MIB Browser

CISCO-TC-NO-U32

ciscoSystems
This module defines textual conventions used throughout
cisco enterprise mibs.
Organization
Cisco Systems, Inc.
Root OID
1.3.6.1.4.1.9.12.1
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m CISCO-TC-NO-U32 -Tp
snmpwalk -v2c -c <community> -m CISCO-TC-NO-U32 <host> 1.3.6.1.4.1.9.12.1

Imports

CISCO-SMIciscoModules, ciscoProducts
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
IciscoTextualConventions1.3.6.1.4.1.9.12.1

Textual conventions

CiscoIpProtocol INTEGER (0..255)
IP protocol number range.
CiscoNetworkAddress OCTET STRING

Display hint: 1x:

Represents a network layer address.  The length and format of
the address is protocol dependent as follows:
ip		4 octets
decnet		2 octets
pup		obsolete
chaos		2 octets
xns		10 octets
		first 4 octets are the net number
		last 6 octets are the host number
x121
appletalk	3 octets
		first 2 octets are the net number
		last octet is the host number
clns
lat
vines		6 octets
		first 4 octets are the net number
		last 2 octets are the host number
cons
apollo		10 octets
		first 4 octets are the net number
		last 6 octets are the host number
stun 		8 octets
novell		10 octets
		first 4 octets are the net number
		last 6 octets are the host number
qllc		6 octets
bstun		1 octet - bi-sync serial tunnel
snapshot	1 octet
atmIlmi		4 octets
x25 pvc		2 octets (12 bits)
CiscoNetworkProtocol INTEGER

apollo(12) appletalk(7) atmIlmi(17) bstun(18) chaos(4) clns(8) cons(11) decnet(2) ip(1) lat(9) novell(14) pup(3) qllc(15) snapshot(16) stun(13) unknown(65535) vines(10) x121(6) x25pvc(19) xns(5)

Represents the different types of network layer protocols.
CiscoPort INTEGER (0..65535)
The TCP or UDP port number range.
CiscoRowOperStatus INTEGER

active(1) activeDependencies(2) inactiveDependency(3) missingDependency(4)

Represents the operational status of an table entry.
This textual convention allows explicitly representing
the states of rows dependent on rows in other tables.

    active(1) -
        Indicates this entry's RowStatus is active
        and the RowStatus for each dependency is active.

    activeDependencies(2) -
        Indicates that the RowStatus for each dependency
        is active, but the entry's RowStatus is not active.

    inactiveDependency(3) -
        Indicates that the RowStatus for at least one
        dependency is not active.

    missingDependency(4) -
        Indicates that at least one dependency does
        not exist in it's table.
CountryCode OCTET STRING (SIZE (0 | 2))

Display hint: 2a

Represents a case-insensitive 2-letter country code taken from
ISO-3166. Unrecognized countries are represented as empty string.
EntPhysicalIndexOrZero Integer32 (0..2147483647)
This textual convention is an extension of entPhysicalIndex.
If non-zero, the object is an entPhysicalIndex. If zero, no
appropriate entPhysicalIndex exists. Any additional semantics
are object specific.
InterfaceIndexOrZero Integer32 (0..2147483647)

Display hint: d

Either the value 0, or the ifIndex value of an
interface in the ifTable.
SAPType Integer32 (0..254)

Display hint: 1x:

Service Access Point - is a term that denotes the means
by which a user entity in layer n+1 accesses a service
of a provider entity in layer n.