MIB Browser

CISCO-RF-MIB

ciscoSystems
Added descriptions for enums 8 and 9 in RFSwactReasonType
Organization
Cisco Systems, Inc.
Root OID
1.3.6.1.4.1.9.9.176
Last updated
Objects
85
Source
Show full MIB
snmptranslate -m CISCO-RF-MIB -Tp
snmpwalk -v2c -c <community> -m CISCO-RF-MIB <host> 1.3.6.1.4.1.9.9.176

Imports

CISCO-SMIciscoMgmt
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-MIBsysUpTime
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue

OID tree

NameOIDTypeAccessStatusExample
IciscoRFMIB1.3.6.1.4.1.9.9.176
NciscoRFMIBObjects1.3.6.1.4.1.9.9.176.1
NcRFStatus1.3.6.1.4.1.9.9.176.1.1
ScRFStatusUnitId1.3.6.1.4.1.9.9.176.1.1.1RFUnitIdentifierRO1
ScRFStatusUnitState1.3.6.1.4.1.9.9.176.1.1.2RFStateRO14
ScRFStatusPeerUnitId1.3.6.1.4.1.9.9.176.1.1.3RFUnitIdentifierRO0
ScRFStatusPeerUnitState1.3.6.1.4.1.9.9.176.1.1.4RFStateRO2
ScRFStatusPrimaryMode1.3.6.1.4.1.9.9.176.1.1.5TruthValueRO1
ScRFStatusDuplexMode1.3.6.1.4.1.9.9.176.1.1.6TruthValueRO2
ScRFStatusManualSwactInhibit1.3.6.1.4.1.9.9.176.1.1.7TruthValueRO1
ScRFStatusLastSwactReasonCode1.3.6.1.4.1.9.9.176.1.1.8RFSwactReasonTypeRO2
ScRFStatusFailoverTime1.3.6.1.4.1.9.9.176.1.1.9TimeStampRO0 (0d 0h 0m 0s)
ScRFStatusPeerStandByEntryTime1.3.6.1.4.1.9.9.176.1.1.10TimeStampRO0 (0d 0h 0m 0s)
TcRFStatusRFModeCapsTable1.3.6.1.4.1.9.9.176.1.1.11NA
RcRFStatusRFModeCapsEntry1.3.6.1.4.1.9.9.176.1.1.11.1NA
CcRFStatusRFModeCapsMode1.3.6.1.4.1.9.9.176.1.1.11.1.1RFModeNA
CcRFStatusRFModeCapsModeDescr1.3.6.1.4.1.9.9.176.1.1.11.1.2SnmpAdminStringRONon-redundant
ScRFStatusIssuState1.3.6.1.4.1.9.9.176.1.1.12RFIssuStateROdeprecated0
ScRFStatusIssuStateRev11.3.6.1.4.1.9.9.176.1.1.13RFIssuStateRev1RO0
ScRFStatusIssuFromVersion1.3.6.1.4.1.9.9.176.1.1.14SnmpAdminStringRO
ScRFStatusIssuToVersion1.3.6.1.4.1.9.9.176.1.1.15SnmpAdminStringRO
NcRFCfg1.3.6.1.4.1.9.9.176.1.2
ScRFCfgSplitMode1.3.6.1.4.1.9.9.176.1.2.1TruthValueRWdeprecated2
ScRFCfgKeepaliveThresh1.3.6.1.4.1.9.9.176.1.2.2Unsigned32RW7
ScRFCfgKeepaliveThreshMin1.3.6.1.4.1.9.9.176.1.2.3Unsigned32RO2
ScRFCfgKeepaliveThreshMax1.3.6.1.4.1.9.9.176.1.2.4Unsigned32RO9
ScRFCfgKeepaliveTimer1.3.6.1.4.1.9.9.176.1.2.5Unsigned32RW4000
ScRFCfgKeepaliveTimerMin1.3.6.1.4.1.9.9.176.1.2.6Unsigned32RO200
ScRFCfgKeepaliveTimerMax1.3.6.1.4.1.9.9.176.1.2.7Unsigned32RO9000
ScRFCfgNotifTimer1.3.6.1.4.1.9.9.176.1.2.8Unsigned32RW30000
ScRFCfgNotifTimerMin1.3.6.1.4.1.9.9.176.1.2.9Unsigned32RO8000
ScRFCfgNotifTimerMax1.3.6.1.4.1.9.9.176.1.2.10Unsigned32RO30000
ScRFCfgAdminAction1.3.6.1.4.1.9.9.176.1.2.11RFActionRW0
ScRFCfgNotifsEnabled1.3.6.1.4.1.9.9.176.1.2.12TruthValueRW2
ScRFCfgMaintenanceMode1.3.6.1.4.1.9.9.176.1.2.13TruthValueRW2
ScRFCfgRedundancyMode1.3.6.1.4.1.9.9.176.1.2.14RFModeRW8
ScRFCfgRedundancyModeDescr1.3.6.1.4.1.9.9.176.1.2.15SnmpAdminStringROsso
ScRFCfgRedundancyOperMode1.3.6.1.4.1.9.9.176.1.2.16RFModeRO1
NcRFHistory1.3.6.1.4.1.9.9.176.1.3
ScRFHistoryTableMaxLength1.3.6.1.4.1.9.9.176.1.3.1Unsigned32 (0..50)RW10
TcRFHistorySwitchOverTable1.3.6.1.4.1.9.9.176.1.3.2NA
RcRFHistorySwitchOverEntry1.3.6.1.4.1.9.9.176.1.3.2.1NA
CcRFHistorySwitchOverIndex1.3.6.1.4.1.9.9.176.1.3.2.1.1Unsigned32 (1..4294967295)NA
CcRFHistoryPrevActiveUnitId1.3.6.1.4.1.9.9.176.1.3.2.1.2RFUnitIdentifierRO
CcRFHistoryCurrActiveUnitId1.3.6.1.4.1.9.9.176.1.3.2.1.3RFUnitIdentifierRO
CcRFHistorySwitchOverReason1.3.6.1.4.1.9.9.176.1.3.2.1.4RFSwactReasonTypeRO
CcRFHistorySwactTime1.3.6.1.4.1.9.9.176.1.3.2.1.5DateAndTimeRO
ScRFHistoryColdStarts1.3.6.1.4.1.9.9.176.1.3.3Counter32RO28
ScRFHistoryStandByAvailTime1.3.6.1.4.1.9.9.176.1.3.4TimeIntervalRO0
NcRFClient1.3.6.1.4.1.9.9.176.1.4
TcRFStatusRFClientTable1.3.6.1.4.1.9.9.176.1.4.1NA
RcRFStatusRFClientEntry1.3.6.1.4.1.9.9.176.1.4.1.1NA
CcRFStatusRFClientID1.3.6.1.4.1.9.9.176.1.4.1.1.1Unsigned32 (1..4294967295)NA
CcRFStatusRFClientDescr1.3.6.1.4.1.9.9.176.1.4.1.1.2SnmpAdminStringRO
CcRFStatusRFClientSeq1.3.6.1.4.1.9.9.176.1.4.1.1.3Unsigned32RO
CcRFStatusRFClientRedTime1.3.6.1.4.1.9.9.176.1.4.1.1.4Unsigned32RO
CcRFStatusRFClientStatus1.3.6.1.4.1.9.9.176.1.4.1.1.5RFClientStatusRO
NciscoRFMIBNotificationsPrefix1.3.6.1.4.1.9.9.176.2
NciscoRFMIBNotifications1.3.6.1.4.1.9.9.176.2.0
!ciscoRFSwactNotif1.3.6.1.4.1.9.9.176.2.0.1
!ciscoRFProgressionNotif1.3.6.1.4.1.9.9.176.2.0.2
!ciscoRFIssuStateNotif1.3.6.1.4.1.9.9.176.2.0.3deprecated
!ciscoRFIssuStateNotifRev11.3.6.1.4.1.9.9.176.2.0.4
NciscoRFMIBConformance1.3.6.1.4.1.9.9.176.3
NciscoRFMIBCompliances1.3.6.1.4.1.9.9.176.3.1
MciscoRFMIBCompliance1.3.6.1.4.1.9.9.176.3.1.1deprecated
MciscoRFMIBComplianceRev11.3.6.1.4.1.9.9.176.3.1.2deprecated
MciscoRFMIBComplianceRev21.3.6.1.4.1.9.9.176.3.1.3deprecated
MciscoRFMIBComplianceRev31.3.6.1.4.1.9.9.176.3.1.4deprecated
MciscoRFMIBComplianceRev41.3.6.1.4.1.9.9.176.3.1.5deprecated
MciscoRFMIBComplianceRev51.3.6.1.4.1.9.9.176.3.1.6
NciscoRFMIBGroups1.3.6.1.4.1.9.9.176.3.2
GciscoRFStatusGroup1.3.6.1.4.1.9.9.176.3.2.1deprecated
GciscoRFConfigGroup1.3.6.1.4.1.9.9.176.3.2.2deprecated
GciscoRFNotifGroup1.3.6.1.4.1.9.9.176.3.2.3
GciscoRFConfigGroupRev11.3.6.1.4.1.9.9.176.3.2.4
GciscoRFStatusGroupRev11.3.6.1.4.1.9.9.176.3.2.5
GciscoRFHistoryGroup1.3.6.1.4.1.9.9.176.3.2.6
GciscoRFConfigRFOperModeGroup1.3.6.1.4.1.9.9.176.3.2.7
GciscoRFStatusRFModeCapsGroup1.3.6.1.4.1.9.9.176.3.2.8
GciscoRFIssuStateNotifGroup1.3.6.1.4.1.9.9.176.3.2.9deprecated
GciscoRFIssuStateNotifGroupRev11.3.6.1.4.1.9.9.176.3.2.10
GciscoRFIssuStateObjGroup1.3.6.1.4.1.9.9.176.3.2.11deprecated
GciscoRFIssuStateObjGroupRev11.3.6.1.4.1.9.9.176.3.2.12
GciscoRFStatusClientGroup1.3.6.1.4.1.9.9.176.3.2.13

Textual conventions

RFAction INTEGER

forceSwitchActivity(4) noAction(0) reloadPeer(1) reloadShelf(2) switchActivity(3)

Administrative commands to invoke in the RF subsystem.

noAction
    - no action (do nothing)
reloadPeer
    - reset the redundant peer unit
reloadShelf
    - reset the entire shelf
switchActivity
    - safely SWACT to peer unit and go standby
forceSwitchActivity
    - switch activity; ignoring pre-conditions, system
      warnings and safety checks.

When the value is set to 'noAction' no operation is performed.
When read, the value 'noAction' is always returned.
RFClientStatus INTEGER

clientNotRedundant(2) clientRedundancyInProgress(3) clientRedundant(4) noStatus(1)

The status of a RF client before, during and after
switchover.

noStatus
    - No status information is available for this client.
clientNotRedundant
    - Client is active. But there is no redundancy to this
      client. This could be because there is no standby or
      the client cannot claim that the standby client can
      take over without losing data or traffic during a
      switchover.
clientRedundancyInProgress
    - The client is trying to sync all data to standby and
      achieve redundancy.
clientRedundant
    - The client is redundant and ready for switchover. The
      client can safely claim that there is no data or traffic
      loss if there is a switchover.
RFIssuState INTEGER

commitVersion(4) init(1) loadVersion(2) runVersion(3) unset(0)

ISSU state represents the current system state.

unset
    - unset state; if the system is booted from tftp or from
      ROMMON such that the image is not the first in BOOT
init
    - init state; the first ISSU state that the system will
      move to after the unset state, when the ISSU process
      has just been kicked off. The first CLI that is executed
      to make this happen is the loadversion CLI.
loadVersion
    - Once the loadversion CLI has been executed, the state
      of the system is changed to reflect this, and this state
      is called the loadVersion state. The boot variable on
      the Standby is updated to point to the new image that the
      Standby needs to load and then it is reset.
runVersion
    - runVersion state; When the system is in the loadversion
      state, the Active is running the old image and the
      Standby is running the new image. When the runversion
      CLI is executed, a switchover occurs, and the Standby
      running the new image takes over as the Active. The
      state of the system at this stage is updated to
      runversion.
commitVersion
    - in the runversion state, the Active is running the
      new image, and the Standby is running the old image.
      When the user is satisfied with the functioning of
      the system, they execute the commitversion CLI, which
      will prepend the boot variable on the Standby with
      the new image, and then the Standby is reset. After
      this, the Standby comes up with the new image, and
      the state of the system is updated to reflect the
      commitVersion state.
RFIssuStateRev1 INTEGER

commitVersion(9) init(0) loadVersion(3) loadVersionSwitchover(4) runVersion(6) runVersionSwitchover(7) systemReset(1)

ISSU state represents the current system state.

init
    - This state represents the initial state of the system.
      The ISSU process is not running at this stage. The only
      CLI for ISSU process that can be executed in this state
      is the loadversion CLI.
systemReset
    - If a system reset occurs, or the abortversion CLI is
      executed, the state of the system is pushed to this state.
loadVersion
    - When the Standby signs in after the loadversion CLI
      is executed, the state of the system is changed to
      loadVersion.
loadVersionSwitchover
    - If a switchover occurs in the loadVersion state, by
      the user, or because the Active crashes, the new
      state of the system will be loadVersionSwitchover.
      It is analogous to the runVersion state, except that
      the runversion CLI was not executed.
runVersion
    - When the Standby signs in after executing the
      runversion CLI, the state of the system is changed
      to runVersion.
runVersionSwitchover
    - if a switchover occurs while the system is in the
      runVersion state, the new state will be called
      runVersionSwitchover. It is analogous to the
      loadVersion state.
commitVersion
    - When the Standby signs in after the commitversion CLI
      is executed, the state of the system is changed to
      commitVersion.
RFMode INTEGER

coldStandbyRedundant(6) dynamicLoadShareNonRedundant(3) dynamicLoadShareRedundant(5) hotStandbyRedundant(8) nonRedundant(1) staticLoadShareNonRedundant(2) staticLoadShareRedundant(4) warmStandbyRedundant(7)

The characterization of the redundancy subsystem.

nonRedundant
    - the system is not redundant.
staticLoadShareNonRedundant
    - the system is *not* redundant but is load sharing.
      The load sharing is *not* based on operational load
      (i.e. number of calls, etc).
dynamicLoadShareNonRedundant
    - the system is *not* redundant but is load sharing.
      Load sharing is based on operational load.
staticLoadShareRedundant
    - the system is redundant and is load sharing. The
      load sharing is *not* based on operational load.
dynamicLoadShareRedundant
    - the system is redundant and is load sharing. Load
      sharing is based on operational load.
coldStandbyRedundant
    - the system is redundant but the redundant peer unit is
      not fully initialized and is not able to retain
      established calls.
warmStandbyRedundant
    - the system is redundant and the redundant peer unit is
      immediately able to handle new calls. The redundant
      unit is unable to retain established calls.
hotStandbyRedundant
    - the system is redundant and the redundant peer unit is
      able to 'instantaneously' retain established calls and
      immediately able to handle new calls.
RFState INTEGER

active(14) activeDrain(11) activeExtraload(15) activeFast(10) activeHandback(16) activePostconfig(13) activePreconfig(12) disabled(2) initialization(3) negotiation(4) notKnown(1) standbyCold(5) standbyColdBulk(8) standbyColdConfig(6) standbyColdFileSys(7) standbyHot(9) standbyWarm(17)

The current state of the RF subsystem.

notKnown
    - state is unknown
disabled
    - RF is not operational on this unit
initialization
    - establish necessary system services
negotiation
    - peer unit discovery and negotiation
standbyCold
    - client notification on standby unit
*standbyColdConfig
    - standby configuration is updated from active configuration
*standbyColdFileSys
    - standby file system (FS) is updated from the active FS
*standbyColdBulk
    - clients sync data from active to standby
standbyHot
    - incremental client data sync continues. This unit is
      ready to take over activity.
activeFast
    - call maintenance efforts during a SWACT
activeDrain
    - client clean-up phase
activePreconfig
    - unit is active but has not read its configuration
activePostconfig
    - unit is active and is post-processing its configuration
active
    - unit is active and processing calls
activeExtraload
    - unit is active and processing calls for all feature
      boards in the system
activeHandback
    - unit is active, processing calls and is in the process
      of handing some resources to the other unit in the system
standbyWarm
    - unit is ready when using RPR+ mode

* Sub-state of 'standbyCold'
RFSwactReasonType INTEGER

activeGWdown(8) activeRMIportdown(9) activeUnitFailed(6) activeUnitRemoved(7) none(2) notKnown(3) unsupported(1) userForced(5) userInitiated(4)

Reason codes for the switch of activity from an active
redundant unit to its standby peer unit.

unsupported
    - the 'reason code' is an unsupported feature
none
    - no SWACT has occurred
notKnown
    - reason is unknown
userInitiated
    - a safe, manual SWACT was initiated by user
userForced
    - a manual SWACT was forced by user; ignoring
      pre-conditions, warnings and safety checks
activeUnitFailed
    - active unit failure caused an auto SWACT
activeUnitRemoved
    - active unit removal caused an auto SWACT
activeGWdown
    - SWACT due to active losing gateway connectivity
activeRMIportdown
    - SWACT due to RMI port going down on active
RFUnitIdentifier Integer32 (0..2147483647)
A unique identifier for Active/Standby unit.