CISCO-STACKWISE-MIB
ciscoSystemsThis MIB module contain a collection of managed objects
that apply to network devices supporting the Cisco
StackWise(TM) technology.
The StackWise technology provides a method for collectively
utilizing a stack of switches to create a single switching
unit.
The data stack is used for switching data packets and, in
power stack, switches are connected by special stack power
cables to share power. Moreover, stackwise is the concept
for combining multiple systems to give an impression of a
single system so that is why both power stack and data stack
are supported by single MIB.
Terminology:
Stack - A collection of switches connected by the
Cisco StackWise technology.
Master - The switch that is managing the stack.
Member - A switch in the stack that is
NOT the stack master.
Ring - Components that makes up the connections
between the switches in order to create a
stack.
Stackport - A special physical connector used by the ring.
It is possible for a switch have more than
one stackport.
SDM - Switch Database Management.
Stack Power - A collection of switches connected by special
stack power cables to share the power of
inter-connected power supplies across all switches
requiring power. Stack Power is managed by a
single data stack.
Jack-Jack - It is a device that provides the Power Shelf
capabilities required for Stack Power on
the high-end.
POE - Power Over Ethernet
FEP - Front End Power Supply
SOC - Sustained Overload Condition
GLS - Graceful Load Shedding
ILS - Immediate Load Shedding
SRLS - System Ring Load Shedding
SSLS - System Star Load Sheddingsnmptranslate -m CISCO-STACKWISE-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-STACKWISE-MIB <host> 1.3.6.1.4.1.9.9.500Imports
| CISCO-SMI | ciscoMgmt |
|---|---|
| CISCO-TC | EntPhysicalIndexOrZero |
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IciscoStackWiseMIB | 1.3.6.1.4.1.9.9.500 | ||||||||||||||||||||
identity This MIB module contain a collection of managed objects
that apply to network devices supporting the Cisco
StackWise(TM) technology.
The StackWise technology provides a method for collectively
utilizing a stack of switches to create a single switching
unit.
The data stack is used for switching data packets and, in
power stack, switches are connected by special stack power
cables to share power. Moreover, stackwise is the concept
for combining multiple systems to give an impression of a
single system so that is why both power stack and data stack
are supported by single MIB.
Terminology:
Stack - A collection of switches connected by the
Cisco StackWise technology.
Master - The switch that is managing the stack.
Member - A switch in the stack that is
NOT the stack master.
Ring - Components that makes up the connections
between the switches in order to create a
stack.
Stackport - A special physical connector used by the ring.
It is possible for a switch have more than
one stackport.
SDM - Switch Database Management.
Stack Power - A collection of switches connected by special
stack power cables to share the power of
inter-connected power supplies across all switches
requiring power. Stack Power is managed by a
single data stack.
Jack-Jack - It is a device that provides the Power Shelf
capabilities required for Stack Power on
the high-end.
POE - Power Over Ethernet
FEP - Front End Power Supply
SOC - Sustained Overload Condition
GLS - Graceful Load Shedding
ILS - Immediate Load Shedding
SRLS - System Ring Load Shedding
SSLS - System Star Load Shedding | |||||||||||||||||||||
| NciscoStackWiseMIBNotifs | 1.3.6.1.4.1.9.9.500.0 | ||||||||||||||||||||
| NcswMIBNotifications | 1.3.6.1.4.1.9.9.500.0.0 | ||||||||||||||||||||
| !cswStackPortChange | 1.3.6.1.4.1.9.9.500.0.0.1 | ||||||||||||||||||||
notification · current This notification is generated when the state of a stack port has changed. | |||||||||||||||||||||
| !cswStackNewMaster | 1.3.6.1.4.1.9.9.500.0.0.2 | ||||||||||||||||||||
notification · current This notification is generated when a new master has been elected. The notification will contain the cswSwitchNumCurrent object to indicate the new master ID.
| |||||||||||||||||||||
| !cswStackMismatch | 1.3.6.1.4.1.9.9.500.0.0.3 | ||||||||||||||||||||
notification · current This notification is generated when a new member attempt to join the stack but was denied due to a mismatch. The cswSwitchState object will indicate the type of mismatch.
| |||||||||||||||||||||
| !cswStackRingRedundant | 1.3.6.1.4.1.9.9.500.0.0.4 | ||||||||||||||||||||
notification · current This notification is generated when the redundancy of the ring has changed.
| |||||||||||||||||||||
| !cswStackNewMember | 1.3.6.1.4.1.9.9.500.0.0.5 | ||||||||||||||||||||
notification · current This notification is generated when a new member joins the stack.
| |||||||||||||||||||||
| !cswStackMemberRemoved | 1.3.6.1.4.1.9.9.500.0.0.6 | ||||||||||||||||||||
notification · current This notification is generated when a member is removed from the stack.
| |||||||||||||||||||||
| !cswStackPowerPortLinkStatusChanged | 1.3.6.1.4.1.9.9.500.0.0.7 | ||||||||||||||||||||
notification · current This notification is generated when the link status of a stack power port is changed from up to down or down to up. This notification is for informational purposes only and no action is required. cswStackPowerPortLinkStatus indicates link status of the stack power ports. cswSwitchNumCurrent indicates the switch number of the system. cswStackPowerPortName specifies a unique name of the stack power port as shown on the face plate of the system. | |||||||||||||||||||||
| !cswStackPowerPortOperStatusChanged | 1.3.6.1.4.1.9.9.500.0.0.8 | ||||||||||||||||||||
notification · current This notification is generated when the operational status of a stack power port is changed from enabled to disabled or from disabled to enabled. This notification is for informational purposes only and no action is required. cswSwitchNumCurrent indicates the switch number of the system. cswStackPowerPortOperStatus indicates operational status of the stack power ports. cswStackPowerPortName specifies a unique name of the stack power port as shown on the face plate of the system. | |||||||||||||||||||||
| !cswStackPowerVersionMismatch | 1.3.6.1.4.1.9.9.500.0.0.9 | ||||||||||||||||||||
notification · current This notification is generated when the major version of the stack power protocol is different from the other members of the power stack. Upon receiving this notification, the user should make sure that he/she is using the same software version on all the members of the same power stack. cswSwitchNumCurrent indicates the switch number of the system seeing the power stack version mismatch.
| |||||||||||||||||||||
| !cswStackPowerInvalidTopology | 1.3.6.1.4.1.9.9.500.0.0.10 | ||||||||||||||||||||
notification · current This notification is generated when an invalid stack power topology is discovered by a switch. cswSwitchNumCurrent indicates the switch number of the system where the invalid topology is discovered.
| |||||||||||||||||||||
| !cscwStackPowerBudgetWarrning | 1.3.6.1.4.1.9.9.500.0.0.11 | ||||||||||||||||||||
notification · current This notification is generated when the switch power budget is more than 1000W above its power supplies rated power output. cswSwitchNumCurrent indicates the switch number of the system where the invalid power budget has been detected.
| |||||||||||||||||||||
| !cswStackPowerInvalidInputCurrent | 1.3.6.1.4.1.9.9.500.0.0.12 | ||||||||||||||||||||
notification · current This notification is generated when the input current in the stack power cable is over the limit of the threshold retrieved by the agent through cswStackPowerPortOverCurrentThreshold object. Upon receiving this notification, the user should add a power supply to the system whose switch number is generated with this notification. cswSwitchNumCurrent indicates the switch number of the system. cswStackPowerPortOverCurrentThreshold indicates the over current threshold of power stack cables. cswStackPowerPortName specifies a unique name of the stack power port as shown on the face plate of the system. | |||||||||||||||||||||
| !cswStackPowerInvalidOutputCurrent | 1.3.6.1.4.1.9.9.500.0.0.13 | ||||||||||||||||||||
notification · current This notification is generated when the output current in the stack power cable is over the limit of the threshold retrieved by the agent through cswStackPowerPortOverCurrentThreshold object. Upon receiving this notification, the user should remove a power supply from the system whose switch number is generated with this notification. cswSwitchNumCurrent indicates the switch number of the system. cswStackPowerPortOverCurrentThreshold indicates the over current threshold of power stack cables. cswStackPowerPortName specifies a unique name of the stack power port as shown on the face plate of the system. | |||||||||||||||||||||
| !cswStackPowerUnderBudget | 1.3.6.1.4.1.9.9.500.0.0.14 | ||||||||||||||||||||
notification · current This notification is generated when the switch's budget is less than maximum possible switch power consumption. cswSwitchNumCurrent indicates the switch number of the system that is running with the power budget less than the power consumption.
| |||||||||||||||||||||
| !cswStackPowerUnbalancedPowerSupplies | 1.3.6.1.4.1.9.9.500.0.0.15 | ||||||||||||||||||||
notification · current This notification is generated when the switch has no power supply but another switch in the same stack has more than one power supplies. cswStackPowerName specifies a unique name of the power stack where the unbalanced power supplies are detected.
| |||||||||||||||||||||
| !cswStackPowerInsufficientPower | 1.3.6.1.4.1.9.9.500.0.0.16 | ||||||||||||||||||||
notification · current This notification is generated when the switch's power stack does not have enough power to bring up all the switches in the power stack. cswStackPowerName specifies a unique name of the power stack where insufficient power condition is detected.
| |||||||||||||||||||||
| !cswStackPowerPriorityConflict | 1.3.6.1.4.1.9.9.500.0.0.17 | ||||||||||||||||||||
notification · current This notification is generated when the switch's power priorities are conflicting with power priorities of another switch in the same power stack. cswStackPowerPortName specifies the unique name of the power stack where the conflicting power priorities are detected.
| |||||||||||||||||||||
| !cswStackPowerUnderVoltage | 1.3.6.1.4.1.9.9.500.0.0.18 | ||||||||||||||||||||
notification · current This notification is generated when the switch had an under voltage condition on last boot up. cswSwitchNumCurrent indicates the switch number of the system that was forced down with the under voltage condition.
| |||||||||||||||||||||
| !cswStackPowerGLS | 1.3.6.1.4.1.9.9.500.0.0.19 | ||||||||||||||||||||
notification · current This notification is generated when the switch had to shed loads based on a sustained over load (SOC) condition. cswSwitchNumCurrent indicates the switch number of the system that goes through graceful load shedding.
| |||||||||||||||||||||
| !cswStackPowerILS | 1.3.6.1.4.1.9.9.500.0.0.20 | ||||||||||||||||||||
notification · current This notification is generated when the switch had to shed loads based on power supply fail condition. cswSwitchNumCurrent indicates the switch number of the system that goes through immediate load shedding.
| |||||||||||||||||||||
| !cswStackPowerSRLS | 1.3.6.1.4.1.9.9.500.0.0.21 | ||||||||||||||||||||
notification · current This notification is generated when the switch had to shed loads based on loss of a system in ring topology. cswSwitchNumCurrent indicates the switch number of the system that detects the loss of system in ring topology.
| |||||||||||||||||||||
| !cswStackPowerSSLS | 1.3.6.1.4.1.9.9.500.0.0.22 | ||||||||||||||||||||
notification · current This notification is generated when the switch had to shed loads based on loss of a system in star topology. cswSwitchNumCurrent indicates the switch number of the system that detects the loss of system in star topology.
| |||||||||||||||||||||
| !cswStackMemberToBeReloadedForUpgrade | 1.3.6.1.4.1.9.9.500.0.0.23 | ||||||||||||||||||||
notification · current This notification is generated when a member is to be reloaded for upgrade.
| |||||||||||||||||||||
| NciscoStackWiseMIBObjects | 1.3.6.1.4.1.9.9.500.1 | ||||||||||||||||||||
| NcswGlobals | 1.3.6.1.4.1.9.9.500.1.1 | ||||||||||||||||||||
| ScswMaxSwitchNum | 1.3.6.1.4.1.9.9.500.1.1.1 | CswSwitchNumber | RO | 8 | |||||||||||||||||
scalar · CswSwitchNumber · read-only · current The maximum number of switches that can be configured on this stack. This is also the maximum value that can be set by the cswSwitchNumNextReload object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswMaxSwitchConfigPriority | 1.3.6.1.4.1.9.9.500.1.1.2 | CswSwitchPriority | RO | 15 | |||||||||||||||||
scalar · CswSwitchPriority · read-only · current The maximum configurable priority for a switch in this stack. Highest value equals highest priority. This is the highest value that can be set by the cswSwitchSwPriority object. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswRingRedundant | 1.3.6.1.4.1.9.9.500.1.1.3 | TruthValue | RO | 1 | |||||||||||||||||
scalar · TruthValue · read-only · current A value of 'true' is returned when the stackports are connected in such a way that it forms a redundant ring. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswEnableStackNotifications | 1.3.6.1.4.1.9.9.500.1.1.4 | TruthValue | RW | deprecated | 2 | ||||||||||||||||
scalar · TruthValue · read-write · deprecated This object indicates whether the system generates the notifications defined in this MIB or not. A value of 'false' will prevent the notifications from being sent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswEnableIndividualStackNotifications | 1.3.6.1.4.1.9.9.500.1.1.5 | Bits | RW | 00 00 00 00 | |||||||||||||||||
scalar · Bits · read-write · current This object is used to enable/disable individual notifications
defined in this MIB module. Turning on a particular bit would
enable the corresponding trap and, similarly, turning off a
particular bit would disable the corresponding trap. The
following notifications are controlled by this object:
stackPortChange(0): enables/disables cswStackPortChange
notification.
stackNewMaster(1): enables/disables cswStackNewMember
notification.
stackMismatch(2): enables/disables cswStackMismatch
notification.
stackRingRedundant(3): enables/disables cswStackRingRedundant
notification.
stackNewMember(4): enables/disables cswStackNewMember
notification.
stackMemberRemoved(5): enables/disables cswStackMemberRemoved
notification.
stackPowerLinkStatusChanged(6): enables/disables
cswStackPowerPortLinkStatusChanged notification.
stackPowerPortOperStatusChanged(7): enables/disables
cswStackPowerPortOperStatusChanged notification.
stackPowerVersionMismatch(8): enables/disables
cswStackPowerVersionMismatch notification.
stackPowerInvalidTopology(9): enables/disables
cswStackPowerInvalidTopology notification
stackPowerBudgetWarning(10): enables/disables
cswStackPowerBudgetWarning notification.
stackPowerInvalidInputCurrent(11): enables/disables
cswStackPowerInvalidInputCurrent notification.
stackPowerInvalidOutputCurrent(12): enables/disables
cswStackPowerInvalidOutputCurrent notification.
stackPowerUnderBudget(13): enables/disables
cswStackPowerUnderBudget notification.
stackPowerUnbalancedPowerSupplies(14): enables/disables
cswStackPowerUnbalancedPowerSupplies notification.
stackPowerInsufficientPower(15): enables/disables
cswStackPowerInsufficientPower notification.
stackPowerPriorityConflict(16): enables/disables
cswStackPowerPriorityConflict notification.
stackPowerUnderVoltage(17): enables/disables
cswStackPowerUnderVoltage notification.
stackPowerGLS(18): enables/disables cswStackPowerGLS
notification.
stackPowerILS(19): enables/disabled cswStackPowerILS
notification.
stackPowerSRLS(20): enables/disables cswStackPowerSRLS
notification.
stackPowerSSLS(21): enables/disables cswStackPowerSSLS
notification.
stackMemberToBeReloadedForUpgrade(22): enables/disables
cswStackMemberToBeReloadedForUpgrade notification.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswStackDomainNum | 1.3.6.1.4.1.9.9.500.1.1.6 | Unsigned32 | RO | 0 | |||||||||||||||||
scalar · Unsigned32 · read-only · current This object indicates distributed domain of the switch.Only Switches with the same domain number can be in the same dist ributed domain.0 means no switch domain configured. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswStackType | 1.3.6.1.4.1.9.9.500.1.1.7 | Unsigned32 | RO | 0 | |||||||||||||||||
scalar · Unsigned32 · read-only · current This object indicates type of switch stack. value of Switch virtual domain determines if switch is distributed or conventional stack. 0 means stack is conventional back side stack. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ScswStackBandWidth | 1.3.6.1.4.1.9.9.500.1.1.8 | Unsigned32 | RO | 480 | |||||||||||||||||
scalar · Unsigned32 · read-only · current This object indicates stack bandwidth. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NcswStackInfo | 1.3.6.1.4.1.9.9.500.1.2 | ||||||||||||||||||||
| TcswSwitchInfoTable | 1.3.6.1.4.1.9.9.500.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information specific to switches in a stack. Every switch with an entry in the entPhysicalTable (ENTITY-MIB) whose entPhysicalClass is 'chassis' will have an entry in this table. | |||||||||||||||||||||
| RcswSwitchInfoEntry | 1.3.6.1.4.1.9.9.500.1.2.1.1 | NA | |||||||||||||||||||
row · not-accessible · current A conceptual row in the cswSwitchInfoTable describing a switch information.
| |||||||||||||||||||||
| CcswSwitchNumCurrent | 1.3.6.1.4.1.9.9.500.1.2.1.1.1 | CswSwitchNumber | RO | ||||||||||||||||||
column · CswSwitchNumber · read-only · current This object contains the current switch identification number. This number should match any logical labeling on the switch. For example, a switch whose interfaces are labeled 'interface #3' this value should be 3. | |||||||||||||||||||||
| CcswSwitchNumNextReload | 1.3.6.1.4.1.9.9.500.1.2.1.1.2 | CswSwitchNumberOrZero | RW | ||||||||||||||||||
column · CswSwitchNumberOrZero · read-write · current This object contains the cswSwitchNumCurrent to be used at next reload. The maximum value for this object is defined by the cswMaxSwitchNum object. Note: This object will contain 0 and cannot be set if the cswSwitchState value is other than 'ready'. | |||||||||||||||||||||
| CcswSwitchRole | 1.3.6.1.4.1.9.9.500.1.2.1.1.3 | INTEGER | RO | master(1) | |||||||||||||||||
column · INTEGER · read-only · current This object describes the function of the switch:
master - stack master.
member - active member of the stack.
notMember - none-active stack member, see
cswSwitchState for status.
standby - stack standby switch.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcswSwitchSwPriority | 1.3.6.1.4.1.9.9.500.1.2.1.1.4 | CswSwitchPriority | RW | ||||||||||||||||||
column · CswSwitchPriority · read-write · current A number containing the priority of a switch. The switch with the highest priority will become the master. The maximum value for this object is defined by the cswMaxSwitchConfigPriority object. If after a reload the value of cswMaxSwitchConfigPriority changes to a smaller value, and the value of cswSwitchSwPriority has been previously set to a value greater or equal to the new cswMaxSwitchConfigPriority, then the SNMP agent must set cswSwitchSwPriority to the new cswMaxSwitchConfigPriority. Note: This object will contain the value of 0 if the cswSwitchState value is other than 'ready'. | |||||||||||||||||||||
| CcswSwitchHwPriority | 1.3.6.1.4.1.9.9.500.1.2.1.1.5 | CswSwitchPriority | RO | ||||||||||||||||||
column · CswSwitchPriority · read-only · current This object contains the hardware priority of a switch. If two or more entries in this table have the same cswSwitchSwPriority value during the master election time, the switch with the highest cswSwitchHwPriority will become the master. Note: This object will contain the value of 0 if the cswSwitchState value is other than 'ready'. | |||||||||||||||||||||
| CcswSwitchState | 1.3.6.1.4.1.9.9.500.1.2.1.1.6 | INTEGER | RO | ready(4) | |||||||||||||||||
column · INTEGER · read-only · current The current state of a switch:
waiting - Waiting for a limited time on other
switches in the stack to come online.
progressing - Master election or mismatch checks in
progress.
added - The switch is added to the stack.
ready - The switch is operational.
sdmMismatch - The SDM template configured on the master
is not supported by the new member.
verMismatch - The operating system version running on the
master is different from the operating
system version running on this member.
featureMismatch - Some of the features configured on the
master are not supported on this member.
newMasterInit - Waiting for the new master to finish
initialization after master switchover
(Master Re-Init).
provisioned - The switch is not an active member of the
stack.
invalid - The switch's state machine is in an
invalid state.
removed - The switch is removed from the stack.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcswSwitchMacAddress | 1.3.6.1.4.1.9.9.500.1.2.1.1.7 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current The MAC address of the switch. Note: This object will contain the value of 0000:0000:0000 if the cswSwitchState value is other than 'ready'. | |||||||||||||||||||||
| CcswSwitchSoftwareImage | 1.3.6.1.4.1.9.9.500.1.2.1.1.8 | SnmpAdminString | RO | ||||||||||||||||||
column · SnmpAdminString · read-only · current The software image type running on the switch. Note: This object will contain an empty string if the cswSwitchState value is other than 'ready'. | |||||||||||||||||||||
| CcswSwitchPowerBudget | 1.3.6.1.4.1.9.9.500.1.2.1.1.9 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This object indicates the power budget of the switch.
| |||||||||||||||||||||
| CcswSwitchPowerCommited | 1.3.6.1.4.1.9.9.500.1.2.1.1.10 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This object indicates the power committed to the POE devices connected to the switch.
| |||||||||||||||||||||
| CcswSwitchSystemPowerPriority | 1.3.6.1.4.1.9.9.500.1.2.1.1.11 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This specifies the system's power priority. In case of a power failure then the system with the highest system priority will be brought down last. | |||||||||||||||||||||
| CcswSwitchPoeDevicesLowPriority | 1.3.6.1.4.1.9.9.500.1.2.1.1.12 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies the priority of the system's low priority POE devices. | |||||||||||||||||||||
| CcswSwitchPoeDevicesHighPriority | 1.3.6.1.4.1.9.9.500.1.2.1.1.13 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object specifies the priority of the system's high priority POE devices. In order to avoid losing the high priority POE devices before the low priority POE devices, this object's value must be greater than value of cswSwitchPoeDevicesLowPriority. | |||||||||||||||||||||
| CcswSwitchPowerAllocated | 1.3.6.1.4.1.9.9.500.1.2.1.1.14 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This object indicates the power committed to the POE devices connected to the switch.
| |||||||||||||||||||||
| TcswStackPortInfoTable | 1.3.6.1.4.1.9.9.500.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains stackport specific information. There exists an entry in this table for every physical stack port that have an entry in the ifTable (IF-MIB). | |||||||||||||||||||||
| RcswStackPortInfoEntry | 1.3.6.1.4.1.9.9.500.1.2.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A conceptual row in the cswStackPortInfoTable. An entry contains information about a stackport.
| |||||||||||||||||||||
| CcswStackPortOperStatus | 1.3.6.1.4.1.9.9.500.1.2.2.1.1 | INTEGER | RO | up(1) | |||||||||||||||||
column · INTEGER · read-only · current The state of the stackport.
up - Connected and operational.
down - Not connected to a neighboring switch or
administrative down.
forcedDown - Shut down by stack manager due to mismatch or
stackport errors.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CcswStackPortNeighbor | 1.3.6.1.4.1.9.9.500.1.2.2.1.2 | EntPhysicalIndexOrZero | RO | ||||||||||||||||||
column · EntPhysicalIndexOrZero · read-only · current This object contains the value of the entPhysicalIndex of the switch's chassis to which this stackport is connected to. If the stackport is not connected, the value 0 is returned. | |||||||||||||||||||||
| TcswDistrStackLinkInfoTable | 1.3.6.1.4.1.9.9.500.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current Distributed Stack Link Information. | |||||||||||||||||||||
| RcswDistrStackLinkInfoEntry | 1.3.6.1.4.1.9.9.500.1.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An Entry containing information about DSL link.
| |||||||||||||||||||||
| CcswDSLindex | 1.3.6.1.4.1.9.9.500.1.2.3.1.1 | Unsigned32 (1..2) | NA | ||||||||||||||||||
column · Unsigned32 (1..2) · not-accessible · current This is index of the distributed stack link with respect to each interface port | |||||||||||||||||||||
| CcswDistrStackLinkBundleOperStatus | 1.3.6.1.4.1.9.9.500.1.2.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The state of the stackLink. up - Connected and operational. down - Not connected or administrative down.
| |||||||||||||||||||||
| TcswDistrStackPhyPortInfoTable | 1.3.6.1.4.1.9.9.500.1.2.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains objects for Distributed stack Link information Table. | |||||||||||||||||||||
| RcswDistrStackPhyPortInfoEntry | 1.3.6.1.4.1.9.9.500.1.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An Entry containing information about stack port that is part of Distributed Stack Link.
| |||||||||||||||||||||
| CcswDistrStackPhyPort | 1.3.6.1.4.1.9.9.500.1.2.4.1.1 | SnmpAdminString | RO | ||||||||||||||||||
column · SnmpAdminString · read-only · current This object indicates the name of distributed stack port. | |||||||||||||||||||||
| CcswDistrStackPhyPortOperStatus | 1.3.6.1.4.1.9.9.500.1.2.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The state of the distributed stackport.
up - Connected and operational.
down - Not connected to a neighboring switch or
administrative down.
| |||||||||||||||||||||
| CcswDistrStackPhyPortNbr | 1.3.6.1.4.1.9.9.500.1.2.4.1.3 | SnmpAdminString | RO | ||||||||||||||||||
column · SnmpAdminString · read-only · current This object indicates the name of distributed stack port's neighbor. | |||||||||||||||||||||
| CcswDistrStackPhyPortNbrsw | 1.3.6.1.4.1.9.9.500.1.2.4.1.4 | EntPhysicalIndexOrZero | RO | ||||||||||||||||||
column · EntPhysicalIndexOrZero · read-only · current This object indicates the EntPhysicalIndex of the distributed stack port's neigbor switch. | |||||||||||||||||||||
| NcswStackPowerInfo | 1.3.6.1.4.1.9.9.500.1.3 | ||||||||||||||||||||
| TcswStackPowerInfoTable | 1.3.6.1.4.1.9.9.500.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current This table holds the information about all the power stacks in a single data stack. | |||||||||||||||||||||
| RcswStackPowerInfoEntry | 1.3.6.1.4.1.9.9.500.1.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the cswStackPowerInfoTable for each of the power stacks in a single data stack. This entry contains information regarding the power stack. | |||||||||||||||||||||
| CcswStackPowerStackNumber | 1.3.6.1.4.1.9.9.500.1.3.1.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current A unique value, greater than zero, to identify a power stack. | |||||||||||||||||||||
| CcswStackPowerMode | 1.3.6.1.4.1.9.9.500.1.3.1.1.2 | CswPowerStackMode | RW | ||||||||||||||||||
column · CswPowerStackMode · read-write · current This object specifies the information about the mode of the power stack. Power-sharing mode: All of the input power can be used for loads, and the total available power appears as one huge power supply. The power budget includes all power from all supplies. No power is set aside for power supply failures, so if a power supply fails, load shedding (shutting down of powered devices or switches) might occur. This is the default. Redundant mode: The largest power supply is removed from the power pool to be used as backup power in case one of the other power supplies fails. The available power budget is the total power minus the largest power supply. This reduces the available power in the pool for switches and powered devices to draw from, but in case of a failure or an extreme power load, there is less chance of having to shut down switches or powered devices. This is the recommended operating mode if your system has enough power. In addition, you can configure each mode to run a strict power budget or a non-strict (loose) power budget. If the mode is strict, the stack power needs cannot exceed the available power. When the power budgeted to devices reaches the maximum available PoE power, power is denied to the next device seeking power. In this mode the stack never goes into an over-budgeted power mode. When the mode is non-strict, budgeted power is allowed to exceed available power. This is normally not a problem because most devices do not run at full power and the chances of all powered devices in the stack requiring maximum power at the same time is small. | |||||||||||||||||||||
| CcswStackPowerMasterMacAddress | 1.3.6.1.4.1.9.9.500.1.3.1.1.3 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current This object indicates the Mac address of the power stack master. | |||||||||||||||||||||
| CcswStackPowerMasterSwitchNum | 1.3.6.1.4.1.9.9.500.1.3.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This object indicates the switch number of the power stack master. The value of this object would be zero if the power stack master is not part of this data stack. | |||||||||||||||||||||
| CcswStackPowerNumMembers | 1.3.6.1.4.1.9.9.500.1.3.1.1.5 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current This object indicates the number of members in the power stack. | |||||||||||||||||||||
| CcswStackPowerType | 1.3.6.1.4.1.9.9.500.1.3.1.1.6 | CswPowerStackType | RO | ||||||||||||||||||
column · CswPowerStackType · read-only · current This object indicates the topology of the power stack, that is, whether the switch is running in RING or STAR topology. | |||||||||||||||||||||
| CcswStackPowerName | 1.3.6.1.4.1.9.9.500.1.3.1.1.7 | SnmpAdminString | RW | ||||||||||||||||||
column · SnmpAdminString · read-write · current This object specifies a unique name of this power stack. A zero-length string indicates no name is assigned. | |||||||||||||||||||||
| TcswStackPowerPortInfoTable | 1.3.6.1.4.1.9.9.500.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains information about the stack power ports. There exists an entry in this table for each physical stack power port. | |||||||||||||||||||||
| RcswStackPowerPortInfoEntry | 1.3.6.1.4.1.9.9.500.1.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current A conceptual row in the cswStackPowerPortInfoTable. This entry contains information about a power stack port. | |||||||||||||||||||||
| CcswStackPowerPortIndex | 1.3.6.1.4.1.9.9.500.1.3.2.1.1 | Unsigned32 | NA | ||||||||||||||||||
column · Unsigned32 · not-accessible · current A unique value, greater than zero, for each stack power port. | |||||||||||||||||||||
| CcswStackPowerPortOperStatus | 1.3.6.1.4.1.9.9.500.1.3.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object is used to either set or unset the operational
status of the stack port. This object will have following valid
values,
enabled(1) : The port is enabled
disabled(2) : The port is forced down
| |||||||||||||||||||||
| CcswStackPowerPortNeighborMacAddress | 1.3.6.1.4.1.9.9.500.1.3.2.1.3 | MacAddress | RO | ||||||||||||||||||
column · MacAddress · read-only · current This objects indicates the port neighbor's Mac Address. | |||||||||||||||||||||
| CcswStackPowerPortNeighborSwitchNum | 1.3.6.1.4.1.9.9.500.1.3.2.1.4 | CswSwitchNumberOrZero | RO | ||||||||||||||||||
column · CswSwitchNumberOrZero · read-only · current This objects indicates the port neighbor's switch number. If either there is no switch connected or the neighbor is not Jack-Jack then the value of this object is going to be 0. | |||||||||||||||||||||
| CcswStackPowerPortLinkStatus | 1.3.6.1.4.1.9.9.500.1.3.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object is used to describe the link status of the stack
port. This object will have following valid
values,
up(1) : The port is connected and operational
down(2): The port is either forced down or not connected
| |||||||||||||||||||||
| CcswStackPowerPortOverCurrentThreshold | 1.3.6.1.4.1.9.9.500.1.3.2.1.6 | Unsigned32 | RW | ||||||||||||||||||
column · Unsigned32 · read-write · current This object is used to retrieve the over current threshold. The stack power cables are limited to carry current up to the limit retrieved by this object. The stack power cables would not be able to function properly if either the input or output current goes beyond the threshold retrieved by this object.
| |||||||||||||||||||||
| CcswStackPowerPortName | 1.3.6.1.4.1.9.9.500.1.3.2.1.7 | SnmpAdminString | RO | ||||||||||||||||||
column · SnmpAdminString · read-only · current This object specifies a unique name of the stack power port as shown on the face plate of the system. A zero-length string indicates no name is assigned. | |||||||||||||||||||||
| NciscoStackWiseMIBConform | 1.3.6.1.4.1.9.9.500.2 | ||||||||||||||||||||
| NcswStackWiseMIBCompliances | 1.3.6.1.4.1.9.9.500.2.1 | ||||||||||||||||||||
| McswStackWiseMIBCompliance | 1.3.6.1.4.1.9.9.500.2.1.1 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for entities that implement the CISCO-STACKWISE-MIB.
| |||||||||||||||||||||
| McswStackWiseMIBComplianceRev1 | 1.3.6.1.4.1.9.9.500.2.1.2 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statements for entities described in CISCO-STACKWISE-MIB. Stack Power entities are added in this revision. | |||||||||||||||||||||
| McswStackWiseMIBComplianceRev2 | 1.3.6.1.4.1.9.9.500.2.1.3 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statements for entities described in CISCO-STACKWISE-MIB. Stack Power entities are added in this revision. | |||||||||||||||||||||
| McswStackWiseMIBComplianceRev3 | 1.3.6.1.4.1.9.9.500.2.1.4 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statements for entities described in CISCO-STACKWISE-MIB. Stack Power entities are added in this revision. | |||||||||||||||||||||
| McswStackWiseMIBComplianceRev4 | 1.3.6.1.4.1.9.9.500.2.1.5 | ||||||||||||||||||||
compliance · current The compliance statements for entities described in CISCO-STACKWISE-MIB. Stack Global entities are added in this revision.
| |||||||||||||||||||||
| NcswStackWiseMIBGroups | 1.3.6.1.4.1.9.9.500.2.2 | ||||||||||||||||||||
| GcswStatusGroup | 1.3.6.1.4.1.9.9.500.2.2.1 | deprecated | |||||||||||||||||||
group · deprecated A collection of objects that are used for control and status.
| |||||||||||||||||||||
| GcswNotificationGroup | 1.3.6.1.4.1.9.9.500.2.2.2 | ||||||||||||||||||||
group · current A collection of notifications that are required. | |||||||||||||||||||||
| GcswStatusGroupRev1 | 1.3.6.1.4.1.9.9.500.2.2.3 | ||||||||||||||||||||
group · current A collection of objects that are used for control and status. | |||||||||||||||||||||
| GcswStackPowerStatusGroup | 1.3.6.1.4.1.9.9.500.2.2.4 | ||||||||||||||||||||
group · current A collection of stack power objects that are used for control and status of power stack. | |||||||||||||||||||||
| GcswStackPowerSwitchStatusGroup | 1.3.6.1.4.1.9.9.500.2.2.5 | ||||||||||||||||||||
group · current A collection of stack power objects that are used to track the stack power parameters of a switch. | |||||||||||||||||||||
| GcswStackPowerPortStatusGroup | 1.3.6.1.4.1.9.9.500.2.2.6 | ||||||||||||||||||||
group · current A collection of objects that are used for control and status of stack power ports. | |||||||||||||||||||||
| GcswStackPowerNotificationGroup | 1.3.6.1.4.1.9.9.500.2.2.7 | ||||||||||||||||||||
group · current A collection of notifications that are triggered whenever there is either a change in stack power object or an error is encountered.
| |||||||||||||||||||||
| GcswStackPowerEnableNotificationGroup | 1.3.6.1.4.1.9.9.500.2.2.8 | ||||||||||||||||||||
group · current This group contains the notification enable objects for this MIB. | |||||||||||||||||||||
| GcswNotificationGroupSup1 | 1.3.6.1.4.1.9.9.500.2.2.9 | ||||||||||||||||||||
group · current Additional notification required for data stack. | |||||||||||||||||||||
| GcswStackPowerAllocatedGroup | 1.3.6.1.4.1.9.9.500.2.2.10 | ||||||||||||||||||||
group · current A collection of objects providing the stack power allocation information of a switch.
| |||||||||||||||||||||
| GcswStatusGroupRev2 | 1.3.6.1.4.1.9.9.500.2.2.11 | ||||||||||||||||||||
group · current A collection of objects that are used for control and status. | |||||||||||||||||||||
| GcswDistrStackLinkStatusGroup | 1.3.6.1.4.1.9.9.500.2.2.12 | ||||||||||||||||||||
group · current A collection object(s) for control and status of the distributed Stack Link. | |||||||||||||||||||||
| GcswDistrStackPhyPortStatusGroup | 1.3.6.1.4.1.9.9.500.2.2.13 | ||||||||||||||||||||
group · current A collection of objects for control and status of the distributed stack port | |||||||||||||||||||||
Textual conventions
CswPowerStackModeINTEGERpowerSharing(1)powerSharingStrict(3)redundant(2)redundantStrict(4)This textual convention is used to describe the mode of the power stack. Since the power stack could only run in either power sharing or redundant mode so this TC will also have only following valid values, powerSharing(1) :When a power stack is running in power sharing mode then all the power supplies in the power stack contributes towards the global power budget of the stack. redundant(2) :If the user wants the power stack to run in redundant mode then we will take the capacity of the largest power supply in the power stack out of power stack global power budget pool. powerSharingStrict(3):This mode is same as power sharing mode but, in this mode, the available power will always be more than the used power. redundantStrict(4) :This mode is same as redundant mode but, in this mode, the available power will always be more than the used power.CswPowerStackTypeINTEGERring(1)star(2)This textual conventions is used to describe the type of the power stack. Since the power stack could only be configured in a ring or star topology so this TC will have only following valid values, ring(1): The power stack has been formed by connecting the switches in ring topology. star(2): The power stack has been formed by connecting the switches in star topology.CswSwitchNumberUnsigned32 (1..4294967295)Display hint:
dA unique value, greater than zero, for each switch in a group of stackable switches.
CswSwitchNumberOrZeroUnsigned32 (0..4294967295)Display hint:
dA unique value, greater than or equal to zero, for each switch in a group of stackable switches. A value of zero means that the switch number can not be determined. The value of zero is not unique.
CswSwitchPriorityUnsigned32 (0..4294967295)Display hint:
dA value, greater than or equal to zero, that defines the priority of a switch in a group of stackable switches. The higher the value, the higher the priority.
Traps / Notifications
- cscwStackPowerBudgetWarrning
1.3.6.1.4.1.9.9.500.0.0.11 - cswStackMemberRemoved
1.3.6.1.4.1.9.9.500.0.0.6 - cswStackMemberToBeReloadedForUpgrade
1.3.6.1.4.1.9.9.500.0.0.23 - cswStackMismatch
1.3.6.1.4.1.9.9.500.0.0.3 - cswStackNewMaster
1.3.6.1.4.1.9.9.500.0.0.2 - cswStackNewMember
1.3.6.1.4.1.9.9.500.0.0.5 - cswStackPortChange
1.3.6.1.4.1.9.9.500.0.0.1 - cswStackPowerGLS
1.3.6.1.4.1.9.9.500.0.0.19 - cswStackPowerILS
1.3.6.1.4.1.9.9.500.0.0.20 - cswStackPowerInsufficientPower
1.3.6.1.4.1.9.9.500.0.0.16 - cswStackPowerInvalidInputCurrent
1.3.6.1.4.1.9.9.500.0.0.12 - cswStackPowerInvalidOutputCurrent
1.3.6.1.4.1.9.9.500.0.0.13 - cswStackPowerInvalidTopology
1.3.6.1.4.1.9.9.500.0.0.10 - cswStackPowerPortLinkStatusChanged
1.3.6.1.4.1.9.9.500.0.0.7 - cswStackPowerPortOperStatusChanged
1.3.6.1.4.1.9.9.500.0.0.8 - cswStackPowerPriorityConflict
1.3.6.1.4.1.9.9.500.0.0.17 - cswStackPowerSRLS
1.3.6.1.4.1.9.9.500.0.0.21 - cswStackPowerSSLS
1.3.6.1.4.1.9.9.500.0.0.22 - cswStackPowerUnbalancedPowerSupplies
1.3.6.1.4.1.9.9.500.0.0.15 - cswStackPowerUnderBudget
1.3.6.1.4.1.9.9.500.0.0.14 - cswStackPowerUnderVoltage
1.3.6.1.4.1.9.9.500.0.0.18 - cswStackPowerVersionMismatch
1.3.6.1.4.1.9.9.500.0.0.9 - cswStackRingRedundant
1.3.6.1.4.1.9.9.500.0.0.4
Groups and compliance
- cswDistrStackLinkStatusGroup
- cswDistrStackPhyPortStatusGroup
- cswNotificationGroup
- cswNotificationGroupSup1
- cswStackPowerAllocatedGroup
- cswStackPowerEnableNotificationGroup
- cswStackPowerNotificationGroup
- cswStackPowerPortStatusGroup
- cswStackPowerStatusGroup
- cswStackPowerSwitchStatusGroup
- cswStackWiseMIBCompliance
- cswStackWiseMIBComplianceRev1
- cswStackWiseMIBComplianceRev2
- cswStackWiseMIBComplianceRev3
- cswStackWiseMIBComplianceRev4
- cswStatusGroup
- cswStatusGroupRev1
- cswStatusGroupRev2