CISCOSB-UDLD-MIB
ciscoSystemsThis private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol).
snmptranslate -m CISCOSB-UDLD-MIB -Tpsnmpwalk -v2c -c <community> -m CISCOSB-UDLD-MIB <host> 1.3.6.1.4.1.9.6.1.101.218Imports
| CISCOSB-MIB | rndNotifications, switch001 |
|---|---|
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlUdld | 1.3.6.1.4.1.9.6.1.101.218 | |||
identity This private MIB module for UDLD (Cisco Systems UniDirectional Link Detection Protocol). | ||||
| TrlUdldPortTable | 1.3.6.1.4.1.9.6.1.101.218.1 | NA | ||
table · not-accessible · current The table holds information for Udld Ethernet ports. | ||||
| RrlUdldPortEntry | 1.3.6.1.4.1.9.6.1.101.218.1.1 | NA | ||
| CrlUdldPortIfIndex | 1.3.6.1.4.1.9.6.1.101.218.1.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface Index. This variable is the key for udld port table. uniquely identifies the udld port information. | ||||
| CrlUdldPortAdminMode | 1.3.6.1.4.1.9.6.1.101.218.1.1.2 | UdldPortMode | RW | |
column · UdldPortMode · read-write · current This variable identifies port UDLD admin configured mode (normal, aggressive, disable). | ||||
| CrlUdldPortOperMode | 1.3.6.1.4.1.9.6.1.101.218.1.1.3 | UdldPortMode | RO | |
column · UdldPortMode · read-only · current This variable identifies port UDLD operational mode (normal, aggressive, disable). for fiber ports it is combination of global mode and port mode | ||||
| CrlUdldPortDefaultConfiguration | 1.3.6.1.4.1.9.6.1.101.218.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current This variable indicates whether tne user configure the udld port. to present (default) or not in port configuration. | ||||
| CrlUdldBidirectionalState | 1.3.6.1.4.1.9.6.1.101.218.1.1.5 | UdldPortBidirectionalState | RO | |
column · UdldPortBidirectionalState · read-only · current This variable identifies the port UDLD status (shutdown, idle, detection, undetermined, bidirectional). | ||||
| CrlUdldNumberOfDetectedNeighbors | 1.3.6.1.4.1.9.6.1.101.218.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Number Of Detected Neighbors for this port. | ||||
| TrlUdldNeighborTable | 1.3.6.1.4.1.9.6.1.101.218.2 | NA | ||
table · not-accessible · current The table holds information for Udld Neighbor of ethernet ports. | ||||
| RrlUdldNeighborEntry | 1.3.6.1.4.1.9.6.1.101.218.2.1 | NA | ||
row · not-accessible · current Entry in the rlUdldNeighborTable. | ||||
| CrlUdldNeighborPortIfIndex | 1.3.6.1.4.1.9.6.1.101.218.2.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current Interface Index. This variable is the key for udld port Neighbor table. uniquely identifies the udld port index. | ||||
| CrlUdldNeighborDeviceID | 1.3.6.1.4.1.9.6.1.101.218.2.1.2 | UdldString | NA | |
column · UdldString · not-accessible · current The Neighbor Device-ID TLV should contain the switch base MAC address in ACSII format. | ||||
| CrlUdldNeighborPortID | 1.3.6.1.4.1.9.6.1.101.218.2.1.3 | UdldString | NA | |
column · UdldString · not-accessible · current The Port-ID TLV should contain the port ACSII name as it is printed in show CLI commands. | ||||
| CrlUdldNeighborDeviceMACAddress | 1.3.6.1.4.1.9.6.1.101.218.2.1.4 | MacAddress | NA | |
column · MacAddress · not-accessible · current The Neighbor mac address | ||||
| CrlUdldNeighborDeviceName | 1.3.6.1.4.1.9.6.1.101.218.2.1.5 | UdldString | RO | |
column · UdldString · read-only · current The Neighbor NeighborDevice Name TLV should contain sysName in ACSII. | ||||
| CrlUdldNeighborMessageTime | 1.3.6.1.4.1.9.6.1.101.218.2.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current The Neighbor Message Time is from Message Interval TLV. This time interval value used by a neighbor to send UDLD probes after the linkup or detection phases. Its time unit is 1 second. | ||||
| CrlUdldNeighborLeftLifeTime | 1.3.6.1.4.1.9.6.1.101.218.2.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The remaining holdtime for Neighbor entry in cache in seconds. | ||||
| CrlUdldNeighborCurrentState | 1.3.6.1.4.1.9.6.1.101.218.2.1.8 | UdldNeighborCurrentState | RO | |
column · UdldNeighborCurrentState · read-only · current This variable identifies the Neighbor port UDLD current status (Disabled, Enabled, Undefined, Bidirectional). | ||||
| SrlUdldGlobalUDLDMode | 1.3.6.1.4.1.9.6.1.101.218.3 | UdldGlobalMode | RW | |
scalar · UdldGlobalMode · read-write · current Define Global UDLD Mode (normal, aggressive, disable) | ||||
| SrlUdldGlobalMessageTime | 1.3.6.1.4.1.9.6.1.101.218.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Define global value of the interval between two sent probe messages, use the udld message time command in Global Configuration mode. | ||||
Textual conventions
UdldGlobalModeINTEGERaggressive(2)disabled(3)normal(1)Global (fiber) Port UDLD curent status (normal, aggressive, disabled).
UdldNeighborCurrentStateINTEGERbidirectional(4)disabled(1)enabled(2)undefined(3)Port UDLD Neighbor current status (Disabled, Enabled, Undefined, Bidirectional).
UdldPortBidirectionalStateINTEGERbidirectional(5)detection(3)idle(2)shutdown(1)undetermined(4)Port UDLD current status (shutdown, idle, detection, undetermined, bidirectional).
UdldPortModeINTEGERaggressive(2)default(4)disabled(3)normal(1)Port UDLD curent status (normal, aggressive, disabled, default).
UdldStringSnmpAdminStringThe Device-ID TLV should contain the switch base MAC address in ACSII format.