CISCOSB-POE-MIB
ciscoSystemsAdd a new field in the PoE MIB to indicate Max power allocation allowed
snmptranslate -m CISCOSB-POE-MIB -Tpsnmpwalk -v2c -c <community> -m CISCOSB-POE-MIB <host> 1.3.6.1.4.1.9.6.1.101.108Imports
| CISCOSB-MIB | switch001 |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IrlPoe | 1.3.6.1.4.1.9.6.1.101.108 | ||||||||||||||||||||
identity Add a new field in the PoE MIB to indicate Max power allocation allowed | |||||||||||||||||||||
| TrlPethPsePortTable | 1.3.6.1.4.1.9.6.1.101.108.1 | NA | |||||||||||||||||||
table · not-accessible · current The table listing additional information for Power Over Ethernet ports. | |||||||||||||||||||||
| RrlPethPsePortEntry | 1.3.6.1.4.1.9.6.1.101.108.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the rlPethPsePortTable. | |||||||||||||||||||||
| CrlPethPsePortGroupIndex | 1.3.6.1.4.1.9.6.1.101.108.1.1.1 | INTEGER (1..2147483647) | NA | ||||||||||||||||||
column · INTEGER (1..2147483647) · not-accessible · current This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | |||||||||||||||||||||
| CrlPethPsePortIndex | 1.3.6.1.4.1.9.6.1.101.108.1.1.2 | INTEGER (1..2147483647) | NA | ||||||||||||||||||
column · INTEGER (1..2147483647) · not-accessible · current This variable uniquely identifies the power Ethernet PSE port within group pethPsePortGroupIndex to which the power Ethernet PSE entry is connected. | |||||||||||||||||||||
| CrlPethPsePortOutputVoltage | 1.3.6.1.4.1.9.6.1.101.108.1.1.3 | INTEGER (0..2147483647) | RO | 0 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates on the output voltage level in milli volts from rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortOutputCurrent | 1.3.6.1.4.1.9.6.1.101.108.1.1.4 | INTEGER (0..2147483647) | RO | 0 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates on the output current level in milli amper from rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortOutputPower | 1.3.6.1.4.1.9.6.1.101.108.1.1.5 | INTEGER (0..2147483647) | RO | 10767 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates on the output power level in milli watts from rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortPowerLimit | 1.3.6.1.4.1.9.6.1.101.108.1.1.6 | INTEGER (0..2147483647) | RW | 30000 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-write · current This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortStatus | 1.3.6.1.4.1.9.6.1.101.108.1.1.7 | INTEGER (0..2147483647) | RO | 19 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates on the hardware status of rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortStatusDescription | 1.3.6.1.4.1.9.6.1.101.108.1.1.8 | DisplayString (SIZE (0..120)) | RO | Port is off. User setting | |||||||||||||||||
column · DisplayString (SIZE (0..120)) · read-only · current This variable indicates the description of the hardware status of rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortOperPowerLimit | 1.3.6.1.4.1.9.6.1.101.108.1.1.9 | INTEGER (0..2147483647) | RO | 30000 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortTimeRangeName | 1.3.6.1.4.1.9.6.1.101.108.1.1.10 | DisplayString (SIZE (0..32)) | RW | | |||||||||||||||||
column · DisplayString (SIZE (0..32)) · read-write · current This variable is used to bind PoE port to time range. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortOperStatus | 1.3.6.1.4.1.9.6.1.101.108.1.1.11 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortMaxPowerAllocAllowed | 1.3.6.1.4.1.9.6.1.101.108.1.1.12 | INTEGER (0..2147483647) | RO | 30000 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortSupportPoeType | 1.3.6.1.4.1.9.6.1.101.108.1.1.13 | RlPoeType | RO | 3 | |||||||||||||||||
column · RlPoeType · read-only · current This variable indicates the supported type of the PoE port Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortLinkPartnerPoeType | 1.3.6.1.4.1.9.6.1.101.108.1.1.14 | RlPoeType | RO | 1 | |||||||||||||||||
column · RlPoeType · read-only · current This variable indicates the link partner PoE type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortFourPairForced | 1.3.6.1.4.1.9.6.1.101.108.1.1.15 | INTEGER | RW | forcedDisable(1) | |||||||||||||||||
column · INTEGER · read-write · current This variable enabled the spare pair ALT_B in 60W port to force 4 pair enable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortFourPairEnabled | 1.3.6.1.4.1.9.6.1.101.108.1.1.16 | INTEGER | RO | fourPairDisable(2) | |||||||||||||||||
column · INTEGER · read-only · current This variable indicates that spare pair ALT_B is enable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortNegotiationAllocatedPower | 1.3.6.1.4.1.9.6.1.101.108.1.1.17 | INTEGER (0..2147483647) | RO | 0 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates the power allocation in milli watts from power negotiation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortNegotiationProtocolOwner | 1.3.6.1.4.1.9.6.1.101.108.1.1.18 | INTEGER | RO | protocolOwnerNone(0) | |||||||||||||||||
column · INTEGER · read-only · current This variable indicates the protocol owner on power management negotiation protocol
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortLegacySupport | 1.3.6.1.4.1.9.6.1.101.108.1.1.19 | INTEGER | RW | not-relevant(0) | |||||||||||||||||
column · INTEGER · read-write · current This variable identifies poe Legacy per port configuration mode
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortHighPowerModeEnable | 1.3.6.1.4.1.9.6.1.101.108.1.1.20 | INTEGER | RW | not-relevant(0) | |||||||||||||||||
column · INTEGER · read-write · current This variable identifies poe port high power configuration mode
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortMenagementMode | 1.3.6.1.4.1.9.6.1.101.108.1.1.21 | INTEGER | RW | not-relevant(0) | |||||||||||||||||
column · INTEGER · read-write · current This variable identifies poe power management mode configuration mode
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortStaticPowerAllocation | 1.3.6.1.4.1.9.6.1.101.108.1.1.22 | INTEGER (0..2147483647) | RO | 30000 | |||||||||||||||||
column · INTEGER (0..2147483647) · read-only · current This variable indicates PoE Static power allocation. Static power allocation can be configured by setting rlPethPsePortMenagementMode Example values from LibreNMS test devices
| |||||||||||||||||||||
| CrlPethPsePortHighPowerOpStatus | 1.3.6.1.4.1.9.6.1.101.108.1.1.23 | INTEGER | RO | disabled(2) | |||||||||||||||||
column · INTEGER · read-only · current This variable identifies the poe port high power status
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TrlPethMainPseTable | 1.3.6.1.4.1.9.6.1.101.108.2 | NA | |||||||||||||||||||
table · not-accessible · current The table listing additional read - only information for Power Over Ethernet. | |||||||||||||||||||||
| RrlPethMainPseEntry | 1.3.6.1.4.1.9.6.1.101.108.2.1 | NA | |||||||||||||||||||
| CrlPethMainPseGroupIndex | 1.3.6.1.4.1.9.6.1.101.108.2.1.1 | INTEGER (1..2147483647) | NA | ||||||||||||||||||
column · INTEGER (1..2147483647) · not-accessible · current This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, pethMainPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | |||||||||||||||||||||
| CrlPethMainPseSwVersion | 1.3.6.1.4.1.9.6.1.101.108.2.1.2 | DisplayString (SIZE (0..20)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current This variable identifies the MCU SW version. | |||||||||||||||||||||
| CrlPethMainPseHwVersion | 1.3.6.1.4.1.9.6.1.101.108.2.1.3 | DisplayString (SIZE (0..20)) | RO | obsolete | |||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-only · obsolete This variable identifies the MCU HW version. | |||||||||||||||||||||
| CrlPethMainPseHwType | 1.3.6.1.4.1.9.6.1.101.108.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable identifies the MCU HW type (enhanced, plus, none).
| |||||||||||||||||||||
| CrlPethMainPsePowerGuardBand | 1.3.6.1.4.1.9.6.1.101.108.2.1.5 | INTEGER (0..254) | RW | ||||||||||||||||||
column · INTEGER (0..254) · read-write · current This variable identifies the guard band in [W] for not connecting additional ports. | |||||||||||||||||||||
| CrlPethMainPsePowerManagementMode | 1.3.6.1.4.1.9.6.1.101.108.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies power management mode.
| |||||||||||||||||||||
| CrlPethMainPsedisconnectMethod | 1.3.6.1.4.1.9.6.1.101.108.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies disconnect method.
| |||||||||||||||||||||
| CrlPethMainPseTemperatureSensor | 1.3.6.1.4.1.9.6.1.101.108.2.1.8 | INTEGER (-200..200) | RO | ||||||||||||||||||
column · INTEGER (-200..200) · read-only · current This variable identifies the pd temperature sensor. | |||||||||||||||||||||
| CrlPethMainPseInrushTestEnabled | 1.3.6.1.4.1.9.6.1.101.108.2.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled.
| |||||||||||||||||||||
| CrlPethMainPseLegacyDisabled | 1.3.6.1.4.1.9.6.1.101.108.2.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies poe Legacy global configuration mode
| |||||||||||||||||||||
| CrlPethMainBanksValues | 1.3.6.1.4.1.9.6.1.101.108.2.1.11 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current This variable returns 16 power-banks of a specific switch | |||||||||||||||||||||
| CrlPethMainBanksActivePowerBank | 1.3.6.1.4.1.9.6.1.101.108.2.1.12 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable returns the active power-bank of a specific switch | |||||||||||||||||||||
| TrlPethPowerPseTable | 1.3.6.1.4.1.9.6.1.101.108.3 | NA | |||||||||||||||||||
table · not-accessible · current The table listing additional read-write information for Power Over Ethernet - PSE side. | |||||||||||||||||||||
| RrlPethPowerPseEntry | 1.3.6.1.4.1.9.6.1.101.108.3.1 | NA | |||||||||||||||||||
| CrlPethPowerPseGroupIndex | 1.3.6.1.4.1.9.6.1.101.108.3.1.1 | INTEGER (1..8) | NA | ||||||||||||||||||
column · INTEGER (1..8) · not-accessible · current This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | |||||||||||||||||||||
| CrlPethPowerPsePower | 1.3.6.1.4.1.9.6.1.101.108.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies the maximum power in [W] supplied by PSE.
| |||||||||||||||||||||
| CrlPethPowerPseRpsPower | 1.3.6.1.4.1.9.6.1.101.108.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies the maximum power in [W] supplied by PSE + RPS.
| |||||||||||||||||||||
| CrlPethPowerPsePowerManagementMode | 1.3.6.1.4.1.9.6.1.101.108.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies power management mode.
| |||||||||||||||||||||
| CrlPethPowerPsedisconnectMethod | 1.3.6.1.4.1.9.6.1.101.108.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies disconnect method.
| |||||||||||||||||||||
| CrlPethPowerPseTemperatureSensor | 1.3.6.1.4.1.9.6.1.101.108.3.1.6 | INTEGER (-200..200) | RO | ||||||||||||||||||
column · INTEGER (-200..200) · read-only · current This variable identifies the pd temperature sensor. | |||||||||||||||||||||
| CrlPethPowerPseInrushTestEnabled | 1.3.6.1.4.1.9.6.1.101.108.3.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies if HW inrush test will be disabled. by default HW inrush test is enabled.
| |||||||||||||||||||||
| CrlPethPowerPseLegacyDisabled | 1.3.6.1.4.1.9.6.1.101.108.3.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This variable identifies poe Legacy global configuration mode
| |||||||||||||||||||||
| CrlPethPowerBanksValues | 1.3.6.1.4.1.9.6.1.101.108.3.1.9 | OCTET STRING | RO | ||||||||||||||||||
column · OCTET STRING · read-only · current This variable returns 16 power-banks of a specific switch | |||||||||||||||||||||
| CrlPethPowerBanksActivePowerBank | 1.3.6.1.4.1.9.6.1.101.108.3.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable returns the active power-bank of a specific switch | |||||||||||||||||||||
| TrlPethPdPortTable | 1.3.6.1.4.1.9.6.1.101.108.4 | NA | |||||||||||||||||||
table · not-accessible · current The table listing additional read-write information for Power Over Ethernet - PD side. | |||||||||||||||||||||
| RrlPethPdPortEntry | 1.3.6.1.4.1.9.6.1.101.108.4.1 | NA | |||||||||||||||||||
| CrlPethPdPortIndex | 1.3.6.1.4.1.9.6.1.101.108.4.1.1 | InterfaceIndex | NA | ||||||||||||||||||
column · InterfaceIndex · not-accessible · current This variable uniquely identifies the power Ethernet PD port within group rlPethPdPortGroupIndex to which the power Ethernet PSE entry is connected. | |||||||||||||||||||||
| CrlPethPdPortSupportPoeType | 1.3.6.1.4.1.9.6.1.101.108.4.1.2 | RlPoeType | RO | ||||||||||||||||||
column · RlPoeType · read-only · current This variable indicates the PoE type of the PD port (AF/AT/60W) | |||||||||||||||||||||
| CrlPethPdPortOperPoeType | 1.3.6.1.4.1.9.6.1.101.108.4.1.3 | RlPoeType | RO | ||||||||||||||||||
column · RlPoeType · read-only · current This variable indicates the operational PoE status of the PD port | |||||||||||||||||||||
| CrlPethPdPortPowerRequest | 1.3.6.1.4.1.9.6.1.101.108.4.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This variable indicates the requested power the PD port request from the PSE in mili-Watts | |||||||||||||||||||||
| CrlPethPdPortPowerAvailable | 1.3.6.1.4.1.9.6.1.101.108.4.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This variable indicates the available power the PSE port offers to the PD port in mili-Watts | |||||||||||||||||||||
| CrlPethPdPortForcedMode | 1.3.6.1.4.1.9.6.1.101.108.4.1.6 | RlPoeType | RW | ||||||||||||||||||
column · RlPoeType · read-write · current This variable indicates the powered PD port forced mode | |||||||||||||||||||||
| CrlPethPdPortNegotiationProtocolOwner | 1.3.6.1.4.1.9.6.1.101.108.4.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable indicates the protocol owner on power management negotiation protocol
| |||||||||||||||||||||
| TrlPethPseUnitTable | 1.3.6.1.4.1.9.6.1.101.108.5 | NA | |||||||||||||||||||
table · not-accessible · current The table listing additional read-write information for Power Over Ethernet unit capabilities. | |||||||||||||||||||||
| RrlPethPseUnitEntry | 1.3.6.1.4.1.9.6.1.101.108.5.1 | NA | |||||||||||||||||||
| CrlPethUnitIndex | 1.3.6.1.4.1.9.6.1.101.108.5.1.1 | INTEGER (1..8) | NA | ||||||||||||||||||
column · INTEGER (1..8) · not-accessible · current This variable uniquely identifies the unit id. It means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. Furthermore, the same value MUST be used in this variable, PethPowerPseGroupIndex, and pethNotificationControlGroupIndex to refer to a given box in a stack or module in the rack. | |||||||||||||||||||||
| CrlPethUnitType | 1.3.6.1.4.1.9.6.1.101.108.5.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable identifies the unit type (PSE/PD/Both/None).
| |||||||||||||||||||||
| CrlPethUnitColor | 1.3.6.1.4.1.9.6.1.101.108.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This variable identifies the unit PSE status (color can be green,yellow,red).
| |||||||||||||||||||||
| SrlPethPseCountersClear | 1.3.6.1.4.1.9.6.1.101.108.6 | InterfaceIndexOrZero | RW | ||||||||||||||||||
scalar · InterfaceIndexOrZero · read-write · current Clear poe port counter. By setting the MIB to 0x0FFFFFFF, all poe ports counters are set to zero. by Setting to port index, all specific poe port counters are set to zero | |||||||||||||||||||||
| SrlPoeClassErrorDetectionStatus | 1.3.6.1.4.1.9.6.1.101.108.8 | TruthValue | RW | ||||||||||||||||||
scalar · TruthValue · read-write · current Specifies if class detection error is enabled (true) or disabled (false) | |||||||||||||||||||||
| TrlPethPerPseTable | 1.3.6.1.4.1.9.6.1.101.108.9 | NA | |||||||||||||||||||
table · not-accessible · current The table listing additional information for Power Over Ethernet ports per PSE device. | |||||||||||||||||||||
| RrlPethPerPseEntry | 1.3.6.1.4.1.9.6.1.101.108.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the rlPethPerPseTable. | |||||||||||||||||||||
| CrlPethPerPseGroupIndex | 1.3.6.1.4.1.9.6.1.101.108.9.1.1 | INTEGER (1..8) | NA | ||||||||||||||||||
column · INTEGER (1..8) · not-accessible · current This variable uniquely identifies the group containing the port to which a power Ethernet PSE is connected. Group means box in the stack, module in a rack and the value 1 MUST be used for non-modular devices. | |||||||||||||||||||||
| CrlPethPerPseDeviceIndex | 1.3.6.1.4.1.9.6.1.101.108.9.1.2 | INTEGER (0..7) | NA | ||||||||||||||||||
column · INTEGER (0..7) · not-accessible · current This variable uniquely identifies the PSE device within the group. | |||||||||||||||||||||
| CrlPethPerPseTemperatureValue | 1.3.6.1.4.1.9.6.1.101.108.9.1.3 | INTEGER (-200..200) | RO | ||||||||||||||||||
column · INTEGER (-200..200) · read-only · current This variable represents temperature reported from PSE device. | |||||||||||||||||||||
| CrlPethPerPseHwRevision | 1.3.6.1.4.1.9.6.1.101.108.9.1.4 | DisplayString (SIZE (0..20)) | RO | ||||||||||||||||||
column · DisplayString (SIZE (0..20)) · read-only · current This variable identifies the MCU HW version. | |||||||||||||||||||||
| CrlPethPerPseVopStatus | 1.3.6.1.4.1.9.6.1.101.108.9.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Specifies status of VoP problem in PoE device
| |||||||||||||||||||||
| SrlPethPsePortReactivate | 1.3.6.1.4.1.9.6.1.101.108.10 | PortList | RW | ||||||||||||||||||
scalar · PortList · read-write · current Action MIB scalar. In case the ports in the port-list are disabled due to PoE HW error, the PoE mechanism will try to re-activate them. | |||||||||||||||||||||
Textual conventions
RlPoeTypeINTEGERnone(1)poe(2)poe60w(4)poeBT(5)poeplus(3)PoE types: 1 - none: no PoE, unknown type; 2 - PoE: Standard AF PoE 3 - PoE Plus: Standard AT PoE 4 - 60 W: 60W poe port 5 - PoE BT: 802.3BT standard