CISCOSB-EVENTS-MIB
ciscoSystemsMTS events MIB.
snmptranslate -m CISCOSB-EVENTS-MIB -Tpsnmpwalk -v2c -c <community> -m CISCOSB-EVENTS-MIB <host> 1.3.6.1.4.1.9.6.1.101.150Imports
| CISCOSB-MIB | switch001 |
|---|---|
| CISCOSB-SMARTPORTS-MIB | RlSmartPortsMacroNameOrZero |
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
| RFC1155-SMI | Counter32 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IrlEventsMib | 1.3.6.1.4.1.9.6.1.101.150 | |||
identity MTS events MIB. | ||||
| NrlPortEvents | 1.3.6.1.4.1.9.6.1.101.150.1 | |||
| SrlAutoSmartPortAdminStatus | 1.3.6.1.4.1.9.6.1.101.150.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current disabled - Auto Smart port feature is administratively disabled. enabled - Auto Smart port feature is administratively enabled. controlled - Auto Smart port feature is administratively controlled by VOICE VLAN.
| ||||
| SrlAutoSmartPortOperStatus | 1.3.6.1.4.1.9.6.1.101.150.1.2 | INTEGER | RO | |
scalar · INTEGER · read-only · current disabled - Auto Smart port feature is operationally disabled. enabled - Auto Smart port feature is operationally enabled.
| ||||
| SrlAutoSmartPortLastVoiceVlanStatus | 1.3.6.1.4.1.9.6.1.101.150.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicated last status set by VOICE VLAN feature. If rlAutoSmartPortAdminStatus has 'controlled' value then the value of this object is the same as rlAutoSmartPortOperStatus. enabled - Auto Smart port feature should be operationally enabled, if rlAutoSmartPortAdminStatus has 'controlled' value. disabled - Auto Smart port feature should be operationally disabled, if rlAutoSmartPortAdminStatus has 'controlled' value
| ||||
| SrlAutoSmartPortLastVoiceVlanId | 1.3.6.1.4.1.9.6.1.101.150.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicated last VOICE VLAN ID set by VOICE VLAN feature. | ||||
| SrlAutoSmartPortLearningProtocols | 1.3.6.1.4.1.9.6.1.101.150.1.5 | Bits | RW | |
scalar · Bits · read-write · current cdp - Information about device type of neighboring devices(s) is learnt
via CDP (Cisco Discovery Protocol) advertisements.
lldp - Information about device type of neighboring devices(s) is learnt
via LLDP (Link Layer Discovery Protocol ) advertisements.
| ||||
| TrlAutoSmartPortTypesTable | 1.3.6.1.4.1.9.6.1.101.150.1.6 | NA | ||
table · not-accessible · current The table is used to keep all the information related to a specific port type. | ||||
| RrlAutoSmartPortTypesEntry | 1.3.6.1.4.1.9.6.1.101.150.1.6.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the rlAutoSmartPortTypesTable. | ||||
| CrlAutoSmartPortTypesType | 1.3.6.1.4.1.9.6.1.101.150.1.6.1.1 | SmartPortType | NA | |
column · SmartPortType · not-accessible · current Smart port type. | ||||
| CrlAutoSmartPortTypeStatus | 1.3.6.1.4.1.9.6.1.101.150.1.6.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Smart port type global status.
| ||||
| CrlAutoSmartPortMacro | 1.3.6.1.4.1.9.6.1.101.150.1.6.1.3 | RlSmartPortsMacroNameOrZero | RW | |
column · RlSmartPortsMacroNameOrZero · read-write · current Macro to be activated when a port is set to the smart port type indicated by rlAutoSmartPortTypesType. The macro whose name is 'no_'<rlAutoSmartPortMacro> is activated when a port ceases to be of this smart port type. | ||||
| CrlAutoSmartPortTypesRevertToDefaultMacro | 1.3.6.1.4.1.9.6.1.101.150.1.6.1.4 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this object will cause the smart port type macro associated with this smart port type to revert to the default macro. | ||||
| CrlAutoSmartPortTypesRevertToDefaultParams | 1.3.6.1.4.1.9.6.1.101.150.1.6.1.5 | TruthValue | RW | |
column · TruthValue · read-write · current Setting this object will cause the default smart port type parameter values associated with the built-in macro of this smart port type to revert to their default values. | ||||
| CrlAutoSmartPortTypesBuiltinMacro | 1.3.6.1.4.1.9.6.1.101.150.1.6.1.6 | SmartPortMacroType | RO | |
column · SmartPortMacroType · read-only · current Indicates whether the macro is built-in or user defined. | ||||
| TrlAutoSmartPortMacrosParamTable | 1.3.6.1.4.1.9.6.1.101.150.1.7 | NA | ||
table · not-accessible · current The table is used to keep all the default parameter values related to a specific port type. | ||||
| RrlAutoSmartPortMacrosParamEntry | 1.3.6.1.4.1.9.6.1.101.150.1.7.1 | NA | ||
row · not-accessible · current A parameter name & default value pair for a smart port type macro. | ||||
| CrlAutoSmartPortMacroType | 1.3.6.1.4.1.9.6.1.101.150.1.7.1.1 | SmartPortMacroType | NA | |
column · SmartPortMacroType · not-accessible · current Macro type - built-in or user defined. | ||||
| CrlAutoSmartPortMacrosParamName | 1.3.6.1.4.1.9.6.1.101.150.1.7.1.2 | SmartPortMacroParameterName | NA | |
column · SmartPortMacroParameterName · not-accessible · current Name of the parameter to be supplied at smart port macro activation. | ||||
| CrlAutoSmartPortMacrosParamOrder | 1.3.6.1.4.1.9.6.1.101.150.1.7.1.3 | SmartPortMacroParameterOrder | RW | |
column · SmartPortMacroParameterOrder · read-write · current Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row. Setting this object to 'middle' instructs the system to wait for further parameters. Setting this object to 'last' informs the system that no further parameters will be sent and therefore it can start the macro or builtin parameters change process. Setting this object to 'single' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row and informs the system that no further parameters will be sent and therefore it can start macro or builtin parameters change process. | ||||
| CrlAutoSmartPortMacrosParamValue | 1.3.6.1.4.1.9.6.1.101.150.1.7.1.4 | SmartPortMacroParameterValue | RW | |
column · SmartPortMacroParameterValue · read-write · current Default value of the parameter to be supplied at smart port macro activation. | ||||
| TrlAutoSmartPortPortsTable | 1.3.6.1.4.1.9.6.1.101.150.1.8 | NA | ||
table · not-accessible · current The table is used to keep all the auto smart port information related to a specific port. | ||||
| RrlAutoSmartPortPortsEntry | 1.3.6.1.4.1.9.6.1.101.150.1.8.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the rlAutoSmartPortPortsTable.
| ||||
| CrlAutoSmartPortPort | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The port to which the smartport information is associated. | ||||
| CrlAutoSmartPortPortStatus | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates whether auto smart port feature is enabled or not on this port.
| ||||
| CrlAutoSmartPortPortType | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.3 | SmartPortType | RW | |
column · SmartPortType · read-write · current Smart port type associated with this port. If set by user, the port will retain the smart port type at link down, link not present and reboot events. | ||||
| CrlAutoSmartPortPersistency | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current If set to persistent then, if the system concludes, according to the information learnt there is no relevant device connected to the port, the rlAutoSmartPortPortType will not be changed (as if the user set this rlAutoSmartPortPortType himself), except on learning another rlAutoSmartPortPortType.
| ||||
| CrlAutoSmartPortLearntPortType | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.5 | SmartPortType | RO | |
column · SmartPortType · read-only · current Smart port type learnt via the learning protocols. This value will be different from rlAutoSmartPortPortType only if rlAutoSmartPortPortType was manually configured (i.e. if the value of rlAutoSmartPortPortAcquiringType is 'configuration'). The value of the object is used to set the value of rlAutoSmartPortPortType if the user removes the configuration. | ||||
| CrlAutoSmartPortPortAcquiringType | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Indicates the way that the value of rlAutoSmartPortPortType was acquired. This object can be set only during configuration download.
| ||||
| CrlAutoSmartPortLastActivatedMacro | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.7 | RlSmartPortsMacroNameOrZero | RO | |
column · RlSmartPortsMacroNameOrZero · read-only · current Indicates macro name of last activated macro or 'no macro' if no macro was run. | ||||
| CrlAutoSmartPortFailedCommandNumber | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates number of command (starting with 1) that caused the macro failure or 0 if the macro succeeded or no macro was run. | ||||
| CrlAutoSmartPortSetLearntPortType | 1.3.6.1.4.1.9.6.1.101.150.1.8.1.9 | TruthValue | RW | |
column · TruthValue · read-write · current Instructs the system to set the port type to the learnt port type. | ||||
| TrlAutoSmartPortParamsTable | 1.3.6.1.4.1.9.6.1.101.150.1.9 | NA | ||
table · not-accessible · current This table optionally determines the parameter values for the macro that is activated when the smartport type is manually changed for a specific port or trunk via the rlAutoSmartPortPortType object. | ||||
| RrlAutoSmartPortParamsEntry | 1.3.6.1.4.1.9.6.1.101.150.1.9.1 | NA | ||
row · not-accessible · current A parameter name & immediate value. | ||||
| CrlAutoSmartPortIfIndex | 1.3.6.1.4.1.9.6.1.101.150.1.9.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The port or trunk that this entry is associated with. | ||||
| CrlAutoSmartPortParamName | 1.3.6.1.4.1.9.6.1.101.150.1.9.1.2 | SmartPortMacroParameterName | NA | |
column · SmartPortMacroParameterName · not-accessible · current Name of the parameter whose value must be supplied at a smart port macro activation. | ||||
| CrlAutoSmartPortParamOrder | 1.3.6.1.4.1.9.6.1.101.150.1.9.1.3 | SmartPortMacroParameterOrder | RW | |
column · SmartPortMacroParameterOrder · read-write · current Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row. Setting this object to 'middle' instructs the system to wait for further parameters. Setting this object to 'last' informs the system that no further parameters will be sent and therefore it can start applying the smartport type. Setting this object to 'single' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row and informs the system that no further parameters will be sent and informs the system that no further parameters will be sent and therefore it can start applying the smartport type. | ||||
| CrlAutoSmartPortParamValue | 1.3.6.1.4.1.9.6.1.101.150.1.9.1.4 | SmartPortMacroParameterValue | NA | |
column · SmartPortMacroParameterValue · not-accessible · current Value of the parameter whose value must be supplied at a smart port macro activation. | ||||
| TrlAutoSmartTrunkRefreshTable | 1.3.6.1.4.1.9.6.1.101.150.1.10 | NA | ||
table · not-accessible · current Setting this object causes running the SmartPort macros of the following types: router, switch and ap. This operation is called the trunk refresh operation. | ||||
| RrlAutoSmartTrunkRefreshEntry | 1.3.6.1.4.1.9.6.1.101.150.1.10.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the rlAutoSmartTrunkRefreshTable. | ||||
| CrlAutoSmartTrunkRefreshSmartPortType | 1.3.6.1.4.1.9.6.1.101.150.1.10.1.1 | INTEGER | NA | |
column · INTEGER · not-accessible · current If not default the trunk refresh operation will be carried out on all ports of this smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the port specifed by rlAutoSmartTrunkRefreshIfIndex if it's type matches the given this smart port type (if not matching a wrong-value error will be return). If default the trunk refresh operation will be carried out on all ports of router, switch and ap smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the port specifed by rlAutoSmartTrunkRefreshIfIndex.
| ||||
| CrlAutoSmartTrunkRefreshIfIndex | 1.3.6.1.4.1.9.6.1.101.150.1.10.1.2 | InterfaceIndexOrZero | NA | |
column · InterfaceIndexOrZero · not-accessible · current If 0 the trunk refresh operation will be carried out on all ports of the smart port type as specified in the rlAutoSmartTrunkRefreshSmartPortType. If nonzero the trunk refresh operation will be carried out on the specified port, if rlAutoSmartTrunkRefreshSmartPortType is default or matches the smart port type of the specified port. Any other case will result in a wrong-value error. | ||||
| CrlAutoSmartTrunkRefreshRowStatus | 1.3.6.1.4.1.9.6.1.101.150.1.10.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current Since this an action table only createAndGo will be accepted and the conceptual row will vanish immediately after the action execution. | ||||
| SrlAutoSmartBusy | 1.3.6.1.4.1.9.6.1.101.150.1.11 | TruthValue | RO | |
scalar · TruthValue · read-only · current If true indicates that the autosmartports system is temporarily busy performing a multiport operation and therefore can not service management requests for the time-being. | ||||
Textual conventions
SmartPortMacroParameterNameDisplayString (SIZE (1..32))Smart macro parameter name.
SmartPortMacroParameterOrderINTEGERfirst(2)last(4)middle(3)single(1)Smart macro parameter order.
SmartPortMacroParameterValueDisplayString (SIZE (1..80))Smart macro parameter value.
SmartPortMacroTypeINTEGERbuilt-in(1)user-defined(2)Smart macro type - built-in or user-defined.
SmartPortTypeINTEGERap(13)default(2)desktop(4)guest(5)host(7)ip-camera(8)ip-phone(9)ip-phone-desktop(10)printer(3)router(12)server(6)switch(11)unknown(1)Supported smart port types.