CISCOSB-PNP
ciscoSystemsThe private MIB module definition for PNP Agent.
snmptranslate -m CISCOSB-PNP -Tpsnmpwalk -v2c -c <community> -m CISCOSB-PNP <host> 1.3.6.1.4.1.9.6.1.101.234Imports
| CISCOSB-MIB | switch001 |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlPNP | 1.3.6.1.4.1.9.6.1.101.234 | |||
identity The private MIB module definition for PNP Agent. | ||||
| TrlPNPParamsTable | 1.3.6.1.4.1.9.6.1.101.234.1 | NA | ||
table · not-accessible · current The PnP table has unique structure. It contains PnP agent parameters. It MUST have exactly 2 entries - One, represents the current parameters Second, represents the next session parameters. Since session cannot be interrupted in the middle, the next parameters will replace the current parameters after session ends. Each parameter can be configured manually or by DHCP or by Backoff message. | ||||
| RrlPNPParamsEntry | 1.3.6.1.4.1.9.6.1.101.234.1.1 | NA | ||
| CrlPNPParamsAvailability | 1.3.6.1.4.1.9.6.1.101.234.1.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current The availability of parameters: Current the parameters that are currently used by session. Next the parameters that will be used after end of session
| ||||
| CrlPNPServerAddrType | 1.3.6.1.4.1.9.6.1.101.234.1.1.2 | InetAddressType | RW | |
column · InetAddressType · read-write · current The type of PnP server address. | ||||
| CrlPNPServerAddr | 1.3.6.1.4.1.9.6.1.101.234.1.1.3 | InetAddress | RW | |
column · InetAddress · read-write · current The PnP server address. Default value is: PnPserver | ||||
| CrlPNPServerAddrOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.4 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the PnP server address. | ||||
| CrlPNPProtocol | 1.3.6.1.4.1.9.6.1.101.234.1.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current The PnP transport protocol.
| ||||
| CrlPNPProtocolOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.6 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the transport protocol. | ||||
| CrlPNPHTTPPort | 1.3.6.1.4.1.9.6.1.101.234.1.1.7 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current The PnP HTTP port. | ||||
| CrlPNPHTTPPortOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.8 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the HTTP port. | ||||
| CrlPNPHTTPSPort | 1.3.6.1.4.1.9.6.1.101.234.1.1.9 | Unsigned32 (1..65535) | RW | |
column · Unsigned32 (1..65535) · read-write · current The PnP HTTPS port. | ||||
| CrlPNPHTTPSPortOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.10 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the HTTPS port. | ||||
| CrlPNPUserName | 1.3.6.1.4.1.9.6.1.101.234.1.1.11 | DisplayString | RW | |
column · DisplayString · read-write · current This variable is used in each message from PnP agent to PnP server. | ||||
| CrlPNPUserNameOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.12 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the PnP user name. | ||||
| CrlPNPPassword | 1.3.6.1.4.1.9.6.1.101.234.1.1.13 | SnmpAdminString (SIZE (0..64)) | RW | |
column · SnmpAdminString (SIZE (0..64)) · read-write · current This variable optional and is used in each message from PnP agent to PnP server. | ||||
| CrlPNPPasswordOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.14 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the PnP password | ||||
| CrlPNPDiscoveryTimeout | 1.3.6.1.4.1.9.6.1.101.234.1.1.15 | Unsigned32 (1..2000000) | RW | |
column · Unsigned32 (1..2000000) · read-write · current The time to wait in seconds before new discovery after discovery failure. | ||||
| CrlPNPDiscoveryTimeoutOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.16 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the discovery timeout | ||||
| CrlPNPDiscoveryExpoFactor | 1.3.6.1.4.1.9.6.1.101.234.1.1.17 | Unsigned32 (1..9) | RW | |
column · Unsigned32 (1..9) · read-write · current The value that triggers the discovery attempt exponentially. | ||||
| CrlPNPDiscoveryExpoFactorOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.18 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the discovery exponent factor | ||||
| CrlPNPDiscoveryTimeoutMax | 1.3.6.1.4.1.9.6.1.101.234.1.1.19 | Unsigned32 (1..2000000) | RW | |
column · Unsigned32 (1..2000000) · read-write · current The maximum value of the timeout. | ||||
| CrlPNPDiscoveryTimeoutMaxOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.20 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the discovery timeout max | ||||
| CrlPNPReconnectTimeout | 1.3.6.1.4.1.9.6.1.101.234.1.1.21 | Unsigned32 (1..2000000) | RW | |
column · Unsigned32 (1..2000000) · read-write · current Timeout in seconds between PnP sessions. | ||||
| CrlPNPReconnectTimeoutOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.22 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the PnP reconnect timeout. | ||||
| CrlPNPSrcAddrTyp | 1.3.6.1.4.1.9.6.1.101.234.1.1.23 | InetAddressType | RW | |
column · InetAddressType · read-write · current The PnP source address type. | ||||
| CrlPNPSrcAddr | 1.3.6.1.4.1.9.6.1.101.234.1.1.24 | InetAddress | RW | |
column · InetAddress · read-write · current The PnP source address. | ||||
| CrlPNPSrcAddrOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.25 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the source address. | ||||
| CrlPNPWatchdogTimeout | 1.3.6.1.4.1.9.6.1.101.234.1.1.26 | Unsigned32 (1..180) | RW | |
column · Unsigned32 (1..180) · read-write · current The time to wait a reply from a PnP or File server. | ||||
| CrlPNPWatchdogTimeoutOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.27 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the watchdog timeout. | ||||
| CrlPNPAdminState | 1.3.6.1.4.1.9.6.1.101.234.1.1.28 | INTEGER | RW | |
column · INTEGER · read-write · current The value represents the admin state of the PnP feature.
| ||||
| CrlPNPAdminStateOwner | 1.3.6.1.4.1.9.6.1.101.234.1.1.29 | RlOwnerType | RW | |
column · RlOwnerType · read-write · current The entity that configured the admin state. | ||||
| CrlPNPRowStatus | 1.3.6.1.4.1.9.6.1.101.234.1.1.30 | RowStatus | RC | |
column · RowStatus · read-create · current This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | ||||
| SrlPNPResume | 1.3.6.1.4.1.9.6.1.101.234.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Action scalar - take out immediately the PnP agent from waiting state.
| ||||
| SrlPNPNreadyReason | 1.3.6.1.4.1.9.6.1.101.234.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Displays the reason for the not ready operational state.
| ||||
| SrlPNPState | 1.3.6.1.4.1.9.6.1.101.234.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Displays the PnP agent state.
| ||||
| SrlPNPTimerRemainder | 1.3.6.1.4.1.9.6.1.101.234.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current Displays the session/discovery timer remainder. | ||||
Textual conventions
RlOwnerTypeINTEGERrlOwnerDHCP(3)rlOwnerDefault(1)rlOwnerDelete(5)rlOwnerNone(0)rlOwnerProtocol(4)rlOwnerStatic(2)The entity that configured parameter.