CISCO-SYSLOG-MIB
ciscoSystemsThe MIB module to describe and store the system messages generated by the IOS and any other OS which supports syslogs.
snmptranslate -m CISCO-SYSLOG-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-SYSLOG-MIB <host> 1.3.6.1.4.1.9.9.41Imports
| CISCO-SMI | ciscoMgmt |
|---|---|
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoSyslogMIB | 1.3.6.1.4.1.9.9.41 | ||||||||||||||||||||
identity The MIB module to describe and store the system messages generated by the IOS and any other OS which supports syslogs. | |||||||||||||||||||||
| NciscoSyslogMIBObjects | 1.3.6.1.4.1.9.9.41.1 | ||||||||||||||||||||
| NclogBasic | 1.3.6.1.4.1.9.9.41.1.1 | ||||||||||||||||||||
| SclogNotificationsSent | 1.3.6.1.4.1.9.9.41.1.1.1 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of clogMessageGenerated notifications that have been sent. This number may include notifications that were prevented from being transmitted due to reasons such as resource limitations and/or non-connectivity. If one is receiving notifications, one can periodically poll this object to determine if any notifications were missed. If so, a poll of the clogHistoryTable might be appropriate.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SclogNotificationsEnabled | 1.3.6.1.4.1.9.9.41.1.1.2 | TruthValue | RW | 2 | |||||||||||||||||
scalar · TruthValue · read-write · current Indicates whether clogMessageGenerated notifications will or will not be sent when a syslog message is generated by the device. Disabling notifications does not prevent syslog messages from being added to the clogHistoryTable. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SclogMaxSeverity | 1.3.6.1.4.1.9.9.41.1.1.3 | SyslogSeverity | RW | 5 | |||||||||||||||||
scalar · SyslogSeverity · read-write · current Indicates which syslog severity levels will be processed. Any syslog message with a severity value greater than this value will be ignored by the agent. note: severity numeric values increase as their severity decreases, e.g. 'error' is more severe than 'debug'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SclogMsgIgnores | 1.3.6.1.4.1.9.9.41.1.1.4 | Counter32 | RO | 24 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of syslog messages which were ignored. A message will be ignored if it has a severity value greater than clogMaxSeverity.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SclogMsgDrops | 1.3.6.1.4.1.9.9.41.1.1.5 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of syslog messages which could not be processed due to lack of system resources. Most likely this will occur at the same time that syslog messages are generated to indicate this lack of resources. Increases in this object's value may serve as an indication that system resource levels should be examined via other mib objects. A message that is dropped will not appear in the history table and no notification will be sent for this message.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SclogOriginIDType | 1.3.6.1.4.1.9.9.41.1.1.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current This object identifies the type of value that
will be contained in clogOriginID object.
The possible value(s) are:
'none' : do not send origin identifier in
syslog messages.
'other' : type that is not identified by other
values specified in this object.
'hostName' : Send hostname of the system in syslog
messages.
'ipv4Address': Send IP address of the sending interface.
'contextName': Send context name of the security device.
'userDefined': Send user configured string in
syslog message.
The value 'other' and 'none' can not be set but
can only be read.
| |||||||||||||||||||||
| SclogOriginID | 1.3.6.1.4.1.9.9.41.1.1.7 | SnmpAdminString | RW | ||||||||||||||||||
scalar · SnmpAdminString · read-write · current This object is used for configuring the origin identifier for the syslog messages. The origin identifier is useful for identifying the source of system logging messages in cases syslog messages from multiple devices are sent to a single syslog host. The origin identifier is added to the beginning of all system logging (syslog) messages sent to remote hosts. The type of the identifier is specified by clogOriginIDType object. This object can be written by the SNMP manager only when clogOriginIDType is set to 'userDefined'. For following value(s) of clogOriginIDType, this object can not be set; the value of this object is derived by the system in these cases: 'contextName' 'ipv4Address' 'hostName' 'other' 'none' This object contains the context name of the device, when clogOriginIDType is set to 'contextName'. This object contains IPv4 address (in dotted decimal notation) of the sending interface when clogOriginIDType is set to 'ipv4Address'. This object contains hostname of the system when clogOriginIDType is set to 'hostName'. This object will contain zero length octet string when clogOriginIDType is either 'none' or 'other'. | |||||||||||||||||||||
| NclogHistory | 1.3.6.1.4.1.9.9.41.1.2 | ||||||||||||||||||||
| SclogHistTableMaxLength | 1.3.6.1.4.1.9.9.41.1.2.1 | Integer32 (0..500) | RW | 1 | |||||||||||||||||
scalar · Integer32 (0..500) · read-write · current The upper limit on the number of entries that the clogHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and a new one will be created.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SclogHistMsgsFlushed | 1.3.6.1.4.1.9.9.41.1.2.2 | Counter32 | RO | 699 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of entries that have been removed from the clogHistoryTable in order to make room for new entries. This object can be utilized to determine whether your polling frequency on the history table is fast enough and/or the size of your history table is large enough such that you are not missing messages.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TclogHistoryTable | 1.3.6.1.4.1.9.9.41.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of syslog messages generated by this device. All 'interesting' syslog messages (i.e. severity <= clogMaxSeverity) are entered into this table. | |||||||||||||||||||||
| RclogHistoryEntry | 1.3.6.1.4.1.9.9.41.1.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current A syslog message that was previously generated by this device. Each entry is indexed by a message index.
| |||||||||||||||||||||
| CclogHistIndex | 1.3.6.1.4.1.9.9.41.1.2.3.1.1 | Integer32 (1..2147483647) | NA | ||||||||||||||||||
column · Integer32 (1..2147483647) · not-accessible · current A monotonically increasing integer for the sole purpose of indexing messages. When it reaches the maximum value the agent flushes the table and wraps the value back to 1. | |||||||||||||||||||||
| CclogHistFacility | 1.3.6.1.4.1.9.9.41.1.2.3.1.2 | DisplayString (SIZE (1..20)) | RO | SISF | |||||||||||||||||
column · DisplayString (SIZE (1..20)) · read-only · current Name of the facility that generated this message. For example: 'SYS'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CclogHistSeverity | 1.3.6.1.4.1.9.9.41.1.2.3.1.3 | SyslogSeverity | RO | 5 | |||||||||||||||||
column · SyslogSeverity · read-only · current The severity of the message. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CclogHistMsgName | 1.3.6.1.4.1.9.9.41.1.2.3.1.4 | DisplayString (SIZE (1..30)) | RO | EXCESS_ARP_ACTIVITY | |||||||||||||||||
column · DisplayString (SIZE (1..30)) · read-only · current A textual identification for the message type. A facility name in conjunction with a message name uniquely identifies a message type. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CclogHistMsgText | 1.3.6.1.4.1.9.9.41.1.2.3.1.5 | DisplayString (SIZE (1..255)) | RO | Chassis 1 R0/0: wncd: Excessive ARP activity de… | |||||||||||||||||
column · DisplayString (SIZE (1..255)) · read-only · current The text of the message. If the text of the message exceeds 255 bytes, the message will be truncated to 254 bytes and a '*' character will be appended - indicating that the message has been truncated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CclogHistTimestamp | 1.3.6.1.4.1.9.9.41.1.2.3.1.6 | TimeStamp | RO | 435038438 (50d 8h 26m 24s) | |||||||||||||||||
column · TimeStamp · read-only · current The value of sysUpTime when this message was generated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NclogServer | 1.3.6.1.4.1.9.9.41.1.3 | ||||||||||||||||||||
| SclogMaxServers | 1.3.6.1.4.1.9.9.41.1.3.1 | Unsigned32 | RO | ||||||||||||||||||
scalar · Unsigned32 · read-only · current The maximum number of syslog servers that can be configured for the system in clogServerConfigTable. A value of zero for this object indicates there is no specified limit for the system and is only dictated by system resources. | |||||||||||||||||||||
| TclogServerConfigTable | 1.3.6.1.4.1.9.9.41.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains entries that allow application to configure syslog servers for the system. The maximum number of entries that can be created for this table is limited by the object clogMaxServers. | |||||||||||||||||||||
| RclogServerConfigEntry | 1.3.6.1.4.1.9.9.41.1.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing information about syslog servers configured for the system. | |||||||||||||||||||||
| CclogServerAddrType | 1.3.6.1.4.1.9.9.41.1.3.2.1.1 | InetAddressType | NA | ||||||||||||||||||
column · InetAddressType · not-accessible · current The type of Internet address of this syslog server. | |||||||||||||||||||||
| CclogServerAddr | 1.3.6.1.4.1.9.9.41.1.3.2.1.2 | InetAddress (SIZE (0..64)) | NA | ||||||||||||||||||
column · InetAddress (SIZE (0..64)) · not-accessible · current The Internet address of this syslog server. The type of this address is determined by the value of the clogServerAddrType object. | |||||||||||||||||||||
| CclogServerStatus | 1.3.6.1.4.1.9.9.41.1.3.2.1.3 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current The status object used to manage rows in this table. A row may only be created by setting this object to 'createAndGo'. A row may only be deleted by setting this object to 'destroy'. | |||||||||||||||||||||
| NciscoSyslogMIBNotificationPrefix | 1.3.6.1.4.1.9.9.41.2 | ||||||||||||||||||||
| NciscoSyslogMIBNotifications | 1.3.6.1.4.1.9.9.41.2.0 | ||||||||||||||||||||
| !clogMessageGenerated | 1.3.6.1.4.1.9.9.41.2.0.1 | ||||||||||||||||||||
notification · current When a syslog message is generated by the device a clogMessageGenerated notification is sent. The sending of these notifications can be enabled/disabled via the clogNotificationsEnabled object. | |||||||||||||||||||||
| NciscoSyslogMIBConformance | 1.3.6.1.4.1.9.9.41.3 | ||||||||||||||||||||
| NciscoSyslogMIBCompliances | 1.3.6.1.4.1.9.9.41.3.1 | ||||||||||||||||||||
| MciscoSyslogMIBCompliance | 1.3.6.1.4.1.9.9.41.3.1.1 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for entities which implement the Cisco syslog MIB.
| |||||||||||||||||||||
| MciscoSyslogMIBComplianceRev1 | 1.3.6.1.4.1.9.9.41.3.1.2 | ||||||||||||||||||||
compliance · current The compliance statement for entities which implement the Cisco syslog MIB. | |||||||||||||||||||||
| NciscoSyslogMIBGroups | 1.3.6.1.4.1.9.9.41.3.2 | ||||||||||||||||||||
| GciscoSyslogMIBGroup | 1.3.6.1.4.1.9.9.41.3.2.1 | ||||||||||||||||||||
group · current A collection of objects providing the syslog MIB capability. | |||||||||||||||||||||
| GclogNotificationsGroup | 1.3.6.1.4.1.9.9.41.3.2.2 | ||||||||||||||||||||
| GclogServerGroup | 1.3.6.1.4.1.9.9.41.3.2.3 | ||||||||||||||||||||
group · current A collection of objects providing syslog server information for the system.
| |||||||||||||||||||||
| GclogOriginIDGroup | 1.3.6.1.4.1.9.9.41.3.2.4 | ||||||||||||||||||||
group · current A collection of objects providing information on origin of syslog messages.
| |||||||||||||||||||||
Textual conventions
SyslogSeverityINTEGERalert(2)critical(3)debug(8)emergency(1)error(4)info(7)notice(6)warning(5)The severity of a syslog message. The enumeration values are equal to the values that syslog uses + 1. For example, with syslog, emergency=0. 'emergency' : system is unusable 'alert' : action must be taken immediately 'critical' : critical conditions 'error' : error conditions 'warning' : warning conditions 'notice' : normal but significant condition 'informational': informational messages 'debug' : debug-level messages.
Traps / Notifications
- clogMessageGenerated
1.3.6.1.4.1.9.9.41.2.0.1