CISCOSB-TBI-MIB
ciscoSystemsTime Range Infrastructure MIBs initial version.
snmptranslate -m CISCOSB-TBI-MIB -Tpsnmpwalk -v2c -c <community> -m CISCOSB-TBI-MIB <host> 1.3.6.1.4.1.9.6.1.101.145Imports
| CISCOSB-MIB | switch001 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlTBIMib | 1.3.6.1.4.1.9.6.1.101.145 | |||
identity Time Range Infrastructure MIBs initial version. | ||||
| TrlTBITimeRangeTable | 1.3.6.1.4.1.9.6.1.101.145.1 | NA | ||
table · not-accessible · current This table specifies Time Based Infra table | ||||
| RrlTBITimeRangeEntry | 1.3.6.1.4.1.9.6.1.101.145.1.1 | NA | ||
row · not-accessible · current Each entry in this table describes the new time range for ACE. The index is time range name
| ||||
| CrlTBITimeRangeName | 1.3.6.1.4.1.9.6.1.101.145.1.1.1 | DisplayString (SIZE (1..32)) | NA | |
column · DisplayString (SIZE (1..32)) · not-accessible · current Name of time range. | ||||
| CrlTBITimeRangeAbsoluteStart | 1.3.6.1.4.1.9.6.1.101.145.1.1.2 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current Time of start of absolute time range in following format: month day year hh:mm month: 01-12 (January-December) day: 01-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) | ||||
| CrlTBITimeRangeAbsoluteEnd | 1.3.6.1.4.1.9.6.1.101.145.1.1.3 | DisplayString (SIZE (0..14)) | RW | |
column · DisplayString (SIZE (0..14)) · read-write · current Time of end of absolute time range in following format: month day year hh:mm month: 01-12 (January-December) day: 01-31 year: 0-99 (2000-2099) hh: 0-23 (hours) mm: 0-59 (minutes) | ||||
| CrlTBITimeRangeActiveStatus | 1.3.6.1.4.1.9.6.1.101.145.1.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current Shows whether the current time range is active according to the current clock. | ||||
| CrlTBITimeRangeRowStatus | 1.3.6.1.4.1.9.6.1.101.145.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. It is used for adding/deleting entries of this table. | ||||
| TrlTBIPeriodicTable | 1.3.6.1.4.1.9.6.1.101.145.2 | NA | ||
table · not-accessible · current This table specifies Time Based Infra Periodic table | ||||
| RrlTBIPeriodicEntry | 1.3.6.1.4.1.9.6.1.101.145.2.1 | NA | ||
row · not-accessible · current Each entry in this table describes periodic time range. | ||||
| CrlTBIPeriodicTimeRangeName | 1.3.6.1.4.1.9.6.1.101.145.2.1.1 | DisplayString (SIZE (1..32)) | NA | |
column · DisplayString (SIZE (1..32)) · not-accessible · current Time Range Name the periodic is defined on. | ||||
| CrlTBIPeriodicWeekDayList | 1.3.6.1.4.1.9.6.1.101.145.2.1.2 | RlTBIWeekDayList | RW | |
column · RlTBIWeekDayList · read-write · current The bitmap allows to user to select periodic time range for several days at once. The periodic range will be associated with specific days when corresponding bits will be set. If at least one bit has been set in the rlTBIPeriodicWeekDayList, the weekday in rlTBIPeriodicStart and rlTBIPeriodicEnd is not relevant and should be set to zero. | ||||
| CrlTBIPeriodicStart | 1.3.6.1.4.1.9.6.1.101.145.2.1.3 | DisplayString (SIZE (0..7)) | RW | |
column · DisplayString (SIZE (0..7)) · read-write · current Time of start of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minutes)
Weekday may be 0 only if periodic time range weekdays were specified in
rlTBIPeriodicWeekDayList. | ||||
| CrlTBIPeriodicEnd | 1.3.6.1.4.1.9.6.1.101.145.2.1.4 | DisplayString (SIZE (0..7)) | RW | |
column · DisplayString (SIZE (0..7)) · read-write · current Time of end of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minutes)
Weekday may be 0 only if periodic time range weekdays were specified in
rlTBIPeriodicWeekDayList. | ||||
| CrlTBIPeriodicRowStatus | 1.3.6.1.4.1.9.6.1.101.145.2.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current Row Status. It is used for adding/deleting entries of this table. | ||||
Textual conventions
RlTBIWeekDayListBitsfriday(4)monday(0)saturday(5)sunday(6)thursday(3)tuesday(1)wednesday(2)Bitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week.