CISCO-RTTMON-ICMP-MIB
ciscoSystemsAn extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such as RTT (Round Trip Time), Jitter, packet loss, one-way latency by sending ICMP TIMESTAMP stream to the destination devices.
snmptranslate -m CISCO-RTTMON-ICMP-MIB -Tpsnmpwalk -v2c -c <community> -m CISCO-RTTMON-ICMP-MIB <host> 1.3.6.1.4.1.9.9.486Imports
| CISCO-RTTMON-MIB | rttMonCtrlAdminIndex, rttMonLatestOper, rttMonStats |
|---|---|
| CISCO-RTTMON-TC-MIB | RttResponseSense |
| CISCO-SMI | ciscoMgmt |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TrttMonIcmpJitterStatsTable | 1.3.6.1.4.1.9.9.42.1.3.8 | NA | |||||||||||
table · not-accessible · current The ICMP Jitter statistics table contains summarized information of the results for a conceptual RTT control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. When rttMonIcmpJitterStatsStartTimeId groups exceeds the rttMonStatisticsAdminNumHourGroups value, the oldest corresponding hourly group will be deleted and will be replaced with the new rttMonIcmpJitterStatsStartTimeId hourly group. The table is created only if the rttMonCtrlAdminRttType is 'icmpJitter' and the rttMonEchoAdminProtocol is 'icmpJitterAppl'. It will be removed when the corresponding conceptual RTT control row is destroyed. | |||||||||||||
| RrttMonIcmpJitterStatsEntry | 1.3.6.1.4.1.9.9.42.1.3.8.1 | NA | |||||||||||
row · not-accessible · current An entry in ICMP jitter stats table. Each entry contains the objects which accumulate the results of a series of RTT operations over a 60 minute time period or a time period stored in rttMonScheduleAdminRttLife, whichever is smaller. | |||||||||||||
| CrttMonIcmpJitterStatsStartTimeId | 1.3.6.1.4.1.9.9.42.1.3.8.1.1 | TimeStamp | NA | ||||||||||
column · TimeStamp · not-accessible · current The value of sysUpTime at the time when this row was created. | |||||||||||||
| CrttMonIcmpJitterStatsCompletions | 1.3.6.1.4.1.9.9.42.1.3.8.1.2 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of ICMP jitter operation that have completed successfully.
| |||||||||||||
| CrttMonIcmpJStatsOverThresholds | 1.3.6.1.4.1.9.9.42.1.3.8.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of ICMP jitter operations that violate jitterAvg threshold which is defined in RttMonReactVar.
| |||||||||||||
| CrttMonIcmpJitterStatsNumRTTs | 1.3.6.1.4.1.9.9.42.1.3.8.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of RTT's that are successfully measured.
| |||||||||||||
| CrttMonIcmpJitterStatsRTTSums | 1.3.6.1.4.1.9.9.42.1.3.8.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of RTT's that are successfully measured for this rttMonIcmpJitterStatsStartTimeId hourly group. The number of the successfully measured RTT is stored in the rttMonIcmpJitterStatsNumRTT.
| |||||||||||||
| CrttMonIcmpJStatsRTTSum2Lows | 1.3.6.1.4.1.9.9.42.1.3.8.1.6 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of RTT's that are successfully measured (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsRTTSum2Highs | 1.3.6.1.4.1.9.9.42.1.3.8.1.7 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of RTT's that are successfully measured (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsRTTMin | 1.3.6.1.4.1.9.9.42.1.3.8.1.8 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of RTT's that were successfully measured.
| |||||||||||||
| CrttMonIcmpJitterStatsRTTMax | 1.3.6.1.4.1.9.9.42.1.3.8.1.9 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of RTT's that were successfully measured.
| |||||||||||||
| CrttMonIcmpJitterStatsMinPosSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.10 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of absolute values of all positive jitter values for packets sent from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsMaxPosSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.11 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of absolute values of all positive jitter values for packets sent from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsNumPosSDs | 1.3.6.1.4.1.9.9.42.1.3.8.1.12 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all positive jitter values for packets sent from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsSumPosSDs | 1.3.6.1.4.1.9.9.42.1.3.8.1.13 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of all positive jitter values for packets sent from source to destination. The number of such values is stored in rttMonIcmpJitterStatsNumPosSD.
| |||||||||||||
| CrttMonIcmpJStatsSum2PosSDLows | 1.3.6.1.4.1.9.9.42.1.3.8.1.14 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of square of all positive jitter values for packets sent from source to destination (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsSum2PosSDHighs | 1.3.6.1.4.1.9.9.42.1.3.8.1.15 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of square of all positive jitter values for packets sent from source to destination (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsMinNegSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.16 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all negative jitter values for packets sent from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsMaxNegSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.17 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all negative jitter values for packets sent from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsNumNegSDs | 1.3.6.1.4.1.9.9.42.1.3.8.1.18 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all negative jitter values for packets sent from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsSumNegSDs | 1.3.6.1.4.1.9.9.42.1.3.8.1.19 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in rttMonIcmpJitterStatsNumNegSD.
| |||||||||||||
| CrttMonIcmpJStatsSum2NegSDLows | 1.3.6.1.4.1.9.9.42.1.3.8.1.20 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of square of all negative jitter values for packets sent from source to destination (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsSum2NegSDHighs | 1.3.6.1.4.1.9.9.42.1.3.8.1.21 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of square of all negative jitter values for packets sent from source to destination (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsMinPosDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.22 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all positive jitter values for packets sent from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsMaxPosDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.23 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all positive jitter values for packets sent from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsNumPosDSes | 1.3.6.1.4.1.9.9.42.1.3.8.1.24 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all positive jitter values for packets sent from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsSumPosDSes | 1.3.6.1.4.1.9.9.42.1.3.8.1.25 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of all positive jitter values for packets sent from destination to source. The number of such values is stored in rttMonIcmpJitterStatsNumPosDS.
| |||||||||||||
| CrttMonIcmpJStatsSum2PosDSLows | 1.3.6.1.4.1.9.9.42.1.3.8.1.26 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of all positive jitter values for packets sent from destination to source (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsSum2PosDSHighs | 1.3.6.1.4.1.9.9.42.1.3.8.1.27 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of all positive jitter values for packets sent from destination to source (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsMinNegDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.28 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all negative jitter values for packets sent from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsMaxNegDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.29 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all negative jitter values for packets sent from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsNumNegDSes | 1.3.6.1.4.1.9.9.42.1.3.8.1.30 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of all negative jitter values for packets sent from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsSumNegDSes | 1.3.6.1.4.1.9.9.42.1.3.8.1.31 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of all negative jitter values for packets sent from destination to source. The number of such values is stored in rttMonIcmpJitterStatsNumNegDS.
| |||||||||||||
| CrttMonIcmpJStatsSum2NegDSLows | 1.3.6.1.4.1.9.9.42.1.3.8.1.32 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of all negative jitter values for packets sent from destination to source (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsSum2NegDSHighs | 1.3.6.1.4.1.9.9.42.1.3.8.1.33 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of all negative jitter values for packets sent from destination to source (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsPktLosses | 1.3.6.1.4.1.9.9.42.1.3.8.1.34 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of lost packets
| |||||||||||||
| CrttMonIcmpJStatsPktOutSeqBoth | 1.3.6.1.4.1.9.9.42.1.3.8.1.35 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets arrived out of sequence in both source-to-destination and destination-to-source direction.
| |||||||||||||
| CrttMonIcmpJStatsPktOutSeqSDs | 1.3.6.1.4.1.9.9.42.1.3.8.1.36 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets arrived out of sequence in the direction of source-to-destination.
| |||||||||||||
| CrttMonIcmpJStatsPktOutSeqDSes | 1.3.6.1.4.1.9.9.42.1.3.8.1.37 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets arrived out of sequence in the direction of destination-to-source.
| |||||||||||||
| CrttMonIcmpJitterStatsPktSkippeds | 1.3.6.1.4.1.9.9.42.1.3.8.1.38 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets that are skipped per operation because the router could not send the packet out.
| |||||||||||||
| CrttMonIcmpJitterStatsErrors | 1.3.6.1.4.1.9.9.42.1.3.8.1.39 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a ICMP jitter operation could not be initiated because of an internal error
| |||||||||||||
| CrttMonIcmpJitterStatsBusies | 1.3.6.1.4.1.9.9.42.1.3.8.1.40 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of occasions when a ICMP jitter operation could not be initiated because a previous ICMP jitter operation has not been completed.
| |||||||||||||
| CrttMonIcmpJitterStatsOWSumSDs | 1.3.6.1.4.1.9.9.42.1.3.8.1.41 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of one way trip time from source to destination.
| |||||||||||||
| CrttMonIcmpJStatsOWSum2SDLows | 1.3.6.1.4.1.9.9.42.1.3.8.1.42 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of one way trip time from source to destination (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsOWSum2SDHighs | 1.3.6.1.4.1.9.9.42.1.3.8.1.43 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of one way trip time from source to destination (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsOWMinSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.44 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all one way trip time from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsOWMaxSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.45 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all one way trip time from source to destination.
| |||||||||||||
| CrttMonIcmpJitterStatsOWSumDSes | 1.3.6.1.4.1.9.9.42.1.3.8.1.46 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of one way trip time from destination to source.
| |||||||||||||
| CrttMonIcmpJStatsOWSum2DSLows | 1.3.6.1.4.1.9.9.42.1.3.8.1.47 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of one way trip time from destination to source (low order 32 bits).
| |||||||||||||
| CrttMonIcmpJStatsOWSum2DSHighs | 1.3.6.1.4.1.9.9.42.1.3.8.1.48 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The sum of squares of one way trip time from destination to source (high order 32 bits).
| |||||||||||||
| CrttMonIcmpJitterStatsOWMinDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.49 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum of all one way trip time from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsOWMaxDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.50 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum of all one way trip time from destination to source.
| |||||||||||||
| CrttMonIcmpJitterStatsNumOWs | 1.3.6.1.4.1.9.9.42.1.3.8.1.51 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of one way trip time that are successfully measured.
| |||||||||||||
| CrttMonIcmpJitterStatsAvgJ | 1.3.6.1.4.1.9.9.42.1.3.8.1.52 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of positive and negative jitter values for source-to-destination and destination-to-source direction.
| |||||||||||||
| CrttMonIcmpJitterStatsAvgJSD | 1.3.6.1.4.1.9.9.42.1.3.8.1.53 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of positive and negative jitter values in source-to-destination direction.
| |||||||||||||
| CrttMonIcmpJitterStatsAvgJDS | 1.3.6.1.4.1.9.9.42.1.3.8.1.54 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The average of positive and negative jitter values in destination-to-source direction.
| |||||||||||||
| CrttMonIcmpJitterMinSucPktLoss | 1.3.6.1.4.1.9.9.42.1.3.8.1.55 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The minimum number of packets that are dropped successively.
| |||||||||||||
| CrttMonIcmpJitterMaxSucPktLoss | 1.3.6.1.4.1.9.9.42.1.3.8.1.56 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The maximum number of packets that are dropped successively.
| |||||||||||||
| CrttMonIcmpJitterStatsIAJOut | 1.3.6.1.4.1.9.9.42.1.3.8.1.57 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Inter-arrival jitter (RFC 1889) at responder
| |||||||||||||
| CrttMonIcmpJitterStatsIAJIn | 1.3.6.1.4.1.9.9.42.1.3.8.1.58 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current Inter-arrival jitter (RFC 1889) at sender
| |||||||||||||
| CrttMonIcmpJitterStatsPktLateAs | 1.3.6.1.4.1.9.9.42.1.3.8.1.59 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of packets that arrived after the timeout.
| |||||||||||||
| TrttMonLatestIcmpJitterOperTable | 1.3.6.1.4.1.9.9.42.1.5.4 | NA | |||||||||||
table · not-accessible · current A table which contains the status of latest ICMP Jitter operation. Each conceptual row corresponds to a ICMP jitter probe defined in rttMonCtrlAdminTable and has same index as rttMonCtrlAdminTable. An entry in this table is created only if the rttMonCtrlAdminRttType is 'icmpJitter', the rttMonEchoAdminProtocol is 'icmpJitterAppl' and valid rttMonEchoAdminTargetAddress is configured. The entry will start to collect data when rttMonCtrlAdminStatus from rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is in 'destroy' state. | |||||||||||||
| RrttMonLatestIcmpJitterOperEntry | 1.3.6.1.4.1.9.9.42.1.5.4.1 | NA | |||||||||||
row · not-accessible · current A list of objects that record the latest ICMP jitter operation.
| |||||||||||||
| CrttMonLatestIcmpJitterNumRTT | 1.3.6.1.4.1.9.9.42.1.5.4.1.1 | Gauge32 | RO | 10 | |||||||||
column · Gauge32 · read-only · current The number of RTT's that were successfully measured.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterRTTSum | 1.3.6.1.4.1.9.9.42.1.5.4.1.2 | Gauge32 | RO | 150 | |||||||||
column · Gauge32 · read-only · current The sum of RTT's that are successfully measured. The number of successfully measured RTT is stored in rttMonLatestIcmpJitterNumRTT.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterRTTSum2 | 1.3.6.1.4.1.9.9.42.1.5.4.1.3 | Gauge32 | RO | 2250 | |||||||||
column · Gauge32 · read-only · current The sum of squares of RTT's that are successfully measured.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterRTTMin | 1.3.6.1.4.1.9.9.42.1.5.4.1.4 | Gauge32 | RO | 15 | |||||||||
column · Gauge32 · read-only · current The minimum of RTT's that were successfully measured.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterRTTMax | 1.3.6.1.4.1.9.9.42.1.5.4.1.5 | Gauge32 | RO | 15 | |||||||||
column · Gauge32 · read-only · current The maximum of RTT's that were successfully measured.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMinPosSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.6 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The minimum of all positive jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMaxPosSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.7 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The maximum of all positive jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterNumPosSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.8 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The number of all positive jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSumPosSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.9 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of all positive jitter values for packets sent source to destination. The number of such values is stored in rttMonLatestIcmpJitterNumPosSD.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSum2PosSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.10 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of square of all positive jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMinNegSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.11 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The minimum of absolute values of all negative jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMaxNegSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.12 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The maximum of absolute values of all negative jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterNumNegSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.13 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The number of all negative jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSumNegSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.14 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in rttMonLatestIcmpJitterNumNegSD.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSum2NegSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.15 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of square of all negative jitter values for packets sent from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMinPosDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.16 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The minimum of all positive jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMaxPosDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.17 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The maximum of all positive jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterNumPosDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.18 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The number of all positive jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSumPosDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.19 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of all positive jitter values for packets sent from destination to source. The number of such values is stored in rttMonLatestIcmpJitterNumPosDS.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSum2PosDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.20 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of squares of all positive jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMinNegDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.21 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The minimum of all negative jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMaxNegDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.22 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The maximum of all negative jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterNumNegDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.23 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The number of all negative jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSumNegDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.24 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of all negative jitter values for packets sent from destination to source. The number of such values is stored in rttMonLatestIcmpJitterNumNegDS.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterSum2NegDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.25 | Gauge32 | RO | 2 | |||||||||
column · Gauge32 · read-only · current The sum of squares of all negative jitter values for packets sent from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterPktLoss | 1.3.6.1.4.1.9.9.42.1.5.4.1.26 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The number of packets lost.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJPktOutSeqBoth | 1.3.6.1.4.1.9.9.42.1.5.4.1.27 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The number of packets arrived out of sequence in both source-to-destination and destination-to-source direction.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJPktOutSeqSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.28 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The number of packets arrived out of sequence in the direction of source-to-destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJPktOutSeqDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.29 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The number of packets arrived out of sequence in the direction of destination-to-source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterPktSkipped | 1.3.6.1.4.1.9.9.42.1.5.4.1.30 | Gauge32 | RO | ||||||||||
column · Gauge32 · read-only · current The number of packets in the operation that could not be initiated due to an internal error.
| |||||||||||||
| CrttMonLatestIcmpJitterSense | 1.3.6.1.4.1.9.9.42.1.5.4.1.31 | RttResponseSense | RO | 1 | |||||||||
column · RttResponseSense · read-only · current An application specific sense code for the completion status. Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterPktLateA | 1.3.6.1.4.1.9.9.42.1.5.4.1.32 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The number of packets that arrived after the timeout.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMinSucPktL | 1.3.6.1.4.1.9.9.42.1.5.4.1.33 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The minimum number of packets that are dropped successively.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterMaxSucPktL | 1.3.6.1.4.1.9.9.42.1.5.4.1.34 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current The maximum number of packets that are dropped successively.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWSumSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.35 | Gauge32 | RO | 53 | |||||||||
column · Gauge32 · read-only · current The sum of one way trip time from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWSum2SD | 1.3.6.1.4.1.9.9.42.1.5.4.1.36 | Gauge32 | RO | 283 | |||||||||
column · Gauge32 · read-only · current The sum of squares of one way trip time from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWMinSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.37 | Gauge32 | RO | 5 | |||||||||
column · Gauge32 · read-only · current The minimum of all one way trip time from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWMaxSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.38 | Gauge32 | RO | 6 | |||||||||
column · Gauge32 · read-only · current The maximum of all one way trip time from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWSumDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.39 | Gauge32 | RO | 95 | |||||||||
column · Gauge32 · read-only · current The sum of one way trip time from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWSum2DS | 1.3.6.1.4.1.9.9.42.1.5.4.1.40 | Gauge32 | RO | 905 | |||||||||
column · Gauge32 · read-only · current The sum of squares of one way trip time from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWMinDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.41 | Gauge32 | RO | 9 | |||||||||
column · Gauge32 · read-only · current The minimum of all one way trip time from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWMaxDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.42 | Gauge32 | RO | 10 | |||||||||
column · Gauge32 · read-only · current The maximum of all one way trip time from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterNumOW | 1.3.6.1.4.1.9.9.42.1.5.4.1.43 | Gauge32 | RO | 10 | |||||||||
column · Gauge32 · read-only · current The number of successful one way trip time measurements.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterAvgJitter | 1.3.6.1.4.1.9.9.42.1.5.4.1.44 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The average of positive and negative jitter values in Source-to-Destionation and Destination-to-Source direction.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterAvgSDJ | 1.3.6.1.4.1.9.9.42.1.5.4.1.45 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The average of positive and negative jitter values from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterAvgDSJ | 1.3.6.1.4.1.9.9.42.1.5.4.1.46 | Gauge32 | RO | 1 | |||||||||
column · Gauge32 · read-only · current The average of positive and negative jitter values from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWAvgSD | 1.3.6.1.4.1.9.9.42.1.5.4.1.47 | Gauge32 | RO | 5 | |||||||||
column · Gauge32 · read-only · current The average one way trip time from source to destination.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterOWAvgDS | 1.3.6.1.4.1.9.9.42.1.5.4.1.48 | Gauge32 | RO | 9 | |||||||||
column · Gauge32 · read-only · current The average one way trip time from destination to source.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterIAJOut | 1.3.6.1.4.1.9.9.42.1.5.4.1.49 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current Inter-arrival jitter (RFC 1889) at responder.
Example values from LibreNMS test devices
| |||||||||||||
| CrttMonLatestIcmpJitterIAJIn | 1.3.6.1.4.1.9.9.42.1.5.4.1.50 | Gauge32 | RO | 0 | |||||||||
column · Gauge32 · read-only · current Inter-arrival jitter (RFC 1889) at source.
Example values from LibreNMS test devices
| |||||||||||||
| IciscoRttMonIcmpMIB | 1.3.6.1.4.1.9.9.486 | ||||||||||||
identity An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such as RTT (Round Trip Time), Jitter, packet loss, one-way latency by sending ICMP TIMESTAMP stream to the destination devices. | |||||||||||||
| NciscoRttMonIcmpMIBNotifs | 1.3.6.1.4.1.9.9.486.0 | ||||||||||||
| NciscoRttMonIcmpMIBObjects | 1.3.6.1.4.1.9.9.486.1 | ||||||||||||
| NciscoRttMonIcmpMIBConform | 1.3.6.1.4.1.9.9.486.2 | ||||||||||||
| NciscoRttMonIcmpCompliances | 1.3.6.1.4.1.9.9.486.2.1 | ||||||||||||
| MciscoRttMonIcmpJitterCompliance | 1.3.6.1.4.1.9.9.486.2.1.1 | ||||||||||||
compliance · current The compliance statement for (1) ICMP Jitter operation and statistics
| |||||||||||||
| NciscoRttMonIcmpMIBGroups | 1.3.6.1.4.1.9.9.486.2.2 | ||||||||||||
| GciscoRttMonIcmpJitterGroup | 1.3.6.1.4.1.9.9.486.2.2.1 | ||||||||||||
group · current A collection of statistics objects related to ICMP Jitter Probe.
| |||||||||||||