OLD-CISCO-SYS-MIB
ciscoSystemssnmptranslate -m OLD-CISCO-SYS-MIB -Tpsnmpwalk -v2c -c <community> -m OLD-CISCO-SYS-MIB <host> 1.3.6.1.4.1.9.2.1Imports
| CISCO-SMI | local |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nlsystem | 1.3.6.1.4.1.9.2.1 | ||||||||||||||||
| SromId | 1.3.6.1.4.1.9.2.1.1 | DisplayString | RO | mandatory |
.1.3.6.1.4.1.9.2.1.2.0 = STRING: "PowerOn | ||||||||||||
scalar · DisplayString · read-only · mandatory This variable contains a printable octet string which contains the System Bootstrap description and version identification. Example values from LibreNMS test devices
| |||||||||||||||||
| SwhyReload | 1.3.6.1.4.1.9.2.1.2 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory This variable contains a printable octet string which contains the reason why the system was last restarted. | |||||||||||||||||
| ShostName | 1.3.6.1.4.1.9.2.1.3 | DisplayString | RO | mandatory | MAR-WLC-C9800 | ||||||||||||
scalar · DisplayString · read-only · mandatory This variable represents the name of the host in printable ascii characters. Example values from LibreNMS test devices
| |||||||||||||||||
| SdomainName | 1.3.6.1.4.1.9.2.1.4 | DisplayString | RO | mandatory | int.nutriasia.com.ph | ||||||||||||
scalar · DisplayString · read-only · mandatory This variable is the domain portion of the domain name of the host. Example values from LibreNMS test devices
| |||||||||||||||||
| SauthAddr | 1.3.6.1.4.1.9.2.1.5 | IpAddress | RO | mandatory | 10.183.37.87 | ||||||||||||
scalar · IpAddress · read-only · mandatory This variable contains the last SNMP authorization failure IP address. Example values from LibreNMS test devices
| |||||||||||||||||
| SbootHost | 1.3.6.1.4.1.9.2.1.6 | IpAddress | RO | mandatory | 0.0.0.0 | ||||||||||||
scalar · IpAddress · read-only · mandatory Contains the IP address of the host that supplied the currently running software. Example values from LibreNMS test devices
| |||||||||||||||||
| Sping | 1.3.6.1.4.1.9.2.1.7 | INTEGER | RW | obsolete | |||||||||||||
scalar · INTEGER · read-write · obsolete The ping mib object is obsolete as of IOS 10.2 It has been superseded by the Cisco Ping MIB | |||||||||||||||||
| SfreeMem | 1.3.6.1.4.1.9.2.1.8 | INTEGER | RO | obsolete | 1220335420 | ||||||||||||
scalar · INTEGER · read-only · obsolete The freeMem mib object is obsolete as of IOS 11.1 It has been replaced with the cisco memory pool mib Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferElFree | 1.3.6.1.4.1.9.2.1.9 | INTEGER | RO | mandatory | 1306 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of free buffer elements. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferElMax | 1.3.6.1.4.1.9.2.1.10 | INTEGER | RO | mandatory | 1000 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the maximum number of buffer elements. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferElHit | 1.3.6.1.4.1.9.2.1.11 | INTEGER | RO | mandatory | 55558095 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of buffer element hits. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferElMiss | 1.3.6.1.4.1.9.2.1.12 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of buffer element misses. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferElCreate | 1.3.6.1.4.1.9.2.1.13 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of buffer element creates. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmSize | 1.3.6.1.4.1.9.2.1.14 | INTEGER | RO | mandatory | 104 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the size of small buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmTotal | 1.3.6.1.4.1.9.2.1.15 | INTEGER | RO | mandatory | 1200 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the total number of small buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmFree | 1.3.6.1.4.1.9.2.1.16 | INTEGER | RO | mandatory | 1200 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of free small buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmMax | 1.3.6.1.4.1.9.2.1.17 | INTEGER | RO | mandatory | 2500 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the maximum number of small buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmHit | 1.3.6.1.4.1.9.2.1.18 | INTEGER | RO | mandatory | 16006928 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of small buffer hits. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmMiss | 1.3.6.1.4.1.9.2.1.19 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of small buffer misses. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmTrim | 1.3.6.1.4.1.9.2.1.20 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of small buffer trims. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferSmCreate | 1.3.6.1.4.1.9.2.1.21 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of small buffer creates. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdSize | 1.3.6.1.4.1.9.2.1.22 | INTEGER | RO | mandatory | 600 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the size of medium buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdTotal | 1.3.6.1.4.1.9.2.1.23 | INTEGER | RO | mandatory | 900 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the total number of medium buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdFree | 1.3.6.1.4.1.9.2.1.24 | INTEGER | RO | mandatory | 898 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of free medium buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdMax | 1.3.6.1.4.1.9.2.1.25 | INTEGER | RO | mandatory | 2000 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the maximum number of medium buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdHit | 1.3.6.1.4.1.9.2.1.26 | INTEGER | RO | mandatory | 11066775 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of medium buffer hits. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdMiss | 1.3.6.1.4.1.9.2.1.27 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of medium buffer misses. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdTrim | 1.3.6.1.4.1.9.2.1.28 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of medium buffer trims. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferMdCreate | 1.3.6.1.4.1.9.2.1.29 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of medium buffer creates. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgSize | 1.3.6.1.4.1.9.2.1.30 | INTEGER | RO | mandatory | 1536 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the size of big buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgTotal | 1.3.6.1.4.1.9.2.1.31 | INTEGER | RO | mandatory | 900 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the total number of big buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgFree | 1.3.6.1.4.1.9.2.1.32 | INTEGER | RO | mandatory | 899 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of free big buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgMax | 1.3.6.1.4.1.9.2.1.33 | INTEGER | RO | mandatory | 1800 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the maximum number of big buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgHit | 1.3.6.1.4.1.9.2.1.34 | INTEGER | RO | mandatory | 5073990 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of big buffer hits. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgMiss | 1.3.6.1.4.1.9.2.1.35 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of big buffer misses. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgTrim | 1.3.6.1.4.1.9.2.1.36 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of big buffer trims. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferBgCreate | 1.3.6.1.4.1.9.2.1.37 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of big buffer creates. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgSize | 1.3.6.1.4.1.9.2.1.38 | INTEGER | RO | mandatory | 5024 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the size of large buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgTotal | 1.3.6.1.4.1.9.2.1.39 | INTEGER | RO | mandatory | 100 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the total number of large buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgFree | 1.3.6.1.4.1.9.2.1.40 | INTEGER | RO | mandatory | 100 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of free large buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgMax | 1.3.6.1.4.1.9.2.1.41 | INTEGER | RO | mandatory | 300 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the maximum number of large buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgHit | 1.3.6.1.4.1.9.2.1.42 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of large buffer hits. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgMiss | 1.3.6.1.4.1.9.2.1.43 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of large buffer misses. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgTrim | 1.3.6.1.4.1.9.2.1.44 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of large buffer trims. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferLgCreate | 1.3.6.1.4.1.9.2.1.45 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of large buffer creates. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferFail | 1.3.6.1.4.1.9.2.1.46 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Count of the number of buffer allocation failures. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferNoMem | 1.3.6.1.4.1.9.2.1.47 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Count of the number of buffer create failures due to no free memory. Example values from LibreNMS test devices
| |||||||||||||||||
| SnetConfigAddr | 1.3.6.1.4.1.9.2.1.48 | IpAddress | RO | mandatory | 0.0.0.0 | ||||||||||||
scalar · IpAddress · read-only · mandatory Holds the address of the host that supplied the network-confg file. Example values from LibreNMS test devices
| |||||||||||||||||
| SnetConfigName | 1.3.6.1.4.1.9.2.1.49 | DisplayString | RO | mandatory | | ||||||||||||
scalar · DisplayString · read-only · mandatory Holds the name of the network configuration file. Example values from LibreNMS test devices
| |||||||||||||||||
| SnetConfigSet | 1.3.6.1.4.1.9.2.1.50 | DisplayString | WO | mandatory | |||||||||||||
scalar · DisplayString · write-only · mandatory Cause the loading of a new network-confg file using TFTP. | |||||||||||||||||
| ShostConfigAddr | 1.3.6.1.4.1.9.2.1.51 | IpAddress | RO | obsolete | 0.0.0.0 | ||||||||||||
scalar · IpAddress · read-only · obsolete Contains the address of the host that provided the host-config file. Example values from LibreNMS test devices
| |||||||||||||||||
| ShostConfigName | 1.3.6.1.4.1.9.2.1.52 | DisplayString | RO | obsolete | | ||||||||||||
scalar · DisplayString · read-only · obsolete Contains the name of the last configured host-confg file. Example values from LibreNMS test devices
| |||||||||||||||||
| ShostConfigSet | 1.3.6.1.4.1.9.2.1.53 | DisplayString | WO | obsolete | |||||||||||||
scalar · DisplayString · write-only · obsolete Cause the loading of a new host-confg file using TFTP. | |||||||||||||||||
| SwriteMem | 1.3.6.1.4.1.9.2.1.54 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Write configuration into non-volatile memory / erase config memory if 0. | |||||||||||||||||
| SwriteNet | 1.3.6.1.4.1.9.2.1.55 | DisplayString | WO | mandatory | |||||||||||||
scalar · DisplayString · write-only · mandatory Write configuration to host using TFTP. | |||||||||||||||||
| SbusyPer | 1.3.6.1.4.1.9.2.1.56 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory CPU busy percentage in the last 5 second period. Not the last 5 realtime seconds but the last 5 second period in the scheduler. Example values from LibreNMS test devices
| |||||||||||||||||
| SavgBusy1 | 1.3.6.1.4.1.9.2.1.57 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory 1 minute exponentially-decayed moving average of the CPU busy percentage. Example values from LibreNMS test devices
| |||||||||||||||||
| SavgBusy5 | 1.3.6.1.4.1.9.2.1.58 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory 5 minute exponentially-decayed moving average of the CPU busy percentage. Example values from LibreNMS test devices
| |||||||||||||||||
| SidleCount | 1.3.6.1.4.1.9.2.1.59 | INTEGER | RW | mandatory | 4920 | ||||||||||||
scalar · INTEGER · read-write · mandatory cisco internal variable. not to be used Example values from LibreNMS test devices
| |||||||||||||||||
| SidleWired | 1.3.6.1.4.1.9.2.1.60 | INTEGER | RW | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-write · mandatory cisco internal variable. not to be used Example values from LibreNMS test devices
| |||||||||||||||||
| SciscoContactInfo | 1.3.6.1.4.1.9.2.1.61 | DisplayString | RO | mandatory | cisco Systems, Inc.170 West Tasman Dr.San Jose,… | ||||||||||||
scalar · DisplayString · read-only · mandatory cisco's name and address Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgSize | 1.3.6.1.4.1.9.2.1.62 | INTEGER | RO | mandatory | 18024 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the size of huge buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgTotal | 1.3.6.1.4.1.9.2.1.63 | INTEGER | RO | mandatory | 20 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the total number of huge buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgFree | 1.3.6.1.4.1.9.2.1.64 | INTEGER | RO | mandatory | 20 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of free huge buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgMax | 1.3.6.1.4.1.9.2.1.65 | INTEGER | RO | mandatory | 33 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the maximum number of huge buffers. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgHit | 1.3.6.1.4.1.9.2.1.66 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of huge buffer hits. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgMiss | 1.3.6.1.4.1.9.2.1.67 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of huge buffer misses. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgTrim | 1.3.6.1.4.1.9.2.1.68 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of huge buffer trims. Example values from LibreNMS test devices
| |||||||||||||||||
| SbufferHgCreate | 1.3.6.1.4.1.9.2.1.69 | INTEGER | RO | mandatory | 1 | ||||||||||||
scalar · INTEGER · read-only · mandatory Contains the number of huge buffer creates. Example values from LibreNMS test devices
| |||||||||||||||||
| SnetConfigProto | 1.3.6.1.4.1.9.2.1.70 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Holds the protocol that supplied the network-confg file. Example values from LibreNMS test devices
| |||||||||||||||||
| ShostConfigProto | 1.3.6.1.4.1.9.2.1.71 | INTEGER | RO | mandatory | 0 | ||||||||||||
scalar · INTEGER · read-only · mandatory Holds the protocol that supplied the host- confg file. Example values from LibreNMS test devices
| |||||||||||||||||
| SsysConfigAddr | 1.3.6.1.4.1.9.2.1.72 | IpAddress | RO | mandatory | 0.0.0.0 | ||||||||||||
scalar · IpAddress · read-only · mandatory Holds the address of the host that supplied the system boot image. Example values from LibreNMS test devices
| |||||||||||||||||
| SsysConfigName | 1.3.6.1.4.1.9.2.1.73 | DisplayString | RO | mandatory | bootflash:packages.conf | ||||||||||||
scalar · DisplayString · read-only · mandatory Holds the name of the system boot image. Example values from LibreNMS test devices
| |||||||||||||||||
| SsysConfigProto | 1.3.6.1.4.1.9.2.1.74 | INTEGER | RO | mandatory | 3 | ||||||||||||
scalar · INTEGER · read-only · mandatory Holds the protocol that supplied the system boot image. Example values from LibreNMS test devices
| |||||||||||||||||
| SsysClearARP | 1.3.6.1.4.1.9.2.1.75 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Perform a clearing of the entire ARP cache and invalidation of route caches. | |||||||||||||||||
| SsysClearInt | 1.3.6.1.4.1.9.2.1.76 | INTEGER | WO | mandatory | |||||||||||||
scalar · INTEGER · write-only · mandatory Clear interface given IfIndex as value. | |||||||||||||||||
| SenvPresent | 1.3.6.1.4.1.9.2.1.77 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is there an environmental monitor card in this box?, 0 - No, 1-AGS card present, wrong firmware, 2-AGS CARD present, firmware ok, 3-7000 support | |||||||||||||||||
| SenvTestPt1Descr | 1.3.6.1.4.1.9.2.1.78 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of the test point 1. Typically ambient air or the temperature of air entering the router | |||||||||||||||||
| SenvTestPt1Measure | 1.3.6.1.4.1.9.2.1.79 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Current value of test point 1. Typically a temperature in centigrade. | |||||||||||||||||
| SenvTestPt2Descr | 1.3.6.1.4.1.9.2.1.80 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of the test point 2. Typically airflow or the temperature of air leaving the router | |||||||||||||||||
| SenvTestPt2Measure | 1.3.6.1.4.1.9.2.1.81 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Current value of test point 2. Typically a temperature in centigrade. | |||||||||||||||||
| SenvTestPt3Descr | 1.3.6.1.4.1.9.2.1.82 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of the test point 3. Typically +5 volt | |||||||||||||||||
| SenvTestPt3Measure | 1.3.6.1.4.1.9.2.1.83 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Current value of test point 3. Typically the value in millivolts of the +5v supply | |||||||||||||||||
| SenvTestPt4Descr | 1.3.6.1.4.1.9.2.1.84 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of the test point 4. Typically +12 volt | |||||||||||||||||
| SenvTestPt4Measure | 1.3.6.1.4.1.9.2.1.85 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Current value of test point 4. Typically the value in millivolts of the +12v supply | |||||||||||||||||
| SenvTestPt5Descr | 1.3.6.1.4.1.9.2.1.86 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of the test point 5. Typically -12 volt | |||||||||||||||||
| SenvTestPt5Measure | 1.3.6.1.4.1.9.2.1.87 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Current value of test point 5. Typically the value in millivolts of the -12v supply | |||||||||||||||||
| SenvTestPt6Descr | 1.3.6.1.4.1.9.2.1.88 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of the test point 6. Typically -5 volt | |||||||||||||||||
| SenvTestPt6Measure | 1.3.6.1.4.1.9.2.1.89 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Current value of test point 6. Typically the value in millivolts of the -5v supply | |||||||||||||||||
| SenvTestPt1MarginVal | 1.3.6.1.4.1.9.2.1.90 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value at which the router will shutdown. Typically the ambient air temperature that will shut the router down. (e.g. 43) | |||||||||||||||||
| SenvTestPt2MarginVal | 1.3.6.1.4.1.9.2.1.91 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value at which the router will shutdown. Typically the airflow air temperature that will shut the router down. (e.g. 58) | |||||||||||||||||
| SenvTestPt3MarginPercent | 1.3.6.1.4.1.9.2.1.92 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory +/- Percentage that will shut the router down, (e.g. 10%) typically +5 volt | |||||||||||||||||
| SenvTestPt4MarginPercent | 1.3.6.1.4.1.9.2.1.93 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory +/- Percentage that will shut the router down, (e.g. 15%) typically +12 volt | |||||||||||||||||
| SenvTestPt5MarginPercent | 1.3.6.1.4.1.9.2.1.94 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory +/- Percentage that will shut the router down, (e.g. 15%) typically -12 volt | |||||||||||||||||
| SenvTestPt6MarginPercent | 1.3.6.1.4.1.9.2.1.95 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory +/- Percentage that will shut the router down, (e.g. 10%) typically -5 volt | |||||||||||||||||
| SenvTestPt1last | 1.3.6.1.4.1.9.2.1.96 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value of TestPt1 when last shutdown occurred. | |||||||||||||||||
| SenvTestPt2last | 1.3.6.1.4.1.9.2.1.97 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value of TestPt2 when last shutdown occurred. | |||||||||||||||||
| SenvTestPt3last | 1.3.6.1.4.1.9.2.1.98 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value of TestPt3 when last shutdown occurred. | |||||||||||||||||
| SenvTestPt4last | 1.3.6.1.4.1.9.2.1.99 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value of TestPt4 when last shutdown occurred. | |||||||||||||||||
| SenvTestPt5last | 1.3.6.1.4.1.9.2.1.100 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value of TestPt5 when last shutdown occurred. | |||||||||||||||||
| SenvTestPt6last | 1.3.6.1.4.1.9.2.1.101 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Value of TestPt6 when last shutdown occurred. | |||||||||||||||||
| SenvTestPt1warn | 1.3.6.1.4.1.9.2.1.102 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is this test point at a warning level?
| |||||||||||||||||
| SenvTestPt2warn | 1.3.6.1.4.1.9.2.1.103 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is this test point at a warning level?
| |||||||||||||||||
| SenvTestPt3warn | 1.3.6.1.4.1.9.2.1.104 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is this test point at a warning level?
| |||||||||||||||||
| SenvTestPt4warn | 1.3.6.1.4.1.9.2.1.105 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is this test point at a warning level?
| |||||||||||||||||
| SenvTestPt5warn | 1.3.6.1.4.1.9.2.1.106 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is this test point at a warning level?
| |||||||||||||||||
| SenvTestPt6warn | 1.3.6.1.4.1.9.2.1.107 | INTEGER | RO | mandatory | |||||||||||||
scalar · INTEGER · read-only · mandatory Is this test point at a warning level?
| |||||||||||||||||
| SenvFirmVersion | 1.3.6.1.4.1.9.2.1.108 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Description of Environmental Card firmware | |||||||||||||||||
| SenvTechnicianID | 1.3.6.1.4.1.9.2.1.109 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Technician ID | |||||||||||||||||
| SenvType | 1.3.6.1.4.1.9.2.1.110 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The type of environmental card | |||||||||||||||||
| SenvBurnDate | 1.3.6.1.4.1.9.2.1.111 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory The calibration / burn in date | |||||||||||||||||
| SenvSerialNumber | 1.3.6.1.4.1.9.2.1.112 | DisplayString | RO | mandatory | |||||||||||||
scalar · DisplayString · read-only · mandatory Serial Number of environmental monitor card | |||||||||||||||||