CISCO-SLB-HEALTH-MON-MIB
ciscoSystemsAn extension to the CISCO-SLB-EXT-MIB for SLB
health monitoring probes.
SLB: Server Load Balancing. Server load balancing
provides for the balancing of packets and connections
arriving at the SLB device across a number of other
devices, such as real servers, firewalls, or caches.
A system containing an SLB device typically exhibits
higher performance, scalability, and reliability than
any of the devices being load balanced. An SLB device
determines how to handle incoming frames and
connections according to the contents of incoming data
and various configuration options. In determining how
to handle incoming data, an SLB device may examine the
data at any OSI layer, including Layer 7.
This MIB includes information on the health monitoring
probes that can be used for monitoring the health of
real servers. Health checking provides the ability of
the content switch to detect if a server is available
for load balancing. Health probes used for health
checking allow testing various application level
functionality. The active probes are sent at regular
intervals and the lack of a response can lead to a
specific server or and entire group of servers being
declared as not available.
Following probes are based on TCP:
http, https, smtp, telnet, ftp, tcp,
script, ldap, tacacs, sip, echo, finger.
Following probes are based on UDP:
tftp, udp, sip, echo,.
Acronyms and terms:
SLB Server Load Balancing
VIP Virtual Server IP address
NAT Network Address Translation
SF Serverfarm
FT Fault Tolerance
SSL Secure Sockets Layer
TLS Transport Layer Security
Server Farm : Contains cluster of Real Server
Real Server : Real Servers are physical devices
assigned to a server farm.
Real servers provide services that
are load balanced.
Health Probe : The mechanisms to monitor the health
of real servers or rservers.
Virtual IP : The IP through which the real server is
reached during load balancing.
Probe Instance : An instance of the probe identified by
cslbxProbeName. A probe instance is created
for every probe association.
For example: When a probe is associated with
a real server a probe instance is created
for that probe.
Probe Port : This mechanism introduces the capability
Inheritance for the probe instance to inherit the
virtual ip address port or the
the real server port (identified by
cshMonServerfarmRealServerPort) when the
probe port (identified by cslbxProbePort)
is not configured.
The precedence of inheritance is as follows
1. Probe's configured port
2. Real server port
3. Virtual ip address port
4. Probes default port identified by
cslbxProbePort.
Examples:
Scenario 1:
Probe's configured port = 100
Real server port = 200
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 100
Scenario 2:
Probe's configured port = not configured
Real server port = 200
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 200
Scenario 3:
Probe's configured port = not configured
Real server port = not configured
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 300
Scenario 4:
Probe's configured port = not configured
Real server port = not configured
Virtual ip address port = not configured
Probe's default port = 80
Inherited port of the probe instance = 80
Scenario 5:
There can be scenarios wherein there may
be multiple inherited ports for a probe
instance.
There are configurations where multiple virtual
ip addresses with different ports share the
same probe instance and the probe has no
configured port or real server port attached.
In that case the shared probe instance has
multiple inherited ports. A typical scenario
might be
Probe's configured port = not configured
Real server port = not configured
Ports of the virtual ip addresses which
shares the probe instance = 300,400
Probe's default port = 80
Inherited port of the probe instance =
300,400snmptranslate -m CISCO-SLB-HEALTH-MON-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-SLB-HEALTH-MON-MIB <host> 1.3.6.1.4.1.9.9.508Imports
| CISCO-SLB-EXT-MIB | SlbFunctionNameString, SlbUrlString, cslbxServerProbes |
|---|---|
| CISCO-SLB-MIB | SlbServerString, slbEntity, slbServerFarmName |
| CISCO-SMI | ciscoMgmt |
| CISCO-TC | CiscoPort |
| INET-ADDRESS-MIB | InetAddress, InetAddressType, InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| TcslbxProbeCfgTable | 1.3.6.1.4.1.9.9.254.1.6.1 | NA | ||
table · not-accessible · current The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the parameters of probes. | ||||
| RcslbxProbeCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.1.1 | NA | ||
row · not-accessible · current This entry provides the basic configuration of a probe of a particular name, served by a particular SLB entity. This entry may be of any probe type.
| ||||
| CcslbxProbeName | 1.3.6.1.4.1.9.9.254.1.6.1.1.1 | SlbServerString | NA | |
column · SlbServerString · not-accessible · current The name of the probe. | ||||
| CcslbxProbeType | 1.3.6.1.4.1.9.9.254.1.6.1.1.2 | SlbProbeType | RC | |
column · SlbProbeType · read-create · current The type of probe. | ||||
| CcslbxProbeInterval | 1.3.6.1.4.1.9.9.254.1.6.1.1.3 | TimeInterval | RC | |
column · TimeInterval · read-create · current Time between health checks. It is from the end of previous check to the beginning of the next check.
| ||||
| CcslbxProbeRetries | 1.3.6.1.4.1.9.9.254.1.6.1.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The number of consecutive retries without a successful probe before marking the real server as 'failed'. | ||||
| CcslbxProbeFailedInterval | 1.3.6.1.4.1.9.9.254.1.6.1.1.5 | TimeInterval | RC | |
column · TimeInterval · read-create · current Time before retrying a 'failed' real server to see if it has recovered yet.
| ||||
| CcslbxProbeReceiveTimeout | 1.3.6.1.4.1.9.9.254.1.6.1.1.6 | TimeInterval | RC | |
column · TimeInterval · read-create · current Maximum time to wait for a reply from a real server before considering this probe attempt to have failed.
| ||||
| CcslbxProbeTcpOpenTimeout | 1.3.6.1.4.1.9.9.254.1.6.1.1.7 | TimeInterval | RC | |
column · TimeInterval · read-create · current Maximum time to wait for a TCP SYN/ACK frame from the real server. This entry is only valid for probes employing TCP, such as SMTP and HTTP probes.
| ||||
| CcslbxProbeAlternateDestAddrType | 1.3.6.1.4.1.9.9.254.1.6.1.1.8 | InetAddressType | RC | |
column · InetAddressType · read-create · current The type of address stored in cslbxProbeAlternateDestAddr. | ||||
| CcslbxProbeAlternateDestAddr | 1.3.6.1.4.1.9.9.254.1.6.1.1.9 | InetAddress (SIZE (0..20)) | RC | |
column · InetAddress (SIZE (0..20)) · read-create · current The alternative destination IP address to be used with
the probing packet. Probe frames are normally sent to
a real server IP address. If the setting is not
'0.0.0.0', probe frames are sent to the IP address
given by this object. This entry is only valid with
the following probes(cslbxProbeType value):
icmpProbe, tcpProbe, dnsProbe,
httpProbe, ftpProbe, telnetProbe,
smtpProbe udpProbe, httpsProbe,
ldapProbe, popProbe, imapProbe,
radiusProbe, tacacsProbe, sipProbe,
tftpProbe, fingerProbe, echoProbe. | ||||
| CcslbxProbeDnsDomainName | 1.3.6.1.4.1.9.9.254.1.6.1.1.10 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current The domain name string use with the DNS probe. (Only applicable to DNS probes.) | ||||
| CcslbxProbeHttpRequestMethod | 1.3.6.1.4.1.9.9.254.1.6.1.1.11 | SnmpAdminString (SIZE (0..64)) | RC | |
column · SnmpAdminString (SIZE (0..64)) · read-create · current The request method type string to be used in the HTTP probe packets. (Only applicable to HTTP probes.) | ||||
| CcslbxProbeHttpRequestUrl | 1.3.6.1.4.1.9.9.254.1.6.1.1.12 | SlbUrlString | RC | |
column · SlbUrlString · read-create · current The URI string in the HTTP request of HTTP probe packets. (Only applicable to HTTP probes.) | ||||
| CcslbxProbeRowStatus | 1.3.6.1.4.1.9.9.254.1.6.1.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current The row status is used by a management station to create or delete the row entry in cslbxProbeCfgTable following the RowStatus textual convention. | ||||
| CcslbxProbeScriptName | 1.3.6.1.4.1.9.9.254.1.6.1.1.14 | SlbFunctionNameString | RC | |
column · SlbFunctionNameString · read-create · current The name of the function to be executed. (Only applicable to scriptedProbe type.) | ||||
| CcslbxProbeScriptArguments | 1.3.6.1.4.1.9.9.254.1.6.1.1.15 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current The argument parameters passed into the executable script. (Only applicable to scriptedProbe type.) | ||||
| CcslbxProbePort | 1.3.6.1.4.1.9.9.254.1.6.1.1.16 | CiscoPort | RC | |
column · CiscoPort · read-create · current The port number to be used by the probe. The value of zero indicates the probe will use the default port number. The default port number can be 0 or the default port of that particular probe. This object is not applicable when cslbxProbeType is 'icmpProbe'. | ||||
| CcslbxProbeDescription | 1.3.6.1.4.1.9.9.254.1.6.1.1.17 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current This object is used for configuring the description of the probe. | ||||
| CcslbxProbeRouteMethod | 1.3.6.1.4.1.9.9.254.1.6.1.1.18 | INTEGER | RC | |
column · INTEGER · read-create · current This object specifies whether the probe destined to IP address specified in cslbxProbeAlternateDestAddr be routed using internal routing table or forced to use the known mac-address of the real-server/gateway that probe is associated with. The value 'routingTable' specifies that address be routed using internal routing table. The value 'transparent' specifies that the probe destined to cslbxProbeAlternateDestAddr is routed using the ip address of the real server or gateway this probe is associated with. This object is applicable only if cslbxProbeAlternateDestAddr is configured.
| ||||
| CcslbxProbeProtocolType | 1.3.6.1.4.1.9.9.254.1.6.1.1.19 | INTEGER | RC | |
column · INTEGER · read-create · current This object is used for configuring the
transport layer protocol to send
probe messages.
The possible value(s) are :
other: values other than mentioned below.
This value can not be written.
tcp : TCP is used as transport
layer protocol.
udp : UDP is used as transport
layer protocol.
This object can be set for the entries with
following values of cslbxProbeType:
sipProbe,
echoProbe
For other probes, this object can not be written
and the value of this object is based on the
cslbxProbeType.
| ||||
| CcslbxProbePassCount | 1.3.6.1.4.1.9.9.254.1.6.1.1.20 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object specifies the number of successful probe responses that should be received before declaring a failed real server as pass. This object is used in conjunction with 'cslbxProbeFailedInterval'. | ||||
| CcslbxProbePriority | 1.3.6.1.4.1.9.9.254.1.6.1.1.21 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current This object represents the probe priority. The priority value is in the decreasing order of the actual priority, i.e., lower the value higher the priority. Probes associated with critical services can be configured with highest priority such that the results of these probes can be used to trigger a state change in configuration. | ||||
| CcslbxProbeUserName | 1.3.6.1.4.1.9.9.254.1.6.1.1.22 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current This object represents the user name required for
authentication. This object is applicable for
following value of 'cslbxProbeType' :
httpprobe, httpsProbe
telnetProbe, ftpProbe, ldapProbe,
imapProbe, popProbe,
radiusProbe, tacacsProbe. | ||||
| CcslbxProbePassword | 1.3.6.1.4.1.9.9.254.1.6.1.1.23 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current This object represents the password required for
authentication. This object is applicable for following
value of 'cslbxProbeType' :
httpprobe, httpsProbe
telnetProbe, ftpProbe, ldapProbe,
imapProbe, popProbe,
radiusProbe, tacacsProbe.
This object returns zero length octet string when read. | ||||
| CcslbxProbeConnTermination | 1.3.6.1.4.1.9.9.254.1.6.1.1.24 | INTEGER | RC | |
column · INTEGER · read-create · current This object specifies how the connections need to
be terminated. The possible value(s) are :
graceful : follow graceful handshake for
terminating connections.
forced : send RST to terminate connections.
This object is applicable only for TCP based probes.
| ||||
| CcslbxProbeSocketReuse | 1.3.6.1.4.1.9.9.254.1.6.1.1.25 | TruthValue | RC | |
column · TruthValue · read-create · current This object specifies whether to reuse the socket or not for the connection oriented probes. If set to 'true' same socket is re-used for multiple probes. If set to 'false' new socket will be created. This object is applicable only for TCP based probes. | ||||
| CcslbxProbeSendDataType | 1.3.6.1.4.1.9.9.254.1.6.1.1.26 | INTEGER | RC | |
column · INTEGER · read-create · current This object represents the data to be sent for the appropriate probes. The possible value(s) are: ascii : ASCII data binary : binary data. This object is used in conjunction with object 'cslbxProbeSendData'.
| ||||
| CcslbxProbeSendData | 1.3.6.1.4.1.9.9.254.1.6.1.1.27 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current This object represents the data to be sent for the appropriate probes. This object is applicable for following value(s) of cslbxProbeType : echoProbe fingerProbe sipProbe tcpProbe udpProbe. | ||||
| CcslbxProbeState | 1.3.6.1.4.1.9.9.254.1.6.1.1.28 | TruthValue | RO | |
column · TruthValue · read-only · current This object represents the state of the probe. When the probe is associated with a real server or server farm it will be active which is represented by value 'true'. When the probe is active and if the real server is administratively put into in-service, then the real server health monitoring will be started. When the probe is not associated with a real server or server farm it will be inactive which is represented by value 'false', so no health monitoring will be performed. | ||||
| TcslbxDnsProbeIpTable | 1.3.6.1.4.1.9.9.254.1.6.2 | NA | ||
table · not-accessible · current The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the parameters of DNS probes. In a DNS probe, resolution of a specific domain name is requested, and the resulting IP address must match one of a list of 'expected IP addresses' configured for that probe. This table stores the list of expected IP addresses for each DNS probe. | ||||
| RcslbxDnsProbeIpEntry | 1.3.6.1.4.1.9.9.254.1.6.2.1 | NA | ||
row · not-accessible · current The IP address in this entry is a valid response to a request for resolution of the domain name associated with the DNS probe in this entry. | ||||
| CcslbxDnsProbeIpProbeName | 1.3.6.1.4.1.9.9.254.1.6.2.1.1 | SlbServerString | NA | |
column · SlbServerString · not-accessible · current The name of the DNS probe. | ||||
| CcslbxDnsProbeIpAddressType | 1.3.6.1.4.1.9.9.254.1.6.2.1.2 | InetAddressType | NA | |
column · InetAddressType · not-accessible · current The type of address stored in cslbxDnsProbeIpAddress. | ||||
| CcslbxDnsProbeIpAddress | 1.3.6.1.4.1.9.9.254.1.6.2.1.3 | InetAddress (SIZE (1..20)) | NA | |
column · InetAddress (SIZE (1..20)) · not-accessible · current The IP address that may be expected in response to a DNS probe from a 'healthy' real DNS server. | ||||
| CcslbxDnsProbeIpRowStatus | 1.3.6.1.4.1.9.9.254.1.6.2.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The object used by a management station to create or delete the row entry in cslbxDnsProbeIpTable following the RowStatus textual convention. | ||||
| TcslbxProbeHeaderCfgTable | 1.3.6.1.4.1.9.9.254.1.6.3 | NA | ||
table · not-accessible · current The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the parameters of HTTP probes. In particular, each HTTP probe request may be sent with a number of fixed HTTP headers. This table defines such fixed HTTP headers sent with HTTP probes. | ||||
| RcslbxProbeHeaderCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.3.1 | NA | ||
row · not-accessible · current This entry defines the HTTP header value of a particular HTTP header name sent with a particular HTTP probe, served by a particular SLB entity. | ||||
| CcslbxProbeHeaderProbeName | 1.3.6.1.4.1.9.9.254.1.6.3.1.1 | SlbServerString | NA | |
column · SlbServerString · not-accessible · current The name of the HTTP probe. | ||||
| CcslbxProbeHeaderFieldName | 1.3.6.1.4.1.9.9.254.1.6.3.1.2 | SnmpAdminString (SIZE (1..64)) | NA | |
column · SnmpAdminString (SIZE (1..64)) · not-accessible · current An HTTP header of this name is transmitted in the HTTP request sent by this probe. | ||||
| CcslbxProbeHeaderFieldValue | 1.3.6.1.4.1.9.9.254.1.6.3.1.3 | SnmpAdminString | RC | |
column · SnmpAdminString · read-create · current The HTTP header value associated with the HTTP header name given by cslbxProbeHeaderFieldName. | ||||
| CcslbxProbeHeaderRowStatus | 1.3.6.1.4.1.9.9.254.1.6.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The object used by a management station to create or delete the row entry in cslbxProbeHeaderTable following the RowStatus textual convention. | ||||
| TcslbxProbeExpectStatusCfgTable | 1.3.6.1.4.1.9.9.254.1.6.4 | NA | ||
table · not-accessible · current The probing function monitors the health of real servers. The SLB device actively probes real servers to determine if they are healthy. This table is for configuring the expect status codes returned by a server. | ||||
| RcslbxProbeExpectStatusCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.4.1 | NA | ||
row · not-accessible · current This entry provides the configuration of a range of expect status codes for a particular probe, served by a particular SLB entity. | ||||
| CcslbxProbeExpectStatusProbeName | 1.3.6.1.4.1.9.9.254.1.6.4.1.1 | SlbServerString | NA | |
column · SlbServerString · not-accessible · current The name of the probe. | ||||
| CcslbxProbeExpectStatusMinValue | 1.3.6.1.4.1.9.9.254.1.6.4.1.2 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The starting value of the expect status code range. | ||||
| CcslbxProbeExpectStatusMaxValue | 1.3.6.1.4.1.9.9.254.1.6.4.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The ending value of the expect status code range. | ||||
| CcslbxProbeExpectStatusRowStatus | 1.3.6.1.4.1.9.9.254.1.6.4.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The object used by a management station to create or delete the row entry in cslbxProbeExpectStatusCfgTable following the RowStatus textual convention. | ||||
| TcslbxProbeHTTPCfgTable | 1.3.6.1.4.1.9.9.254.1.6.5 | NA | ||
table · not-accessible · current This table is for configuring attributes
applicable to HTTP and HTTPS probes.
This table supports configuration of the probe
attributes in addition to the HTTP attributes
configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to HTTP/HTTPS probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbeHttpRequestMethod
cslbxProbeHttpRequestUrl
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout
cslbxProbeConnTermination
cslbxProbePriority
cslbxProbePassCount
An HTTP probe establishes an HTTP connection to
a real server and then sends an HTTP request
and verifies the response.
This table is applicable only for the instance
value of cslbxProbeType 'httpProbe' or 'httpsProbe'. | ||||
| RcslbxProbeHTTPCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.5.1 | NA | ||
row · not-accessible · current An entry in HTTP Probe configuration table.
An entry is created in the table when
an entry is created in cslbxProbeCfgTable
with cslbxProbeType 'httpProbe' or
'httpsProbe'.
An entry is deleted from this table when
corresponding entry (identified by the indices)
is deleted from cslbxProbeCfgTable.
Following objects are applicable to both
HTTP and HTTPS Probes:
cslbxProbeHTTPCfgVersion
cslbxProbeHTTPCfgPersistence
cslbxProbeHTTPCfgHashValid
cslbxProbeHTTPCfgHashName
Following objects are applicable only for
HTTPS Probes:
cslbxProbeHTTPCfgCipherSuite
cslbxProbeHTTPCfgSslTlsVersion
cslbxProbeHTTPCfgSslSessionReuse.
The 'cslbxProbeName' refers to the probe which
is created by adding an entry in
'cslbxProbeCfgTable' with cslbxProbeType
'httpProbe' or 'httpsProbe'.
| ||||
| CcslbxProbeHTTPCfgVersion | 1.3.6.1.4.1.9.9.254.1.6.5.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object represents HTTP version for the probe. The 'htpOneDotZero' specifies HTTP 1.0 protocol. The 'htpOneDotOne' specifies HTTP 1.1 protocol.
| ||||
| CcslbxProbeHTTPCfgPersistence | 1.3.6.1.4.1.9.9.254.1.6.5.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This object enables/disables persistence for HTTP(for both 1.0 and 1.1) probes. The pure HTTP/1.0 requires that a seperate TCP connection to be opened for each downloaded object. The persistence allows TCP connections to be re-used while requesting multiple objects without incurring a overhead of opening a new TCP connection. | ||||
| CcslbxProbeHTTPCfgHashValid | 1.3.6.1.4.1.9.9.254.1.6.5.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current This object enables the hash functionality. If set to 'true', the cslbxProbeHTTPCfgHashName is used. If set 'false' the value specified in cslbxProbeHTTPCfgHashName is not used. | ||||
| CcslbxProbeHTTPCfgHashName | 1.3.6.1.4.1.9.9.254.1.6.5.1.4 | SnmpAdminString | RW | |
column · SnmpAdminString · read-write · current This object specifies the hash value for the probe. | ||||
| CcslbxProbeHTTPCfgCipherSuite | 1.3.6.1.4.1.9.9.254.1.6.5.1.5 | INTEGER | RW | |
column · INTEGER · read-write · current This object represents SSL Cipher suites to be used for HTTPS probes. The value 'rsa_any' is used for selecting a random cipher. The value 'rsaOther' specifies value other than those defined in the object. This value can not be written.
| ||||
| CcslbxProbeHTTPCfgSslTlsVersion | 1.3.6.1.4.1.9.9.254.1.6.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current This object represents the version of
the SSL/TLS protocol.
The possible value(s) are :
other : Version not applicable.
This value can not be set by the user.
sslv2 : SSL Version 2.0.
sslv3 : SSL Version 3.0.
tlsv1 : TLS Version 1.0.
all : All supported versions as reported in
cslbxProbeHTTPSslTlsVersionSupported
object.
| ||||
| CcslbxProbeHTTPCfgSslSessionReuse | 1.3.6.1.4.1.9.9.254.1.6.5.1.7 | TruthValue | RW | |
column · TruthValue · read-write · current This object enables/disables reusing of the SSL Session ID. If set to 'true', SSL session ID will be reused. If set to 'false', SSL session ID will not be reused. In SSL, a new session ID is created every time the client and the SSL module go through a full key exchange and establish a new master secret key. Enabling this object allows the SSL module to reuse the master key on subsequent connections with the client, which can speed up the SSL negotiation process. | ||||
| CcslbxProbeHTTPSslTlsVersionSupported | 1.3.6.1.4.1.9.9.254.1.6.5.1.8 | Bits | RO | |
column · Bits · read-only · current This object identifies the supported SSL/TLS versions. sslv3 - SSL version 3.0. tlsv1 - TLS version 1.0.
| ||||
| TcslbxProbeSIPCfgTable | 1.3.6.1.4.1.9.9.254.1.6.6 | NA | ||
table · not-accessible · current This table is for configuring attributes
applicable to SIP probes.
The Session Initiation Protocol (SIP) is an ASCII-based,
application-layer control protocol that can be used to
establish, maintain, and terminate calls between two
or more endpoints. SIP is an alternative protocol
developed by the Internet Engineering Task Force (IETF)
for multimedia conferencing over IP.
This table supports configuration of the probe
attributes in addition to the attributes configured
in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to SIP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout
cslbxProbeConnTermination
cslbxProbeSocketReuse
cslbxProbePassCount
This table is applicable only if the value of
cslbxProbeType is 'sipProbe'. | ||||
| RcslbxProbeSIPCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.6.1 | NA | ||
row · not-accessible · current An entry in SIP Probe configuration table. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'sipProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'sipProbe'.
| ||||
| CcslbxProbeSIPRegAddress | 1.3.6.1.4.1.9.9.254.1.6.6.1.1 | SnmpAdminString (SIZE (0..255)) | RW | |
column · SnmpAdminString (SIZE (0..255)) · read-write · current This object represents the Registration address used in SIP protocol. Users in a SIP network are identified by unique SIP addresses. A SIP address is similar to an e-mail address and is in the format of 'sip:[email protected]'. The userID can be either a user name or an E.164 address. An E.164 address is a telephone number with a string of decimal digits that uniquely indicates the public network termination point. The number contains the information necessary to route the call to this termination point. | ||||
| TcslbxProbeFTPCfgTable | 1.3.6.1.4.1.9.9.254.1.6.7 | NA | ||
table · not-accessible · current This table is for configuring attributes
applicable to FTP probes. This table supports
configuration of the probe attributes in addition
to the FTP attributes configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to FTP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeTcpOpenTimeout
cslbxProbeConnTermination
cslbxProbeSocketReuse
cslbxProbePassCount
This table is applicable only if the value of
cslbxProbeType is 'ftpProbe'. | ||||
| RcslbxProbeFTPCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.7.1 | NA | ||
row · not-accessible · current An entry in FTP Probe configuration table. Each entry represents the FTP request, File name and File type. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'ftpProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'ftpProbe'.
| ||||
| CcslbxProbeFtpRequestMethod | 1.3.6.1.4.1.9.9.254.1.6.7.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the FTP request to be used
in FTP probe packets.
The possible value(s) are:
other : other than the values mentioned below.
This value can not be written.
ls : list files.
get : Get request.
put : Put request.
| ||||
| CcslbxProbeFtpRequestFileName | 1.3.6.1.4.1.9.9.254.1.6.7.1.2 | SlbUrlString | RW | |
column · SlbUrlString · read-write · current The string representing the File Name used in FTP Probe. | ||||
| CcslbxProbeFtpRequestFileType | 1.3.6.1.4.1.9.9.254.1.6.7.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the type of the data transferred from/to in case of FTP requests.
| ||||
| TcslbxProbeTFTPCfgTable | 1.3.6.1.4.1.9.9.254.1.6.8 | NA | ||
table · not-accessible · current This table is for configuring attributes
applicable to TFTP probes. This table supports
configuration of the probe attributes in addition
to the TFTP attributes configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to TFTP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbePort
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbePassCount
This table is applicable only if the value of
cslbxProbeType is 'tftpProbe'. | ||||
| RcslbxProbeTFTPCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.8.1 | NA | ||
row · not-accessible · current An entry in TFTP Probe configuration table. Each entry represents the TFTP probe related parameters. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'tftpProbe'. An entry is deleted from this table when correspnding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'tftpProbe'.
| ||||
| CcslbxProbeTftpRequestMethod | 1.3.6.1.4.1.9.9.254.1.6.8.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current This object identifies the TFTP request to be used
in TFTP probe packets.
The possible value(s) are:
get : Get request.
put : Put request.
| ||||
| CcslbxProbeTftpRequestFileName | 1.3.6.1.4.1.9.9.254.1.6.8.1.2 | SlbUrlString | RW | |
column · SlbUrlString · read-write · current The string representing the File Name used in TFTP Probe. | ||||
| CcslbxProbeTftpRequestFileType | 1.3.6.1.4.1.9.9.254.1.6.8.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current This object specifies the type of the data transferred from/to in case of FTP requests.
| ||||
| TcslbxProbeIMAPCfgTable | 1.3.6.1.4.1.9.9.254.1.6.9 | NA | ||
table · not-accessible · current This table is for configuring attributes
applicable to IMAP probe.
This table supports configuration of the probe
attributes in addition to the IMAP attributes
configured in cslbxProbeCfgTable.
Following objects from cslbxProbeCfgTable are applicable
to IMAP probe:
cslbxProbeAlternateDestAddrType
cslbxProbeAlternateDestAddr
cslbxProbeRouteMethod
cslbxProbePort
cslbxProbeUserName
cslbxProbePassword
cslbxProbeInterval
cslbxProbeRetries
cslbxProbeFailedInterval
cslbxProbeReceiveTimeout
cslbxProbeConnTermination
cslbxProbePriority
cslbxProbePassCount
An IMAP probe initiates a IMAP session and then
attempts to retrieve e-mail from the server and
verifies the response.
This table is applicable only if the value of
cslbxProbeType is 'imapProbe'. | ||||
| RcslbxProbeIMAPCfgEntry | 1.3.6.1.4.1.9.9.254.1.6.9.1 | NA | ||
row · not-accessible · current An entry in IMAP Probe configuration table. Each entry represents the IMAP probe related parameters. An entry is created in the table when an entry is created in cslbxProbeCfgTable with cslbxProbeType 'imapProbe'. An entry is deleted from this table when corresponding entry (identified by the indices) is deleted from cslbxProbeCfgTable. The 'cslbxProbeName' refers to the probe which is created by adding an entry in 'cslbxProbeCfgTable' with cslbxProbeType 'imapProbe'.
| ||||
| CcslbxProbeIMAPMailBox | 1.3.6.1.4.1.9.9.254.1.6.9.1.1 | SnmpAdminString | RW | |
column · SnmpAdminString · read-write · current This object is used for configuring the IMAP Mailbox value. | ||||
| CcslbxProbeIMAPMethodName | 1.3.6.1.4.1.9.9.254.1.6.9.1.2 | SnmpAdminString | RW | |
column · SnmpAdminString · read-write · current This object is used for configuring
the IMAP method. The value can be
any IMAP method. Some of the example(s) are:
FETCH, NOOP, STAT, RETR | ||||
| IciscoSlbHealthMonMIB | 1.3.6.1.4.1.9.9.508 | |||
identity An extension to the CISCO-SLB-EXT-MIB for SLB
health monitoring probes.
SLB: Server Load Balancing. Server load balancing
provides for the balancing of packets and connections
arriving at the SLB device across a number of other
devices, such as real servers, firewalls, or caches.
A system containing an SLB device typically exhibits
higher performance, scalability, and reliability than
any of the devices being load balanced. An SLB device
determines how to handle incoming frames and
connections according to the contents of incoming data
and various configuration options. In determining how
to handle incoming data, an SLB device may examine the
data at any OSI layer, including Layer 7.
This MIB includes information on the health monitoring
probes that can be used for monitoring the health of
real servers. Health checking provides the ability of
the content switch to detect if a server is available
for load balancing. Health probes used for health
checking allow testing various application level
functionality. The active probes are sent at regular
intervals and the lack of a response can lead to a
specific server or and entire group of servers being
declared as not available.
Following probes are based on TCP:
http, https, smtp, telnet, ftp, tcp,
script, ldap, tacacs, sip, echo, finger.
Following probes are based on UDP:
tftp, udp, sip, echo,.
Acronyms and terms:
SLB Server Load Balancing
VIP Virtual Server IP address
NAT Network Address Translation
SF Serverfarm
FT Fault Tolerance
SSL Secure Sockets Layer
TLS Transport Layer Security
Server Farm : Contains cluster of Real Server
Real Server : Real Servers are physical devices
assigned to a server farm.
Real servers provide services that
are load balanced.
Health Probe : The mechanisms to monitor the health
of real servers or rservers.
Virtual IP : The IP through which the real server is
reached during load balancing.
Probe Instance : An instance of the probe identified by
cslbxProbeName. A probe instance is created
for every probe association.
For example: When a probe is associated with
a real server a probe instance is created
for that probe.
Probe Port : This mechanism introduces the capability
Inheritance for the probe instance to inherit the
virtual ip address port or the
the real server port (identified by
cshMonServerfarmRealServerPort) when the
probe port (identified by cslbxProbePort)
is not configured.
The precedence of inheritance is as follows
1. Probe's configured port
2. Real server port
3. Virtual ip address port
4. Probes default port identified by
cslbxProbePort.
Examples:
Scenario 1:
Probe's configured port = 100
Real server port = 200
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 100
Scenario 2:
Probe's configured port = not configured
Real server port = 200
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 200
Scenario 3:
Probe's configured port = not configured
Real server port = not configured
Virtual ip address port = 300
Probe's default port = 80
Inherited port of the probe instance = 300
Scenario 4:
Probe's configured port = not configured
Real server port = not configured
Virtual ip address port = not configured
Probe's default port = 80
Inherited port of the probe instance = 80
Scenario 5:
There can be scenarios wherein there may
be multiple inherited ports for a probe
instance.
There are configurations where multiple virtual
ip addresses with different ports share the
same probe instance and the probe has no
configured port or real server port attached.
In that case the shared probe instance has
multiple inherited ports. A typical scenario
might be
Probe's configured port = not configured
Real server port = not configured
Ports of the virtual ip addresses which
shares the probe instance = 300,400
Probe's default port = 80
Inherited port of the probe instance =
300,400 | ||||
| NciscoSlbHealthMonMIBNotifs | 1.3.6.1.4.1.9.9.508.0 | |||
| !cshMonSocketOveruse | 1.3.6.1.4.1.9.9.508.0.1 | |||
notification · current The notification is generated when probes socket usage exceeds or equals 90% atleast 100 times in one minute. The object cshMonSocketOverusageCount represents the number of times the probes socket usage exceeded 90 percentage in that minute.
| ||||
| !cshMonSocketNormalUse | 1.3.6.1.4.1.9.9.508.0.2 | |||
notification · current The notification is generated when the probes socket usage becomes normal i.e the socket usage does not exceed 90% 100 or more times in that minute and after cshMonSocketOveruse notification is generated. The object cshMonSocketOverusageCount represents the number of times the probes socket usage exceeded 90 percentage in that minute.
| ||||
| NciscoSlbHealthMonMIBObjects | 1.3.6.1.4.1.9.9.508.1 | |||
| NcshMonSfarmProbes | 1.3.6.1.4.1.9.9.508.1.1 | |||
| TcshMonSfarmRealProbeStatsTable | 1.3.6.1.4.1.9.9.508.1.1.1 | NA | deprecated | |
table · not-accessible · deprecated This table provides the statistics of a probe applied to a real server. This will address probes configured under a serverfarm and also under a real server. Deprecated because of the change in index requirement. | ||||
| RcshMonSfarmRealProbeStatsEntry | 1.3.6.1.4.1.9.9.508.1.1.1.1 | NA | deprecated | |
row · not-accessible · deprecated Each entry provides the probe related
stats for a real server.
In the following cases one or more entries get created:
1. An entry gets created when an entry is created in the
cesRealServerProbeTable.
2. When an entry is created in
cslbxServerFarmProbeTable (identified by
INDEX cslbxServerFarmProbeFarmName), then entries are
created in this table with as many entries in
cesServerFarmRserverTable (identified by
INDEX slbServerFarmName) for the same server farm.
3. When an entry is created in
cesServerFarmRserverTable (identified by INDEX
slbServerFarmName), then entries are created in this
table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm.
In the following cases one or more entries get deleted:
1. An entry gets deleted when an entry is deleted from the
cesRealServerProbeTable.
2. When an entry is deleted from
cslbxServerFarmProbeTable (identified by
INDEX cslbxServerFarmProbeFarmName), then entries are
deleted from this table with as many entries in
cesServerFarmRserverTable (identified by
INDEX slbServerFarmName) for the same server farm.
3. When an entry is deleted from
cesServerFarmRserverTable (identified by INDEX
slbServerFarmName), then entries are deleted from this
table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm. | ||||
| CcshMonSfarmRealServerName | 1.3.6.1.4.1.9.9.508.1.1.1.1.1 | SnmpAdminString (SIZE (1..255)) | NA | deprecated |
column · SnmpAdminString (SIZE (1..255)) · not-accessible · deprecated This object identifies the name (unique identifier) of the real server. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesRserverName) or cesRealServerProbeTable (identified by INDEX cesRserverName). | ||||
| CcshMonSfarmRealServerPort | 1.3.6.1.4.1.9.9.508.1.1.1.1.2 | InetPortNumber | NA | deprecated |
column · InetPortNumber · not-accessible · deprecated The port number of the real server. The value zero specifies that port number is not used in conjunction with real server IP Address. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesServerFarmRserverPort) or cesRealServerProbeTable (identified by INDEX cesServerFarmRserverPort). | ||||
| CcshMonSfarmRealProbesPassed | 1.3.6.1.4.1.9.9.508.1.1.1.1.3 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of probes passed for this real server. The probe is identified as pass if the real server returns a valid response. | ||||
| CcshMonSfarmRealProbesFailed | 1.3.6.1.4.1.9.9.508.1.1.1.1.4 | Counter32 | RO | deprecated |
column · Counter32 · read-only · deprecated The number of probes failed for this real server. The probe is identified as failed if the real server fails to provide a valid response for a specified number of retries. | ||||
| CcshMonSfarmRealProbeHealthMonState | 1.3.6.1.4.1.9.9.508.1.1.1.1.5 | CiscoProbeHealthMonState | RO | deprecated |
column · CiscoProbeHealthMonState · read-only · deprecated The health monitor state of the probe for this real server. | ||||
| TcshMonProbeTypeStatsTable | 1.3.6.1.4.1.9.9.508.1.1.2 | NA | ||
table · not-accessible · current This table provides the accumulated statistics for each probe type. | ||||
| RcshMonProbeTypeStatsEntry | 1.3.6.1.4.1.9.9.508.1.1.2.1 | NA | ||
row · not-accessible · current An entry in the cshMonProbeTypeStatsTable. 1. The entries in the table are created when the system boots up. 2. There is no use case where the entries gets deleted. The 'slbEntity'is used in identifying the module in which configuration is applied. The 'cslbxProbeType' identifies the type of the probe.
| ||||
| CcshMonProbeTotalSentProbes | 1.3.6.1.4.1.9.9.508.1.1.2.1.1 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes sent to the real servers. | ||||
| CcshMonProbeTotalPassedProbes | 1.3.6.1.4.1.9.9.508.1.1.2.1.2 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of passed probes. The probe is identified as pass if the real server returns a valid response. | ||||
| CcshMonProbeTotalConnectionErrors | 1.3.6.1.4.1.9.9.508.1.1.2.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes that received connection errors while trying to connect to the real server. | ||||
| CcshMonProbeTotalReceivedRSTs | 1.3.6.1.4.1.9.9.508.1.1.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes that received TCP RST. | ||||
| CcshMonProbeTotalReceiveTimeouts | 1.3.6.1.4.1.9.9.508.1.1.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes that suffered receive timeouts. | ||||
| CcshMonProbeTotalSendFailures | 1.3.6.1.4.1.9.9.508.1.1.2.1.6 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes failed due to internal errors. Internal errors are unexpected errors during configuration, scheduling or processing a probe. | ||||
| CcshMonProbeTotalFailedProbes | 1.3.6.1.4.1.9.9.508.1.1.2.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of failed probes. The probe is identified as failed if the real server fails to provide a valid response for a specified number of retries. | ||||
| CcshMonProbeTotalRefusedConns | 1.3.6.1.4.1.9.9.508.1.1.2.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes whose connections were refused by the real servers. | ||||
| CcshMonProbeTotalOpenTimeouts | 1.3.6.1.4.1.9.9.508.1.1.2.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes that received timeout while trying to open a connection to the real server. | ||||
| CcshMonProbeTotalActiveSockets | 1.3.6.1.4.1.9.9.508.1.1.2.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes that are currently using a socket in the system. | ||||
| TcshMonServerfarmRealProbeStatsTable | 1.3.6.1.4.1.9.9.508.1.1.3 | NA | ||
table · not-accessible · current This table provides the statistics of a probe applied to a real server. This will address probes configured under a serverfarm and also under a real server. | ||||
| RcshMonServerfarmRealProbeStatsEntry | 1.3.6.1.4.1.9.9.508.1.1.3.1 | NA | ||
row · not-accessible · current Each entry provides the probe related stats for a real server.
Please refer to 'probe port inheritance' explained in this
MODULE-IDENTITY description.
In the following cases one or more entries get created:
1. When an entry is created in cesRealServerProbeTable,
then an equal number of entries are created in this
table for each inherited port associated with each
probe instance.
2. When an entry is created in cslbxServerFarmProbeTable
(identified by INDEX cslbxServerFarmProbeFarmName), then
entries are created in this table with as many entries
in cesServerFarmRserverTable (identified by INDEX
slbServerFarmName) for the same server farm multiplied
by the number of inherited ports associated with each
probe instance.
3. When an entry is created in cesServerFarmRserverTable
(identified by INDEX slbServerFarmName), then entries
are created in this table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm
multiplied by the number of inherited ports associated
with each probe instance.
In the following cases one or more entries get deleted:
1. When an entry gets deleted from the
cesRealServerProbeTable, then an equal number of
entries are deleted in this table for each inherited
port associated with each probe instance.
2. When an entry is deleted from
cslbxServerFarmProbeTable (identified by
INDEX cslbxServerFarmProbeFarmName), then entries are
deleted from this table with as many entries in
cesServerFarmRserverTable (identified by
INDEX slbServerFarmName) for the same server farm
multiplied by the number of inherited ports associated
with each probe instance.
3. When an entry is deleted from
cesServerFarmRserverTable (identified by INDEX
slbServerFarmName), then entries are deleted from this
table with as many entries in
cslbxServerFarmProbeTable (identified by INDEX
cslbxServerFarmProbeFarmName) for the same server farm
multiplied by the number of inherited ports associated
with each probe instance. | ||||
| CcshMonServerfarmRealServerName | 1.3.6.1.4.1.9.9.508.1.1.3.1.1 | SnmpAdminString (SIZE (1..255)) | NA | |
column · SnmpAdminString (SIZE (1..255)) · not-accessible · current This object identifies the name (unique identifier) of the real server. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesRserverName) or cesRealServerProbeTable (identified by INDEX cesRserverName). | ||||
| CcshMonServerfarmRealServerPort | 1.3.6.1.4.1.9.9.508.1.1.3.1.2 | InetPortNumber | NA | |
column · InetPortNumber · not-accessible · current This object identifies the port number of the real server. The value zero specifies that port number is not used in conjunction with real server ip address. This value must correspond to an entry in cesServerFarmRserverTable (identified by INDEX cesServerFarmRserverPort) or cesRealServerProbeTable (identified by INDEX cesServerFarmRserverPort). | ||||
| CcshMonProbeInheritedPort | 1.3.6.1.4.1.9.9.508.1.1.3.1.3 | InetPortNumber | NA | |
column · InetPortNumber · not-accessible · current This object identifies the port number which is inherited by the probe instance. Please refer to probe port inheritance concept explained in this MODULE-IDENTITY description. | ||||
| CcshMonServerfarmRealPassedProbes | 1.3.6.1.4.1.9.9.508.1.1.3.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes passed for this real server. The probe is identified as pass if the real server returns a valid response. | ||||
| CcshMonServerfarmRealFailedProbes | 1.3.6.1.4.1.9.9.508.1.1.3.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current This object identifies the number of probes failed for this real server. The probe is identified as failed if the real server fails to provide a valid response for a specified number of retries. | ||||
| CcshMonServerfarmRealProbeHealthMonState | 1.3.6.1.4.1.9.9.508.1.1.3.1.6 | CiscoProbeHealthMonState | RO | |
column · CiscoProbeHealthMonState · read-only · current This object identifies the health monitor state of the probe for this real server. | ||||
| CcshMonServerfarmRealProbeLastProbeTime | 1.3.6.1.4.1.9.9.508.1.1.3.1.7 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object indicates the date and time of the last probe. | ||||
| CcshMonServerfarmRealProbeLastActiveTime | 1.3.6.1.4.1.9.9.508.1.1.3.1.8 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object indicates the last date and time that the probe's state transitioned to 'active'. | ||||
| CcshMonServerfarmRealProbeLastFailedTime | 1.3.6.1.4.1.9.9.508.1.1.3.1.9 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object indicates the last date and time that the probes's state transitioned to 'failed'. | ||||
| CcshMonProbeInheritedPortType | 1.3.6.1.4.1.9.9.508.1.1.3.1.10 | CiscoProbeInheritedPortType | RO | |
column · CiscoProbeInheritedPortType · read-only · current This object indentifies the type of the inherited port for this probe instance. | ||||
| NciscoSlbHealthMonNotifObjects | 1.3.6.1.4.1.9.9.508.1.2 | |||
| ScshMonSocketOverusageCount | 1.3.6.1.4.1.9.9.508.1.2.1 | Gauge32 | AN | |
scalar · Gauge32 · accessible-for-notify · current This object identifies the number of times the probes socket usage exceeded 90% in that minute. | ||||
| NciscoSlbHealthMonMIBConformance | 1.3.6.1.4.1.9.9.508.2 | |||
| NciscoSlbHealthMonMIBCompliances | 1.3.6.1.4.1.9.9.508.2.1 | |||
| MciscoSlbHealthMonMIBCompliance | 1.3.6.1.4.1.9.9.508.2.1.1 | deprecated | ||
compliance · deprecated The compliance statement for entities which implement the Cisco SLB Health monitoring MIB. | ||||
| MciscoSlbHealthMonMIBComplianceRev1 | 1.3.6.1.4.1.9.9.508.2.1.2 | deprecated | ||
compliance · deprecated The compliance statement for entities which implement the Cisco SLB Health monitoring MIB. | ||||
| MciscoSlbHealthMonMIBComplianceRev2 | 1.3.6.1.4.1.9.9.508.2.1.3 | deprecated | ||
compliance · deprecated The compliance statement for entities which implement the Cisco SLB Health monitoring MIB.
| ||||
| MciscoSlbHealthMonMIBComplianceRev3 | 1.3.6.1.4.1.9.9.508.2.1.4 | |||
compliance · current The compliance statement for entities which implement the Cisco SLB Health monitoring MIB.
| ||||
| NciscoSlbHealthMonMIBGroups | 1.3.6.1.4.1.9.9.508.2.2 | |||
| GcslbHealthMonServerProbesGroup | 1.3.6.1.4.1.9.9.508.2.2.1 | deprecated | ||
group · deprecated The second revision of the collection of SLB server health probe objects.
| ||||
| GcslbHealthMonProbeCfgExtGroup | 1.3.6.1.4.1.9.9.508.2.2.2 | |||
group · current The collection of objects to configure probes in an SLB device. | ||||
| GcslbHealthMonSIPProbesGroup | 1.3.6.1.4.1.9.9.508.2.2.3 | |||
group · current A collection of objects providing information specific to SIP Probes.
| ||||
| GcslbHealthMonFTPProbesGroup | 1.3.6.1.4.1.9.9.508.2.2.4 | |||
group · current A collection of objects providing information specific to FTP Probes. | ||||
| GcslbHealthMonHTTPProbesCommmonGroup | 1.3.6.1.4.1.9.9.508.2.2.5 | |||
group · current A collection of objects providing information specific to both HTTP and HTTPS Probes. | ||||
| GcslbHealthMonHTTPSProbesGroup | 1.3.6.1.4.1.9.9.508.2.2.6 | deprecated | ||
group · deprecated A collection of objects providing information specific to HTTPS Probes. | ||||
| GcslbHealthMonTFTPProbesGroup | 1.3.6.1.4.1.9.9.508.2.2.7 | |||
group · current A collection of objects providing information specific to TFTP Probes. | ||||
| GcslbHealthMonIMAPProbesGroup | 1.3.6.1.4.1.9.9.508.2.2.8 | |||
group · current A collection of objects providing information specific to IMAP Probes. | ||||
| GcslbHealthMonProbeScriptGroup | 1.3.6.1.4.1.9.9.508.2.2.9 | |||
group · current The collection of objects to configure scripted probes in an SLB device. | ||||
| GcslbHealthMonHTTPSProbesGroupRev1 | 1.3.6.1.4.1.9.9.508.2.2.10 | |||
group · current A collection of objects providing information specific to HTTPS Probes. | ||||
| GcslbHealthMonServerProbesGroupRev1 | 1.3.6.1.4.1.9.9.508.2.2.11 | |||
group · current The third revision of the collection of SLB server health probe objects.
| ||||
| GcshMonSfarmrealserverProbeStatsGroup | 1.3.6.1.4.1.9.9.508.2.2.12 | deprecated | ||
group · deprecated Group of objects providing statistics of a probe applied to a real server. | ||||
| GcshMonSfarmrealserverProbeStatsGroupRev1 | 1.3.6.1.4.1.9.9.508.2.2.13 | |||
group · current Group of objects providing statistics of a probe applied to a real server. | ||||
| GcshMonProbeTypeStatsGroup | 1.3.6.1.4.1.9.9.508.2.2.14 | |||
group · current Group of objects providing statistics per probe type.
| ||||
| GcshMonNotifObjectsGroup | 1.3.6.1.4.1.9.9.508.2.2.15 | |||
| GcshMonNotifGroup | 1.3.6.1.4.1.9.9.508.2.2.16 | |||
group · current A collection of objects providing healthmon notifications. | ||||
Textual conventions
CiscoProbeHealthMonStateINTEGERactive(4)disabled(6)failed(5)init(3)invalid(2)other(1)The health monitor state of the probe for a server. The possible values are : 'other' : The health monitor state of the probe when none of the other values apply. 'invalid' : Server is not being monitored. Although user has tried to associate the probe to the server, but due to some internal problem it is actually not associated. 'init' : server is configured but not tested. 'active' : server is active. All expected responses received. 'failed' : probe has failed as expected responses have failed beyond acceptable limits. 'disabled' : probe disabled due to server being outofservice or no valid ip address configured to server.CiscoProbeInheritedPortTypeINTEGERdefault(5)other(1)probe(2)real(3)vip(4)The type of the inheritance for the probe port. The possible values are : 'other' : The inherited port when none of the other values apply. 'probe' : The inherited port is the probe's configured port. 'real' : The inherited port is the port of the real server to which the probe is associated. 'vip' : The inherited port is the port of the virtual ip address. 'default' : The inherited port is the probe's default port.SlbProbeTypeINTEGERdnsProbe(3)echoProbe(20)fingerProbe(19)ftpProbe(5)httpProbe(4)httpsProbe(11)icmpProbe(1)imapProbe(14)ldapProbe(12)popProbe(13)radiusProbe(15)rtspProbe(21)scriptedProbe(8)sipProbe(17)smtpProbe(7)snmpProbe(22)tacacsProbe(16)tcpProbe(2)telnetProbe(6)tftpProbe(18)udpProbe(10)undefined(9)The probe type for probing the health of a server. 'icmpProbe' : Probe server by sending ICMP echo requests. 'tcpProbe' : Probe server by opening TCP connections. TCP probe establishes and removes connections. 'dnsProbe' : Probe server by sending DNS queries. A DNS probe sends a domain name resolve request to the real server and verifies the returned IP address. 'httpProbe' : Probe server by sending HTTP requests. An HTTP probe establishes and HTTP connection to a real server and then sends an HTTP request and verifies the response. 'ftpProbe' : Probe server by opening FTP connections. An FTP probe establishes a connection to the real server and verifies that a greeting from the application was received. 'telnetProbe' : Probe server by opening Telnet connections. A Telnet probe establishes a connection to the real server and verifies that a greeting from the application was received. 'smtpProbe' : Probe server by opening SMTP connections. An SMTP probe establishes a connection to the real server and verifies that a greeting from the application was received. 'scriptedProbe' : Probe server by executable script. 'undefined' : New probe type not yet defined. 'udpProbe' : Probe server by opening UDP ports. 'httpsProbe' : Probe server by sending HTTPS requests. 'ldapProbe' : Probe server by connecting to LDAP server. 'popProbe' : Probe server by initiating POP/POP3 session. 'imapProbe' : Probe server by initiating IMAP session. 'radiusProbe' : Probe server by connecting to RADIUS server. 'tacacsProbe' : Probe server by connecting to TACACS server. 'sipProbe' : Probe server by sending SIP Commands. 'tftpProbe' : Probe server by sending tftp requests. 'fingerProbe' : Probe server by sending the command and waiting for the response. 'echoProbe' : Probe server by sending the data and response back. 'rtspProbe' : Probe server by sending the RTSP requests. 'snmpProbe' : Probe server by sending the SNMP requests.
Traps / Notifications
- cshMonSocketNormalUse
1.3.6.1.4.1.9.9.508.0.2 - cshMonSocketOveruse
1.3.6.1.4.1.9.9.508.0.1
Groups and compliance
- ciscoSlbHealthMonMIBCompliance
- ciscoSlbHealthMonMIBComplianceRev1
- ciscoSlbHealthMonMIBComplianceRev2
- ciscoSlbHealthMonMIBComplianceRev3
- cshMonNotifGroup
- cshMonNotifObjectsGroup
- cshMonProbeTypeStatsGroup
- cshMonSfarmrealserverProbeStatsGroup
- cshMonSfarmrealserverProbeStatsGroupRev1
- cslbHealthMonFTPProbesGroup
- cslbHealthMonHTTPProbesCommmonGroup
- cslbHealthMonHTTPSProbesGroup
- cslbHealthMonHTTPSProbesGroupRev1
- cslbHealthMonIMAPProbesGroup
- cslbHealthMonProbeCfgExtGroup
- cslbHealthMonProbeScriptGroup
- cslbHealthMonSIPProbesGroup
- cslbHealthMonServerProbesGroup
- cslbHealthMonServerProbesGroupRev1
- cslbHealthMonTFTPProbesGroup