CISCOSB-Tuning
ciscoSystemsThe private MIB module definition for switch001 device tuning MIB.
snmptranslate -m CISCOSB-Tuning -Tpsnmpwalk -v2c -c <community> -m CISCOSB-Tuning <host> 1.3.6.1.4.1.9.6.1.101.29Imports
| CISCOSB-BRIDGEMIBOBJECTS-MIB | VlanList1, VlanList2, VlanList3, VlanList4 |
|---|---|
| CISCOSB-MIB | switch001 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrsTunning | 1.3.6.1.4.1.9.6.1.101.29 | |||
identity The private MIB module definition for switch001 device tuning MIB. | ||||
| SrsHighPriority | 1.3.6.1.4.1.9.6.1.101.29.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode. | ||||
| SrsLowPriority | 1.3.6.1.4.1.9.6.1.101.29.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode. | ||||
| SrsDbgLevel | 1.3.6.1.4.1.9.6.1.101.29.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable indicates the debug level the Router Server works. the range of this variable is 1..100 | ||||
| TrsDiagnosticsTable | 1.3.6.1.4.1.9.6.1.101.29.4 | NA | ||
table · not-accessible · current The diagnostics table of the agent | ||||
| RrsDiagnosticsEntry | 1.3.6.1.4.1.9.6.1.101.29.4.1 | NA | ||
| CrsDiagnosticsRequestId | 1.3.6.1.4.1.9.6.1.101.29.4.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last rejected SNMP request sent by the querying NMS is returned. | ||||
| CrsDiagnosticsCode | 1.3.6.1.4.1.9.6.1.101.29.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diagnostic text is unavailable. | ||||
| CrsDiagnosticsLocation | 1.3.6.1.4.1.9.6.1.101.29.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes only and will be returned in GET requests only if rsDbgLevel >= 99. | ||||
| CrsDiagnosticsText | 1.3.6.1.4.1.9.6.1.101.29.4.1.4 | DisplayString (SIZE (1..160)) | RO | |
column · DisplayString (SIZE (1..160)) · read-only · current The diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry. | ||||
| SrsConfirmMessagTab | 1.3.6.1.4.1.9.6.1.101.29.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current This variable enables the operator to confirm all the message in the event Message Table. | ||||
| TeventMessageTable | 1.3.6.1.4.1.9.6.1.101.29.6 | NA | ||
table · not-accessible · current The Event Message table of the agent | ||||
| ReventMessageEntry | 1.3.6.1.4.1.9.6.1.101.29.6.1 | NA | ||
| CeventNum | 1.3.6.1.4.1.9.6.1.101.29.6.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current The event number,the index of this table. | ||||
| CeventDesc | 1.3.6.1.4.1.9.6.1.101.29.6.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The event discription, this text will include time and severity. | ||||
| NreaTunning | 1.3.6.1.4.1.9.6.1.101.29.7 | |||
| SreaIpForwardEnable | 1.3.6.1.4.1.9.6.1.101.29.7.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Platform will perform fast IP forwarding if only if this variable's value is enable.
| ||||
| SreaIpxForwardEnable | 1.3.6.1.4.1.9.6.1.101.29.7.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Platform will perform fast IPX forwarding if only if this variable's value is enable.
| ||||
| NrsMaxEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8 | |||
| NrsMaxBridgeForwardingEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.1 | |||
| SrsMaxBrgFrwEntries | 1.3.6.1.4.1.9.6.1.101.29.8.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in bridge forwarding table. | ||||
| SrsMaxBrgFrwEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in bridge forwarding table. | ||||
| NrsMaxIpForwardingEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.2 | |||
| SrsMaxIpFrwEntries | 1.3.6.1.4.1.9.6.1.101.29.8.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in Ip forwarding table. | ||||
| SrsMaxIpFrwEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in Ip forwarding table. | ||||
| NrsMaxArpEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.3 | |||
| SrsMaxArpEntries | 1.3.6.1.4.1.9.6.1.101.29.8.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in Arp forwarding table. | ||||
| SrsMaxArpEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in Arp forwarding table. | ||||
| NrsMaxIpxForwardingEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.4 | |||
| SrsMaxIpxFrwEntries | 1.3.6.1.4.1.9.6.1.101.29.8.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in Ipx forwarding table. | ||||
| SrsMaxIpxFrwEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in Ipx forwarding table. | ||||
| NrsMaxIpxSapEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.5 | |||
| SrsMaxIpxSapEntries | 1.3.6.1.4.1.9.6.1.101.29.8.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in IpxSap table. | ||||
| SrsMaxIpxSapEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in IpxSap table. | ||||
| NrsMaxDspClntEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.6 | |||
| SrsMaxDspClntEntries | 1.3.6.1.4.1.9.6.1.101.29.8.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in rsSdClientsTable. | ||||
| SrsMaxDspClntEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in rsSdClientsTable. | ||||
| NrsMaxIpFftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.9 | |||
| SrsMaxIpSFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IP SFFT Table. | ||||
| SrsMaxIpSFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one IP SFFT Table. | ||||
| SrsMaxIpNFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IP NFFT Table. | ||||
| SrsMaxIpNFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one IP NFFT Table. | ||||
| SrsMaxIpSFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of the SYSTEM IP SFFT Table. | ||||
| SrsMaxIpSFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of the SYSTEM IP SFFT Table. | ||||
| SrsMaxIpNFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of the SYSTEM IP NFFT Table. | ||||
| SrsMaxIpNFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of the SYSTEM IP NFFT Table. | ||||
| SrsMaxIpNextHopEntries | 1.3.6.1.4.1.9.6.1.101.29.8.9.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IP NextHop Table. | ||||
| SrsMaxIpNextHopEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.9.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one NextHop Table. | ||||
| NrsMaxIpxFftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.10 | |||
| SrsMaxIpxSFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IPX SFFT Table. | ||||
| SrsMaxIpxSFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one IPX SFFT Table. | ||||
| SrsMaxIpxNFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IPX NFFT Table. | ||||
| SrsMaxIpxNFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one IPX NFFT Table. | ||||
| SrsMaxIpxSFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of the SYSTEM IPX SFFT Table. | ||||
| SrsMaxIpxSFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of the SYSTEM IPX SFFT Table. | ||||
| SrsMaxIpxNFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.10.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of the SYSTEM IPX NFFT Table. | ||||
| SrsMaxIpxNFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.10.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of the SYSTEM IPX NFFT Table. | ||||
| NrsMaxDhcpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.11 | |||
| SrsMaxDhcpConns | 1.3.6.1.4.1.9.6.1.101.29.8.11.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal number of DHCP connections. | ||||
| SrsMaxDhcpConnsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.11.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal number of DHCP connections. | ||||
| NrsMaxIpmTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12 | |||
| NrsMaxIpmFftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.1 | |||
| SrsMaxIpmFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.1.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal number of the IPM FFT Tables. | ||||
| SrsMaxIpmFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal number of the IPM FFT Tables. | ||||
| SrsIpmFftAging | 1.3.6.1.4.1.9.6.1.101.29.8.12.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current The aging timeout of the IPM FFT Tables. | ||||
| NrsMaxIgmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.2 | |||
| SrsMaxIgmpInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the IGMP Neighbor Table. | ||||
| SrsMaxIgmpInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the IGMP Neighbor Table. | ||||
| SrsMaxIgmpCacheEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the IGMP Cache Table. | ||||
| SrsMaxIgmpCacheEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the IGMP Cache Table. | ||||
| NrsMaxPimTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.3 | |||
| SrsMaxPimNeighborEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the PIM Neighbor Table. | ||||
| SrsMaxPimNeighborEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the PIM Neighbor Table. | ||||
| SrsMaxPimRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the PIM Route Table. | ||||
| SrsMaxPimRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the PIM Route Table. | ||||
| SrsMaxPimRouteNextHopEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the PIM Route Next Hop Table. | ||||
| SrsMaxPimRouteNextHopEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the PIM Route Next Hop Table. | ||||
| SrsMaxPimInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of interfaces in the PIM Interface Table. | ||||
| SrsMaxPimInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.3.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Maximal number of interfaces in the PIM Interface Table. | ||||
| NrsMaxDvmrpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.4 | |||
| SrsMaxDvmrpNeighborEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the Dvmrp Neighbor Table. | ||||
| SrsMaxDvmrpNeighborEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the Dvmrp Neighbor Table. | ||||
| SrsMaxDvmrpRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the Dvmrp Route Table. | ||||
| SrsMaxDvmrpRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the Dvmrp Route Table. | ||||
| SrsMaxDvmrpMRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the Dvmrp Multicast Route Table. | ||||
| SrsMaxDvmrpMRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the Dvmrp Multicast Route Table. | ||||
| SrsMaxDvmrpInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Maximal number of interfaces in the Dvmrp Interface Table. | ||||
| SrsMaxDvmrpInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.4.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of interfaces in the Dvmrp Interface Table. | ||||
| NrsMaxPigmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.5 | |||
| SrsMaxPigmpRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.5.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the IGMP Proxy Routing Table. | ||||
| SrsMaxPigmpRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.5.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the IGMP Proxy Routing Table. | ||||
| NrsMaxPimSmTuning | 1.3.6.1.4.1.9.6.1.101.29.8.12.6 | |||
| SrsMaxPimSmNeighborEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the PIM Neighbor Table. | ||||
| SrsMaxPimSmNeighborEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the PIM Neighbor Table. | ||||
| SrsMaxPimSmRouteEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the PIM Route Table. | ||||
| SrsMaxPimSmRouteEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the PIM Route Table. | ||||
| SrsMaxPimSmInterfaceEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the PIM Interface Table. | ||||
| SrsMaxPimSmInterfaceEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the PIM Interface Table. | ||||
| SrsMaxPimSmRPSetEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the RPSet Table. | ||||
| SrsMaxPimSmRPSetEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the RPSet Table. | ||||
| SrsMaxPimSmCRPEntries | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the RPSet Table. | ||||
| SrsMaxPimSmCRPEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the RPSet Table. | ||||
| SrsMaxNumberRpAddresesInGroupRange | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of rp addresses per group range in the RPSet Table. | ||||
| SrsMaxNumberRpAddresesInGroupRangeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.12.6.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of rp addresses per group range in the RPSet Table. | ||||
| NrsMaxRmonTuning | 1.3.6.1.4.1.9.6.1.101.29.8.13 | |||
| SrsMaxRmonLogEntries | 1.3.6.1.4.1.9.6.1.101.29.8.13.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in RMON Log table. | ||||
| SrsMaxRmonLogEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.13.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in RMON Log table. | ||||
| SrsMaxRmonEtherHistoryEntries | 1.3.6.1.4.1.9.6.1.101.29.8.13.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in RMON EtherHistory table. | ||||
| SrsMaxRmonEtherHistoryEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.13.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in RMON EtherHistory table. | ||||
| NrsMaxIgmpSnoopTuning | 1.3.6.1.4.1.9.6.1.101.29.8.14 | |||
| SrsMaxIgmpSnoopGroupEntries | 1.3.6.1.4.1.9.6.1.101.29.8.14.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of entries in the IGMP Snooping group table. | ||||
| SrsMaxIgmpSnoopGroupEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the IGMP Snooping group table. | ||||
| NrsMaxVlansTuning | 1.3.6.1.4.1.9.6.1.101.29.8.15 | |||
| SrsMaxVlansEntries | 1.3.6.1.4.1.9.6.1.101.29.8.15.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of entries in the VLANs table. | ||||
| SrsMaxVlansEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.15.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the VLANs table. | ||||
| SrsMaxVlanMapping | 1.3.6.1.4.1.9.6.1.101.29.8.15.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of VLAN mapping entries in the TCAM. | ||||
| SrsMaxVlanMappingAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.15.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of VLAN mapping entries in the TCAM. | ||||
| NrsMaxPolicyTuning | 1.3.6.1.4.1.9.6.1.101.29.8.16 | |||
| SrsMaxPolicyMaxRulesEntries | 1.3.6.1.4.1.9.6.1.101.29.8.16.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the Policy Route Table. | ||||
| SrsMaxPolicyMaxRulesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.16.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the Policy Route Table. | ||||
| SrsMaxPolicySimpleMibMaxRulesEntries | 1.3.6.1.4.1.9.6.1.101.29.8.16.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the Policy SimpleMib Table. | ||||
| SrsMaxPolicySimpleMibMaxRulesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.16.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the Policy SimpleMib Table. | ||||
| SrsMaxPolicySimpleMibMaxProfilesEntries | 1.3.6.1.4.1.9.6.1.101.29.8.16.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of entries in the profile Policy SimpleMib Table. | ||||
| SrsMaxPolicySimpleMibMaxProfilesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.16.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of entries in the profile Policy SimpleMib Table. | ||||
| NrsMaxGvrpVlansTuning | 1.3.6.1.4.1.9.6.1.101.29.8.17 | |||
| SrsMaxGvrpVlans | 1.3.6.1.4.1.9.6.1.101.29.8.17.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of VLANs that can participant in Gvrp. | ||||
| SrsMaxGvrpVlansAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.17.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximal number of VLANs that can participant in Gvrp. | ||||
| NrsMaxTraceRouteTuning | 1.3.6.1.4.1.9.6.1.101.29.8.18 | |||
| SrsMaxTraceRouteControlEntries | 1.3.6.1.4.1.9.6.1.101.29.8.18.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of trace route control entries. | ||||
| SrsMaxTraceRouteControlEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.18.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximum number of trace route control entries. | ||||
| SrsMaxTraceRouteProbeHistoryEntries | 1.3.6.1.4.1.9.6.1.101.29.8.18.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of trace route probe history entries. | ||||
| SrsMaxTraceRouteProbeHistoryEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.18.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximum number of trace route probe history entries. | ||||
| NrsMaxSnmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.19 | |||
| SrsMaxSnmpCommunityEntries | 1.3.6.1.4.1.9.6.1.101.29.8.19.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of snmpCommunityTable entries. | ||||
| SrsMaxSnmpCommunityEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.19.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximum number of snmpCommunityTable entries. | ||||
| NrsMaxSocketTuning | 1.3.6.1.4.1.9.6.1.101.29.8.20 | |||
| SrsMaxNumberOfSockets | 1.3.6.1.4.1.9.6.1.101.29.8.20.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of sockets. | ||||
| SrsMaxNumberOfSocketsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.20.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of sockets. | ||||
| SrsMaxSizeOfSocketDataPool | 1.3.6.1.4.1.9.6.1.101.29.8.20.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal size of socket data pool. | ||||
| SrsMaxSizeOfSocketDataPoolAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.20.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal size of socket data pool. | ||||
| NrsMaxIpRouteTuning | 1.3.6.1.4.1.9.6.1.101.29.8.21 | |||
| SrsMaxIpPrefixes | 1.3.6.1.4.1.9.6.1.101.29.8.21.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of IP prefixes that router supports. | ||||
| SrsMaxIpPrefixesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.21.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of IP prefixes that router supports. | ||||
| NrsMaxIpNextHopSetTuning | 1.3.6.1.4.1.9.6.1.101.29.8.22 | |||
| SrsMaxIpNextHopSetEntries | 1.3.6.1.4.1.9.6.1.101.29.8.22.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of NextHops that may be used for forwarding for a destinaton. | ||||
| SrsMaxIpNextHopSetEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.22.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of NextHops that may be used for forwarding for a destinaton. | ||||
| NrsMaxIpEcmpTuning | 1.3.6.1.4.1.9.6.1.101.29.8.23 | |||
| SrsMaxIpEcmpEntrySize | 1.3.6.1.4.1.9.6.1.101.29.8.23.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximum number of ECMP Sets for forwarding. | ||||
| SrsMaxIpEcmpEntrySizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.23.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximum number of ECMP Sets for forwarding. | ||||
| NrsMaxdot1xEapRequestTuning | 1.3.6.1.4.1.9.6.1.101.29.8.24 | |||
| SrsMaxdot1xEapRequestEntries | 1.3.6.1.4.1.9.6.1.101.29.8.24.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of eap request packets entries that can be retransmitted. | ||||
| SrsMaxdot1xEapRequestEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.24.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future maximum number of eap request packets entries that can be retransmitted. | ||||
| NrsMaxIpInterfaceTuning | 1.3.6.1.4.1.9.6.1.101.29.8.25 | |||
| SrsMaxIpInterfaces | 1.3.6.1.4.1.9.6.1.101.29.8.25.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of IP interfaces. Applies to inBand IP interfaces. | ||||
| SrsMaxIpInterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.25.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of IP interfaces. Applies to inBand IP interfaces. | ||||
| NrsMaxIpv6FftEntriesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.26 | |||
| SrsMaxIpv6SFftEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IPV6 SFFT Table. | ||||
| SrsMaxIpv6SFftEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one IPV6 SFFT Table. | ||||
| SrsMaxIpv6SFftSysEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of the SYSTEM IPV6 SFFT Table. | ||||
| SrsMaxIpv6SFftSysEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of the SYSTEM IPV6 SFFT Table. | ||||
| SrsMaxIpv6Prefixes | 1.3.6.1.4.1.9.6.1.101.29.8.26.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of IPV6 prefixes that router supports. | ||||
| SrsMaxIpv6PrefixesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of IPV6 prefixes that router supports. | ||||
| SrsMaxIpv6NextHopEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal size of one IPV6 NextHop Table. | ||||
| SrsMaxIpv6NextHopEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal size of one NextHop Table. | ||||
| SrsMaxIpv6NextHopSetEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of NextHops that may be used for forwarding for a destinaton. | ||||
| SrsMaxIpv6NextHopSetEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of NextHops that may be used for forwarding for a destinaton. | ||||
| SrsMaxIpv6GlobalAddresses | 1.3.6.1.4.1.9.6.1.101.29.8.26.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal global number of IPV6 addresses. | ||||
| SrsMaxIpv6GlobalAddressesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal global number of IPV6 addresses. | ||||
| SrsMaxArpTunnelStartEntries | 1.3.6.1.4.1.9.6.1.101.29.8.26.13 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote station | ||||
| SrsMaxArpTunnelStartEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.26.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal global number of tunnel start and ARP entries. Tunnel start refer to tunnel remote station | ||||
| NrsMaxIpv6InterfaceTuning | 1.3.6.1.4.1.9.6.1.101.29.8.27 | |||
| SrsMaxIpv6Interfaces | 1.3.6.1.4.1.9.6.1.101.29.8.27.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces. | ||||
| SrsMaxIpv6InterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.27.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of IPV6 interfaces. Applies to inBand IPV6 interfaces. | ||||
| SrsMaxIpv6AddrPerInterfaces | 1.3.6.1.4.1.9.6.1.101.29.8.27.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Maximal number of IPV6 Addresses per interfaces. | ||||
| SrsMaxIpv6AddrPerInterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.27.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current FutureMaximal number of IPV6 Addresses per interfaces. | ||||
| NrsMaxIpRoutesTuning | 1.3.6.1.4.1.9.6.1.101.29.8.28 | |||
| SrsMaxIpv4Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpv4RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of IPv4 routers supported by the IPv4 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpv6Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpv6RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of IPv6 routers supported by the IPv6 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpmv4Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table. | ||||
| SrsMaxIpmv4RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of IPv4 routers ((*,G) and (S,G)) supported by the IPv4 Multicast Hardware Forwarding Table. | ||||
| SrsMaxIpmv6Routes | 1.3.6.1.4.1.9.6.1.101.29.8.28.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table. | ||||
| SrsMaxIpmv6RoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of IPv6 routers ((*,G) and (S,G)) supported by the IPv6 Multicast Hardware Forwarding Table. | ||||
| SrsMaxIpv4PbrRoutes | 1.3.6.1.4.1.9.6.1.101.29.8.28.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPv4 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpv4PbrRoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of IPv4 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpv6PbrRoutes | 1.3.6.1.4.1.9.6.1.101.29.8.28.11 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of IPv6 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. | ||||
| SrsMaxIpv6PbrRoutesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.8.28.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Future Maximal number of IPv6 policy routes supported by the IPv4 Unicast Hardware Forwarding Table. | ||||
| NrsTcpTuning | 1.3.6.1.4.1.9.6.1.101.29.11 | |||
| SrsTcpMemoryPoolSizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.11.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packets | ||||
| SrsTcpMemoryPoolSize | 1.3.6.1.4.1.9.6.1.101.29.11.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The size of the memory pool that the tcp uses currently. The memory pool is used for sending packets | ||||
| NrsRadiusTuning | 1.3.6.1.4.1.9.6.1.101.29.12 | |||
| SrsRadiusMemoryPoolSizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.12.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The size of the memory pool that radius will allocate after reset. The memory pool is used for attributes | ||||
| SrsRadiusMemoryPoolSize | 1.3.6.1.4.1.9.6.1.101.29.12.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The size of the memory pool that radius uses currently. The memory pool is used for attributes | ||||
| NrlSyslogTuning | 1.3.6.1.4.1.9.6.1.101.29.13 | |||
| SrlSyslogFilePercentToDeleteWhenCompacting | 1.3.6.1.4.1.9.6.1.101.29.13.3 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value. | ||||
| SrlSyslogFilePercentToDeleteWhenCompactingAfterReset | 1.3.6.1.4.1.9.6.1.101.29.13.4 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset. | ||||
| SrlSyslogCacheSize | 1.3.6.1.4.1.9.6.1.101.29.13.5 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current The size of memory cache of last errors reported. This cache is cyclic. This is the current value. | ||||
| SrlSyslogCacheSizeAfterReset | 1.3.6.1.4.1.9.6.1.101.29.13.6 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The size of memory cache of last errors reported. This cache is cyclic. This is the value after reset. | ||||
| NrlMngInfTuning | 1.3.6.1.4.1.9.6.1.101.29.14 | |||
| SrlMaxNumberOfAccessRules | 1.3.6.1.4.1.9.6.1.101.29.14.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The Maximum number of rules per Access List that can be defined | ||||
| SrlMaxNumberOfAccessRulesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The Maximum number of rules per Access List for after reset tuning | ||||
| SrsDiagnosticTextSource | 1.3.6.1.4.1.9.6.1.101.29.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current The source from which SNMP diagnostics message texts should be taken.
| ||||
| NrsMultiSession | 1.3.6.1.4.1.9.6.1.101.29.17 | |||
| SrsMultiSessionMaxSessionsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.17.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The maximum number of terminal sessions (serial, telnet and ssh) available after reset. | ||||
| SrsMultiSessionMaxSessions | 1.3.6.1.4.1.9.6.1.101.29.17.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current The maximum number of terminal sessions (serial, telnet and ssh) available. | ||||
| NrlDnsClTuning | 1.3.6.1.4.1.9.6.1.101.29.18 | |||
| SrlMaxDnsClCacheRREntries | 1.3.6.1.4.1.9.6.1.101.29.18.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal number of DNS client cache entries. | ||||
| SrlMaxDnsClCacheRREntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.18.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal number of DNS client cache entries. | ||||
| SrlMaxDnsClNCacheErrEntries | 1.3.6.1.4.1.9.6.1.101.29.18.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal number of DNS client negative cache entries. | ||||
| SrlMaxDnsClNCacheErrEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.18.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal number of DNS client negative cache entries. | ||||
| SrlMaxDnsClNamesEntries | 1.3.6.1.4.1.9.6.1.101.29.18.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximal number of DNS client static names entries. | ||||
| SrlMaxDnsClNamesEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.18.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximal number of DNS client static names entries. | ||||
| TrlTuningParamsTable | 1.3.6.1.4.1.9.6.1.101.29.19 | NA | ||
table · not-accessible · current table to show tuning : limits curent and after reset values. | ||||
| RrlTuningParamsEntry | 1.3.6.1.4.1.9.6.1.101.29.19.1 | NA | ||
row · not-accessible · current Defines the contents of each line in the rlTuningParamsTable table.
| ||||
| CrlTuningParamsName | 1.3.6.1.4.1.9.6.1.101.29.19.1.1 | DisplayString (SIZE (1..80)) | RO | |
column · DisplayString (SIZE (1..80)) · read-only · current Index to the rlTuningParamsTable. name of current value Mib for this entry. | ||||
| CrlTuningParamsCurrentValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This variable current value used in this run by the system. | ||||
| CrlTuningParamsAfterResetValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This variable value that will be used in next run by the system. i.e. the value will be effective after next reboot | ||||
| CrlTuningParamsDefaultValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current This variable value that is used by the system as default. | ||||
| CrlTuningParamsMinimalValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current This variable value indicate minimum value. this is the lower limit for editing the value after reset. | ||||
| CrlTuningParamsMaximalValue | 1.3.6.1.4.1.9.6.1.101.29.19.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current This variable value indicate maximum value. This is the upper limit for editing the value after reset. | ||||
| TrlHostParamTable | 1.3.6.1.4.1.9.6.1.101.29.20 | NA | ||
table · not-accessible · current table to show tuning : limits curent and after reset values. | ||||
| RrlHostParamEntry | 1.3.6.1.4.1.9.6.1.101.29.20.1 | NA | ||
row · not-accessible · current Defines the contents of each line in the rlHostParamTable table.
| ||||
| CrlHostParamName | 1.3.6.1.4.1.9.6.1.101.29.20.1.1 | DisplayString (SIZE (1..80)) | RO | |
column · DisplayString (SIZE (1..80)) · read-only · current Index to the rlHostParamTable. name of current value Mib for this entry. | ||||
| CrlHostParamValue | 1.3.6.1.4.1.9.6.1.101.29.20.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current This variable indicates the current INTEGER value used in this run by the system. Applicable only if rlHostParamType has 'int' value | ||||
| CrlHostParamType | 1.3.6.1.4.1.9.6.1.101.29.20.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This variable indicates the type of this host parameter.
int - the value will be appear in the rlHostParamValue instance of this conceptual row.
uint - the value will be appear in the rlHostParamUINT instance of this conceptual row.
octetString - the value will be appear in the rlHostParamOctetString instance of this conceptual row.
ipV4address - the value will be appear in the rlHostParamIpAddress instance of this conceptual row.
ipV6address - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
to be interpreted as indicated in INET-ADDRESS-MIB.
ipV6zAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
to be interpreted as indicated in INET-ADDRESS-MIB.
inetAddress - the inet address type will be appear in the rlHostParamUINT instance and
inet address itself will be appear in the rlHostParamOctetString instance of
this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB.
macAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
to be interpreted as in SNMPv2-TC.
objectIdentifier - the value the value will be appear in the rlHostParamObjectId instance of this conceptual
row.
displayString - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
to be interpreted as in SNMPv2-TC.
truthValue - the value will be appear in the rlHostParamUINT instance of this conceptual row,
to be interpreted as in SNMPv2-TC.
portlist - the value will be appear in the rlHostParamOctetString instance of this conceptual row,
to be interpreted as in Q-BRIDGE-MIB.
| ||||
| CrlHostParamUINT | 1.3.6.1.4.1.9.6.1.101.29.20.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This variable indicates the current UINT value used in this run by the system. Applicable only if rlHostParamType has 'uint', inetAddress or truthValue value | ||||
| CrlHostParamOctetString | 1.3.6.1.4.1.9.6.1.101.29.20.1.5 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current This variable indicates the current OCTET STRING value used in this run by the system. Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAddress, inetAddress, macAddress or displayString value | ||||
| CrlHostParamIpAddress | 1.3.6.1.4.1.9.6.1.101.29.20.1.6 | IpAddress | RO | |
column · IpAddress · read-only · current This variable indicates the current IpAddress value used in this run by the system. Applicable only if rlHostParamType has ipV4address value | ||||
| CrlHostParamObjectId | 1.3.6.1.4.1.9.6.1.101.29.20.1.7 | OBJECT IDENTIFIER | RO | |
column · OBJECT IDENTIFIER · read-only · current This variable indicates the current OBJECT IDENTIFIER value used in this run by the system. Applicable only if rlHostParamType has objectIdentifier value | ||||
| NrlOspfTuning | 1.3.6.1.4.1.9.6.1.101.29.21 | |||
| SrlMaxOspfInterfaces | 1.3.6.1.4.1.9.6.1.101.29.21.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximum number of ospf interfaces. | ||||
| SrlMaxOspfInterfacesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximum number of ospf interfaces. | ||||
| SrlMaxOspfAreas | 1.3.6.1.4.1.9.6.1.101.29.21.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximum number of ospf areas. | ||||
| SrlMaxOspfAreasAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximum number of ospf areas. | ||||
| SrlMaxOspfNeighbors | 1.3.6.1.4.1.9.6.1.101.29.21.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximum number of ospf neighbors. | ||||
| SrlMaxOspfNeighborsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximum number of ospf neighbors. | ||||
| SrlMaxOspfAbrPerArea | 1.3.6.1.4.1.9.6.1.101.29.21.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximum number of ABR in ospf area. | ||||
| SrlMaxOspfAbrPerAreaAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximum number of ABR in ospf area. | ||||
| SrlMaxOspfNetsInAs | 1.3.6.1.4.1.9.6.1.101.29.21.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximum number of networks in AS. | ||||
| SrlMaxOspfNetsInAsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.21.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximum number of networks in AS. | ||||
| NrlVlanTuning | 1.3.6.1.4.1.9.6.1.101.29.22 | |||
| SrlVlanDefaultVID | 1.3.6.1.4.1.9.6.1.101.29.22.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The default vlan vid. | ||||
| SrlVlanDefaultVIDAfterReset | 1.3.6.1.4.1.9.6.1.101.29.22.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The default vlan vid after rest | ||||
| TrlVlanUsageForbiddenListTable | 1.3.6.1.4.1.9.6.1.101.29.22.3 | NA | ||
table · not-accessible · current The list of vlan IDs that forbidden for internal usage. | ||||
| RrlVlanUsageForbiddenListEntry | 1.3.6.1.4.1.9.6.1.101.29.22.3.1 | NA | ||
row · not-accessible · current Statical created by local or network management VLAN list | ||||
| CrlVlanUsageForbiddenListIndex | 1.3.6.1.4.1.9.6.1.101.29.22.3.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current An index is entrie's sequence. | ||||
| CrlVlanUsageForbiddenList1to1024 | 1.3.6.1.4.1.9.6.1.101.29.22.3.1.2 | VlanList1 | RO | |
column · VlanList1 · read-only · current A list of staticaly created vlans from 1 to 1024. | ||||
| CrlVlanUsageForbiddenList1025to2048 | 1.3.6.1.4.1.9.6.1.101.29.22.3.1.3 | VlanList2 | RO | |
column · VlanList2 · read-only · current A list of according to the type field created vlans from 1025 to 2048. | ||||
| CrlVlanUsageForbiddenList2049to3072 | 1.3.6.1.4.1.9.6.1.101.29.22.3.1.4 | VlanList3 | RO | |
column · VlanList3 · read-only · current A list of according to the type field created vlans from 2049 to 3072. | ||||
| CrlVlanUsageForbiddenList3073to4094 | 1.3.6.1.4.1.9.6.1.101.29.22.3.1.5 | VlanList4 | RO | |
column · VlanList4 · read-only · current A list of according to the type field created vlans from 3073 to 4094. | ||||
| TrlVlanUsageForbiddenListAfterResetTable | 1.3.6.1.4.1.9.6.1.101.29.22.4 | NA | ||
table · not-accessible · current The list of vlan IDs that forbidden for internal usage. The configuration applied after the system reset. | ||||
| RrlVlanUsageForbiddenListAfterResetEntry | 1.3.6.1.4.1.9.6.1.101.29.22.4.1 | NA | ||
row · not-accessible · current Staticly created by local or network management vlan list | ||||
| CrlVlanUsageForbiddenListAfterResetIndex | 1.3.6.1.4.1.9.6.1.101.29.22.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current An index is entrie's sequence. | ||||
| CrlVlanUsageForbiddenListAfterReset1to1024 | 1.3.6.1.4.1.9.6.1.101.29.22.4.1.2 | VlanList1 | RW | |
column · VlanList1 · read-write · current A list of staticaly created vlans from 1 to 1024. | ||||
| CrlVlanUsageForbiddenListAfterReset1025to2048 | 1.3.6.1.4.1.9.6.1.101.29.22.4.1.3 | VlanList2 | RW | |
column · VlanList2 · read-write · current A list of according to the type field created vlans from 1025 to 2048. | ||||
| CrlVlanUsageForbiddenListAfterReset2049to3072 | 1.3.6.1.4.1.9.6.1.101.29.22.4.1.4 | VlanList3 | RW | |
column · VlanList3 · read-write · current A list of according to the type field created vlans from 2049 to 3072. | ||||
| CrlVlanUsageForbiddenListAfterReset3073to4094 | 1.3.6.1.4.1.9.6.1.101.29.22.4.1.5 | VlanList4 | RW | |
column · VlanList4 · read-write · current A list of according to the type field created vlans from 3073 to 4094. | ||||
| NrlDependendFeaturesEnableTuning | 1.3.6.1.4.1.9.6.1.101.29.23 | |||
| SrlDependendFeaturesEnabled | 1.3.6.1.4.1.9.6.1.101.29.23.1 | Bits | RO | |
scalar · Bits · read-only · current Current set of running features. These features combinations may limit by A. The same resource (such as ASIC module). B. limitation of product or logic for combination System limit is for up to 5 features First implemented with 3.
| ||||
| SrlDependendFeaturesEnabledAfterReset | 1.3.6.1.4.1.9.6.1.101.29.23.2 | Bits | RW | |
scalar · Bits · read-write · current Next system load (after reset) set of running features. These features combinations limited by A. The same resource (such as ASIC module). B. Limitation of product or logic for combination (one feature override the other). C. Per product some or all features status may not be changed. System limit is for up to 5 features First implemented with 3.
| ||||
| NrlIpDhcpSnoopingTuning | 1.3.6.1.4.1.9.6.1.101.29.24 | |||
| SrlMaxIpDhcpSnoopingEntries | 1.3.6.1.4.1.9.6.1.101.29.24.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current maximum number of DHCP snooping entries. | ||||
| SrlMaxIpDhcpSnoopingEntriesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.24.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current The future (after reset) maximum number of DHCP snooping entries. | ||||
| NrlIscsiSnoopTuning | 1.3.6.1.4.1.9.6.1.101.29.25 | |||
| SrlIscsiSnoopMaxNumOfConnections | 1.3.6.1.4.1.9.6.1.101.29.25.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Defines the presetly effective upper limit of iSCSI connections number the device guarantees to support | ||||
| SrlIscsiSnoopMaxNumOfConnectionsAfterReset | 1.3.6.1.4.1.9.6.1.101.29.25.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the upper limit of iSCSI connections number the device will have to support following the looming System reset | ||||
| NrlDhcpServerTuning | 1.3.6.1.4.1.9.6.1.101.29.26 | |||
| SrlDhcpSrvMaxAllocatedAddresses | 1.3.6.1.4.1.9.6.1.101.29.26.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current Defines the maximal number of allocated addresses by DHCP server | ||||
| SrlDhcpSrvMaxAllocatedAddressesAfterReset | 1.3.6.1.4.1.9.6.1.101.29.26.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the maximal number of allocated addresses by DHCP server activated after reset | ||||
| SrlBrgMacHashChainLen | 1.3.6.1.4.1.9.6.1.101.29.27 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current depth of the MAC address hashing Table | ||||
| SrlBrgMacHashChainLenAfterReset | 1.3.6.1.4.1.9.6.1.101.29.28 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current Defines the depth in step of 4, of the MAC address hashing Table after reset. The mac chain length is the scalar value multiplied by 4. | ||||
| SrlBrgMacHashFunction | 1.3.6.1.4.1.9.6.1.101.29.29 | INTEGER | RO | |
scalar · INTEGER · read-only · current Current depth of the MAC address hashing Table
| ||||
| SrlBrgMacHashFunctionAfterReset | 1.3.6.1.4.1.9.6.1.101.29.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines hash function vlan random mac random vlan sequntial mac sequential vlan sequential mac random vlan random mac sequntial
| ||||