.4.1.2.4.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The unique index value of a row in this table. | ||||
| Chh3cCfgOperateType | 1.3.6.1.4.1.25506.2.4.1.2.4.1.2 | ConfigOperationType | RC | |
column · ConfigOperationType · read-create · current Specify the type of operation on configuration. | ||||
| Chh3cCfgOperateProtocol | 1.3.6.1.4.1.25506.2.4.1.2.4.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current If the value of hh3cCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this node specify the protocol to be used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hh3cCfgOperateType , this object may be ignored by the implementation. when clusterftp or clustertftp is selected, the hh3cCfgOperateServerAddress needn't be set, the server address can be acquired automatically, the value of hh3cCfgOperateServerAddress is uncertain during operation. both member switch and commander switch can use them if they support HGMP v2.
| ||||
| Chh3cCfgOperateFileName | 1.3.6.1.4.1.25506.2.4.1.2.4.1.4 | DisplayString (SIZE (1..128)) | RC | |
column · DisplayString (SIZE (1..128)) · read-create · current When the object of hh3cCfgOperateType has the value of net2Startup, net2running, running2Net, running2File or file2Running, the value must be specified. The file name may include the path if applicable. If the value of hh3cCfgOperateType is net2Startup or net2running, this node specify the source file name of transfers. If the value of hh3cCfgOperateType is running2Net, this node specify the destination file name of transfers. When hh3cCfgOperateType has the value of startup2net, the object may not be created instead of using the file name of startup configuration file. If the value of hh3cCfgOperateType is running2File or file2Running, this node specifies the file name to be written or loaded. | ||||
| Chh3cCfgOperateServerAddress | 1.3.6.1.4.1.25506.2.4.1.2.4.1.5 | IpAddress | RC | deprecated |
column · IpAddress · read-create · deprecated When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted. This object is replaced by hh3cCfgOperateSrvAddrRev for it only support IPv4. | ||||
| Chh3cCfgOperateUserName | 1.3.6.1.4.1.25506.2.4.1.2.4.1.6 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current When the operation type is running2Net,net2Running,net2Startup or startup2net, the user name for the ftp server from/to which to download/upload should be specified. The object must be created if hh3cCfgOperateProtocol has the value of ftp. | ||||
| Chh3cCfgOperateUserPassword | 1.3.6.1.4.1.25506.2.4.1.2.4.1.7 | DisplayString (SIZE (0..40)) | RC | |
column · DisplayString (SIZE (0..40)) · read-create · current When the operation type is running2Net,net2Running,net2Startup or startup2net, the user password for the ftp server from/to which to download/upload should be specified. The object must be created if hh3cCfgOperateProtocol has the value of ftp. | ||||
| Chh3cCfgOperateEndNotificationSwitch | 1.3.6.1.4.1.25506.2.4.1.2.4.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Specifies whether or not a notification should be issued on the completion of the operation. | ||||
| Chh3cCfgOperateRowStatus | 1.3.6.1.4.1.25506.2.4.1.2.4.1.9 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this table entry. When the status is active all the object's value in the entry is not allowed to be modified. | ||||
| Chh3cCfgOperateServerPort | 1.3.6.1.4.1.25506.2.4.1.2.4.1.10 | Integer32 (0..65535) | RC | |
column · Integer32 (0..65535) · read-create · current When the operation type is running2Net, net2Running, net2Startup or startup2Net, this node is used for specifying the remote port number. If the value is 0 or not specified, the known port number will be used. | ||||
| Chh3cCfgOperateSrvAddrType | 1.3.6.1.4.1.25506.2.4.1.2.4.1.11 | InetAddressType | RC | |
column · InetAddressType · read-create · current The type of IP address for hh3cCfgOperateSrvAddrRev. | ||||
| Chh3cCfgOperateSrvAddrRev | 1.3.6.1.4.1.25506.2.4.1.2.4.1.12 | InetAddress | RC | |
column · InetAddress · read-create · current When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the ftp/tftp server from/to which to download/upload must be specified. | ||||
| Chh3cCfgOperateSrvVPNName | 1.3.6.1.4.1.25506.2.4.1.2.4.1.13 | DisplayString | RC | |
column · DisplayString · read-create · current The VPN instance of this operation uses. | ||||
| Thh3cCfgOperateResultTable | 1.3.6.1.4.1.25506.2.4.1.2.5 | NA | ||
table · not-accessible · current A table of config-operation requests result. | ||||
| Rhh3cCfgOperateResultEntry | 1.3.6.1.4.1.25506.2.4.1.2.5.1 | NA | ||
row · not-accessible · current The result entries of configuration operation requests. | ||||
| Chh3cCfgOperateResultIndex | 1.3.6.1.4.1.25506.2.4.1.2.5.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached. | ||||
| Chh3cCfgOperateResultOptIndex | 1.3.6.1.4.1.25506.2.4.1.2.5.1.2 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The operation index in the hh3cCfgOperateTable. | ||||
| Chh3cCfgOperateResultOpType | 1.3.6.1.4.1.25506.2.4.1.2.5.1.3 | ConfigOperationType | RO | |
column · ConfigOperationType · read-only · current The operation type in the hh3cCfgOperateTable. | ||||
| Chh3cCfgOperateState | 1.3.6.1.4.1.25506.2.4.1.2.5.1.4 | ConfigOperationStateType | RO | |
column · ConfigOperationStateType · read-only · current The operation state type in the hh3cCfgOperateTable. | ||||
| Chh3cCfgOperateTime | 1.3.6.1.4.1.25506.2.4.1.2.5.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current Record the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes. | ||||
| Chh3cCfgOperateEndTime | 1.3.6.1.4.1.25506.2.4.1.2.5.1.6 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime when the configuration operation is finished. | ||||
| Chh3cCfgOperFailReason | 1.3.6.1.4.1.25506.2.4.1.2.5.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current The failure reasons of configuration operation. | ||||
| Chh3cCfgOperateFailCmd | 1.3.6.1.4.1.25506.2.4.1.2.5.1.8 | DisplayString (SIZE (0..512)) | RO | |
column · DisplayString (SIZE (0..512)) · read-only · current The failure cmd of configuration operation. | ||||
| Chh3cCfgOperateFailCmdView | 1.3.6.1.4.1.25506.2.4.1.2.5.1.9 | DisplayString (SIZE (0..264)) | RO | |
column · DisplayString (SIZE (0..264)) · read-only · current The failure cmd view of configuration operation. | ||||
| Chh3cCfgOperateFailCmdReason | 1.3.6.1.4.1.25506.2.4.1.2.5.1.10 | DisplayString (SIZE (0..255)) | RO | |
column · DisplayString (SIZE (0..255)) · read-only · current The failure cmd reasons of configuration operation. The failed reason is : 'Failed to execute command.' 'Failed to parse command.' | ||||
| Nhh3cCfgExecuteOperate | 1.3.6.1.4.1.25506.2.4.1.2.6 | |||
| Shh3cCfgExecuteOperateResultEntryLimit | 1.3.6.1.4.1.25506.2.4.1.2.6.1 | Integer32 (5..20) | RW | |
scalar · Integer32 (5..20) · read-write · current The maximum number of ConfigOperationType entries that may be held in hh3cCfgExecuteResultTable. A particular setting does not guarantee that much data can be held. | ||||
| Thh3cCfgExecuteResultTable | 1.3.6.1.4.1.25506.2.4.1.2.6.2 | NA | ||
table · not-accessible · current A table of configuration execute result. | ||||
| Rhh3cCfgExecuteResultEntry | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1 | NA | ||
row · not-accessible · current The result entries of configuration execute operation. | ||||
| Chh3cCfgExecuteResultIndex | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1.1 | Integer32 (1..2147483647) | NA | |
column · Integer32 (1..2147483647) · not-accessible · current The index of Table, which is an incremental integer. The maximum value of the node is 2147483647. The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached. | ||||
| Chh3cCfgExecuteResultOptIndex | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1.2 | Integer32 (1..2147483647) | RO | |
column · Integer32 (1..2147483647) · read-only · current The configuration execute operation index in the hh3cCfgExecuteResultTable. | ||||
| Chh3cCfgExecuteResultOpType | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1.3 | ConfigOperationType | RO | |
column · ConfigOperationType · read-only · current The operation type in the hh3cCfgExecuteResultTable. | ||||
| Chh3cCfgExecuteState | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1.4 | ConfigOperationStateType | RO | |
column · ConfigOperationStateType · read-only · current Record the status of the specified operation. | ||||
| Chh3cCfgExecuteTime | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1.5 | TimeTicks | RO | |
column · TimeTicks · read-only · current Record the time of the execution starts. | ||||
| Chh3cCfgExecuteEndTime | 1.3.6.1.4.1.25506.2.4.1.2.6.2.1.6 | TimeTicks | RO | |
column · TimeTicks · read-only · current Record the time of the execution is finished. | ||||
| Shh3cCfgReset | 1.3.6.1.4.1.25506.2.4.1.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Reboot the device with the default configuration.
| ||||
| Shh3cCfgReset2 | 1.3.6.1.4.1.25506.2.4.1.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current normal:do nothing. reset :reboot the device with the default configuration. 'normal' will be returned when getting. This node differs from hh3cCfgReset in value.
| ||||
| Nhh3cConfigManNotifications | 1.3.6.1.4.1.25506.2.4.2 | |||
| !hh3cCfgManEventlog | 1.3.6.1.4.1.25506.2.4.2.1 | |||
notification · current The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different. | ||||
| !hh3cCfgOperateCompletion | 1.3.6.1.4.1.25506.2.4.2.2 | |||
notification · current When create hh3cCfgOperateTable successfully, a notification may be generated. | ||||
| !hh3cCfgInvalidConfigFile | 1.3.6.1.4.1.25506.2.4.2.3 | |||
notification · current When the configuration file is invalid, this notification will be generated. | ||||
| Nhh3cConfigManConformance | 1.3.6.1.4.1.25506.2.4.3 | |||
| Nhh3cConfigManCompliances | 1.3.6.1.4.1.25506.2.4.3.1 | |||
| Mhh3cConfigManCompliance | 1.3.6.1.4.1.25506.2.4.3.1.1 | |||
compliance · current The statement of compliance for those implementing the configuration management MIB. | ||||
| Nhh3cConfigManGroups | 1.3.6.1.4.1.25506.2.4.3.2 | |||
| Ghh3cCfgManLogGroup | 1.3.6.1.4.1.25506.2.4.3.2.1 | |||
group · current A collection of objects configuration log group.
| ||||
| Ghh3cCfgOperateGroup | 1.3.6.1.4.1.25506.2.4.3.2.2 | |||
group · current A group of configuration operation.
| ||||
| Ghh3cCfgManNotificationGroup | 1.3.6.1.4.1.25506.2.4.3.2.3 | |||
group · current Collection of notification objects. | ||||
| Nhh3cConfigManTrapV2 | 1.3.6.1.4.1.25506.2.4.4 | |||
| Nhh3cConfigManTrapV2Prefix | 1.3.6.1.4.1.25506.2.4.4.0 | |||
| !hh3cCfgBackupToServerSuccess | 1.3.6.1.4.1.25506.2.4.4.0.1 | |||
notification · current This notification is generated when configuration backup succeeds. | ||||
| !hh3cCfgBackupToServerFailed | 1.3.6.1.4.1.25506.2.4.4.0.2 | |||
notification · current This notification is generated when configuration backup fails. | ||||
| !hh3cCfgRestoreSuccess | 1.3.6.1.4.1.25506.2.4.4.0.3 | |||
notification · current This notification is generated when configuration restoration succeeds.
| ||||
| !hh3cCfgSaveFailNotify | 1.3.6.1.4.1.25506.2.4.4.0.4 | |||
notification · current This notification is generated when a configuration save operation fails. | ||||
| !hh3cCfgFileChange | 1.3.6.1.4.1.25506.2.4.4.0.5 | |||
notification · current This notification is generated when a startup configuration file is modified. | ||||
| Nhh3cConfigManTrapInfor | 1.3.6.1.4.1.25506.2.4.5 | |||
| Shh3cCfgBackupToServerIPType | 1.3.6.1.4.1.25506.2.4.5.1 | InetAddressType | AN | |
scalar · InetAddressType · accessible-for-notify · current IP address type of the configuration backup server | ||||
| Shh3cCfgBackupToServerIP | 1.3.6.1.4.1.25506.2.4.5.2 | InetAddress | AN | |
scalar · InetAddress · accessible-for-notify · current IP address of the configuration backup server | ||||
| Shh3cCfgBackupToServerVPNName | 1.3.6.1.4.1.25506.2.4.5.3 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current VPN instance to which the configuration backup server belongs | ||||
| Shh3cCfgBackupToServerTransType | 1.3.6.1.4.1.25506.2.4.5.4 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Protocol used for transferring the file to the backup server
| ||||
| Shh3cCfgBackupToServerFailReason | 1.3.6.1.4.1.25506.2.4.5.5 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current Configuration backup failure reason | ||||
| Shh3cCfgBackupToServerErrorCode | 1.3.6.1.4.1.25506.2.4.5.6 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Configuration backup failure error code. Authentication failed(1), Failed to save text file(2), Transfer failed(3), Failed to update file list(4) | ||||
| Shh3cCfgRestoreType | 1.3.6.1.4.1.25506.2.4.5.7 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current Type of the configuration file used for configuration restoration
| ||||
| Shh3cCfgSaveFailNotifyErrorNumber | 1.3.6.1.4.1.25506.2.4.5.8 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Error code for a configuration save failure. | ||||
| Shh3cCfgSaveFailNotifyDateTime | 1.3.6.1.4.1.25506.2.4.5.9 | DateAndTime (SIZE (8)) | AN | |
scalar · DateAndTime (SIZE (8)) · accessible-for-notify · current Time when the configuration save failure occurred. | ||||
| Shh3cCfgSaveFailNotifySrcChassis | 1.3.6.1.4.1.25506.2.4.5.10 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Number of the chassis where the configuration save failure occurred. | ||||
| Shh3cCfgSaveFailNotifySrcSlot | 1.3.6.1.4.1.25506.2.4.5.11 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Number of the slot where the configuration save failure occurred. | ||||
| Shh3cCfgSaveFailNotifySrcCpu | 1.3.6.1.4.1.25506.2.4.5.12 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Number of the CPU where the configuration save failure occurred. | ||||
| Shh3cCfgFileChangeUI | 1.3.6.1.4.1.25506.2.4.5.13 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Source that triggered configuration changes. | ||||
| Shh3cCfgFileChangeAction | 1.3.6.1.4.1.25506.2.4.5.14 | Integer32 | AN | |
scalar · Integer32 · accessible-for-notify · current Actions that triggered the configuration changes. | ||||
| Shh3cCfgFileChangeOperater | 1.3.6.1.4.1.25506.2.4.5.15 | DisplayString (SIZE (0..255)) | AN | |
scalar · DisplayString (SIZE (0..255)) · accessible-for-notify · current Name of the operator that triggered the configuration changes. | ||||
| Shh3cCfgFileChangeOperateTime | 1.3.6.1.4.1.25506.2.4.5.16 | DateAndTime (SIZE (8)) | AN | |
scalar · DateAndTime (SIZE (8)) · accessible-for-notify · current Time when the configuration changes were triggered. | ||||
| Shh3cCfgFileChangeFileType | 1.3.6.1.4.1.25506.2.4.5.17 | INTEGER | AN | |
scalar · INTEGER · accessible-for-notify · current File type that triggered configuration changes.
| ||||
Textual conventions
ConfigOperationStateTypeINTEGERopAuthFail(17)opCopyToSlaveFailure(22)opDeviceBusy(8)opDeviceError(10)opDeviceFull(12)opDeviceNotProgrammable(11)opDeviceOpenError(9)opFileChecksumError(15)opFileOpenError(13)opFileTransferError(14)opInProgress(1)opInvalidConfigFile(20)opInvalidDestName(6)opInvalidOperation(3)opInvalidProtocol(4)opInvalidServerAddress(7)opInvalidSourceName(5)opNoMemory(16)opSlaveFull(21)opSuccess(2)opTimeOut(18)opUnknownFailure(19)The status of the specified operation. opInProgress : Specified operation is active. opOperationSuccess : Specified operation is supported and completed successfully. opInvalidOperation : Command invalid or command/protocol/device combination unsupported. opInvalidProtocol : Invalid protocol specified. opInvalidSourceName : Invalid source file name specified. opInvalidDestName : Invalid target name specified. opInvalidServerAddress : Invalid server address specified. opDeviceBusy : Specified device is in use and locked by another process. opDeviceOpenError : Invalid device name. opDeviceError : Device read, write or erase error. opDeviceNotProgrammable : Device is read-only but a write or erase operation was specified. opDeviceFull : Device is filled to capacity. opFileOpenError : Invalid file name; file not found in partition. opFileTransferError : File transfer was unsuccessful; network failure. opFileChecksumError : File checksum in Flash failed. opNoMemory : System running low on memory. opAuthFail: Invalid user name or password. opTimeOut : File transfer was timeout. opUnknownFailure : Failure unknown. opInvalidConfigFile: Invalid configuration file. opSlaveFull : Operation failed for a standby MPU or subordinate device because of insufficient space. opCopyToSlaveFailure : Failed to copy the file to a standby MPU or subordinate device.ConfigOperationTypeINTEGERfile2Running(8)net2Running(4)net2Startup(5)running2File(7)running2Net(3)running2Startup(1)startup2Net(6)startup2Running(2)Specify operation types on configuration. Currently, the following types of operations are provided: running2Startup(1): Update the next-startup configuration file with the current configuration running in the system. This operation is equivalent to the 'save' command from command line. If no next-startup configuration file exists, then the default startup configuration file is created to save the data and this becomes the next-startup configuration file. startup2Running(2): Update the current configuration running in the system with the current startup configuration file. The commands in the file are executed as if they had been entered via the command line. If the current startup configuration file does not exist, the operation will fail with error opFileOpenError(13). running2Net(3): Send the current configuration running in the system to the network by using the specified file transfer protocol. net2Running(4): Update the current configuration running in the system with a remote file from the network by using the specified file transfer protocol. The commands in the file are executed as if they had been entered via the command line. net2Startup(5): Download a remote file to the local system by using the specified file transfer protocol and replace the next-startup configuration file. If the next-startup configuration file does not exist, the default startup configuration file is created to save the data and this becomes the next-startup configuration file. startup2Net(6): Send the next-startup configuration file to the network by using the specified file transfer protocol. If the next-startup configuration file does not exist, the operation will fail with error opFileOpenError(13). running2File(7): Write current configuration running in the system into a file that is specified by hh3cCfgOperateFileName. After this operation, the next-startup configuration file will not be changed. file2Running(8): Update the current configuration running in the system with a file that is specified by hh3cCfgOperateFileName. The commands in the file are executed as if they had been entered via the command line.
Traps / Notifications
- hh3cCfgBackupToServerFailed
1.3.6.1.4.1.25506.2.4.4.0.2 - hh3cCfgBackupToServerSuccess
1.3.6.1.4.1.25506.2.4.4.0.1 - hh3cCfgFileChange
1.3.6.1.4.1.25506.2.4.4.0.5 - hh3cCfgInvalidConfigFile
1.3.6.1.4.1.25506.2.4.2.3 - hh3cCfgManEventlog
1.3.6.1.4.1.25506.2.4.2.1 - hh3cCfgOperateCompletion
1.3.6.1.4.1.25506.2.4.2.2 - hh3cCfgRestoreSuccess
1.3.6.1.4.1.25506.2.4.4.0.3 - hh3cCfgSaveFailNotify
1.3.6.1.4.1.25506.2.4.4.0.4