CISCOSB-LBD-MIB
ciscoSystemsThe private MIB module definition for Loopback Detection MIB.
snmptranslate -m CISCOSB-LBD-MIB -Tpsnmpwalk -v2c -c <community> -m CISCOSB-LBD-MIB <host> 1.3.6.1.4.1.9.6.1.101.127Imports
| CISCOSB-MIB | switch001 |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlLbd | 1.3.6.1.4.1.9.6.1.101.127 | |||
identity The private MIB module definition for Loopback Detection MIB. | ||||
| SrlLbdEnable | 1.3.6.1.4.1.9.6.1.101.127.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable/Disable Loopback Detection in the switch. | ||||
| SrlLbdDetectionInterval | 1.3.6.1.4.1.9.6.1.101.127.2 | INTEGER (5..60) | RW | |
scalar · INTEGER (5..60) · read-write · current The time in seconds that should pass between unicast LBD packets.
| ||||
| SrlLbdMode | 1.3.6.1.4.1.9.6.1.101.127.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Loopback detection mode.
| ||||
| TrlLbdPortTable | 1.3.6.1.4.1.9.6.1.101.127.4 | NA | ||
table · not-accessible · current The table contains Admin configuration and operational status per port. | ||||
| RrlLbdPortEntry | 1.3.6.1.4.1.9.6.1.101.127.4.1 | NA | ||
row · not-accessible · current Each entry represent a port. Per port contains LBD Admin configuration (SET) and status (GET), LBD Operational status and LBD Vlan configuration (SET) and status (GET).
| ||||
| CrlLbdPortAdminStatus | 1.3.6.1.4.1.9.6.1.101.127.4.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Enable/Disable Loopback Detection on port
| ||||
| CrlLbdPortOperStatus | 1.3.6.1.4.1.9.6.1.101.127.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates Loopback Detection operational status on port. 'inactive' means that the port is not working in loop-detected operational state; 'active' means that the port is Up and working in state of loop-detecting; 'loop-detected' means that the system has detected loop on the port.
| ||||